Items where Author is "Mohd Hazwan, Yusof"

Article

Khan, Sanjay and Sudhakar, Kumarasamy and Mohd Hazwan, Yusof and Sundaram, Senthilarasu (2024) Review of building integrated photovoltaics system for electric vehicle charging. The Chemical Record, 24 (3). pp. 1-29. ISSN 1528-0691. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2023) Building integrated photovoltaics powered electric vehicle charging with energy storage for residential building: Design, simulation, and assessment. Journal of Energy Storage, 63 (107050). ISSN 2352-152X. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2023) Comparison of mono and bifacial modules for building integration and electric vehicle charging: A case study in Sweden. Energy Conversion and Management: X, 20 (100420). ISSN 2590-1745. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof and Wan Azmi, Wan Hamzah and Ali, Hafiz Muhammad (2023) Roof integrated photovoltaic for electric vehicle charging towards net zero residential buildings in Australia. Energy for Sustainable Development, 73. pp. 340-354. ISSN 0973-0826. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2022) Techno-Environmental Analysis of Facade Integrated Photovoltaics and Electric Vehicle Charging for University Building. Mathematical Problems in Engineering, 2022 (7186009). ISSN 1024-123X (print); 1563-5147 (online). (Published)

Elghool, Ali and F., Basrawi and Ibrahim, Thamir K. and Ibrahim, Hassan and M., Ishak and Mohd Hazwan, Yusof and Bagaber, Salem Abdullah (2020) Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection. Energy, 208 (118270). pp. 1-21. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Ahmad Syazwan, Ramli and F., Basrawi and Mohd Hazwan, Yusof and Oumer, A. N. and Nur Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat and Khairul, Habib and Ibrahim, Thamir Khalil (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7. ISSN 0737-3937 (Print) 1532-2300 (Online). (Published)

Katanoda, Hiroshi and Mohd Hazwan, Yusof and Morita, Hiromitsu (2015) Energy Separation Mechanism in Unconfined Laminar Compressible Vortex. International Journal of Refrigeration, 59. pp. 115-123. ISSN 0140-7007. (Published)

Book Chapter

Mohd Hazwan, Yusof and Amirul Nawaf, Esa and Muhammad Fadhli, Suhaimi (2023) Thermal Comfort Attainment by Personal Vortex Tube Cooling Device. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer Science and Business Media Deutschland GmbH, pp. 263-271. ISBN 978-981-19-6687-3

Conference or Workshop Item

Nur Shuhada, Adnan and Wan Nur Adibah, Wan Hisamudin and Mohd Hazwan, Yusof and Muhammad Fadhli, Suhaimi (2024) Effect of tube length on the performance of cooling necklace with vortex tube cold flow generator. In: Journal of Physics: Conference Series. Journal of Physics: Conference Series; 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12 - 13 September 2023 , Kuantan. pp. 1-11., 2688 (012017). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Luqman, Abdul Halim and Firdaus, Basrawi and Mohd Yusof, Taib and Mohd Hazwan, Yusof and Zulkifli, Mustafa and Thamir K., Ibrahim (2020) A preliminary study on new cooling techniques for stingless bees hive. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Lim, Sheh Hong and Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2020) Experimental study on the performance of vortex tube cooling device on a cooling jacket. In: IOP Conference Series: Earth and Environmental Science, 10th International Conference on Future Environment and Energy , 7-9 January 2020 , Kyoto, Japan. pp. 1-8., 581 (012018). ISSN 1755-1315 (Published)

Chen, James Lau Tze and Azizuddin, Abd Aziz and A. N., Oumer and Mohd Hazwan, Yusof (2019) Energy efficiency analysis in office building through thermal modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (1). ISSN 1757-8981 (Published)

Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2019) The effect of tube length and cold exit diameter on the cold flow temperature of vortex tube using high temperature working gas. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical EngineeringInternational Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012040). ISSN 1757-899X (Published)

Firdaus, Basrawi and Leon, Y. C. and Ibrahim, Thamir K. and Mohd Hazwan, Yusof and A. A., Razak and Shaharin Anwar, Sulaiman and Yamada, Takanobu (2018) Experimental analysis on the effect of area of surface cooling for a water-cooled photovoltaic. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. 1 -6., 225 (01011). ISSN 2261-236X (Published)

Firdaus, Basrawi and Al-Anati, A. I. M. and Ibrahim, Thamir K. and Mohd Hazwan, Yusof and A. A., Razak and Shaharin Anwar, Sulaiman and Yamada, Takanobu (2018) Theoretical analysis on the micro gas turbine integrated solar farm for power output stabilization. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. 1 -6., 225 (04012). ISSN 2261-236X (Published)

Luqman, Abdul Halim and Firdaus, Basrawi and Chong, Jia Zheng and Oumer, A. N. and Ahmmad Shukrie, Md Yudin and Mohd Hazwan, Yusof and Shaharin, A Sulaiman (2018) Preliminary study on drying of stingless bee pot pollen using novel fluidized bed dryer with swirling distributor. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. pp. 1-5., 225 (04007). ISSN 2261-236X (Published)

Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2018) The effect of tube length, cold exit diameter and high temperature of working gas on the cold flow temperature of vortex tube. In: International Postgraduate Conference On Mechanical Engineering , 31 Oktober 2018 , Universiti Malaysia Pahang. pp. 1-9.. (Unpublished) (Unpublished)

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Daing Mohamad Nafiz, Daing Idris and Khairul, Habib and Mohd Hazwan, Yusof (2018) Analysis on the Performance of a Prototype of Thermoelectric based Power Generation System. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (02019). ISSN 2261-236X (Published)

F., Basrawi and A. Rahman, A Hamid and Mohd Ridzuan, Baharin and Mohd Najib, Mohd Noordin and Mohd Hazwan, Yusof (2017) A preliminary study on the thermal performance of a ventilated honey cassette for stingless bees. In: UTP-UMP Symposium on Energy Systems, SES 2017 , 26-27 September 2017 , Perak, Malaysia. pp. 1-6., 131. ISSN 2261236X (Published)

Mohd Hazwan, Yusof and Muhammad Fadhli, Suhaimi and Mohd Hilmi, Mohd Aris and Syed Mohammad, Akhtar (2016) Numerical Study on the Effect of Geometrical Parameters on the Performance of Vortex Tube Cooling Device Using Simflow. In: International Conference on Science, Engineering, Management and Social Sciences (ICSEMSS 2016) , 6-8 October 2016 , Universiti Teknologi Malaysia. pp. 1-8.. (Published)

Mohd Hazwan, Yusof and Katanoda, Hiroshi (2016) Mixing Temperature Measurement of Swirl Cold Flow Exiting Cold Exit of Vortex Tube. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-5., 38 (01006). ISSN 2261-236X (Published)

Thesis

Mohd Hazwan, Yusof (2015) A study on energy separation mechanism in Ranque-Hilsch vortex tube. PhD thesis, Kagoshima University (Contributors, Thesis advisor: Katanoda, Hiroshi).