Oil-in-water emulsion technique enhancement for viscous crude oil flow in pipelines

Muhammad Fawwaz, Abdul Wahab (2015) Oil-in-water emulsion technique enhancement for viscous crude oil flow in pipelines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

[img]
Preview
Pdf
Oil-in-water emulsion technique enhancement for viscous crude oil flow in pipelines.pdf

Download (7MB) | Preview

Abstract

The production of heavy crude oil is limited due to its high viscosity. It is expected to increase in the future as low viscosity crudes are depleted. The high viscosity lead to the increasing of pump energy as it creates high pressure drop. In order to reduce the viscosity of the heavy crude, it is suggested to mix it with water and optimum emulsifiers to create a lower viscous fluid, oil-in-water (O/W) emulsions. In this study, both chemical and physical properties of O/W emulsion that is prepared by using cocoamide DEA (non-ionic and biodegradable surfactant that synthesis from coconut oil) and two types of conventional chemical emulsifiers (Span 80 and Triton X-100) were investigated. O/W emulsions with three different ratios (50 - 50% and 65 - 35% and 80 - 20%) were prepared at a mixing speed of 2000 rpm with the concentrations of (1.0 wt%, 1.5 wt% and 2.0 wt%) of each emulsifier. These emulsions were tested for relative rates of water separation (stability test), viscosity, shear stress and shear rate at room temperature and stirring speed of Brookfield viscometer. While the droplet size was carried out by using Carl Zeiss Research Microscope and its software. Result shows that Span 80 at 1.0 wt% mixed at each ratio of 50 - 50%, 65 - 35% and 80 - 20% O/W with 2000 rpm mixing speed obtained the most stable emulsions for transportation compared to the other emulsifiers. Demulsification is the process of separation of water from crude oil. Crude oil needs to be separated efficiently and quickly from the water to allow further treatment. This is to ensure the crude oil value can be maximized and the operating cost can be minimized. Demulsifiers (Hexylamine, Cocamide MEA and Dioctylamine) with different concentrations (1.0 wt%, 1.5% and 2.0 wt%) were used for demulsification. The relative rates of water separation were characterized via beaker test.

Item Type: Undergraduates Project Papers
Additional Information: Faculty of Chemical & Natural Resources Engineering Project Paper (Bachelors of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang – 2015; SV:PROF ABDURAHMAN HAMID NOUR; NO.CD:9535
Uncontrolled Keywords: Transportation; Demulsification; O/w stabilization; Biodegradable; Cocoamine
Subjects: Q Science > Q Science (General)
T Technology > TP Chemical technology
Faculty/Division: Faculty of Chemical & Natural Resources Engineering
Depositing User: Ms. Nurezzatul Akmal Salleh
Date Deposited: 07 Apr 2016 08:02
Last Modified: 18 Oct 2023 07:05
URI: http://umpir.ump.edu.my/id/eprint/12739
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item