PC based control smart home system using Zigbee wireless technology

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Thanikaikumaran, R. Kuppusamy (2010) PC based control smart home system using Zigbee wireless technology. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

[img]
Preview
PDF
4Mb

Official URL: http://iportal.ump.edu.my/lib/item?id=chamo:54821&...

Abstract

Nowadays, automation system becomes the best solution to overcome human problem which is always forget to switch off the electrical appliances. As we know, there are a lot of types of the automation system which is too expensive and difficult to use. For that reason, an automation system at low cost is built where; user can also program the automated system by their own. The purpose of this project is to design an automation system that can be used to switch ON, OFF and get know STATUS of the electrical appliances by using personal computer. This project focusing developing an automation system with Zigbee wireless technology which is controlled by programmable interface controller (PIC18F14K50). This overall project is divided into two parts. The first part is concern on the hardware development where all electronic components are connected on a single board. Personal computer is the input component while fluorescent lamp and fan are the output component where it’s all controlled by controller circuit. Zigbee is a new technology, which has at its centre the goal of eliminating wired connections between home appliances and personal computer. Instead of connecting with wires, every appliance has small transmitters or receivers. The second part is base on software programming to operate the hardware structure. There two types of programs are used for this project. C language is the program used for PIC18F14K50. C language assembles using CCS C Compiler to get the hex file. The hex file loaded into PIC memory using PIC kit 2 burners. C # is another program that used for create GUI for personal computer .In order to achieve better automation system, the security system can be added to this project where more sensor and load can be connected to the PIC serial port. As the result, the PIC capable to control the whole operation of this automation system.

Item Type:Undergraduates Project Papers
Uncontrolled Keywords:Home automation Home computer network Wireless communication systems
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Faculty of Electrical & Electronic Engineering
ID Code:2021
Deposited By: Syed Mohd Faiz
Deposited On:30 Dec 2011 13:43
Last Modified:03 Mar 2015 15:54

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my