Items where Author is "A. N. M., Rose"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 20.

Article

M. F. F., Ab Rashid and A. N. M., Rose and N. M. Zuki, N. M. and F. R. M., Romlay (2019) Improved moth flame optimization algorithm to optimize cost-oriented two-sided assembly line balancing. Engineering Computations, 37 (2). pp. 638-663. ISSN 0264-4401. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N. M., Rose (2019) A modified artificial bee colony algorithm to optimise integrated assembly sequence planning and assembly line balancing. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5905-5921. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2015) Optimization of Traveling Salesman Problem with Precedence Constraint using Particle Swarm Optimization. Journal of Scienctific Research & Development , 2 (13). pp. 212-216. ISSN 1115-7569. (Published)

A. N. M., Rose and B. M., Deros and M. N. A., Rahman (2014) Critical success factors for implementing lean manufacturing in Malaysian automotive industry. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1191-1200. ISSN 2040-7459. (Published)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) Lean Manufacturing Perceptions and Actual Practice Among Malaysian SME’s in Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 820-829. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. N. M., Rose and B., Md. Deros and M. N., Ab. Rahman (2013) Lean manufacturing perceptions and actual practice among Malaysian SME's in automotive industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (1). pp. 820-829. ISSN 2180-1606. (Published)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) A Study on Lean Manufacturing Implementation in Malaysian Automotive Component Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1467-1476. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Conference or Workshop Item

Dara, Affydah and A. N. M., Rose and M. F. F., Ab Rashid and N. M. Z., Nik Mohamed (2021) Review of lean manufacturing with IR4.0 in automotive industry. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-8., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online)

A. F. H., Fansuri and A. N. M., Rose and M. F. F., Ab. Rashid and N. M. Zuki, N. M. and H., Ahmad (2018) Productivity Improvement Through Line Balancing at Electronic Company - Case Study. In: IOP Conference Series: Materials Science and Engineering, The 3rd International Conference on Manufacturing, Material and Metallurgical Engineering , 17–19 March 2018 , Kuala Lumpur, Malaysia. pp. 1-10., 409 (012015). ISSN 1757-899X

M.N., Ismail and A. N. M., Rose and N. Z., Mohammed and M. F. F., Ab Rashid (2017) Development of six sigma methodology for CNC milling process improvements. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-15., 257 (1). ISSN 17578981

A. F. H. , Fansuri and A. N. M., Rose and N. M. Zuki, N. M. and H., Ahmad (2017) The Challenges of Lean Manufacturing Implementation in Kitting Assembly. In: IOP Conference Series:International Conference of Mechanical Engineering Research (ICMER2017) , 1 - 2 August 2017 , Kuantan, Malaysia. , 257 (012069). ISSN 17578981

Jaffrey, V. and N. M. Zuki, N. M. and A. N. M., Rose (2017) Improvement of productivity in low volume production industry layout by using witness simulation software. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 257. ISSN 17578981

Nurul Husna, Zakaria and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2017) Lean Manufacturing Implementation in Reducing Waste for Electronic Assembly Line. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01048). ISSN 2261-236X

A. N. M., Rose and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad, H. (2017) Similarities of Lean Manufacturing Approaches Implementation in SMEs Towards The Success: Case Study in the Automotive Component Industry. In: MATEC Web of Conferences: The 9th International Unimas Stem Engineering Conference (ENCON 2016) , 26-28 October 2017 , Sarawak, Malaysia. pp. 1-6., 87 (02024). ISSN 2261-236X

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2016) Ergonomics study for workers at food production industry. In: 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute (MAI)Cyberjaya, Selangor. pp. 1-7., 90. ISSN 2261236X

N. H., Zakaria and N. M. Zuki, N. M. and A. N. M., Rose and M. F. F., Ab Rashid (2016) Lean Manufacturing Implementation in Small and Medium Industry. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES2016) , 5-7 September 2016 , York, United Kingdom. . (Unpublished)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2016) Multi-Objective Optimisation of CNC Milling Process for Al 6061 using Modified NSGA-II. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES 2016) , 5-7 September 2016 , York, United Kingdom. pp. 1-8.. (Unpublished)

M. F. F., Ab Rashid and M. M., Razali and Make, M. R. Abdullah and N. M. Zuki, N. M. and A. N. M., Rose (2016) NSGA-II Algorithm for Assembly Line Balancing with Multi-Resource Constraints. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 317-321.. ISBN 978-967-2054-04-7

M. R. M., Rejab and M. M., Rahman and M. M., Noor and A. N. M., Rose (2008) An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis. .

A. N. M., Rose and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2008) Polypropylene Reinforced With Recycle Polyethylene Terephthalate As An Alternative Material For New Plastic Product. In: 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. pp. 1-5..

This list was generated on Thu Mar 28 21:20:12 2024 +08.