Items where Author is "Muhamad, Mat Noor"

Hongkun, Lu and Muhamad, Mat Noor and Li, Li and Kadirgama, Kumaran (2024) Numerical simulation on the spray angle of the dual-layer hole nozzle in a partition combustion system of the diesel Engine. Journal of Advanced Research in Numerical Heat Transfer, 19 (1). pp. 29-42. ISSN 2735-0142. (Published)

Hizanorhuda, Zurghiba and Kumaran, Kadirgama and Muhamad, Mat Noor and Rosli, Abu Bakar and Semin, S. (2024) Automotive radiators : An experimental analysis of hybrid nanocoolant. In: E3S Web of Conferences; 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-7., 488 (02004). ISSN 2555-0403 (Published)

Kulandaivel, Sridhar and Ngui, Wai Keng and Samykano, Mahendran and Reji Kumar, R. and Suraparaju, Subbarama Kousik and Sofiah, A. G. N. and Muhamad, Mat Noor (2024) Enhanced Heat Transfer Efficiency through Formulation and Rheo-Thermal Analysis of Palm Oil-Based CNP/SiO2 Binary Nanofluid. Energy Technology. pp. 1-13. ISSN 2194-4288. (In Press / Online First) (In Press / Online First)

Norkhairani, Abdul Rawi and Abd. Rasid, Mamat and Maizan, Mat Amin and Muhamad, Mat Noor (2023) Aplikasi perbincangan maya sebagai alat kelangsungan pekerjaan semasa PKP. In: Pandemik Covid-19 dan perubahan landskap kehidupan masyarakat. Penerbit UMP, pp. 13-27. ISBN 978-967-2831-80-8

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhamad, Mat Noor and Rosli, Abu Bakar and Subramonian, Sivarao and Talal, Yusaf and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2023) Enhancing Heat Transfer in Compact Automotive Engines using Hybrid Nano Coolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943. (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Shaili Falina, Mohd Sukri and Mohd Nasyriq, Syamsul (2022) A comparative modelling study of new robust packaging technology 1 mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Falina, Shaili and Mohd, Syamsul (2022) A comparative modelling study of new robust packaging technology 1mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Muhamad, Mat Noor (2022) Renewable Energy, A Tube Solar Collector using Nanofluids. FTKMA Bulletin, 3 . p. 30. ISSN 2773-594X

Lu, Hongkun and Muhamad, Mat Noor and Kadirgama, Kumaran (2022) Numerical simulation of influence of eccentric needle movement on internal flow characteristics of groove-type voc nozzle. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 447-457., 2022 (22). ISSN 27324494 ISBN 978-183953782-0 (Published)

Arvind, Kottasamy and Mahendran, Samykano and Kumaran, Kadirgama and Rahma, Mustafizur and Muhamad, Mat Noor (2021) Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique. Journal of Advanced Manufacturing Technology, 119. pp. 5211-5232. ISSN 2289-8107. (Published)

Muhamad, Mat Noor (2020) The Importance of MILD Combustion, Biogas and The Impact on The Global Warming. UMP News .

Rahman, M. M. and Kumaran, Kadirgama and Devarajan, Ramasamy and Wan Sharuzi, Wan Harun and Rizalman, Mamat and Muhamad, Mat Noor (2018) Biodiesel-diesel (up to 45%) fuel characteristics on homogeneous charge compression ignition engine. , [Research Book Profile: Research Report] (Unpublished)

Rahman, M. M. and Muhamad, Mat Noor and Abdul Adam, Abdullah and Rosli, Abu Bakar and Rizalman, Mamat and Kumaran, Kadirgama and Devarajan, Ramasamy (2018) Impact biodiesel fuel characteristics on ultra-low emission homogeneous charge compression ignition engine. , [Research Book Profile: Research Report] (Unpublished)

Mahendran, Samykano and Md. Mustafizur, Rahman and Kumaran, Kadirgama and Jose, Rajan and Devarajan, Ramasamy and Muhamad, Mat Noor and Nurul Akmal, Che Lah and Pooria, Pasbakhsh (2016) Synthesis and characterization of one dimensional modified cobalt Nanowires for nanoscale mechanical. , [Research Book Profile: Research Report] (Unpublished)

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Mohd Ruzaimi, Mat Rejab and Muhamad, Mat Noor and Rahman, Md Mustafizur and Kadirgama, Kumaran and Mohd Shahrir Mohd, Sani and Ahmad Nasser, Mohd Rose and Rosli, Abu Bakar and Ahmad Syahrizan, Sulaiman (2008) Implementation of outcome based education in the faculty of mechanical engineering, universiti malaysia pahang : An experience. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished) (Unpublished)

Muhamad, Mat Noor and Kadirgama, Kumaran and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Md Mustafizur, Rahman and Ahmad Syahrizan, Sulaiman (2008) Quality management system in implementation of outcome based education at faculty of mechanical engineering, universiti malaysia pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished) (Unpublished)

Ramasamy, Devarajan and Muhamad, Mat Noor and Azlyna, Senawi and Ahmad Syahrizan, Sulaiman (2008) Static recovery process modelling of engineering metallic alloys. In: Proceeding of Malaysian Metallurgical Conference (MMC 2008) , 3-4 December 2008 , UKM, Bangi, Selangor. pp. 1-5.. (Published)