Evaluation of Electrode Materials for All-copper Hybrid Flow Batteries

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Puiki, Leung and Jesus, Palma and Enrique, Garcia-Quismondo and Laura, Sanz and Mohd Rusllim, Mohamed and Marc, Anderson (2016) Evaluation of Electrode Materials for All-copper Hybrid Flow Batteries. Journal of Power Sources, 310 . pp. 1-11. ISSN 0378-7753

[img] PDF
Restricted to Repository staff only

1992Kb

Official URL: http://dx.doi.org/10.1016/j.jpowsour.2015.12.069

Abstract

This work evaluates a number of two- and three-dimensional electrodes for the reactions of an all-copper hybrid flow battery. Half- and full-cell experiments are conducted by minimizing the crossover effect of the copper(II) species. The battery incorporates a Nafion® cation exchange membrane and the negative electrolyte is maintained at the monovalent (colourless) state by the incorporating copper turnings in the electrolyte reservoir. Under such conditions, the half-cell coulombic efficiencies of the negative electrode reactions are all higher than 90% regardless of electrode materials and the state-of-charge (SOC). With charge–discharge cycling the half-cell from a 0% SOC, the coulombic efficiencies of the positive electrode reactions are lower than 76% with the planar carbon electrode, which further decrease in shorter charge–discharge cycles. Polarization and half-cell charge–discharge experiments suggest that the high-surface-area electrodes effectively reduce the overpotentials and improve the coulombic efficiencies of both electrode reactions. When copper fibres and carbon felt are used as the negative and positive electrodes, the average coulombic and voltage efficiencies of an all-copper flow battery are as high as c.a. 99% and c.a. 60% at 50 mA cm−2 for 35 cycles.

Item Type:Article
Uncontrolled Keywords:Copper; Electrodeposition; Flow battery; Polarizations; Three-dimensional electrodes
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Faculty of Electrical & Electronic Engineering
ID Code:11978
Deposited By: Mrs. Neng Sury Sulaiman
Deposited On:21 Mar 2016 14:16
Last Modified:11 Apr 2018 10:50

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my