Items where Author is "Mahendran, Samykano"

Article

Yadav, Aman and Mahendran, Samykano and Pandey, Adarsh Kumar and Natarajan, Sendhil Kumar and Vasudevan, Gopi and Muthuvairavan, Guna and Suraparaju, Subbarama Kousik (2024) Sustainable phase change material developments for thermally comfortable smart buildings: A critical review. Process Safety And Environmental Protection, 191 (Part B). pp. 1918-1955. ISSN 0957-5820. (Published)

Natarajan, Sendhil Kumar and Suraparaju, Subbarama Kousik and Muthuvairavan, Guna and Elangovan, E. and Mahendran, Samykano (2024) Experimental analysis and development of novel drying kinetics model for drying grapes in a double slope solar dryer. Renewable Energy, 236 (121508). pp. 1-9. ISSN 0960-1481. (Published)

Suraparaju, Subbarama Kousik and Peddojula, Mohana Krishna and Mahendran, Samykano and El-Sebaey, Mahmoud S. and Kadambari, CS Vyasa Krishnaji and Budala, Swapna Babu and Manepalli, TN VV Ramkumar and Reddy, Lavanya and Vardhanapu, Sanjay Raju and Ajjada, Bhogeswara Rao and Pilli, Ramesh Babu (2024) Enhancing the productivity of pyramid solar still utilizing repurposed finishing pads as cost-effective porous material. Desalination and Water Treatment, 320 (100733). pp. 1-10. ISSN 1944-3986. (Published)

Suraparaju, Subbarama Kousik and Mahendran, Samykano and Natarajan, Sendhil Kumar and Rajamony, Reji Kumar and Pandey, Adarsh Kumar (2024) Waste-derived thermal storage solutions for sustainable solar desalination using discarded engine oil and paraffin wax: A techno-environmental feasibility evaluation. Desalination, 576 (117318). pp. 1-19. ISSN 0011-9164. (Published)

Yadav, Aman and Pandey, A. K. and Mahendran, Samykano and Kareri, Tareq and Tyagi, V. V. (2024) Wheat husk derived microparticle infused organic phase change material for efficient heat transfer and sustainable thermal energy storage. Journal of Energy Storage, 86 (111204). pp. 1-19. ISSN 2352-152X. (Published)

Yadav, Aman and Mahendran, Samykano and Pandey, A. K. and Kareri, Tareq and Kalidasan, B. (2024) Optimizing thermal properties and heat transfer in 3D biochar-embedded organic phase change materials for thermal energy storage. Materials Today Communications, 38 (108114). pp. 1-17. ISSN 2352-4928. (Published)

Parvez, Md. Shohan and Rahman, Md Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Surface morphology and thermogravimetric analysis of polyaniline (PANI) incorporated cotton fabric. Energy Engineering, 121 (1). pp. 1-12. ISSN 0199-8595. (Published)

Parvez, M. S. and Rahman, Md Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Current advances in fabric-based airbag material selection, design and challenges for adoption in futuristic automobile applications. Materials Today: Proceedings. p. 123. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Rajamony, R. K. and Mahendran, Samykano and Pandey, A. K. and Babu, S. Ramesh and Noor, M. M. and Devarajan, R. and Paw, J. K. Siaw and Natarajan, S. K. (2023) Investigation on thermophysical properties of multi-walled carbon nanotubes enhanced salt hydrate phase change material. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10595-10605. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Yadav, A. and Mahendran, Samykano and Pandey, A. K. and Tyagi, V. V. and Devarajan, R. and Sudhakar, K. and Noor, M. M. (2023) A systematic review on bio-based phase change materials. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (2). pp. 10547-10558. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sofiah, A. G. N. and Mahendran, Samykano and Sudhakar, K. and Said, Zafar and Pandey, A. K. (2023) Copper oxide/polyaniline nanocomposites-blended in palm oil hybrid nanofluid: Thermophysical behavior evaluation. Journal of Molecular Liquids, 375 (121303). pp. 1-16. ISSN 0167-7322. (Published)

Paul, John and Mahendran, Samykano and Pandey, Adarsh Kumar and K., Kadirgama and Tyagi, V. V. (2023) Nano engineered paraffin-based phase change material for building thermal management. Buildings, 13 (4). pp. 1-6. ISSN 2075-5309. (Published)

Rajan, Kumaresan and Mahendran, Samykano and Kumaran, Kadirgama and Adarsh, Kumar Pandey and Md Mustafizur, Rahman (2023) Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Parvez, Md. Shohan and Rahman, Md. Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Electrochemical characterization and joule heating performance of polyaniline incorporated cotton fabric. Physics and Chemistry of the Earth, Parts A/B/C, 129. pp. 1-7. ISSN 1474-7065. (Published)

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and Ali, M. Y. (2023) Exploring surfactant-enhanced stability and thermophysical characteristics of water-ethylene glycol-based Al2O3-TiO2 hybrid nanofluids. WSEAS Transactions on Heat and Mass Transfer, 18. 195 -206. ISSN 2224-3461. (Published)

Kumaresan, Rajan and Mahendran, Samykano and Kumaran, Kadirgama and Wan Sharuzi, Wan Harun and Rahman, Md. Mustafizur (2022) Fused deposition modeling: process, materials, parameters, properties, and applications. The International Journal of Advanced Manufacturing Technology, 120. pp. 1531-1570. ISSN 1433-3015 (Online); 0268-3768 (Printed). (Published)

John Paul, Nadakkal and K., Kadirgama and Mahendran, Samykano and Saidur, R. and Pandey, A. K. and Mohan, R. V. (2022) An updated review on low-temperature nanocomposites with a special focus on thermal management in buildings. Energy Engineering, 119 (4). 1299 -1325. ISSN 0199-8595. (Published)

Aravinda, Kottasamy and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. K., Pandey (2021) Optimization of impact properties of Copper-Polylactic Acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 78-90. ISSN 2289 - 7879. (Published)

Kananathan, J. and Mahendran, Samykano and K., Kadirgama and Ramasamy, D. and Rahman, M. M (2021) Statistical model for impact and energy absorption of 3D printed coconut Wood-PLA. Energy Engineering, 118 (5). pp. 1305-1315. ISSN 0199-8595. (Published)

Kumar, Nallapaneni Manoj and Mahendran, Samykano and Karthick, A. (2021) Energy loss analysis of a large scale BIPV system for university buildings in tropical weather conditions: a partial and cumulative performance ratio approach. Case Studies in Thermal Engineering, 25 (100916). pp. 1-14. ISSN 2214-157X. (Published)

Rajan, Kumaresan and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and Ngui, Wai Keng and Adarsh Kumar, Pandey (2021) 3D printing technology for thermal application: a brief review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 84-97. ISSN 2289-7879. (Published)

Imtiaz, Ali Laghari and Reji Kumar, Rajamony and Pandey, A. K. and Mahendran, Samykano and Chopra, Kapil and Abusorrah, Abdullah M. and Sharma, Kamal and Tyagi, V. V. (2021) Energy, exergy, exergoeconomic and enviroeconomic (4-E) assessment of solar water heater with/without phase change material for building and other applications: a comprehensive review. Sustainable Energy Technologies and Assessments, 45. pp. 1-21. ISSN 2213-1388. (Published)

Arvind, Kottasamy and Mahendran, Samykano and Kumaran, Kadirgama and Rahma, Mustafizur and Muhamad, Mat Noor (2021) Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique. Journal of Advanced Manufacturing Technology, 119. pp. 5211-5232. ISSN 2289-8107. (Published)

I, Samylingam and Aslfattahi, Navid and K., Kadirgama and Mahendran, Samykano and L., Samylingam and R., Saidur (2021) Improved Thermophysical Properties of Developed Ternary Nitrate-Based Phase Change Material Incorporated with MXene as Novel Nanocomposites. Energy Engineering, 118 (5). pp. 1253-1265. ISSN 0199-8595. (Published)

Reji Kumar, Rajamony and Mahendran, Samykano and Pandey, A. K. and Kalidasan, B and Imtiaz, Ali Laghari and Kothari, Richa and Abusorrah, Abdullah M. and Sharma, Kamal and Tyagi, V. V. (2021) Utilization of solar energy for wastewater treatment: challenges and progressive research trends. Journal of Environmental Management, 297. pp. 1-23. ISSN 0301-4797. (Published)

Nurhanis Sofiah, Abd Ghafar and Mahendran, Samykano and S., Shahabuddin and K., Kadirgama and A. K., Pandey (2021) An experimental study on characterization and properties of eco‑friendly nanolubricant containing polyaniline (PANI) nanotubes blended in RBD palm olein oil. Journal of Thermal Analysis and Calorimetry. pp. 1-15. ISSN 1388-6150 (print); 1588-2926 (online). (In Press / Online First) (In Press / Online First)

Reji Kumar, Rajamony and Mahendran, Samykano and Kumaran, Kadirgama and Pandey, Adarsh Kumar and Tyagi, V. V. (2020) Phase change materials and nano-enhanced phase change materials for thermal energy storage in photovoltaic thermal systems: a futuristic approach and its technical challenges. Renewable and Sustainable Energy Reviews, 133. pp. 1-34. ISSN 1364-0321. (Published)

Sakinah, Hisham and K., Kadirgama and Mohammed, Hussein A. and Kumar, Amit and D., Ramasamy and Mahendran, Samykano and Rahman, Saidur (2020) Hybrid nanocellulose-copper (II) oxide as engine oil additives for tribological behavior improvement. Molecules, 25 (13). pp. 1-16. ISSN 1420-3049 (print); 1420-3049 (online). (Published)

Benedict, F. and Kumar, Amit and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and Mahendran, Samykano and Saidur, R. (2020) Thermal performance of hybrid-inspired coolant for radiator application. Nanomaterials, 10 (6). pp. 1-34. ISSN 2079-4991. (Published)

Shah, Syed Nadeem Abbas and Shahabuddin, Syed and Mohd Faizul, Mohd Sabri and Mohd Faiz, Mohd Salleh and Mohamad Azlin, Ali and Hayat, Nasir and Nor Azwadi, Che Sidik and Mahendran, Samykano and Saidur, R. (2020) Experimental investigation on stability, thermal conductivity and rheological properties of rGO/ethylene glycol based nanofluids. International Journal of Heat and Mass Transfer, 150 (118981). pp. 1-20. ISSN 0017-9310. (Published)

B., Kalidasan and Pandey, A. K. and Syed, Shahabuddin and Mahendran, Samykano and M., Thirugnanasambandam and Saidur, R. (2020) Phase change materials integrated solar thermal energy systems: Global trends and current practices in experimental approaches. Journal of Energy Storage, 27 (101118). pp. 1-34. ISSN 2352-152X. (Published)

Imtiaz, Ali Laghari and Mahendran, Samykano and Pandey, A. K. and K., Kadirgama and Tyagi, V. V. (2020) Advancements in PV-thermal systems with and without phase change materials as a sustainable energy solution: energy, exergy and exergoeconomic (3E) analytic approach. Sustainable Energy & Fuels, 4 (10). pp. 4956-4987. ISSN 23984902. (Published)

Sakinah, Muhammad Hisham and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and R., Saidur (2020) Enhancement of Tribological Behaviour and Thermal Properties of Hybrid Nanocellulose/Copper (II) Oxide Nanolubricant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 47-54. ISSN 2289-7879. (Published)

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat and Mahendran, Samykano and G., Najafi (2019) Performance improvement in mobile air conditioning system using Al2O3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1299-1310. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Manoj Kumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano (2019) Performance comparison of BAPV and BIPV systems with c-Si, CIS and CdTe photovoltaic technologies under tropical weather conditions. Case Studies in Thermal Engineering, 13. pp. 1-10. ISSN 2214-157X. (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Mahendran, Samykano and G., Najafi and Nor Azwadi, Che Sidik (2019) An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130. pp. 1163-1169. ISSN 0017-9310. (Published)

K., Kadirgama and W. S., Wan Harun and Tarlochan, F. and Mahendran, Samykano and D., Ramasamy and Mohd Zaidi, Azir and Mehboob, H. (2018) Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material. The International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 495-510. ISSN 0268-3768. (Published)

Ramachandran, K. and K., Kadirgama and Awad, Omar I. and D., Ramasamy and Mahendran, Samykano and Azmi, W. H. (2018) Comprehensive review of principle factors for thermal conductivity and dynamic viscosity enhancement in thermal transport applications: An analytical tool approach. International Communications in Heat and Mass Transfer, 98. pp. 13-21. ISSN 0735-1933. (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano and Sukumaran, Sreenath (2018) Dust cleaning robots (DCR) for BIPV and BAPV solar power plants-A conceptual framework and research challenges. Procedia Computer Science, 133. pp. 746-754. ISSN 1877-0509. (Published)

B., Sangmesh and K., Gopalakrishna and S. H., Manjunath and N., Kathyayini and K., Kadirgama and Mahendran, Samykano and Vijayakumar, G. C. (2018) Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3852-3865. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. M. M., Zawawi and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Mahendran, Samykano (2018) Experimental investigation on thermo-physical properties of metal oxide composite nanolubricants. International Journal of Refrigeration, 89. pp. 11-21. ISSN 0140-7007. (Published)

Sofiah, A. G. N. and Mahendran, Samykano and K., Kadirgama and Mohan, R. V. and Nurul Akmal, Che Lah (2018) Metallic nanowires: Mechanical properties - Theory and experiment. Applied Materials Today, 11. pp. 320-337. ISSN 23529407. (Published)

ManojKumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano and Jayaseelan, V. (2018) On the technologies empowering drones for intelligent monitoring of solar photovoltaic power plants. Procedia Computer Science, 133. pp. 585-593. ISSN 1877-0509. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and A. F., Ismail and K., Kadirgama and Mahendran, Samykano and G., Najafi and Nur Izwanne, Mahyon (2018) PI/NCC-Based Tubular Carbon Membrane: Influence of Aging Times Towards Oxygen Separation Performance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51 (2). pp. 187-196. ISSN 2289-7879. (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano (2018) Performance of thin-film BIPV as double sloped pitched roof in buildings of Malaysia. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40 (20). pp. 2476-2484. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Sudhakar, K. and R., Mamat and Mahendran, Samykano and Azmi, W. H. and W. F. W., Ishak and Yusaf, Talal (2018) An overview of marine macroalgae as bioresource. Renewable and Sustainable Energy Reviews, 91. pp. 165-179. ISSN 1364-0321. (Published)

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mahendran, Samykano and Nurul Akmal, Che Lah and S. A., Che Ghani and F., Tarlochan and M. R., Raza (2017) Corrosion and Surface Modification on Biocompatible Metals: A Review. Materials Science and Engineering: C, 77. pp. 1261-1274. ISSN 0928-4931. (Published)

Nurhanis Sofiah, Abd Ghafar and Mahendran, Samykano and Murillo, J. Rivas and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2017) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamic simulations. Advanced Science Letters, 23 (11). pp. 11549-11552. ISSN 1936-6612. (Published)

Nurul Akmal, Che Lah and Mahendran, Samykano and Mohd Rafie, Johan and Nuurul Syahierah, Othman and Mohd Mawardi, Saari and Fen, Leo Bey and Nur Zalikha, Khalil (2017) Plasmonic Behaviour of Phenylenediamine Functionalised Silver Nanoparticles. Materials Research Express, 4 (9). pp. 1-14. ISSN 2053-1591. (Published)

D., Ramasamy and Mahendran, Samykano and Z. A. A., Karim and Nagarajan, T. (2011) Design of valveless micropump using preliminary characteristics from fluid flow. Journal of Applied Sciences, 11 (11). pp. 2072-2075. ISSN 1812-5654. (Published)

Book Chapter

Nurul Akmal, Che Lah and Mohd N. M., Zubir and Mahendran, Samykano (2018) Engineered nanomaterial in electronics and electrical industries. In: Handbook of Nanomaterials for Industrial Applications. Micro and Nano Technologies, 1 (1). Elsevier, pp. 324-364. ISBN 9780128133514

Conference or Workshop Item

Kumaresen, Mohanaravi and Mahendran, Samykano and Satesh, Namasivayam and K., Kadirgama and Noor, M. M. and Subbarama, Kousik Suraparaju (2024) Design and development of a biomimetic solar tree for sustainable cogeneration : An energy and exergy assessment. In: E3S Web of Conferences; 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-17., 488 (02002). ISSN 2555-0403 (Published)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and N. W., Awang and Mohd Kamal, Kamaruzzaman (2023) Prediction and Optimization of Thermophysical Properties of Hybrid Cellulose Nanocrystal-Copper (II) Oxide Nanolubricant for Tribology Application. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 325-340.. ISBN 978-981-19-4425-3 (Published)

Farhana, Kaniz and K., Kadirgama and Mohamed, Danial and Mahamude, Abu Shadate Faisal and Subramonian, Sivarao and D., Ramasamy and Mahendran, Samykano (2023) An experimental evaluation of specific heat of mono and hybrid nanofluids. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 215-223.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Ng, X. H. and R. A., Bakar and Kadirgama, Kumaran and Sivaraos, . and D., Ramasamy and Mahendran, Samykano (2023) The performance of beta type stirling engine using different fuel. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 89-110.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Parvez, M. S. and Rahman, M. M. and Mahendran, Samykano and Ali, M. Y. (2022) Morphological analysis of Polyaniline (PANI) integrated cotton fabric. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 113-117.. ISBN 978-1-83953-782-0 (Published)

Devarajan, Ramasamy and Sandhya, Madderla and Kumaran, Kadirgama and Mahendran, Samykano and Sudhakar, Kumarasamy and Md. Mustafizur, Rahman and Wan Sharuzi, Wan Harun (2021) High heat transfer using hybrid engine coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Rahim, Nasrudin Abd and Selvaraj, Jeyraj and Mahendran, Samykano and Tyagi, Vineet Veer and Saidur, Rahman (2021) Investigation on thermophysical properties of metallic oxide nanoparticle dispersed in fatty acid. In: Materials Today: Proceedings; 3rd International Conference on Advances in Mechanical Engineering and Nanotechnology, ICAMEN 2021 , 18-19 March 2021 , Jaipur. pp. 2864-2868., 47 (11). ISSN 2214-7853 (Published)

Kadirgama, Kumaran and Chelian, Ilen and Rahman, Md Mustafizur and Devarajan, Ramasamy and Mahendran, Samykano and Samylingam, Lingenthiran and Rahman, Saidur (2021) Mxene enrich concentration solar power (CSP) coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

D., Ramasamy and K., Mohanesen and R., Maria and Mahendran, Samykano and K., Kadirgama and M. M., Rahman (2020) Analysis of alumina particles size and shape formation from developed planetary ball mill. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052032). ISSN 1757-899X (Published)

K., Kadirgama and D., Ramasamy and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Analysis of thermal Conductivity for Cellulose Nanocrystal (CNC) based nanofluid. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-4.. (Unpublished) (Unpublished)

Santhi, U. and W. K., Ngui and Mahendran, Samykano and K., Sudhakar and K., Kadirgama and A. G. N., Sofiah (2019) Cobalt nanowires: advancing into future nanomaterial. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020006). ISBN 978-0-7354-1787-8 (Published)

F., Benedict and K., Kadirgama and D., Ramasamy and M. M., Noor and Mahendran, Samykano and M. M., Rahman and Zakri, Ghazalli and Sagmesh, B. (2019) Nanocellulose as heat transfer liquid in heat exchanger. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-9., 2059 (020044). ISBN 978-0-7354-1787-8 (Published)

D., Ramasamy and K., Kadirgama and W. H., Azmi and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Prediction modelling for Cellulose Nanocrystal (CNC) dispersed in ethylene glycol- water mixture. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-2.. (Unpublished) (Unpublished)

Subramaniam, Shathiswara Rao and Mahendran, Samykano and Selvamani, Sathish Kumar and W. K., Ngui and K., Kadirgama and Sudhakar, K. and M. S., Idris (2019) Preliminary Investigations of Polylactic Acid (PLA) Properties. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020038). ISBN 978-0-7354-1787-8 (Published)

K., Chopra and Pratik, Kumar Pathak and Mahendran, Samykano and Tyagi, V. V. and Pandey, A. K. (2019) Recent advancements in design of flat plate solar collectors. In: The International Scientific Forum (ISF2019) , 16-17 December 2019 , Melaka, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)

K., Kadirgama and Kaaliarasan, Ramachandran and D., Ramasamy and W. H., Azmi and Mahendran, Samykano (2018) Elucidation and model development of thermal conductivity analysis for cellulose nanocrystal (CNC) based nanofluid. In: 26th Annual international conference on composites or nano engineering , 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished) (Unpublished)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano (2018) Estimation of solar collector area for water heating in buildings of Malaysia. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES2018) , 01-02 March 2018 , Perpustakaan UMP Pekan, Universiti Malaysia Pahang. p. 1., 342 (1). ISSN 17578981 (Unpublished) (Unpublished)

D., Ramasamy and M. M., Rahman and K., Kadirgama and M. M., Noor and Azmi, W. H. and Mahendran, Samykano and W. S., Wan Harun (2018) Green engine coolant (GEC): cellulose nanocrystals as engine coolant process. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted) (Submitted)

Mahendran, Samykano and R. V., Mohana Sundram and K., Sudhakar and S. G., Ponnabalam (2018) Nickel nanowire: magnetic ordering synthesis. In: International Conference on Advanced Nano Materials (ANM, 2018) , 18 - 20 July 2018 , University of Aveiro, Portugal. p. 1.. (Unpublished) (Unpublished)

Sudhakar, K. and Mahendran, Samykano and Ria, - (2018) Performance of utility scale PV Plant in Malaysia and India: a comparative study. In: 4th International Conference on Electrical Energy Systems (ICEES) 2018 , 7-9 Feb 2018 , Chennai, India. pp. 106-110.. (Published)

Nazatul Sharreena, Suhaimi and Mohd Mawardi, Saari and Amir Izzani, Mohamed and Nurul Akmal, Che Lah and Mahendran, Samykano (2017) Development of A Compact and Sensitive AC Magnetometer for Evaluation Of Magnetic Nanoparticles Solution. In: IEEE 8th Control and System Graduate Research Colloquium (ICSGRC 2017) , 4-5 August 2017 , Shah Alam, Malaysia. pp. 221-224.. ISBN 978-1-5386-0380-2 (Published)

M. H. M., Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Mahendran, Samykano and E. H., Agung and Cionita, Tezara and Jamiluddin, Jaafar (2017) Effect of alkaline treatment on mechanical properties of woven ramie reinforced thermoset composite. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-6., 257 (1). ISSN 1757-8981 (Published)

D., Ramasamy and Kaaliarasan, Ramachandran and G., Kadirgama and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Experimental investigation and empirical model development of thermal conductivity for cellulose nanocrystal (CNC) based nanofluid. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-4.. (Unpublished) (Unpublished)

J., Kananathan and Sofiah, A. G. N. and Mahendran, Samykano and S., Ulakanathan and Nurul Akmal, Che Lah and W. S., Wan Harun and K., Sudhakar and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of Boric Acid (H3BO3) Concentration on the Physical Properties of Electrochemical Deposited Nickel (Ni) Nanowires. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012033). ISSN 1757-899X (Published)

D., Ramasamy and Kaaliarasan, Ramachandran and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Investigation of Dynamic Viscosity Through Experiment and Correlation Determination through Response Surface Methodology for Cellulose Nanocrystal (Cnc) Dispersed in Ethylene Glycol-Water Mixture. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-3.. (Unpublished) (Unpublished)

Aravinda, Kottasamy and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and M. M., Noor and M. M., Rahman (2016) Aluminium Oxide (AL2O3) Nanoparticles with Long Life Coolant for Car Radiator Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished) (Unpublished)

Mahendran, Samykano and Lee, Giok Chui and Shahrani, Anuar and R. A., Bakar and K., Kadirgama and Amir, Abdul Razak and Sharma, K. V. (2013) Diurnal Pattern and Estimation of Global Solar Radiation in East Coast Malaysia. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)

D., Ramasamy and Mahendran, Samykano and Zamri, Mohamed and S., Vijayan (2010) Design Optimization of Air Intake System (AIS) of 1.6L Engine by Adding Guide Vane. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 999-1003., 2181. ISSN ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online) (Published)

D., Ramasamy and Mahendran, Samykano and Zainal Ambri, Abdul Karim and T., Nagarajan (2010) Design of Valve Less Micropump Using Preliminary Characteristics from Fluid Flow. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 1589-1592., II. ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online) (Published)

Mahendran, Samykano (2010) Micro-Edm:Overview And Recent Developments. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . (Published)

Reports

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Research Book Profile

Mahendran, Samykano and Md. Mustafizur, Rahman and Kumaran, Kadirgama and Jose, Rajan and Devarajan, Ramasamy and Muhamad, Mat Noor and Nurul Akmal, Che Lah and Pooria, Pasbakhsh (2016) Synthesis and characterization of one dimensional modified cobalt Nanowires for nanoscale mechanical. , [Research Book Profile: Research Report] (Unpublished)

Kumaran, Kadirgama and Rahman, M. M. and Devarajan, Ramasamy and Mahendran, Samykano and Jose, Rajan Fundamental study of hybrid graphene oxide and nanofibrillated cellulose for aircraft wings application. , [Research Book Profile: Research Report] (Unpublished)

Thesis

Mahendran, Samykano (2015) Physical and mechanical characterization of electrodeposited nickel nanowires - influence of current density and external magnetic field. PhD thesis, North Carolina A&T State University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahendran, Samykano and T., Nagarajan and Dr., Majdi and D., Ramasamy and K., Kadirgama and M. M., Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

D., Ramasamy and Mahendran, Samykano and K., Kadirgama and Lee, Giok Chui and M. M., Noor and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS). Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).