Items where Author is "I. M., Yusri"

Article

I. M., Yusri and Anwar, P. P. Abdul Majeed and R., Mamat and M. F., Ghazali and Awad, Omar I. and Azmi, W. H. (2018) A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renewable and Sustainable Energy Reviews, 90. pp. 665-686. ISSN 1364-0321. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Hammid, Ali Thaeer and I. M., Yusri and Mohd Adnin, Hamidi and Humada, Ali Mahmood and Ahmad Fitri, Yusop (2018) Overview of the oxygenated fuels in spark ignition engine: Environmental and performance. Renewable and Sustainable Energy Reviews, 91. pp. 394-408. ISSN 1364-0321. (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri and Ahmad Fitri, Yusop (2018) The impacts of compression ratio on the performance and emissions of ice powered by oxygenated fuels: A review. Journal of the Energy Institute, 91 (1). pp. 19-32. ISSN 1743-9671. (Published)

I. M., Yusri and R., Mamat and G., Najafi and A., Razman and Awad, Omar I. and Azmi, W. H. and W. M. F., Wan Ishak and A. I. M., Shaiful (2017) Alcohol Based Automotive Fuels from First Four Alcohol Family in Compression and Spark Ignition Engine: A Review on Engine Performance and Exhaust Emissions. Renewable and Sustainable Energy Reviews, 77. pp. 169-181. ISSN 1364-0321. (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and Obed M., Ali and A. I. M., Shaiful (2017) Application of Response Surface Methodology in Optimization of Performance and Exhaust Emissions of Secondary butyl alcohol-gasoline Blends in SI Engine. Energy Conversion and Management, 133. pp. 178-195. ISSN 0196-8904. (Published)

Awad, Omar I. and R., Mamat and F., Yusop and M. M., Noor and I. M., Yusri (2017) By-Product Alcohol: Fusel Oil as an Alternative Fuel in Spark Ignition Engine. International Journal of Transport and Vehicle Engineering, 4 (6). p. 267. (Published)

Awad, Omar I. and R., Mamat and Thamir K., Ibrahim and Hagos, F. Y. and M. M., Noor and I. M., Yusri and A. M., Leman (2017) Calorific Value Enhancement of Fusel Oil by Moisture Removal and Its Effect on the Performance and Combustion of a Spark Ignition Engine. Energy Conversion and Management, 137. pp. 86-96. ISSN 0196-8904. (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri and Abdul Adam, Abdullah and Ahmad Fitri, Yusop and M. M., Noor (2017) The Effect of Adding Fusel Oil to Diesel On the Performance and the Emissions Characteristics in a Single Cylinder CI Engine. Journal of the Energy Institute, 90 (3). pp. 382-396. ISSN 1743-9671. (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and F., Yusop and I. M., Yusri (2017) The Impacts of Moisture Content on Performance and Emissions of a Four-Cylinder SI Engine Running with Fusel Oil-Gasoline Blends. WSEAS Transactions on Environment and Development, 13. pp. 120-128. ISSN 1790-5079 (print); 2224-3496 (online). (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and M. F., Othman and S. M., Rosdi (2017) Influences of Gasoline Fuels on Waste Heat Recovery Potentiality of a Spark Ignition Engine. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846(print); 0974-5645(online). (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and Mohd Hafizil, Mat Yasin and Ahmad Fitri, Yusop (2017) Investigation of Influences of Secondary butyl-alcohol Blends on Performance and Cycle-To-Cycle Variations in a Spark Ignition Engines. Energy Procedia, 110. pp. 310-315. ISSN 1876-6102 . (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri (2017) Performance, Combustion Characteristics and Emission Tests of Single Cylinder Engine Running on Fusel Oil - Diesel Blended (F20) Fuel. International Journal of Vehicle Structures & Systems, 9 (3). pp. 195-198. ISSN 0975-3060 (Print); 0975-3540 (Online). (Published)

Awad, Omar I. and R., Mamat and Ali, Obed M. and Azmi, W. H. and K., Kadirgama and I. M., Yusri and A. M., Leman and Yusaf, T. (2017) Response Surface Methodology (RSM) Based Multi-Objective Optimization of Fusel Oil-Gasoline Blends at Different Water Content in SI Engine. Energy Conversion and Management, 150. pp. 222-241. ISSN 0196-8904. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ali, Obed Majeed and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and I. M., Yusri and Rasul, Muhammad (2017) Study of Diesel-biodiesel Fuel Properties and Wavelet Analysis on Cyclic Variations in a Diesel Engine. Energy Procedia, 110. pp. 498-503. ISSN 1876-6102 . (Published)

Awad, Omar I. and Ali, Obed Majeed and R., Mamat and Abdul Adam, Abdullah and G., Najafi and M. K., Kamarulzaman and I. M., Yusri and M. M., Noor (2017) Using Fusel Oil as a Blend in Gasoline to Improve SI Engine Efficiencies: A Comprehensive Review. Renewable and Sustainable Energy Reviews, 69. pp. 1232-1242. ISSN 1364-0321. (Published)

I. M., Yusri and R., Mamat and Obed M., Ali and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and H. M., Mahmudul (2016) The Combustion Of N-Butanol-Diesel Fuel Blends And Its Cycle To Cycle Variability In A Modern Common-Rail Diesel Engine. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2297-2301. ISSN 1819-6608. (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri (2016) Effect of Fuel Oil - Gasoline Fusel Blends on the Performance and Emission Characteristics of Spark Ignition Engine: A Review. Journal of Scienctific Research & Development , 3 (5). pp. 31-36. ISSN 1115-7569. (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and G., Najafi and N. A. C., Sidik and Awad, Omar I. (2016) Experimental Investigation of Combustion, Emissions and Thermal Balance of Secondary butyl alcohol-gasoline Blends in a Spark Ignition Engine. Energy Conversion and Management, 123. pp. 1-14. ISSN 0196-8904. (Published)

R., Mamat and I. M., Yusri and M. K., Akasyah and O. M., Ali (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fuelled with N-Butanol Blends. Jurnal Teknologi (Sciences and Engineering), 77 (8). pp. 69-73. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Conference or Workshop Item

M. K., Akasyah and I. M., Yusri and R., Mamat and M. F., Jamlos and A. P. P., Abdul Majeed (2021) Experimental evaluation of tertiary blends of water in diesel with butyl alcohol using compression ignition engine. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-14., 1092 (012072). ISSN 1757-899X (Published)

Izuan, Izzudin and Ahmad Fitri, Yusop and Syazwana, Sapee and Mohd Adnin, Hamidi and I. M., Yusri and R., Mamat and E., Erdiwansyah (2020) Experimental studies of engine single cylinder run on diesel-biodiesel-butanol blends. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981 (Published)

W. N., Maawa and R., Mamat and I. M., Yusri and Febrina, R. (2019) Effect of emulsified palm oil biodiesel-diesel blends to the combustion characteristics of compression ignition engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012080). ISSN 1757-899X (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. and I. M., Yusri (2019) Evaluation of properties on performance and emission to turbocharged SI engine using fusel oil blend with gasoline. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012113). ISSN 1757-899X (Published)

W. N., Maawa and R., Mamat and I. M., Yusri and Yasar, M. (2019) Experimental Investigation on the Engine Performance and Exhaust Emissions of Emulsified Palm Biodiesel Blends on a Diesel Engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012114). ISSN 1757-899X (Published)

Mahmudul, H. M. and Hagos, F. Y. and R., Mamat and M. M., Noor and I. M., Yusri (2017) Effect of Oxygenate Additive on Diesel Engine Fuel Consumption and Emissions Operating with Biodiesel-Diesel Blend at Idling Conditions. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012084). ISSN 1757-899X (Published)

I. M., Yusri and R., Mamat and A., Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2017) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Injection Spark Ignition Engine. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01036). ISSN 2261-236X (Published)

I. M., Yusri and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2016) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Spark Ignition Engines. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12.. (Unpublished) (Unpublished)

I. M., Yusri and R., Mamat and O. M., Ali and A., Aziz and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and Mahmudul, H. M. and S. M., Rosdi (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fueled with N-butanol Blends. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (012048). ISSN 1757-899X (Published)