Items where Author is "Mohd Nizar, Mhd Razali"

Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltier-based cooling refrigerator supplied by small scale PV. In: Engineering Technology International Conference (ETIC 2022). Engineering Technology International Conference (ETIC 2022) , 7-8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 159-163., 2022. ISBN 978-1-83953-782-0 (Published)

Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltierbased cooling refrigerator supplied by small scale PV. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 159-163., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)

Nurul Hasya, Md. Kamil and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Siti Nadiah, Mohd Saffe and Musfirah, Abdul Hadi (2022) Micromilling performance analysis – cold air assisted aluminium machining behaviour observation. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 124-130., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)

Nurul Hasya, .Md Kamil and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Siti Nadiah, Mohd Saffe (2022) Micromilling performance analysis – cold air assisted aluminium machining behaviour observation. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 124-130., 2022 (12). ISBN 978-1-83953-781-3 (Published)

Mohd Nizar, Mhd Razali (2021) TUBE IPT memperkasa agend keusahawanan IPT dan mengatasi masalah pengangguran. Sinar Harian .

Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Azzuhana, Roslan and Roziana, Shahril and Zulhaidi, Mohd Jawi and Khairil Anwar, Abu Kassim (2021) Potential application of Artificial Neural Network (ANN) analysis method on Malaysian road crash data. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 95-105. ISSN 2636-9575. (Published)

N. H. K., Anuar and Mohd Nizar, Mhd Razali and Mohamad Rusydi, Mohamad Yasin and Musfirah, Abdul Hadi and Abdul Nasir, Abd Ghafar (2021) Custom centrifugal pump performance in supplying high viscos liquid. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 80-88. ISSN 2636-9575. (Published)

Nur Aini Safiah, Abdullah and Fatin Farisha, Abdullah and Amirul Hakim, Sufian and Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2021) Effect of degradation by temperature onto nitrile rubber elastomer mechanical properties. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1941-1946., 48 (6). ISSN 2214-7853 (Published)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2021) Recent Study on Hard to Machine Material – Micromilling process. Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (2). pp. 445-453. ISSN 2432-5953 (Online). (Published)

Ainur Munira, Rosli and Norlida, Jamil and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and A. R., Yusoff (2021) Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 589-597.. ISBN 978-981-15-9505-9 (Published)

Mohd Syafiq, Sharip and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) Gas Separation Performance through Carbon Membrane: The Effect of Polymer Composition. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (2). pp. 177-187. ISSN 2289-7879. (Published)

Nurul Farhana, Mohadzir and Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) In-situ worn geometry effect over the surface roughness propagation during micro milling process. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 1-7. ISSN 2636-9575. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) New Perspectives on Fuel Cell Technology: A Brief Review. Membranes, 10 (5). pp. 1-18. ISSN 2077-0375. (Published)

Muhammad Fahmi Izuwan, . and Ahmad Redza, Ahmad Mokhtar and Mohd Nizar, Mhd Razali (2020) Study on operational characteristic of microwave oven driven plasma spray device. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 558-563.. ISBN 978-981-15-0950-6 (Published)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Akira, Hosokawa and Furumoto, Tatsuaki and Mohd Shahril, Osman (2019) Bold approach in finite element simulation on minimum quantity lubrication effect during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 33-41. ISSN 2636-9575. (Published)

Mohd Syafiq, Sharip and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Farhana, Aziz and Mohd Hafiz Dzarfan, Othman (2019) Current advances in membranes for competent hydrogen purification: A short review. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 390-395.. ISBN 978-981-15-0950-6 (Published)

Norazlianie, Sazali and Mohd Syafiq, Yusoff and Ihsan Naiman, Ibrahim and Haziqatulhanis, Ibrahim and Mohd Nizar, Mhd Razali and Wan Norharyati, Wan Salleh (2019) Dip-coating methods for carbon membrane fabrication: Effects of coating-carbonization-cycles on Hydrogen separation prepared from BTDA-TDI/MDI (P-84) polyimide blends with Nanocrystalline cellulose (NCC). In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 384-389.. ISBN 978-981-15-0950-6 (Published)

Chia, Yun Qi and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Ahmad Redza, Ahmad Mokhtar and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2019) Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 42-50. ISSN 2636-9575. (Published)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Amiril Sahab, Abdul Sani and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2018) Modelling of fuzzy inference system for micro milling - a preliminary study through FEM. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 445-456. ISBN 978-981-13-8323-6