Browse by ID Staff

A

A. F. H., Fansuri and A. N. M., Rose and M. F. F., Ab. Rashid and N. M. Zuki, N. M. and H., Ahmad (2018) Productivity Improvement Through Line Balancing at Electronic Company - Case Study. In: IOP Conference Series: Materials Science and Engineering, The 3rd International Conference on Manufacturing, Material and Metallurgical Engineering , 17–19 March 2018 , Kuala Lumpur, Malaysia. pp. 1-10., 409 (012015). ISSN 1757-899X

A. F. H. , Fansuri and A. N. M., Rose and N. M. Zuki, N. M. and H., Ahmad (2017) The Challenges of Lean Manufacturing Implementation in Kitting Assembly. In: IOP Conference Series:International Conference of Mechanical Engineering Research (ICMER2017) , 1 - 2 August 2017 , Kuantan, Malaysia. , 257 (012069). ISSN 17578981

A. N. M., Rose and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2008) Polypropylene Reinforced With Recycle Polyethylene Terephthalate As An Alternative Material For New Plastic Product. In: 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. pp. 1-5..

A. N. M., Rose and B., Md. Deros and M. N., Ab. Rahman (2013) Lean manufacturing perceptions and actual practice among Malaysian SME's in automotive industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (1). pp. 820-829. ISSN 2180-1606. (Published)

A. N. M., Rose and B. M., Deros and M. N. A., Rahman (2014) Critical success factors for implementing lean manufacturing in Malaysian automotive industry. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1191-1200. ISSN 2040-7459. (Published)

A. N. M., Rose and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad, H. (2017) Similarities of Lean Manufacturing Approaches Implementation in SMEs Towards The Success: Case Study in the Automotive Component Industry. In: MATEC Web of Conferences: The 9th International Unimas Stem Engineering Conference (ENCON 2016) , 26-28 October 2017 , Sarawak, Malaysia. pp. 1-6., 87 (02024). ISSN 2261-236X

Ab Rashid, Mohd Fadzil Faisae and Razman, Mat Tahar and Nik Mohamed, Nik Mohd Zuki and Rose, Ahmad Nasser Mohd and Baharom, Mohamad Zairi (2017) Modelling and optimization of assembly line balancing with multi-resource constraints. , [Research Report: Research Report] (Unpublished)

Abdullah, Nasser and Hujainah, Fadhl and Al-Sewari, Abdulrahman A. and Kamal Z., Zamli (2020) An Improved Jaya Algorithm-Based Strategy for T-Way Test Suite Generation. In: Emerging Trends in Intelligent Computing and Informatics. IRICT 2019 , 22-23 September 2019 , Johor Bahru, Johor, Malaysia. pp. 352-361., 1073. ISBN 978-3-030-33582-3

Abdullah, Nasser and Hujainah, Fadhl and Alsewari, Abdulrahman A. and Kamal Z., Zamli (2016) A Unified Strategy for Sequence and Sequence-less T-way Test Suite Generation. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 72-79.. ISBN 978-967-2054-04-7

Abdullah, Nasser and Kamal Z., Zamli (2018) Comparative Study between Flower Pollination Algorithm and Cuckoo Search Algorithm for t-way Test Data Generation. Advanced Science Letters, 24 (10). pp. 7465-7469. ISSN 1936-6612. (Published)

Abdullah, Nasser and Kamal Z., Zamli (2018) Comparative Study of Adaptive Elitism and Mutation Operators in Flower Pollination Algorithm for Combinatorial Testing Problem. Advanced Science Letters, 24 (10). pp. 7470-7475. ISSN 1936-6612. (Published)

Abdullah, Nasser and Kamal Z., Zamli (2019) A new variable strength t-way strategy based on the cuckoo search algorithm. In: Intelligent and Interactive Computing: Proceedings of IIC 2018 , 8-9 August 2018 , Universiti Teknikal Malaysia Melaka (UTeM). pp. 193-203., 67. ISBN 978-981-13-6030-5

Abdullah, Nasser and Kamal Z., Zamli and Alsewari, Abdulrahman A. and Ahmed, Bestoun S. (2018) An elitist-flower pollination-based strategy for constructing sequence and sequence-less t-way test suite. International Journal of Bio-Inspired Computation, 12 (2). pp. 115-127. ISSN 1758-0366. (Published)

Abdullah, Nasser and Kamal Z., Zamli and B. S., Ahmed (2019) Dynamic solution probability acceptance within the flower pollination algorithm for combinatorial t-way test suite generation. In: Intelligent and Interactive Computing: Proceedings of IIC 2018 , 8-9 August 2018 , Universiti Teknikal Malaysia Melaka (UTeM). pp. 3-11., 67. ISBN 978-981-13-6030-5

Ahmad Nasser, Mohd Rose (2015) Kerangka kerja untuk pelaksanaan sistem pembuatan lean di perusahaan kecil dan sederhana (PKS) bagi komponen automotif. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Nasser, Mohd Rose and Mohd Fadzil Faisae, Ab. Rashid and Nik Mohd Zuki, Nik Mohamed and Muhammad Aiman Safwan, Jubri (2021) The implementation of lean manufacturing and ergonomics in small medium enterprise – Case study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012057). ISSN 1757-8981

Ahmad Nasser, Mohd Rose and N. M. Z., Nik Mohamed and M. F. F., Ab Rashid and Hafizzudin, Mohd Noor and Alias, Mohd (2019) Improving productivity using value stream mapping (VSM) - a case study. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-5.. (Unpublished)

Alias, Mohd and M. H. L., Adnan and Nor Bahiyah, Baba and Zainal Ariffin, Selamat and Ahmad Nasser, Mohd Rose and Saiful Bahri, Mohamed (2020) Optimization of surface roughness and tool wear on AISI 4140 using coated Ni-YSZ for CNC turning process. In: 4th International Conference on Engineering Technology, ICET 2019 , 6-7 July 2019 , Darul Iman Training Centre (DITC)Teluk Kalong, Kemaman, Terengganu. pp. 1-12., 1532 (1). ISSN 1742-6588 (print); 1742-6596 (online)

D

Dara, Affydah and A. N. M., Rose and M. F. F., Ab Rashid and N. M. Z., Nik Mohamed (2021) Review of lean manufacturing with IR4.0 in automotive industry. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-8., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Din, Fakhrud and Kamal Zuhairi, Zamli and Abdullah, Nasser (2022) Assessing the chaotic map population initializations for sine cosine algorithm using the case study of pairwise test suite generation. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 371-380., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

F

Fazilah, Abdul Aziz and Nik Mohd Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2023) Introduction of AHP Decision Model for Prioritizing Critical Risk of WMSD in the Automotive Working Environment. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 425-435.. ISSN 2195-4356 ISBN 978-981-99-1244-5

H

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2016) Ergonomics study for workers at food production industry. In: 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute (MAI)Cyberjaya, Selangor. pp. 1-7., 90. ISSN 2261236X

J

Jaffrey, V. and N. M. Zuki, N. M. and A. N. M., Rose (2017) Improvement of productivity in low volume production industry layout by using witness simulation software. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 257. ISSN 17578981

M

M Arif, Abdullah and Mohd Fadzil Faisae, Ab Rashid and Zakri, Ghazalli and Nik Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2018) Modelling of assembly sequence planning problem using base part concept. AIP Publishing. pp. 200131-200135. ISSN 978-0-7354-1752-6. (Published)

M. F. F., Ab Rashid and A. N. M., Rose and N. M. Zuki, N. M. and F. R. M., Romlay (2019) Improved moth flame optimization algorithm to optimize cost-oriented two-sided assembly line balancing. Engineering Computations, 37 (2). pp. 638-663. ISSN 0264-4401. (Published)

M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose and N. M. Zuki, N. M. (2022) Hybrid flow shop scheduling with energy consumption in machine shop using moth flame optimization. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 77-86., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

M. F. F., Ab Rashid and M. M., Razali and Make, M. R. Abdullah and N. M. Zuki, N. M. and A. N. M., Rose (2016) NSGA-II Algorithm for Assembly Line Balancing with Multi-Resource Constraints. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 317-321.. ISBN 978-967-2054-04-7

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N., Mohd Rose and S. A., Che Ghani and W. S., Wan Harun (2015) Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process. Applied Mechanics and Materials, 695. pp. 558-561. ISSN 1662-7482. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N. M., Rose (2019) A modified artificial bee colony algorithm to optimise integrated assembly sequence planning and assembly line balancing. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5905-5921. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. Advances in Smart Systems Research, 5 (1). pp. 30-38. ISSN 2050-8662. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2016) Multi-Objective Optimisation of CNC Milling Process for Al 6061 using Modified NSGA-II. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES 2016) , 5-7 September 2016 , York, United Kingdom. pp. 1-8.. (Unpublished)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2015) Optimization of Traveling Salesman Problem with Precedence Constraint using Particle Swarm Optimization. Journal of Scienctific Research & Development , 2 (13). pp. 212-216. ISSN 1115-7569. (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani and N. M. Z., Nik Mohamed and Ahmad Nasser, Mohd Rose (2014) Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization. Advanced Materials Research, 1043. pp. 65-70. ISSN 1022-6680 (print); 1662-8985 (online). (Published)

M. R. M., Rejab and M. M., Rahman and M. M., Noor and A. N. M., Rose (2008) An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis. .

M.N., Ismail and A. N. M., Rose and N. Z., Mohammed and M. F. F., Ab Rashid (2017) Development of six sigma methodology for CNC milling process improvements. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-15., 257 (1). ISSN 17578981

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2022) Multi-objective multi-verse optimiser for integrated two-sided assembly sequence planning and line balancing. Journal of Combinatorial Optimization, 44 (1). 850 -876. ISSN 1573-2886. (Published)

Mohd Ruzaimi, Mat Rejab and Muhamad, Mat Noor and Rahman, Md Mustafizur and Kadirgama, Kumaran and Mohd Shahrir Mohd, Sani and Ahmad Nasser, Mohd Rose and Rosli, Abu Bakar and Ahmad Syahrizan, Sulaiman (2008) Implementation of outcome based education in the faculty of mechanical engineering, universiti malaysia pahang : An experience. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

Mohd Zaidi, Sidek and Nur Adjla, Mohamad Hafizin and Ahmad Nasser, Mohd Rose and Khairul Azha, Abd Jalal (2013) Experimental Analysis on Martensite Formation of Low Carbon Steel During Rapid Cooling Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Muhamad Arif, Abdullah and M. F. F., Ab. Rashid and Z., Ghazalli and N. M. Z., Nik Mohamed and A. N., Mohd Rose (2018) Modelling of Assembly Sequence Planning Problem using Base Part Concept. In: AIP Conference Proceedings: Proceedings of the 4th International Conference on Green Design and Manufacture 2018 , 29-30 April 2018 , Ho Chi Minh, Vietnam. pp. 1-6., 2030 (020013). ISBN 978-0-7354-1752-6

Muhammad Arif, Abdullah and Ahmad Nasser, Mohd Rose and Zakri, Ghazalli and Ahmad Nasser, Mohd Rose (2019) A case study of energy efficient assembly sequence planning problem. 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 469 (012013). (Published)

Muhammad Zubair, Rehman and Kamal Z., Zamli and Abdullah, Nasser (2020) An improved genetic bat algorithm for unconstrained global optimization problems. In: 9th International Conference on Software and Computer Applications (ICSCA 2020) , 18 - 21 Feb. 2020 , Langkawi, Malaysia. pp. 94-98.. ISBN 978-145037665-5

N

N. H., Zakaria and N. M. Zuki, N. M. and A. N. M., Rose and M. F. F., Ab Rashid (2016) Lean Manufacturing Implementation in Small and Medium Industry. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES2016) , 5-7 September 2016 , York, United Kingdom. . (Unpublished)

N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N., Mohd Rose and Woh, Yu Ting (2014) Production Layout Improvement for Steel Fabrication Works. In: International Conference on Industrial Engineering and Applications (ICIEA 2014) , 29-30 March 2014 , Sydney, Australia. pp. 1-5..

N. W., Z. Abidin and N., Salim and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad Nasser, Mohd Rose and Ahmad Redza, Ahmad Mokhtar (2022) Experimental of multi-holes drilling toolpath using particle swarm optimization and CAD-CAM software on PCB. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 197-204., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nik Mohamed, Nik Mohd Zuki and Noor, M. M. and Rose, Ahmad Nasser Mohd and Razali, Noraini Mohd and Daud, Rosdi and Shalahim, N. S M and Ahmad, Syarifah Nur Aqida Syed (2008) Development of laser cutting and engraving machine utilising PC-NC controller. , [Research Report: Research Report] (Unpublished)

Nik Mohamed, Nik Mohd Zuki and Shalahim, N. S M and Zakri, Ghazali and Ab Rashid, Mohd Fadzil Faisae and Rose, Ahmad Nasser Mohd (2018) Ergonomics study on musculoskeletal disorders (MSD) related problems among workers in electronics assembly line. , [Research Report: Research Report] (Unpublished)

Noor, M. M. and Rahman, M. M. and Sani, M. S.M. and Julie Juliewatty, Mohammed and Nik Mohamed, Nik Mohd Zuki and Rose, Ahmad Nasser Mohd (2008) Numerical study on fatigue life of spot welded for automotive components. , [Research Report: Research Report] (Unpublished)

R

Razali, Muhamad Magffierah and Kamarudin, N.H. and M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose (2019) Recent trend in mixed-model assembly line balancing optimization using soft computing approaches. Engineering Computations, 36 (2). pp. 622-645. ISSN 0264-4401. (Published)