Browse by ID Staff

A

Amirul Ashraf, Makhtar and Nurul Hidayah, Razak and Zhang, Cheng (2020) Tool deterioration of stainless steel 316 in wet milling operation using carbide tool. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 590-595.. ISBN 978-981-15-0950-6

J

Jamaludin, Ahmad Shahir and Razak, N. H. and Ibrahim, Ahmad Najmuddin and Osman Zahid, Muhammed Nafis and Rosli, Nurrina and Yusoff, A. R. and Amiril, S. A.S. and Razali, Mohd Nizar Mhd (2019) Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material. , [Research Report: Research Report] (Unpublished)

N

Nur Farziana, Husein and Nurul Hidayah, Razak (2021) Tool deterioration of 316 stainless steel in dry down-milling using carbide insert. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 911-915., 48 (4). ISSN 2214-7853

Nurul Hidayah, Razak (2017) Modes and progression of tool deterioration and their effects on cutting force during end milling of 718plus Ni-based superalloy using cemented WC-Co tools. PhD thesis, Auckland University of Technology (Contributors, Thesis advisor: Zhan, Chen).

Nurul Hidayah, Razak (2020) The influence of coolant on tool deterioration of uncoated carbide tools in endmilling hardened inconel 718plus nickel based superalloy. In: RITA 2018: Proceedings of the 6th International Conference on Robot Intelligence Technology and Applications , 16-18 December 2018 , Putrajaya, Malaysia. pp. 117-122., 113. ISBN 978-981-13-8322-9

Nurul Hidayah, Razak and M. M., Rahman and K., Kadirgama (2012) Response surface design model to predict surface roughness when machining hastelloy C-2000 using uncoated carbide insert. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012022). ISSN 1757-899X

Nurul Hidayah, Razak and Zhan, W. Chen and Timotius, Pasang (2017) Effects of Increasing Feed Rate on Tool Deterioration and Cutting Force during End Milling of 718Plus Superalloy Using Cemented Tungsten Carbide Tool. Metals, 7 (10). pp. 1-14. ISSN 2075-4701. (Published)