The Influence of Process Parameters on Stability Of Water-In-Crude Oil Emulsion Stabilized by Span 80

Akbari, Sweeta and Nour, A. H. and Fayaz, Fahim (2015) The Influence of Process Parameters on Stability Of Water-In-Crude Oil Emulsion Stabilized by Span 80. International Journal of Engineering Sciences & Research Technology, 4 (5). pp. 526-534. ISSN 2277-9655. (Published)

[img]
Preview
PDF
fkksa-2015-Sweeta-Influence of Process Parameters on Stability.pdf

Download (637kB) | Preview

Abstract

There is a wide range of scientific literature related to emulsion stability, most of them dealt with water-in-oil (W/O) or oil-in-water (O/W) type. The present work is aimed to investigate the stability mechanisms of water-in-crude oil emulsion stabilized by a non-ionic emulsifier (Span 80). The blending of (50-50 vol. %) heavy and light crude oil was first characterized in terms of physico-chemical properties. The emulsion was stabilized by (1.5 and 2.5 vol. %) emulsifier at different water: oil ratio of (20-80 vol. %) and (40-60 vol. %). According to the result of microscopy images, the steric stability was obtained in low water volume fraction content (20%), with the smaller droplet sizes and at higher surfactant concentration (2.5%). The emulsions stabilized with Span 80 obtained a visually stable emulsion in both concentrations of emulsifier and volume fractions of dispersed phase (water) in a period of one week,and there was no water separation was observed in this period. To determine the dynamic viscosity rate, the temperature was varied from 30 ºC to 90 ºC and shear rate from (17 to 85)1/sec respectively. Moreover, the emulsion with the higher water volume fraction (40%) and emulsifier concentration of 2.5 % indicated higher dynamic viscosity.However, in all types of the samples, the dynamic viscosity decreased by increasing the shear rate. The results obtained in this study have exposed the capability of the chosen emulsifier as another promising method for stabilizing w/o emulsions. Further works are, nevertheless, required to provide deeper understanding of the mechanisms involved to facilitate the development of an optimum system applicable to the industry

Item Type: Article
Uncontrolled Keywords: W/O emulsions, Stability, Span 80, rheology, Droplet size
Subjects: T Technology > TP Chemical technology
Faculty/Division: Faculty of Chemical & Natural Resources Engineering
Institute of Postgraduate Studies
Depositing User: Noorul Farina Arifin
Date Deposited: 04 Apr 2016 02:04
Last Modified: 03 Oct 2019 08:03
URI: http://umpir.ump.edu.my/id/eprint/12621
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item