Browse by Journal Title

Monir, Minhaj Uddin and Muntasir Shovon, Shaik and Akash, Faysal Ahamed and Habib, Md Ahosan and Techato, Kuaanan and Azrina, Abd Aziz and Chowdhury, Shahariar and Eka Prasetya, Tofan Agung (2024) Comprehensive characterization and kinetic analysis of coconut shell thermal degradation : Energy potential evaluated via the Coats-Redfern method. Case Studies in Thermal Engineering, 55 (104186). pp. 1-11. ISSN 2214-157X. (Published)

Mohd Anwar, Zawawi and Wan Hamzah, Wan Azmi and Khamisah, Abdul Hamid and Hendrawati, T. Y. and Muhammad Aminullah, Abdul Rahman (2024) Experimental investigation of air-conditioning electrical compressor using binary TiO2–SiO2 polyol-ester nanolubricants. Case Studies in Thermal Engineering, 54 (104045). pp. 1-17. ISSN 2214-157X. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Rajamony, Reji Kumar and Pandey, Adarsh Kumar and Nur Fatin, Sulaiman and Zatil Amali, Che Ramli and Tiong, Sieh Kiong and Koh, Siaw Paw (2024) Potential coolants for fuel cell application: Multi-objective optimization of thermophysical properties and PPF calculation of hybrid palm oil nanofluids. Case Studies in Thermal Engineering, 53 (103931). pp. 1-17. ISSN 2214-157X. (Published)

N. N. M., Zawawi and Hamisa, Abdul Hamid and Wan Azmi, Wan Hamzah and Hendrawati, Tri Yuni and Safril, S. (2023) Performance of hybrid electric vehicle air-conditioning using SiO2/POE nanolubricant. Case Studies in Thermal Engineering, 52 (103717). pp. 1-15. ISSN 2214-157X. (Published)

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Mohd Azmi, Ismail (2023) Effect of diameter, twist angle, and blade count on the thermal-hydraulic performance of a decaying twisted swirler. Case Studies in Thermal Engineering, 50 (103513). ISSN 2214-157X. (Published)

Sofiah, A. G. N. and Pasupuleti, Jagadeesh and Samykano, Mahendran and N.F., Sulaiman and Z.A.C., Ramli and Reji Kumar, R. and Shahabuddin, S. and Pandey, A. K. and Tiong, S. K. and Koh, Siaw Paw (2023) Multi-objective optimization and price performance factor evaluation of polyaniline nanofibers-palm oil nanofluids for thermal energy storage application. Case Studies in Thermal Engineering, 52 (103673). pp. 1-19. ISSN 2214-157X. (Published)

Siti Hanani, Mat Yasin and Muhammad Khairul Anuar, Mohamed and Zulkhibri, Ismail and Mohd Zuki, Salleh (2022) Magnetite water based ferrofluid flow and convection heat transfer on a vertical flat plate: Mathematical and statistical modelling. Case Studies in Thermal Engineering, 40 (102516). pp. 1-10. ISSN 2214-157X. (Published)

Kirpichnikova, I.M. and Sudhakar, K. and Makhsumov, I.B. and Martyanov, A.S. and ShanmugaPriya, S. (2022) Thermal model of a photovoltaic module with heat-protective film. Case Studies in Thermal Engineering, 30. pp. 1-10. ISSN 2214-157X. (Published)

Abdul Rahman, Mohd Kasim and Siti Farah Haryatie, Mohd Kanafiah and Syazwani, Mohd Zokri and S., Shafie (2021) Numerical solutions of convective transport on Brinkman-viscoelastic fluid over a bluff body saturated in porous region. Case Studies in Thermal Engineering, 28 (101341). pp. 1-13. ISSN 2214-157X. (Published)

Ramkiran, B. and Sundarabalan CK, C. K. and Sudhakar, K. (2021) Sustainable passive cooling strategy for PV module: A comparative analysis. Case Studies in Thermal Engineering, 27 (101317). pp. 1-10. ISSN 2214-157X. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Kirpichnikova, I. M. and Cuce, Erdem (2021) Energy analysis of utility-scale PV plant in the rain-dominated tropical monsoon climates. Case Studies in Thermal Engineering, 26 (101123). pp. 1-11. ISSN 2214-157X. (Published)

Kumar, Nallapaneni Manoj and Mahendran, Samykano and Karthick, A. (2021) Energy loss analysis of a large scale BIPV system for university buildings in tropical weather conditions: a partial and cumulative performance ratio approach. Case Studies in Thermal Engineering, 25 (100916). pp. 1-14. ISSN 2214-157X. (Published)

W. H., Azmi and K., Abdul Hamid and A. I., Ramadhan and A. I. M., Shaiful (2021) Thermal hydraulic performance for hybrid composition ratio of TiO2–SiO2 nanofluids in a tube with wire coil inserts. Case Studies in Thermal Engineering, 25 (100899). pp. 1-14. ISSN 2214-157X. (Published)

Muhammad Amir Syahiran, Muhammad Tarminzi and Amir, Abdul Razak and Muhammad Amirul Azwan, Azmi and Ahmad, Fazlizan and Zafri Azran, Abdul Majid and Kamaruzzaman, Sopian (2021) Comparative study on thermal performance of cross-matrix absorber solar collector with series and parallel configurations. Case Studies in Thermal Engineering, 25. pp. 1-17. ISSN 2214-157X. (Published)

A. I., Ramadhan and W. H., Azmi and R., Mamat and Khairiah, Abdul Hamid (2020) Experimental and numerical study of heat transfer and friction factor of plain tube with hybrid nanofluids. Case Studies in Thermal Engineering, 22 (100782). pp. 1-9. ISSN 2214-157X. (Published)

Ramkiran, B. and Sundarabalan, C. K. and Sudhakar, K. (2020) Performance evaluation of solar PV module with filters in an outdoor environment. Case Studies in Thermal Engineering, 21 (100700). pp. 1-9. ISSN 2214-157X. (Published)

Thotakura, Sandhya and Kondamudi, Sri Chandan and Xavier, J. Francis and Quanjin, Ma and Reddy, Guduru Ramakrishna and Gangwar, Pavan and Davuluri, Sri Lakshmi (2020) Operational performance of megawatt-scale grid integrated rooftop solar PV system in tropical wet and dry climates of India. Case Studies in Thermal Engineering, 18 (100602). pp. 1-11. ISSN 2214-157X. (Published)

Ramadhan, A. I. and Azmi, W. H. and Mamat, Rizalman and Abdul Hamid, K. (2020) Experimental and numerical study of heat transfer and friction factor of plain tube with hybrid nanofluids. Case Studies in Thermal Engineering, 22. p. 100782. ISSN 2214-157X. (Published)

Sahu, Alok K. and Sudhakar, K. and Sarviya, R. M. (2019) Influence of U.V light on the thermal properties of HDPE/Carbon black composites. Case Studies in Thermal Engineering, 15 (100534). pp. 1-7. ISSN 2214-157X. (Published)

Sudhakar, K. and Winderl, Maximilian and Priya, S. Shanmuga (2019) Net-zero building designs in hot and humid climates: A state-of-art. Case Studies in Thermal Engineering, 13. pp. 1-16. ISSN 2214-157X. (Published)

Manoj Kumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano (2019) Performance comparison of BAPV and BIPV systems with c-Si, CIS and CdTe photovoltaic technologies under tropical weather conditions. Case Studies in Thermal Engineering, 13. pp. 1-10. ISSN 2214-157X. (Published)

Adnan M., Husein and Dawood, H. K. and R. A., Bakar and K., Kadirgama (2017) Numerical Study on Turbulent Forced Convective Heat Transfer Using Nanofluids TiO2 in an Automotive Cooling System. Case Studies in Thermal Engineering, 9. pp. 72-78. ISSN 2214-157X. (Published)

Deepak, Bishoyi and Sudhakar, K. (2017) Modeling and Performance Simulation of 100 MW LFR Based Solar Thermal Power Plant in Udaipur India. Case Studies in Thermal Engineering, 10. pp. 216-226. ISSN 2214-157X. (Published)

Bishoyia, Deepak and Sudhakar, K. (2017) Modeling and Performance Simulation of 100 MW PTC Based Solar Thermal Power Plant in Udaipur India. Case Studies in Thermal Engineering, 10. pp. 216-226. ISSN 2214-157X. (Published)

M. Kh., Abdolbaqi and C. S. N., Azwadi and R., Mamat (2014) Heat Transfer Augmentation in the Straight Channel by Using Nanofluids. Case Studies in Thermal Engineering, 3. pp. 59-67. ISSN 2214-157X. (Published)

K., Kadirgama and R. A., Bakar and Hussein, Adnan M. (2014) Study of Forced Convection Nanofluid Heat Transfer in the Automotive Cooling System. Case Studies in Thermal Engineering, 2. pp. 50-61. ISSN 2214-157X. (Published)