Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

M. M., Rahman and Khalaf I., Hamada and K., Kadirgama and R. A., Bakar (2012) Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine. Scientific Research and Essay , 7 (8). pp. 891-902. ISSN 1992-2248

[img] PDF - Published Version
Restricted to Repository staff only


Official URL:


The overall heat transfer process within the in-cylinder for port injection hydrogen fueled internal combustion engine (H2ICE) was investigated. One-dimensional gas dynamics was used to describe the flow and heat transfer in the components of the engine model. The engine model was simulated with a variable injection timing, engine speed and equivalence ratio (φ). Simulation was executed for 60 deg ATDC ≤ θinj ≤ 160 deg ATDC (during the intake stroke), 1000 ≤ rpm ≤ 6000 and 0.2 ≤ φ ≤ 1.2. The experimental data were utilized for validation purpose of the adopted numerical model. The baseline engine model with gasoline fuel was verified with experimental data, and reasonable agreement has been achieved. The overall results show that there is a combined influence for the engine speed and equivalence ratio on the overall heat transfer characteristics. The identification for the effect of the injection timing on the overall heat transfer characteristics has been failed because the injection issue is not considered within the combustion approach.

Item Type:Article
Uncontrolled Keywords:Hydrogen fueled engine, cycle analysis, port injection, injection timing, engine speed, heat transfer rate.
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Automotive Engineering Centre
Faculty of Mechanical Engineering
ID Code:6852
Deposited By: Ms Suriati Mohd Adam
Deposited On:13 Jan 2015 10:30
Last Modified:25 Jan 2018 11:14

Repository Staff Only: item control page








An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.

Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to