Browse by Author All List

C

Cionita, Tezara and Mohammad Hazim, Mohamad Hamdan and Siregar, Januar Parlaungan and Fitriyana, Deni Fajar and Ramli, Junid and Wong, Lingshing and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Jehadus, Emilianus (2024) Overview of jute fibre as thermoplastic matrix polymer reinforcement. Journal of Renewable Materials, 12 (3). pp. 457-483. ISSN 2164-6325. (Published)

Cionita, Tezara and Jamiluddin, Jaafar and Wong, Ling-Shing and Siregar, Januar Parlaungan and Al Emran, Ismail and Mohamad Farid, Sies and Irawan, Agustinus Purna and Hadi, Agung Efriyo and Fitriyana, Deni Fajar and Teuku Rihayat, . (2024) A brief review on the utilization of biopolymers in the manufacturing of natural fiber composites. Journal of Engineering Science and Technology, 19 (1). 52 -66. ISSN 1823-4690. (Published)

Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)

F

Fitriyana, Deni Fajar and Irawan, Agustinus Purna and Bahatmaka, Aldias and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Muhamadin, Rilo Chandra and Cionita, Tezara and Siregar, Januar Parlaungan and Jehadus, Emilianus and Baskara, Gregorius Dimas and Laksmidewi, Dwinita and da Silva Guterres, Natalino Fonseca (2023) The effect of temperature on the hydrothermal synthesis of carbonated apatite from calcium carbonate obtained from green mussels shells. ARPN Journal of Engineering and Applied Sciences, 18 (11). pp. 1215-1224. ISSN 1819-6608. (Published)

Fitriyana, Deni Fajar and Doni Widodo, Rahmat and Kriswanto, Kriswanto and Athoillah, Ahmad and Prasetyo, Ares Yudi and Alrasyid, Mochamad Dzaki and Aripin, Muhammad Bustanul and Dimyati, Saeful and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Ismail, Rifky and Bayuseno, Athanasius Priharyoto (2022) Addition Rice Husk on the Density and Impact Strength of Non-Asbestos Brake Pad Composites Prepared by The Hand Layup Method. Jurnal Penerapan Teknologi dan Pembelajaran, 20 (1). pp. 20-28. ISSN 2527-6964. (Published)

H

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Muhammad Amin, Mohd Badari and Irawan, Agustinus Purna and Jamiluddin, Jaafar and Rihayat, Teuku and Ramli, Junid and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composites. Polymers, 14 (13). pp. 1-11. ISSN 2073-4360. (Published)

Hadi, Agung Efriyo and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Ramli, Junid and Tezara, Cionita and Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Rihayat, Teuku (2021) Application of micromechanical modelling for the evaluation of elastic moduli of hybrid woven jute–ramie reinforced unsaturated polyester composites. Polymers, 13 (15). pp. 1-11. ISSN 2073-4360. (Published)

I

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Jamiluddin, Jaafar and Taqriban, Rilo Berdin and Jehadus, Emilianus and Manalu, Janviter (2024) Influence of Post-Heat Treatment on the Characteristics of FeCrBMnSi Coating on Stainless Steel 304 Substrate Prepared by Twin Wire Arc Spray (TWAS) Method at Various Stand-off Distance. Jordan Journal of Mechanical and Industrial Engineering, 18 (2). pp. 1-11. ISSN 1995-6665. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk, Al2O3, and Fe2O3 on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk,Al2O3, and Fe2O3on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Munanda, Rafi and Nugraha, Fariz Wisda and Rusiyanto, R. and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Design, manufacturing and characterization of biodegradable bone screw from PLA Prepared by fused deposition modelling (FDM) 3D printing technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 205-215. ISSN 2289-7879. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Jamari, Jamari and Pradiptya, Putut Yoga and Muhamadin, Rilo Chandra and Nugraha, Fariz Wisda and Rusiyanto, Rusiyanto and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Investigating the effect of deacetylation temperature on the characterization of chitosan from crab shells as a candidate for organic nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 55-67. ISSN 2289-7879. (Published)

Ismail, Rifky and Cionita, Tezara and Lai, Yinling and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Bayuseno, Athanasius Priharyoto and Nugraha, Fariz Wisda and Muhamadin, Rilo Chandra and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) Characterization of PLA/PCL/green mussel shells Hydroxyapatite (HA) biocomposites prepared by chemical blending methods. Materials, 15 (8641). pp. 1-17. ISSN 1996-1944. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)

K

Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi and Fitriyana, Deni Fajar and Widodo, Rahmat Doni and Ismail, Rifky and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Nur Hidayah, Ismail (2023) A Study on Characteristics of Brake Pad Composite Materials by Varying the Composition of Epoxy, Rice Husk, Al2O3, and Fe2O3. Automotive Experiences, 6 (2). pp. 303-319. ISSN 2615-6202. (Published)

S

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Tamin, Rizal Zainuddin and Praja, Arief Kusuma Among and Dewi, Maya Puspita (2023) Challenge and awareness for implemented integrated project delivery (IPD) in indonesian projects. Buildings, 13 (262). pp. 1-13. ISSN 2075-5309. (Published)

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Praja, Arief Kusuma Among (2023) Project delivery systems : The partnering concept in integrated and non-integrated construction projects. Sustainability (Switzerland), 15 (86). pp. 1-14. ISSN 2071-1050. (Published)

T

Tezara, Cionita and Hadi, Agung Efriyo and Siregar, J. P. and Zalinawati, Muhamad and Mohammad Hazim, Mohamad Hamdan and Oumer, A. N. and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Fitriyana, Deni Fajar (2021) The effect of hybridisation on mechanical properties and water absorption behaviour of woven jute/ramie reinforced epoxy composites. Polymers, 13 (17). pp. 1-17. ISSN 2073-4360. (Published)

W

Widodo, Rahmat Doni and Rusiyanto, R. and Athoillah, A. and Setiadi, Rizki and Bahatmaka, Aldias and Darsono, Febri Budi and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Ismail, Rifky and Bayuseno, Athanasius P. and Irawan, Agustinus Purna and Guterres, N. F.D.S. (2023) Investigating the effect of molasses concentrations on the characterization of evaporation boat waste for crucible materials candidate. ARPN Journal of Engineering and Applied Sciences, 18 (12). pp. 1354-1364. ISSN 1819-6608. (Published)