Effects of Sintering Temperatures on Microstructures and Mechanical Properties of Sn4.0Ag0.5Cu1.0Ni Solder Alloy

Siti Rabiatull Aisha, Idris and Nadhrah, Murad and M., Ishak (2016) Effects of Sintering Temperatures on Microstructures and Mechanical Properties of Sn4.0Ag0.5Cu1.0Ni Solder Alloy. In: 2016 IEEE 37th International Electronics Manufacturing Technology (IEMT) & 18th Electronics Materials and Packaging (EMAP) Conference, 20-22 September 2016 , Penang, Malaysia. pp. 1-7..

[img] PDF
PAPER #76 IEMT 2016_NADHRAH MURAD.pdf
Restricted to Repository staff only

Download (1MB) | Request a copy
[img]
Preview
PDF
effects of sintering1.pdf

Download (35kB) | Preview

Abstract

This research was carried out to investigate the effects of sintering temperature on the properties of Sn-4.0Ag-0.5Cu-1.0Ni solder alloy by varying the temperatures. The Sn-4.0Ag-0.5Cu-1.0Ni solder alloy was prepared by using powder metallurgy method by press and sinter routes. 99.9% of pure Sn, Ag, Cu and Ni powder were used in this research where the pre-mixed powder undergoing milling process for 6 hours using a planetary ball machine. Hydraulic press machine was used to compact the solder powder at identically 5 tons(125 bars) for all samples. Five different temperatures of sintering specifically at 120℃, 150℃, 180℃, 220℃ and 250℃ were used. Characterizations on the microstructures such as grain size, thickness of intermetallic compound and, wettability angle were carried out using Scanning Electron Microscopy. Meanwhile, properties of the solder alloy were also evaluated through hardness and tensile test. It is expected that sintering process could be able to improve the strength of the solder joint by decreasing the intermetallic compound grain size. So far, most papers commonly used 180℃ as their sintering parameter without anyone providing the promising findings and various effects of the temperature onto solder. Therefore, this work is conducted to make a clarification and be the pilot study for the next sintering works for soldering. This paper reports experimental results of properties of Sn-4.0Ag-0.5Cu-1.0Ni solder alloy at different sintering temperatures.

Item Type: Conference or Workshop Item (Paper)
Uncontrolled Keywords: Temperature, Microstructure, Powders, Mechanical factors, Nickel, Soldering
Subjects: Q Science > Q Science (General)
Faculty/Division: Faculty of Mechanical Engineering
Depositing User: Dr. Siti Rabiatull Aisha Idris
Date Deposited: 10 Apr 2017 07:52
Last Modified: 15 Jan 2018 07:31
URI: http://umpir.ump.edu.my/id/eprint/16233
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item