Items where Division is "Faculty of Manufacturing Engineering" and Year is 2020

Amiril Sahab, Abdul Sani and Sousa, Fábio José Pinheiro (2020) The effect of pressure gradient and abrasive tool wear when polishing ceramic tiles. Materials Today: Proceedings, 46 (4). pp. 1770-1777. ISSN 2214-7853. (Published)

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2020) Formation of Ag nanowires in the presence of tannic acid. Materials Today: Proceedings, 29 (Part 1). pp. 240-243. ISSN 2214-7853. (Published)

Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, M. Razman (2020) Automatic identification and categorize zone of RFID reading in warehouse management system. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 194-206.. ISBN 978-981-15-7309-5 (Published)

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853 (Published)

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Ibrahim, Thamir Khalil and M., Ishak and T. M., Yusof and Bagaber, Salem Abdullah (2020) Enhancing the performance of a thermo-electric generator through multi-objective optimisation of heat pipes-heat sink under natural convection. Energy Conversion and Management, 209 (112626). pp. 1-20. ISSN 0196-8904. (Published)

Elghool, Ali and F., Basrawi and Ibrahim, Thamir K. and Ibrahim, Hassan and M., Ishak and Mohd Hazwan, Yusof and Bagaber, Salem Abdullah (2020) Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection. Energy, 208 (118270). pp. 1-21. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Farah Ameelia, Mohammad and Siti Zubaidah, Ismail (2020) Designing product-service system inventory control: System requirements analysis of raw material in automotive industry. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 159-164.. ISBN 978-981-15-0950-6 (Published)

Lee, M. K. and Mohd Saberi, Mohamad and Choon, Yee Wen and Kauthar, Mohd Daud and Nurul Athirah, Nasarudin and Mohd Arfian, Ismail and Zuwairie, Ibrahim and Suhaimi, Napis and Sinnott, Richard O. (2020) Comparison of optimization-modelling methods for metabolites production in escherichia coli. Journal of integrative bioinformatics, 17 (1). pp. 1-7. ISSN 1613-4516. (Published)

Lim, Syh Kai and Nurrina, Rosli and A. R., Yusoff (2020) Refining the composition of recycled spent lubricants mixed with alumina nanofluids for machining purpose. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 365-370.. ISBN 978-981-15-0950-6 (Published)

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2020) Investigation on the Effect of Multiple Passes in Plain Waterjet Cleaning of Paint. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 537-543.. ISBN 978-981-15-0949-0 (Published)

Muhammad Nazrin Akmal, Ahmad Zawawi and Khairunisa, Muthusamy and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Budiea, Ahmed Mokhtar Albshir (2020) Mechanical properties of oil palm waste lightweight aggregate concrete with fly ash as fine aggregate replacement. Journal of Building Engineering, 27. pp. 1-20. ISSN 2352-7102. (Published)

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee (2020) Analysis of Magnetic Component Manufacturing Cost Through the Application of Time-Driven Activity-Based Costing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 74-80.. ISBN 978-981-15-0950-6 (Published)

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu and Nurul Farahin, Zamrud and Filzah Lina, Mohd Safeiee (2020) Proposing of Mahalanobis-Taguchi System and Time-Driven Activity-Based Costing on Magnetic Component of Electrical & Electronic Industry. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 108-114.. ISBN 978-981-15-0950-6 (Published)

Noraini, Mohd Razali and Mohd Nizam A., Rahman (2020) Value stream mapping – a tool to detect and reduce waste for a lean manufacturing system. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 266-271.. ISBN 978-981-15-0950-6 (Published)

Norfatihah, Mazuki and Anwar, P. P. Abdul Majeed and Nagao, Yuki and Ahmad Salihin, Samsudin (2020) Studies on ionics conduction properties of modification CMC-PVA based polymer blend electrolytes via impedance approach. Polymer Testing, 81 (106234). pp. 1-13. ISSN 0142-9418. (Published)

Nur Athira, Jamaluddin and Norfazillah, Talib and Amiril Sahab, Abdul Sani (2020) Tribological Analyses of Modified Jatropha Oil with hBN and Graphene Nanoparticles as An Alternative Lubricant for Machining Process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (2). pp. 1-10. ISSN 2289-7879. (Published)

Nurul Farahin, Zamrud and Mohd Yazid, Abu and Nik Nurharyantie, Nik Mohd Kamil and Filzah Lina, Mohd Safeiee (2020) The Impact of Capacity Cost Rate and Time Equation of Time-Driven Activity-Based Costing (TDABC) on Electric Component. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 81-87.. ISBN 978-981-15-0950-6 (Published)

Nurul Hidayah, Razak (2020) The influence of coolant on tool deterioration of uncoated carbide tools in endmilling hardened inconel 718plus nickel based superalloy. In: RITA 2018: Proceedings of the 6th International Conference on Robot Intelligence Technology and Applications , 16-18 December 2018 , Putrajaya, Malaysia. pp. 117-122., 113. ISBN 978-981-13-8322-9 (Published)

Rahman, Sam Matiur and Ali, Md. Asraf and Altwijri, Omar and Alqahtani, Mahdi and Ahmed, Nasim and Ahamed, Nizam Uddin (2020) Ensemble-based machine learning algorithms for classifying breast tissue based on electrical impedance spectroscopy. In: International Conference on Applied Human Factors and Ergonomics : AHFE 2019 , 24 - 28 July 2019 , Washington D.C., United States. pp. 260-266., 965. ISSN 2194-5357 ISBN 978-3-030-20453-2 (Print); 978-3-030-20454-9 (Online) (Published)

Umar Zakir, Abdul Hamid and Ravichandiran, Balaji and Murtadha Bazli, Tukimat and Hairi, Zamzuri and Fakhrul Razi, Ahmad Zakuan and Dilip Kumar, Limbu and Muhammad Aizzat, Zakaria (2020) Longitudinal velocity control design with error tolerance strategy for autonomous vehicle. In: RITA 2018: Proceedings of the 6th International Conference on Robot Intelligence Technology and Applications , 16-18 December 2018 , Putrajaya, Malaysia. pp. 1-11., 113. ISBN 978-981-13-8323-6 (Published)

Vivekanandan, Panneerselvam and Faiz, Mohd Turan (2020) Multi Response Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 252-264.. ISBN 978-981-13-9539-0 (Published)

Wan Farhana, W Idris and Nurul Farhana, Abu Kasim and Abu Hannifa, Abdullah and Zulsyawan, Ahmad Khusairi and Kamal, Yusoh and Zulhelmi, Ismail (2020) Smart “Sticky Note” for strain and temperature sensing using few-layer graphene from exfoliation in red spinach solution. Ceramics International, 46 (7). pp. 9176-9182. ISSN 0272-8842. (Published)

Zainal Fahmi, Zainol Abidin and M. Nafis, O. Z. (2020) Comparative study of tool path strategies in CNC machining for part with B-spline surfaces. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 564-569.. ISBN 978-981-15-0950-6 (Published)

Zulhelmi, Ismail (2020) Application of Clean & Clear ® polymer film as a substrate for flexible and highly sensitive graphene–based strain sensor. Organic Electronics, 77 (105501). pp. 1-4. ISSN 1566-1199. (Published)

Zulhelmi, Ismail (2020) Photo-Fenton-inspired deoxygenation of tea polyphenol–graphene by household bleach. Carbon Letters, 30 (4). pp. 449-456. ISSN 1976-4251. (Published)