UMP Institutional Repository

Preparation and application of polyaluminium silicate chloride in coagulation process

Selvan, Murugan (2010) Preparation and application of polyaluminium silicate chloride in coagulation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

[img]
Preview
PDF (Preparation and application of polyaluminium silicate chloride in coagulation process-Table of contents)
Determination of heavy metal accumulation in Ipomea aquatica using microwave digestion method - Table of contents.pdf - Accepted Version

Download (119kB) | Preview
[img]
Preview
PDF (Preparation and application of polyaluminium silicate chloride in coagulation process-Abstract)
Determination of heavy metal accumulation in Ipomea aquatica using microwave digestion method - Abstract.pdf - Accepted Version

Download (93kB) | Preview
[img]
Preview
PDF (Preparation and application of polyaluminium silicate chloride in coagulation process-Chapter 1)
Determination of heavy metal accumulation in Ipomea aquatica using microwave digestion method - Chapter 1.pdf - Accepted Version

Download (494kB) | Preview
[img]
Preview
PDF (Preparation and application of polyaluminium silicate chloride in coagulation process-References)
Determination of heavy metal accumulation in Ipomea aquatica using microwave digestion method - References.pdf - Accepted Version

Download (104kB) | Preview

Abstract

Coagulation is one of the most important method in chemical treatment of water and wastewater. There are several types of coagulant used in water and wastewater treatment. Most of the inorganic and some polymer coagulants are still not very effective on removing suspended solid and give side effects. A lot of research were done by scientist around the world in coagulation and flocculation field to improve the properties of prepolymerized coagulants, such as polyaluminium chloride (PAC). Recently, Bao-Yu Gao et al.reported that under certain conditions polyaluminum silicate chloride (PASiC), a new type of inorganic polymer coagulant,having a larger particle size and better turbidity removal efficiency than PAC. Coagulation test were done for both water and wastewater PASiC and the results were compared with conventional coagulants (Alum and PAC). For water treatment, PASiC removed 99.45% of turbidity, 68.75% of COD and 48.31% of BOD at optimum coagulant dosage. And for wastewater, it removed 90.14% of turbidity, 89.72% of COD and 46.7%BOD. From this research we can conclude that polyaluminium silicate chloride is very effective in removing suspended solids in both water and wastewater and very good in every aspect compare to other two conventional coagulant, Alum and PAC.

Item Type: Undergraduates Project Papers
Additional Information: Project paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang - 2010, SV: DR.KADHUM MUTTAR SHABEEB, NO CD: 5806
Uncontrolled Keywords: Water Purification Coagulation
Subjects: T Technology > TD Environmental technology. Sanitary engineering
Faculty/Division: Faculty of Chemical & Natural Resources Engineering
Depositing User: Ms. Nurezzatul Akmal Salleh
Date Deposited: 07 Jun 2017 06:23
Last Modified: 07 Jun 2017 06:23
URI: http://umpir.ump.edu.my/id/eprint/17864
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item