UMP Institutional Repository

Study on end brush deburring and sintered diamond ball deburring of micro-features milled

Sai, T. K. and Saptaji, Kushendarsyah and Gebremariam, M.A. and Fatchurrohman, Nanang (2019) Study on end brush deburring and sintered diamond ball deburring of micro-features milled. In: IOP Conference Series: Materials Science and Engineering, International Conference on Recent Advances in Industrial Engineering and Manufacturing, 12-13 December 2018 , Penang, Malaysia. pp. 1-8., 530 (012025). ISSN 1757-899X

[img]
Preview
Pdf
Study on End Brush Deburring and Sintered Diamond Ball.pdf
Available under License Creative Commons Attribution.

Download (1MB) | Preview

Abstract

The presence of top burr in the micro-features produced by milling process can deteriorate and affect the surface quality of the products. Though there are some deburring methods can be used and reported successfully remove the burr in the micro scale features, however simpler and alternative method is still needed. Two of the deburring methods that can be used are end brushing and sintered diamond ball methods. Therefore the aim of this paper is to study the application of the end brush and sintered diamond ball for deburring top burrs exist on micro features produced by milling process. Slot milling experiments were conducted and subsequently deburring process using the two methods was conducted. Micro scale features were also produced using milling process followed by deburring. The deburred results were observed visually using optical microscope and Scanning Electron Microscope (SEM) and average surface roughness was measured. Experimental results show that the end brush and sintered diamond ball deburring have successfully remove the top burrs. The end brush deburring method produced better surface quality compared to the sintered diamond ball.

Item Type: Conference or Workshop Item (Lecture)
Uncontrolled Keywords: Diamond Ball; Micro-features; Study
Subjects: T Technology > TS Manufactures
Faculty/Division: Faculty of Manufacturing Engineering
Depositing User: Pn. Hazlinda Abd Rahman
Date Deposited: 16 Oct 2019 04:25
Last Modified: 16 Oct 2019 04:25
URI: http://umpir.ump.edu.my/id/eprint/24545
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item