Experimental determination of convective heat transfer coefficient in wire electro discharge machining

Nadiah Waznah, Zabidi (2008) Experimental determination of convective heat transfer coefficient in wire electro discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

[img]
Preview
Pdf
Experimental determination of convective heat transfer coefficient.pdf

Download (1MB) | Preview

Abstract

Wire electro discharge machining (WEDM) is a fully extended and competitive machining process widely used to produce dies and moulds. However, the risk of wire breakage affects adversely the full potential of WEDM since the overall process efficiency is considerably reduced. These symptoms are especially related to the occurrence of an increase in discharge energy, peak current, as well as increases or decreases in ignition delay time. Because of that, an experimental determination method of the convective heat transfer coefficient in wire electro discharge machining is introduced to prevent the wire breaks during running the machine. Parameters such as peak current and flushing pressure are studied. A special device is developed to measure the average temperature increment of the wire after a period of short circuit discharges, and the thermal load imposed on the wire is also tracked and recorded in advance. Then, based on the thermal model of the wire, the convective coefficient can be calculated accurately. Some tuning experiments are carried out inside and outside a previously cut profile to examine the influence of the kerf on the convective coefficient. With this method, the effect of the coolant flushing pressure on the convective coefficient can be estimated. Based on the results of the analyses, this paper contributes to improve the process performance through a wire breakage.

Item Type: Undergraduates Project Papers
Additional Information: Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2008, SV: MDM MAS AYU BT HASSAN, NO. CD: 3563
Uncontrolled Keywords: Nusselt number; Electric cutting machinery
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TJ Mechanical engineering and machinery
Faculty/Division: Faculty of Mechanical Engineering
Depositing User: Noorul Farina Arifin
Date Deposited: 01 Apr 2010 06:23
Last Modified: 23 Mar 2023 07:14
URI: http://umpir.ump.edu.my/id/eprint/155
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item