UMP Institutional Repository

Prevention of Wrinkling in Shrink Flanging of Ultra-High Strength Steel Sheets Using Gradually Contacting Punch

Zamzuri, Hamedon and Mori, Ken-ichiro and Abe, Yohei and Watanabe, Saharu (2014) Prevention of Wrinkling in Shrink Flanging of Ultra-High Strength Steel Sheets Using Gradually Contacting Punch. Journal of the Japan Society for Technology of Plasticity, 55 (639). pp. 341-345.

[img] PDF
fkp-2014-zamzuri-Prevention_of_wrinkling.pdf
Restricted to Repository staff only

Download (2MB) | Request a copy

Abstract

To prevent the occurrence of wrinkling in the shrink flanging of ultra-high strength steel sheets, a gradually contacting punch was developed. Compressive stress around the convex corner of the sheet in shrink flanging was reduced by gradually bending the edge from the center to the outside of the sheet using the gradually contacting punch. Compressive strain around the convex corner edge decreased as the contact angle of the punch increased. Although a small camber occurred on the upper surface of the flanged sheet using the conventional flat bottom punch, the camber was large using the gradually contacting punch because of the gradual bending. The limiting flange height of the flanged sheet without wrinkling showed an increase of 26% for the 980 MPa grade ultra-high strength steel sheet.

Item Type: Article
Subjects: T Technology > TS Manufactures
Faculty/Division: Faculty of Manufacturing Engineering
Depositing User: Noorul Farina Arifin
Date Deposited: 15 Dec 2014 08:07
Last Modified: 27 Feb 2018 03:06
URI: http://umpir.ump.edu.my/id/eprint/7724
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item