Items where Division is "Faculty of Engineering Technology" and Year is 2014

Article

Afiza, Abdullah Suhaimi and Aziela, Latif and Rohayu, Ahmmad Romzay (2014) Application of Elaeis Guineensis Leaves in Palm Oil Mill Effluent Treatment. Indian Journal of Science and Technology, 7 (3). pp. 254-261. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Ahmad Rasdan, Ismail and Che Mohammad Nizam, Che Kamaruddin and Mohd Hanifiah, Mohd Haniff and Baba, Md Deros (2014) The Impact of Workers Productivity Under Simulated Environmental Factor by Taguchi Analysis. APCBEE Procedia, 10. pp. 263-268. ISSN 2212-6708. (Published)

Almfraji, Mohammad Amin and Almsafir, Mahmoud Khalid and Liu, Yao (2014) Economic Growth and Foreign Direct Investment Inflows: The Case of Qatar. Procedia Social and Behavioral Sciences, 109. pp. 1040-1045. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

C. K. M., Faizal and Norhazimah, Abdul Halim (2014) Kinetic Parameters for Bioethanol Production from Oil Palm Trunk Juice. International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 8 (4). pp. 328-330. ISSN 2010-3778. (Published)

Dodangeh, Javad and Sorooshian, Shahryar and Afshari, Ali Reza (2014) Linguistic Extension for Group Multicriteria Project Manager Selection. Journal of Applied Mathematics, 2014. pp. 1-8. ISSN 1110-757X (print); 1687-0042 (online). (Published)

Elham, Falatoonitoosi and Shamsuddin, Ahmed and Sorooshian, Shahryar (2014) A Multi-Criteria Framework to Evaluate Supplier's Greenness. Abstract and Applied Analysis . pp. 1-12. (Published)

Falatoonitoosi, Elham and Shamsuddin, Ahmed and Sorooshian, Shahryar (2014) A Multicriteria Framework to Evaluate Supplier's Greenness. Abstract and Applied Analysis, 2014. pp. 1-12. ISSN 1085-3375 (Print); 1687-0409 (Online). (Published)

Firdaus, Muhammad-Sukki and Siti Hawa, Abu Bakar and Abu Bakar, Munir and Siti Hajar, Mohd Yasin and Roberto, Ramirez-Iniguez and Scott, G. McMeekin and Brian, G. Stewart and Narbin, Sarmah and Tapas, Kumar Mallick and Ruzairi, Abdul Rahim and Md. Ershadul, Karim and Salman, Ahmad and Razman, Mat Tahar (2014) Feed-in tariff for Solar Photovoltaic: The Rise of Japan. Renewable Energy, 68. pp. 636-643. ISSN 0960-1481. (Published)

Hadi, Manap and M. S., Najib (2014) A DOAS System For Monitoring Of Ammonia Emission In The Agricultural Sector. Sensors and Actuators B: Chemical, 205. pp. 411-415. ISSN 0925-4005. (Published)

Ida Rizyani, Tahir (2014) Drivers Of Organizational Innovativeness Among SMEs in Malaysia Halal Industry. International Journal of Science Commerce and Humanities (IJSCH), 2 (2). pp. 119-127. ISSN 2052-6164. (Published)

Imaduddin, Abidin and Anita, Abdul Rani and Mohd. Rashid, Ab. Hamid and Yuserrie, Zainuddin (2014) University-industry collaboration, firm performance and stakeholder theory. International Journal of Contemporary Business Management (IJCBM), 1 (1). pp. 41-51. (Published)

Jolius, Gimbun and Nur Farahin, Ishak and Noor Intan Shafinas, Muhammad and Sook, Fun Pang and Mohd Arman, Abd Kadir and Hafizah, Ramli and Mohd Faried, Abdullah and Zainal, Giman and Zulhabri, Khadisah (2014) Ultrasonic Assisted Extraction Polyphenols and Antioxidant from Nigella Sativa Seed. Journal of Engineering and Technology, 5 (2). pp. 17-26. ISSN 2180-3811. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2014) A Comparative Study for Electricity Generation and Wastewater Treatment from Palm Oil Mill Effluent by Microbial Fuel Cell using Different Sizes of Electrodes. International Journal of Engineering Technology And Sciences, 1 (1). pp. 13-15. ISSN 2289-697X. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2014) An Overview on Biological Concept of Microbial Fuel Cells. International Journal of Engineering Technology And Sciences, 2 (1). pp. 1-9. ISSN 2289-697X. (Published)

Mazuina, Mohamad and Hadi, Manap (2014) An Overview of Optical Fibre Sensors for Medical Application. International Journal of Engineering Technology And Sciences (IJETS), 1 (1). pp. 9-11. ISSN 2289-697X. (Published)

Mohamad R., M. Yasin (2014) Characterization of Light Weight Composite Panels for Table Tennis Table. International Journal of Engineering Technology And Sciences (IJETS), 2 (1). pp. 48-54. ISSN 2289-697X. (Published)

Mohammed, Mohammed Adam Taheir and Wan Maseri, Wan Mohd and Ruzaini, Abdullah Arshah and Liu, Yao (2014) Parameters Reduction Comparisions. Asian Academic Research Journal of Social Sciences and Humanities, 1 (19). pp. 138-149. ISSN 2278–859X. (Published)

Mohd Ghani, Awang and Suriya Kumar, Sinnadurai and Muhammad Nubli, Abdul Wahab (2014) Enhancing Academic Excellence in a Malaysian Secondary School Via The Development of Strategic Study Orientation Skills Devices. International Journal of Science Commerce and Humanities (IJSCH). ISSN 2052-6164. (In Press / Online First) (In Press / Online First)

Mohib Reza, Kazimi and C. K. M., Faizal and Saidatul Shima, Jamari and Tahir, Shah and Mumtaz D., Naqvi (2014) Sulfonation of Polyethylene Improves Functionality for Fabricating Technical Textiles. Plastics Research Online. pp. 1-4. (Published)

Mohib Reza, Kazimi and Saidatul Shima, Jamari and C. K. M., Faizal and Tahir, Shah (2014) Characterization of Functionalized Low Density Polyethylene/Polyaniline Nano Fiber Composite. Journal of Medical and Bioengineering, 3 (4). pp. 306-310. ISSN 2301-3796. (Published)

Mohib Reza, Kazimi and Tahir, Shah and Saidatul Shima, Jamari and Iqbal, Ahmed and C. K. M., Faizal (2014) Sulfonation of Low-density Polyethylene and Its Impact on Polymer Properties. Polymer Engineering & Science, 54 (11). pp. 2522-2530. (Published)

N., Vigneswaran and Fahmi, Samsuri and Balu, Ranganathan and Padmapriya (2014) Recent Advances in Nano Patterning and Nano Imprint Lithography for Biological Applications. Procedia Engineering, 97. pp. 1387-1398. ISSN 1877-7058. (Published)

Norazura, Ahmad and Noraida, Abdul Ghani and Anton Abdulbasah, Kamil and Razman, Mat Tahar (2014) Simulating the Impact of an Increase in Patient Volume on a Government Emergency Department in Malaysia. Simulating the Impact of an Increase in Patient Volume on a Government Emergency Department in Malaysia , 63 (16). pp. 78-82. (Published)

Nurhidayah, Abdull and Azian, Hariri and N. Azreen, P. and A. M., Leman and M. Z. M., Yusof (2014) Determination of Customer Requirement for Welding Fumes Index Development in Automotive Industries by using Quality Function Deployment Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1609-1619. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ouache, Rachid and Ali, A. J. Adham (2014) Reliability Quantitative Risk Assessment in Engineering System using Fuzzy Bow-Tie. International Journal of Current Engineering and Technology, 4 (2). pp. 1117-1123. ISSN 2347-5161 (print); 2277–4106 (online). (Published)

Ouache, Rachid and Ali, A. J. Adham (2014) Reliability Quantitative Risk Assessment in Engineering System using Fuzzy Event Tree Analysis. International Journal of Current Engineering and Technology, 4 (2). pp. 1103-1109. ISSN 2347-5161 (print); 2277–4106 (online). (Published)

Pakseresht, Mahila and Sorooshian, Shahryar and Zahra, Elyasi (2014) Regressing Effect of Time Management on Burnout: Physical Education Study for Department of Youth and Sports in Alborz, Iran. International Journal of Basic Sciences & Applied Research, 3 (2). pp. 64-69. ISSN 2147-3749. (Published)

Puranjan, Mishra and Singh, Lakhveer and Zularisam, A. W. (2014) Rnase Purification from Isolate Rns. International Journal of Engineering Technology & Sciences, 1 (1). pp. 2035-2037. ISSN 2289-697X. (Published)

Qian, Long Kweh and Wen-Min, Lu and Noor Azlinna, Azizan and Wei, Kang Wang (2014) The S in Corporate Social Responsibility and Performance of the US Telecommunications Industry. Knowledge and Process Management, 21 (3). pp. 151-158. ISSN 1099-1441. (Published)

Rachid, Ouache and Ali, A. J. Adham (2014) Safety Instrumented Systems between Reliability and Fuzzy. International Journal of Information Systems and Engineering, 2 (1). pp. 173-185. ISSN 2289-2265 . (Published)

Roy, Partha and Das, Suvadra and Auddy, Runa Ghosh and Mukherjee, Arup (2014) Engineered Andrographolide Nanosystems for Smart Recovery in Hepatotoxic Conditions. International Journal of Nanomedicine, 9 (1). pp. 4723-4735. ISSN 1178-2013. (Published)

Roy, Partha and Das, Suvadra and Pal, Rajat and Auddy, Runa Ghosh and Chakraborti, Abhay Sankar and Mukherjee, Arup (2014) Engineered Silybin Nanoparticles Educe Efficient Control in Experimental Diabetes. PLoS ONE, 9 (7). pp. 1-13. ISSN 1932-6203. (Published)

Salman, Ahmad and Razman, Mat Tahar (2014) Feedback-Rich Model for Assessing Feed-In Tariff Policy. Energy Technology & Policy: An Open Access Journal, 1 (1). pp. 45-51. (Published)

Salman, Ahmad and Razman, Mat Tahar (2014) Selection of Renewable Energy Sources for Sustainable Development of Electricity Generation System using Analytic Hierarchy Process: A Case of Malaysia. Renewable Energy, 63. pp. 458-466. ISSN 0960-1481. (Published)

Shariman, Mustafa and Faturachman, Danny and Dewanto, Yoseph Arya and Muslim, Muswar (2014) Solar Cell System Design for Mechanical Cooling System on the Ferry 500 GT. International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), 2 (2). pp. 57-61. ISSN 2320-4052 (print); 2320-4060 (online). (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2014) Role of Bio-filtration in Petrochemical Wastewater Treatment using CSTR. International Journal of Engineering Technology And Sciences, 2 (1). pp. 9-12. ISSN 2289-697X. (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2014) Sustainable Bio-methane Generation from Petrochemical Wastewater using CSTR. International Journal of Engineering Technology And Sciences, 1 (1). pp. 1-4. ISSN 2289-697X. (Published)

Singh, Lakhveer and Zularisam, A. W. (2014) Enhancement of Hydrogen Production From Palm Oil Mill Effluent Via Cell Immobilisation Technique. International Journal of Energy Research, 2014. pp. 1-8. ISSN 0363-907X (print); 1099-114X (online). (Published)

Siti Hajar, A. A. and Ahmad Rasdan, Ismail and M. R., Abdul Hamid (2014) A Survey On Safety Awareness Among Quarry Workers At East Cost Malaysia. Advances in Environmental Biology, 8 (15). pp. 195-198. ISSN 1995-0756(Print); 1998-1066(Online) . (Published)

Sorooshian, Shahryar (2014) Delay-based Reliability Analysis on Construction Projects. Life Science Journal, 11 (3s). pp. 104-114. ISSN 1097-8135. (Published)

Sorooshian, Shahryar and Falatoonitoosi, Elham and Shamsuddin, Ahmed (2014) Expanded DEMATEL for Determining Cause and Effect Group in Bidirectional Relations. The Scientific World Journal, 2014. pp. 1-7. ISSN 1537-744X. (Published)

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim and Muhamad Arifpin, Mansor (2014) Mechanical Properties Of The Friction Stir Welded Dissimilar Aluminium Alloy Joints. International Journal of Mechanical and Production Engineering (IJMPE), 2 (5). pp. 1-5. ISSN 2320-2092. (Published)

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim and Reddy, Baridula Ravinder (2014) Evaluating the Strength of the Friction Stir Welded Joints at Various Rotational Speeds. Applied Mechanics and Materials, 446 - . pp. 312-315. ISSN 1662-7482. (Published)

Yuserrie, Zainuddin and Abdul Hafaz, Ngah and Ramayah, Thurasamy (2014) Modelling of Halal Warehouse Adoption Using Partial Least Squares (PLS). International Journal of Contemporary Business Management (IJCBM), 1 (1). pp. 71-86. (Published)

Book Chapter

Ranganathan, Balu and Sun, Bingfeng and Feng, Si-Shen (2014) Multifunctional Poly(D,L-Lactide-co-Glycolide)/ Montmorillonite (PLGA/MMT) Nanoparticles Decorated by Trastuzumab for Targeted Chemotherapy of Breast Cancer. In: Chemotherapeutic Engineering: Collected Papers of Si-Shen Feng - A Tribute to Shu Chien on His 82nd Birthday. Pan Stanford Publishing Pte. Ltd., Singapore, pp. 567-594. ISBN 9789814463140 (print); 9789814463157 (ebook)

Salman, Ahmad and Razman, Mat Tahar and Cheng, Jack Kie (2014) Simulating the Effect of Feed-In Tariff on Renewable Energy Penetration: A System Dynamics Approach. In: UNSPECIFIED UNSPECIFIED, pp. 717-721.

Conference or Workshop Item

Alkasasbeh, Hamzeh Taha and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar and Ioan, Pop (2014) Free Convection Boundary Layer Flow near the Lower Stagnation Point of a Solid Sphere with Convective Boundary Conditions in a Micropolar Fluid. In: Proceedings of the 3rd International Conference on Mathematical Sciences , 17-19 December 2013 , Kuala Lumpur. pp. 76-82.. (Published)

Atnaw, Samson M. and Shaharin, A. Sulaiman and Suzana, Yusup (2014) Parametric Study for Maximizing Heating Value Of Gasification Syngas. In: 4th International Conference on Environment and BioScience (ICEBS 2014) , 8-9 October 2014 , Jinju, Korea. . (Published)

Atnaw, Samson M. and Shaharin, A. Sulaiman and Japar, Abdul Rahman (2014) Study on Co-Gasification of Oil Palm Fronds and Wood. In: International Renewable and Sustainable Energy Conference (IRSEC 2014) , 17-19 October 2014 , Congress Palace Ouarzazate, Morocco. pp. 536-541.. (Published)

Azizi, Amir and Sorooshian, Shahryar (2014) Different Approaches to Overcome Uncertainties of Production Systems. In: International Conference on Mathematics, Engineering & Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Pulau Pinang. pp. 1-8.. (Published)

Irene, Wei Kiong Ting and Hooi, Hooi Lean and Qian, Long Kweh and Noor Azlinna, Azizan (2014) Managerial overconfidence and corporate financing decision: The moderating effect of government ownership. In: 16th Malaysian Finance Association Conference 2014 , 4-6 June 2014 , Kuala Lumpur. . (Published)

Lim, Qian Pink and Mohd Ridzuan, Darun (2014) Risk Assessment of Technology Change in Financial Sector. In: Proceedings of 5th Asia-Pacific Business Research Conference , 17-18 February 2014 , Kuala Lumpur. pp. 1-15.. (Published)

Mazita, Mokhtar and Noor Azlinna, Azizan and Ida Rizyani, Tahir and Shariman, Mustafa (2014) Organizational Innovativeness Among SMEs in Malaysia Halal Industry. In: Proceedings of the 1st ASEAN Regional Conference on Animal Production (1st ARCAP) & the 35th Annual Conference of Malaysian Society of Animal Production , 4-6 June 2014 , Kuching, Sarawak. pp. 49-50.. (Published)

Muhamad Arifpin, Mansor and Nik Afieza, Che Azhar and Ahmad Rasdan, Ismail (2014) Determining the Contribution of DEA Efficiency Using Shapely Value. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014) , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-4.. (Published)

Nik Afieza, Che Azhar and Ahmad Rasdan, Ismail and Muhammad Ariffin, Mansor (2014) Development of a Network DEA Model to Measure Production Line's Performance: a Case Study for Automation and Labor Combination. In: 8th Malaysian University Campus Emission Tool (MUCET) 2014 , 10-11 November 2014 , Melaka. . (Published)

Norazura, Ahmad and Noraida, Abdul Ghani and Anton Abdulbasah, Kamil and Razman, Mat Tahar (2014) Managing Resource Capacity Using Hybrid Simulation. In: International Conference on Quantitative Sciences and Its Applications (ICOQSIA 2014) , 12–14 August 2014 , Langkawi, Kedah. pp. 504-511.. (Published)

Nur Azlina, Abd Rahman and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2014) Analysis of the Perception of Occupational Accident in Mining and Quarry Sector Towards Safe and Healthy Working Environment. In: 3rd Scientific Conference on Occupational Safety and Health (SCI-Cosh) , 15-16 October 2014 , Johor Baharu. . (Unpublished) (Unpublished)

Qian, Long Kweh and Wen-Min, Lu and Mohd Hisyam, Ghazali @ Mohd Zain and Noor Azlinna, Azizan (2014) Do Islamic Banks Outperform Commercial Banks? Longitudinal Managerial and Profitability Efficiencies and Risk Management. In: 16th Malaysian Finance Association Conference 2014 , 4-6 June 2014 , Kuala Lumpur. . (Published)

Qian, Long Kweh and Wen-Min, Lu and Noor Azlinna, Azizan (2014) Doing Well by Doing Good: The S in Corporate Social Responsibility and Efficiency Performance. In: 16th Malaysian Finance Association Conference 2014 , 4-6 June 2014 , Kuala Lumpur. . (Published)

Ramaraju, Ramgopal Varma and Manikantan, Kota and Vasudeva , Rao Veeredhi and Hadi, Manap (2014) Enhancement of Heat Transfer Coefficient in an Automobile Radiator Using Multi Walled Carbon Nano Tubes (MWCNTS). In: Proceedings of the ASME 201International Mechanical Engineering Congress and Exposition , 14-20 November 2014 , Montreal, Quebec, Canada . pp. 1-9.. (Published)

Ramaraju, Ramgopal Varma and Abdullah, Ibrahim and Yaswanth, Yatappu and Muhamad Arifpin, Mansor (2014) Structural Properties Of Similar And Dissimilar Aluminum Alloy Joints By FSW. In: Proceedings of the ASME 201International Mechanical Engineering Congress and Exposition , 14-20 November 2014 , Montreal, Quebec, Canada. pp. 1-6.. (Published)

Siti Roslindar, Yaziz and Roslinazairimah, Zakaria and Noor Azlinna, Azizan and Maizah Hura, Ahmad and Agrawal, Manju and Boland, John (2014) Innovations in the ARIMA - GARCH Modeling in Forecasting Gold Price. In: Proceedings of the 10th IMT‐GT International Conference On Mathematics, Statistics And Its Applications (ICMSA 2014) , 14-16 October 2014 , Kuala Terengganu. pp. 650-658.. (Published)

Thesis

Jebunnesa (2014) Occupational English writing test for potential nurses in Kuantan Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Najah, Osman (2014) The effect of online teaching approach in enhancing strategic thinking skills for engineering students. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Undergraduates Project Papers

Ahmad Faisal, Zulkifli (2014) A study on risk management key performance indicators for developing comprehensive malaysian standard risk management performance level in construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Mohd Amerul Amin, Razali (2014) Effect of managing technical risk towards reducing cost of production in project. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad, Mohd Yusof (2014) Risk management index. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Noor Lyana Azira, Abdul Aziz (2014) Risk analysis related to operations in oil and gas plant : the challenges for quantitative and qualitative analysis. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Ong, Mei Hwei (2014) Improving production workflow processes in printing industry using simulation. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Siti Nursyafika, Othman (2014) A study on decision making conflict in manufacturing industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Syahir Amri, Musa (2014) Pipeline construction project : a study on the effectiveness of trenchless technology from project management perspective. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Tan, Yi Hua (2014) A study of demand forecasting in electronic manufacturing industry using time-series approach. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Zahidah, Jahidi (2014) Scheduling claim analysis: a comprehensive schedule related claims of contract administration for construction industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.