Browse by Journal Title

A

Abdul Fattah, Mohamad Tahir and Syarifah Nur Aqida, Syed Ahmad and Izwan, Ismail and Nur Ezrin, Mad Sarif (2025) Laser texturing of glass for modified surface energy and hydrophobicity. Jurnal Tribologi, 44. pp. 16-40. ISSN 2289-7232. (Published)

Aiman Nazrin, Noor Ismail and Siti Haryani, Tomadi and Nor Farah Huda, Abd Halim and Mas Ayu, Hassan and Rosdi, Daud (2024) Effect of dry and MQL cutting condition on coated carbide cutting tool during the end milling of Ti-6Al-4V titanium alloy. Jurnal Tribologi, 41. pp. 162-176. ISSN 2289-7232. (Published)

Ainaa, M. Sabri and Norfazillah, Talib and Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Kamaruddin, Kamdani and Kunar, Sandip and Haslina, Abdullah (2024) Enhancing the physical and tribological characteristics of modified jatropha oil via the incorporation of hybrid nanoparticle additives. Jurnal Tribologi, 41. pp. 49-67. ISSN 2289-7232. (Published)

Amiril Sahab, Abdul Sani and Shahandzir, Baharom and Zubaidah, Zamri (2024) Evaluating the chip formation process and machining performance during orthogonal cutting using bio‐based metalworking fluids. Jurnal Tribologi, 43. pp. 31-45. ISSN 2289-7232. (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Radhiyah, Abd Aziz and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2024) Tribological performance of novel modified calophyllum inophyllum nano-fluid from Pahang, Malaysia. Jurnal Tribologi, 40. pp. 1-13. ISSN 2289-7232. (Published)

Arif, Wahjudi and Ahmad Razlan, Yusoff and Sabil, Sabil and Soepangkat, Bobby O. P. and Suhardjono, Suhardjono (2024) A study of end milling process parameter's effect on thin wall aluminum-7075 surface roughness under minimum quantity lubrication. Jurnal Tribologi, 43. pp. 185-196. ISSN 2289-7232. (Published)

Ainaa Mardhiah, Sabri and Norfazillah, Talib and Amiril Sahab, Abdul Sani and Kamaruddin, Kamdani (2023) Evaluation of physicochemical and tribological performances of hBN/WS2 and hBN/TiO2 hybrid nanoparticles-MJO-based oil. Jurnal Tribologi, 37. pp. 84-97. ISSN 2289-7232. (Published)

F

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

M

Musfirah, Abdul Hadi (2025) Machinability and tribological investigation of nano-hybrid cryogenic-MQL during milling Ti-6Al-4V alloy. Jurnal Tribologi, 44. pp. 67-82. ISSN 2289-7232. (Published)

Musfirah, Abdul Hadi (2025) Machinability and tribological investigation of nano-hybrid cryogenicMQL during milling Ti-6Al-4V alloy. Jurnal Tribologi, 44. pp. 67-82. ISSN 2289-7232. (Published)

Mohd Harizan, Zul and Ramdziah, Md Nasir and Mahadzir, Ishak@Muhammad and Moinuddin Mohammed, Quazi (2024) The effect of PDMS on Ti6Al4V for surface anti-wear and corrosion resistance. Jurnal Tribologi, 43. pp. 138-157. ISSN 2289-7232. (Published)

Mohd Saifuldin, Mohd Mokhtar and Ahmad Razlan, Yusoff (2024) Effect of micro-milling parameters on burr formation and surface roughness in aluminum microchannels puncher. Jurnal Tribologi, 41. pp. 129-143. ISSN 2289-7232. (Preprint)

Mohd Harizan, Zul and Mahadzir, Ishak and Ramdziah, Md Nasir and Aiman, Mohd Halil and Moinuddin, Mohammed Quazi (2024) Effect of multi-geometrical laser pattern of Ti6Al4V on frictional wear behaviour. Jurnal Tribologi, 40. pp. 78-94. ISSN 2289-7232. (Published)

Mohd Ali Hanafiah, Shaharudin and Ahmad Razlan, Yusoff (2023) Using Finite Element simulation to investigate the effect of cutting edge radius on burr formation for inclined dimple milling operation. Jurnal Tribologi, 38. pp. 49-68. ISSN 2289-7232. (Published)

Mohd Fawzi, Zamri and Ahmad Razlan, Yusoff (2022) Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels. Jurnal Tribologi, 34 (MITC202ONE (Part 2)). pp. 1-11. ISSN 2289-7232. (Published)

N

Norhafzan, Bariman and Syarifah Nur Aqida, Syed Ahmad and Izwan, Ismail and Khairil, Che Mat (2024) Thermal stability of laser modified die insert surface in hot press forming of 22MnB5. Jurnal Tribologi, 43. pp. 86-103. ISSN 2289-7232. (Published)

Nurul Dayana, Mohd Noor and Musfirah, Abdul Hadi (2023) Study of tool wear progression using nano-hybrid Cryogenic MQL in milling titanium alloy. Jurnal Tribologi, 37. pp. 76-83. ISSN 2289-7232. (Published)

Nur Athirah, Mohamad Radzi and Azizul Helmi, Sofian and Saidatul Shima, Jamari (2020) Structural studies of surface modified oil palm empty fruit bunch with alkaline pre-treatment as a potential filler for the green composite. Jurnal Tribologi, 26. pp. 75-83. ISSN 2289-7232. (Published)

Norfazillah, Talib and Amiril Sahab, Abdul Sani and Erween, Abd Rahim and S. A., Che Ghani and Syahrullail, Samion (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19. pp. 98-106. ISSN 2289-7232. (Published)

S

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Aiman, Mohd Halil and M., Ishak (2020) Effect of LST parameter on surface morphology of modified copper substrates. Jurnal Tribologi, 26. pp. 84-91. ISSN 2289-7232. (Published)

Soffarina M., Soffie and Izwan, Ismail and Nurain, Mutalib and Syarifah N., Aqida (2020) The morphological and surface roughness of magnetorheological polished AISI 6010 surface. Jurnal Tribologi, 24. pp. 80-99. ISSN 2289-7232. (Published)

Siti Rohaida, Mohamed and Saiful Anwar, Che Ghani and Sawangsri, Worapong (2019) Mechanical properties of additive manufactured CoCrMo meta-biomaterials for load bearing implants. Jurnal Tribologi, 21. pp. 93-107. ISSN 2289-7232. (Published)