Items where Author is "Oumer, A. N."

Article

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2023) A low-cost digital torquemeter coordinated by arduino board. International Journal of Integrated Engineering, 15 (1). 118 -130. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Inn, Lai Qit and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Numerical Analysis of Battery Thermal Management System of Electric Vehicle. Journal of Advanced Research in Numerical Heat Transfer, 13 (1). pp. 106-114. ISSN 2735-0142. (Published)

Rao, N.T. and Oumer, A. N. and Noor, M. M. and Kadirgama, K. and Basrawi, F. and Siregar, J. P. (2023) Parametric optimisation of supercritical CO2 thermal-hydraulic characteristics in microchannels using response surface methodology. Australian Journal of Mechanical Engineering, 21 (3). pp. 894-910. ISSN 1448-4846. (Submitted) (Submitted)

Sanderasagran, A. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Idris, Mat Sahat (2022) Alternative method of nature inspired geometrical design strategy for drag induced wind turbine blade morphology. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). pp. 9759-9772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Faeeza, Abdul Halim and Firdaus, Basrawi and Ahmad Syazwan, Ramli and Oumer, A. N. and Nurul Aini, Mohd Azman (2022) Effect of surface roughness and temperature on the performance of low-temperature vacuum drying with induced nucleation boiling method in dewatering stingless bees honey. Drying Technology. pp. 1-13. ISSN 0737-3937. (In Press / Online First) (In Press / Online First)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and Oumer, A. N. (2022) Modelling and optimization of energy efficient assembly line balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Hadi, A. E. and Tezara, C. and Fitriyana, D. F. and Siregar, J. P. and Oumer, A. N. and Hamdan, M. H. M. and Jaafar, J. and Zalinawati, M. and Irawan, A. P. (2021) Effect of water absorption behaviour on tensile properties of hybrid jute-roselle woven fibre reinforced polyester composites. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9170-9178. ISSN 2180-1606. (Published)

Tezara, Cionita and Hadi, Agung Efriyo and Siregar, J. P. and Zalinawati, Muhamad and Mohammad Hazim, Mohamad Hamdan and Oumer, A. N. and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Fitriyana, Deni Fajar (2021) The effect of hybridisation on mechanical properties and water absorption behaviour of woven jute/ramie reinforced epoxy composites. Polymers, 13 (17). pp. 1-17. ISSN 2073-4360. (Published)

G., Sashwin Nair and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan (2021) Flow and heat transfer simulation analysis of 3D compact heat exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (3). pp. 71-87. ISSN 2289-7879. (Published)

M., Zalinawati and Siregar, J. P. and Tezara, C. and Jaafar, J. and M. H. M., Hamdan and Oumer, A. N. and T., Rihayat (2020) Effect of surface modification on mechanical properties of buri palm (Corypha Utan) fibre composite reinforcement. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8298-8309. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zalinawati, M. and J. P., Siregar and C., Tezara and Jaafar, Jamiluddin and Oumer, A. N. and Norazlianie, Sazali and M. H. M., Hamdan (2020) The effect of fibre treatment on water absorption and mechanical properties of buri palm (corypha utan) fibre reinforced epoxy composites. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7379-7388. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Azli, Abd Razak (2020) An introductory CFD analysis study of novel cavity vane driven wind turbine blade design. Journal of Mechanical Engineering, 17 (3). pp. 55-68. ISSN 1823-5514. (Published)

Ahmmad Shukrie, Md Yudin and Oumer, A. N. and N. F. M., Roslan and Mohd Azlan, Zulkarnain (2020) Computational and experimental study on pressure drop in a fluidised bed with different air distributor designs. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 8043 -8051. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Naidu Sanderasagran, Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. (2020) A rudimentary computational assessment of low tip speed ratio asymmetrical wind turbine blades. International Journal of Integrated Engineering, 12 (4). pp. 89-103. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Oumer, A. N. and Chen, James Lau Tze and Azizuddin, Abd Aziz (2019) A review on thermo-physical properties of bio, non-bio and hybrid nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5875-5904. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Baheta, Aklilu Tesfamichael and Oumer, A. N. and Hailegiorgis, Sintayehu M. (2018) Analysing the Thermal Performance of Heat Pipe Using Copper Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155. ISSN 2289-7879. (Published)

Oumer, A. N. and M. M., Hasan and Baheta, Aklilu Tesfamichael and R., Mamat and Abdul Adam, Abdullah (2018) Bio-based liquid fuels as a source of renewable energy: A review. Renewable and Sustainable Energy Reviews, 88. pp. 82-98. ISSN 1364-0321. (Published)

Ahmad Syazwan, Ramli and F., Basrawi and Mohd Hazwan, Yusof and Oumer, A. N. and Nur Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat and Khairul, Habib and Ibrahim, Thamir Khalil (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7. ISSN 0737-3937 (Print) 1532-2300 (Online). (Published)

Conference or Workshop Item

Moey, L.K. and Alyazidi, S. M. S. and Tai, V. C. and Kai-Seun, J. W. and Mathew, P. R. and Oumer, A. N. (2023) Effect of opening ratios with and without louvers in cross ventilation using CFD. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 579 -594.. ISSN 2195-4356 ISBN 978-981191456-0

Moey, L. K. and Tok, R. J. and Tai, V. C. and Mathew, P. Reuben and Wu, J. Kai-Seu and Oumer, A. N. (2023) Investigation of opening position on natural cross ventilation for an isolated building. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 825 -838.. ISSN 2195-4356 ISBN 978-981191456-0

M. H. M., Hamdan and Siregar, J. P. and Tezara, C. and Rusiyanto, R. and Oumer, A. N. and J., Jaafar and M., Zalinawati (2021) Effect of fabric orientations on mechanical properties of hybrid jute-ramie reinforced unsaturated polyester composites. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-13., 700 (1). ISSN 1755-1307

Hamood, M and Oumer, A. N. and Azizuddin, Abd Aziz and M., Ishak and Siregar, J. P. and Mamat, O (2021) Heat transfer analysis in compact heat exchanger with fibre reinforced plate. In: IOP Conference Series: Materials Science and Engineering, Volume 1078, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , Pekan, Malaysia , 19-20 January 2021. pp. 1-9., 1078. ISSN 1757-8981 (Print); 1757-899X (Online)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2021) A review on the prospect of wind power as an alternative source of energy in Malaysia. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-17., 1078 (012017). ISSN 1757-899X

Chen, J. L. T. and Oumer, A. N. and Azizuddin, Abd Aziz (2020) Stability and density analysis of mango bark and mango leaf nanofluids. In: IOP Conference Series: Materials Science and Engineering; Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863 (012061). ISSN 1757-899X

S. N., Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2019) Comparative power extraction analysis of novel nature inspired vertical axis wind turbines. In: UTP-UMP-VIT Symposium on Energy System 2019 , 1-2 October 2019 , UMP Pekan. p. 1.. (Unpublished)

Luqman, Abdul Halim and Firdaus, Basrawi and Chong, Jia Zheng and Oumer, A. N. and Ahmmad Shukrie, Md Yudin and Mohd Hazwan, Yusof and Shaharin, A Sulaiman (2018) Preliminary study on drying of stingless bee pot pollen using novel fluidized bed dryer with swirling distributor. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. pp. 1-5., 225 (04007). ISSN 2261-236X

Nuruzzaman, D. M. and Kusaseh, N. and Chowdhury, M. A. and Rahman, N. A. N. A. and Oumer, A. N. and Fatchurrohman, Nanang and Iqbal, A. K. M. A. and N. M., Ismail (2018) Experimental investigation on flexure and impact properties of injection molded polypropylene-nylon 6-glass fiber polymer composites. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7.. (Unpublished)

Rao, N. Thiwaan and Oumer, A. N. and Devandran, G. and M. M., Noor (2018) Investigation on Flow and Heat Transfer of Supercritical CO2 in Helical Coiled Tubes at Various Supercritical Pressures. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (01018). ISSN 2261-236X

Suhailah, Sujali and Mohd Rusllim, Mohamed and Oumer, A. N. and Azizan, Ahmad and Leung, P. (2018) Study on architecture design of electroactive sites on Vanadium Redox Flow Battery (V-RFB). In: International Conference on Renewable Energy and Environment Engineering (REEE 2018) , 29-31 October 2018 , Paris, France. pp. 1-5..

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak and R., Mamat and Abdul Adam, Abdullah (2018) Thermal and Fluid Dynamic Analysis of Compact Fin-and-Tube Heat Exchangers for Automotive Applications. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (05019). ISSN 2261-236X

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Chowdhury, Mohammad Asaduzzaman and Oumer, A. N. and Noor Mazni, Ismail and Shahnor, Basri (2017) Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites. In: 5th International Conference and Exhibition Sustainable Energy and Advanced Material (ICE-SEAM) , 16-19 October 2017 , Melaka, Malaysia. pp. 1-5.. (Unpublished)

Luqman, Abdul Halim and Mohamad Firdaus, Basrawi and Azizuddin, Abd Aziz and Zulkifli, Mustafa and Oumer, A. N. and Ahmad Syazwan, Ramli (2017) A new cooling technique for stingless bees hive. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2017 (SES 2017) , 26-27 September 2017 , Perak, Malaysia. pp. 1-6., 131 (03013). ISSN 2261236X

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak (2016) Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangers. In: National Conference for Postgraduate Research (NCON-PGR) , 24-25 September 2016 , Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Unpublished)