Browse by Author All List

Ainaa Mardhiah, Sabri and Norfazillah, Talib and Zulkhairul, Abdul Karim and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani and Kunar, Sandip and Nooriskandar, Sani (2024) Physical characterization of modified palm oil with hybrid additives nanofluids. Journal of Advanced Research in Micro and Nano Engineering, 15 (1). pp. 41-51. ISSN 2756-8210. (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Shahandzir, Baharom and Ganesan, Mugilan and Norfazillah, Talib (2024) Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L. In: Springer Proceedings in Materials. Intelligent Manufacturing and Mechatronics, iM3F 2023 , 7 – 8 August , Pekan, Malaysia. pp. 199-210., 40. ISSN 2662-3161 ISBN 978-981-99-9848-7 (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Radhiyah, Abd Aziz and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2024) Tribological performance of novel modified calophyllum inophyllum nano-fluid from Pahang, Malaysia. Jurnal Tribologi, 40. pp. 1-13. ISSN 2289-7232. (Published)

Tan, Chee Wang and Amiril Sahab, Abdul Sani and Zubaidah, Zamri (2023) Parametric investigations of drying callophyllum inophyllum fruit for the oil extraction process. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 46-50. ISSN 2637-0883. (Published)

Muhammad Nur Qayyum Kamarulbahrin, Kamarulbahrin and Zubaidah, Zamri and Amiril Sahab, Abdul Sani (2023) Parametric investigations of drying roselle calyces flower. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 51-56. ISSN 2637-0883. (Published)

Ainaa Mardhiah, Sabri and Norfazillah, Talib and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani (2023) Evaluation of physicochemical and tribological performances of hBN/WS2 and hBN/TiO2 hybrid nanoparticles-MJO-based oil. Jurnal Tribologi, 37. pp. 84-97. ISSN 2289-7232. (Published)

Nurrina, Rosli and Nur Izzati Khoirunnisa, Ismail and Amiril Sahab, Abdul Sani and Afifah Nailah, Muhamad (2023) Investigation of Lubricant Oil Film Thickness on Workpiece under Minimum Quantity Lubrication Milling Process. Tribology Online, 18 (6). pp. 365-372. ISSN 1881-218X(Printed) 1881-2198 (Online). (Published)

Ainaa Mardhiah, Sabri and Norfazillah, Talib and Nur Syazwani Filzah, Mohd Saad and Amiril Sahab, Abdul Sani and Kunar, Sandip and Said, Ahmad and Haslina, Abdullah and Woon Kiow, Lee and Aslinda, Salleh (2023) Physical properties of new formulation of hybrid nanofluid-based Minimum Quantity Lubrication (MQL) from modified jatropha oil as metalworking fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences (1). pp. 1-10. ISSN 2289-7879. (Unpublished) (Unpublished)

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Chilakamarry, Chaitanya Reddy and Amiril Sahab, Abdul Sani and Reddy, Venugopal Jayarama (2022) Facile manufacture of oxide-free Cu particles coated with oleic acid by electrical discharge machining. Micromachines, 13 (6). pp. 1-10. ISSN 2072-666X. (Published)

Norfazillah, Talib and Ainaa Mardhiah, Sabri and Nor Athira, Jamaluddin and Mohamad Hafiz Akmal, Suhimi and Amiril Sahab, Abdul Sani (2022) Effect of Vegetable-Based Nanofluid Enriched with Nanoparticles as Metalworking Fluids During Orthogonal Cutting Process. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore, pp. 90-93. ISBN 978-981-16-9949-8 (Printed); 978-981-16-9949-8(Online)

Amiril Sahab, Abdul Sani and Shahandzir, Baharom and Noor Asimah, Mamat and Amirah Sakinah, Mohd Rozlan and Norfazillah, Talib (2022) Comparative evaluation of crude Tamanu oil performance as metalworking fluids. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1783-1788., 48 (Part 6). ISSN 2214-7853 (Published)

Norfazillah, Talib and UNSPECIFIED and Ainaa Mardhiah, Sabri and Haslina, Abdullah and Amiril Sahab, Abdul Sani (2022) Experimental study on physical properties of modified jatropha oilbased nanofluids for machining purposes. In: Materials Today: Proceedings. 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1831-1835., 48. ISSN 2214-7853 (Published)

Norfazillah, Talib and Nur Fatin Amira, Mohd Sukor and Ainaa Mardhiah, Sabri and Haslina, Abdullah and Amiril Sahab, Abdul Sani (2022) Experimental study on physical properties of modified jatropha oilbased nanofluids for machining purposes. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1831-1835., 48 (176050). ISSN 2214-7853 (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Puteri Humairah, Megat Ahmad Radzi and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2022) Modified Tamanu Plant-Based Oil from Pahang Malaysia as biodegradable metalworking fluids. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics & Material Forum 2022, iM3F 2022 , 20 - 20 July 2022 , Pekan, Pahang. 39 -45., 75 (149158). ISSN 2214-7853 (Published)

Alanas, Edith and Erdawati, Erdawati and Saefurahman, Ganjar and Amiril Sahab, Abdul Sani (2021) Utilization of cellulose nanocrystals (CNC) as a filler for chitosan-based films for chili peppers packaging. In: IOP Conference Series: Earth and Environmental Science, International Conference of Biomass and Bioenergy 2020 , 10-11 August 2020 , Bogor, Indonesia. pp. 1-12., 749 (012028). ISSN 1755-1307 (Published)

Amiril Sahab, Abdul Sani and Muhammad Asyraaf Rusyaidi, Abdul Rauf and Aifa Arina, Mohd Alwi and Nur Hidayah, Mohd Nizam (2021) Calophyllum inophyllum (CI) fruits kernel seed separator for biolubricant production line. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Amiril Sahab, Abdul Sani and Nor Athira, Jamaluddin and Ahmad Shahir, Jamaludin and Norfazillah, Talib (2021) Calophyllum-Inophyllum from Pahang Malaysia as Biolubricant Feedstock for Industrial Application. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 441-449., 1. ISBN 978-981-15-9505-9 (Published)

Nur Elya Haniza, Zamiruddin and Nurrina, Rosli and Amiril Sahab, Abdul Sani (2021) Experimental Study of Lubricant Oil Film Behavior on Al6061 under MQL Milling Process. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2021) , 20 September 2021 , Universiti Malaysia Pahang (Virtual). pp. 1-9.. (Unpublished) (Unpublished)

Amiril Sahab, Abdul Sani and Muhammad Nur Qayyum, Kamarulbahrin (2021) Halogen dryer for roselle tea production. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Amiril Sahab, Abdul Sani and Shahandzir, Baharom (2021) A pneumatic non-explosive quick stop device for CNC turning machine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Nur Athira, Jamaluddin and Norfazillah, Talib and Amiril Sahab, Abdul Sani (2020) Tribological Analyses of Modified Jatropha Oil with hBN and Graphene Nanoparticles as An Alternative Lubricant for Machining Process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (2). pp. 1-10. ISSN 2289-7879. (Published)

Amiril Sahab, Abdul Sani and Sousa, Fábio José Pinheiro (2020) The effect of pressure gradient and abrasive tool wear when polishing ceramic tiles. Materials Today: Proceedings, 46 (4). pp. 1770-1777. ISSN 2214-7853. (Published)

S., Sharif and A. S., Ramli and A. Y. M., Said and Z., Karim and E. A., Rahim and Amiril Sahab, Abdul Sani (2019) Effect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V. International Journal of Integrated Engineering, 11 (4). pp. 159-165. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129. pp. 347-362. ISSN 0301-679X. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and A. Z., Hishamudin (2019) Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018) , 16-17 July 2018 , Johor, Malaysia. pp. 1-8., 1150 (012045). ISSN 1742-6596 (Published)

Mona Alis, Md Yasser and Zaidi, Embong and Erween, Abd Rahim and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani (2019) Study of Ionic Liquids (AIL and PIL) Viscosity and its Functional Groups under Heat Treatment on Cutting Tool Surface Using Fourier- Transform Infrared Spectroscopy (FTIR). Materials Science Forum, 981. pp. 98-103. ISSN 1662-9752. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Hiroyuki, Sasahara (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209. pp. 947-964. ISSN 0959-6526 (Print); 1879-1786 (Online). (In Press / Online First) (In Press / Online First)

Norfazillah, Talib and Amiril Sahab, Abdul Sani and Erween, Abd Rahim and S. A., Che Ghani and Syahrullail, Samion (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19. pp. 98-106. ISSN 2289-7232. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Zaidi, Embong and Samion, Syahrullail (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X. (Published)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Amiril Sahab, Abdul Sani and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2018) Modelling of fuzzy inference system for micro milling - a preliminary study through FEM. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 445-456. ISBN 978-981-13-8323-6

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) Tribological Performance of Modified Jatropha Oil Containing Oil-Miscible Ionic Liquid for Machining Applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1976-3824. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) A Review on Ionic Liquids as Sustainable Lubricants in Manufacturing and Engineering: Recent Research, Performance, and Applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526. (Published)

Amiril Sahab, Abdul Sani (2014) Pressure gradient and geometrical variation of the abrasive blocks during the polishing process of ceramic tiles with line contact. Masters thesis, University of Kaiserslautern (Contributors, UNSPECIFIED: UNSPECIFIED).