Browse by Journal Title

A

Athirah, B. and Nurul Shahida, Mohd Shalahim (2021) Effects of aircraft noise on residents nearby a Malaysian airport. Materials Science and Engineering, 1068 (012010). pp. 1-17. ISSN 1757-899X. (Published)

A. M., Aizzuddin and Z. M., Hafizi and Kee, L. V. and Vorathin, E. and Lim, Kok Sing (2017) Development of Fibre Bragg grating (FBG) dynamic pressure transducer with diminutive voltage inconsistency. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , The Swiss Garden Beach Resort, Kuantan. pp. 1-10., 257 (012080). ISSN 1757-899X

Asnul Hadi, Ahmad and S., Naher and D., Brabazon (2014) Injection Tests and Effect On Microstructure and Properties of Aluminium 7075 Direct Thermal Method Feedstock Billets. Materials Science and Engineering, 611-612. pp. 1637-1644. (Published)

D

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin Wax Removal from Metal Injection Moulded Cocrmo Alloy Compact by Solvent Debinding Process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-10., 257 (012020). ISSN 1757-899X

I

Ismail, Mohd Khairuddin and Zahari, Taha and Anwar, P. P. Abdul Majeed and Abdel Hakeem, Deboucha and Mohd Azraai, M. Razman and Abdul Aziz, Jaafar and Zulkifli, Mohamed (2016) A Hybrid Joint Based Controller for an Upper Extremity Exoskeleton. Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-899X. (Published)

L

Low, M. H. and M. N.A., Mukhtar and Hagos, F. Y. and M. M., Noor (2017) Tri-fuel (diesel-biodiesel-ethanol) emulsion characterization, stability and the corrosion effect. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-11., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Lee, K.H. and N. A. M, Mukhtar and Hagos, F. Y. and M. M., Noor (2017) A study of the stabilities, microstructures and fuel characteristics of tri-fuel (diesel-biodiesel-ethanol) using various fuel preparation methods. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-15., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

M

Mohd Yazid, Abu and S N A M, Zaini (2021) Optimization of capacity utilization using time-driven activity-based costing for library system. In: The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , Pekan Pahang , 22-23 December 2020. pp. 1-10., 1092. ISSN 1757-8981 (Print); 1757-899X (Online)

M. A. M, Abdullah and M. S., Man and Syamsul. Bahari, Abdullah and Syed Mohd Saufi, Tuan Chik (2020) Synthesis and characterization of thermo-responsive ionic liquids (TRILs). In: UNSPECIFIED . , 736. ISSN 1757-899X

M. Shahkhir, Mozamir and Rohani, Abu Bakar and Wan Isni Soffiah, Wan Din and Zalili, Musa (2020) GbLN-PSO Algorithm for indoor localization in wireless sensor network. Materials Science and Engineering, 769 (012033). pp. 1-9. ISSN 1757-899X. (Published)

M. F., Nabil and Azmi, W. H. and K. A., Hamid and R., Mamat (2017) Heat transfer and friction factor of composite TiO2-SiO2 nanofluids in water-ethylene glycol (60:40) mixture. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-8., 257 (1). ISSN 1757-8981(print); 1757-899X(online)

M. A. A., Aziz and Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and Mohd Adnin, Hamidi and Azri, Alias and H., Hussin and S., Hamri (2017) Study of alcohol fuel of butanol and ethanol effect on the compression ignition (CI) engine performance, combustion and emission characteristic. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-13., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

M. A., Anwar and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Oumar, A. N. and Nandyanto, A. B. D. (2017) Morphology Evaluation of ZrO2 Dip Coating on Mild Steel and its Corrosion Performance in NaOH Solution. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-6., 257 (012087). ISSN 1757-899X

M. F. F. A., Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and S. A., Che Ghani and M. Z., Azir (2017) Study of Solvent Debinding Parameters for Metal Injection Moulded 316L Stainless Steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012035). ISSN 1757-899X

Mohd Zaidi, Sidek (2016) Determination of Heat Transfer Coefficient for an Interaction of Sub-cooled Gas and Metal. Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-899X. (Published)

Muchamad , Oktaviandri and Adnan, Hassan and Awaluddin, Mohd. Shaharoun (2016) Generation of Look-Up Tables for Dynamic Job Shop Scheduling Decision Support Tool. Materials Science and Engineering, 114. pp. 1-9. (Published)

M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2011) Identification of Dynamics Modal Parameter for Car Chassis. Materials Science and Engineering, 17 (1). ISSN 1757-899X. (Published)

Mohd Fadzil, Rahim and Abdul Aziz, Jaafar and Rizalman, Mamat and Zahari, Taha Performance assessment of direct injection compressed natural gas vehicle at different injection pressures using speed-sweep test method. Materials Science and Engineering, Volume 788 (012068). ISSN 1757-899X. (Published)

N

Norsafiah, Fazli and N S, A Mutamim and S A, Ibrahim (2020) Bioelectrochemical cell (BeCC) integrated with granular activated carbon (GAC) in treating spent caustic wastewater: effects of mixed liquor suspended solid (MLSS). Materials Science and Engineering, 736 (072010). pp. 1-10. ISSN 1757-899X. (Published)

N. I., Azahar and Nadzirah, Mohd Mokhtar and Mohd Azmir, Arifin (2020) Piper betle: a review on its bioactive compounds, pharmacological properties, and extraction process. Materials Science and Engineering, 991 (012044). pp. 1-17. ISSN 1757-899X. (Published)

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and Nur Zalikha, Khalil and F., Ahmad and M. H., Ismail and S., Sharif (2017) Effect of Heat Treatment on Mechanical Properties and Microstructure of Selective Laser Melting 316L Stainless Steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012021). ISSN 1757-899X

N. S. M., Nawi and B. M., Deros and M. N., A. Rahman and Ezrin Hani, Sukadarin and N., Nordin and S. B. M., Tamrin and S. A., Bakar and M. L., Norzan (2015) Conceptual Design of Semi-Automatic Wheelbarrow to Overcome Ergonomics Problems Among Palm Oil Plantation Workers. In: IOP Conference Series: Materials Science and Engineering: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-7., 100. ISSN 1757-899X

P

Putra Jaya, Ramadhansyah and Noram Irwan, Ramli and Mohd Khairul Idham, Mohd Satar and N.A., Abdullah and Mohd Rosli, Hainin and Norhidayah, Abdul Hassan and Haryati, Yaacob and Muhammad Naqiuddin, Mohd Warid and A., Mohamed (2018) Effect of black rice husk ash on asphaltic concrete properties under aging condition. In: 14th International Conference on Concrete Engineering and Technology, CONCET 2018 , 8-9 August 2018 , Kuala Lumpur, Malaysia. pp. 1-6., 431 (3). ISSN 1757-899X

Putra Jaya, Ramadhansyah and Noram Irwan, Ramli and Mohd Ezree, Abdullah and M. N.A., Shahafuddin and Haryati, Yaacob and M. H., Wan Ibrahim and Mohamed Nazri, Fadzli and A. A., Mohammed (2018) Performance of Kaolin Clay on the concrete pavement. In: 3rd International Conference on Global Sustainability and Chemical Engineering, ICGSCE 2017 , 15-16 February 2017 , Marriot Hotel, Putrajaya; Malaysia. pp. 1-5., 358 (1). ISSN 1757-899X

V

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and Lim, Kok Sing and A. M., Aizzuddin (2017) The use of an improved technique to reduce the variability of output voltage in real-time Fibre Bragg Grating based monitoring system. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , The Swiss Garden Beach Resort, Kuantan. pp. 1-11., 257 (012001). ISSN 1757-8981 (Print); 1757-899X (Online)

Y

Ya'acob, A. and Zainol, N. and Mohd Ridza, P. N. Y. and Mortan, S. H. (2021) Pineapple leaves juice characterization for microbial growth inhibition. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-9., 1092 (012088). ISSN 1757-899X

Z

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Zulfika, Anuar (2013) Predicting Brain Acceleration During Heading Of Soccer Ball. Materials Science and Engineering, 50. pp. 1-6. ISSN 1757-899X. (Published)