Browse by Author All List
 | Up a level |
Article
Nelfiyanti, . and N. M. Zuki, N. M. and M. F. F., Ab Rashid (2022) Analysis of measurement and calculation of MSD complaint of chassis assembly workers using OWAS, RULA and REBA method. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). 9681 -9692. ISSN 2180-1606. (Published)
M. F. F., Ab Rashid and N. M. Zuki, N. M. and Oumer, A. N. (2022) Modelling and optimization of energy efficient assembly line balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)
Zambri, Harun and Firdaus, Mohamad Hamzah and Shuhaimi, Mansor and Abdus Samad, Mahmud and Hashimah, Hashim and Mohamed Thariq, Hameed Sultan and N. M. Zuki, N. M. and Mohd Danial, Ibrahim and Hasril, Hasini and Mohd Rashdan, Saad and Ahmad Rasdan, Ismail (2021) Covid-19 effects on students' teaching and learning perspectives in Malaysian varsities. Pertanika Journal of Social Sciences and Humanities, 29 (4). pp. 2729-2748. ISSN 0128-7702. (Published)
Azizul Qayyum, Basri and N. M. Zuki, N. M. and Nelfiyanti, Nelfiyanti and Yusrizal, Yusoof (2021) SMED Simulation in Optimising the Operating Output of Tandem Press Line in the Automotive Industry using WITNESS Software. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 8895-8906. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Nelfiyanti, . and N. M. Zuki, N. M. (2020) Quick response manufacturing and ergonomic consequences in manufacturing environment. Conf. Series: Materials Science and Engineering, 788 (1). pp. 1-10. ISSN 1757-899X. (Published)
M. F. F., Ab Rashid and A. N. M., Rose and N. M. Zuki, N. M. and F. R. M., Romlay (2019) Improved moth flame optimization algorithm to optimize cost-oriented two-sided assembly line balancing. Engineering Computations, 37 (2). pp. 638-663. ISSN 0264-4401. (Published)
Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Occupational ergonomics risk factors prioritization using integrated analytical hierarchy process (AHP) approach: a study of a local automotive component manufacturer. Human Factors & Ergonomics Journal (HFEJ), 4 (2). pp. 1-14. ISSN 2590-3705. (Published)
M. F. F., Ab Rashid and N. M. Zuki, N. M. and F. R. M., Romlay and M., Jusop (2018) Optimization of travelling salesman problem with precedence constraint using modified GA encoding. Advanced Science Letters, 24 (2). pp. 1484-1487. ISSN 1936-6612. (Published)
Najwa Wahida, Zainal Abidin and M. F. F., Ab Rashid and N. M. Zuki, N. M. (2017) A Review of Multi-holes Drilling Path Optimization Using Soft Computing Approaches. Archives of Computational Methods in Engineering. pp. 1-12. ISSN 1134-3060(print); 1886-1784(online). (In Press / Online First) (In Press / Online First)
Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) Assessing exposure to physical risk factors for work-related musculoskeletal disorders and relevant psychosocial factors among assembly workers in an automotive component assembly plant. Human Factors & Ergonomics Journal (HFEJ), 2 (1). pp. 34-51. ISSN 2590-3705. (Published)
Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. and Amri, Isfar and N. S. M., Shalahim (2017) G3-4 musculoskeletal discomforts among assembly team members performing assembly welding task. The Japanese Journal of Ergonomics, 53 (Supplement2). pp. 466-469. ISSN 1884-2844. (Published)
Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2017) Production Layout Efficiency Improvement for Armoured Vehicle Assembly Line. International Journal of Information Research and Review, 4 (3). pp. 3810-3815. ISSN 2349-9141. (Published)
M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and N. M. Zuki, N. M. and G., Najafi (2016) Experimental Investigation of Turbulent Heat Transfer by Counter and Co-Swirling Flow in a Flat Tube Fitted with Twin Twisted Tapes. International Communications in Heat and Mass Transfer, 75. pp. 295-302. ISSN 0735-1933. (Published)
M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. Advances in Smart Systems Research, 5 (1). pp. 30-38. ISSN 2050-8662. (Published)
M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2015) Optimization of Traveling Salesman Problem with Precedence Constraint using Particle Swarm Optimization. Journal of Scienctific Research & Development , 2 (13). pp. 212-216. ISSN 1115-7569. (Published)
M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2015) Simulation Study of a Vehicle Production Line for Productivity Improvement. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1283-1292. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Bastian Wibar, Momang and N. M. Zuki, N. M. (2015) Development Concept of A Portable Quality-Confirmation Inspection Device for Automotive Body Parts. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2738-2746. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
N. M. Zuki, N. M. and Mohd Kamal, Mohd Nawawi and Adam Shariff Adli, Aminuddin (2015) Hybrid Knowledge-Based System for Collaborative Green Automotive Manufacturing Management. Applied Mechanics and Materials, 752/53. pp. 1333-1338. ISSN 1662-7482. (Published)
N. M. Zuki, N. M. (2012) Decomposition of Manufacturing Processes: A Review. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 545-560. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)
K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509. (Published)
M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and K. F., Muhamad (2009) Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets. Advanced Materials Research. ISSN 1022-6680. (Published)
K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and R., Daud (2008) Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network. Jourdan Journal of Mechanical and Industrial Engineering, 2 (4). ISSN 1995-6665. (Published)
Book Chapter
Najwa Wahida, Zainal Abidin and M. F. F., Ab Rashid and N. M. Zuki, N. M. (2018) Optimization of multi-holes drilling path using particle swarm optimization. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 101-107. ISBN 9789811087875
Fazilah, Abdul Aziz and Zakri, Ghazalli and Mohd Jawad, Mohd Jamil and Awanis, Romli and N. M. Zuki, N. M. (2018) A knowledge-based ergonomics assessment system for WMSD prevention using AHP methodology. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 161-173. ISBN 9789811087875
Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) A Future Framework of Knowledge-Based Ergonomics Assessment System at Workplace in Automotive Assembly Plant. In: Advances in Social & Occupational Ergonomics. Advances in Intelligent Systems and Computing, 487 (Pt. II). Springer International Publishing, Switzerland, pp. 93-105. ISBN 978-3-319-41687-8 (Print); 978-3-319-41688-5 (Online)
Conference or Workshop Item
Nelfiyanti, Nelfiyanti and N. M. Zuki, N. M. and M. F. F., Ab Rashid and Chon, Chin Seik (2022) Ergonomic Chair Design in Minimizing MSD Chassis Assembly Workers Complaints Using Ergonomic Function Deployment (EFD). In: ICMER 2021: Technological Advancement in Instrumentation & Human Engineering , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 73-87., 882. ISBN 978-981-19-1577-2 (Published)
N. W., Z. Abidin and N., Salim and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad Nasser, Mohd Rose and Ahmad Redza, Ahmad Mokhtar (2022) Experimental of multi-holes drilling toolpath using particle swarm optimization and CAD-CAM software on PCB. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 197-204., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose and N. M. Zuki, N. M. (2022) Hybrid flow shop scheduling with energy consumption in machine shop using moth flame optimization. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 77-86., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Nelfiyanti, Nelfiyanti and N. M. Zuki, N. M. and Nurul Aqilah Jazatul, Azhar (2021) Identification of ergonomic issues among Malaysian Automotive Assembly Workers by using the Nordic Body Map Method. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 69-81.. ISBN 978-981-15-9505-9 (Published)
Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2021) Development of a Web-Based System for Assessing and Prioritizing the Critical Ergonomics Risk Factors: A Case Study in a Local Automotive Vehicle Manufacturer. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 471-484.. ISBN 978-981-15-9505-9 (Published)
Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2020) A web-based ergonomics assessment system for prioritizing critical work-related musculoskeletal disorders risk factor. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-17., 788 (012024). ISSN 1757-899X (Published)
Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and Azizul Qayyum, Basri (2019) Risks assessment at automotive manufacturing company and ergonomic working condition. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012106). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2019) Participatory Ergonomics Intervention for Exploring Risk Factors Lead to Work-Related Musculoskeletal Disorders Among Automotive Production Workers. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 278-283.. ISBN 978-981-15-0950-6 (Published)
Azizul Qayyum, Basri and N. M. Zuki, N. M. and K. A. S. H. M., Yasir and H. M., Fazi and Ahmad Fauzi, Fudzin (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012005). ISSN 1757-899X (Published)
Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2018) Assembly Line Efficiency Improvement by Using WITNESS Simulation Software. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-11., 319 (012004). ISSN 1757-899X (Published)
A. F. H., Fansuri and A. N. M., Rose and M. F. F., Ab. Rashid and N. M. Zuki, N. M. and H., Ahmad (2018) Productivity Improvement Through Line Balancing at Electronic Company - Case Study. In: IOP Conference Series: Materials Science and Engineering, The 3rd International Conference on Manufacturing, Material and Metallurgical Engineering , 17–19 March 2018 , Kuala Lumpur, Malaysia. pp. 1-10., 409 (012015). ISSN 1757-899X (Published)
A. F. H. , Fansuri and A. N. M., Rose and N. M. Zuki, N. M. and H., Ahmad (2017) The Challenges of Lean Manufacturing Implementation in Kitting Assembly. In: IOP Conference Series:International Conference of Mechanical Engineering Research (ICMER2017) , 1 - 2 August 2017 , Kuantan, Malaysia. , 257 (012069). ISSN 17578981 (Published)
Jaffrey, V. and N. M. Zuki, N. M. and A. N. M., Rose (2017) Improvement of productivity in low volume production industry layout by using witness simulation software. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 257. ISSN 17578981 (Published)
Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) Investigation on musculoskeletal discomfort and ergonomics risk factors among production team members at an automotive component assembly plant. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-11., 257 (1). ISSN 17578981 (Published)
Nurul Husna, Zakaria and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2017) Lean Manufacturing Implementation in Reducing Waste for Electronic Assembly Line. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01048). ISSN 2261-236X (Published)
Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2017) Productivity and Efficiency Improvement Using Witness Simulation and Ergonomic Study in Automotive Assembly Line. In: The Proceedings of the 47th International Conference on Computers & Industrial Engineering (CIE47) , 11-13 October 2017 , Lisbon, Portugal. pp. 1-8. (132). ISSN 2164-8689 (Published)
A. N. M., Rose and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad, H. (2017) Similarities of Lean Manufacturing Approaches Implementation in SMEs Towards The Success: Case Study in the Automotive Component Industry. In: MATEC Web of Conferences: The 9th International Unimas Stem Engineering Conference (ENCON 2016) , 26-28 October 2017 , Sarawak, Malaysia. pp. 1-6., 87 (02024). ISSN 2261-236X (Published)
Azizul Qayyum, Basri and N. M. Zuki, N. M. (2017) The study of extended single minute exchange of die (SMED) method in 1200 tonnage tandem press line for operation improvement. In: The Proceedings of the 47th International Conference on Computers & Industrial Engineering (CIE47) , 11-13 October 2017 , Lisbon, Portugal. pp. 1-7. (149). ISSN 2164-8689 (Published)
Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2016) Ergonomics study for workers at food production industry. In: 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute (MAI)Cyberjaya, Selangor. pp. 1-7., 90. ISSN 2261236X (Published)
Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. (2016) Alternative structure of new knowledge-based ergonomics risk assessment system. In: The 4th SEANES International Conference on Human Factors and Ergonomics in South East Asia , 28 November 2016 - 1 Disember 2016 , Bandung, Indonesia. pp. 1-11.. (Unpublished) (Unpublished)
N. H., Zakaria and N. M. Zuki, N. M. and A. N. M., Rose and M. F. F., Ab Rashid (2016) Lean Manufacturing Implementation in Small and Medium Industry. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES2016) , 5-7 September 2016 , York, United Kingdom. . (Unpublished) (Unpublished)
M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2016) Multi-Objective Optimisation of CNC Milling Process for Al 6061 using Modified NSGA-II. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES 2016) , 5-7 September 2016 , York, United Kingdom. pp. 1-8.. (Unpublished) (Unpublished)
M. F. F., Ab Rashid and M. M., Razali and Make, M. R. Abdullah and N. M. Zuki, N. M. and A. N. M., Rose (2016) NSGA-II Algorithm for Assembly Line Balancing with Multi-Resource Constraints. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 317-321.. ISBN 978-967-2054-04-7 (Published)
Norhidayah, M. S. and N. M. Zuki, N. M. and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2016) RULA: Postural Loading Assessment Tools for Malaysia Mining Industry. In: Proceeding of 3rd International Conference on Ergonomics & !st International Conference on Industrial Engineering (ICE & ICIE 2015) , 19-20 August 2015 , Kuala Lumpur, Malaysia. pp. 1-8.. (Published)
M. S., Norhidayah and N. M. Zuki, N. M. and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00014). ISSN 2261-236X (Published)
Adam Shariff Adli, Aminuddin and Mohd Kamal, Mohd Nawawi and N. M. Zuki, N. M. (2014) Analytic Network Process Model for Sustainable Lean and Green Manufacturing Performance Indicator. In: AIP Conf. Proc.: Statistics and Operational Research International Conference (SORIC 2013) , 3–5 December 2013 , Sarawak. pp. 32-38., 1613. ISBN 9780735412491 (Published)
Bastian Wibar, Momang and N. M. Zuki, N. M. (2014) Design of CF for Automotive Body Parts Based on Artificial Intelligent. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014) , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-7.. (Published)
N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N., Mohd Rose and Woh, Yu Ting (2014) Production Layout Improvement for Steel Fabrication Works. In: International Conference on Industrial Engineering and Applications (ICIEA 2014) , 29-30 March 2014 , Sydney, Australia. pp. 1-5.. (Published)
Mohd Kamal, Mohd Nawawi and N. M. Zuki, N. M. and Adam Shariff Adli, Aminuddin (2013) Planning and Design of a Knowledge Based System for Green Manufacturing Management. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Kuantan, Pahang, Malaysia. pp. 1-9., 50 (1). ISBN 1757-8981 (print); 1757-899X (online) (Published)
K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. and M. S. M., Sani (2008) Design A New Household Recycle Trash Bin. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished) (Unpublished)
K., Kadirgama and M. M., Noor and M. M., Rahman and N. M. Zuki, N. M. and M. R. M., Rejab and B., Mohammad (2008) Design and development of blow mould using machining optimization parameters. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished) (Unpublished)
M. M., Noor and K., Kadirgama and D., Ramasamy and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of A High Pressure Compressed Natural Gas Mixer for A 1.5 Litre CNG-Diesel Dual Engine. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished) (Unpublished)
M. M., Noor and R., Daud and K., Kadirgama and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of Turret Punch Cutting Tool Using Reverse Engineering Method. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished) (Unpublished)
K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Importance of the Pre-Requisite Subject. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished) (Unpublished)
N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2008) An Investigation into the Effect of Materials on Joining for Automotive Panel Using Tailor Welded Blanks. In: Regional Conference on Vehicle Engineering and Technology, RIVET08 , 15-17 July 2008 , Kuala Lumpur. pp. 22-26.. (Published)
K., Kadirgama and M. M., Noor and N. M. Zuki, N. M. and M. R. M., Rejab (2008) Prediction Of Cutting Force By Numerical Solution And Statistic Method In End-Milling Operation. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished) (Unpublished)
N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and M., Hafizuddin (2008) Regenerative Chatter in End Milling on Mould Aluminum Alloys. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. . (Published)
M. R. M., Rejab and N. M. Zuki, N. M. and M. M., Noor (2008) Strain Rate Effects of Polymeric Foam Cores Under Compressive Loading. In: Proceeding of Science, Technology and Social Science Conference (STSS) . pp. 267-275.. (Published)
Thesis
N. M. Zuki, N. M. (2012) The development of a hybrid knowledge-based system for designing a low volume automotive manufacturing environment. PhD thesis, University of Bradford (Contributors, UNSPECIFIED: UNSPECIFIED).