Influence of Recycled High Density Polyethylene on the Conventional and Morphology Properties of Bitumen

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Wan Mohd Nazmi, Wan Abdul Rahman and Achmad Fauzi, Abdul Wahab (2011) Influence of Recycled High Density Polyethylene on the Conventional and Morphology Properties of Bitumen. Journal of Engineering and Technology, 2 (1). pp. 67-74. ISSN 2180-3811

[img] PDF (fkasa-2011-nazmi-influence of recycled) - Published Version
Restricted to Repository staff only

471Kb

Official URL: http://www.myjurnal.my/public/article-view.php?id=...

Abstract

The aim of this research is to evaluate the effect of recycled High Density Polyethylene (HDPE) pellet in bitumen as an additive in bitumen modification. The concentration of HDPE ranges between 1 to 5% of the weight of a soft (160/220) penetration grade bitumen were used and then compare to intermediate (100/150) penetration grade bitumen. This bitumen modification was prepared by using a high speed mixer at temperatures between 140˚C to 180˚C. The conventional tests such as penetration, softening point and visocosity were conducted to determine the basic characteristics of the HDPE modified and unmodified bitumen. Furthermore, the study on the morphology characteristic of HDPE modified bitumen was evaluated by using fluorescent microscopy to examine the degree of compatibility of the recycled HDPE pellet. The finding indicates that this bitumen modification has the ability to enhance conventional and morphology properties of bitumen. In addition, the plasticity interval and Penetration Index (PI) values of bitumen were also increased. Therefore HDPE modified bitumen can resist the previously mentioned road failures. Finally it could improve the level of performance and the service life of the road. It can be concluded that the application of HDPE modified bitumen gives more advantages compared to the neat bitumen. Having considered the environmental and economical aspects, HDPE modified bitumen is found suitable to be used for road pavements.

Item Type:Article
Subjects:T Technology > TE Highway engineering. Roads and pavements
Divisions:Faculty of Civil Engineering & Earth Resources
ID Code:6378
Deposited By: Mr. Wan Mohd Nazmi Wan Abdul Rahman
Deposited On:25 Aug 2014 10:05
Last Modified:15 Aug 2017 11:10

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my