Items where Author is "S. A., Che Ghani"

Article

A., Asogan and N., Sazali and F. M., Said and R. Z., Edros and M. F., Ghazali and S. A., Che Ghani (2023) A Mini Review on Working Mechanism, Standard Operating Procedure (SOP) and Preventative Maintenance of Low Temperature Long Term (LTLT) Milk Pasteurizer. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 24-29. ISSN 2636-9575. (Published)

Munirah, Nawi and Norazlianie, Sazali and S. A., Che Ghani and Kettner, Maurice (2021) Newly Developed Thermal Load Profile for Enhancement in Hot Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 83-94. ISSN 2289-7879. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Nasir, Meseret and Mahfodzah, M. Padzi (2020) Innovation on Manual Wheelchair for Hemiplegic and Tetraplegic Patients. Journal of Advanced Research in Dynamical & Control Systems, 10 (13S). pp. 1221-1235. ISSN 1943-023X. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and M., Ishak and W. S., Wan Harun and N., Daud (2020) A Review on Electric Wheelchair Innovation to Ease Mobility and As a Rehabilitation Tool for Spinal Cord Impairment Patient. International Journal of Engineering and Technology, 10 (3). pp. 803-815. ISSN 0975-4024. (Published)

Norazlianie, Sazali and M. F., Ghazali and S. A., Che Ghani and Wan Norharyati, Wan Salleh (2020) A Short Review on Developing Membrane Proficiency for Water Energy Sustainability. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 72-80. ISSN 2289-7879. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and R. A. R., Maarof (2020) Validation test on thresholds for wheelchair power-assist system activation using population data. International Journal of Advanced Science and Technology, 29 (8S). pp. 4387-4395. ISSN 2005-4238. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Mahfodzah, M. Padzi (2019) Development of a wireless surface electromyography (sEMG) signal acquisition device for power-assisted wheelchair system. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3414-3418. ISSN 2249-8958. (Published)

Norfazillah, Talib and Amiril Sahab, Abdul Sani and Erween, Abd Rahim and S. A., Che Ghani and Syahrullail, Samion (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19. pp. 98-106. ISSN 2289-7232. (Published)

Vorathin, E. and Mohd Hafizi, Zohari and S. A., Che Ghani and Siregar, J. P. and K. S., Lim (2018) FBGs Real-Time Impact Damage Monitoring System of GFRP Beam Based on CC-LSL Algorithm. International Journal of Structural Stability and Dynamics, 18 (5). p. 1850075. ISSN 0219-4554. (Published)

W. S., Wan Harun and Kamariah, M. S. I. N. and Norhamidi, Muhamad and S. A., Che Ghani and Ahmad, Faiz and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

W. S., Wan Harun and R. I. M., Asri and Juliawati, Alias and Farah Hanani, Zulkifli and K., Kadirgama and S. A., Che Ghani and Jun Haslinda, Haji Shariffuddin (2018) A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials. Ceramics International, 44 (2). pp. 1250-1268. ISSN 0272-8842. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Nasir, Meseret and Mahfodzah, M. Padzi (2018) Smart Door Lock System Using Bluetooth Based Android for Smartphone with Door Lock Keypad. Journal of Advanced Research in Dynamical & Control Systems, 10 (13S). pp. 1246-1254. ISSN 1943-023X. (Published)

W. S., Wan Harun and Kamariah, M. S. I. N. and N., Muhamad and S. A., Che Ghani and F., Ahmad and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mahendran, Samykano and Nurul Akmal, Che Lah and S. A., Che Ghani and F., Tarlochan and M. R., Raza (2017) Corrosion and Surface Modification on Biocompatible Metals: A Review. Materials Science and Engineering: C, 77. pp. 1261-1274. ISSN 0928-4931. (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Osada, Toshiya and S. A., Che Ghani and Dayangku Noorfazidah, Awang Shri (2017) Effect of sintering parameters on physical properties of SS 316L alloy compact. Journal of Mechanical Engineering, SI 3 (2). pp. 123-131. ISSN 1823- 5514 (Print); 2550-164X (Online). (Published)

M. F. F. A., Hamidi and W. S., Wan Harun and M., Samykano and S. A., Che Ghani and Z., Ghazalli and F., Ahmad and A. B., Sulong (2017) A Review of Biocompatible Metal Injection Moulding Process Parameters for Biomedical Applications. Materials Science and Engineering: C, 78. pp. 1263-1276. ISSN 0928-4931. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani (2017) Volume Measuring System Using Arduino for Automatic Liquid Filling Machine. International Journal of Applied Engineering Research (IJAER), 12 (24). pp. 14505-14509. ISSN 0973-4562 (print); 1087-1090 (online). (Published)

S. A., Che Ghani and Abdul Malek, Nor Mohd Syamsi and W. S., Wan Harun and Adnan, Zahrul and M. F. F., Ab Rashid and Ramli, Mohd Hazlen and Omar, Asnawi (2016) Finite Element Analysis of Porous Medical Grade Cobalt Chromium Alloy Structures Produced by Selective Laser Melting. Advanced Materials Research, 1133. pp. 113-118. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zahrul Adnan, Mat Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and Mohd Asnawi, Omar and Hazlen, Ramli (2016) Dimensional Accuracy Study of Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. Advanced Materials Research, 1133. pp. 280-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani (2016) Optimization of EDM Small Hole Drilling Process Using Taguchi Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2501-2504. ISSN 1819-6608. (Published)

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mas Ayu, Hassan and S. A., Che Ghani and Z., Buyong (2016) A Review of Hydroxyapatite-Based Coating Techniques: Sol–Gel and Electrochemical Depositions on Biocompatible Metals. Journal of the Mechanical Behavior of Biomedical Materials, 57. pp. 95-108. ISSN 1751-6161. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N., Mohd Rose and S. A., Che Ghani and W. S., Wan Harun (2015) Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process. Applied Mechanics and Materials, 695. pp. 558-561. ISSN 1662-7482. (Published)

Rasidi, Ibrahim and Abdul Halim, Erween and S. A., Che Ghani and A. A., Ibrahim and N. A., Maskam (2014) The Effect on the Application of Coolant and Ultrasonic Vibration Assisted Micro Milling on Machining Performance. Applied Mechanics and Materials, 660. pp. 65-69. ISSN 1662-7482. (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani and N. M. Z., Nik Mohamed and Ahmad Nasser, Mohd Rose (2014) Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization. Advanced Materials Research, 1043. pp. 65-70. ISSN 1022-6680 (print); 1662-8985 (online). (Published)

S. A., Che Ghani and Kai, Cheng and Timothy, Minton (2013) Back Chip Temperature in Environmentally Conscious Turning with Conventional and Internally Cooled Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 4. pp. 356-372. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Book Chapter

W. S., Wan Harun and Rahil Izzati, Mohd Asri and Abu Bakar, Sulong and S. A., Che Ghani and Z., Ghazalli (2018) Hydroxyapatite-Based Coating on Biomedical Implant. In: Hydroxyapatite - Advances in Composite Nanomaterials, Biomedical Applications and Its Technological Facets. InTech, pp. 69-88. ISBN 978-953-51-3805-1

Conference or Workshop Item

Aussawarangkul, Thitisak and S. A., Che Ghani and Wattanasinbumrung, Pakanun and Sawangsri, Worapong (2023) Comparative Study on the Automated Warehouse with Cartesian Robot Using PLC and Arduino. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 627-636.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

A. I., Yahaya and S. A., Che Ghani and Daing Mohamad Nafiz, Daing Idris and M. A., Aziz (2023) End-mill carbide tool wear in machining metallic biomaterial. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 783 -792.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

N. A., Abdul Muta’ali and Norazlianie, Sazali and S. A., Che Ghani and Walter, J. (2021) Water monitoring system design for data collection at specific intervals via cloud application. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-9., 1078 (012002). ISSN 1757-899X (Published)

N. A., Abdul Muta’ali and Norazlianie, Sazali and S. A., Che Ghani and Walter, J. (2021) Water quality monitoring via cloud application: Brief review. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-7., 1078 (012001). ISSN 1757-899X (Published)

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and S. A., Che Ghani and Mohd Asnawi, Omar and Mohd Hazlen, Ramli and Muhammad Hussain, Ismail (2017) Physical Properties and Microstructure Study of Stainless Steel 316L Alloy Fabricated by Selective Laser Melting. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100015). ISBN 978-0-7354-1589 (Published)

M. H., Abdullah and S. A., Che Ghani and Z., Zaulkafilai and Saiful Nizam, Tajuddin (2017) Development open source microcontroller based temperature data logger. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-13., 257 (1). ISSN 17578981 (Published)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and Lim, Kok Sing and A. M., Aizzuddin (2017) The use of an improved technique to reduce the variability of output voltage in real-time Fibre Bragg Grating based monitoring system. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , The Swiss Garden Beach Resort, Kuantan. pp. 1-11., 257 (012001). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Nurhanis Sofiah, Abd Ghafar and Kananathan, J. and Samykano, Mahendran and Ulakanathan, S. and S. A., Che Ghani and W. S., Wan Harun and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Electrochemical Deposited Nickel Nanowires: Influence of Deposition Bath Temperature on the Morphology and Physical Properties. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012032). ISSN 1757-899X (Published)

S. A., Che Ghani and Mohd Nasri, Muda and Mueller, Timo Michael and W. S., Wan Harun and Saiful Nizam, Tajuddin and M., Ishak and Anwaruddin, Hisyam (2017) Improvement of Agarwood Oil Extraction by Heat Transfer Control in Multiple Hydrodistillation Systems. In: Proceedings of 4th National Conference on Knowledge Transfer (NCKT'17) , 4-5 December 2017 , Knowledge Transfer Centre, Universiti Sains Malaysia. pp. 1-5.. ISBN 978-967-394-X-X. (Published)

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and S. A., Che Ghani and Z., Ghazalli and Dayangku Noorfazidah, Awang Sh'ri and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat (2017) Manufacture by Selective Laser Melting & Physical Behaviour of Commercial 316L Stainless Steel. In: iMEDITEC 2017 Proceeding International Medical Device and Technology Conference , 6-7 September 2017 , Johor Bahru, Malaysia. pp. 87-89.. ISBN 978-967-0194-93-6 (Published)

T., Mueller and S. A., Che Ghani and W. S., Wan Harun and A. H., Abdullah (2017) Optimization of small agarwood hydrodistillation systems: An analytical study to determine the required cooling water flow for optimal operation of an agarwood-hydrodistillation system. In: International Innovation Technology Exhibition & Conferences 2017 (iTec17) , 11 September 2017 , Kolej Kemahiran Tinggi MARA (KKTM), Kemaman, Terengganu. pp. 1-6.. (Unpublished) (Unpublished)

S. A., Che Ghani and Siti Rohaida, Mohamed and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2017) Physical Evaluations of Co-Cr-Mo Parts Processed using Different Additive Manufacturing Techniques. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100001). ISBN 978-0-7354-1589-8 (Published)

S. A., Che Ghani and Mohd Hafizu, Zakaria and W. S., Wan Harun and Zakri, Ghazalli (2017) Progressive Tool Flank Wear And Surface Roughness When Turning AISI 1017 Mild Steel Using Reduced Thickness Inserts In Finishing Cutting Conditions. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-5., 1901 (040003). ISBN 978-0-7354-1589-8 (Published)

Mohd Rasidi, Ibrahim and Najah, Mahadi and Afiff, Latif and Zulafiff, Rahim and Zazuli, Mohid and Mohammad Sukri, Mustapa and S. A., Che Ghani (2017) Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061. In: 5th Asia Conference on Mechanical and Materials Engineering (ACMME 2017) , 9-11 June 2017 , Tokyo, Japan. pp. 56-60., 909. ISSN 0255-5476 ISBN 978-303571291-9 (Published)

M. F. F. A., Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and S. A., Che Ghani and M. Z., Azir (2017) Study of Solvent Debinding Parameters for Metal Injection Moulded 316L Stainless Steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012035). ISSN 1757-899X (Published)

S. A., Che Ghani and Mohd Hafizu, Zakaria and W. S., Wan Harun and Zaulkafilai, Z. (2016) Dimensional Accuracy Of Internal Cooling Channel Made By Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) Processes In Fabrication Of Internally Cooled Cutting Tools. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (8). ISSN 2261-236X (Published)

Kaaliarasan, Ramachandran and Balakumaran, Yeesvaran and K., Kadirgama and D., Ramasamy and S. A., Che Ghani and Keeran, Anamalai (2016) State of Art of Cooling Method for Dry Machining. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90. (Published)

Siti Rohaida, Mohamed and S. A., Che Ghani and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2016) Evaluations of Co-Cr-Mo meta-biomaterial manufactured by selective laser melting for orthopaedic application. In: Symposium & Exhibition on Additive Manufacturing , 26 July 2016 , The Light Hotel, Seberang Jaya, Penang. pp. 1-5.. (Unpublished) (Unpublished)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and K. S., Lim (2016) Real-time Monitoring System of Composite Aircraft Wings Utilizing Fibre Bragg Grating Sensor. In: IOP Conference Series: Materials Science and Engineering, AEROTECH VI - Innovation in Aerospace Engineering and Technology , 8–9 November 2016 , Kuala Lumpur, Malaysia. pp. 1-9., 152 (012024). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Noor Sarbani, Wan Muhammad and Shariman, Mustafa and Syed Radzi, Rahamaddulla and S. A., Che Ghani and Anwaruddin, Hisyam (2016) Technical and Economic Feasibility Study of Coconut Shell Charcoal Production as precursor to Activated Carbon in East Coast Malaysia. In: Advances in Business Research International Conference (ABRIC2016) , 16-17 November 2016 , Langkawi, Malaysia. pp. 1-11.. (Unpublished) (Unpublished)

Mohd Haslizam, Abdullah and Mohd Hafizu, Zakaria and Muhamad Sollehudin, Ibrahim and Ahmad Damanhuri, Mohamad Yussof and S. A., Che Ghani (2016) Ultraxtor - Low Resources High Yield Benchtop Agarwood Essential Oil Extractor. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 138-144.. ISBN 978-967-2054-04-7 (Published)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and Kian, Sheng Lim (2016) The Use of Real-Time Monitoring System Utilizing Single Fibre Bragg Grating Sensor for Composite Plate under Static Loading. In: International Conference on Environmental Technology and Management (ICETM 2016) , 19-20 August 2016 , Kuala Lumpur, Malaysia. pp. 1-13.. (Unpublished) (Unpublished)

N. M. S., Abd Malek and S. R., Mohamed and S. A., Che Ghani and W. S., Wan Harun (2015) Critical Evaluation on Structural Stiffness of Porous Cellular Structure of Cobalt Chromium Alloy. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (1). (Published)

A., Azidin and Z. A. M., Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and M. A., Omar and H., Ramli (2015) Investigation of Mechanical Properties for Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

S. A., Che Ghani and W. S., Wan Harun and M. F. F., Ab Rashid and Rasidi, Ibrahim (2015) Numerical Analysis of Internal Flow Embedded in a Cutting Tool. In: Proceedings of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. pp. 1-5.. (Published)