Items where Author is "Noor, M. M."

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 20.

Article

Iskandar, Hasanuddin and Akram, Tamlicha and Samsul, Rizal and Noor, M. M. and Ikramullah, . and Nazaruddin, Nazaruddin (2024) The simulation of drop-weight impact test on ramie-eglass hybrid fiber composite for kayoh jaloe wall material. Jurnal Polimesin, 22 (1). pp. 75-82. ISSN 2549-1999. (Published)

Hong Kun, Lu and Noor, M. M. and Wenlin, Yu and K., Kadirgama and Badruddin, I. A. and Kamangar, S. (2024) Experimental research on heat transfer characteristics of a battery liquid-cooling system with ⊥-shaped oscillating heat pipe under pulsating flow. International Journal of Heat and Mass Transfer, 224 (125363). pp. 1-15. ISSN 0017-9310. (Published)

Edy, Fradinata and Noor, M. M. and Zurnila Marli, Kesuma and Sakesun, Suthummanon and Didi, Asmadi (2024) Leveraging hybrid ANN–AHP to optimize cement industry average inventory levels. International Journal of Advances in Intelligent Informatics, 10 (1). pp. 159-170. ISSN 2442-6571. (Published)

Hossain, Md Naeem and Rahman, M. M. and Ramasamy, Devarajan and Kadirgama, Kumaran and Noor, M. M. (2024) Advancements, challenges, and implications for navigating the autonomous vehicle revolution. Journal of Mechanical Engineering and Sciences (JMES), 18 (2). pp. 10077-10093. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rajamony, R. K. and Mahendran, Samykano and Pandey, A. K. and Babu, S. Ramesh and Noor, M. M. and Devarajan, R. and Paw, J. K. Siaw and Natarajan, S. K. (2023) Investigation on thermophysical properties of multi-walled carbon nanotubes enhanced salt hydrate phase change material. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10595-10605. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Yadav, A. and Mahendran, Samykano and Pandey, A. K. and Tyagi, V. V. and Devarajan, R. and Sudhakar, K. and Noor, M. M. (2023) A systematic review on bio-based phase change materials. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (2). pp. 10547-10558. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Rao, N.T. and Oumer, A. N. and Noor, M. M. and Kadirgama, K. and Basrawi, F. and Siregar, J. P. (2023) Parametric optimisation of supercritical CO2 thermal-hydraulic characteristics in microchannels using response surface methodology. Australian Journal of Mechanical Engineering, 21 (3). pp. 894-910. ISSN 1448-4846. (Submitted) (Submitted)

Sofiah, A. G. N. and Samykano, M. and Shahabuddin, S. and Kadirgama, K. and Pandey, A. K. and Noor, M. M. (2021) A brief review on thermal behaviour of PANI as additive in heat transfer fluid. Emerging Advances in Integrated Technology, 2 (1). 47 -52. ISSN 2773-5540. (Published)

Conference or Workshop Item

Kumaresen, Mohanaravi and Mahendran, Samykano and Satesh, Namasivayam and K., Kadirgama and Noor, M. M. and Subbarama, Kousik Suraparaju (2024) Design and development of a biomimetic solar tree for sustainable cogeneration : An energy and exergy assessment. In: E3S Web of Conferences; 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-17., 488 (02002). ISSN 2555-0403 (Published)

M., Norhafana and C. K., Ihsan and Noor, M. M. and A. A., Hairuddin and K., Kadirgama and D., Ramasamy and Hussein, A. M. (2024) Enhancement of Efficiency and Mitigation of Pollutan Emissions in a Compression Ignition Engine by the Utilization of Rice Bran Oil as Green Fuel. In: Journal of Physics: Conference Series. 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023) , 12-13 September 2023 , AC Marriot Hotel, Kuantan, Pahang. pp. 1-23., 2688 (012024). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Shaalan, Z. A. and Hussein, A. M. and Abdullah, M. Z. and Noor, M. M. (2024) Evaluation of stability and enhancement of nano fluid methods. In: Journal of Physics: Conference Series; 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12 - 13 September 2023 , Kuantan. pp. 1-13., 2688 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Selvam, A. and Noor, M. M. and Norhafana, M. and Ihsan, C. K. and Khalid, A. and Mahmood, R. A. and Harikrishnan, S. and Nayak, S. (2024) The simulation of biogas combustion in top open burner. In: Journal of Physics: Conference Series; 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023) , 12 - 13 september 2023 , Kuantan, Malaysia. pp. 1-18., 2688 (012023). ISSN 1742-6596 (Published)

M., Norhafana and C. K., Ihsan and Noor, M. M. and A. A., Hairuddin and K., Kadirgama and D., Ramasamy (2023) Emission characteristics effect on rice bran oil enriched with diesel fuel on compression ignition engine. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 75 -88.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Research Report

Samykano, M. and Rahman, M. M. and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Reza, M. S. and Harun, W. S W and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system. , [Research Report] (Unpublished)

Viswanatha Sharma, Korada and Azmi, W. H. and Bakar, R. A. and Noor, M. M. and Kadirgama, Kumaran and Reddy Prasad, D. M. (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. , [Research Report] (Unpublished)

Samykano, M. and Nagarajan, T. and Majdi, . and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM. , [Research Report] (Unpublished)

Ramasamy, D. and Samykano, M. and Kadirgama, Kumaran and Lee, Giok Chui and Noor, M. M. and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method. , [Research Report] (Unpublished)

Nik Mohamed, Nik Mohd Zuki and Noor, M. M. and Rose, Ahmad Nasser Mohd and Razali, Noraini Mohd and Daud, Rosdi and Shalahim, N. S M and Ahmad, Syarifah Nur Aqida Syed (2008) Development of laser cutting and engraving machine utilising PC-NC controller. , [Research Report] (Unpublished)

Noor, M. M. and Rahman, M. M. and Sani, M. S.M. and Julie Juliewatty, Mohammed and Nik Mohamed, Nik Mohd Zuki and Rose, Ahmad Nasser Mohd (2008) Numerical study on fatigue life of spot welded for automotive components. , [Research Report] (Unpublished)

Amirruddin, A. K. and Rahman, M. M. and Noor, M. M. and Ramasamy, D. and Harun, W. S W Investigation of dispersion, stability, and tribological performance of oil-based graphene and copper nanofluids. , [Research Report] (Unpublished)

This list was generated on Thu Nov 14 23:24:51 2024 +08.