Items where Author is "Azri, Alias"

Mohd. Herzwan, Hamzah and Azri, Alias (2022) Heat Generation Inside Turbocharger Without External Heat Source. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (2). pp. 47-59. ISSN 2289-7879. (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. (2021) Effects of lean combustion on bioethanol-gasoline blends using turbocharged spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9140-9148. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd. Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2019) Performance analysis of diesel engine running with tyre-derived fuel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012107). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Herzwan, H. M. and Azri, Alias and R., Mamat (2019) Turbocharging small size engine to increase engine output: an assessment of turbocharger study field. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012089). ISSN 1757-8981 (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. and I. M., Yusri (2019) Evaluation of properties on performance and emission to turbocharged SI engine using fusel oil blend with gasoline. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012113). ISSN 1757-899X (Published)

N., Abdullah and Jaafar, Jamiluddin and Hagos, F. Y. and Azri, Alias and N. S. N., Azmi (2019) Experimental investigation of pineapple leaf fiber as biomass fuel for renewable energy resource. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)

Mohd Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2018) Diesel engine performance operating with tire derived fuel. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. pp. 1-7., 225. ISSN 2261-236X (Published)

Teo, S. H. and Gan, H. L. and Azri, Alias and Gan, Leong Ming (2018) Internally Heated Screw Pyrolysis Reactor (IHSPR) heat transfer performance study. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981 (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2018) Investigation of the pressure ratio and efficiency of a turbocharger centrifugal compressor with a vaned diffuser. World Review of Science, Technology and Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242. (Published)

Azle, Abd Ghalim and Azri, Alias and Azrizulazmi, Bustan and Fadzida, Ismail and Hamdan, Daniyal and Hamzah, Ahmad and Mahfuzah, Mustafa and Mohamad Fadli, Zolkipli and Mohamad Rusydi, Mohamad Yasin and Mohd Azmir, Mohd Azhari and Mohd Fadzil Faisae, Ab Rashid and Mohd Fairusham, Ghazali and Mohd Rusllim, Mohamed and Muhammad Fauzi, Ali and Nasratun, Masngut and Noor Raha, Mohd Radzuan (2018) Quality assurance manual: Academic programme collaboration. Penerbit UMP, Kuantan, Pahang. ISBN 9789672226864

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak and R., Mamat and Abdul Adam, Abdullah (2018) Thermal and Fluid Dynamic Analysis of Compact Fin-and-Tube Heat Exchangers for Automotive Applications. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (05019). ISSN 2261-236X (Published)

M. A. A., Aziz and Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and Mohd Adnin, Hamidi and Azri, Alias and H., Hussin and S., Hamri (2017) Study of alcohol fuel of butanol and ethanol effect on the compression ignition (CI) engine performance, combustion and emission characteristic. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-13., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2017) Application of Taguchi Method in optimization of design darameter for turbocharger vaned diffuser. Industrial Lubrication and Tribology, 69 (3). pp. 409-413. ISSN 0036-8792. (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2017) Application of Taguchi method in optimization of design parameter for turbocharger vaned diffuser. Industrial Lubrication and Tribology, 69 (3). pp. 409-413. ISSN 0036-8792. (Published)

A. Y., Adam and A. N., Oumer and Azri, Alias and M., Ishak and M. M., Noor (2017) Investigation of Thermal-Hydraulic Performance in Flat Tube Heat Exchangers at Various Tube Inclination Angles. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4542-4560. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak (2016) Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangers. In: National Conference for Postgraduate Research (NCON-PGR) , 24-25 September 2016 , Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2016) Characterization and Development of Geldart’s Fluidizing Velocity Profile of Sand Particles for the Application in Fluidized Bed Combustor (FBC). In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 147-156. ISBN 978-981-10-0532-9 (Print); 978-981-10-0534-3 (Online)

Kuwagi, Kenya and Takami, Toshihiro and Azri, Alias and Rong, Degang and Takeda, Hiroshi and Yanase, Shinichiro and Kouchi, Toshinori and Hyakutake, Toru and Yokoyama, Kaoru and Ohara, Yoshiyuki and Takahashi, Nobuo and Sugitsue, Noritake (2016) Development of DEM-CFD Simulation of Combustion Flow in Incinerator with the Representative Particle Model. Journal of Chemical Engineering of Japan, 49 (5). pp. 425-434. ISSN 0021-9592. (Published)

Ahmed Yousif Adam, Mohammed and A. N., Oumer and Azri, Alias and M., Ishak (2016) Effect of Vortex Generator on the Air-Side Thermal-Hydraulic Performance of Flat Tube Heat Exchangers. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 582-590.. (Published)

Afzam, Zulkepli and Hassan, Ibrahim and Azri, Alias and F., Basrawi (2016) Review on the Recent Developments of Photovoltaic Thermal (PV/T) and Proton Exchange Membrane Fuel Cell (PEMFC) Based Hybrid System. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8., 74 (00019). ISSN 2261-236X (Published)

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Ahmad Fitri, Yusop and G., Najafi and Azri, Alias (2015) Effect of Low Proportion Palm Biodiesel Blend on Performance, Combustion and Emission Characteristics of a Diesel Engine. Energy Procedia, 75. pp. 92-98. ISSN 1876-6102 . (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2015) Heat Transfer of Alumina Sands in Fluidized Bed Combustor with Novel Circular Edge Segments Air Distributor. Energy Procedia, 75. pp. 1752-1757. ISSN 1876-6102. (Published)

Cindy, Olin and Hassan, Ibrahim and Azri, Alias and Ahmmad Shukrie, Md Yudin and F., Basrawi (2015) A Study on a Higher Heating Value of Agricultural Waste in Malaysia. In: World Conference on Engineering & Applied Sciences , 30-31 May 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)

Azri, Alias and Kuwagi, Kenya and Kogane, Atsuto and Hirano, Hiroyuki and Takami, Toshihiro (2014) Non-dimensionalization and Three-dimensional Flow Regime Map for Fluidization Analyses. Chemical Engineering Science, 119. pp. 199-211. ISSN 0009-2509. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2014) Characterization and Development of Fluidizing Velocity Profile of Sand Particles in Fluidized Bed Combustor (FBC). In: FB 20 , 11-12 Dec 2014 , Okayama University. . (Unpublished) (Unpublished)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel. Applied Mechanics and Materials, 660. pp. 452-456. ISSN 1662-7482. (Published)

Azri, Alias and Kenya, Kuwagi and Atsuto, Kogane and Hiroyuki, Hirano and Toshihiro, Takami (2014) DEM-CFD Simulations for Various Fluidizations. International Journal of Chemical and Environmental Engineering, 5 (1). pp. 15-17. ISSN 2078-0737. (Published)

Akasyah, M Khathri and R., Mamat and Abdul Adam, Abdullah and Gan, Leong Ming and Azri, Alias (2014) Effect of Compression Ratio on Compression Ignition Engine Performance Operating with Biofuel. In: International Conference On Automotive Innovation and Green Energy Vehicle , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8.. (Published)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) One-Dimensional Simulation of the Combustion Process in an Engine Cylinder with Ethanol. Applied Mechanics and Materials, 660. pp. 447-451. ISSN 1662-7482. (Published)

Azri, Alias (2013) Evaluation of various estimation equations for particle-fluid interaction forces and modeling of heat transfer between particles for dem simulations. PhD thesis, Okayama University of Science (Contributors, UNSPECIFIED: UNSPECIFIED).