Browse by ID Staff

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: A | F | J | L | M | N | R | S | T | Y | Z
Number of items: 30.

A

Alsharafi, Ashraf Khaled and Muhammed Nafis, Osman Zahid (2023) Investigation on a vision-based approch for smart pothole detection using deep learning based on fast CNN. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 87-99. ISSN 2637-0883. (Published)

F

Faisal, Jusoh and M. Nafis, O. Z. (2018) Ergonomics risk assessment among support staff in Universiti Malaysia Pahang. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012059). ISSN 1757-899X

J

Jagathesvaran, Veeramony and M. Nafis, O. Z. (2022) A customizable controller for 3 axis modular CNC machine. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 55-62. ISSN 2636-9575. (Published)

Jamaludin, Ahmad Shahir and Razak, N. H. and Ibrahim, Ahmad Najmuddin and Osman Zahid, Muhammed Nafis and Rosli, Nurrina and Yusoff, A. R. and Amiril, S. A.S. and Razali, Mohd Nizar Mhd (2019) Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material. , [Research Report: Research Report] (Unpublished)

L

Loh, Jit Hao and M. Nafis, O. Z. (2022) A study on obstacle detection for IoT based automated guided vehicle (AGV). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 30-41. ISSN 2637-0883. (Published)

M

M. Nafis, O. Z. (2014) Computer Numerical controlled (CNC) machine for rapid manufacturing processes. PhD thesis, Loughborough University (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Nafis, O. Z. and Case, Keith and Watts, D. M. (2015) Cutting Orientations for Non-Complex Parts in 4th Axis Machining. In: International Manufacturing Engineering Conference 2015 . pp. 1-7.. (Unpublished)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Cutting Tools in Finishing Operations for CNC Rapid Manufacturing Processes: Simulation Studies. In: Advances in Manufacturing Technology XXVIII: Proceedings of the 12 th International Conference on Manufacturing Research (ICMR2014) , 9-11 September 2014 , Southampton Solent University. pp. 163-168.. ISBN 978-0-9926958-4-2

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2015) End Mill Tools Integration in CNC Machining for Rapid Manufacturing Processes: Simulation Studies. Production & Manufacturing Research, 3 (1). pp. 274-288. ISSN 2169-3277. (Published)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Optimization of Roughing Operations in CNC Machining for Rapid Manufacturing Processes. Production & Manufacturing Research, 2 (1). pp. 519-529. ISSN 2169-3277. (Published)

M. Nafis, O. Z. and Mohamad Hafiz, Mohamad (2018) Development of machining simulation application using visual basic programming in NX CAM system environment. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 73-74.. ISBN 9789672145202

M. Nafis, O. Z. and Nafrizuan, Mat Yahya and Munira, Ali and Kartina, Johan (2012) Review on CNC-rapid prototyping. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012032). ISSN 1757-899X

Mohamad, Hafiz and M. Nafis, O. Z. (2019) Investigation of the correlation between radial depth of cut (RDOC) and axial depth of cut (ADOC) using NX CAM system: simulation studies. In: Engineering Applications Of Artificial Intelligence Conference 2018 (EAAIC 2018) , 2-6 December 2018 , Sutera Harbour Resort, Sabah, Malaysia. pp. 1-6., 255. ISSN 2261-236X

Mohamad, M. H. and M. Nafis, O. Z. (2019) Simulation program for 4th axis CNC machining in NX CAM system. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6971-6986. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohamad Hafiz, Mohamad and M. Nafis, O. Z. (2018) Investigation of roughing machining simulation by using visual basic programming in NX CAM system. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981

Muhammed Nafis, Osman Zahid and Muhammad Zulhilmi, Shamsul Amran (2023) Optimization of the Automotive Manufacturing Plant Using Systematic Layout Planning (SLP) with Modular Layout. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 401-410.. ISSN 2195-4356 ISBN 978-981-99-1244-5

N

Nafrizuan, Mat Yahya and M. Nafis, O. Z. (2016) Application of adaptive bats sonar algorithm for solving a single objective of practical business optimisation problem PROBLEM. In: The 4th International Conference on Artificial Intelligence and Computer Science (AICS2016) , 28 - 29 November 2016 , Langkawi, Malaysia. pp. 84-96.. ISBN 978-967-11768-3-2

Nafrizuan, Mat Yahya and M. Nafis, O. Z. (2018) Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company. In: 3th International Manufacturing Engineering Conference 2017 (IMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (012036).

R

Rabiatul Syuhada, Hasan and Muhammed Nafis, Osman Zahid (2022) Implementation of lean tools as waste assessment method in a coil spring manufacturing. In: The 4th International Conference on Engineering and Technology for Sustainable Development (4th ICET4SD 2021) . pp. 1-13.. (Submitted)

S

Siti Sarah, Abdul Manan and Law, Ping Chien and Muhammed Nafis, Osman Zahid (2023) A simulation of insertion and retention forces in cantilever hook snap-fit joint. In: IET Conference Proceedings. IET Conference Proceedings; 2022 Engineering Technology International Conference, ETIC 2022 , 07 - 08 September 2022 , Pahang, Virtual. 57 -62., 2022 (22). ISSN 2732-4494 ISBN 978-1-83953-782-0

Siti Sarah, Abdul Manan and Muhammed Nafis, Osman Zahid (2023) A parametric study of insertion and retention forces in cantilever hook. Journal of Mechanical Engineering and Sciences (JMES), 17 (1). 9360 -9369. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

T

Thor, Wei Soon and M. Nafis, O. Z. (2022) Investigation of accuracy and response time in GPS-based car mileage monitoring device. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 42-49. ISSN 2637-0883. (Published)

Y

Yusoff, A. R. and Azmi, W. H. and Hamedon, Zamzuri B. and Saptaji, Kushendarsyah and Osman Zahid, Muhammed Nafis and Shaharudin, Mohd Ali Hanafiah (2018) Characterization of nanocoolant for improving cooling channel design in hot press forming. , [Research Report: Research Report] (Unpublished)

Yusoff, A. R. and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Che Ghani, S. A. and Osman Zahid, Muhammed Nafis (2019) Suppression of chatter in high speed milling using microcontroller based speed controller by spindle speed variation method. , [Research Report: Research Report] (Unpublished)

Yusoff, A. R. and Yahya, Nafrizuan Mat and Hamedon, Zamzuri B. and Yusoff, Wan Azhar and Shaharudin, Mohd Ali Hanafiah and Osman Zahid, Muhammed Nafis Prototype development of optimum irregular milling tools for chatter supression in machining automotive product. , [Research Report: Research Report] (Unpublished)

Yusoff, A. R. and Yusoff, Wan Azhar and Azmi, W. H. and Shaharudin, Mohd Ali Hanafiah and Osman Zahid, Muhammed Nafis and Hamedon, Zamzuri B. Characterization of thermal conductivity and viscosity of alumina nanocoolant with ethylene-glycerol based fluid for quenching process. , [Research Report: Research Report] (Unpublished)

Z

Z. F. Z., Abidin and T., Jing Hung and M. Nafis, O. Z. (2019) Portable non-contact surface roughness measuring device. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012074). ISSN 1757-899X

Zainal Fahmi, Zainol Abidin and M. Nafis, O. Z. (2020) Comparative study of tool path strategies in CNC machining for part with B-spline surfaces. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 564-569.. ISBN 978-981-15-0950-6

Zainal Fahmi, Zainol Abidin and M. Nafis, O. Z. (2018) Real time object customization in cad software via visual basic programming. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 91-92.. ISBN 9789672145202

Zamzuri, Hamedon and M. Nafis, O. Z. and Z., Ghazalli and M. M., Noor (2008) Design, Fabrication and Testing of New Invented Spring Sickle Pole "ZappItĀ®" for Palm Harvesting. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

This list was generated on Thu Mar 28 23:02:28 2024 +08.