Development of Hexaquad Robot: Modeling and Framework

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

Irawan, Addie and A. R., Razali and Wan Faizal, Wan Ishak and Mohd Rizal, Arshad and Tan, Yee Yin (2015) Development of Hexaquad Robot: Modeling and Framework. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17506-17513. ISSN 1819-6608

[img] PDF
Restricted to Repository staff only


Official URL:


This paper presents a proposed reconfigurable multi-legged robot named Hexapod-to-Quadruped (Hexaquad) robot. Reconfigurable legged robot is one of the robotics research area that is generally focused on optimizing the usage of leg during locomotion. Until recent years, most of the researches emphasized on leg reconfigurable design in order to solve the fault tolerant, stability, multi-tasking and energy efficiency. However, the emphasis of the Hexaquad robot is on providing optimum leg usage, actuation configuration as well as satisfying the legged robot stability criterion in reconfiguration mechanism. Inspired from several living creatures, such as insects, crustacean and peristaltic creatures, Hexaquad is designed and modeled to perform flexible spine for leg adjustment and foot-to-gripper transformation. The design also implements the indirect and parallel actuation configuration on leg-joint motion for optimum torque on the joint of each leg without motor/actuator mass affect that commonly happens in multi-limbed system with direct drive configuration. The minimum torque on each joint of the leg is calculated using the static torque calculation on multi-link structure before the actuator/motor is selected, and verification is done by performing fundamental testing on the leg’s movement and standing using direct switching and supply voltage. Further testing and analysis were conducted on the gripper by performing gripping tests using materials of different weight and shape versus total load current on the leg’s actuators. Stress and displacement testing and analysis were also done on the foot-to-gripper (FTG) structure of Hexaquad robot. The results show that the FTG is able to hold 50N forces without any breaking point being detected as well as able to maintain its shape, strength and position upon receiving the forces (surpassing the main objective to lift a 5kg load).

Item Type:Article
Uncontrolled Keywords:Hybrid bio-inspired robot, Reconfigurable mechanism, Foot-to-gripper transformation
Subjects:T Technology > TJ Mechanical engineering and machinery
T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Centre of Excellence: Centre for Earth Resources Research & Management
Faculty of Electrical & Electronic Engineering
Faculty of Mechanical Engineering
ID Code:10536
Deposited By: Mrs. Neng Sury Sulaiman
Deposited On:30 Sep 2015 09:29
Last Modified:09 Jan 2018 09:51

Repository Staff Only: item control page








An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.

Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to