Browse by Author All List

A

Alam, Mohammad Khurshed and M. H., Mohammed Faozi and A. R., Yusoff and M. Z., Zainol and Z., Khalil (2022) Fault Detection for Automotive Coil Spring Using Signal Processing Analysis. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 415-426.. ISBN 978-981-19-2890-1 (Published)

Ainur Munira, Rosli and Norlida, Jamil and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and A. R., Yusoff (2021) Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 589-597.. ISBN 978-981-15-9505-9 (Published)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2019) Adjustable Valve Semi Active Suspension System for Passenger Car. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6470-6481. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. R., Yusoff and B. M., Deros and D. D. I., Daruis and E. H., Sukadarin (2019) Foot-Transmitted Vibration: Automotive Accelerator Pedal-Pad Vibration on Tarmac and Paved Road. Journal of the Society of Automotive Engineers Malaysia, 3 (1). pp. 50-62. ISSN 2550-2239. (Published)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2018) Numerical Investigation of Continuous Damping of The Semi-Active Suspension System for Passenger Car. In: The International Conference on Recent Advances in Industrial Engineering and Manufacturing (ICRAIEM 2018) , 12-13 December 2018 , Penang, Malaysia. pp. 1-11.. (Published)

A. R., Yusoff and Bagaber, Salem Abdullah and Fawzi, Zamri (2018) Sustainable machining process calculator. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted) (Submitted)

A. R., Yusoff (2016) Identifying Bifurcation Behavior during Machining Process for an Irregular Milling Tool Geometry. Measurement, 93. pp. 57-66. ISSN 0263-2241. (Published)

A. R., Yusoff and Fitriyanti, Arsyad (2015) Evaluation of Surface Roughness and Power Consumption in Machining FCD 450 Cast Iron using Coated and Uncoated Irregular Milling Tools. In: International Manufacturing Engineering Conference 2015 , 12-14 November 2015 , Kuala Lumpur. pp. 1-8., 3 (1). ISSN 2289-697X (Unpublished) (Unpublished)

A. R., Yusoff and Mohamad Syahmi, Shahrom (2014) Review of Aluminum Chip Machining Using Direct Recycling Process. Advanced Materials Research, 903. pp. 157-162. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. R., Yusoff and Mohamed Reza Zalani, Mohamed Suffian and Mohd Yusof, Taib (2011) Literature Review of Optimization Techniques for Chatter Suppression In Machining. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 47-61. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. R., Yusoff and Nafrizuan, Mat Yahya (2011) A refined differential evolution algorithm for improving the performance of optimization process. In: International Conference on Informatics Engineering and Information Science (ICIEIS 2011) , 14-16 November 2011 , Kuala Lumpur. pp. 184-194., 252 (2). ISSN 1865-0929 ISBN 978-364225452-9 (Published)

A. R., Yusoff and Z., Ghazalli and Hazami, Che Hussain (2009) Determining Optimum EDM Parameters in Drilling a Small Hole by Taguchi Method. International Journal of Manufacturing Technology and Management, 17 (4). pp. 345-352. ISSN 1368-2148. (Published)

B

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Energy and Cost Integration for Multi-Objective Optimisation in a Sustainable Turning Process. Measurement. pp. 1-35. ISSN 0263-2241. (In Press / Online First) (In Press / Online First)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Multi-responses optimization in dry turning of a stainless steel as a key factor in minimum energy. The International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 1109-1122. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Sustainable optimization of dry turning of stainless steel based on energy consumption and machining cost. Procedia CIRP, 77. pp. 397-400. ISSN 2212-8271. (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2017) Effect of Cutting Parameters on Sustainable Machining Performance of Coated Carbide Tool in Dry Turning Process of Stainless Steel 316. In: AIP Conference Proceedings: Green And Sustainable Technology: 2nd International Symposium (ISGST2017) , 10–13 January 2017 , Perak, Malaysia. pp. 1-8., 1828 (1). ISBN 978-0-7354-1496-9 (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2017) Multi-Objective Optimization of Cutting Parameters to Minimize Power Consumption in Dry Turning of Stainless Steel 316. Journal of Cleaner Production, 157. pp. 30-46. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2017) A comparative study on performance of CBN inserts when turning steel under dry and wet conditions. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012041). ISSN 1757-899X (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2016) Analysis of Dry Turning Process of AISI316 for Coated and Uncoated Insert Tools Based on Economical Method. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 683-692.. (Published)

H

Hazwan, Syafiq and A. M. N., Kamarizan and M. F., Ghazali and A. R., Yusoff (2016) Statistical Analysis of Deep Drilling Process Conditions Using Vibrations and Force Signals. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00002). ISSN 2261-236X (Published)

Hazwan, Syafiq and A. R., Yusoff and A. M. N., Kamarizan and M. F., Ghazali (2015) Statistical Analysis of Deep Drilling Processs Conditions Using Vibrations and Force Signals. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished) (Unpublished)

Hazami, Che Hussain and A. R., Yusoff (2014) Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method. Advanced Materials Research, 903. pp. 129-134. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hartini, Mustafa and A. R., Yusoff and M. Yusoff, Ismail (2012) Productivity study and line balancing of GGMG & CALICO production line. Advanced Materials Research, 576. pp. 700-704. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

K

Kamarulzaman, Mahmad Khairai and Nurul Shamime, Salleh and A. R., Yusoff (2018) Occupational noise reduction in CNC striping process. In: IOP Conference Series: Materials Science and Engineering: The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 17578981 (Published)

L

Lim, Syh Kai and Nurrina, Rosli and A. R., Yusoff (2020) Refining the composition of recycled spent lubricants mixed with alumina nanofluids for machining purpose. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 365-370.. ISBN 978-981-15-0950-6 (Published)

M

Mohd Saifuldin, Mohd Mokhtar and A. R., Yusoff (2023) Effect of Machining Parameters on Surface Quality of Aluminium Puncher for Microchannel Fabrication Using Micro Cutting Process. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 11-20.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff (2023) Experimental and Simulation Approach; Investigation Effect of Axial Feed Rate to the Cutting Force in Dimple Milling Using Ball End Mill Tool. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 33-50.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

M. F., Ishak and M. F., Zolkepli and E. M. H., Masyhur and N. Z. M., Yunus and A. S. A., Rashid and M. A., Hezmi and D. Z. A., Hasbollah and A. R., Yusoff (2022) Interrelationship between borehole lithology and electrical resistivity for geotechnical site investigation. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103279). pp. 1-9. ISSN 1474-7065. (Published)

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. N., Mohd Foudzi and Mohd Yusof, Taib and A. S., Arnizam Shah and A. R., Yusoff (2021) Monitoring energy audit for energy savings using non cost technique at electronics company. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 71-79. ISSN 2636-9575. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2020) Fast & Injurious: Reducing thermal osteonecrosis regions in the drilling of human bone with multi-objective optimization. Measurement, 152 (107835). pp. 1-15. ISSN 0263-2241. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: thermal osteonecrosis regions induced by drilling parameters. Biomedical Physics & Engineering Express, 5 (6). 065003-1. ISSN 2057-1976. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Comparison of bone temperature elevation in drilling of human, bovine and porcine bone. In: 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO , 13-14 June 2019 , Sheffield; United Kingdom. pp. 411-414., 82. ISSN 2212-8271 (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Multi-objective optimization of surgical drill bit to minimize thermal damage in bone-drilling. Applied Thermal Engineering, 157. pp. 113583-113594. ISSN 1359-4311. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: Effect of drill bit geometries on thermal osteonecrosis risk regions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (2). pp. 207-218. ISSN 0954-4119. (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2018) Heuristic design of U-shaped die cooling channel for producing ultra-high strength steel using hot press forming. The International Journal of Advanced Manufacturing Technology, 97 (9-12). pp. 4101-4114. ISSN 0268-3768 (Print); 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Mohd Faizal, Ali Akhbar and Mukhtar, Malik and A. R., Yusoff (2018) Effects of drilling parameters in numerical simulation to the bone temperature elevation. In: Advanced nanotechnology in engineering and medical sciences (ANEMS) international conference 2017 , 20-21 November 2017 , Langkawi, Malaysia. pp. 1-4., 1948 (020002). ISBN 978-0-7354-1643-7 (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2018) Effect of rake angle and feed rate on chip segmentation in machining carbon steel 1050. In: 9th International Conference on Manufacturing Science and Technology 2018 , 11 - 13 Aug 2018 , Kuala Lumpur. pp. 1-7.. (Unpublished) (Unpublished)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2018) Optimization of drilling parameters for thermal bone necrosis prevention. Technology and Health Care, 26 (4). pp. 621-632. ISSN 0928-7329 (Print); 1878-7401 (Online). (Published)

Mohd Hazwan Syafiq , Harun and M. F., Ghazali and A. R., Yusoff (2017) Analysis of Tri-axial Force and Vibration Sensors for Detection of Failure Criterion in Deep Twist Drilling Process. The International Journal of Advanced Manufacturing Technology, 89 (9-12). pp. 3535-3545. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohd Fawzi, Zamri and Lim, Syh Kai and A. R., Yusoff (2016) Experimental Validation for Hot Stamping Process by Using Taguchi Method. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Madan Varmma, Suparmaniam and A. R., Yusoff (2016) Investigation of Surface Roughness and Tool Wear Length With Varying Combination of Depth of Cut and Feed Rate of Aluminium Alloy and P20 Steel Machining. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-9., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

M. H. S., Harun and M. F., Ghazali and A. R., Yusoff (2016) Tri-axial Time-frequency Analysis for Tool Failures Detection in Deep Twist Drilling Process. Procedia CIRP, 46. pp. 508-511. ISSN 2212-8271. (Published)

Muhammad Adib , Shaharun and A. R., Yusoff (2015) Effects of Irregular Tool Geometry and Machining Process Parameters on the Wavelength Performance of Process Damping in Machining Titanium Alloy at Low Cutting Speed. The International Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2015) Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process. Advances in Materials and Processing Technologies, 1 (1-2). pp. 27-35. ISSN 2374-068X (Print), 2374-0698 (Online). (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2015) Parametric Optimization Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2591-2599. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff (2014) Bouc-Wen Model Parameter Identification for a MR Fluid Damper Using Particle Swarm Optimization. Advanced Materials Research, 903. pp. 279-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Fawzi, Zamri and Zahari, Taha and A. R., Yusoff and Mohamad Farid, Mohamad Sharif and Mohd Ali Hanafiah, Shaharudin (2014) Comparison of Cooling Performance Between High Thermal Conductivity Steel (HTCS 150) and Hot Work Tool Steel (SKD 61) Insert for Experimental Tool Using Finite Element Analysis. Advanced Materials Research, 903. pp. 163-168. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Fawzi, Zamri and A. R., Yusoff (2014) Development of hot stamping tool by using indirect hot stamping for basic bending part (u-shape). Auto Inexss (7). ISSN 1985-8434

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thickness Using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thicknesses using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2014) Optimizing Hysteresis Parameters Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10.. (Unpublished) (Unpublished)

M. H., Firdaus and A. R., Yusoff and Muhammad Hatifi, Mansor and Mohd Tarmizy, Che Kar (2014) Parametric Study of an Electromagnetic Energy Harvester. Applied Mechanics and Materials, 471. pp. 113-118. ISSN 1662-7482. (Published)

Mohamad Syahmi, Shahrom and A. R., Yusoff and Mohd Amri, Lajis (2013) Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process. Advanced Materials Research, 845. pp. 637-641. ISSN 1022-6680, ESSN: 1662-8985. (Published)

Mohamad Syahmi, Shahrom and A. R., Yusoff (2013) Experimental Cold Compression of Aluminum 6061 Chips from Different Lubricant Condition. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. p. 1.. (Published)

Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Muhammad Adib, Shaharun (2012) Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012044). ISSN 1757-899X (Published)

Muhammad Adib, Shaharun and Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Khairul Azha, Abd Jalal (2012) Performance of process damping in machining titanium alloys at low cutting speed with different helix tools. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X (Published)

M. M., Hatifi and M. F., Hassan and A. R., Yusoff (2011) Simulation Study of Cutting Tool System Using Intelligent Active Force Control. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 62-74. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N

N., Jamil and M. F., Hassan and S. K., Lim and A. R., Yusoff (2021) Predictive maintenance for rotating machinery by using vibration analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8289 -8299. ISSN 2231-8380 (online). (Published)

Noraishah, Mohamad Noor and Muhammad Nashrur Faizzi, Abdul Razak and A. R., Yusoff (2020) Finite Element Analysis of Baseplate for Failure Estimation in Light Railway Transit Fastening Systems. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 505-511.. ISBN 978-981-15-0950-6 (Published)

Nafrizuan, Mat Yahya and A. R., Yusoff and Azlyna, Senawi and Tokhi, M. Osman (2019) Dual level searching approach for solving multi objective optimisation problems using hybrid particle swarm optimisation and bats echolocation-inspired algorithms. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 45-57. ISSN 2637-0883. (Published)

Norlida, Jamil and A. R., Yusoff (2019) Effect of Machining Process Parameters on Acceleration Signal in Determining Surface Quality of Milling Process at Ductile Iron. In: Joint Conference of 4th International Manufacturing Engineering Conference (iMEC) & 5th Asia-Pacific Conference on Manufacturing System (APCOMS) , 21-22 August 2019 , Putrajaya, Malaysia. pp. 1-6.. (Unpublished) (Unpublished)

Nurul Afiqah, Zainal and A. R., Yusoff and Ajisman, Apen (2019) Integrated cooling systems and maximum power point tracking of fuzzy logic controller for improving photovoltaic performances. Measurement, 131. pp. 100-108. ISSN 0263-2241. (Published)

N., Jamil and A. R., Yusoff (2018) Kurtosis quantification of different minimal quantity lubrication effects in machining cast iron with coated and uncoated tool. In: 6th Asia International Conference On Tribology , 17 - 20 Sept 2018 , Kuching, Sarawak. pp. 1-2.. (Unpublished) (Unpublished)

Nik Nurul Husna, Muhmed Razali and A. R., Yusoff (2018) Optimisation of hybrid energy harvesting using finite element method based on vibration excitation. Progress in Industrial Ecology, an International Journal, 12 (3). pp. 284-296. ISSN 1476-8917 (Print); 1478-8764 (Online). (Published)

Norlida, Jamil and A. R., Yusoff (2016) Electromagnetic Actuator for Determining Frequency Response Functions of Dynamic Modal Testing on Milling Tool. Measurement, 82. pp. 355-366. ISSN 0263-2241. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2016) Environmental Impacts and Hazards Associated With Metal Working Fluids and Recent Advances in the Sustainable Systems: A Review. Renewable and Sustainable Energy Reviews, 60. pp. 1008-1031. ISSN 1364-0321. (Published)

Nurul Afiqah , Zainal and Ajisman, Apen and A. R., Yusoff (2016) Modelling of Photovoltaic Module Using Matlab Simulink. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment using Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (In Press / Online First) (In Press / Online First)

Norlida, Jamil and A. R., Yusoff and Muhammad Hatifi, Mansor (2013) Experimental Study of the Static Modal Analysis on Milling Machine Tool. In: International Manufacturing Engineering Conference (IMEC 2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-6.. (Unpublished) (Unpublished)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the End Milling Process for Aluminium Alloy AA6061T6 Using HSS Tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1140-1150. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the end milling process for aluminum alloy AA6061T6 using hss tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8 (1). pp. 1140-1150. ISSN 2180-1606. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Norlida, Jamil and A. R., Yusoff and M. M., Hatifi (2012) Literature Review Of Electromagnetic Actuator Force Generation For Dynamic Modal Testing Applications. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 311-319. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S

S. K., Lim and M. F., Zamri and A. R., Yusoff (2022) Structure integrity analysis on nickel-diamond blade in dicing of hard-brittle ceramic die. Procedia CIRP, 108. pp. 465-469. ISSN 2212-8271. (Published)

S., Zainal Ariffn and Efendee, A. M. and Alias, M. and Redhwan, A. A. M. and Muhamed, M. N. and A. R., Yusoff (2021) Optimization on the effect of nozzle orifice coolant supply during machining automotive material Al319. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-9., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

S. K., Lim and N. Z., Mohamad and A. R., Yusoff (2019) Experimental investigation of recycled machining coolant mixed with nanofluids based Al2O3. In: International Conference On Recent Advances In Industrial Engineering And Manufacturing (ICRAIEM 2018) , 12 - 13 Disember 2018 , Penang. pp. 1-6., 530 (012002). ISSN 17578981 (Published)

Suparmaniam, Madan Varmma and A. R., Yusoff (2019) Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 21-26. ISSN 2637-0883. (Published)

S. K., Lim and M. F., Zamri and A. R., Yusoff (2018) Numerical simulation of hot press forming process for quenchable sheet metal between nanocoolant and chilled water. In: 9th International Conference on Nanoscience & Nanotechnology (NANO-SCIETECH 2018) , 26 February - 1 March 2018 , UiTM, Shah Alam. pp. 1-2.. (Unpublished) (Unpublished)

Shahrom, Mohd Syahmi and A. R., Yusoff (2017) Cyclic extrusion compression back pressure technique for hot forging process in direct recycling of aluminium 6061 machining chip. Journal of Manufacturing Processes, 29. pp. 1-9. ISSN 1526-6125. (Published)

Suparmaniam, M. V. and A. R., Yusoff and Ajisman, Apen (2016) Development of Variable Frequency Drive for Compact Three Phase Induction Motor using Discrete Components. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 352-361.. (Published)

S. K., Lim and Azmi, W. H. and A. R., Yusoff (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/Water-Ethylene Gylcol Mixture Nanocoolant for Cooling Channel of Hot-press Forming Die Application. International Communications in Heat and Mass Transfer, 78. pp. 182-189. ISSN 0735-1933. (Published)

Suraya, Sulaiman and M. D., Azman and Fatchurrohman, Nanang and Abdul Aziz, Jaafar and A. R., Yusoff (2016) Simulation on the Effect of Bottle Wall Thickness Distribution using Blow Moulding Technique. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (012004). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

W

W., Safiei and M. M., Rahman and A. R., Yusoff and M. Y., Ali (2023) Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids. In: 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering Conference , 27-28 Oktober 2022 , Surakarta, Indonesia. pp. 21-32.. ISSN 2195-4356 (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. N., Arifin and W., Tasnim (2021) Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method. Arabian Journal for Science and Engineering, 46 (8). pp. 7699-7718. ISSN 1319-8025 (print); 2191-4281 (online). (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and Wajiha Tasnim, Urmi and Zetty Akhtar, Abd Malek (2021) Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 111-125. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. R., Radin (2020) Preparation, stability and wettability of nanofluid: a review. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). 7244 -7257. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Wan Hasbullah, Mohd Isa and Khairul Fikri, Muhammad and Ismail, Mohd Khairuddin and Ismayuzri, Ishak and A. R., Yusoff (2016) Geometrical Analysis on Cap-Shaped Coils for Power Optimization of the Vibration-Based Electromagnetic Harvesting System. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114. ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff and Muhammad Adib, Shaharun (2015) Effect of lubrication conditions to the cutting force coefficients in machining process. Advanced Materials Research, 1115. pp. 55-58. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff (2015) Integrated chatter avoidance and minimum quantity lubrication conditions for chatter vibration problem in the machining process. In: Advanced Manufacturing Processing Technology(AMPT2015) , 20-21 November 2015 , Madrid, Spain. p. 1.. (Submitted) (Submitted)

Y

Y., Mohd Syafiq and Zamzuri, Hamedon and Wan Azila, Aziz and A. R., Yusoff (2017) Prevention of Crack In Stretch Flanging Process Using Hot Stamping Technique. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257. ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Z

Zamzuri, Hamedon and Azmir, Azhari and A. R., Yusoff (2018) In-Situ Measurement of Electrode Wear During EDM Drilling using Vision System. Journal of Advanced Manufacturing Technology, 12 (1). pp. 513-524. ISSN 2289-8107. (Published)

Zainal Ariffin, Selamat and A. R., Yusoff and Mohd Ali, M. and Efendee, A. M. and M. M., Rahman (2018) Optimization of Coolant Technique Conditions for Machining A319 Aluminium Alloy Using Response Surface Method (RSM). In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (012039). ISSN 1757-899X (Published)

Zainal Ariffin, Selamat and Alias, M. and A. R., Yusoff and M. M., Rahman (2017) Experimental of surface roughness and tool wear on coolant condition technique using Aluminium alloy 319 used in automotive industries. International Journal of Engineering Research & Science (IJOER), 3 (10). pp. 51-60. ISSN 2395-6992. (Published)

Zamzuri, Hamedon and A. R., Yusoff and Azmir, Azhari and Abe, Yohei and Mori, Ken-ichiro (2016) Design of Hollow Section of High Strength Steel Sheets Join by Hemming Process for Energy Absorbtion Application. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3640-3643. ISSN 1819-6608. (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and Nornajmiah, Mohamad and A. R., Yusoff and M. M., Rahman (2016) Effect of CNC Lathe Machining Performance by Varying Coolant Nozzle Diameter. Indian Journal of Science and Technology, 9 (9). pp. 1-4. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and A. R., Yusoff and M. M., Rahman (2016) Effect of Coolant Nozzle Sizes on Turning Aluminum Alloy AL319. Indian Journal of Science and Technology, 9 (9). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zamzuri, Hamedon and Razemi, M. N. I. and Azmir, Azhari and A. R., Yusoff (2016) In-Situ Measurement Of Electrode Wear During Edm Drilling Using Vision System. In: 5th International Conference On Design And Concurrent Engineering (IDECON 2016) , 18-21 September 2016 , Langkawi, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)

Zainal Ariffin, Selamat and A. R., Yusoff and M. M., Rahman (2014) The Effect of Various Diameters Orifice Nozzle Coolant on Surface Roughness Performance in CNC Turning. Advanced Materials Research, 903. pp. 169-173. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zainal Ariffin, Selamat and Razali, M. and A. R., Yusoff and M. M., Rahman (2014) Investigation on Effect of Cutting Fluid Pressure Toward Machinability Using Stainless Steel 304 With Coated Cemented. Australian Journal of Basic and Applied Sciences, 8 (4 (Special)). pp. 695-699. ISSN 1991-8178. (Published)