UMP Institutional Repository

Items where Division is "Faculty of Mechanical & Manufacturing Engineering" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | P | Q | R | S | T | V | W | Z
Number of items: 100.

A

Abdullah, Arif and M. F. F., Ab Rashid and Ponnambalam, S. G. and Zakri, Ghazalli (2019) Energy efficient modeling and optimization for assembly sequence planning using moth flame optimization. Assembly Automation, 39 (2). pp. 356-368. ISSN 0144-5154

Abu-Samah, A. and Normy Norfiza, A. Razak and Fatanah, M. Suhaimi and Azrina, Md Ralib and Ummu Kulthum, Jamaludin (2019) Probabilistic glycemic control decision support in ICU : proof of concept using bayesian network. Jurnal Teknologi (Sciences and Engineering), 81 (2). pp. 61-69. ISSN 0127-9696 (print); 2180-3722 (online)

Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro and Siti Suhaila, Sabarudin (2019) Effects of Wheel Grouser Angle of Attack on Simulated Robot Wheel Performance on Soft Sand with High Slip Condition. In: IEEE 4th International Conference on Advanced Robotics and Mechatronics (ICARM 2019), 3-5 July 2019 , Osaka University, Japan. pp. 1-6.. (Unpublished)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2019) Adjustable Valve Semi Active Suspension System for Passenger Car. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6470-6481. ISSN 1985-9325(Print); 2180-1606 (Online)

Anes, G. Mrwan and Ang, F. Chen and M. Akmal, Adzmi and M., Hafiz and K., Kamal and Mohd Fahmi, Othman and Abdul Adam, Abdullah (2019) Effect of AL2O3, SIO2 and CNT nanoparticles blend fuels on diesel engine performances and emission characteristics. In: 8th Global Conference On Global Warming, 22-25 April 2019 , Qatar University, Doha, Qatar. pp. 1-34.. (Unpublished)

Arslan, A. and Masjuki, H. H. and Quazi, M. M. and Kalam, Md. Abul and Varman, M. and Jamshaid, M. and Rahman, S. M. Ashrafur and Imran, M. and Zulfattah, Z. M. and Anwar, M. T. and Gohar, G. A. and Mandalan, S. M. and Harith, M. H. (2019) Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads. Materials Research Express, 6 (10). pp. 1-2. ISSN 2053-1591

Athirah, B. and Nurul Shahida, M. S. (2019) Occupational noise exposure among airport workers in Malaysia: an ergonomic investigation. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

B

Bagaber, Salem Salah Abdullah (2019) Energy and cost integration model for multi-objective optimisation in turning process of stainless steel 316. PhD thesis, Universiti Malaysia Pahang.

Benjunior, B. and Asnul Hadi, Ahmad and M. M., Rashidi (2019) Direct thermal method pouring temperature and holding time effect on aluminium alloy 6061 microstructure. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-4.. (Unpublished)

C

Che Ku Eddy Nizwan, Che Ku Husin and M. F., Ghazali and A. R., Yusoff (2019) Ambient suppression in vibration bump test using wavelet-based filter. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Che Wan Mohd Noor, Che Wan Othman (2019) Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends. PhD thesis, Universiti Malaysia Pahang.

Chew, Wi Kang and Muhammad Aizzat, Zakaria (2019) Rover car outdoor localisation for navigation tracking using differential global positioning system estimation. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019, 8 July 2019 , Melaka, Malaysia. pp. 535-556.. ISBN 978-981-13-9539-0

Chi Hung, Chong and Mohd Azri Hizami, Rasid (2019) Improvement of heat transfer for DC motor windings. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Chong, Chern How and Ahmad Shahrizan, Abdul Ghani (2019) Dual image fusion technique for underwater image contrast enhancement. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19), 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-6.. (Unpublished)

Chowdhury, M. A. and Debnath, U. K. and Kamruzzaman, M. and Nuruzzaman, D. M. and Mia, Md. Shahin (2019) Analysis and optimization of turned surfaces of AISI 1060 using ANOVA and regression. Tribology in Industry, 41 (1). pp. 23-32. ISSN 0354-8996

D

Darshana, Kumari Raguphaty and Shamsuddin, Baharin and Faiz, Mohd Turan (2019) Technology sharing through university industry collaboration: Innovation in Malaysian manufacturing landscape. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 24-30. ISSN 2636-9575

E

Erdiwansyah, . and M. S. M., Sani and R., Mamat and J. M., Zikri and N. F. D., Razak and Munawir, . (2019) Experimental investigation of vibrations and noise characterization for spark ignition engine. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012014). ISSN 1742-6588 (print); 1742-6596 (online)

F

Faeiz Azizi, Adnan (2019) Contour generation for mask projection stereolithography 3D printing. Masters thesis, Universiti Malaysia Pahang.

Fradinata, E. and Suthummanon, S. and Suntiamorntut, W. and M. M., Noor (2019) Compare the forecasting method of artificial neural network and support vector regression model to measure the bullwhip effect in supply chain. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4816-4834. ISSN 2289-4659 (print); 2231-8380 (online)

G

Gan, Leong Ming (2019) UMP partners with KOCEL to leverage global online learning platform. UMP News . (Unpublished)

H

H. A., Salaam and M. S., H. Jaman and Ramli, Junid (2019) Sustainability performance model: a case study of pneumatic nipple hose connector. In: International Conference on Mechanical Engineering Research (ICMER) 2019, 30 - 31 Julai 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8.. (Unpublished)

Hairul, Bakri and Mohd Adnin, Hamidi and Mohd Shukri, Yob (2019) Finite Element Analysis on critical relative slippage of bolted joint under transverse loading. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019, 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 172-173.. ISBN 978-967-2145-65-3 (online)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh (2019) A significant review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental. In: 4th International Manufacturing Engineering Conference (IMEC 2019), 21-22 August 2019 , The Everly Hotel, Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Mohd Syafiq, Sharip and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh and Farhana, Aziz (2019) A brief review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 416-422.. ISBN 978-981-15-0950-6

Hazrulzurina, Suhaimi (2019) Analysis of combustion characteristics, engine performances and exhaust emissions of long-chain alcohol-diesel fuel blends. Masters thesis, Universiti Malaysia Pahang.

I

I. M., Sollehudin and Mohamad Heerwan, Peeie (2019) The investigation on dynamic behavior of electric powered wheelchair during the obstacle avoidance. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and R. I. M., Eiman and Muhammad Izhar, Ishak and S. M., Asyraf (2019) Investigation on vehicle dynamic behaviour during emergency braking at different speed. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6161-6172. ISSN 2229-8649 (Print); 2180-1606 (Online)

Ismayuzri, Ishak and Larochelle, Pierre (2019) MotoMaker: A robot FDM platform for multi-plane and 3D lattice structure printing. Mechanics Based Design of Structures and Machines, 47 (6). pp. 703-720. ISSN 1539-7734

Ismed, Iskandar and Muchamad, Oktaviandri and R., Wangsaputra and Zamzuri, Hamedon (2019) Competing risk models in reliability systems, an Exponential distribution model with Gamma prior distribution, a Bayesian analysis approach. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 335-341.. ISBN 978-981-15-0950-6

J

J. M., Zikri and M. S. M., Sani and Erdiwansyah, . and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester biodiesel as a fuel with the additional of butanol. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 2-11., 1262 (012012). ISSN 1742-6588 (print); 1742-6596 (online)

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Salleh, M. S. and Mohd Hazim, Mohd Hamdan and Tezara, Cionita and Teuku, Rihayat (2019) Important considerations in manufacturing of natural fiber composites: a review. International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (3). pp. 647-664. ISSN 2288-6206

Jaliliantabar, Farzad and Ghobadian, B. and Najafi, G. and R., Mamat and Carlucci, Antonio Paolo (2019) Multi-objective NSGA-II optimization of a compression ignition engine parameters using biodiesel fuel and exhaust gas recirculation. Energy, 187. pp. 1-2. ISSN 0360-5442 (Print), 1873-6785 (Online)

K

K., Baarath and Muhammad Aizzat, Zakaria and Nurul Afiqah, Zainal (2019) An investigation on the effect of lateral motion on normal forces acting on each tires for nonholonomic electric vehicle: Experimental results. In: The 26th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks, 12-16 August 2019 , Gothenburg, Sweden. . (Unpublished)

Kelvin Leong, Jiun Kiat and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli and Erny Afiza, Alias (2019) Study of nozzle distance and oil flow rate effects on the droplets size of minimum quantity lubrication. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Kurniawan, Tedi and Anwar, M. A. and Oktiani, R. and Ragadhita, R. and Nandiyanto, A. B. D. and Aziz, M. (2019) Influences of solvent types on the formation of graphene in the electrochemical exfoliation method. Materials Physics and Mechanics, 42 (2019). pp. 151-157. ISSN 1605-8119

L

Leong, W. D. and Teng, S. Y. and How, B. S. and Ngan, S. L. and Lam, H. L. and Tan, C. P. and Ponnambalam, S. G. (2019) Adaptive analytical approach to lean and green operations. Journal of Cleaner Production, 235. pp. 190-209. ISSN 0959-6526 (print), 1879-1786 (online)

Lim, Sheh Hong and Matalif, Muhammad Uzair and Nurul Najihah, Mohd Nazri and Mohd Azrul Hisham, Mohd Adib (2019) Effects of blood flow pattern and cross-sectional area on hemodynamic of patient-specific cerebral aneurysm via fluid-structure interaction method: A review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Luqman Hakim, Ahmad Shah and Sonbolestan, Seyedhossein and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2019) Dissimilar friction stir welding of thick plate AA5052-AA6061 aluminum alloys: effects of material positioning and tool eccentricity. The International Journal of Advanced Manufacturing Technology, 105 (1-4). pp. 889-904. ISSN 0268-3768 (Print), 1433-3015 (Online)

M

M., Norhafana and M. M., Noor and Hagos, F. Y. and A. Aziz, Hairuddin and K., Kadirgama and D., Ramasamy and M. M., Rahman and G., Najafi (2019) Study of fuel properties test: Diesel and various blending nanoparticles based diesel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

M. F., Hassan (2019) Theory and derivation of unsymmetrical rotor equation of the foil-air bearing rotor system and its validation with experiment data. In: IOP Conference Series: Materials Science and Engineering, 6th International Conference on Applications and Design in Mechanical Engineering, 26-27 August 2019 , Pulau Pinang, Malaysia. pp. 1-5., 670 (012003). ISSN 1757-899X

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N. M., Rose (2019) A modified artificial bee colony algorithm to optimise integrated assembly sequence planning and assembly line balancing. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5905-5921. ISSN 2289-4659 (print); 2231-8380 (online)

M. N., M. Husnain and M. R. M., Akramin and Chuan, Zun Liang and K., Rozieana (2019) Statistical distribution for prediction of stress intensity factor using bootstrap s-version finite element model. In: International Conference on Mechanical Engineering Research, 30-31 July 2019 , Kuantan, Pahang. pp. 1-7.. (Unpublished)

M. N. A., Mukhtar and Hagos, F. Y. and M. M., Noor and R., Mamat and Abdul Adam, Abdullah and Abd Rashid, Abd Aziz (2019) Tri-fuel emulsion with secondary atomization attributes for greener diesel engine – a critical review. Renewable and Sustainable Energy Reviews, 111. pp. 490-506. ISSN 1364-0321

M. N. M., Salleh and M., Ishak and M. H., Aiman and M. M., Quazi and A. M., Hanafi (2019) Weld Geometry Investigation on Dissimilar Boron Steel Laser Welded for TWB Application. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7364-7374. ISSN 1985-9325(Print); 2180-1606 (Online)

M. S., Shaari and A. K., Ariffin and Akiyuki, Takahashi and M. R. M., Akramin and S., Abdullah and M. N., M. Husnain (2019) Fatigue crack growth prediction using S-version finite element method for AlSi10Mg: an additive manufacturing material. In: 11th International Conference on Numerical Analysis In Engineering (NAE 2019), 20-22 August 2019 , Bangi, Malaysia. pp. 1-12.. (Unpublished)

Mas Ayu, Hassan and Sudin, Izman and Rosdi, Daud and A., Shah and Siti Haryani, Tomadi and M. S., Dambatta (2019) Thermal oxidation promotes growth of nanocrystalline diamond on biomedical grade Co Cr mo alloy. In: 4th International Conference on Advances in Manufacturing and Materials Engineering 2019, 29 Oct-1 Nov. 2019 , Putrajaya, Malaysia. pp. 1-3.. (Unpublished)

Mas Ira Syafila, Mohd Hilmi Tan and Ahmad Fairuz, Omar and Marzaini, Rashid and Uda, Hashim (2019) VIS-NIR spectral and particles distribution of Au, Ag, Cu, Al and Ni nanoparticles synthesized in distilled water using laser ablation. Results in Physics, 14. pp. 1-12. ISSN 2211-3797

Mohamad, M. H. and M. Nafis, O. Z. (2019) Simulation program for 4th axis CNC machining in NX CAM system. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6971-6986. ISSN 2229-8649 (Print); 2180-1606 (Online)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Tezara, Cionita and Jamiluddin, Jaafar and Efriyohadi, Agung and Ramli, Junid and Ahmad, Kholil (2019) Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites. The International Journal of Advanced Manufacturing Technology, 104 (1 - 4). pp. 1075-1086. ISSN 0268-3768 (Print); 1433-3015 (Online)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Thomas, Sabu and Jacob, Maya John and Jamiluddin, Jaafar and Tezara, Cionita (2019) Mechanical performance of hybrid woven jute-roselle-reinforced polyester composites. Polymers and Polymer Composites, 27 (7). pp. 407-418. ISSN 0967-3911

Mohd Azlan, Zulkarnain and Mohamad Khadri, Shahriman and Ahmmad Shukrie, Md Yudin (2019) Drying characteristics of cocoa bean in a swirling fluidized bed dryer: an experimental study. In: UTP-UMP-UAF Symposium on energy system 2019 (SES2019), 1-2 Oct. 2019 , UMP Library. pp. 1-10.. (Unpublished)

Mohd Azrul Hisham, Mohd Adib and Khairul Shah, Affendy Yakof and Zulfikar, Anuar and Nizam, Abdullah and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2019) The cardio vascular simulator (CardioVASS) device on monitoring the physiology of blood flow circulation via angiographic image for medical trainee. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 103-111. ISSN 2289-7879

Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni and Muhamad Zuhairi, Sulaiman (2019) HPV Game: Alleviates Vaccine Hesitancy Among High School Students Through Edutainment Gaming. In: Proceedings Of The International University Carnival On E-Learning (IUCEL) 2019, 21-22 August 2019 , DeTAR Putra, Universiti Malaysia Sarawak,Kota Samarahan, Sarawak, Malaysia. pp. 212-213.. ISBN 978-967-2298-08-3

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: thermal osteonecrosis regions induced by drilling parameters. Biomedical Physics & Engineering Express, 5 (6). 065003-1. ISSN 2057-1976

Mohd Hasnun Ariff, Hassan (2019) Kuliah atas permintaan (on-demand lecture). UMP News .

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna (2019) Fatigue and harmonic analysis of a diesel engine Crankshaft using ANSYS. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 371-376.. ISBN 978-981-15-0950-6

Muhammad Aizzuddin, Abdullah (2019) Development of temperature-insensitive fibre Bragg grating based pressure transducer. Masters thesis, Universiti Malaysia Pahang.

Muhammad Arif, Abdullah (2019) Optimisation of energy efficient Assembly Sequence Planning using Moth-Flame Optimisation alghorithm. Masters thesis, Universiti Malaysia Pahang.

Muhammad Naqiuddin, Mat Salleh and M., Ishak and M. H., Aiman and Q., Zaifuddin (2019) The effect of laser surface hardening on surface hardness of mild steel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished)

N

N., Abdullah and Jaafar, Jamiluddin and Hagos, F. Y. and Azri, Alias and N. S. N., Azmi (2019) Experimental investigation of pineapple leaf fiber as biomass fuel for renewable energy resource. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2019) Comparison of crash behaviour prediction of a car crash box using initial and updated finite element model. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

N. S., Mohamed and Juliawati, Alias (2019) The influence of friction stir welding of dissimilar AZ31 and AZ91 magnesium alloys on the microstructure and tensile properties. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6675-6683. ISSN 1985-9325(Print); 2180-1606 (Online)

Nasrul Azuan, Alang and N., Ab Razak (2019) Application of ductility exhaustion based damage model to predict creep rupture time of grade 92 steel. In: IOP Conference Series: Materials Science and Engineering, 6th International Conference on Applications and Design in Mechanical Engineering, 26-27 August 2019 , Pulau Pinang, Malaysia. pp. 1-7., 670 (012001). ISSN 1757-899X

Nayak, S. K. and Mishra, P. C. and M. M., Noor (2019) Simultaneous reduction of nitric oxide and smoke opacity in TDI dual fuel engine fuelled with calophyllum-diesel blends and waste wood chip gas for modified inlet valve and injector nozzle geometry. Energy, 189 (16238). pp. 1-17. ISSN 0360-5442 (Print), 1873-6785 (Online)

Nayak, S. K. and Mishra, P. C. and M. M., Noor and Hagos, F. Y. and K., Kadirgama and R., Mamat (2019) The performance of turbocharged diesel engine with injected calophyllum inophyllum methyl ester blends and inducted babul wood gaseous fuels. Fuel, 257. pp. 1-16. ISSN 0016-2361

Nina Iwani, A. Zailaini and Siti Zubaidah, Ismail (2019) Product - Service System Inventory Control For Malaysian Palm Oil Agribusiness. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 9-16. ISSN 2636-9575

Nor Hidayati, Abdul Aziz (2019) Simulated Kalman Filter algorithms for solving optimization problems. PhD thesis, Universiti Malaysia Pahang.

Norazlianie, Sazali and A. S., Jamaludin and Mohd Rusllim, Mohamed and W. N., W. Salleh (2019) Degradation and stability of polymer: A brief review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished)

Norazlianie, Sazali and Mohd Syafiq, Sharip and Haziqatulhanis, Ibrahim and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh (2019) Dip-Coating Methods for Carbon Membrane Fabrication: Effects of Coating-Carbonization-Cycles on Hydrogen Separation Prepared from P84/NCC. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 384-389.. ISBN 978-981-15-0950-6

Norazlianie, Sazali and Mohd Syafiq, Sharip and Haziqatulhanis, Ibrahim and Wan Norharyati, Wan Salleh and Nur Izwanne, Mahyon and K., Kadirgama and Zawati, Harun and Norsuhailizah, Sazali (2019) The performance of CO2/N2 separation on P84/NCC-based tubular carbon membrane under different carbonization conditions. Malaysian Journal of Fundamental and Applied Sciences, 15 (3). pp. 447-450. ISSN 2289-5981

Norazlianie, Sazali and Mohd Syafiq, Yusoff and Ihsan Naiman, Ibrahim and Haziqatulhanis, Ibrahim and Mohd Nizar, Mhd Razali and Wan Norharyati, Wan Salleh (2019) Dip-coating methods for carbon membrane fabrication: Effects of coating-carbonization-cycles on Hydrogen separation prepared from BTDA-TDI/MDI (P-84) polyimide blends with Nanocrystalline cellulose (NCC). In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 384-389.. ISBN 978-981-15-0950-6

Norazlianie, Sazali and Ummu Kulthum, Jamaludin and W. N., W. Salleh (2019) Brief review on polymeric materials concerning degradable polymers. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Norliana, Bakar and Choo, Chin Siew and Siregar, J. P. (2019) Structural strengthening using natural fibers composite - a review. In: Energy Security And Chemical Engineering Congress 2019 (ESCHE 2019), 17-19 July 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-20.. (Unpublished)

Norlida, Jamil and A. R., Yusoff (2019) Effect of Machining Process Parameters on Acceleration Signal in Determining Surface Quality of Milling Process at Ductile Iron. In: Joint Conference of 4th International Manufacturing Engineering Conference (iMEC) & 5th Asia-Pacific Conference on Manufacturing System (APCOMS), 21-22 August 2019 , Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Norsuhailizah, Sazali and Zawati, Harun and Abdullahi, Tijjani and Norazlianie, Sazali and Mohamad Shaiful, Abdul Karim and Ahmad Syahiman, Mohd Shah (2019) A Review on Thin Layered Composite Zeolite for Water Desalination Applications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (1). pp. 132-143. ISSN 2289-7879

Nur Aidah Nabihah, Dandang (2019) Microstructures and properties of CoCrMo alloy by metal injection moulding process. Masters thesis, Universiti Malaysia Pahang.

Nur Syazwani, Mohd Noor (2019) An assessment of driving seating comfort based on natural fiber material by using digital human modelling and pressure mapping technique. Masters thesis, Universiti Malaysia Pahang.

Nurazima, Ismail and Z. M., Hafizi and Che Ku Eddy Nizwan, Che Ku Husin and S., Ali (2019) Simulation of lamb wave interactions with defects in a thin plate. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and K., Baarath and Anwar, P. P. Abdul Majeed and Umar Zakir, Abdul Hamid (2019) The vibration effects of a two in-wheel electric vehicle towards the human brain. In: 5th International Conference on Recent Advances in Automotive Engineering, 20 - 22 Ogos 2019 , Bangi Resort Hotel Malaysia. pp. 1-6.. (Unpublished)

Nurziana Kong, Johan Kong and R. A., Bakar and Lim Yi, Leang and Mohd Adnin, Hamidi (2019) The analysis of wind blade on the performance of vertical axis wind turbine (VAWT). In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

P

Pathak, Sunil and Siti Nadiah, Mohd Saffe and Khilji, Irshad Ahamad (2019) Investigations on macro-drilling by indigenously developed ECM apparatus. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019, 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 64-65.. ISBN 978-967-2145-65-3 (online)

Q

Qistina, Z. and M. H., Aiman and M., Ishak and T., Ariga (2019) Effect of Laser Surface Modification (LSM) on laser energy absorption for laser brazing. In: International Conference on Mechanical Engineering Research (ICMER) 2019, 30-31 Julai 2019 , Vistana Hotel, Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished)

Quanjin, Ma and Idris, Mat Sahat and M. R. M., Rejab and Shukur, Abu Hassan and Zhang, Bo and Merzuki, M.N.M. (2019) The energy-absorbing characteristics of filament wound hybrid carbon fiber-reinforced plastic/polylactic acid tubes with different infill pattern structures. Journal of Reinforced Plastics and Composites, 38 (23-24). pp. 1067-1088. ISSN 0731-6844 (print); 1530-7964 (online)

Quanjin, Ma and M. R. M., Rejab and Kumar, Nallapaneni Manoj and M. S., Idris (2019) Experimental assessment of the 3-axis filament winding machine performance. Results in Engineering, 2. pp. 1-3. ISSN 2590-1230

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Mohamad Nazirul Mubin, Merzuki and Shaoliang, Huang (2019) Compressive properties on the spherical-roof contoured-core with different amounts of diamond-shaped notches. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

R

Rashid, Mamunur and Norizam, Sulaiman and Mahfuzah, Mustafa and Sabira, Khatun and Bari, Bifta Sama and Hasan, Md Jahid (2019) Recent Trends and Open Challenges in EEG based Brain-Computer Interface Systems. In: 5th International Conference On Electrical, Control And Computer Engineering (INECCE2019), 29-30 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-11.. (Unpublished)

S

S. K., Nayak and B., Nayak and P. C., Mishra and M. M., Noor and S., Nanda (2019) Effects of biodiesel blends and producer gas flow on overall performance of a turbocharged direct injection dual-fuel engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-20. ISSN 1556-7036 (Print); 1556-7230 (Online)

S. M., Asyraf and Mohamad Heerwan, Peeie and I. M., Zulhilmi and I. M., Izhar (2019) Plugging brake system as a hill descend control for electric powered wheelchair: Experimental analysis. In: IEEE International Conference on Advanced Robotics and Mechatronics (ICARM 2019), 3-5 July 2019 , Toyonaka Campus, Osaka University, Japan. pp. 319-324.. ISBN 978-1-7281-0064-7

S. M., Rosdi and R., Mamat and Alias, Azri and H., Hamzah and K., Sudhakar and Gholamhassan, Najafi and Farzad, Jaliliantabar (2019) Performance and emission of turbocharger engine using gasoline and ethanol blends. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems 2019 (SES 2019), 1-2 October 2019 , Kuantan, Malaysia. pp. 1-11., 863.

Saiful Anwar, Che Ghani (2019) UMP and MUJ hosted ICAMEN conference. UMP News . (Unpublished)

Siregar, J. P. and Z. M., Hafizi and M. R. M., Rejab and Jamiluddin, Jaafar and Mohammad Hazim, Mohamad Hamdan and Bachtiar, Dandi and Tezara, C. and S. M., Sapuan (2019) Vibration analysis of hybrid-reinforced unsaturated polyester composites. In: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication and Applications. Elsevier, Amsterdam, Netherlands, pp. 489-514. ISBN 978-0-12-816129-6

Siregar, Januar Parlaungan and Jaafar, Jamiluddin and Mat Rejab, Mohd. Ruzaimi and Tezara, C. and Choo, Chee Jie and Bachtiar, Dandi and Asmara, Y. P. (2019) The effect of maleic anhydride polyethylene on mechanical properties of pineapple leaf fibre reinforced polylactic acid composites. International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (1). pp. 101-112. ISSN 2288-6206

Siti Suhaila, Sabarudin and Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro (2019) Effect of Grouser Angle of Attack on Performance of Adjustable Robot Wheel Assistive Grouser. In: Joint Conference of 4th International Manufacturing Engineering Conference (iMEC) & 5th Asia-Pacific Conference on Manufacturing System (APCOMS), 21-22 August 2019 , Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Subhaa, R. and Jawahar, N. and Ponnambalam, S. G. (2019) An improved design for cellular manufacturing system associating scheduling decisions. Sadhana, 44 (7). pp. 1-23. ISSN 0256-2499 (Print); 0973-7677 (Online)

T

Tan, Qing Foong and Siti Zubaidah, Ismail (2019) Design, fabrication, and analysis of a smart mower. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 17-23. ISSN 2636-9575

Tasiransurini, Ab Rahman (2019) Finite impulse response optimizers for solving optimization problems. PhD thesis, Universiti Malaysia Pahang.

V

Vorathin, E. and Z. M., Hafizi and N., Ismail and M., Loman and A. M., Aizzuddin and K. S., Lim and H., Ahmad (2019) FBG Water-Level Transducer Based on PVC-Cantilever and Rubber-Diaphragm Structure. IEEE Sensors Journal, 19 (17). pp. 7407-7414. ISSN 1530-437X

W

Wan Mohd Azlan, Wan Mohd Nowalid (2019) Integration chatter avoidance and minimum quantity lubrication condition in machining process. Masters thesis, Universiti Malaysia Pahang.

Z

Zulhilmi, I. M. and Mohamad Heerwan, Peeie and Asyraf, S. M. and Ishak, I. M. (2019) Experimental study on effect of the emergency braking without anti-lock braking system to the vehicle dynamics behaviour. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Zulkifli, Ahmad@Manap and Mohd Najeb, Jamaludin and Ummu Kulthum, Jamaludin (2019) Physical fatigue prediction based on heart rate variability (HRV) features in time and frequency domains using artificial neural networks model during exercise. In: 6th Movement, Health & Exercise Conference and 12th International Sports Science Conference, 30 September - 2 October 2019 , Kuching, Sarawak, Malaysia. pp. 1-6.. (Unpublished)

This list was generated on Wed Mar 3 01:20:50 2021 +08.