Sewage Water Treatment by Electrocoagulation Process

Mohd, Nasrullah and Zularisam, A. W. and Fadzil, Mat Yahaya (2012) Sewage Water Treatment by Electrocoagulation Process. International Journal of Civil Engineering and Geo-Environmental, 3. pp. 41-45. ISSN 2180-2742. (Published)

[img] PDF
Sewage Water Treatment by Electrocoagulation Process.pdf - Published Version
Restricted to Repository staff only

Download (1MB) | Request a copy

Abstract

Treatment of wastewater from sewage water by electrocoagulation (EC) was investigated. Experiments were conducted to determine the optimum operating conditions such as electrode type, pH, current density and operation time. Aluminium and mild steel electrodes were used, and aluminium electrodes were found to be more suitable since it had a higher removal rate of Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD) and Suspended Solids (SS) than the mild steel electrode. The removal efficiencies of COD and BOD and SS were high, being 92.5%, 91.5% and 90.5%, respectively, with retention time 60 minutes. pH range between 3 to 11 was investigated during EC process and the optimum condition for pH was 7. Low current densities of 4.17 mA/cm2 , 8.33 mA/cm2 , 12.5 mA/cm2, 20.83 mA/cm2 and 25 mA/cm2 have been used in this experiment and the optimum current density of 25 mA/cm2 was obtained.

Item Type: Article
Uncontrolled Keywords: Electrocoagulation; Sewage water; Current densities; pH; COD; BOD; SS
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Faculty/Division: Faculty of Civil Engineering & Earth Resources
Depositing User: Mrs. Neng Sury Sulaiman
Date Deposited: 20 Feb 2017 02:03
Last Modified: 16 Jan 2018 04:02
URI: http://umpir.ump.edu.my/id/eprint/14509
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item