Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

D., Ramasamy and K., Kadirgama and M. M., Noor (2017) Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine. Defect and Diffusion Forum, 370 . pp. 19-28. ISSN 1662-9507


Official URL: https://www.scientific.net/DDF.370.19


Current engines are readily available for CNG bi-fuel conversions because it requires only minor engine modifications. However, CNG flame speed is lower than gasoline, therefore reducing the power and range of the vehicle when operating on CNG. This situation can be improved by increasing the flame speed via higher turbulence generated by swirl motion. A computational fluid dynamics (CFD) model was used to analyse the swirl generated by dissimilar valve lift (DVL) profiles on the intake valve. A 3D engine simulation shows differences in swirl motion and turbulence between the original symmetric valve lift profile and the DVL. The swirl before combustion was found to increase almost 25%. The higher swirl number can increase the turbulence kinetic energy (TKE) level which improves better fuel mixing. The 1 mm DVL proved to be the better choice from CFD analysis and later was tested on a K3-VE engine. Pressure analysis shows peak pressure increased by 5.6% and burn rate shows CNG had a slower burning speed on the small engine

Item Type:Article
Additional Information:10th International Conference On Advanced Computational Engineering And Experimenting (ACEX 2016), Split, Croatia, 2-7 July 2016
Uncontrolled Keywords:Bi-Fuel, Burn Rate, CFD, Dynamometer, Natural Gas
Subjects:T Technology > TL Motor vehicles. Aeronautics. Astronautics
Divisions:Automotive Engineering Centre
Faculty of Mechanical Engineering
ID Code:18598
Deposited By: Dr Devarajan Ramasamy
Deposited On:27 Oct 2017 12:11
Last Modified:31 Jan 2018 07:57

Repository Staff Only: item control page








An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.

Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my