Respirometric analysis of activated sludge models from palm oil mill effluent

Damayanti, A. and Mohamed, Z. and Salim, M.R, and G., Olsson and Ahmad Ziad, Sulaiman (2009) Respirometric analysis of activated sludge models from palm oil mill effluent. Bioresource Technology. pp. 144-149. (Published)

	PDF - Published Version Download (0B)
Preview	PDF Dr.A.Ziad_SD2.pdf Download (537kB)

Abstract

Activated sludge models (ASMs) have been widely used as a basis for further model development in wastewater treatment processes. Values for parameters to be used are vital for the accuracy of the modeling approach. A continuous stirred tank reactor (CSTR), as open respirometer with continuous flow for 20 h is used in ASMs. The dissolved oxygen (DO) profile for 11 days was monitored. It was found the mass transfer coefficient KLa is 0.3 h1 during lag and start feed phase and 0.01 h1 during stop feed phase,while the heterotrophic yield coefficient YH is 0.44. Some of the chemical oxygen demand (COD) fractionations of palm oil mill effluent (POME) using respirometric test in ASM models are Ss 50 mg/L, SI 16,600 mg/L, XS 25,550 mg/L, and XI 2,800 mg/L. The comparison of experimental and ASM1 from OUR concentration is found to fit well

Item Type:	Article
Additional Information:	journal homepage: www.elsevier.com/locate/biortech
Uncontrolled Keywords:	Activated sludge models, COD fractionations, Palm oil mill, effluent, Respirometry test
Subjects:	T Technology > TP Chemical technology
Faculty/Division:	Faculty of Chemical & Natural Resources Engineering
Depositing User:	Miss. Ratna Wilis Haryati Mustapa
Date Deposited:	28 Nov 2013 08:15
Last Modified:	09 Jun 2020 02:56
URI:	http://umpir.ump.edu.my/id/eprint/4522
Download Statistic:	View Download Statistics

Actions (login required)

View Item