Items where Author is "M. S. M., Sani"
 | Up a level |
Article
Muhammad Hatifi, Mansor and M. S. M., Sani and Mohd Firdaus, Hassan (2023) Eigenfrequency shift of piezoelectric backplate in vibro-acoustic energy harvesting. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10850 -10861. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Mutra, R. R. and Reddy, D. M. and Amarnath, M. and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani (2023) Artificial neural network-based fault diagnosis of gearbox using empirical mode decomposition from vibration response. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10695-10709. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M. S. M., Sani and K. M., Jelani and N. A. Z., Abdullah and M. N., Abdul Rani and M. A., Yunus (2023) Finite Element Modelling and Updating of Motorcycle Structure with Suitable Length of Connecting Element. Journal of Acoustics and Vibration Research (JAVR), 1 (1). p. 7689. (Published)
Erdiwansyah, . and Mahidin, . and M. S. M., Sani and Rizalman, Mamat and Asri, Gani and Munawir, . and Susmanto, . (2022) Effect of vibration and noise on spark ignition engines of methanol fuel blended with gasoline. Journal of Scientific & Industrial Research, 81 (1). pp. 32-38. ISSN 0975-1084 (Online). (Published)
Erdiwansyah, . and Mahidin, . and M. S. M., Sani and Rizalman, Mamat and Asri, Gani and Munawir, . and Susmanto, . (2022) Effect of vibration and noise on spark ignition engines of methanol fuel blended with gasoline. Journal of Scientific & Industrial Research, 81. 32 -38. ISSN 0022-4456. (Published)
Abdullah, N. A. Z. and Asri, M. N. A. M. and M. S. M., Sani (2022) Strategies of finite element modeling for spot welded joints and its modal correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9543-9550. ISSN 2180-1606. (Published)
Yunus, M. A. and Abdul Rani, M. N. and Aziz Shah, M. A. S. and M. S. M., Sani and Yahya, Z. (2021) The improvement of bolted joints model via finite element model updating method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8635-8643. ISSN 2231-8380 (online). (Published)
Asri, M. N. A. M. and Abdullah, N.A.Z. and M. S. M., Sani (2021) The effect of modal properties of crash box structures with trigger mechanisms towards the crashworthiness by using finite element analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8459 -8468. ISSN 2231-8380 (online). (Published)
M. S. M., Sani and J. M., Zikri and Abdul Adam, Abdullah (2021) Sound intensity mapping on single cylinder direct injection diesel engine with the application of palm oil methyl ester biodiesel. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8833-8844. ISSN 2180-1606. (Published)
W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Athikary, B. and M. S. M., Sani (2020) Correlating finite element model of a car spot-welded front-end module in the light of modal testing data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7974 -7984. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2020) Computational modal analysis on finite element model of body-in-white structure and its correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7915-7926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh and Nurulakmar, Abu Husain (2020) A review on crashworthiness studies of crash box structure. Thin-Walled Structures, 153 (106795). pp. 1-16. ISSN 0263-8231. (Published)
Nur Farizah Diana, Abdul Razak and M. S. M., Sani and Azmi, W. H. (2020) Heat transfer augmentation in heat exchanger by using nanofluids and vibration excitation - A review. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). pp. 7719-7733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Erdiwansyah, . and Mahidin, . and R., Mamat and M. S. M., Sani and Fitri, Khoerunnisa and Asep, Kadarohman (2019) Target and demand for renewable energy across 10 ASEAN countries by 2040. The Electricity Journal, 32 (10). pp. 1-10. ISSN 1040-6190. (Published)
Erdiwansyah, . and R., Mamat and M. S. M., Sani and Sudhakar, K. (2019) Renewable energy in Southeast Asia: Policies and recommendations. Science of The Total Environment, 670. pp. 1095-1102. ISSN 0048-9697. (Published)
W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Ayub, M. A. and M. S. M., Sani and M. S., Mohd Zin (2019) Frequency based substructuring for structure with double bolted joints : a case study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6188-6199. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma (2019) Experimental investigation of free vibration analysis on fibre metal composite laminates. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5753-5763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
M. A. S., Aziz Shah and M. A., Yunus and M. N., Abdul Rani and A. M., Saman and M. S. M., Sani and M. S., Mohd Zin (2019) The effect of laser stitch welding residual stress on the dynamic behaviour of thin steel structure. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5780-5790. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Erdiwansyah and R., Mamat and M. S. M., Sani and Sudhakar, K. and Asep, Kadarohman and R.E., Sardjono (2019) An overview of Higher alcohol and biodiesel as alternative fuels in engines. Energy Reports, 5. pp. 467-479. ISSN 2352-4847. (Published)
Mohd Sahril, Mohd Fouzi and Khaironi, Mohd Jelani and N. A., Nazri and M. S. M., Sani (2018) Finite element modelling and updating of welded thin-walled beam. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5874-5889. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Siti Norazila, Zahari and M. S. M., Sani (2017) Investigation on impact hammer testing with different types of hammer tip for welded thin plate. Advanced Science Letters, 23 (11). pp. 11325-11329. ISSN 1936-6612. (Published)
Syaiful Azmirul, Mohd Rozlan and Izzuddin, Zaman and Chan, Shiau Wei and Bukhari, Manshoor and M. S. M., Sani and Amir, Khalid (2017) Study of a simply-supported beam with attached multiple vibration absorbers by using finite element analysis. Advanced Science Letters, 23 (5). pp. 3951-3954. ISSN 1936-6612. (Published)
N. A. Z., Abdullah and M. S. M., Sani and Nurul Aina, Husaini and M. M., Rahman and I., Zaman (2017) Dynamics Properties of a Go-Kart Chassis Structure and Its Prediction Improvement Using Model Updating Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3887-3897. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
N. S. M., Noor and Z., Ghazalli and M. R. M., Rejab and F. A., Fauzi and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2017) A Comparison of Muscular Activity among European, Korea and Malaysian During Seating Using Musculoskeletal Computational Analysis Method. Advanced Science Letters, 23 (11). pp. 11471-11474. ISSN 1936-6612. (Published)
N. A. Z., Abdullah and M. S. M., Sani and I., Zaman (2017) Correlation of Structural Modal Properties of Go-Kart Frame Structure using Different Type of Joint in Finite Element Modeling. Advanced Science Letters, 23 (11). pp. 11315-11319. ISSN 1936-6612. (Published)
Siti Norazila, Zahari and M. S. M., Sani and Nurulakmar, Abu Husain and Ishak, M. and Izzuddin, Zaman (2016) Dynamic Analysis of Friction Stir Welding Joints in Dissimilar Material Plate Structure. Jurnal Teknologi (Sciences and Engineering), 78 (6-9). pp. 57-65. ISSN 0127-9696 (print); 2180-3722 (online). (Published)
N. S. M., Noor and Z., Ghazalli and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2016) The enhancement of driver seat comfort for small size car: a preliminary study. Malaysian Journal of Public Health Medicine, 16 (Suppl. 1). pp. 108-114. ISSN 1675-0306. (Published)
Mohamad Zairi, Baharom and Priyandoko, Gigih and F. R. M., Romlay and M. S. M., Sani and M. S., Salleh and M. H. M., Yusof (2015) Voltage Induced Effect for Vibration Suppression Using Eddy Current on Power Steering System. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7482-7487. ISSN 1819-6608. (Published)
Izzuddin, Zaman and Abdurasad, M. R. and Manshoor, B. and Khalid, A. and M. S. M., Sani (2015) Study on Dynamic Behaviour of Grass Trimmer Using Finite Element Analysis. Applied Mechanics and Materials, 786. pp. 383-387. ISSN 1662-7482. (Published)
M. S. M., Sani and Izzuddin, Zaman and M. M., Rahman (2015) Analysis of Split Air Conditioner Noise using Sound Intensity Mapping. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 9 (1). pp. 28-33. ISSN 2289-7879. (Published)
M. S. M., Sani and Muhamad Norhisham, Abdul Rani and Mohd Azmi, Yunus and Ahmad Azlan, Mat Isa and Liyana, Roslan (2015) Force Appropriation Method for Two Degrees of Freedom Nonlinear System. Jurnal Teknologi (Sciences and Engineering), 76 (8). pp. 5-9. ISSN 0127-9696 (print); 2180-3722 (online). (Published)
N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2015) A Review on Model Updating In Structural Dynamics. IOP Conference Series: Materials Science and Engineering, 100 (1). 012015. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
M. S. M., Sani and M. M., Rahman and M. Z., Baharom and I., Zaman (2015) Sound Intensity Mapping of an Engine Dynamometer. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2820-2829. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Application of Multibody Simulation for Fatigue Life Estimation. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 912-923. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Fatigue Life Prediction Using Simplified Endurance Function Model. Advances in Mechanical Engineering, 2013 (581754). pp. 1-12. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)
M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2011) Identification of Dynamics Modal Parameter for Car Chassis. Materials Science and Engineering, 17 (1). ISSN 1757-899X. (Published)
K., Kadirgama and M. M., Rahman and M. M., Noor and M. S. M., Sani (2010) Optimised Tool Life by Partial Swarm Optimisation. International Journal of Material Forming, 3 (1). pp. 479-482. (Published)
K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509. (Published)
M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and J. M., Julie (2009) Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure based on FEA Approach. American Journal of Applied Sciences, 6 (1). pp. 137-142. ISSN 1546-9239. (Published)
M. S. M., Sani and N., Nubra (2008) Application of Dynamics Modal Testing Fun Kart Chassis. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 1-11. ISSN 1985-5176. (Published)
M. S. M., Sani and M. M., Zainudin (2008) Dynamic Measurement System for Interchangeable Shock Absorber Test Rig. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 67-74. ISSN 1985-5176. (Published)
M. M., Rahman and R. A., Bakar and M. M., Noor and M. R. M., Rejab and M. S. M., Sani (2008) Fatigue Life Prediction of Spot-Welded Structures: A Finite Element Analysis Approach. European Journal of Scientific Research, 22 (3). pp. 444-456. ISSN ISSN 1450-216X. (Published)
M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2008) An Investigation into the Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure Based on Fea. Research Journal of Applied Sciences, 3 (1). pp. 10-15. ISSN 1815-932X. (Published)
Bulletin
M. S. M., Sani and M. H. A., Rasid (2014) Experimental Study on Noise Mapping of Split Unit Air Condition System. Auto Inexss, 2014 (8). pp. 15-20. ISSN 1985-8434
M. H. A., Rasid and M. S. M., Sani (2014) Experimental study on noise mapping of split unit air conditioner system. Auto Inexss (8). ISSN 1985-8434
Conference or Workshop Item
J. M., Zikri and M. S. M., Norhakim and M. S. M., Sani (2024) Split air-conditioner noise source identification through sound intensity mapping. In: Journal of Physics: Conference Series; 7th International Conference on Noise, Vibration and Comfort, NVC 2023 , 5 - 7 December 2023 , Kuala Lumpur. pp. 1-9., 2721 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Erdiwansyah, . and M. S. M., Sani and Mahidin, . and M., Zaki and Asep, Kadarohman and Muhibbuddin, . and R. E, Sardjono and Asri, Gani (2021) Experimental investigation on noise and vibrations of biodiesel-butanol blends for diesel engine. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-8., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
N.A.Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2021) Study of modal properties and crashworthiness performance of crash box numerical model with different joining modelling strategies. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-12., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Kadhim, Saleem Khalefa and Ali, Sinan Abdulghafar and Razak, N. F. D. and M. S. M., Sani (2021) Vertical vibrations effect on forced convection heat transfer from a longitudinal finned tube. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-13., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Rina, Febrina and M. S. M., Sani (2020) Estimating rotational FRFs of a complex structure using FE model updating, mode expansion and FRF synthesis method. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology , 29-30 August 2019 , Malahayati University, Lampung, Indonesia. pp. 1-12., 807 (012045). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Abdullah, N. A. Z. and Brapakaran, P. and M. S. M., Sani and Marcel, M. W. and Agung, E. H. (2020) Investigation on the dynamic properties of propeller structure with different number of blades. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology , 29-30 August 2019 , Malahayati University, Lampung, Indonesia. pp. 1-11., 807 (012035). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
M. A. S., Aziz Shah and M. A., Yunus and M. N., Abdul Rani and M. S. M., Sani (2020) The application of non-deterministic model updating method of a complex jointed structure using central composite design based meta-model. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology 2019 , 29-30 August 2019 , Lampung, Indonesia. pp. 1-9., 807 (012036). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
M. S. M., Fouzi and M. S. M., Sani (2020) Finite element modeling and updating for dynamic study of exhaust structure. In: 2nd Regional Conference on Mechanical and Marine Engineering, ReMME 2018 , 7 - 9 November 2018 , Ipoh, Malaysia. pp. 305-313.. ISSN 2195-4356 ISBN 9789811500015 (Published)
N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2019) Comparison of crash behaviour prediction of a car crash box using initial and updated finite element model. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Erdiwansyah, . and M. S. M., Sani and R., Mamat and J. M., Zikri and N. F. D., Razak and Munawir, . (2019) Experimental investigation of vibrations and noise characterization for spark ignition engine. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012014). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Mohamad Syazwan, Mohd Zin and M. N., Abdul Rani and M. A., Yunus and W. I. I., Wan Iskandar Mirza and M. S. M., Sani (2019) Experimental modal analysis procedure for a laser spot welded hat-plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfor , 7 March 2019 , Selangor, Malaysia. pp. 1-9., 1262 (012015). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Rahman, Hammad A. and Khairi, N. D. A. and M. S. M., Sani (2019) Finite element model updating of dissimilar plate with rivet joint. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (012035). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
R. M., Yaacob and M. A. H., Hashim and M. S. M., Sani (2019) Finite element modeling and updating of the composite plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012013). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Mohd Sahril, Mohd Fouzi and M. S. M., Sani and M. F. R., Ishak (2019) Identification dynamic behaviour of disc brake based on finite element model updating approach. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012006). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
M. H. N., Izham and M. S. M., Sani (2019) Model updating of frame structure with bolted joints. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
M. N. A. M., Asri and N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2019) Normal mode finite element analysis of aerofoil wing structure with different materials. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
J. M., Zikri and M. S. M., Sani and Erdiwansyah, . and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester biodiesel as a fuel with the additional of butanol. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 2-11., 1262 (012012). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
N. F. D., Razak and M. S. M., Sani and W. H., Azmi and Zhang, B. (2019) Noise source identification of automotive radiator by using sound intensity mapping method. In: 1st International Colloquium On Noise, Vibration And Comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-12., 1262 (012008). ISSN 17426588 (Published)
J. M., Zikri and M. S. M., Sani and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester with the additional of butanol. In: 1st International Colloquium On Noise, Vibration And Comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (Published)
Anhar, Muhammad P. and Sutikno, S. and M. S. M., Sani (2019) Analysis of bulletproof vest made from fiber carbon composite and hollow glass microsphere (HGM) in absorbing energy due to projectile impact. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012001). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Erdiwansyah, . and Leman, A.M. and Khoerunnisa, F. and Sardjono, R. E. and Munawir, . and Maulana, M. I. and M. S. M., Sani (2019) Engine modelling of a single cylinder diesel engine fuelled by diesel-methanol blend. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-14., 506 (012014). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Balkhaya, . and Anhar, M. P. and Suwarno, . and M. S. M., Sani (2019) Investigation of knife quality by using forging and flame hardening methods. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-6., 506 (012004). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Erdiwansyah and Leman, A. M. and Muhamad Norkhizan, Abdullah and Mulyadi, L. and Fitri, Khoerunnisa and Sardjono, R. E. and Maulana, M. I. and M. S. M., Sani (2019) Performance of a small diesel engine by experimental and numerical simulation analysis. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-12., 506 (012029). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
M. S. M., Sani and M. A. F. A., Rahimi and Danial, Mohamed (2019) Sound intensity mapping of two stroke engine by using hemispherical surface coordinate arrangement. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012060). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani and M. S., Mohd Zin (2019) The prediction of the dynamic behaviour of a structure using model updating and frequency based substructuring. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-7., 506 (012011). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
M. S. M., Sani and M. H. N., Izham and M. N., Abdul Rani and M. A., Yunus (2019) Damage assessment on frame structure with bolted joints based on experimental modal analysis. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-9., 469 (1). ISSN 1757-8981 (Published)
M. S. M., Sani and K. M., Jelani and M. H. M., Razip and N. A., Nazri and Yasar, M. (2019) Dynamics investigation on motorcycle chassis based on Finite Element (FE) modelling and updating. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 Oktober 2018 , UNIVERSITI MALAYSIA PAHANG, PEKAN. pp. 1-10., 469 (1). ISSN 1757-8981 (Published)
M. S. M., Sani and M. S. M., Fouzi and Yusrizal, Muchlis (2019) Finite Element Modelling and updating of welded joint for dynamic study of exhaust structure. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-10., 469 (1). ISSN 17578981 (Published)
M. S. M., Sani and Azmi, W. H. and N. F. D., Razak and Zhang, B. (2019) The effect of change in flowrate on power spectral density (PSD) of automotive radiator system for flow-induced vibration monitoring. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME 2018) , 31 October 2018 , Universiti Malaysia Pahang (UMP)Pekan, Pahang. pp. 1-9., 469 (012101). ISSN 1757-899X (Published)
N. A. Z., Abdullah and M. S. M., Sani and M. S., Salwani (2019) Comparison of crash behaviour of initial and updated finite element model of car crash box in crashworthiness analysis. In: 1st International colloquium on noise, vibration and comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7.. (Unpublished) (Unpublished)
M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma and Wan, Rafizi (2019) Investigation of modal analysis on glass fiber laminate aluminium reinforced polymer: An experimental study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012065). ISSN 1757-899X (Published)
M. S. M., Fouzi and M. S. M., Sani (2019) Numerical study to optimize exhaust hanger location based on finite element modelling and model updating. In: International Conference On Computational Science And Information Management , 21 - 23 March 2019 , Lombok Indonesia. pp. 1-13.. (Unpublished) (Unpublished)
Mohd Syazwan, Mohd Zin and M. N., Abdul Rani and Mohd Azmi, Yunus and M. S. M., Sani and W. I. I., Wan Iskandar Mirza and Ahmad Azlan, Mat Isa (2018) Frequency response function (FRF) based updating of a laser spot welded structure. In: International Conference on Electrical, Electronics, Materials and Applied Science 2017 , 22-23 December 2017 , Swami Vivekananda Institute of Technology (SVIT)Secunderabad, Telangana; India. , 1952. ISSN 0094-243X ISBN 978-073541647-5 (Published)
M. A., Yunus and M. N., Abdul Rani and M. S. M., Sani and M. A. S., Aziz Shah (2018) Finite element model updating of riveted joints of simplified model aircraft structure. In: AIP Conference Proceedings: International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS) , 21-24 December 2017 , Secunderabad, Telangana, Hyderabad, India. p. 1., 1952. ISSN 0094-243X (Published)
N. A., Nazri and M. S. M., Sani and M. N., Abdul Rani and M. A., Yunus (2018) Joining strategy analysis of structural dynamic in top hat plate of dissimilar materials. In: International Conference On Noise, Vibration and Comfort (NVC 2018) , 5-7 March 2018 , Putrajaya Dorset, Putrajaya. pp. 1-9.. (Unpublished) (Unpublished)
N. F. D., Razak and M. S. M., Sani and Azmi, W. H. and Zhang, B. (2017) Noise and vibration analysis for automotive radiator cooling fan. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 Aug. 2017 , Swiss Garden Hotel and Spa, Kuantan, Pahang. pp. 1-9., 257 (1). ISSN 17578981 (Published)
Izzuddin, Zaman and Syaiful Azmirul, Mohd Rozlan and Nor Azali, Azmir and Maznan, Ismon and M. A., Madlan and Musli Nizam, Yahya and Muhd Hafeez, Zainulabidin and M. S. M., Sani and M. F. M., Noh (2017) Modelling of rigid walled enclosure couple to a flexible wall using matlab and ansys APDL. In: Journal of Physics: Conference Series; 1st International Conference on Materials Physics and Mechanics 2017, MPM 2017 , 23 July 2017 , Langkawi. pp. 1-7., 914 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
M. S. M., Sani and N. A., Nazri and D.A.J., Alawi (2017) Vibration analysis of resistance spot welding joint for dissimilar plate structure (mild steel 1010 and stainless steel 304). In: Joining And Welding Symposium (Jws) 2017 , 11 Julai 2017 , UMP Pekan. pp. 1-9., 238 (1). ISSN 17578981 (Published)
N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2017) Correlation of Numerical and Experimental Analysis for Dynamic Behaviour of a body-in-white (BIW) Structure. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01020). ISSN 2261-236X (Published)
Syaiful Azmirul, Mohd Rozlan and Izzuddin, Zaman and Bukhari, Manshoor and Amir, Khalid and Shiau, Wei Chan and M. S. M., Sani (2017) Theoretical Modelling of a Beam with Attached Spring-Mass-Damper System. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01030). ISSN 2261-236X (Published)
Izzuddin, Zaman and Shiau, Wei Chan and M. S. M., Sani (2017) Design analysis of mechanical jack for assembling canopy. In: International Conference on Machine Learning and Soft Computing, ICMLSC 2017 , 13-16 January 2017 , Ho Chi Minh City; Viet Nam. pp. 209-213.. ISBN 978-145034828-7 (Published)
M. S. M., Sani and N. A., Nazri and M. N., Abdul Rani and M. A., Yunus (2017) Dynamic analysis of I cross beam section dissimilar plate joined by TIG welding. In: International Conference On Electrical, Electronics, Materials and Applied Science (ICEEMAS) , 21-24 December 2017 , Secunderabad, Telangana, Hyderabad, India. pp. 1-7.. (Unpublished) (Unpublished)
Siti Norazila, Zahari and M. S. M., Sani and M., Ishak (2017) Finite Element Modelling and Updating of Friction Stir Welding (FSW) Joint for Vibration Analysis. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01021). ISSN 2261-236X (Published)
N. A., Nazri and M. S. M., Sani (2017) Finite Element Normal Mode Analysis of Resistance Welding Jointed of Dissimilar Plate Hat Structure. In: 4th International Conference On Mechanical Engineering Research (ICMER) 2017 , 1-2 August 2017 , Hotel Swiss Graden, Kuantan. pp. 1-9., 257 (1). ISSN 17578981 (Published)
M. H. N., Izham and N. A. Z., Abdullah and Siti Norazila, Zahari and M. S. M., Sani (2017) Structural Dynamic Investigation of Frame Structure with Bolted Joints. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01043). ISSN 2261-236X (Published)
M. S. M., Sani and N. A., Nazri and S. N., Zahari and N. A. Z., Abdullah and G., Priyandoko (2016) Dynamic Study of Bicycle Frame Structure. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-8., 160 (012009). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
M. S. M., Sani and N. A. Z., Abdullah and Siti Norazila, Zahari and Siregar, J. P. and M. M., Rahman (2016) Finite Element Model Updating of Natural Fibre Reinforced Composite Structure in Structural Dynamics. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03007). ISSN 2261-236X (Published)
M. S. M., Sani and H., Ouyang (2016) Identification of Nonlinearities in Joints of a Wing Structure. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03006). ISSN 2261-236X (Published)
Siti Norazila, Zahari and A. A. R, Zakaria and M. S. M., Sani and Izzuddin, Zaman (2016) A Review on Model Updating of Joint Structure for Dynamic Analysis Purpose. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00023). ISSN 2261-236X (Published)
M. S. M., Sani and Siti Norazila, Zahari and N. I. M., Azmi and S., Musa (2016) Secret to Success: Securing Petronas Vendor Development Program (VDP). In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 113-120.. ISBN 978-967-394-255-8 (Published)
M. S. M., Sani and Izzuddin, Zaman and Muhammad, Mohamed Salleh and Maznan, Ismon and Bukhari, Manshoor and Amir, Khalid and Sherif, Araby (2014) Vibration Attenuation of Plate using Multiple Vibration Absorbers. In: Proceedings of the 4th International Conference on Production, Energy and Reliability (ICPER2014) , 3-5 June 2014 , Kuala Lumpur Convention Centre, Kuala Lumpur. pp. 1-6.. (Published)
M. S. M., Sani and Ouyang, H. and Cooper, J.E. and Che Ku Eddy Nizwan, Che Ku Husin (2013) Smart Methodology of Stiffness Nonlinearity Identification Vibration System. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished) (Unpublished)
Zamzuri, Hamedon and M. S. M., Sani (2009) Characterization Of The Response Of Synthetic Bone Substitute To Compressive Load. In: AUN/SEED-Net Regional Conference 2009 , 16 -17 February 2009 , Equatorial Hotel Penang, Malaysia. . (Unpublished) (Unpublished)
K., Kadirgama and M. M., Noor and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Development of Genetic Algorithms and Multilayer Perceptron Neural Network (Mpnn) Model To Study The Student Performance InThermodynamics. In: International Engineering Education Conference , 16-18 May 2009 , Madinah, Kingdom of Saudi Arabia. . (Unpublished) (Unpublished)
M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and R. A., Bakar and T. T., Mon (2009) Development of Statistical Model to Predict Ra and Rz in the Laser Cutting. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)
M. M., Noor and T. T., Mon and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab (2009) Drilling on Fibre-Glass Composite using CO2 Laser. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished) (Unpublished)
M. R. M., Rejab and M. M., Noor and R., Daud and K., Kadirgama and M. S. M., Sani (2009) Effect of Adverse Environment on Buckling of Composite Laminates. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)
M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and M. M., Rahman and T. T., Mon (2009) The Effect of End Milling Parameters on Surface Roughness when Machining Corrosion Resistance Alloy. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished) (Unpublished)
K., Kadirgama and M. M., Noor and M. S. M., Sani and R. A., Bakar and A., Ibrahim (2009) The Effect of the Foundation Subject to the Final Year Subject. In: International Journal Conference in Recent Trends in Mechanical Engineering (IJCRTME09) , 24-26 Apr 2009 , Trivandrum, Kerala, India.. . (Unpublished) (Unpublished)
M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and M. Y., Taib (2009) The Entry Qualifications and Gender Analysis of Student Performance by using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished) (Unpublished)
M. S. M., Sani and M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Exit Surveys Assessment of Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)
M. S. M., Sani and M. M., Noor and M. H. A., Rasid and M. R. M., Rejab and K., Kadirgama and M. M., Rahman (2009) Experimental Study On Noise Source Identification Of Split Unit Air Conditioner System. In: International Conference on Advance Mechanical Engineering (ICAME09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished) (Unpublished)
M. R. M., Rejab and M. M., Noor and K., Kadirgama and M. M., Rahman and Z., Ahmad@Manap and M. S. M., Sani and R., Daud (2009) An Investigation of Profiles for Plate Cams with Vertical In-line Roller Followers. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)
M. S. M., Sani and M. M., Noor and M. S. M., Zainury and K., Kadirgama and M. R. M., Rejab and M. M., Rahman (2009) Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)
M. R. M., Rejab and M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2009) Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angles. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)
M. Y., Taib and K., Kadirgama and M. M., Noor and M. S. M., Sani (2009) Performance Analysis of a Domestic Refrigerator in Malaysia using Experimental Method. In: Proceeding of International Conference on Recent and Emerging Advanced Technologies in Engineering (iCREATE 2009) , 23-24 November 2009 , Kuala Lumpur. . (Unpublished) (Unpublished)
K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2009) Prediction Modelling Of Power And Torque In End-Milling. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished) (Unpublished)
M. S. M., Sani and Azlyna, Senawi (2009) Quantitative Assessment Of Bachelor Mechanical Engineering Programs By Senior Exit Surveys At Universiti Malaysia Pahang. In: International Engineering Education Conference , 16-19 May , Madinah, Kingdom of Saudi Arabia. . (Unpublished) (Unpublished)
M. S. M., Sani and M. M., Noor and T. T., Mon (2009) Stress Analysis And Modal Transient Response Of Car Chassis. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished) (Unpublished)
M. M., Noor and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Student Performance Analysis Using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Published)
K., Kadirgama and M. M., Noor and M. M., Rahman and M. S. M., Sani (2009) Surface Roughness Analysis In End Milling With Response Ant Colony Optimization. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia. . (Unpublished) (Unpublished)
M. M., Noor and K., Kadirgama and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Tool Life Analysis By Partial Swarm Optimisation. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia.. . (Unpublished) (Unpublished)
M. S. M., Sani and M. M., Noor and M. R. M., Rejab and A. S., Sulaiman (2008) Assessment of The Mechanical Engineering Programs by Exit Surveys at Universiti Malaysia Pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished) (Unpublished)
M. M., Noor and K., Kadirgama and D., Ramasamy and M. S. M., Sani (2008) CFD Simulation And Validation Of The In-Cylinder Within A Motored Two Stroke Si Engine. In: International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished) (Unpublished)
K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. and M. S. M., Sani (2008) Design A New Household Recycle Trash Bin. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished) (Unpublished)
M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani (2008) Development of Auto Car Jack Using Internal Car Power. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished) (Unpublished)
M. S. M., Sani and M. M., Rahman and M. M., Noor and K., Kadirgama and G. L., Ming (2008) Dynamic Correlation Technique and Model Updating on Go Kart Chassis Structure. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , December 18 -19, 2008 , Kuching, Sarawak.. . (Unpublished) (Unpublished)
M. S. M., Sani and M. M., Rahman and Zamzuri, Hamedon and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) An Evaluation of Profiles for Disk Cams with In-line Roller Followers. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished) (Unpublished)
M. S. M., Sani and Che Ku Eddy Nizwan, Che Ku Husin and M. M., Noor (2008) Experimental Heat Transfer Study On The Shock Absorber Operation. In: International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished) (Unpublished)
M. M., Rahman and R. A., Bakar and M. S. M., Sani and M. M., Noor (2008) Investigation Into Surface Treatment On Fatigue Life For Cylinder Block Of Linear Engine Using Frequency Response Approach. In: 15th International Congress on Sound and Vibration (ICSV 15) , 6-10 July 2008 , Daejeon, Korea. . (Unpublished) (Unpublished)
M. R. M., Rejab and K., Kadirgama and M. M., Noor and M. S. M., Sani (2008) Modification And Testing Of Four Axes Filament Winding Machine. In: Proceeding of International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 December 2008 , UiTM, Penang. . (Published)
M. M., Noor and A., Sulaiman and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and F. R. M., Romlay and R., Daud and Z., Ghazalli and D., Ramasamy and M. F., Ghazali and W. S., Wan Harun and M. Y., Taib (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of EnCon2008: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , 18-19mDecember 2008 , Kuching, Sarawak, Malaysia. pp. 1-6.. (Published)
M. M., Rahman and M. M., Noor and M. R. M., Rejab and M. S. M., Sani and K., Kadirgama (2008) Study Of Air Fuel Ratio On Engine Performance Of Direct Injection Hydrogen Fueled Engine. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Published)
M. S. M., Sani and M. M., Rahman and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) Study on Dynamic Characteristics of Automotive Shock Absorber System. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Malaysia . . (Unpublished) (Unpublished)
M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and M. R. M., Rejab (2007) Fatigue Analysis of Spot-Welded Joints using Finite Element Analysis Approach. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. . (Unpublished) (Unpublished)
F. R. M., Romlay and M. S. M., Sani (2006) Model Modification Of Wira Center Member Bar. In: Regional Conference in Vehicle Engineering & Technology (Rivet 2006) , 3-5 July 2006 , Kuala Lumpur, Malaysia. . (Unpublished) (Unpublished)