Browse by Author All List

A

Aljaerani, Hatem Ahmad and M., Samykano and A. K., Pandey and K., Kadirgama and George, Mathew and R., Saidur (2022) Thermophysical properties enhancement and characterization of CuO nanoparticles enhanced HITEC molten salt for concentrated solar power applications. International Communications in Heat and Mass Transfer, 132 (105898). pp. 1-9. ISSN 0735-1933. (Published)

Adarsh Kumar, Pandey and Reji, Kumar. R and M., Samykano (2021) Solar energy: direct and indirect methods to harvest usable energy. Dye-Sensitized Solar Cells Emerging Trends and Advanced Applications. pp. 1-24. ISSN 978-0-12-818206-2. (Published)

Aljaerani, Hatem Ahmad and M., Samykano and R., Saidur and A. K., Pandey and K., Kadirgama (2021) Nanoparticles as molten salts thermophysical properties enhancer for concentrated solar power: A critical review. Journal of Energy Storage, 44 (Part A). pp. 1-20. ISSN 2352-152X. (Published)

Aljaerani, Hatem Ahmad and M., Samykano and Pandey, A. K. and K., Kadirgama and Saidur, R. (2020) Thermo-physical properties and corrosivity improvement of molten salts by use of nanoparticles for concentrated solar power applications: a critical review. Journal of Molecular Liquids, 314 (113807). pp. 1-20. ISSN 0167-7322. (Published)

A. K., Amirruddin and K., Kadirgama and M., Samykano and D., Ramasamy and M. M., Rahman and M. M., Noor (2018) Coefficient of friction and specific wear rate prediction model using response surface methodology for waste cooking oil blended lubricant. In: 7th International Conference on Design and Concurrent Engineering IDECON 7.0 , 17 - 18 September 2018 , Kuching, Sarawak. pp. 1-14.. (Published)

F

Farhana, K. and K., Kadirgama and S., Subramonian and D., Ramasamy and M., Samykano and Mahamude, A. S. F. (2023) Applications of graphene nanomaterials in energy storage—A state-of-art short review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 595 -609.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor and G., Najafi and M., Samykano and A. S. F., Mahamude (2019) Improvement in the performance of solar collectors with nanofluids - A state-of-the-art review. Nano-Structures & Nano-Objects, 18. pp. 1-21. ISSN 2352-507X. (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy and M., Samykano and G., Najafi and Nor Azwadi, Che Sidik and F., Tarlochan (2019) Significance of alumina in nanofluid technology. Journal of Thermal Analysis and Calorimetry. pp. 1-20. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

G

G., Kadirgama and A., Kumar and M., Sandhya and L., Samylingam and D., Ramasamy and K., Kadirgama and H. A., Mohammed and M., Samykano and R., Saidur (2022) Graphene nanoplatelets–cellulose nanocrystals in engine oil for automotive applications. Green Materials, Ahead of Print. pp. 1-9. ISSN 2049-1239. (Published)

I

I., Samylingam and K., Kadirgama and Aslfattahi, Navid and L., Samylingam and D., Ramasamy and W. S., Wan Harun and M., Samykano and R., Saidur (2021) Review on thermal energy storage and eutectic nitrate salt melting point. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-21., 1078 (012034). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

J

J., Kananathan and K., Rajan and M., Samykano and K., Kadirgama and K., Moorthy and M. M., Rahman (2022) Preliminary Tensile Investigation of FDM Printed PLA/Coconut Wood Composite. In: ICMER 2021: Technological Advancement in Instrumentation & Human Engineering , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 339-350., 882. ISBN 978-981-15-7309-5 (Published)

K

K., Farhana and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and M., Samykano and R., Saidur (2021) Analysis of efficiency enhancement of flat plate solar collector using crystal nano-cellulose (CNC) nanofluids. Sustainable Energy Technologies and Assessments, 45 (101049). pp. 1-16. ISSN 2213-1388. (Published)

K., Kadirgama and L., Samylingam and Aslfattahi, Navid and M., Samykano and D., Ramasamy and R., Saidur (2021) Experimental Investigation on the Optical and Stability of Aqueous Ethylene Glycol/Mxene as a Promising Nanofluid for Solar Energy Harvesting. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-10., 1062 (012022). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Kesavarma, Seluraju and E. H., Lee and M., Samykano and K., Kadirgama and M. M., Rahman and A. G. N., Sofiah (2020) Flextural properties of 3D printed Copper-Filler Polylactic Acid (Cu-PLA). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012051). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and M., Samykano (2017) Techno-economic analysis of 1 MWp grid connected solar PV plant in Malaysia. International Journal of Ambient Energy. pp. 1-10. ISSN 0143-0750 (Print); 2162-8246 (Online). (In Press / Online First) (In Press / Online First)

L

L., Sandanamsamy and J., Mogan and K., Rajan and W. S. W., Harun and I., Ishak and F. R. M., Romlay and M., Samykano and K., Kadirgama (2023) Effect of process parameter on tensile properties of FDM printed PLA. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Laghari, Imtiaz Ali and M., Samykano and A.K., Pandey and K., Kadirgama and Mishra, Yogeshwar Nath (2022) Binary composite (TiO2-Gr) based nano-enhanced organic phase change material: Effect on thermophysical properties. Journal of Energy Storage, 51 (104526). (Published)

M

M., Samykano and Kananathan, J. and K., Kadirgama and Amirruddin, Abdul Kadir and D., Ramasamy and Samylingam, L. (2021) Characterisation, performance and optimisation of nanocellulose metalworking fluid (MWF) for green machining process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9188-9207. ISSN 2180-1606. (Published)

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and M., Samykano and A., Ameer (2021) Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012016). ISSN 1757-899X (Published)

M. F. F. A., Hamidi and W. S., Wan Harun and M., Samykano and S. A., Che Ghani and Z., Ghazalli and F., Ahmad and A. B., Sulong (2017) A Review of Biocompatible Metal Injection Moulding Process Parameters for Biomedical Applications. Materials Science and Engineering: C, 78. pp. 1263-1276. ISSN 0928-4931. (Published)

P

Paul, John and A. K., Pandey and Mishra, Yogeshwar Nath and Said, Zafar and Mishra, Yogendra Kumar and Ma, Zhenjun and Jacob, Jeeja and K., Kadirgama and M., Samykano and V. V., Tyagi (2022) Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: Recent progresses, challenges, and opportunities. Renewable and Sustainable Energy Reviews, 161 (112321). pp. 1-28. ISSN 1364-0321. (Published)

Paul, John and K., Kadirgama and M., Samykano and A. K., Pandey and V. V., Tyagi (2022) A comprehensive review on thermophysical properties and solar thermal applications of organic nano composite phase change materials. Journal of Energy Storage, 45 (103415). pp. 1-32. ISSN 2352-152X. (Published)

R

Rajan, K. and Kottasamy, A. and Mogan, J. and Sandanamsamy, L. and M., Samykano and K., Kadirgama and Wan Sharuzi, Wan Harun (2023) Preliminary investigation on the tensile properties of FDM printed PLA/copper composite. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 351 -361., 882. ISSN 1876-1100 ISBN 978-981191576-5 (In Press / Online First) (In Press / Online First)

Reji, Kumar R and M., Samykano and W. K., Ngui and A.K., Pandey and Kalidasan, B and K., Kadirgama and V.V., Tyagi (2022) Investigation of thermal performance and chemical stability of graphene enhanced phase change material for thermal energy storage. Physics and Chemistry of the Earth, 128 (103250). pp. 1-7. ISSN 1474-7065. (Published)

Reji Kumar, R. and M., Samykano and Pandey, A. K. and Said, Zafar and K., Kadirgama and Tyagi, V. V. (2022) Experimental investigations on thermal properties of copper (II) oxide nanoparticles enhanced inorganic phase change materials for solar thermal energy storage applications. In: 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022 , 21-24 February 2022 , Dubai, UAE. pp. 1-6.. ISBN 978-166541801-0 (Published)

R., Reji Kumar and M., Samykano and W. K., Ngui and A. K., Pandey and B, Kalidasan and K., Kadirgama and V. V., Tyagi (2022) Investigation of thermal performance and chemical stability of graphene enhanced phase change material for thermal energy storage. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103250). pp. 1-7. ISSN 1474-7065. (Published)

Reji Kumar, R. and M., Samykano and A. K., Pandey and K., Kadirgama and Tyagi, V. V. (2022) A comparative study on thermophysical properties of functionalized and non-functionalized multi-walled carbon nano tubes (MWCNTs) enhanced salt hydrate phase change material. Solar Energy Materials and Solar Cells, 240 (111697). pp. 1-11. ISSN 0927-0248. (Published)

S

S. K., Selvamani and W. K., Ngui and K., Rajan and M., Samykano and R., Reji Kumar and Badadhe, Avinash M. (2022) Investigation of bending and compression properties on PLA-brass composite using FDM. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103251). pp. 1-8. ISSN 1474-7065. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and M., Samykano and W. S. W., Harun and G., Najafi and M., Mofijur and Mohamed, Mazlan (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: Preparation, characterization, and thermophysical properties. Sustainable Energy Technologies and Assessments, 44 (101508). pp. 1-24. ISSN 2213-1388. (Published)

S., Kesavarma and C. K., Kong and M., Samykano and K., Kadirgama and A. K., Pandey (2020) Bending properties of 3D printed coconut wood-PLA composite. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052031). ISSN 1757-8981 (Published)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M., Samykano and W. S., Wan Harun and R., Saidur (2019) Statistical approach for prediction of thermal properties of CNC and CNC-CuO nanolubricant using Response Surface Methodology (RSM). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-14., 788 (012016). ISSN 1757-899X (Published)