Browse by Author All List
 | Up a level |
Article
Mohd Ali Hanafiah, Shaharudin and Ahmad Razlan, Yusoff (2023) Using Finite Element simulation to investigate the effect of cutting edge radius on burr formation for inclined dimple milling operation. Jurnal Tribologi, 38. pp. 49-68. ISSN 2289-7232. (Published)
Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Mohd Ali Hanafiah, Shaharudin and Zahari, Taha (2017) Numerical Model of Heat Transfer Coefficient in Hot Stamping Process. Applied Mathematics & Information Sciences, 11 (2). pp. 401-406. ISSN 1935-0090 (Print); 2325-0399 (Online) . (Published)
Mohd Fawzi, Zamri and Zahari, Taha and A. R., Yusoff and Mohamad Farid, Mohamad Sharif and Mohd Ali Hanafiah, Shaharudin (2014) Comparison of Cooling Performance Between High Thermal Conductivity Steel (HTCS 150) and Hot Work Tool Steel (SKD 61) Insert for Experimental Tool Using Finite Element Analysis. Advanced Materials Research, 903. pp. 163-168. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Mohd Zairulnizam, Mohd Zawawi and Mohd Ali Hanafiah, Shaharudin and Ahmad Rosli, Abdul Manaf (2014) Influences of Varying Combination of Feed Rate and Depth of Cut to Tool Wear Rate and Surface Roughness: High Speed Machining Technique in Non-High Speed Milling Machine. Advanced Materials Research, 903. pp. 194-199. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Book Chapter
Mohd Hasnun Arif, Hassan and Zahari, Taha and Mohd Ali Hanafiah, Shaharudin and Lim, Kok Wee and Zulfika, Anuar (2018) Development of a soccer ball launching device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 591-598. ISBN 9789811087875
Zahari, Taha and Muhammad Muaz, Alim and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Mohd Ali Hanafiah, Shaharudin and M. H. A., Hassan (2018) The identification and control of a finger exoskeleton for grasping rehabilitation. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 177-182. ISBN 9789811087875
Conference or Workshop Item
Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff (2023) Experimental and Simulation Approach; Investigation Effect of Axial Feed Rate to the Cutting Force in Dimple Milling Using Ball End Mill Tool. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 33-50.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)
Lee, Helen and Syarifah Nur Hasanah, Syed Kamarudin and Ismayuzri, Ishak and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin and Mohd Ali Hanafiah, Shaharudin and Mohd Zairulnizam, Mohd Zawawi (2021) Feasibility Study of Wafer Scale Laser Assisted Thermal Imprinting of Glass Nanostructures. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 917-923.. ISBN 978-981-15-9505-9 (Published)
Syarifah Nur Hasanah, Syed Kamarudin and Lee, Helen and Ismayuzri, Ishak and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin and Mohd Ali Hanafiah, Shaharudin and Mohd Zairulnizam, Mohd Zawawi (2021) Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 669-675.. ISBN 978-981-15-9505-9 (Published)
Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Mohd Azraai, M. Razman and Mohd Ali Hanafiah, Shaharudin (2018) Match outcomes prediction of six top English Premier League clubs via machine learning technique. In: The 6th International Conference On Robotics Intelligence And Applications 2018 , 15-19 Disember 2018 , Putrajaya, Malaysia. pp. 1-10.. (Unpublished) (Unpublished)
Zahari, Taha and Jessnor Arif, Mat-Jizat and Muhammad Amirul, Abdullah and Mohamad Razali, Abdullah and Musa, Rabiu Muazu and Mohamad Fauzi, Ibrahim and Mohd Ali Hanafiah, Shaharudin (2017) Integrated multi sensors and camera video sequence application for performance monitoring in archery. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Nurul Aida, Amir Khatif and Mohamad Aliff Kamil, Awang Kecik and Mohd Ali Hanafiah, Shaharudin and A. K., Prasada Rao and Noor Mazni, Ismail (2015) The Effect of Heat Treatment on The Hardness and Impact Properties of Medium Carbon Steel. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished) (Unpublished)
Thesis
Mohd Ali Hanafiah, Shaharudin (2014) Estimation of thermal contact conductance value between boron steel blank and tool surface at different value of applied pressure in hot stamping process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).