Browse by Author All List

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | F | M | N | R
Number of items: 14.

A

Ahmad Nasser, Mohd Rose and Mohd Fadzil Faisae, Ab. Rashid and Nik Mohd Zuki, Nik Mohamed and Muhammad Aiman Safwan, Jubri (2021) The implementation of lean manufacturing and ergonomics in small medium enterprise – Case study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012057). ISSN 1757-8981 (Published)

Alias, Mohd and M. H. L., Adnan and Nor Bahiyah, Baba and Zainal Ariffin, Selamat and Ahmad Nasser, Mohd Rose and Saiful Bahri, Mohamed (2020) Optimization of surface roughness and tool wear on AISI 4140 using coated Ni-YSZ for CNC turning process. In: 4th International Conference on Engineering Technology, ICET 2019 , 6-7 July 2019 , Darul Iman Training Centre (DITC)Teluk Kalong, Kemaman, Terengganu. pp. 1-12., 1532 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Ahmad Nasser, Mohd Rose and N. M. Z., Nik Mohamed and M. F. F., Ab Rashid and Hafizzudin, Mohd Noor and Alias, Mohd (2019) Improving productivity using value stream mapping (VSM) - a case study. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-5.. (Unpublished) (Unpublished)

Ahmad Nasser, Mohd Rose (2015) Kerangka kerja untuk pelaksanaan sistem pembuatan lean di perusahaan kecil dan sederhana (PKS) bagi komponen automotif. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

F

Fazilah, Abdul Aziz and Nik Mohd Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2023) Introduction of AHP Decision Model for Prioritizing Critical Risk of WMSD in the Automotive Working Environment. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 425-435.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

M

M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose and N. M. Zuki, N. M. (2022) Hybrid flow shop scheduling with energy consumption in machine shop using moth flame optimization. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 77-86., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2022) Multi-objective multi-verse optimiser for integrated two-sided assembly sequence planning and line balancing. Journal of Combinatorial Optimization, 44 (1). 850 -876. ISSN 1573-2886. (Published)

Muhammad Arif, Abdullah and Ahmad Nasser, Mohd Rose and Zakri, Ghazalli and Ahmad Nasser, Mohd Rose (2019) A case study of energy efficient assembly sequence planning problem. 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 469 (012013). (Published)

M Arif, Abdullah and Mohd Fadzil Faisae, Ab Rashid and Zakri, Ghazalli and Nik Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2018) Modelling of assembly sequence planning problem using base part concept. AIP Publishing. pp. 200131-200135. ISSN 978-0-7354-1752-6. (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani and N. M. Z., Nik Mohamed and Ahmad Nasser, Mohd Rose (2014) Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization. Advanced Materials Research, 1043. pp. 65-70. ISSN 1022-6680 (print); 1662-8985 (online). (Published)

Mohd Zaidi, Sidek and Nur Adjla, Mohamad Hafizin and Ahmad Nasser, Mohd Rose and Khairul Azha, Abd Jalal (2013) Experimental Analysis on Martensite Formation of Low Carbon Steel During Rapid Cooling Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2.. (Published)

Mohd Ruzaimi, Mat Rejab and Muhamad, Mat Noor and Rahman, Md Mustafizur and Kadirgama, Kumaran and Mohd Shahrir Mohd, Sani and Ahmad Nasser, Mohd Rose and Rosli, Abu Bakar and Ahmad Syahrizan, Sulaiman (2008) Implementation of outcome based education in the faculty of mechanical engineering, universiti malaysia pahang : An experience. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished) (Unpublished)

N

N. W., Z. Abidin and N., Salim and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad Nasser, Mohd Rose and Ahmad Redza, Ahmad Mokhtar (2022) Experimental of multi-holes drilling toolpath using particle swarm optimization and CAD-CAM software on PCB. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 197-204., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)

R

Razali, Muhamad Magffierah and Kamarudin, N.H. and M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose (2019) Recent trend in mixed-model assembly line balancing optimization using soft computing approaches. Engineering Computations, 36 (2). pp. 622-645. ISSN 0264-4401. (Published)

This list was generated on Sat Oct 5 16:31:50 2024 +08.