Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: ' | - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 4486.

'

'Umayr Hasan, Sohaimi (2007) Fatigue strength to the different type of specimens and shapes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

-

-, - Enhancing performance and emission on a turbocharged gasoline engine. , [Research Report: Research Report] (Unpublished)

-, - (2019) Stereolithography 3D printing development of 3D printing machine controller using the predefined closest-distance volume interpolator system. , [Research Report: Research Report] (Unpublished)

A

A., Shamsudeen and S., Abdullah and A. K., Ariffin and Yusoff, Ali (2013) Design and Simulation of a Cylinder Head Structure for A Compressed Natural Gas Direct Injection Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1620-1629. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A., Asogan and N., Sazali and F. M., Said and R. Z., Edros and M. F., Ghazali and S. A., Che Ghani (2023) A Mini Review on Working Mechanism, Standard Operating Procedure (SOP) and Preventative Maintenance of Low Temperature Long Term (LTLT) Milk Pasteurizer. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 24-29. ISSN 2636-9575. (Published)

A., Azidin and Z. A. M., Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and M. A., Omar and H., Ramli (2015) Investigation of Mechanical Properties for Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A., Irawan and Putra Azahar, M. I. and Hashimi, M. A. (2022) Sensorless force estimation on fingertip with gravitational compensation for heavy-duty pneumatic tri-grasper robot. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-5.. ISBN 978-1-83953-782-0

A., Jamar and Z. A. A., Majid and Azmi, W. H. and M., Norhafana and A. A., Razak (2016) A Review of Water Heating System for Solar Energy Applications. International Communications in Heat and Mass Transfer, 76. pp. 178-187. ISSN 0735-1933. (Published)

A., Malik Hamat and M. F., Ghazali and Makeen, Mohd Amin and Fatihah, Adnan (2016) Irregularity Detection In Numerical Signal Using Time-Frequency Analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608. (Published)

A., Nugroho and Z., Bo and R., Rizalman and W. H., Azmi and G., Najafi and F., Khoirunnisa (2021) Extensive examination of sonication duration impact on stability of Al2O3-Polyol ester nanolubricant. International Communications in Heat and Mass Transfer, 126 (105418). pp. 1-14. ISSN 0735-1933. (Published)

A., Rahimi and B., Ghobadian and G., Najafi and F., Jaliliantabar and R., Mamat (2015) Performance and Emission Parameters of Single Cylinder Diesel Engine Using Castor Oil Bio-Diesel Blended Fuels. In: IOP Conference Series: Materials Science and Engineering: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100. ISBN 1757-8981 (print); 1757-899X (online)

A., Shah and S., Izman and Abdul-Kadir, Mohammed Rafiq and Mas Ayu, Hassan (2017) Influence of Substrate Temperature on Adhesion Strength of TiN Coating of Biomedical Ti-13Zr-13Nb Alloy. Arabian Journal for Science and Engineering, 42 (11). pp. 4737-4742. ISSN 2193-567X. (Published)

A., Shah and S., Izman and Mas Ayu, Hassan (2016) Influence Of Nitrogen Flow Rate In Reducing Tin Microdroplets On Biomedical TI-13ZR-13NB Alloy. Jurnal Teknologi (Sciences and Engineering), 78 (5-10). pp. 6-10. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

A., Shah and S., Izman and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud and Mohammed Rafiq, Abdul Kadir (2018) Physical Vapour Deposition on corrosion resistance: A review. ARPN Journal of Engineering and Applied Sciences, 13 (10). o3515-3523. ISSN 1819-6608. (Published)

A., Shah and Siti Nurul Fasehah, . and Mas Ayu, Hassan and Rosdi, Daud and Che Ghani, Che Kob (2021) Improvement of corrosion resistance of tin coated on titanium alloy for biomedical application. In: Journal of Physics: Conference Series; 2nd UPY International Conference on Applied Science and Education, UPINCASE 2020 , 3 - 4 November 2020 , Yogyakarta, Virtual. pp. 1-10., 1823 (1). ISSN 1742-6588

A., Shah and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud and Che Ghani, Che Kob (2021) Improvement of corrosion resistance of tin coated on titanium alloy for biomedical application. In: Journal of Physics: Conference Series; 2nd UPY International Conference on Applied Science and Education, UPINCASE 2020 , 3 - 4 November 2020 , Yogyakarta, Virtual. pp. 1-10., 1823 (1). ISSN 1742-6588 (print); 1742-6596 (online)

A., Shah and Sudin, Izman and Mas Ayu, Hassan and Ramlee, Mustapha (2016) Optimization of Chemical Pretreatment for Removing Cobalt on Tungsten Carbide Substrate Using Response Surface Methodology. Jurnal Teknologi (Sciences and Engineering), 78 (5-10). pp. 24-32. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

A. A .M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanolubricant Automotive Air Conditioning (AAC) Test Rig. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished)

A. A., Hairuddin and H. M., Tobib and Z., Fariza and M. M., Noor (2019) The performance of a single-cylinder diesel engine fuelled with egusi based biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012045). ISSN 1757-899X

A. A., Ibrahim and P. L., Chong and V. S., Rajasekharan and M. M., Ali and O. S., Zaroog and A. N., Oumer (2020) Investigation of the effect of different materials on convective heat transfer. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). pp. 6642-6651. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. A., Lahimer and A. A., Razak and A. F., Sharol and K., Sopian (2023) Automotive cabin soak temperature control strategies for improved safety, comfort and fuel efficiency: A review. Solar Energy, 259. 416 -436. ISSN 0038-092X. (Published)

A. A., Mohammed and Bachtiar, Dandi and M. R. M., Rejab and Jiang, X. X. and Abas, Falak O. and Abass, Raghad U. and Hasany, S. F. and Siregar, J. P. (2018) Effects of KMnO4 treatment on the Flexural, Impact, and Thermal properties of sugar palm fiber-reinforced thermoplastic polyurethane composites. JOM, 70 (7). pp. 1326-1330. ISSN 1047-4838. (Published)

A. A., Mohammed and Bachtiar, Dandi and M. R. M., Rejab and S. F., Hasany (2017) Effect of Potassium Permanganate on Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846(print); 0974-5645(online). (Published)

A. A., Mohammed and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab (2016) Effect of Sodium Hydroxide on The Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane Composites. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1765-1777. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. A., Razak and Z. A. A., Majid and Azmi, W. H. and M. H., Ruslan and Choobchian, Sh. and G., Najafi and K., Sopian (2016) Review on Matrix Thermal Absorber Designs for Solar Air Collector. Renewable and Sustainable Energy Reviews, 64. pp. 682-693. ISSN 1364-0321. (Published)

A. A., Razak and Zafri Azran, Abdul Majid and F., Basrawi and A. F., Sharol and M. H., Ruslan and K., Sopian (2019) A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy, 178. 314 - 330. ISSN 0038-092X. (Published)

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanorefrigerants for Various Types of Refrigerant based: A Comprehensive Review on Performance. International Communications in Heat and Mass Transfer, 76. pp. 285-293. ISSN 0735-1933. (Published)

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat and Mahendran, Samykano and G., Najafi (2019) Performance improvement in mobile air conditioning system using Al2O3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1299-1310. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

A. A. M., Redhwan and W. H., Azmi and M. Z., Sharif and R., Mamat and Nurul Nadia, Mohd Zawawi (2017) Comparative Study of Thermo-physical Properties of SiO2 and Al2O3 Nanoparticles Dispersed in PAG Lubricant. Applied Thermal Engineering, 116. pp. 823-832. ISSN 1359-4311. (Published)

A. A. M., Redhwan and W. H., Azmi and Nurul Nadia, Mohd Zawawi and M. Z., Sharif and R., Mamat (2018) Sonication Time Effect towards Stability of Al2O3/PAG and SiO2/PAG Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 14-27. ISSN 1823-5514. (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Energy Harvesting on Pavement: A Review. International Journal of Renewable Energy Research, 11 (3). pp. 1250-1266. ISSN 1309-0127. (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Influence of polymer coated aggregate on the aggregate impact and crushing value. In: International Postgraduate Conference on Mechanical Engineering , 19th-20th January 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012039). ISSN 1757-899X

A. F., Ahmad and A. R., Razali and I. S. M., Razelan (2017) Utilization of Polyethylene Terephthalate (PET) in Asphalt Pavement: A Review. In: IOP Conference Series: Materials Science and Engineering, Mechanical Engineering, Science and Technology International Conference , 19-20 April 2017 , Johor Bahru, Johor, Malaysia. pp. 1-7., 203 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)

A. F., Ahmad and A. R., Razali and I. S. M., Razelan and S. S. A., Jalil and M. S. M., Noh and A. A., Idris (2017) Utilization of Polyethylene Terephthalate (PET) in Bituminous Mixture for Improved Performance of Roads. In: IOP Conference Series: Materials Science and Engineering, Mechanical Engineering, Science and Tech nology International Conference , 19-20 April 2017 , Johor Bahru, Johor, Malaysia. pp. 1-11., 203 (012005). ISSN 1757-8981 (Print), 1757-899X (Online)

A. F., Ahmad and A. R., Razali and Intan Suhana, Mohd Razelan and W. A. H. W., Hamizan (2019) Effect of waste polyethylene terephthalate (PET) on properties of road aggregate. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012056). ISSN 1757-8981 (Print), 1757-899X (Online)

A. F., Jusoh and M. R. M., Rejab and Siregar, J. P. and Bachtiar, Dandi (2016) Natural Fiber Reinforced Composites: A Review on Potential for Corrugated Core of Sandwich Structures. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00033). ISSN 2261-236X

A. F. H., Fansuri and A. N. M., Rose and M. F. F., Ab. Rashid and N. M. Zuki, N. M. and H., Ahmad (2018) Productivity Improvement Through Line Balancing at Electronic Company - Case Study. In: IOP Conference Series: Materials Science and Engineering, The 3rd International Conference on Manufacturing, Material and Metallurgical Engineering , 17–19 March 2018 , Kuala Lumpur, Malaysia. pp. 1-10., 409 (012015). ISSN 1757-899X

A. F. H. , Fansuri and A. N. M., Rose and N. M. Zuki, N. M. and H., Ahmad (2017) The Challenges of Lean Manufacturing Implementation in Kitting Assembly. In: IOP Conference Series:International Conference of Mechanical Engineering Research (ICMER2017) , 1 - 2 August 2017 , Kuantan, Malaysia. , 257 (012069). ISSN 17578981

A. Fahmi Huwaidi, M. Noor and Nasrul Hadi, Johari (2022) Brief review on recent technology in particle image velocimetry studies on hemodynamics in carotid artery. In: Human Engineering Symposium, HUMENS 2021 , 22 February 2021 - 22 February 2021 , Virtual Online. pp. 267-277. (266559). ISSN 21954356 ISBN 9789811641145

A. G. N., Sofiah and Samykano, Mahendran and J., Rivas Murillo and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2016) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. In: International Conference on Computational Science and Engineering 2016 , 28-30 November 2016 , The Magellan Sutera Resort, Kota Kinabalu. pp. 1-5., 4 (2).

A. H, Hamisa and Mohd Yusof, Taib and W. H., Azmi and R., Mamat and M. Z., Sharif (2020) The stability of TiO2/POE nanolubricant for automotive air-conditioning system of hybrid electric vehicles. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981

A. H., Fauzi and M. Z., Sulaiman (2023) Effect of air filter pressure on fuel consumption and cost of gas turbine in Southern Power Generation, Malaysia. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 655 -667.. ISSN 2195-4356 ISBN 978-981191456-0

A. H., Sufian and A. S., Jamaludin and A. N., Ibrahim and M. N., Mhd Razali and M. S., Osman and S. B., Hamzah (2019) Tyre Safety Performance on Asphalt Pavement in Malaysia Climate - Analysis through Finite Element Method. Journal of the Society of Automotive Engineers Malaysia, 3 (3). pp. 236-245. ISSN 2600-8092(Printed); 2550-2239(Online). (Published)

A. I., Ramadhan and W. H., Azmi and R., Mamat and K. A., Hamid and Norsakinah, S. (2019) Investigation on stability of tri-hybrid nanofluids in water-ethylene glycol mixture. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012068). ISSN 1757-899X

A. I., Ramadhan and W. H., Azmi and R., Mamat and Khairiah, Abdul Hamid (2020) Experimental and numerical study of heat transfer and friction factor of plain tube with hybrid nanofluids. Case Studies in Thermal Engineering, 22 (100782). pp. 1-9. ISSN 2214-157X. (Published)

A. I., Yahaya and S. A., Che Ghani and Daing Mohamad Nafiz, Daing Idris and M. A., Aziz (2023) End-mill carbide tool wear in machining metallic biomaterial. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 783 -792.. ISSN 2195-4356 ISBN 978-981191456-0

A. J. S., Hanifah and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Enhancement of mechanical properties of Copper Brazed by laser surface modification. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012012). ISSN 1757-899X

A. J. S., Hanifah and W. N. W. M. N., Hissyam and Aiman, M. H. and M., Ishak and T., Ariga (2019) Effect of copper based filler composition on the strength of brazed joint. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5090-5103. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. K., Amirruddin and K., Kadirgama and M., Samykano and D., Ramasamy and M. M., Rahman and M. M., Noor (2018) Coefficient of friction and specific wear rate prediction model using response surface methodology for waste cooking oil blended lubricant. In: 7th International Conference on Design and Concurrent Engineering IDECON 7.0 , 17 - 18 September 2018 , Kuching, Sarawak. pp. 1-14..

A. K., Amiruddin and S. M., Sapuan and A. A., Jaafar (2011) Development of a hovercraft prototype with an aluminium hull base. International Journal of Physical Sciences, 6 (17). pp. 4185-4194. ISSN 1992-1950. (Published)

A. K., Amiruddin and S.M, Sapuan (2007) Burner Flame Image Analysis Techniques. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

A. K., Azad (2012) A Comprehensive Study of Di Diesel Engine Performance Withvegetable Oil: An Alternative Bio-Fuel Source of Energy. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 576-586. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

A. K., Prasada Rao (2014) Understanding the Evolution of the Microstructure in Melt-Conditioned Direct-Chill Cast Al Alloys. Materials and Manufacturing Processes, 29 (7). pp. 848-852. ISSN 1042-6914. (Published)

A. M., Aizzuddin and Danial Shafiq, Mohd Rashid and Mohd Yusof, Taib and Wan Azmi, Wan Hamzah (2022) Simulation of the ground heat exchanger under malaysian environment based on different thermal conductivity of soil and pipe materials. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 155..

A. M., Aizzuddin and Z. M., Hafizi and Kee, L. V. and Vorathin, E. and Lim, Kok Sing (2017) Development of Fibre Bragg grating (FBG) dynamic pressure transducer with diminutive voltage inconsistency. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , The Swiss Garden Beach Resort, Kuantan. pp. 1-10., 257 (012080). ISSN 1757-899X

A. M., Efendee and M., Saifuldin and Gebremariam, M.A. and Azmir, Azhari (2018) Effect of magnetic polarity on surface roughness during magnetic field assisted EDM of tool steel. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 1757-8981

A. M., Norkhizan and R., Mamat and A., Hamidi and Ahmad Fitri, Yusop (2019) Influence of TDSI/LUTAH fuel booster on the performance and emissions of diesel engine. In: AIP Conference Proceedings: , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-10., 2059 (020042).

A. M. A., Budiea and N., Yahaya and A. H., Abdullah and M. H. W., Ibrahim and A., Suratkon and Khairunisa, Muthusamy (2020) Corrosion study of pipeline material for seabed sediment in tropical climate. In: IOP Conference Series: Materials Science and Engineering; 4th International Conference on Construction and Building Engineering and 12th Regional Conference in Civil Engineering, ICONBUILD and RCCE 2019 , 20 - 22 August 2019 , Langkawi, Malaysia. pp. 1-9., 849 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A. Malik, Hamat and M. F., Ghazali and Priyandoko, Gigih (2017) The use of transmission line modelling for detection of leakage in pipeline. Journal of Mechanical Engineering, SI 4 (4). pp. 74-83. ISSN 1823-5514. (Published)

A. N., Esa and M. H., Yusof and Fredoline, D. Sipaan and M. F., Suhaimi (2023) Development of cooling necklace system using vortex tube. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 971 -980.. ISSN 2195-4356 ISBN 978-981191456-0

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608. (Published)

A. N., Oumer and Azizuddin, Abd Aziz and Noor Azirhan, Sahat (2018) Numerical investigation on effect of blade shape for stream water wheel performance. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A. N., Oumer and Bachtiar, Dandi (2014) Modeling and Experimental Validation of Tensile Properties of Sugar Palm Fiber Reinforced High Impact Polystyrene Composites. Fibers and Polymers, 15 (2). pp. 334-339. ISSN 1229-9197 (Print); 1875-0052 (Online). (Published)

A. N., Oumer and M. S., Idris and N. M. M., Ammar and Kurniawan, Tedi (2015) Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene. Advanced Materials Research, 1115. pp. 283-287. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. N., Oumer and N. M., Hamidi and Idris, Mat Sahat (2015) Numerical Prediction of Flow Induced Fibers Orientation in Injection Molded Polymer Composites. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

A. N., Oumer and N. T., Rao and F., Basrawi and Hassan, Ibrahim (2016) Numerical Simulation on Flow and Heat Transfer Characteristics of Supercritical Fluids in Mini-Channels. Journal of Advances in Technology and Engineering Research. pp. 1-5. ISSN 2414-4592. (Published)

A. N. M., Rose and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2008) Polypropylene Reinforced With Recycle Polyethylene Terephthalate As An Alternative Material For New Plastic Product. In: 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. pp. 1-5..

A. N. M., Rose and B., Md. Deros and M. N., Ab. Rahman (2013) Lean manufacturing perceptions and actual practice among Malaysian SME's in automotive industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (1). pp. 820-829. ISSN 2180-1606. (Published)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) Lean Manufacturing Perceptions and Actual Practice Among Malaysian SME’s in Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 820-829. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) A Study on Lean Manufacturing Implementation in Malaysian Automotive Component Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1467-1476. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. N. M., Rose and B. M., Deros and M. N. A., Rahman (2014) Critical success factors for implementing lean manufacturing in Malaysian automotive industry. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1191-1200. ISSN 2040-7459. (Published)

A. N. M., Rose and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad, H. (2017) Similarities of Lean Manufacturing Approaches Implementation in SMEs Towards The Success: Case Study in the Automotive Component Industry. In: MATEC Web of Conferences: The 9th International Unimas Stem Engineering Conference (ENCON 2016) , 26-28 October 2017 , Sarawak, Malaysia. pp. 1-6., 87 (02024). ISSN 2261-236X

A. Q., Zaifuddin and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak and Shamini, J. (2021) Influence of laser surface texturing (LST) parameters on the surface characteristics of Ti6al4v and the effects thereof on laser heating. Lasers in Engineering, 51 (6). 355 -367. ISSN 0898-1507. (Published)

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

A. Q., Zaifuddin and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Effect of laser surface modification (LSM) on laser energy absorption for laser brazing. In: OP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019) , 30-31 Julai 2019 , Vistana Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 788 (012013). ISSN 1757-899X

A. R., Razali and C. T., Ann and A. F., Ahmad and Nazrul Idzham, Kasim (2017) Finite element structural analysis of a low energy micro sheet forming machine concept design. In: Mechanical Engineering Science And Technology 2017 , 19-20 April 2017 , Politeknik Metro, Johor Bahru. pp. 1-6., 203 (1). ISSN 17578981 (Unpublished)

A. R., Razali and F. R. M., Romlay and Leong, Yap Wee and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Performance and optimum characteristics by finite element analysis of a coreless ironless electric generator for low wind density power generation. In: AIP Conference Proceedings: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 342 (1). ISSN 1757-8981

A. R., Razali and F. R. M., Romlay and Syaiful, Azlan and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Open circuit V-I characteristics of a coreless ironless electric generator for low density wind power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-7., 342 (1). ISSN 1757-8981

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Maximum power point tracking analysis of a coreless ironless electric generator for renewable energy application. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) V-I characteristics of a coreless ironless electric generator in a closed-circuit mode for low wind density power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-6., 342 (1). ISSN 1757-8981

A. R., Razali and M., Ishak and Mohd Azam, Musa and Nazrul Idzham, Kasim and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Autonomous Maintenance in Crankcase Line. Applied Mechanics and Materials, 761. pp. 165-169. ISSN 1662-7482. (Published)

A. R., Razali and M., Ishak and Nazrul Idzham, Kasim and Mohd Azam, Musa (2015) Effect of Magnetic Flux on Rotor-Stator Arrangement of Neodymium Permanent Magnet. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7749-7752. ISSN 1819-6608. (Published)

A. R., Razali and Nazrul Idzham, Kasim and Mohd Azam, Musa and Noraishah, Mohamad Noor and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Total Productive Maintenance (TPM) in Manufacturing Industries. Applied Mechanics and Materials, 761. pp. 180-185. ISSN 1662-7482. (Published)

A. R., Razali and Qin, Yi (2013) A Review on Micro-manufacturing, Micro-forming and Their Key Issues. Procedia Engineering, 53. pp. 665-672. ISSN 1877-7058. (Published)

A. R., Yusoff (2016) Identifying Bifurcation Behavior during Machining Process for an Irregular Milling Tool Geometry. Measurement, 93. pp. 57-66. ISSN 0263-2241. (Published)

A. R., Yusoff and B. M., Deros and D. D. I., Daruis and E. H., Sukadarin (2019) Foot-Transmitted Vibration: Automotive Accelerator Pedal-Pad Vibration on Tarmac and Paved Road. Journal of the Society of Automotive Engineers Malaysia, 3 (1). pp. 50-62. ISSN 2550-2239. (Published)

A. R., Yusoff and Mohamed Reza Zalani, Mohamed Suffian and Mohd Yusof, Taib (2011) Literature Review of Optimization Techniques for Chatter Suppression In Machining. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 47-61. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. R., Yusoff and Nafrizuan, Mat Yahya (2011) A refined differential evolution algorithm for improving the performance of optimization process. In: International Conference on Informatics Engineering and Information Science (ICIEIS 2011) , 14-16 November 2011 , Kuala Lumpur. pp. 184-194., 252 (2). ISSN 1865-0929 ISBN 978-364225452-9

A. R., Yusoff and Z., Ghazalli and Hazami, Che Hussain (2009) Determining Optimum EDM Parameters in Drilling a Small Hole by Taguchi Method. International Journal of Manufacturing Technology and Management, 17 (4). pp. 345-352. ISSN 1368-2148. (Published)

A. R., Zulhishamuddin and S. N., Aqida (2015) An Overview of High Thermal Conductive Hot Press Forming Die Material Development. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1686-1694. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. R., Zulhishamuddin and S. N., Aqida and E. A., Rahim (2016) Optimization of Pulsed Nd:YAG Laser Melting of Gray Cast Iron At Different Spot Sizes for Enhanced Surface Properties. In: AIP Conference Proceedings: 19th International Esaform Conference On Material Forming (ESAFORM 2016) , 27–29 April 2016 , Nantes, France. pp. 1-6., 1769 (030004). ISBN 978-0-7354-1236-1

A. R. M., Rosdzimin and S. M., Zuhairi and C. S. N., Azwadi (2010) Simulation Of Mixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. Razak, J. and Mohamad, N. and Mahamood, M. A. and Jaafar, R. and Othman, I. S. and Ismail, M. M. and Tee, L. K. and Ramli, Junid and Mustafa, Z. (2019) On the preparation of EPDM-g-MAH compatibilizer via melt-blending method. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5424 -5440. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. S. H. M., Yasir and N. M. Z. N., Mohamed and A. Q., Basri (2019) Development of framework for armoured vehicle assembly line efficiency improvement by using simulation analysis: Part 1. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-13., 469 (012090). ISSN 1757-899X

AL-Amri, Mohammed Amer Omar and Razali, Muda (2021) Development of a microcontroller-based gas detection system using wireless sensor network. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Aainaa Hazwani, Mohd Hashim (2009) The development of embedded low-pass filter for vibration control of a flexible manipulator. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Aainaa Izyan, Nafsun (2008) Product optimization in vinyl acetate monomer process using model predictive control. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ab Rahim, M. F. and Jaafar, A. A. and Taha, Z. and Rizalman, Mamat (2020) Simulation study on the effect of fuel injection and air intake boundary setup on the brake torque response by using comprehensive vehicle model for natural gas vehicle (NGV). In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-10., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Ab Rahman, Nur Naajihah and Nafrizuan, M. Y. and Zainal Abidin, Nuril Aqilah (2022) Investigation of the performance of PID control scheme for linear conveyor system of manufacturing shopfloor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 1-7. ISSN 2637-0883. (Published)

Ab Rashid, Mohd Fadzil Faisae (2013) Modelling and optimization of assembly line balancing with multi-resource constraints. (Unpublished)

Ab Rashid, Mohd Fadzil Faisae and Nik Mohamed, Nik Mohd Zuki and Romlay, Fadhlur Rahman Mohd and Razali, Akhtar Razul and Asmizam, Mokhtar (2018) Modeling and optimization of multi-holes drilling path using Particle Swarm Optimization. , [Research Report: Research Report] (Unpublished)

Ab Rashid, Mohd Fadzil Faisae and Razman, Mat Tahar and Nik Mohamed, Nik Mohd Zuki and Rose, Ahmad Nasser Mohd and Baharom, Mohamad Zairi (2017) Modelling and optimization of assembly line balancing with multi-resource constraints. , [Research Report: Research Report] (Unpublished)

Abbas, A. Wahab and N. F., Abdullah and Mohd Azri Hizami, Rasid (2019) Commutator fault detection of brushed dc motor using thermal assessment. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018; Universiti Malaysia Pahang , 31 October 2018 , UMP Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Abbas, Abdul Wahab and Mohd Azri Hizami, Rasid (2020) Characterization of brushed DC motor with brush fault using thermal assessment. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-10., 788 (012095). ISSN 1757-8981

Abbas, Mohammed Ausama Al-Sarraf (2017) Development of sugar palm fibre reinforced thermoplastic polyurethane composites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abbas, Shabudin and Mohd Jamil Mohamed, Mokhtarudin and Payne, Stephen J. and Nik Abdullah, Nik Mohamed (2019) Investigation of the capillary effects toward brain tissue poroelastic properties using asymptotic expansion homogenization. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4..

Abbas, Shabudin and Mohd Jamil Mohamed, Mokhtarudin and Stephen, Payne and Nik Abdullah, Nik Mohamed (2018) Application of asymptotic expansion homogenization for vascularized poroelastic brain tissue. In: The International Conference on Mathematics: Pure, Applied and Computation (ICOMPAC 2018) , 20 October 2018 , Hotel Majapahit, Surabaya, Indonesia. pp. 1-6.. (Unpublished)

Abd Anasghaneem, Abd Aziz and Juliawati, Alias (2022) Performance of graphene as the corrosion inhibitor of magnesium alloy for automotive application. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 218..

Abd Azrin Firdaus, A Rahim (2008) Line followers robot using PID controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abd Faiz, Muhammad (2010) Effect of abrasive tools on surface finishing when grinding mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Halim, Abdullah @ Shafei (2008) Carbon dioxide (CO2) laser cut quality of acrylic using different feed rate and constant power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Rahman, Zulhishamuddin and Mohamed Suffian, Reza and S. N., Aqida and Mohd Rashidi, Maarof (2017) Microstructural Evolution and Phase Transformation in Laser Cladding of Cr and Mo Powder on Grey Cast Iron: Mixture Design of Experiment (DOE). Materials Research Ibero-american Journal of Materials. pp. 1-7. ISSN ISSN 1516-1439 / ISSN 1980-5373. (Published)

Abd Rashid, Abd Aziz and Anbese, Yohannes Tamirat and Hagos, F. Y. and Heikal, Morgan R. and Firmansyah, F. (2017) Characteristics of Early Flame Development in a Direct-Injection Spark-Ignition CNG Engine Fitted with a Variable Swirl Control Valve. Energies, 10 (7). pp. 1-16. ISSN 1996-1073 . (Published)

Abdalla, Ahmed N. and Awad, Omar I. and Tao, Hai and Ibrahim, Thamir K. and R., Mamat and Hammid, Ali Thaeer (2019) Performance and emissions of gasoline blended with fusel oil that a potential using as an octane enhancer. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (8). pp. 931-947. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Abdalla, Ahmed N. and R. A., Bakar and Tao, Hai and Ramasamy, D. and K., Kadirgama and Fooj, Benedict and Tarlochan, F. and Sivaraos, S. (2020) Effect of swirl at intake manifold on engine performance using ethanol fuel blend. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (1). pp. 73-88. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Abdalla, Ahmed N. and Tao, Hai and Bagaber, Salem Abdullah and Obed M., Ali and Kamil, Mohammed and Ma, Xiao and Awad, Omar I. (2019) Prediction of emissions and performance of a gasoline engine running with fusel oil–gasoline blends using response surface methodology. Fuel, 253. pp. 1-14. ISSN 0016-2361. (Published)

Abdelillah, Abed Belarbi and M'hamed, Beriache and Nor Azwadi, Che Sidik and Rizalman, Mamat (2021) Experimental investigation on controlled cooling by coupling of thermoelectric and an air impinging jet for CPU. Heat Transfer Research, 50 (3). pp. 1-2. ISSN 1064-2285(Print); 2162-6561(Online). (Published)

Abdolbaqi, Mohammed Khdher (2017) Heat transfer enhancement of bioglycol/water based TiO2 and SiO2 nanofluids in a flat tube with twin twisted tapes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdul Adam, Abdullah and Amir, Khalid and N., Jaat and A., Sapit and A., Razali and Bukhari, Manshoor and Izzuddin, Zaman (2015) Performance and Emissions Characteristics of Crude Jatropha Oil Biodiesel Blends in a Diesel Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2447-2457. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Abdul Adam, Abdullah and M. Akmal, Adzmi and Afif, Naqiuddin (2018) Combustion characteristics of biodiesel blended with Al2O3 and SiO2 nanoparticles. In: 3rd Automotive Innovation And Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Indera Mahkota, Kuantan. pp. 1-11.. (Unpublished)

Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2015) Analysis of Combustion Characteristics of Waste Plastic Disposal Fuel (WPDF) and Tire Derived Fuel (TDF). Applied Mechanics and Materials, 773 (774). pp. 600-604. ISSN 1662-7482. (Published)

Abdul Adam, Abdullah and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin and Herzwan, Hamzah and Mohd Fahmi, Othman and Mrwan, Anes Abdulla G. (2017) Analysis of Combustion Characteristics, Engine Performance and Exhaust Emissions of Diesel Engine Fueled with Upgraded Waste Source Fuel. International Journal of Hydrogen Energy, 42 (28). pp. 17993-18004. ISSN 0360-3199. (Published)

Abdul Adam, Abdullah and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin and Mohd Herzwan, Hamzah and Mohd Fahmi, Othman (2016) Analysis of Combustion Characteristics and Emissions of Diesel Engine Fueled With Waste Source Fuel. In: 4th European Conference on Renewable Energy Systems (ECRES 2016) , 28-31 August 2016 , Istanbul, Turkey. pp. 1-6.. (Unpublished)

Abdul Adam, Abdullah and R., Mamat and Yatsufusa, Tomoaki (2014) Analysis of Diesel Spray Droplets Behavior using Shadowgraph Technique Images. In: International Conference on Optoelectronics Information Processing (ICOIP2014) , 21-21 June 2014 , Moscow, Rusia. pp. 1-6..

Abdul Fattah, Mohd Tahir and S. N., Aqida (2017) An Investigation of Laser Cutting Quality Of 22MnB5 Ultra High Strength Steel Using Response Surface Methodology. Optics & Laser Technology, 92. pp. 142-149. ISSN 0030-3992. (Published)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong , Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification using the Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Ghaffar, Abdul Rahman and Kong, K. K. and Z., Ismail and Chong, W. T. (2013) Determination of Vibration Borne Stress in a Pipeline Using Fluid Structure Interaction. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Z., Ismail and Kong, K. K. and Ong, Zhi Chao and Noroozi, Siamak and Chong, W. T. (2014) Impact Force Identification With Pseudo-Inverse Method on a Lightweight Structure for Under-Determined, Even-Determined and Over-Determined Cases. International Journal of Impact Engineering, 63. pp. 52-62. ISSN 0734-743X. (Published)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Chong, Wen Tong and Noroozi, Siamak (2013) Impact Force Identification by Using Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong, Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification Using the Modal Transformation Method in Collocated and Noncollocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Hadi, Abd Majid (2007) Modelling and fabrication of cylinder head for single cylinder two stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Abd Majid (2010) Optical study of ethanol gasoline blends with or without heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Shamsul Kamar (2012) Design and development of motoraise grinding valve for motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Haffizh, Zulkifli (2013) Investigation the effect of cationic surfactant on heat transfer performance in heat exchanger. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Hafiz, Mohamad (2007) Design and development of autonomous guided vehicle (AGV). Faculty of Mechanical Engineering, University Malaysia Pahang.

Abdul Haleem, Habeeb Mohamed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed and Mohamad Heerwan, Peeie (2020) Rain classification for autonomous vehicle navigation : A support vector machine approach. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 74-80. ISSN 2637-0883. (Published)

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Effect of Temperature on Heat Transfer Coefficient of Titanium Dioxide in Ethylene Glycol-based Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1367-1375. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Investigation of Al2O3 Nanofluid Viscosity for Different Water/EG Mixture Based. Energy Procedia, 79. pp. 354-359. ISSN 1876-6102 . (Published)

Abdul Latif Aizat, Mohamad Haniff (2008) Speed control of DC motor using pole placement controller implementation with PLC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Muhaimin, Aris (2013) Experimental investigation of the minimum quantity lubrication in end-milling of AA6061T6 by coated carbide tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Muiz, Jaafar (2013) Experiment and analysis of motocycle exhaust design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Ismail and A. K., Ariffin and Zulkifli, Mohd Nopiah (2004) A Delete Element-based Evolutionary Structural Optimization and Re-domain Algorithm. In: The 5th Regional Seminar on Computational Mechanics and Numerical Analysis , 4-5 June 2004 , Acheh, Indonesia. . (Unpublished)

Abdul Rahim, Asas (2010) Optimization of electrical discharge machine on mild steel AISI 1020 by using grey relational analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahim, M. F. Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach. , [Research Report: Research Report] (Unpublished)

Abdul Rahman, Mohamad (2013) Simulation of mini hydro power based on river configuration at river upstream. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and Imran, Anwar and Sharidan, Shafie (2016) Radiation Effect on MHD Stagnation-Point Flow of a Nanofluid over a Nonlinear Stretching Sheet with Convective Boundary Condition. Heat Transfer Research, 47 (9). pp. 797-816. ISSN 1064-2285(Print); 2162-6561(Online). (Published)

Abdul Rahman, Mohd Sabri (2010) Spray simulation of hydrogen fuel for spark ignition engine using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Wahab, Hashmi and Mali, Harlal Singh and Meena, Anoj and Khilji, Irshad Ahamad and Chilakamarry, Chaitanya Reddy and Siti Nadiah, Mohd Saffe (2022) Experimental investigation on magnetorheological finishing process parameters. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1892-1898., 48 (Part 6). ISSN 2214-7853

Abdul Wahab, Hashmi and Mali, Harlal Singh and Meena, Anoj and Khilji, Irshad Ahamad and Mohammad Farukh, Hashmi and Siti Nadiah, Mohd Saffe (2022) Machine vision for the measurement of machining parameters: A review. Materials Today: Proceeding, 56 (4). pp. 1939-1946. (Published)

Abdul Wahab Hashmi, Hashmi and Harlal Singh Mali, Harlal Singh and Anoj Meena, Anoj and Khilji, Irshad Ahamad and Mohammad Farukh, Hashmi and Siti Nadiah, Mohd Saffe (2022) Artificial intelligence techniques for implementation of intelligent machining. Materials Today: Proceeding, 56 (4). pp. 1947-1955. ISSN 2214-7853. (Published)

Abdul Zarif, Abdul Malek (2012) Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul wahid, Arman and Hagos, F. Y. and Abdul Adam, Abdullah and Rizalman, Mamat and Abd Rashid, A. Aziz (2019) Syngas production through steam and CO2 reforming of methane over ni-based catalyst - technical review. In: Energy Security And Chemical Engineering Congress (ESCHE) 2019 , 17 - 19 Julai 2019 , Parkroyal Resort, Penang. . (Unpublished)

Abdulbari, Hayder A. and Jaber, Aqeel S. and Shalash, Nadheer A. and Abdalla, Ahmed N. (2020) Garra Rufa‐inspired optimization technique. International Journal of Intelligent Systems, 35 (-). pp. 1831-1856. ISSN 08848173 (Print); 1098-111X (Online). (Published)

Abdulhadi, Hassan A. and Aqida, Syarifah N. and Ismail, Izwan (2019) Tool Failure in Die Casting. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, pp. 1-11. ISBN 978-0-12-803581-8

Abdulhadi, Hassan A. and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2017) Fatigue Mechanical Behavior of (PMMA) Poly(methacrylate) Under Shot Peening Treatment. Journal of Computational and Theoretical Nanoscience, 14 (6). pp. 2927-2930. ISSN 1546-1955 (Print); ISSN 1546-1963 (Online). (Published)

Abdulhadi, Hassan Abdulrssoul (2017) Thermal wear behaviour of H13 tool steel in die casting process. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abdulhadi, Hassan Abdulrssoul and S. N., Aqida and Izwan, Ismail and M., Ishak and Mohammed, Ghusoon R. (2017) Thermally-Induced Crack Evaluation in H13 Tool Steel. Metals, 7 (11). pp. 475-485. ISSN 2075-4701. (Published)

Abdulkarim Abdulrahman, Mohamed Suliman and Ruzinah Isha, Isha and Mazrul Nizam, Abu Seman and Abdul Latif, Ahmad (2020) Synthesis and characterization of TiO2 and palm oil fiber ash hybrid photocatalysts for water pretreatment. Maejo International Journal of Energy and Environmental Communication, 2 (3). pp. 1-10. ISSN 2673-0537. (Published)

Abdullah, N. A. Z. and Asri, M. N. A. M. and M. S. M., Sani (2022) Strategies of finite element modeling for spot welded joints and its modal correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9543-9550. ISSN 2180-1606. (Published)

Abdullah, N. A. Z. and Brapakaran, P. and M. S. M., Sani and Marcel, M. W. and Agung, E. H. (2020) Investigation on the dynamic properties of propeller structure with different number of blades. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology , 29-30 August 2019 , Malahayati University, Lampung, Indonesia. pp. 1-11., 807 (012035). ISSN 1757-8981 (Print), 1757-899X (Online)

Abdullah, Z. and Mohamad Heerwan, Piee and I M, Izhar and M A, Zakaria (2020) Study the influence of distance in Artificial Potential Field (APF) for Autonomous Emergency Braking System (AEB) on longitudinal motion. IOP Conf. Series: Materials Science and Engineering, 1068 (012015). pp. 1-10. ISSN 1757-8981 (Print) 1757-899X (Online). (Published)

Abdullah, Z. and Peeie, M. H. and Zakaria, M. A. and Ishak, M. I. and Shahrom, M. A. and Kujunni, B. (2022) Motion planning and tracking trajectory of an autonomous emergency braking pedestrian (AEB-P) system based on different brake pad friction coefficients on dry road surface. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 10002 -10013. ISSN 2180-1606. (Published)

Abdullah Shariffudin, Mohamad (2009) Energy balance study for 4 stroke gasoline engine analyses. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdulqader Al-Maamari, Azzat Esam (2020) Study on the mechanical and wear properties of Mg/SiC/Gr hybrid metal matrix composite. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Abid Abbas, Mohamed Arifin (2013) Analysis of propellers for micro hydro power for domestic and comercial loads. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abu, Mohd Yazid Bin (2019) Develop effective decision making for remanufacturing automotive components. , [Research Report: Research Report] (Unpublished)

Abu Jafar, Md Muzahid and Md. Abdur, Rahim and Saydul Akbar, Murad and Syafiq Fauzi, Kamarulzaman and Md Arafatur, Rahman (2021) Optimal safety planning and driving decision-making for multiple autonomous vehicles: A learning based approach. In: 2021 Emerging Technology in Computing, Communication and Electronics (ETCCE) , 21-23 Dec. 2021 , Dhaka, Bangladesh. pp. 1-6.. ISBN 978-1-6654-8364-3 (Online); 978-1-6654-8365-0(PoD)

Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman and Md Arafatur, Rahman (2021) Comparison of PPO and SAC Algorithms towards decision making strategies for collision avoidance among multiple autonomous vehicles. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan. pp. 200-205.. ISBN 21136432

Achmad, Hendriyawan and Priyandoko, Gigih and Rosmazi, Rosli and Mohd Razali, Daud (2017) Tele-operated mobile robot for 3D visual inspection utilizing distributed operating system platform. International Journal of Vehicle Structures & Systems, 9 (3). pp. 190-194. ISSN 0975-3060 (Print); 0975-3540 (Online). (Published)

Adam, A. Y. and A. N., Oumer and G., Najafi and M., Ishak and F., Basrawi and Aklilu, T. B. (2019) State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers. Journal of Thermal Analysis and Calorimetry. pp. 1-30. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak (2016) Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangers. In: National Conference for Postgraduate Research (NCON-PGR) , 24-25 September 2016 , Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Unpublished)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak and R., Mamat and Abdul Adam, Abdullah (2018) Thermal and Fluid Dynamic Analysis of Compact Fin-and-Tube Heat Exchangers for Automotive Applications. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (05019). ISSN 2261-236X

Adam Shariff Adli, Aminuddin and Mohd Kamal, Mohd Nawawi and N. M. Zuki, N. M. (2014) Analytic Network Process Model for Sustainable Lean and Green Manufacturing Performance Indicator. In: AIP Conf. Proc.: Statistics and Operational Research International Conference (SORIC 2013) , 3–5 December 2013 , Sarawak. pp. 32-38., 1613. ISBN 9780735412491

Addepalli, Phanindra and Sawangsri, Worapong and Saiful Anwar, Che Ghani (2021) A qualitative study on cutting tool materials for bone surgeries. In: Materials Today: Proceedings; 2021 International Conference on Materials and System Engineering, ICMSE 2021 , 7-8 May 2021 , Karnataka. pp. 2457-2462., 47 (10). ISSN 2214-7853

Addie Irawan, Hashim (2012) Force and impedance control for hydraulically driven hexapod robot walking on uneven terrain. PhD thesis, Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

Addie Irawan, Hashim and A. R., Razali and Wan Faizal, Wan Ishak and Mohd Rizal, Arshad and Tan, Yee Yin (2015) Development of Hexaquad Robot: Modeling and Framework. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17506-17513. ISSN 1819-6608. (Published)

Addie Irawan, Hashim and M. F., Abas and A., Hazha and N. H., Nordin (2008) Microstepping Drives Approaches to Improve Machine Carriage/ Conveyor Movement. In: Proceedings of the 4th International Colloquium on Signal Processing and its Applications (CSPA 2008) , 7- 9 March 2008 , Kuala Lumpur. pp. 587-590..

Addie Irawan, Hashim and Nonami, Kenzo and Mohd Razali, Daud (2013) Optimal Impedance Control with TSK-type FLC for Hard Shaking Reduction on Hydraulically Driven Hexapod Robot. In: Autonomous Control Systems and Vehicles. Intelligent Systems, Control and Automation: Science and Engineering, 65 . Springer, Japan, pp. 223-236. ISBN 978-4-431-54275-9 (print); 978-4-431-54276-6 (online)

Addie Irawan, Hashim and et, al. (2015) Proceeding of Colloquium on Robotics, Unmanned Systems and Cybernetics 2014. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia. ISBN 978-967-0691-42-8

Addy Firdaus, Omar (2012) Investigation of mechanical properties of welded aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adel Mohammed, Al-Dhahebi and Ahmad Kadri, Junoh and Zamri, Mohamed and Wan Zuki Azman, Wan Muhamad (2017) A computational approach for optimizing vehicles' interior noise and vibration. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (4). pp. 4690-4703. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Adhreena, M S N A and Z. M., Hafizi and Vorathin, E. and N., Zahir (2023) A Study Of Fiber Bragg Grating Temperature Sensor For Under Water Temperature Monitoring. Journal of Engineering and Technology (JET), 14 (1). pp. 237-244. ISSN 2180-3811. (Published)

Adnan, M. Husein and R. A., Bakar and K., Kadirgama and K. V., Sharma (2013) Experimental Measurements of Nanofluids Thermal Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 850-863. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Adnan M., Husein and Dawood, H. K. and R. A., Bakar and K., Kadirgama (2017) Numerical Study on Turbulent Forced Convective Heat Transfer Using Nanofluids TiO2 in an Automotive Cooling System. Case Studies in Thermal Engineering, 9. pp. 72-78. ISSN 2214-157X. (Published)

Adnan Mohammed, Hussein (2014) Heat transfer enhancement using nanofluids in the automotive cooling system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Adnan Mohammed, Hussein and K. V., Sharma and R. A., Bakar and K., Kadirgama (2013) Heat Transfer Enhancement With Nanofluids – A Review. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 452-461. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Adnan Mohammed, Hussein and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman (2017) Heat Transfer Enhancement Using Hybrid Nanoparticles in Ethylene Glycol Through a Horizontal Heated Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4183-4195. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Adnun , M. Hussein and K., Kadirgama and D., Rarnasarny and R. A., Bakar (2017) Heat Transfer Enhancement with Nanofluids for Automotive Cooling. In: Engineering Applications of Nanotechnology: From Energy to Drug Delivery (Topics in Mining, Metallurgy and Materials Engineering). Springer, pp. 71-100. ISBN 978-3-319-29759-0

Adzmi, M. A. and Abdul Adam, Abdullah and Abdullah, Z. and Mrwan, Anes G. (2019) Effect of Al2O3 and SiO2 metal oxide nanoparticles blended with POME on combustion, performance and emissions characteristics of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6859-6873. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Adzuieen, Nordin and M. Amin, A Majid (2013) Analysis of Carbon Dioxide Emission of Gas Fueled Cogeneration Plant. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10..

Afifuddin Arif, Shihabuddin Arip and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2024) Object Detection for Safety Attire Using YOLO(You Only Look Once). Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 37-51. ISSN 2289-7895. (Published)

Afiq, Hamdan (2008) Numerical analysis of in-cylinder flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afiq Zainorul, Zainal (2009) Development of 1st and 2nd order tool life model when machining modified AISI P20 tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afiqah, R. Radzi and Hashim, R. Bokhari and Abdul Rahimi, Abdul Rahman and K. Ayer, Steven (2019) Key Attributes of Change Agents for Successful Technology Adoptions in Construction Companies: A Thematic Analysis. ASCE International Conference on Computing in Civil Engineering 2019. pp. 430-437. (Published)

Afrouzeh, Mohsen and Konukman, Ferman and Musa, Rabiu Muazu and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman (2022) Kinematic variables defining performance of basketball free-throw in novice children : An information gain and logistic regression analysis. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 949-956., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Afzam, Zulkepli and Hassan, Ibrahim and Azri, Alias and F., Basrawi (2016) Review on the Recent Developments of Photovoltaic Thermal (PV/T) and Proton Exchange Membrane Fuel Cell (PEMFC) Based Hybrid System. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8., 74 (00019). ISSN 2261-236X

Afzam, Zulkepli and Lim, Wei Yong and Mohd Yusof, Taib and Zafri, Azran and F., Basrawi (2016) Analysis on the Performance of Copper Indium Gallium Selenide (CIGS) Based Photovoltaic Thermal. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-5., 38 (02004). ISSN 2261-236X

Aguk Zuhdi, Muhammad Fathallah (2011) Design and simulation of a single cylinder high speed spark ignition linear engine with spring system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rosli).

Agung, E. H. and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Bachtiar, Dandi and Cionita, Tezara and Jamiluddin, Jaafar (2018) Water Absorption Behaviour and Mechanical Performance of Pineapple Leaf Fibre Reinforced Polylactic Acid Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5760-5774. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Agus, Nugroho (2023) Performance enhancement of residential air conditioning system using fal2o3 and tio2-polyolester nanolubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rizalman, Mamat).

Ahamad Khilji, Irshad and Siti Nadiah, Mohd Saffe and Reddy Chilakamarry, Chaitanya and Siti Aishah, Rusdan (2022) The crashworthiness performance of the energy-absorbing composite structure—A review. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering (LNME) . Springer, Singapore, Singapore, pp. 637-650. ISBN 978-981-19-2889-5 (Print); 978-981-19-2890-1(Online)

Ahamed, J. U. and Raiyan, M. F. and Hossain, MD. S. and M. M., Rahman and Salam, B. (2016) Production Of Biogas From Anaerobic Digestion Of Poultry Droppings And Domestic Waste Using Catalytic Effect Of Silica Gel. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 2180-1606. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad, Asnul Hadi and Ishak, M. and Rashidi, Maarof Mohd and Romlay, Fadhlur Rahman Mohd and Zakri, Ghazali and Ahmad Shah, Luqman Hakim (2018) Microstructure and mechanical characterization of semisolid metal components for wrought aluminium alloys. , [Research Report: Research Report] (Unpublished)

Ahmad, Asnul Hadi and Ishak, M. and Rashidi, Maarof Mohd and Zakri, Ghazali (2019) Investigation of thixoforming process to enhance mechanical properties for automotive components production. , [Research Report: Research Report] (Unpublished)

Ahmad, Asnul Hadi and Leman, Z. and Azmir, M. A. and Muhammad, Khairul Fikri and Wan Harun, Wan Sharuzi and Alias, J. and Alias, A. B. S. (2009) Optimization of warpage defect in injection moulding process using ABS material. In: 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009 , 25 - 26 May 2009 , Bundang, Indonesia. pp. 470-487. (5072032). ISSN 2376-1172 ISBN 978-076953648-4

Ahmad, Asnul Hadi and Zakri, Ghazali and Romlay, Fadhlur Rahman Mohd and Nik Mohamed, Nik Mohd Zuki and Rashidi, Maarof Mohd and Ishak, M. (2019) Development of a high temperature viscometer for semisolid metal processing. , [Research Report: Research Report] (Unpublished)

Ahmad, Mohd Ashraf and Ramli, Mohd Syakirin and Nasrul, Salim Pakheri and Abd Ghani, N. M. and Raja Ismail, R. M.T. (2011) Experimental investigations of command shaping techniques for anti-sway control of double pendulum gantry crane system. , [Research Report: Research Report] (Unpublished)

Ahmad, Salman and Razman, Mat Tahar and Cheng, Jack Kie and Yao, Liu (2017) Public acceptance of residential solar photovoltaic technology in Malaysia. PSU Research Review, 1 (3). pp. 242-254. ISSN 2398-4007. (Published)

Ahmad Aiman, Ramlan (2012) Experimental and finite element evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Alif, Ahmad Adam (2013) Predicting crack pattern on archimedes screw runner blade of micro hydro power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Asyraf, Ramli (2010) Theoretical analysis of solar water heating system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Bakri, Abdul Aziz (2009) Design and development of vacuum fruit frying machine for SMI and SME application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Basirul Subha, Alias and Thegaraju, D. and Sharma, K. V. (2013) Effect of Carbon Nanotube Dispersions to the Palm Oil Diesel-Biodiesel Blend Properties. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Ahmad Faathir, Che Mohd Zulkifli (2017) Building information modelling (BIM) mechanical systems plumbing and HVAC. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Fadzil, Mohamad (2009) Effects of polarity parameter on the machining of tool steel workpiece using electric discharge machining (EDM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Fadzil, Sharol and Amir, Abdul Razak and Zafri Azran, Abdul Majid and Muhammad Amirul Azwan, Azmi and Muhammad Amir Syahiran, Muhammad Tarminzi (2020) Evaluation on the Performance of Cross-Matrix Absorber Double-Pass Solar Air Heater (CMA-DPSAH) with and without Thermal Energy Storage Material. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 37-49. ISSN 2289-7879. (Published)

Ahmad Fahmy, Jusoh (2020) Characterisation of kenaf fibre composite trapezoid sandwich structure based on corrugated core. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mat Rejab, Moho Ruzaimi).

Ahmad Fakhri, Ab. Nasir (2011) Peningkatan halaju suapan maksimum penginterpolasi CNC dedenyut rujukan menggunakan pengaturcaraan selari. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Fakhri, Ab. Nasir and Ahmad Shahrizan, Abdul Ghani and Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed and Ahmad Najmuddin, Ibrahim (2019) Automated Face Detection Using Skin Color Segmentation and Viola-Jones Algorithm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 58-63. ISSN 2637-0883. (Published)

Ahmad Faris, Zulkifli (2009) Automatic room temperature control with security system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fatihy, Mohd Subbri (2012) Development of autogrease electric motor’s bearing system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fauzi, Fudzin and Ainul Akmar, Mokhtar and Mohd Amin, Abd Majid and Azizul Qayyum, Basri (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012004). ISSN 1757-899X

Ahmad Firdaus, Ilias and Mohd Azrul Hisham, Mohd Adib and Muhammad Nor Hakim, Hassan and Muhammad Mirza, Mustapah and Muhammad Alif Aiman, Jamaludin and Sheh Hong, Lim (2021) ReFlex gamification for cerebral palsy kids. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Ahmad Fitri, Yusop (2015) Investigation of particulate matter and combustion characteristics of a diesel engine fueled with palm oil methyl ester and diesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz (2013) PM Emission of Diesel Engines Using Ester-Ethanol-Diesel Blended Fuel. Procedia Engineering, 53. pp. 530-535. ISSN 1877-7058. (Published)

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah and Amir, Aziz (2014) Comparative Study of Particulate Matter (PM) Emissions in Diesel Engine Using Diesel-Methanol Blends. Applied Mechanics and Materials, 465-46. pp. 1255-1261. ISSN 1662-7482. (Published)

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Ali, Obed M. (2014) Effects of Particulate Matter Emissions of Diesel Engine using Diesel–Methanol Blends. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 959-967. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Shafiq, Suhaimi (2014) Effects of the Inlet Velocity Profiles on the Prediction of Velocity Distribution inside an Electrostatic Precipitator (ESP). International Journal of Computer and Electrical Engineering, 6 (1). pp. 64-66. ISSN 1793-8163. (Published)

Ahmad Fitri, Yusop and R., Mamat and Yusaf, Talal and G., Najafi and Mohd Hafizil, Mat Yasin and Akasyah, M Khathri (2018) Analysis of Particulate Matter (PM) Emissions in Diesel Engines Using Palm Oil Biodiesel Blended with Diesel Fuel. Energies, 11 (5). pp. 1-25. ISSN 1996-1073. (Published)

Ahmad Hazury, Hamid (2010) Design of a mechanism to mix biogas with air in compression internal combustion engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hisyam, Mohamad (2010) Design and development of portable pineapple peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Ikmal 'Akif, Abdul Khalil (2013) Design and fabrication of smoke piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Imran, Mohd Thaim and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2023) Smart Glove for Sign Language Translation. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 80-87. ISSN 2289-7895. (Published)

Ahmad Kamil, Fadir (2009) Power quality analysis based on harmonic distortion level in FKEE lab, UMP. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Khairul Hafizi, Wahab (2009) Effects of punching force on cutting tool in forming process using FEA approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Makhzan, Ahmad Kamal (2010) Modification of existing water turbine system for application at local river. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Najmuddin, Ibrahim (2013) Experimental development of stiffness-variable foot sole mechanism for bipedal robots. Masters thesis, Ibaraki University, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Najmuddin, Ibrahim and Pang, Oh Yi and Yap, Wong Kien and Ahmad Shahrizan, Abdul Ghani (2018) Design of fast climbing robot for tree with multiple diverging branche. In: Lecture Notes in Mechanical Engineering. Springer Nature Singapore, pp. 395-402. ISBN 978-981-13-8322-9

Ahmad Nasiruddin, Ab Razak (2014) Robust and reliable dual the classification system with error compensation module. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Nasser, Mohd Rose and Mohd Fadzil Faisae, Ab. Rashid and Nik Mohd Zuki, Nik Mohamed and Muhammad Aiman Safwan, Jubri (2021) The implementation of lean manufacturing and ergonomics in small medium enterprise – Case study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012057). ISSN 1757-8981

Ahmad Nasser, Mohd Rose and N. M. Z., Nik Mohamed and M. F. F., Ab Rashid and Hafizzudin, Mohd Noor and Alias, Mohd (2019) Improving productivity using value stream mapping (VSM) - a case study. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-5.. (Unpublished)

Ahmad Nazmi, Mohd Rose (2010) Performance of diamond tool in machining titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nor Kasruddin, Nasir and Normaniha, Abd Ghani and Mohd Ashraf, Ahmad (2012) A Novel Hybrid Spiral-Dynamics Bacterial-Foraging Algorithm for Global Optimization with Application to Control Design. In: Workshop on Computational Intelligence (UKCI), 2012 12th UK , 5-7 September 2012 , Edinburgh, United Kingdom. pp. 1-7..

Ahmad Rasdan, Ismail (2010) Influence of Wet-Bulb Globe Temperature (WBGT) Towards Workers' Performance: An Anova Analysis. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 435-441.. ISBN 978-967-5080-9501 (CD ROM)

Ahmad Rasdan, Ismail (2010) A Review Onwhole Body Vibrations Towards Human. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail and Isa, Halim and Hambali, Arep and Seri Rahayu, Kamat and Rohana, Abdullah and Abdul Rahman, Omar (2014) Development of a Decision Support System for Analysis and Solutions of Prolonged Standing in the Workplace. Safety and Health at Work, 5 (2). pp. 97-105. ISSN 2093-7911. (Published)

Ahmad Rasdan, Ismail (2010) Case Study Of ISO/TS16949 Application In Automotive Industry. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2014) Establishment of drivers' comfort through automotive ergonomics. Auto Inexss (7). ISSN 1985-8434

Ahmad Rasdan, Ismail and Karagaratnana, Shashi Kumar S. A. and Rozli, Zulkifli and Baba, M. Deros and Mohd Nizam A., Rahman (2012) A review on thermal comfort assessment in Malaysian industries. Jurnal Teknologi (Sciences and Engineering), 59 (2). pp. 7-11. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ahmad Rasdan, Ismail and M.Z., Nuawi and N.F., Kamaruddin (2011) Comparative Study Of Whole-Body Vibration Exposure Between Train And Car Passengers: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 490-503. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Rasdan, Ismail and Siti Nur Atikah, Abdullah and Ahmad Adam, Abdullah and Ab Hamid, Mohd Rashid and Baba, M. Deros (2015) Relationship between thermal comfort and driving performance among Malaysian bus driver. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7406-7411. ISSN 1819-6608. (Published)

Ahmad Rasdan, Ismail and Siti Nur Atikah, Abdullah and Ahmad Adam, Abdullah and Ab Hamid, Mohd Rashid and Baba, M. Deros (2015) Relationship between thermal comfort and driving performance among Malaysian bus driver. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7406-7411. ISSN 1819-6608. (Published)

Ahmad Razlan, Yusoff and Syh Kai, Lim (2019) Microstructure and mechanical properties of boron sheet metal steels in hot press forming process with nanofluid as coolant. In: Reference Module in Materials Science and Materials Engineering. Elsevier, pp. 1-15. ISBN 978-0-12-803581-8

Ahmad Ridhauddin, Abdul Rauf and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Mohd Hafiz, Arzmi and Abdul Majeed, Anwar P. P. (2022) The classification of oral squamous cell carcinoma (OSCC) by means of transfer learning. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 386-391., 429. ISBN 978-303097671-2

Ahmad Safiuddin, Ahmad Saudi (2008) Design and development of hamsters cage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2018) Assembly Line Efficiency Improvement by Using WITNESS Simulation Software. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-11., 319 (012004). ISSN 1757-899X

Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2017) Production Layout Efficiency Improvement for Armoured Vehicle Assembly Line. International Journal of Information Research and Review, 4 (3). pp. 3810-3815. ISSN 2349-9141. (Published)

Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2017) Productivity and Efficiency Improvement Using Witness Simulation and Ergonomic Study in Automotive Assembly Line. In: The Proceedings of the 47th International Conference on Computers & Industrial Engineering (CIE47) , 11-13 October 2017 , Lisbon, Portugal. pp. 1-8. (132). ISSN 2164-8689

Ahmad Shahir, Jamaludin (2013) Development of fem model for high speed machining using small ball end milling processes. Masters thesis, Universiti Malaysia Sarawak (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Shahril Ashraf, Mohamed (2008) Modification of piston skirt design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shahrizan, Abdul Ghani and Ismail Mohd., Khairuddin and Muhammad Amirul, Abdullah and Ahmad Fakhri, Ab. Nasir and Jessnor Arif, Mat Jizat and Mohd. Azraai, Mohd. Razman and Muhammad Aizzat, Zakaria and Wan Hasbullah, Mat Isa and Anwar P. P., Abdul Majeed (2022) Enabling Industry 4.0 through Advances in Mechatronics. LNEE, 1 (1). Springer Singapore, Springer Link. ISBN 1876-1100

Ahmad Shahrizan, Abdul Ghani and Muhammad Daniel Naim, Zulkifflee (2022) Investigation on data acquisition accuracy for long range communication using RFM LoRa. In: 2022 8th International Conference on Control, Decision and Information Technologies, CoDIT 2022 , 17-20 May 2022 , Istanbul. pp. 320-325. (180591). ISBN 978-166549607-0

Ahmad Shahrul Amrie, Mohd Supri (2012) The study on the effect of laser power on kerf width for carbon dioxide laser cutting process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Shawal, Mohd Amin (2012) Design and fabrication of pesticide pump sprayer cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shazwi, Kamaruzaman (2008) Carbon Dioxide (CO2) laser cut quality of acrylic. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syafiq, Shiro (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syakir, Mohamad (2008) Energy audit for the UMP library and energy efficiency project proposal. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Syazwan, Ramli and F., Basrawi and Mohd Hazwan, Yusof and Oumer, A. N. and Nur Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat and Khairul, Habib and Ibrahim, Thamir Khalil (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7. ISSN 0737-3937 (Print) 1532-2300 (Online). (Published)

Ahmad Syazwan, Ramli and Firdaus, Basrawi and Daing Mohamad Nafiz, Daing Idris and Ahmmad Shukrie, Md Yudin and Thamir Khalil, Ibrahim (2017) A New Dewatering Technique for Stingless Bees Honey. In: 1st International Meliponine Scientific Conference, Convention & Carnival. , 16-18 May 2017 , Putrajaya, Malaysia. pp. 1-4.. (Unpublished)

Ahmad Yunus, Nasution and Mohd Ruzaimi, Mat Rejab and Siregar, J. P. and Ma, Quanjin (2023) Combination of frustra shapes with cross sections and trigger circles for crash box design to absorb energy. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Ahmad Zaifazlin, Zainordin and Priyandoko, Gigih and Zamri, Mohamed (2018) Performance Simulation Analysis for Magnetorheological Damper with Internal Meandering Flow Valve. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5511-5521. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Zaki, Zaimani (2012) Development hydrogen gas generator for dual fuel engine using yull brown method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2019) Adjustable Valve Semi Active Suspension System for Passenger Car. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6470-6481. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2018) Numerical Investigation of Continuous Damping of The Semi-Active Suspension System for Passenger Car. In: The International Conference on Recent Advances in Industrial Engineering and Manufacturing (ICRAIEM 2018) , 12-13 December 2018 , Penang, Malaysia. pp. 1-11..

Ahmed, Yassin Mustafa and Khidhir, Basim A. and Khairul Saleh, Mohamed Sahari and M., Ishak (2015) Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (4). pp. 660-665. ISSN 3159-0040. (Published)

Ahmed Mahmood, Raid and Ali, Omar M. and M. M., Noor (2020) Mechanical vapour compression refrigeration system: review part 1: environment challenge. International Journal of Applied Mechanics and Engineering, 25 (4). pp. 130-147. ISSN 1734-4492. (Published)

Ahmed Mostafa, Mohammed Ragab (2019) Investigation of adjustable valve of semi-active damper for improving ride comfort in a passenger car. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed Yousif Adam, Mohammed (2017) Effect of tube inclination angle on the thermal and fluid dynamic performance of flat tube heat exchanger. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmed Yousif Adam, Mohammed and A. N., Oumer and Azri, Alias and M., Ishak (2016) Effect of Vortex Generator on the Air-Side Thermal-Hydraulic Performance of Flat Tube Heat Exchangers. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 582-590..

Ahmmad Shukrie, Md Yudin (2012) Studies on the residence time distribution of solids in a swirling fluidized bed. Masters thesis, Universiti Teknologi Petronas (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azim, Arshad (2014) Experimental Investigation of Heat Transfer in a Bubbling Fluidized Bed for Geldart A And B Particles. In: 11th International Conference on Fluidized Bed Technology (CFB 2014) , 14-17 May 2014 , Beijing, China. pp. 1-7..

Ahmmad Shukrie, Md Yudin (2017) Performance characteristics of air distributor designs in a fluidized bed. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmmad Shukrie, Md Yudin and A., Saat and Mohamad Firdaus, Mohd Yasin (2020) Combustion characteristics of biogas flame from Palm Oil Mill Effluent (POME) at variable equivalence ratio. In: 5th International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB 2020) , 9-11 September 2020 , Kuala Lumpur, Malaysia. pp. 1-21.. (Unpublished)

Ahmmad Shukrie, Md Yudin and Oumer, A. N. and N. F. M., Roslan and Mohd Azlan, Zulkarnain (2020) Computational and experimental study on pressure drop in a fluidised bed with different air distributor designs. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 8043 -8051. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Air Distributor Designs for Fluidized Bed Combustors: A Review. Engineering, Technology & Applied Science Research, 6 (3). pp. 1029-1034. ISSN 1792-8036. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Improvement On Particulate Mixing Through Inclined Slotted Swirling Distributor In A Fluidized Bed: An Experimental Study. Advanced Powder Technology, 27 (5). pp. 2102-2111. ISSN 0921-8831. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2014) Characterization and Development of Fluidizing Velocity Profile of Sand Particles in Fluidized Bed Combustor (FBC). In: FB 20 , 11-12 Dec 2014 , Okayama University. . (Unpublished)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2016) Characterization and Development of Geldart’s Fluidizing Velocity Profile of Sand Particles for the Application in Fluidized Bed Combustor (FBC). In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 147-156. ISBN 978-981-10-0532-9 (Print); 978-981-10-0534-3 (Online)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2015) Heat Transfer of Alumina Sands in Fluidized Bed Combustor with Novel Circular Edge Segments Air Distributor. Energy Procedia, 75. pp. 1752-1757. ISSN 1876-6102. (Published)

Aida Azwa, A. Halim (2007) Development of projectile launcher for learning purpose. Faculty of Mechanical Engineering, University Malaysia Pahang,.

Aidil Redza, Khan and Mohd Faizal, Jamlos and Nurmadiha Osman, Osman and Muhammad Izhar, Ishak and Fatimah, Dzaharudin and You Kok, Yeow and Khairil Anuar, Khairi (2021) DSRC Technology in Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) IoT System for Intelligent Transportation System (ITS): A Review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 97-106. ISBN 978-981-33-4597-3

Aikhuele, Daniel O. and Akinosi, Olatunji A. and Faiz, Mohd Turan (2021) A Hybrid Fuzzy Model for the performance evaluation of Biomethane gas as a renewable energy source. Process Integration and Optimization for Sustainability, 5 (4). pp. 993-1002. ISSN 2509-4246. (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) An Interval Fuzzy-Valued M-TOPSIS Model for Design Concept Selection. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 374-384..

Aina Azliyana, Mohamad (2012) Simulation of auto –tuning pid controller for dc motor using Ziegler-Nichols method. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Aina Munirah, Ab Rasid and Muhammad Zuhaili, Suhaimi and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Mohd Hasnun Ariff, Hassan and Nasree, Najmi and Noor Azuan, Abu Osman and Rabiu Muazu, Musa (2023) A cluster analysis and artificial neural network of identifying skateboarding talents based on bio-fitness indicators. In: Innovation and Technology in Sports. Lecture Notes in Bioengineering; International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 - 15 November 2022 , Kuala Lumpur. 47 -56.. ISSN 2195-271X ISBN 978-981990296-5

Aina Najwa, Nadzri and Mohd Jamil, Mohamed Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke treatment: A conceptual modeling study. In: Proceedings - 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020. IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 2021 , 1-3 March 2021 , Virtual, Langkawi Island. pp. 303-308. (168430). ISBN 978-172814245-6

Aina Najwa, Nadzri and Mohd Jamil Mohamed, Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2022) Simulation of Craniectomy Size in Decompressive Craniectomy for Ischaemic Stroke. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 599-607.. ISBN 978-981-19-2890-1

Aina Najwa, Nadzri and Mohd Jamil Mohamed, Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke treatment: A computational study. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Aina Syafiza, Jamalulail (2013) To study and recommend measures to make fkm administration block be more energy efficient. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ainatul Mardiah, Ibrahim (2007) The design of an adaptive tuned vibration absorber. Faculty of Mechanical Engineering, University Malaysia Pahang.

Aini Rushda, Md Desa (2012) Effects of cutting tool coating on surface roughness in machining pre-hardened steel (p20). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Aisha, Muhammad and Mohammed Abdo, Hashem Ali and I H, Shanono (2020) Finite element analysis of a connecting rod in ANSYS: An overview. In: Finite Element Analysis of a connecting rod in ANSYS: An overview , 19-22 November 2019 , Pahang, Malaysia. pp. 1-17., 736 (22119). ISSN 1757-899X

Aishah, A. F. Q. A. and Ummu Kulthum, Jamaludin and Zainuriah, M. R. and Norhilda, A. K. (2019) Multiple linear regression model analysis in predicting fasting blood glucose level in healthy subjects. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-10., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Aishah, Abdul Aziz and Wan Muhammad Noor Sarbani, Mat Daud and Sorooshian, Shahryar (2019) Exploring quality influencing factors for frozen food industry. In: IOP Conference Series: Materials Science and Engineering; 4th International Conference on Ergonomics and 2nd International Conference on Industrial Engineering, ICE and ICIE 2019 , 27 - 28 August 2019 , Kuala Terengganu, Terengganu. pp. 1-6., 697 (1). ISSN 1757-8981

Aishah, Safi and F., Basrawi (2018) Evaluation of the wind pumped hydropower storage integrated flood mitigation system. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

Aishah, Safi and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Mohd, Nazani (2015) Electrical energy generation from Malaysia’s annual flood event by using pumped water storage - from crisis to opportunity. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

Aishah, Safi and Shahrani, Anuar and D. M. N., D. Idris and Ahmmad Shukrie, Md Yudin and F., Basrawi and Mohd, Nazani (2016) Modelling flood reservoir integrated with pumped hydropower storage for electricity production using HOMER. In: Symposium on Energy Systems 2016 (SES 2016) , 21 September 2016 , Pekan, Pahang. pp. 1-7.. (Unpublished)

Aishah, Safi and Shahrani, Anuar and D. M. N., D. Idris and F., Basrawi and Ahmmad Shukrie, Md Yudin and Mohd, Nazani (2016) Feasibility of Pumped Hydro Storage for Energy Production and Flood Mitigation in Pekan. International Journal of Advanced and Applied Sciences, 3 (5). pp. 39-43. ISSN 0973-4562(print); 0973-9769(online). (Published)

Aisyah, Jilani and Akhtar Razul, Razali (2018) Centrifugal pump performance characteristics for domestic application. MATEC Web of Conferences 225, 05011 (2018), 225 (05011). ISSN 2261-236X. (Submitted) (Submitted)

Aisyatul Azlin, Sitam (2014) Analyze extreme wind speed in peninsular Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Aizuddin, Abdul Rahim (2008) Dynamic modelling and control of mass spring system with large load uncertainty. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Aizzuddin, A. M. and Asrudin, A. A. and Taib, M. Y. and Azmi, W. H. (2022) Soil characteristic study to improve heat conductivity capability in ground heat exchanger. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 707 -719.. ISSN 2195-4356 ISBN 978-981-19-1457-7

Aizzuddin, A. M. and Taib, M. Y. and Azmi, W. H. (2021) Investigation of pipe materials and thermal conductivity of soil on the performance of ground heat exchanger operating under Malaysia climate. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-11., 1078 (012030). ISSN 1757-899X

Ajith, Gopi (2022) Performance modelling and analysis of a utility scale solar photovoltaic power plant in a tropical region. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Sudhakar, Kumarasamy).

Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Design and simulation of solar roof-top projects for an energy self-reliant university campus. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012013). ISSN 1757-8981 (Print), 1757-899X (Online)

Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Solar PV Microgrids Implementation model: A case study of Local Self Governments in the Indian State of Kerala. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-13., 1068 (012024). ISSN 1757-899X

Ajith, Gopi and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. (2021) Comparison of normal and weather corrected performance ratio of photovoltaic solar plants in hot and cold climates. Energy for Sustainable Development, 65. pp. 53-62. ISSN 0973-0826. (Published)

Akash Kumar, Shukla and Sudhakar, K. and Prashant, Baredar (2017) Recent Advancement in BIPV Product Technologies: A Review. Energy and Buildings, 140. pp. 188-195. ISSN 0378-7788. (Published)

Akasyah, M Khathri and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Mohd Hafizil, Mat Yasin (2014) Effect of Ambient Temperature on the Performance of a Diesel Engine Operating with Biofuel. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. .

Akasyah, M Khathri and R., Mamat and Abdul Adam, Abdullah and Gan, Leong Ming and Azri, Alias (2014) Effect of Compression Ratio on Compression Ignition Engine Performance Operating with Biofuel. In: International Conference On Automotive Innovation and Green Energy Vehicle , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8..

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel. Applied Mechanics and Materials, 660. pp. 452-456. ISSN 1662-7482. (Published)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) One-Dimensional Simulation of the Combustion Process in an Engine Cylinder with Ethanol. Applied Mechanics and Materials, 660. pp. 447-451. ISSN 1662-7482. (Published)

Akasyah, Mohd Khathri and Muhammad Yusri, Ismail and Abdul Adam, Abdullah and Rizalman, Mamat and Sutiman, . (2022) Performance, exhaust emissions and optimization using response surface methodology of a water in diesel emulsion on diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (1). pp. 1-12. ISSN 2289-7879. (Published)

Akhil, Vinayak and Muhammad Aizzat, Zakaria and K., Baarath (2023) A comprehensive review on different path planning methods for autonomous vehicles. Journal of Engineering and Technology (JET), 14 (2). pp. 1-10. ISSN 2180-3811. (In Press / Online First) (In Press / Online First)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Heim, Hans P. and Feldmann, Maik and Mariatti, M. (2019) Oxidative induction and performance of oil palm fiber reinforced polypropylene composites - effects of coupling agent and UV stabilizer. Composites Part A: Applied Science and Manufacturing, 125 (105577). ISSN 1359-835X. (Published)

Aklilu, T. B. and Kar, Kin Looi and A. N., Oumer and Khairul, Habib (2019) Thermoelectric Air-Conditioning System: Building Applications and Enhancement Techniques. International Journal of Air-Conditioning and Refrigeration, 27 (2). pp. 1-17. ISSN 2010-1333. (Published)

Akm Asif, Iqbal and Norfatihah, Ismail (2022) Mechanical properties and corrosion behavior of silica nanoparticle reinforced magnesium nanocomposite for bio-implant application. Materials, 15 (8164). pp. 1-11. ISSN 1996-1944. (Published)

Akram, A. and Hasanuddin, Iskandar and Nazaruddin, N. and Putra, R. and M. M., Noor (2019) Mechanical behavior of hybrid glass Fiber-Jute reinforced with polymer composite for the wall of the Acehnese boat 'Jalo Kayoh'. In: IOP Conference Series: Materials Science and Engineering, The 8th Annual International Conference (AIC) 2018 on Science and Engineering , 12-14 September 2018 , Aceh, Indonesia. pp. 1-7., 523 (012076). ISSN 1757-8981 (Print), 1757-899X (Online)

Akramin, M. R.M. and Sidek, Mohd Zaidi and Oumer, Ahmed Nurye and Amirruddin, A. K. and Hassan, Wan Anuar Wan and Mahdhir, Mohd Yusof (2017) Development of the overlay formulation in finite element model. , [Research Report: Research Report] (Unpublished)

Al-Bahr, Tareq M. and Sitti Asmah, Hassan and Othman, Che Puan and Nordiana, Mashros and Nur Sabahiah, Abdul Sukor (2022) Speed-flow-geometric relationship for urban roads network. Applied Sciences (Switzerland), 12 (9). pp. 1-23. ISSN 2076-3417. (Published)

Al-Bawri, Samir Salem and Goh, Hui Hwang and Islam, Md Shabiul and Wong, Hin Yong and Jamlos, M. F. and Narbudowicz, Adam and Muzammil, Jusoh and Thennarasan, Sabapathy and Rizwan, Khan and Islam, Mohammad Tariqul (2020) Compact ultra-wideband monopole antenna loaded with metamaterial. Sensors, 20 (3). pp. 1-15. ISSN 1424-8220. (Published)

Al-Bawri, Samir Salem and Islam, Md Shabiul and Wong, Hin Yong and Jamlos, M. F. and Narbudowicz, Adam and Muzammil, Jusoh and Thennarasan, Sabapathy and Islam, Mohammad Tariqul (2020) Metamaterial cell-based superstrate towards bandwidth and gain enhancement of quad-band CPW-fed antenna for wireless applications. Sensors, 20 (2). pp. 1-14. ISSN 1424-8220. (Published)

Al-Bawri, Samir Salem and Islam, Mohammad Tariqul and Jit Singh, Mandeep and Jamlos, M. F. and Narbudowicz, Adam and Ammann, Max J. and Schreurs, Dominique M. M. P. (2021) RSS-based indoor localization system with single base station. Computers, Materials & Continua, 70 (3). pp. 5437-5452. ISSN 1546-2226. (Published)

Al-Dabbagh, Jinan B. and M., Ishak and Rozman, Mohd Tahar and Siti Aisyah, Harun (2013) Effect of the Milling Parameters on the Characteristics of Ti-50%Al Nanocrystallite Synthesized by Mechanical Alloying (MA). International Journal of Engineering Research & Technology (IJERT), 2 (8). pp. 2113-2119. ISSN 2278-0181. (Published)

Al-Dabbagh, Jinan B. and Rozman, Mohd Tahar and M., Ishak and Siti Aisyah, Harun (2015) Structural and Phase Formation of TiAl Alloys Synthesized by Mechanical Alloying and Heat Treatment. International Journal Nanoelectronics and Materials, 8. pp. 23-32. ISSN 1985-5761 (print); 2232-1535 (online). (Published)

Al-Dhahebi, Adel Mohammed and Ahmad Kadri, Junoh and Zamri, Mohamed and Wan Zuki Azman, Wan Muhamad (2017) A computational approach for optimizing vehicles’ interior noise and vibration. International Journal of Automotive and Mechanical Engineering (IJAME), 44 (4). pp. 4690-4703. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Al-Dhahebi, Adel Mohammed and Ling, Jin Kiong and Syam, G. Krishnan and Yousefzadeh, Maryam and Elumalai, Naveen Kumar and Mohamed Saheed, Mohamed Shuaib and Seeram, Ramakrishna and Rajan, Jose (2022) Electrospinning research and products: The road and the way forward. Applied Physics Reviews, 9 (011319). pp. 1-44. ISSN 1931-9401. (Published)

Al-Talib, Ammar A. and Sarah Atifah, Saruchi and Suhana, Hassan and Nor Aziyatul Izni, Mohd Rosli (2023) Design and Fabrication of a Mutual Control Electronic Circuit for Solar and Electrical Water Heating. In: 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9 February - 12 February 2023 , Virtual, Online. pp. 689-693., 28. ISSN 2188-7829 ISBN 2188-7829

Al-Talib, Ammar Abdulaziz Majeed and Aung, Ik Chu and Noor Idayu, M. Tahir and Sarah ‘Atifah, Saruchi (2023) Solar powered outdoor air purifier with air quality monitoring. In: Proceedings of International Conference on Artificial Life and Robotics; 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9-12 February 2023 , Virtual, Online. pp. 688-693. (290429). ISSN 2435-9157 ISBN 978-499083508-8

Al-Talib, Ammar Abdulaziz Majeed and They, Kai Yang and Noor Idayu, M.Tahir and Sarah ‘Atifah, Saruchi (2023) Design and fabrication of power generating treadmill. In: Proceedings of International Conference on Artificial Life and Robotics; 28th International Conference on Artificial Life and Robotics, ICAROB 2023 , 9-12 February 2023 , Virtual, Online. pp. 710-714. (290429). ISSN 2435-9157 ISBN 978-499083508-8

Al-maamari, Azzat Esam Abdulqader and Iqbal, AKM Asif and Dewan Muhammad, Nuruzzaman (2020) Mechanical and tribological characterization of self-lubricating Mg-SiC-Gr hybrid metal matrix composite (MMC) fabricated via mechanical alloying. Journal of Science: Advanced Materials and Devices, 5 (4). pp. 535-544. ISSN 2468-2179. (Published)

Al-maamari, Azzat Esam Abdulqader and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Wear and mechanical characterization of Mg-Gr self-lubricating composite fabricated by mechanical alloying. Journal of Magnesium and Alloys, 7 (2). pp. 283-290. ISSN 2213-9567. (Published)

Alam, Md Zahangir and Shakib, Mohammed Nazmus and Islam, Minarul and Mohammad Jalal, Uddin (2021) Various risks and safety analysis to reduce fire in oil refinery plant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012028). ISSN 1757-899X

Alam, Mohammad Khurshed and M. H., Mohammed Faozi and A. R., Yusoff and M. Z., Zainol and Z., Khalil (2022) Fault Detection for Automotive Coil Spring Using Signal Processing Analysis. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 415-426.. ISBN 978-981-19-2890-1

Alanas, Edith and Erdawati, Erdawati and Saefurahman, Ganjar and Amiril Sahab, Abdul Sani (2021) Utilization of cellulose nanocrystals (CNC) as a filler for chitosan-based films for chili peppers packaging. In: IOP Conference Series: Earth and Environmental Science, International Conference of Biomass and Bioenergy 2020 , 10-11 August 2020 , Bogor, Indonesia. pp. 1-12., 749 (012028). ISSN 1755-1307

Alara, Oluwaseun Ruth and Nour, A. H. and Siti Kholijah, Abdul Mudalip and Olalere, Olusegun Abayomi (2018) Effects of Microwave-Assisted Extraction Parameters on the Recovery Yield and Total Phenolic Content of Vernonia amygdalina Leaf Extracts with Different Methods of Drying. Jundishapur Journal of Natural Pharmaceutical Products. pp. 1-11. ISSN 1735-7780. (In Press / Online First) (In Press / Online First)

Alara, Oluwaseun Ruth and Nour, A. H. and Ukaegbu, Chinonso Ishmael (2018) Soxhlet extraction of Phenolic Compounds from Vernonia cinerea leaves ant its antioxidant activity. Journal of Applied Research on Medicinal and Aromatic Plants, 11. pp. 12-17. ISSN 2214-7861. (Published)

Alenezi, R. A. and Norkhizan, A. M. and Rani, H. A. and Maulana, M. I. and Yasar, M. (2019) An experimental investigation of a diesel engine using carbon nanotubes blended with biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012048). ISSN 1757-8981 (Print), 1757-899X (Online)

Alexius, An'yan (2008) Effect of grinding process parameters on grinding force of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Alhaj, Nura Abdalrhman and Mohd Faizal, Jamlos and Sulastri, Abdul Manap and Bakhit, Abdelmoneim Ahmed and Rizalman, Mamat (2022) A review of multiple access techniques and frequencies requirements towards 6G. In: Proceedings - 2022 RFM IEEE International RF and Microwave Conference, RFM 2022 , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5

Alhamed, Abdulrahman and Mohd Romlay, Fadhlur Rahman and Muhammad, Khairul Fikri and Mohd Zawawi, Mohd Zairulnizam and Ishak, I. (2022) Support-free fused deposition modelling printing for overhangs structure. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 64-71. ISSN 2637-0883. (Published)

Alhammadi, Ali and Soar, Jeffrey and Yusaf, Talal F. and Ali, Bashar Mahmood and Kadirgama, Kumaran (2023) Redefining procurement paradigms: A critical review of buyer-supplier dynamics in the global petroleum and natural gas industry. Extractive Industries and Society, 16 (101351). pp. 1-11. ISSN 2214-790X. (Published)

Ali, A. J. Adham and Ahmad Nazif, Noor Kamar and Abdullah, Ibrahim and Sorooshian, Shahryar (2013) Simulation Model and Genetic Algorithm to Assembly Line Balancing. International Journal of Technology Management, 2. pp. 63-72. ISSN 2289-2753. (Published)

Ali, Elghool and Firdaus, Basrawi and Ibrahim, Thamir K. and Khairul, Habib and Hassan, Ibrahim and D. M. N., D. Idris (2017) A Review on Heat Sink for Thermo-electric Power Generation: Classifications and Parameters Affecting Performance. Energy Conversion and Management, 134. pp. 260-277. ISSN 0196-8904. (Published)

Ali, Mohammed A. H. and Alshamer, Mohammed A. (2018) An intelligent adjustable spanner for automated engagement with multi-diameter bolts/nuts during tightening/loosening process using vision system and fuzzy logic. The International Journal of Advanced Manufacturing Technology. pp. 1-19. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ali, Mohammed A. H. and Au, Kai Lun (2018) A cascading fuzzy logic with image processing algorithm-based defect detection for automatic visual inspection of industrial cylindrical object’s surface. The International Journal of Advanced Manufacturing Technology. pp. 1-14. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ali, Mohammed A. H. and Mailah, Musa (2018) Online Mapping-Based Navigation System for Wheeled Mobile Robot in Road Following and Roundabout. In: Mobile Robots. IntechOpen, pp. 1-23.

Ali, Mohammed A. H. and Mailah, Musa (2018) Path Planning and Control of Mobile Robot in Road Environments using Sensor Fusion and Active Force Control. IEEE Transactions on Vehicular Technology. pp. 1-20. ISSN 0018-9545. (Published)

Ali, Mohammed A. H. and Mailah, Musa (2019) A simulation and experimental study on wheeled mobile robot path control in road roundabout environment. International Journal of Advanced Robotic Systems, 16 (2). pp. 1-17. ISSN 1729-8806. (Published)

Ali, Obed Majeed (2014) The Influence of additives on biodiesel blend for engine performance and emission improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ali, Obed Majeed and R., Mamat and Rasul, M. G. and Najafi, G. (2017) Chapter eighteen-potential of biodiesel as fuel for diesel engine. In: Clean Energy for Sustainable Development: Comparisons and Contrasts of New Approaches. Elsevier, pp. 557-590. ISBN 978-0-12-805423-9

Ali Imran, Awaludin and S. H., Tomadi and Rosdi, D. and Mas Ayu, H. (2022) Analysis and simulation of temperature distribution and stress development in wire edm of tungsten carbide. In: Journal of Physics: Conference Series, Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021 , 16-17 December 2021 , Virtual Conference. pp. 1-12., 2312 (012046). ISSN 1742-6588

Aliaa, Zanurin (2023) Characterisation and corrosion evaluation of sol gel alumina-gnp coating on nickel substrate. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Juliawati, Alias).

Aliaa, Zanurin and Nor Azmi, Hj Johari and Juliawati, Alias and Mas Ayu, Hassan and Norizah, Hj Redzuan and Sudin, Izman (2021) Research progress of sol-gel ceramic coating : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1849-1854., 48 (176050). ISSN 2214-7853

Alias, Azri Turbocharger performance map and engine modeling for turbo engine. , [Research Report: Research Report] (Unpublished)

Alias, J. and Mohamad Mazwan, Mahat and Akramin, M. R.M. (2010) Developments of aneurysm rupture prediction method using fracture mechanics analysis. , [Research Report: Research Report] (Unpublished)

Alias, Mohd and M. H. L., Adnan and Nor Bahiyah, Baba and Zainal Ariffin, Selamat and Ahmad Nasser, Mohd Rose and Saiful Bahri, Mohamed (2020) Optimization of surface roughness and tool wear on AISI 4140 using coated Ni-YSZ for CNC turning process. In: 4th International Conference on Engineering Technology, ICET 2019 , 6-7 July 2019 , Darul Iman Training Centre (DITC)Teluk Kalong, Kemaman, Terengganu. pp. 1-12., 1532 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Alisha, E. and Najwa, N. and Jamaludin, A. S. and Razali, M. N. M. and Saffe, S. N. M. (2022) Analysis on auger pump performance during handling high viscous liquid. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 48-54. ISSN 2636-9575. (Published)

Aljabali, Ahlam and Abdul Rahman, Mohd Kasim and Najiyah Safwa, Khashi’ie and Iskandar, Waini and Noor Amalina Nisa, Ariffin (2023) Eyring-powell hybrid nanofluid with radiative heat flux: Case over a shrinking sheet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (1). 109 -121. ISSN 2289-7879. (Published)

Aljaerani, Hatem Ahmad and M., Samykano and A. K., Pandey and K., Kadirgama and George, Mathew and R., Saidur (2022) Thermophysical properties enhancement and characterization of CuO nanoparticles enhanced HITEC molten salt for concentrated solar power applications. International Communications in Heat and Mass Transfer, 132 (105898). pp. 1-9. ISSN 0735-1933. (Published)

Aljaerani, Hatem Ahmad and M., Samykano and R., Saidur and A. K., Pandey and K., Kadirgama (2021) Nanoparticles as molten salts thermophysical properties enhancer for concentrated solar power: A critical review. Journal of Energy Storage, 44 (Part A). pp. 1-20. ISSN 2352-152X. (Published)

Almanifi, Omair Rashed Abdul Wareth and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and Muhammad Yusri, Ismail and Anwar, P. P. Abdul Majeed (2021) The classification of heartbeat PCG signals via transfer learning. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 49-59., 730. ISBN 978-981-33-4596-6

Almanifi, Omair Rashed Abdulwareth and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Abdul Majeed, Anwar P. P. (2022) Heartbeat murmurs detection in phonocardiogram recordings via transfer learning. Alexandria Engineering Journal, 61 (12). pp. 10995-11002. ISSN 1110-0168. (Published)

Almanifi, Omair Rashed Abdulwareth and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2022) Human activity recognition based on wrist PPG via the ensemble method. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Almanifi, Omair Rashed Abdulwareth and Ng, Jee Kwan and Anwar P. P., Abdul Majeed (2021) The classification of FTIR plastic bag spectra via label spreading and stacking. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 70-76. ISSN 2637-0883. (Published)

Almuallim, Basel and Wan Sharuzi, Wan Harun and Al Rikabi, Ihab Jabbar and Mohammed, Hussein A. (2022) Thermally conductive polymer nanocomposites for filament-based additive manufacturing. Journal of Materials Science, 57 (6). 3993 -4019. ISSN 0022-2461. (Published)

Alqadami, Abdulrahman Shueai Mohsen and Jamlos, M. F. and Mohd Aminudin, Jamlos (2019) Efficacy of a wideband flexible antenna on a multilayer polymeric nanocomposites Fe3O4-PDMS substrate for wearable applications. Current Applied Physics, 19 (11). pp. 1259-1265. ISSN 1567-1739. (Published)

Alqadami, Abdulrahman Shueai Mohsen and Mohd Faizal, Jamlos and Imtiaz, Islam and Soh, Ping Jack and R., Mamat and Khairi, Khairil A. and Narbudowicz, Adam Z (2017) Multi-band antenna array based on double negative metamaterial for multi automotive applications. Progress In Electromagnetics Research (PIER), 159. pp. 27-37. ISSN 1070-4698 (print); 1559-8985 (online). (Published)

Alqadami, Abdulrahman Shueai Mohsen and Mohd Faizal, Jamlos and Ping, Jack Soh and Sharul Kamal, Abdul Rahim and Vandenbosch, Guy A. E. and Narbudowicz, Adam (2017) Miniaturized Dual-band Antenna Array with Double-negative (DNG) Metamaterial for Wireless Applications. Applied Physics A, 123 (22). pp. 1-5. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Alqadami, Abdulrahman Shueai Mohsen and Ping, Jack Soh and Sharul Kamal, Abdul Rahim and Narbudowicz, Adam and Mohd Faizal, Jamlos (2017) Left-handed Compact MIMO Antenna Array based on Wire Spiral Resonator for 5-GHz Wireless Applications. Applied Physics A, 123 (64). pp. 1-5. ISSN 0947-8396(print); 1432-0630(online). (Published)

Alsharafi, Ashraf Khaled and Muhammed Nafis, Osman Zahid (2023) Investigation on a vision-based approch for smart pothole detection using deep learning based on fast CNN. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 87-99. ISSN 2637-0883. (Published)

Alsibai, Mohammad Hayyan and Abdul Manap, Sulastri (2015) A Study on Smart Wheelchair Systems. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 25-35. ISSN 2289-697X. (Published)

Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Aman, Ahamad (2013) Fluid structural interface of force excitation on pipeline elbow joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Amanina Farhana, Ahmad (2017) The effects of waste polyethylene terephthalate as an aggregate coating on the properties of bituminous mixture for road making. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amanlou, Yasaman and Hashjin, Teymour Tavakoli and Ghobadian, B. and G., Najafi and R., Mamat (2016) A comprehensive review of Uniform Solar Illumination at Low Concentration Photovoltaic (LCPV) Systems. Renewable and Sustainable Energy Reviews, 60. pp. 1430-1441. ISSN 1364-0321. (Published)

Amar Safuan, Alyusi (2008) Development of vending machine with prepaid payment method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltier-based cooling refrigerator supplied by small scale PV. In: Engineering Technology International Conference (ETIC 2022). Engineering Technology International Conference (ETIC 2022) , 7-8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 159-163., 2022. ISBN 978-1-83953-782-0

Amierul Amin, Abdul Aziz (2013) Fabrication of aquaponic gravity flow plantation system for lettuce plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amiir Haamzah, Mohamed Ismail and Anwar, P. P. Abdul Majeed and E. H., Yap and A. H. P., Tan and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and M. A., Abdullah (2022) The employment of transfer learning for Covid-19 diagnostics: A ResNet evaluation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 128..

Amiir Haamzah, Mohamed Ismail and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Muhammad Amirul, Abdullah and Rabiu Muazu, Musa and Anwar P. P., Abdul Majeed (2021) The diagnosis of COVID-19 through X-ray images via transfer learning and fine-tuned dense layer on pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 19-24. ISSN 2637-0883. (Published)

Amin Abidin, Buran (2010) Performance of coated and uncoated carbide tools while dry machining aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amin Ridzuan, Ishak (2017) Penyelidik UMP cipta mesin pemotong daun mengkuang. Berita Harian . p. 3.

Amin Ridzuan, Ishak and Syafikha, Sazili and Nor Amalina, Alias and Siti Rohana, Idris and Ahmad Suhael, Adnan and Nur Izzati, Muhammad (2015) Baik pulih kenderaan percuma; pelbagai pihak tampil bantu ringankan beban mangsa banjir. Berita Harian .

Amir, Abdul Razak (2022) Hybrid Solar Heat Pump Dryer for Marine Products. FTKMA Bulletin (3). p. 26. ISSN 2773-594X

Amir, Abdul Razak (2012) Library Structure of Dynamic Simulation for Combined Heat and Power Plant in Modelica Language. Applied Mechanics and Materials, 110 (111). pp. 4925-4931. ISSN 1662-7482. (Published)

Amir, Abdul Razak and A. F., Sharol and Z. A. A., Majid and M. A. A., Azmi and M. A. S. M., Tarminzi and Ming, Y. H. and Z. A, Zakaria and M. A, Harun and A., Fazlizan and K., Sopian (2022) Effect of thermal energy storage material on the performance of double-pass solar air heater with cross-matrix absorber. Journal of Energy Storage, 51 (104494). pp. 1-15. ISSN 2352-152X. (Published)

Amir, Aziz and Ahmad Fitri, Yusop and R., Mamat (2014) Engine Performance and Emission of Emulsified Biodiesel. In: 3rd International Conference on Machine Design and Manufacturing Engineering (ICMDME 2014) , 24-25 may 2014 , Jeju Island, South Korea. pp. 1-6.. (Unpublished)

Amir, Aziz and Asraf, Jusoh and R., Mamat and Abdul Adam, Abdullah (2014) Effect of Water Content and Tween 80 to the Stability of Emulsified Biodiesel. Applied Mechanics and Materials, 465 (466). pp. 191-195. ISSN 1662-7482. (Published)

Amir, Aziz and Atiqah, Nisfun and R., Mamat and Ahmad Fitri, Yusop and Najafi, G. (2016) Properties of Biodiesel Derived from Vegetable Oil, Animal Fat and Waste Cooking Oil. In: 6th International Conference On “Engineering & Technology, Computer, Basic & Applied Sciences-ECBA , 29-30 July 2016 , Osaka Japan. pp. 1-6.. (Unpublished)

Amir, Aziz and R., Mamat and Amin, Makeen and Wan Khairuddin, Wan Ali (2012) Effect of propellant composition to the temperature sensitivity of composite propellant. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012023). ISSN 1757-899X

Amir, Aziz and R., Mamat and W. K., Wan Ali (2013) Low Pressure Strand Burner for Solid Propellant Burning Rate Studies. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Amir, Aziz and R., Mamat and Wan Khairuddin, Wan Ali and Mohd Rozi, Mohd Perang (2015) Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant. Applied Mechanics and Materials, 773/74. pp. 470-475. ISSN 1662-7482. (Published)

Amir, Aziz and Wong, Chung Siong and R., Mamat and Hagos, F. Y. (2014) Exhaust Emissions Reduction Of Diesel Engine Fueled With Emulsified Palm Oil Methyl Esters. Applied Mechanics and Materials, 660. pp. 457-461. ISSN 1662-7482. (Published)

Amir, Khalid and M. D., Anuar and M. Farid, Sies and B., Manshoor and Izzuddin, Zaman and Abdul Adam, Abdullah and R., Mamat (2014) Analysis of Mixture Formation and Flame Development in Biodiesel Burner Combustion Using Direct Optical Visualization Technique. Applied Mechanics and Materials, 663. pp. 8-12. ISSN 1662-7482. (Published)

Amir Ghaffari, Khalid (2008) Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC-CO. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Hamzah, Azahar (2010) Performance evaluation of FKM central unit air condition system/chilled water system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Iskandar, Ariffin (2008) Design and develop auto car jacker power by internal car power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Radzi, Ab. Ghani and M. A., Hasan and M., Hamdi and Zahari, Taha (2011) Impact response of multi slotted square column. Journal of Mechanical Engineering, 8 (2). pp. 71-91. ISSN 1823-5514. (Published)

Amira Qistina Syamimi, Zaifuddin and Aiman, Mohd Halil and Quazi, Moinuddin Mohammed and Muhammad Izhar, Ishak (2021) Enhancement of laser absorptivity in metal by laser surface modification. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril, S. A.S. (2018) Study on the application of ionic liquids in bio-based lubricant for a sustainable machining process. Masters thesis, Universiti Tun Hussein Onn Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Amiril Sahab, Abdul Sani (2014) Pressure gradient and geometrical variation of the abrasive blocks during the polishing process of ceramic tiles with line contact. Masters thesis, University of Kaiserslautern (Contributors, UNSPECIFIED: UNSPECIFIED).

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and A. Z., Hishamudin (2019) Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045. In: Journal of Physics: Conference Series, International Conference on Mechanical and Manufacturing Engineering (ICME2018) , 16-17 July 2018 , Johor, Malaysia. pp. 1-8., 1150 (012045). ISSN 1742-6596

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Hiroyuki, Sasahara (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209. pp. 947-964. ISSN 0959-6526 (Print); 1879-1786 (Online). (In Press / Online First) (In Press / Online First)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Safian, Sharif and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129. pp. 347-362. ISSN 0301-679X. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) A Review on Ionic Liquids as Sustainable Lubricants in Manufacturing and Engineering: Recent Research, Performance, and Applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) Tribological Performance of Modified Jatropha Oil Containing Oil-Miscible Ionic Liquid for Machining Applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1976-3824. (Published)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Zaidi, Embong and Samion, Syahrullail (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X. (Published)

Amiril Sahab, Abdul Sani and Muhammad Asyraaf Rusyaidi, Abdul Rauf and Aifa Arina, Mohd Alwi and Nur Hidayah, Mohd Nizam (2021) Calophyllum inophyllum (CI) fruits kernel seed separator for biolubricant production line. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Nor Athira, Jamaluddin and Ahmad Shahir, Jamaludin and Norfazillah, Talib (2021) Calophyllum-Inophyllum from Pahang Malaysia as Biolubricant Feedstock for Industrial Application. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 441-449., 1. ISBN 978-981-15-9505-9

Amiril Sahab, Abdul Sani and Shahandzir, Baharom (2021) A pneumatic non-explosive quick stop device for CNC turning machine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Amiril Sahab, Abdul Sani and Shahandzir, Baharom and Noor Asimah, Mamat and Amirah Sakinah, Mohd Rozlan and Norfazillah, Talib (2022) Comparative evaluation of crude Tamanu oil performance as metalworking fluids. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1783-1788., 48 (Part 6). ISSN 2214-7853

Amiril Sahab, Abdul Sani and Sousa, Fábio José Pinheiro (2020) The effect of pressure gradient and abrasive tool wear when polishing ceramic tiles. Materials Today: Proceedings, 46 (4). pp. 1770-1777. ISSN 2214-7853. (Published)

Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Puteri Humairah, Megat Ahmad Radzi and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2022) Modified Tamanu Plant-Based Oil from Pahang Malaysia as biodegradable metalworking fluids. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics & Material Forum 2022, iM3F 2022 , 20 - 20 July 2022 , Pekan, Pahang. 39 -45., 75 (149158). ISSN 2214-7853

Amirruddin, Abdul Kadir (2009) Effect Of Gasohol Blends On A Four Cylinder, Port Fuel Injection Engine Performance. In: International Conference on Applications and Design in Mechanical Engineering (ICADME’09) , 11-13 Oct 2009 , Universiti Malaysia Perlis, Kangar, Malaysia. . (Unpublished)

Amirruddin, Abdul Kadir and Mohd Razali, Hanipah (2010) Development Of A High Pressure Chamber For Spray Vessels. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Amirruddin, A. K. and Rahman, M. M. and Noor, M. M. and Ramasamy, D. and Harun, W. S W Investigation of dispersion, stability, and tribological performance of oil-based graphene and copper nanofluids. , [Research Report: Research Report] (Unpublished)

Amirruddin, Abdul Kadir (2019) Tribological performance analysis of nanocellulose-AL2O3-engine oil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Investigation of Waste Cooking Oil as a Tribological Lubricant for Piston Skirt Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Abdollah, Mohd Fadzli and R., Mamat and Alias, Azri (2017) Effect of vaned diffuser on the performance of small turbocharger. Journal of Mechanical Engineering, SI (1). pp. 227-236. ISSN 1823-5514. (Published)

Amirul, Zainal and Mohd Hafizu, Zakaria and Saiful Anwar, Che Ghani (2020) Investigation on machining performance of TiB2 and TiN coatings with modified cutting insert in AISI 1017 turning. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Amirul Ashraf, Makhtar and Nurul Hidayah, Razak and Zhang, Cheng (2020) Tool deterioration of stainless steel 316 in wet milling operation using carbide tool. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 590-595.. ISBN 978-981-15-0950-6

Amirul Azfar, Elias (2012) Optimization and performance analysis of a portable solar cooker system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Fazlan, Ramli (2011) Performance of sand cement block under axial load with different eccentricity. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Amirul Hakim, Sufian and Tan, Zi Xun and Mohd Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Muhd Razali (2021) Study on tire tread design effect onto Tire-road contact behavior through FEM. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 893-902.. ISBN 978-981-15-9504-2 (Print) ; 978-981-15-9505-9 (Online)

Amirulnizam, Mohd (2008) Development of brake system model for educational purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ammar, Adzman (2009) Home / lecture hall automation. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Amran, Kaharudin (2008) Design and development of piston-controlled intake port for 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anand, M. and Deepanraj, B. and Ranjitha, J. and M. M., Noor (2020) Biodiesel production from mixed elengi and pongamia oil using calcined waste animal bone as a novel heterogeneous catalyst. In: International Conference on Technological Advancements in Materials, Design, Manufacturing and Energy Sectors (ICTAMDMES'20) , 20-21 February 2020 , Chennai, India. pp. 1-7., 923. ISSN 1757-8981 (Print); 1757-899X (Online)

Anas Basri, Musthafa (2013) Experimental and numerical investigation on part thicknesses effects in tailor welded blank process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anati, N. and Aqida, S. N. and Ismail, Nurazima and Kasim, M. S. (2022) Mechanical characterisation of water-jet shot peened H13 tool steel surface. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9122 -9128. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Anbananthan Pillai, Munanday and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and K., Kadirgama and Ahmad Shahir, Jamaludin (2023) Analysis of convolutional neural networks for facial expression recognition on GPU, TPU and CPU. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 50-67. ISSN 2462-1943. (Published)

Anes, G. Mrwan and Ang, F. Chen and M. Akmal, Adzmi and M., Hafiz and K., Kamal and Mohd Fahmi, Othman and Abdul Adam, Abdullah (2019) Effect of AL2O3, SIO2 and CNT nanoparticles blend fuels on diesel engine performances and emission characteristics. In: 8th Global Conference On Global Warming , 22-25 April 2019 , Qatar University, Doha, Qatar. pp. 1-34.. (Unpublished)

Ang, Chan Mun and Hagos, F. Y. and R., Mamat and A. N., Oumer and Azmi, W. H. (2015) Modelling Phase Change Material for Concentrating Energy Storage in Solar Thermal Cooking Stove. In: International Conference on Mechanical Engineering and Advanced Material 2015 , 3-4 December 2015 , Kota Kinabalu, Sabah. pp. 4-11., 1 (1).

Ang, F. Chen and M. Akmal, Adzmi and Abdul Adam, Abdullah and Mohd Fahmi, Othman and Mohd Kamal, Kamaruzzaman and Anes, G. Mrwan (2018) Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide. Energy Conversion and Management, 171. pp. 461-477. ISSN 0196-8904. (Published)

Ang, Fuk Chen (2021) Evaluation of combustion characteristics, performance and exhaust emission for diesel fuel with various type nano particle blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ang, Liqi (2008) Lathe machine optimum cutting speed for different materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anggono, Willyanto and M. M., Noor and Suprianto, F. D. and Lesmana, L. A. and Gotama, G. J. and Setiyawan, A. (2018) Effect of Cerbera Manghas Biodiesel on Diesel Engine Performance. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5667-5682. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Anh, Tuan Hoang and Van, Vang Le and M.Said Al-Tawaha, Abdel Rahman and Duong, Nam Nguyen and M.Said Al-Tawaha, Abdel Razzaq and M. M., Noor and Van, Viet Pham (2018) An Absorption Capacity Investigation of New Absorbent Based On Polyurethane Foams and Rice Straw for Oil Spill Cleanup. Petroleum Science and Technology, 36 (5). pp. 361-370. ISSN 1091-6466(print); 1532-2459(online). (Published)

Anhar, Muhammad P. and Sutikno, S. and M. S. M., Sani (2019) Analysis of bulletproof vest made from fiber carbon composite and hollow glass microsphere (HGM) in absorbing energy due to projectile impact. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012001). ISSN 1757-8981 (Print), 1757-899X (Online)

Anis Farhana, Mohd Roslan (2012) Motor control-speed. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Anis Naema Atiyah, Rafai and Noraziah, Adzhar and Nor Izzati, Jaini (2021) An overview: On path planning optimization criteria and mobile robot navigation. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-11., 988 (012036). ISSN 1742-6588

Anis Syarliza, Ahmad (2013) Modeling, simulation and experimental verification of hydraulic servo system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Anuar, Mohamed and Nur Aqilah, Othman and Hamzah, Ahmad and Mohd Hasnun Ariff, Hassan (2022) Investigation of the optimal sensor location and classifier for human motion classification. In: ICCSCE 2022 - Proceedings: 2022 12th IEEE International Conference on Control System, Computing and Engineering , 21-22 October 2022 , Penang. pp. 142-146. (184194). ISBN 978-166548339-1

Anwar, P. P. A. Majeed and David, N. V. and S., Khairiyah (2012) Elastic And Dynamic Response Characteristics Of Kenaf/polypropylene Composites. In: High Performance Structures and Materials VI. WIT Transactions on The Built Environment, 124 . WIT Press, pp. 395-404. ISBN 978-1-84564-596-0 (print); 978-1-84564-597-7 (online)

Anwar, P. P. Abdul Majeed and Asrul Khairi, Sohaimi and Jamaluddin, Mahmud (2014) Preliminary Numerical Analysis of a Platform Structure. Applied Mechanics and Materials, 680. pp. 280-283. ISSN 1662-7482. (Published)

Anwar, P. P. Abdul Majeed and Mohd Azraai, M. Razman and Mohd Nor Azmi, Ab Patar and Ahmad Fahmi, Said and Jamaluddin, Mahmud (2014) System Integration and Control of Dynamic Ankle Foot Orthosis for Lower Limb Rehabilitation. In: IEEE International Symposium on Technology Management and Emerging Technologies (ISTMET 2014) , 27-29 May 2014 , Bandung, Indonesia. pp. 82-85.. ISBN 978-1-4799-3703-5

Anwar, P. P. Abdul Majeed and Siti Hajar, Mohd Yusop and Mohd Nor Azmi, Ab Patar and Jamaluddin, Mahmud (2014) A Parametric Investigation on the Neo-Hookean Material Constant. Advanced Materials Research, 915-916. pp. 853-857. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Anwar, P. P. Abdul Majeed and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Nina Nadia, Sahim (2013) An Overview Of Sports Engineering: History, Impact And Research. Movement, Health & Exercise (MoHE), 2. pp. 1-14. ISSN 2231-9409. (Published)

Anwar I., Ramadhan and Azmi, Wan H. and Rizalman, Mamat (2021) Stability and thermal conductivity of tri-hybrid nanofluids for high concentration in water-ethylene glycol (60:40). Nanoscience and Nanotechnology - Asia, 11 (4). pp. 1-11. ISSN 2210 - 6812. (Published)

Anwar Ilmar, Ramadhan (2023) Characterization, experimental and simulation of heat transfer performance for Al2O3-TiO2-SiO2 ternary nanofluid with inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Anwar Ilmar, Ramadhan and Azmi, W. H. and R., Mamat (2021) Experimental investigation of thermo-physical properties of tri-hybrid nanoparticles in water-ethylene glycol mixture. Walailak Journal of Science and Technology, 18 (8). pp. 1-15. ISSN 1686-3933. (Published)

Anwar Ilmar, Ramadhan and W. H., Azmi and R., Mamat (2020) Heat transfer characteristics of car radiator using tri-hybrid nanocoolant. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October. 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981

Aqida, S.N. and Shah, L.H and Naher, S. and Brabazon, D. (2023) Rapid solidification processing and bulk metallic glass casting. In: Comprehensive Materials Processing 2nd edition. Elsevier, pp. 1-22. ISBN 9780323960205, eBook ISBN: 9780323960212

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2020) Formation of ZnO nanoparticles in the presence of Tannic acid. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 61-64., 41 (168124). ISSN 2214-7853

Aqmal Idham, Abdul Shukor and Asrul, Adam (2018) Evaluation of Design Efficiency using Boothroyd Dewhurst Method for PCB Drilling Machine Products. International Journal of Simulation Systems, Science & Technology, 19 (5). 4.1-4.8. ISSN 1473-8031(Print); 1473-804x (Online). (Published)

Aravinda, Kottasamy (2010) Design and fabrication of laboratory scale micro-hydroturbine test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aravinda, Kottasamy and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and M. M., Noor and M. M., Rahman (2016) Aluminium Oxide (AL2O3) Nanoparticles with Long Life Coolant for Car Radiator Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Aravinda, Kottasamy and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. K., Pandey (2021) Optimization of impact properties of Copper-Polylactic Acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 78-90. ISSN 2289 - 7879. (Published)

Aravinthan, Rajaandra (2008) Automated guided vehicle application for dispenser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ariff, Che Mohd Noor (2008) PID control system implementation in embedded system for DC motor speed control. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ariff Nijay, Ramli (2023) Optimization of assembly line balancing with energy efficiency by using tiki-taka algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Abd Rashid).

Ariffin, Arifuddin and A. A.M., Redhwan and A. M., Syafiq and S., Zainal Ariffin and A. R.M., Aminullah and Wan Hamzah, Azmi (2022) Stability analysis of hybrid Al2O- TiO2 nano-cutting fluids. Archives of Materials Science and Engineering, 117 (1). pp. 5-12. ISSN 1897-2764. (Published)

Arifin, Zainal and Adiyasa, I. Wayan and Mohd Azri Hizami, Rasid (2022) Design optimization analysis on the performance of BLDC motors on electric bicycles. In: Journal of Physics: Conference Series ; 5th International Conference on Electrical, Electronics, Informatics, and Vocational Education, ICEELINVO 2022 , 5-6 October 2022 , Yogyakarta. pp. 1-9., 2406 (012016). ISSN 1742-6588

Ariyono, S. and Cholis, N. (2010) A Review On Control Strategy For Electro-Mechanical Rubber Belt Continuously Variable Transmissions (CVT). In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Arjun, Asogan and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and Devarajan, Ramasamy and Kumaran, Kadirgama (2023) Analysis of Correlation of Induced Frequency and Cream Skimming Efficiency through Ultrasonic Technology. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 326-333. ISSN 2462-1943. (Published)

Arman Shah, Abdullah and Izman, Sudin and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud (2018) Study on adhesion strength of tin coated biomedical ti-13zr-13nb alloy. Jurnal Teknologi (Sciences and Engineering), 80. pp. 27-35. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Arman Shah, Abdullah and Mas Ayu, Hassan and Rosdi, Daud and Sudin, Izman and Siti Nurul Fasehah, Ismail and Che Ghani, Che Kob and Mohammed Rafiq, Abdul Kadir (2018) The influence of ultrasonic vibration frequency on the properties of TiN coated biomedical Ti-13Zr-13Nb. Metals, 8 (5). pp. 1-10. ISSN 2075-4701. (Published)

Arvind, Kottasamy and Mahendran, Samykano and Kumaran, Kadirgama and Rahma, Mustafizur and Muhamad, Mat Noor (2021) Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique. Journal of Advanced Manufacturing Technology, 119. pp. 5211-5232. ISSN 2289-8107. (Published)

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Kunjunni, Baarath and Mohamad Heerwan, Peeie and Ahmad Fakhri, Ab. Nasir and Muhammad Izhar, Ishak (2021) Estimation of electric vehicle turning radius through machine learning for roundabout cornering. In: 19th IEEE Student Conference on Research and Development: Sustainable Engineering and Technology towards Industry Revolution, SCOReD 2021 , 23-25 November 2021 , Kota Kinabalu, Sabah. 329 -332.. ISSN 2643-2447 ISBN 978-1-6654-0193-7

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Mohamad Heerwan, Peeie and Papaioannou, Gerogious (2022) Investigating vehicle characteristics behaviour for roundabout cornering. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. 519 -528., 900. ISSN 1876-1100 ISBN 978-981192094-3

Ashwin Charles, Benedict (2014) Investigating drag reduction using turbolence altering pseudo-surface (TAPS). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ashwindran, Naidu Sandersagran (2020) Transient analysis of bio-inspired vertical axis wind turbine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and A. N., Oumer (2020) A moment coefficient computational study of parametric drag-driven wind turbine at moderate tip speed ratios. Australian Journal of Mechanical Engineering. pp. 1-15. ISSN 1448-4846. (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2023) A low-cost digital torquemeter coordinated by arduino board. International Journal of Integrated Engineering, 15 (1). 118 -130. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Azli, Abd Razak (2020) An introductory CFD analysis study of novel cavity vane driven wind turbine blade design. Journal of Mechanical Engineering, 17 (3). pp. 55-68. ISSN 1823-5514. (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2021) A review on the prospect of wind power as an alternative source of energy in Malaysia. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-17., 1078 (012017). ISSN 1757-899X

Ashwindran Naidu, Sanderasagran (2023) An investigation of sqrt 2 conjecture inspired drag induced vertical axis wind turbine blade. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azizuddin, Abd Aziz).

Aslfattahi, Navid and Loni, Reyhaneh and Bellos, Evangelos and Najafi, Gholamhassan and Kadirgama, K. and Wan Harun, Wan Sharuzi and Saidur, R. (2021) Efficiency enhancement of a solar dish collector operating with a novel soybean oil-based-MXene nanofluid and different cavity receivers. Journal of Cleaner Production, 317 (128430). pp. 1-16. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Aslfattahia, Navid and Samylingam, L. and Maryam Sadat, Kiai and K., Kadirgama and Kulish, Vladimir and Schmirler, Michal and Said, Zafar (2023) State-of-the-art review on electrolytes for sodium-ion batteries: Potential recent progress and technical challenges. Journal of Energy Storage, 72 (108781). pp. 108-128. ISSN 2352-152X. (Published)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Tezara, C. (2014) Experimental Investigations And Study Corrosion Model Of Welded 6061 Aluminium Exposed In Marine Environment. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-9..

Asmara, Y. P. and Yap, Chun Wei and Mohd Fazli, Ismail and Khairi, Yusuf (2014) Flow Assisted Erosion-Corrosion of High Speed Steel (HSS) in Nanofluid Coolant. In: World Virtual Conference on Advanced Research in Mechanical and Materials Engineering , 22-26 September 2014 , Kuala Lumpur. pp. 1-4..

Asmara, Y. P. (2018) The roles of H2S gas in behavior of carbon steel corrosion in oil and gas environment: a review. Jurnal Teknik Mesin Mercu Buana (JTM), 7 (1). pp. 37-43. ISSN 2089-7235(Print); 2549-2888(Online). (Published)

Asmara, Y. P. and J. P., Siregar and Cionita, Tezara and Chang, Tai Ann (2016) Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. IOP Conference Series: Materials Science and Engineering, 114 (1). pp. 1-6. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Asmara, Y. P. and Juliawati, Alias and Ahmad Shahrizan, Sulaiman and Jamiluddin, Jaafar (2013) Mechanistic Model of Stress Corrosion Cracking (SCC) of Carbon Steel in Acidic Solution with Presence of H2s. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Asmara, Y. P. and Juliawati, Alias and J., Jaafar and K., Azuar and J. P., Siregar and Kurniawan, Tedi (2014) Effects Pre-strain of Carbon Steel on Stress-Strain Diagram in CO2 Environment with the Presence of H2S. International Journal of Material Science Innovations (IJMSI), 2 (3). pp. 52-58. ISSN 2289-4063. (Published)

Asmara, Y. P. and Kurniawan, Tedi (2018) Corrosion prediction for corrosion rate of carbon steel in oil and gas environment: a review. Indonesian Journal of Science and Technology, 3 (1). p. 64. ISSN 2528-1410. (Published)

Asmara, Y. P. and Kurniawan, Tedi and Sutjipto, A. G. E. and Jamiluddin, Jaafar (2018) Application of plants extracts as green corrosion inhibitors for steel in concrete - a review. Indonesian Journal of Science & Technology, 3 (2). pp. 76-88. ISSN 2527-8045. (Published)

Asmara, Y. P. and M. F., Ismail and L., Giok Chui (2016) Predicting Effects of Corrosion Erosion of High Strength Steel Pipelines Elbow on CO2-Acetic Acid (HAc) Solution. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-5., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Asmara, Y. P. and Siregar, J. P. and C., Tezara and Wan, Nurlisa and J., Jamiluddin (2016) Long Term Corrosion Experiment of Steel Rebar in Fly Ash-Based Geopolymer Concrete in NaCl Solution. International Journal of Corrosion. (Published)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Asmara, Y. P. and Siregar, J. P. and Tezara, C. and Juliawati, Alias (2014) Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas. Applied Mechanics and Materials, 695. pp. 98-101. ISSN 1662-7482. (Published)

Asmara, Y. P. and Sutjipto, A. G. E. and H. N. M., Zuki and Siregar, J. P. and Bachtiar, Dandi and T., Kurniawan and M. C., Ismail (2016) Corrosion Inhibition of Carbon Steel in Oil and Gas Environments. International Journal of Advanced and Applied Sciences, 3 (5). pp. 88-91. ISSN 0973-4562 (Print); 0973-9769 (Online). (Published)

Asmara, Y. P. and Sutjipto, A. G. E. and Siregar, J. P. and Kurniawan, Tedi and Jamiluddin, Jaafar (2019) Analyses corrosion prediction software for CO2 corrosion of carbon steel using statistical formulas. International Journal of Mechanical Engineering and Robotics Research, 8 (3). pp. 374-379. ISSN 2278-0149. (Published)

Asnida, M. and Sakinah, Hisham and N. W., Awang and Amirruddin, Abdul Kadir and M. M., Noor and K., Kadirgama and D., Ramasamy and G., Najafi and F., Tarlochan (2018) Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact. Fuel, 212. pp. 656-667. ISSN 0016-2361. (Published)

Asnul Hadi, Ahmad and Naher, S. and S. N., Aqida and D., Brabazon (2014) Routes to Spheroidal Starting Material for Semi-Solid Metal Processing. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier, Singapore, pp. 135-148. ISBN 9780080965338

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, D. (2014) Effects of Cooling Rates on Thermal Profiles and Microstructure of Aluminium 7075. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1685-1694. ISSN 2180-1606. (Published)

Asnul Hadi, Ahmad and S., Naher and D., Brabazon (2014) Injection Tests and Effect On Microstructure and Properties of Aluminium 7075 Direct Thermal Method Feedstock Billets. Materials Science and Engineering, 611-612. pp. 1637-1644. (Published)

Asnul Hadi, Ahmad and Naher, S. and Brabazon, D. (2014) The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminum Alloy. Materials and Manufacturing Processes, 29 (2). pp. 134-139. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2014) The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminium Alloy. Materials and Manufacturing Processes, 29 (2). pp. 134-139. ISSN 1532-2475. (Published)

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2015) Mechanical Properties of Thixoformed 7075 Feedstock Produced Via The Direct Thermal Method. Key Engineering Materials, 651-53. pp. 1569-1574. ISSN 1662-9795. (Published)

Asrol, Awang (2009) Perodua mampu keluar 4,000 unit Alza sebulan. Berita Harian .

At-Tasneem, Mohd Amin (2012) A study on the applicability of symbolic computation in stabilising control design for switched systems. Masters thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

At-Tasneem, Mohd Amin and A. N., Oumer and W. H., Azmi and K., Sulihaakma (2019) Mechanical process and size characterisation of rice husk, mango bark and mango leaves as a drag reduction additive. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-15., 736 (022112). ISSN 1757-899X

At-Tasneem, Mohd Amin and N. T., Rao and Tuan Mohammad Yusoff, Tuan Ya and M. S., Idris and N. M. M., Ammar (2014) Numerical Simulation of Multiple Arrays Arrangement of Micro Hydro Power Turbines. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (5). pp. 929-935. (Published)

At-Tasneem, Mohd Amin and Sallehuddin, Mohamed Haris and Zulkifli, Mohd Nopiah (2012) Stability of a Switched Linear System. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 320-330. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Mohd Azmi, Ismail (2023) Effect of diameter, twist angle, and blade count on the thermal-hydraulic performance of a decaying twisted swirler. Case Studies in Thermal Engineering, 50 (103513). ISSN 2214-157X. (Published)

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Mohd Azmi, Ismail (2023) Numerical Simulation of Heat Transfer Performance of Water: Ethylene Glycol Mixture (W:EG) Through Turbine-Like Decaying Flow Swirler. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021 , 3 - 5 November 2021 , Virtual, Online. pp. 19-29.. ISSN 2195-4356

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Mohd Azmi, Ismail (2022) Thermo-Hydraulic Performance of Heated Tube with Twisted Delta Winglet Swirler Insert: A Numerical Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (1). pp. 181-200. ISSN 2289-7879. (Published)

At-Tasneem, Mohd Amin and Wan Mohamad , Azam and Ummu Kulthum, Jamaludin (2014) A Study on the Effect of Flow Rate on the Power Generated by a Pico Hydro Power Turbine. World Applied Sciences Journal. pp. 420-423. ISSN 1818-4952. (Published)

Athirah, Abdul Razak and Asma, Abu-Samah and Normy Norfiza, Abdul Razak and Ummu Kulthum, Jamaludin and Fatanah, Suhaimi and Azrina, Ralib and Mohd Basri, Mat Nor and Pretty, Christopher G. and Knopp, Jennifer Launa and Chase, J. Geoffrey (2020) Assessment of glycemic control protocol (STAR) through compliance analysis amongst Malaysian ICU patients. Medical Devices: Evidence and Research, 13. pp. 139-149. ISSN 1179-1470. (Published)

Athirah, B. and Nurul Shahida, M. S. (2019) Occupational noise exposure among airport workers in Malaysia: an ergonomic investigation. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Athirah, Razak and Normy Norfiza, A. Razak and Nurhamim, Ahamad and Fatanah, Suhaimi and Ummu Kulthum, Jamaludin (2015) Virtual Trial And Monte Carlo Analysis Of Model-Based Glycaemic Control Protocol With Reduced Nursing Effort. Jurnal Teknologi (Sciences and Engineering), 77 (7). pp. 55-59. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Athirah, Yusof and Nurul Shahida, M. S. (2021) Prevalence of Musculoskeletal Discomfort Among Workers in a Medical Manufacturing Facility. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8687-8694. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Atik, Faysal and Adhreena, M S N A and Vorathin, E. and Hafizi, Z. M. and Ngui, W K (2021) Leak diagnosis of pipeline based on empirical mode decomposition and support vector machine. IOP Conf. Series: Materials Science and Engineering, 1078 (1). pp. 1-9. ISSN 1757-899X (online); 1757-8981 (Print). (Published)

Atik, Faysal and Ngui, Wai Keng and Lim, M. H. (2021) Noise eliminated ensemble empirical mode decomposition for bearing fault diagnosis. Journal of Vibration Engineering & Technologies. pp. 1-17. ISSN 2523-3939. (Published)

Atik, Faysal and W. K., Ngui and M. H., Lim and M. S., Leong (2022) Ensemble Augmentation for Deep Neural Networks Using 1-D Time Series Vibration Data. Journal of Vibration Engineering & Technologies. pp. 1-25. ISSN 2523-3939. (Published)

Atiqah, Nafsun (2012) Biodiesel from various vegetables and tallow oils. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Atnaw, Samson M. and Kitaw, Daniel (2015) Investigation Of Industrial Energy Efficiency: A Case Study. In: International conference on Mechanical and Automotive Engineering (ICMA2015) , 27-28 October 2015 , Kuching, Malaysia. pp. 1-5..

Atnaw, Samson M. and Kulkarni, R. R. (2015) Application of Computer Aided Process Planning in Manufacturing Industries. International Journal of Engineering Technology And Sciences (IJETS), 4 (1). pp. 52-65. ISSN 2289-697X. (Published)

Atnaw, Samson M. and Singh, Lakhveer and Hagos, F. Y. and Yousuf, Abu (2016) Road Construction Equipment Management: A Case Study on Selected Industry. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 91-97. ISSN 2289-697X. (Published)

Audi, Sha Rizal (2007) Design of a compressed natural gas (CNG) mixer for1500cc engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Auji, Samsudin (2012) Design and fabrication of a single cylinder diesel engine test platform and it's experimental equipment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Awad, Omar I. and Ali, Obed Majeed and R., Mamat and Abdul Adam, Abdullah and G., Najafi and M. K., Kamarulzaman and I. M., Yusri and M. M., Noor (2017) Using Fusel Oil as a Blend in Gasoline to Improve SI Engine Efficiencies: A Comprehensive Review. Renewable and Sustainable Energy Reviews, 69. pp. 1232-1242. ISSN 1364-0321. (Published)

Awad, Omar I. and Obed M., Ali and Hammid, Ali Thaeer and R., Mamat (2018) Impact of fusel oil moisture reduction on the fuel properties and combustion characteristics of SI engine fueled with gasoline-fusel oil blends. Renewable Energy, 123. pp. 79-91. ISSN 0960-1481. (Published)

Awad, Omar I. and R., Mamat and Ali, Obed M. and Azmi, W. H. and K., Kadirgama and I. M., Yusri and A. M., Leman and Yusaf, T. (2017) Response Surface Methodology (RSM) Based Multi-Objective Optimization of Fusel Oil-Gasoline Blends at Different Water Content in SI Engine. Energy Conversion and Management, 150. pp. 222-241. ISSN 0196-8904. (Published)

Awad, Omar I. and R., Mamat and Ali, Obed Majeed and N. A. C., Sidik and Talal, Yusaf and K., Kadirgama and Kettner, Maurice (2018) Alcohol and ether as alternative fuels in spark ignition engine: A review. Renewable and Sustainable Energy Reviews, 82. pp. 2586-2605. ISSN 1364-0321. (Published)

Awad, Omar I. and R., Mamat and F., Yusop and M. M., Noor and I. M., Yusri (2017) By-Product Alcohol: Fusel Oil as an Alternative Fuel in Spark Ignition Engine. International Journal of Transport and Vehicle Engineering, 4 (6). p. 267. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Hammid, Ali Thaeer and I. M., Yusri and Mohd Adnin, Hamidi and Humada, Ali Mahmood and Ahmad Fitri, Yusop (2018) Overview of the oxygenated fuels in spark ignition engine: Environmental and performance. Renewable and Sustainable Energy Reviews, 91. pp. 394-408. ISSN 1364-0321. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Kettner, Maurice and K., Kadirgama and A. M., Leman and A. I.M., Shaiful (2018) Effects of fusel oil water content reduction on fuel properties, performance and emissions of SI engine fueled with gasoline -fusel oil blends. Renewable Energy, 118. pp. 858-869. ISSN 0960-1481. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Obed M., Ali and K., Kadirgama and A. M., Leman (2017) Performance and Combustion Characteristics of an SI Engine Fueled With Fusel Oil-Gasoline at Different Water Content. Applied Thermal Engineering, 123. pp. 1374-1385. ISSN 1359-4311. (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and F., Yusop and I. M., Yusri (2017) The Impacts of Moisture Content on Performance and Emissions of a Four-Cylinder SI Engine Running with Fusel Oil-Gasoline Blends. WSEAS Transactions on Environment and Development, 13. pp. 120-128. ISSN 1790-5079 (print); 2224-3496 (online). (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri (2017) Performance, Combustion Characteristics and Emission Tests of Single Cylinder Engine Running on Fusel Oil - Diesel Blended (F20) Fuel. International Journal of Vehicle Structures & Systems, 9 (3). pp. 195-198. ISSN 0975-3060 (Print); 0975-3540 (Online). (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri and Ahmad Fitri, Yusop (2018) The impacts of compression ratio on the performance and emissions of ice powered by oxygenated fuels: A review. Journal of the Energy Institute, 91 (1). pp. 19-32. ISSN 1743-9671. (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri (2016) Effect of Fuel Oil - Gasoline Fusel Blends on the Performance and Emission Characteristics of Spark Ignition Engine: A Review. Journal of Scienctific Research & Development , 3 (5). pp. 31-36. ISSN 1115-7569. (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri and Abdul Adam, Abdullah and Ahmad Fitri, Yusop and M. M., Noor (2017) The Effect of Adding Fusel Oil to Diesel On the Performance and the Emissions Characteristics in a Single Cylinder CI Engine. Journal of the Energy Institute, 90 (3). pp. 382-396. ISSN 1743-9671. (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and Mohd Fahmi, Othman and Abdul Adam, Abdullah (2017) Experimental Study of Performance and Emissions of Fusel Oil-Diesel Blend in a Single Cylinder Diesel Engine. International Journal of Engineering and Technology, 9 (2). pp. 138-142. ISSN 1793-8236 . (Published)

Awad, Omar I. and R., Mamat and Thamir K., Ibrahim and Hagos, F. Y. and M. M., Noor and I. M., Yusri and A. M., Leman (2017) Calorific Value Enhancement of Fusel Oil by Moisture Removal and Its Effect on the Performance and Combustion of a Spark Ignition Engine. Energy Conversion and Management, 137. pp. 86-96. ISSN 0196-8904. (Published)

Awad, Omar I. and Zhou, Bo and Kadirgama, Kumaran and Chen, Zhenbin and Mohammed, M. N. (2024) Nonthermal plasma-assisted catalysis NH3 decomposition for COx-free H2 production : A review. International Journal of Hydrogen Energy, 56. pp. 452-470. ISSN 0360-3199. (Published)

Awad, Omar Ibraheem (2018) The effects of fusel oil water content reduction on performance and emissions of SI engine with fusel oil – gasoline blended fuel. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Awang Omar Firdaus, Awang Ismail (2009) Production of grease from spent lubricant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Surface Characterization of TiNi Deformed by High-pressure Torsion. Applied Surface Science, 289. pp. 338-344. ISSN 0169-4332. (Published)

Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2017) Corrosion behavior of HPT-deformed TiNi alloys in cell culture medium. In: 4th International Conference on the Advancement of Materials and Nanotechnology (ICAMN 2016) , 9-11 November 2016 , Langkawi. pp. 1-6., 1877 (1). ISSN 0094243X ISBN 978-073541557-7

Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Cytocompatibility Evaluation and Surface Characterization of TiNi Deformed by High-pressure Torsion. Materials Science and Engineering: C, 43. pp. 411-417. ISSN 0928-4931. (Published)

Ayasrah, Omar and Faiz, Mohd Turan (2022) Assessing integrated TOPSIS Model with exponential intuitionistic entropy measure: A case study. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 49-57., 1. ISBN 978-981-19-2890-1

Ayasrah, Omar and Faiz, Mohd Turan (2021) Multi-Criteria Decision-Making Model using Intuitionistic Fuzzy Entropy and Variable Weight Theory. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 18-26. ISSN 2637-0883. (Published)

Ayasrah, Omar and Faiz, Mohd Turan (2021) A Review of Multi-criteria Decision-Making Methods Using Application of Variable Weight Theory and IF-TOPSIS-EF. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, pp. 13-24. ISBN 978-981-15-9505-9

Ayodele, Ozavize Freida and Ayodele, Bamidele Victor and Siti Indati, Mustapa and Fernando, Yudi (2021) Effect of activation function in modeling the nexus between carbon tax, CO2 emissions, and gas-fired power plant parameters. Energy Conversion and Management: X, 12 (100111). pp. 1-9. ISSN 2590-1745. (Published)

Azah Fadhilah, Ramly (2008) Intake valve flow optimization for single cylinder four stroke petrol engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azhari, Azmir (2017) Development of a low-cost miniature waterjet machine for micromachining application. , [Research Report: Research Report] (Unpublished)

Azhari, Azmir and Ismail, Izwan and Gebremariam, Mebrahitom Asmelash and Rahman, M. M. and Rosli, Nurrina (2019) Machinability study of structural automotive alloys using abrasive waterjet machining process. , [Research Report: Research Report] (Unpublished)

Aziema, Mohamad Azizi (2008) Effect of grinding process parameters on surface roughness of aluminium alloy 6061-T6. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azim, Arshad and Hassan, Ibrahim and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin (2014) Study on the Application of Fit-Viability Framework for Renewable Energy Technology Evaluation. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. pp. 1-4..

Azim, Arshad and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Rosdi, Hussin (2014) CFD Study of Tidal Current Turbine Shroud for Initial Design Evaluation. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .

Aziman, Abdullah and Asar, Abdul Karim and Nur Alnisa’ Anis Alanna, Ruzelan (2020) A novel Learning Engagement Data Model (LEDM) for online attendance system. In: IOP Conference Series: Materials Science and Engineering, The 6th International Conference on Software Engineering & Computer Systems , 25-27 September 2019 , Pahang, Malaysia. pp. 1-8., 769 (012026). ISSN 1757-899X

Azinuddin Zulfahmi, Megat (2020) CryoTransmission Electron Microscopy a reliable technique or just another expensive attachment. UMP News .

Aziz, Amir and Mamat, Rizalman and Abdullah, Abdul Adam and Hagos, Ftwi Yohaness and Ali, Obed Majeed (2017) Performance and NOx emissions of a diesel engine with water injection. , [Research Report: Research Report] (Unpublished)

Aziz, Shujahadeen B. and Brevik, Iver and Hamsan, Muhamad H. and Brza, Mohamad A. and Nofal, Muaffaq M. and Abdullah, Aziz M. and Rostam, Sarkawt and Al-Zangana, Shakhawan and Saifful Kamaluddin, Muzakir and Kadir, Mohd F. Z. (2020) Compatible solid polymer electrolyte based on methyl cellulose for energy storage application: structural, electrical, and electrochemical properties. Polymers, 12 (10). pp. 1-19. ISSN 2073-4360. (Published)

Azizi, Amir (2013) An Integrated Approach Based on SARIMA and Bayesian to Estimate Production Throughput under Five Random Variables. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-12..

Azizi, Amir and Hosseini, Seyed Mehrshad Parvin and Lin, Lau Sow (2013) A study on the Export of Small and Medium Enterprises in the Manufacturing. In: Proceedings of International Conference on Business, Accounting, Finance, and Economics (BAFE 2013) , 4 October 2013 , Universiti Tunku Abdul Rahman, Kampar, Perak. pp. 285-293..

Azizi, Amir and Sorooshian, Shahryar (2014) Different Approaches to Overcome Uncertainties of Production Systems. In: International Conference on Mathematics, Engineering & Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Pulau Pinang. pp. 1-8..

Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Lean management in quality improvement of cutting and hot forming process for window tint. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 70..

Azizuddin, Abd Aziz (2021) A tale of FTKMA focus groups. FTKMA Bulletin (2). p. 22. ISSN 2773-594X

Azizuddin, Abd Aziz and Daisuke, Sumiyoshi and Yasunori, Akashi (2017) Low Cost Humidity Controlled Air-Conditioning System for Building Energy Savings in Tropical Climate. Journal of Building Engineering, 11. pp. 9-16. ISSN 2352-7102. (Published)

Azizuddin, Abd Aziz and S. N., Ashwindran (2019) Design of small thermal vacuum chamber for 125-U CubeSat satellite. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , UMP Pekan. pp. 1-7., 469 (012108).

Azizuddin, Abd Aziz and Sumiyoshi, Daisuke and Akashi, Yasunori (2018) Design procedure for dual air handling unit of air-conditioning system. In: MATEC Web of Conferences; 2018 UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18 - 19 September 2018 , Tamil Nadu, India. pp. 1-7., 225 (04016). ISSN 2261-236X

Azizuddin, Abd Aziz and Sumiyoshi, Daisuke and Akashi, Yasunori (2013) Investigation of current situation of building energy conservation in Malaysia for optimal air-conditioning design. Journal of Architecture and Urban Design, 24. pp. 79-87. ISSN 1346-5325. (Published)

Azizul Hafiz, Abdullah and Muhammad Najamuddin, Selamat and Nadzirah, Mohd Mokhtar (2021) Design and performance analysis of cooling tower. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Azizul Helmi, Sofian (2022) Aplikasi Teknologi Realiti Terimbuh dalam mendidik masyarakat mendepani marabahaya bencana. UMP News .

Azizul Qayyum, Basri and N. M. Zuki, N. M. (2017) The study of extended single minute exchange of die (SMED) method in 1200 tonnage tandem press line for operation improvement. In: The Proceedings of the 47th International Conference on Computers & Industrial Engineering (CIE47) , 11-13 October 2017 , Lisbon, Portugal. pp. 1-7. (149). ISSN 2164-8689

Azizul Qayyum, Basri and N. M. Zuki, N. M. and K. A. S. H. M., Yasir and H. M., Fazi and Ahmad Fauzi, Fudzin (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012005). ISSN 1757-899X

Azizul Rahman, Abd Aziz (2008) Improvement and optimization of tire nut removal with 114 PCD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman and Siti Rabiatull Aisha, Idris (2013) Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman (2015) Thermal Cyclic Test For Sn-4Ag-0.5Cu Solders On High P Ni/Au AND Ni/Pd/Au Surface Finishes. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. .

Azman, Idris and Azim, Arshad and Shahrani, Anuar and Achmmmad, Shukrie (2014) Tidal-current Power Generation by Vertical Axis Underwater Turbine with Diffuser in Coastal Area of Peninsular Malaysia. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .

Azman, Idris and Azim, Arshad and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Rosdi, Hussin (2014) Study of tidal current power generation by vertical axis underwater turbine with diffuser in Costal Peninsular Malaysia. Advances in Environmental Biology, 8 (22). pp. 116-119. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Azmi, W. H. (2015) Heat transfer augmentation of water based TIO2 AND SIO2 nanofluids in a tube with twisted tape. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azmi, W. H. (2017) Novel Lubricant Compressor For Automotive Air Conditioning System. In: The Invention & New Product Exposition (INPEX) 2017 , 13-15 June 2017 , Pittsburgh, Pennsylvania. p. 1..

Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and R., Mamat (2016) Thermal Conductivity Enhancement Of AL2O3 and SIO2 Nanolubricants. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9.. (Unpublished)

Azmi, W. H. and H. W., Chiam and N. M., Adam and M. K. A. M., Ariffin (2017) Numerical Study Of Nanofluid Heat Transfer For Different Tube Geometries – A Comprehensive Review On Performance. International Communications in Heat and Mass Transfer, 86. pp. 60-70. ISSN 0735-1933. (Published)

Azmi, W. H. and K. V., Sharma and R., Mamat and Shahrani, Anuar (2013) Nanofluid Properties For Forced Convection Heat Transfer: An Overview. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 397-408. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and N. A., Usri and R., Mamat and K. V., Sharma (2016) Heat Transfer Augmentation of Ethylene Glycol: Water Nanofluids and Applications – A review. International Communications in Heat and Mass Transfer, 75. pp. 13-23. ISSN 0735-1933. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and R., Mamat and K. V., Sharma and Mohd Sham, Mohamad (2016) Effects of Working Temperature on Thermo-Physical Properties and Forced Convection Heat Transfer of TiO2 Nanofluids in Water–Ethylene Glycol Mixture. Applied Thermal Engineering, 106. pp. 1190-1199. ISSN 1359-4311. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and Usri, N. A. and R., Mamat and Mohd Sham, Mohamad (2016) Heat Transfer and Friction Factor of Water and Ethylene Glycol Mixture Based TiO2 and Al2O3 Nanofluids Under Turbulent Flow. International Communications in Heat and Mass Transfer, 76. pp. 24-32. ISSN 0735-1933. (Published)

Azmi, W. H. and M. Z., Sharif and Yusof, T. M. and R., Mamat and A. A. M., Redhwan (2017) Potential of Nanorefrigerant and Nanolubricant on Energy Saving in Refrigeration System – A Review. Renewable and Sustainable Energy Reviews, 69. pp. 415-428. ISSN 1364-0321. (Published)

Azmi, W. H. and N. A., Usri and R., Mamat and K. V., Sharma and M. M., Noor (2017) Force Convection Heat Transfer of Al2O3 Nanofluids for Different Based Ratio of Water: Ethylene Glycol Mixture. Applied Thermal Engineering, 112. pp. 707-719. ISSN 1359-4311. (Published)

Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2018) Efficient TiO2-SiO2 hybrid nanocoolant. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Azmi, W. H. and Sharma, K. V. (2010) Estimation of Forced Convection Heat Transfer Coefficient of Nanofluids using Concept of Colburn Analogy. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. pp. 852-862.. ISBN 978-967-0120-04-1

Azmi, W. H. and Sharma, K. V. (2010) Influence Of Certain Thermo-Physical Properties On Prandtl Number Of Water Based Nanofluids. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 502-515.. ISBN 978-967-5080-9501

Azmi, W. H. and Sharma, K. V. and R., Mamat and Shahrani, Anuar (2013) Turbulent Forced Convection Heat Transfer of Nanofluids with Twisted Tape Insert in a Plain Tube. Energy Procedia, 52. pp. 296-307. ISSN 1876-6102. (Published)

Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and G., Najafi (2014) Heat Transfer and Friction Factor of Water Based TiO2 and SiO2 Nanofluids Under Turbulent Flow In a Tube. International Communications in Heat and Mass Transfer, 59. pp. 30-38. ISSN 0735-1933. (Published)

Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and Shahrani, Anuar (2014) Comparison of Convective Heat Transfer Coefficient and Friction Factor of TiO2 Nanofluid flow in a tube with Twisted Tape Inserts. International Journal of Thermal Sciences, 81. pp. 84-93. ISSN 1290-0729. (Published)

Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and Shahrani, Anuar and V. Dharma, Rao (2013) Experimental Determination of Turbulent Forced Convection Heat Transfer and Friction Factor with SiO2 Nanofluid. Experimental Thermal and Fluid Science, 51. pp. 103-111. ISSN 0894-1777. (Published)

Azmi, W. H. and Sharma, K. V. and Sarma , P. K. and R., Mamat and Shahrani, Anuar and Sundar, L. Syam (2014) Numerical Validation of Experimental Heat Transfer Coefficient with SiO2 Nanofluid Flowing in a Tube with Twisted Tape Inserts. Applied Thermal Engineering, 73. pp. 294-304. ISSN 1359-4311. (Published)

Azmir, Azhari and A. A., Aziz and M. M., Noor (2007) Optimization Of Abrasive Waterjet Machining Process Parameters Using Orthoganalarray With Grey Relational Analysis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. pp. 21-30..

Azmir, Azhari and S., Sulaiman and A. K., Prasada Rao (2016) A Review on the Application of Peening Processes for Surface Treatment. IOP Conference Series: Materials Science and Engineering, 114 (012002). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Azmir, Azhari and Schindler, Christian and Hilbert, K. and Godardb, C. and Kerscher, Eberhard (2014) Influence of Waterjet Peening and Smoothing on the Material Surface and Properties of Stainless Steel 304. Surface and Coatings Technology, 258 (Nov.). pp. 1176-1182. ISSN 0257-8972. (Published)

Azmir, Azhari and Schindler, Christian and Godard, Claudia and Gibmeier, Jens and Kerscher, Eberhard (2016) Effect of Multiple Passes Treatment in Waterjet Peening on Fatigue Performance. Applied Surface Science. pp. 1-7. ISSN 0169-4332. (Published)

Azri, Alias (2013) Evaluation of various estimation equations for particle-fluid interaction forces and modeling of heat transfer between particles for dem simulations. PhD thesis, Okayama University of Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Azri, Alias and Kenya, Kuwagi and Atsuto, Kogane and Hiroyuki, Hirano and Toshihiro, Takami (2014) DEM-CFD Simulations for Various Fluidizations. International Journal of Chemical and Environmental Engineering, 5 (1). pp. 15-17. ISSN 2078-0737. (Published)

Azri, Marmoh (2013) Optimal design of heat recovery system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azrin, Abdul Aziz and Muhammad Yusri, Ismail (2021) Spark plug fault recognition using classification method in a spark ignition engine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and M.H., Mat Yasin and A., Zainal (2021) Effects of park energy on spark plug fault recognition in a spark ignition engine. Energy Engineering. ISSN 0199-8595. (Unpublished) (Unpublished)

Azrina, M. Ralib and Fatimah, Dzaharudin and Mohd Basri, Mat Nor (2017) 025 Estimates of glomerular filtration rate in the critically ill with sepsis. Kidney International Reports, 2 (4 Supp). pp. 33-34. ISSN 2468-0249. (Published)

Azrul Azam, Nizarudin (2010) Experimental study of heat transfer coefficient of nanofluid flow through a plain tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrul Azim, Abdullah Hashim and Salmiah, Ahmad and Nor Maniha, Abdul Ghani and Ahmad Nor Kasruddin, Nasir (2023) Integrated Modelling and Control of Linear Actuator Based Automatic Pedal Pressing Mechanism for Low-Speed Driving in a Road Traffic Delay. International Journal of Robotics and Control, 3 (3). pp. 485-500. ISSN 2775-2658. (Published)

Azrulhafiq, Mohd Azizi (2012) Experimental and analytical evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azuan, Ismail (2013) Railroad inspector for railroad department in Malaysia /. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

B

B., Ghobadian and G., Najafi and R., Mamat and M., Abbasian (2015) Combustion Parameters of Spark Ignition Engine using Waste Potato Bioethanol and Gasoline Blended Fuels. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (012008).

B., Ghobadian and G., Najafi and R., Mamat and M. M., Noor and R., Yahyaee (2015) Performance and Emission Characteristics of a Diesel Engine Fueled with Fish-Oil Biodiesel. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

B., Kalidasan and Pandey, A. K. and Syed, Shahabuddin and Mahendran, Samykano and M., Thirugnanasambandam and Saidur, R. (2020) Phase change materials integrated solar thermal energy systems: Global trends and current practices in experimental approaches. Journal of Energy Storage, 27 (101118). pp. 1-34. ISSN 2352-152X. (Published)

B., Norhafzan and S. N., Aqida and E., Chikarakara and D., Brabazon (2016) Surface Modification of AISI H13 Tool Steel by Laser Cladding with NiTi Powder. Applied Physics A. pp. 2-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

B., Norhafzan and S. N., Aqida and F., Fazliana and Mohamed Reza Zalani, Mohamed Suffian and I., Ismail and C.M., Khairil (2018) Laser melting of groove defect repair on high thermal conductivity steel (HTCS-150). Applied Physics A, 124 (2). p. 169. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

B., Norhafzan and S. N., Aqida and F., Mifthal and A. R., Zulhishamuddin and I., Ismail (2017) Effect of heating time on hardness properties of laser clad gray cast iron surface. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

B., Sangmesh and K., Gopalakrishna and S. H., Manjunath and N., Kathyayini and K., Kadirgama and Mahendran, Samykano and Vijayakumar, G. C. (2018) Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3852-3865. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

B.B, Sahari and M.M, Shahzamanian and M, Bayat and Z.N, Ismarrubie and F, Mustapha (2012) Comparison of Thermoelastic Results in Two Types of Functionally Graded Brake Discs. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 660-669. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Baarath, Kunjunni (2020) Effect of unbalanced overloading on the cornering stability profile of nonholonomic two in-wheel compact electric vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Baarath, Kunjunni and Muhammad Aizzat, Zakaria and Ahmad Fakhri, Ab. Nasir and Hamid, Umar Zakir Abdul (2018) Effect of road profile on normal force generated on electric vehicle. In: Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 237-248. ISBN 978-981-13-8323-6

Baba, M. Deros and Ahmad Rasdan, Ismail and Jaharah, A. Ghani and Mohd Yusri, Mohd Yusof (2014) Conformity to occupational safety and health regulations in Malaysian small and medium enterprises. American Journal of Applied Sciences, 11 (3). pp. 499-504. ISSN 1554-3641. (Published)

Babu, Devin and Abdul, Nasir and A. S., Jamaludin and Muhammad Hisyam, Rosle (2022) Holding, grasping and sensing of prosthetic robot arm like a real human hand, a journey beyond limits: An extensive review. In: Human-Centered Technology for a Better Tomorrow: Proceedings of HUMENS 2021 , 22 February 2020 , Pekan, Pahang, Malaysia. pp. 485-504.. ISBN 978-981-16-4115-2

Bagaber, Salem Abdullah and A. R., Yusoff (2016) Analysis of Dry Turning Process of AISI316 for Coated and Uncoated Insert Tools Based on Economical Method. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 683-692..

Bagaber, Salem Abdullah and A. R., Yusoff (2017) Effect of Cutting Parameters on Sustainable Machining Performance of Coated Carbide Tool in Dry Turning Process of Stainless Steel 316. In: AIP Conference Proceedings: Green And Sustainable Technology: 2nd International Symposium (ISGST2017) , 10–13 January 2017 , Perak, Malaysia. pp. 1-8., 1828 (1). ISBN 978-0-7354-1496-9

Bagaber, Salem Abdullah and A. R., Yusoff (2017) Multi-Objective Optimization of Cutting Parameters to Minimize Power Consumption in Dry Turning of Stainless Steel 316. Journal of Cleaner Production, 157. pp. 30-46. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Multi-responses optimization in dry turning of a stainless steel as a key factor in minimum energy. The International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 1109-1122. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Bagaber, Salem Abdullah and Izman, Sudin (2016) Assessment Influence of Microwave Heating on a Physical Properties of Dried Clay Bricks Compared with Conventional Methods. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 676-682..

Bagaber, Salem Salah Abdullah (2019) Energy and cost integration model for multi-objective optimisation in turning process of stainless steel 316. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bahaaddein, K. M. Mahgoub and Suhaimi, Hasan and S. A., Sulaiman and R., Mamat and Abdul Adam, Abdullah and Hagos, F. Y. (2017) Combustion and Performance of Syngas Dual Fueling in a CI Engine with Blended Biodiesel as Pilot Fuel. BioResources, 12 (3). pp. 5617-5631. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Baharuddin, N. J. and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2022) Study on die shoulder patterning method (DSPM) to minimise springback of U-bending. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9509-9518. ISSN 2180-1606. (Published)

Baheta, Aklilu Tesfamichael and Oumer, A. N. and Hailegiorgis, Sintayehu M. (2018) Analysing the Thermal Performance of Heat Pipe Using Copper Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155. ISSN 2289-7879. (Published)

Bai, Sandhia and Amirruddin, Abdul Kadir and Pandey, A. K. and Samykano, M. and Muhammad Shakeel, Ahmad and Sharma, Kamal and Tyagi, V. V. (2021) Advancements in the development of various types of dye-sensitized solar cells: A comparative review. Energy Engineering, 118 (4). 737 -759. ISSN 0199-8595. (Published)

Bakar, R. A. (2008) New design of a two stroke modular engine for multipurpose usage with lean burn capability. , [Research Report: Research Report] (Unpublished)

Bakhit, Abdelmoneim Ahmed and Mohd Faizal, Jamlos and Alhaj, Nura Abdalrhman and Rizalman, Mamat (2022) Biofloc farming with IoT and machine learning predictive water quality system. In: Proceedings - 2022 RFM IEEE International RF and Microwave Conference, RFM 2022 , 19-21 December 2022 , Kuala Lumpur. pp. 1-4. (187406). ISBN 978-166548977-5

Balakrishnan, Yogaraja and At-Tasneem, Mohd Amin (2016) Parametric Study of Multiple Configurations of Pico Hydrokinetic Turbines using CFD. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8., 74 (00024). ISSN 2261-236X

Balfaqih, M. and Jabbar, W. and Khayyat, M. and Hassan, R. (2021) Design and development of smart parking system based on fog computing and internet of things. Electronics (Switzerland), 10 (24). pp. 1-18. ISSN 2079-9292. (Published)

Balkhaya, . and Anhar, M. P. and Suwarno, . and M. S. M., Sani (2019) Investigation of knife quality by using forging and flame hardening methods. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-6., 506 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)

Bangit, Grunsin (2008) Study to determine the optimum parameter of the electro discharge machine die sinked 4 litres bottle neck. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bari, Bifta Sama and Islam, Md Nahidul and Rashid, Mamunur and Hasan, Md Jahid and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and Majeed, Anwar P.P. Abdul (2021) A real-time approach of diagnosing rice leaf disease using deep learning-based faster R-CNN framework. PeerJ Computer Science, 7 (e432). pp. 1-27. ISSN 2376-5992. (Published)

Baridula, Ravinder Reddy and C. K. M., Faizal and Ramaraju, Ramgopal Varma and Abdullah, Ibrahim (2017) Effect of Welding Speed on Microstructure and Mechanical Properties due to The Deposition of Reinforcements on Friction Stir Welded Dissimilar Aluminium Alloys. In: MATEC Web of Conferences: 8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17) , 22-23 July 2017 , Langkawi, Malaysia. pp. 1-11., 135 (00039). ISSN 261-236X

Baridula, Ravinder Reddy and Ramaraju, Ramgopal Varma and C. K. M., Faizal and Abdullah, Ibrahim (2017) Effect of Groove Size on Mechanical Properties and Microstructure Due to Reinforcement Addition in Friction Stir Welded Dissimilar Alloys. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5671-5676. ISSN 1819-6608. (Published)

Bashir, M. Nasir and Saad, Hafiz Muhammad and Muhammad, Rizwan and Quazi, Moinuddin Mohammed and Ali, Muhammad Mahmood and Ahmed, Arslan E.M. and Zaidi, Asad Ali and Soudagar, Manzoore Elahi M. and Haseeb, Abdul S.Md Abdul and Naher, Sumsun (2022) Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint. Journal of Materials Science: Materials in Electronics, 33 (28). pp. 22499-22507. ISSN 0957-4522. (Published)

Bastian Wibar, Momang (2017) Development of portable checking fixture device for automotive quality-confirmation inspection. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Bastian Wibar, Momang and N. M. Zuki, N. M. (2014) Design of CF for Automotive Body Parts Based on Artificial Intelligent. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014) , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-7..

Bastian Wibar, Momang and N. M. Zuki, N. M. (2015) Development Concept of A Portable Quality-Confirmation Inspection Device for Automotive Body Parts. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2738-2746. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Bathrinath, S. and Charan, Vadakapur Sai and Ponnambalam, S. G. and Saravanasankar, S. (2019) Identification and evaluation of criteria of agile manufacturing using dematel: a case from an indian metal fabrication industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 61-74. ISSN 2636-9575. (Published)

Beg, Mohammad Sojon and Muhammad Yusri, Ismail and Miah, M. Saef Ullah (2024) Evaluating the Performance of a Visual Support System for Driving Assistance using a Deep Learning Algorithm. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (1). pp. 38-50. ISSN 2462-1943. (Published)

Beg, Mohammad Sojon and Muhammad Yusri, Ismail and Miah, Md Saef Ullah and Mohamad Heerwan, Peeie (2023) Enhancing Driving Assistance System with YOLO V8-Based Normal Visual Camera Sensor. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 226-236. ISSN 2462-1943. (Published)

Belavendram, N. (2010) Application Of Genetic Algorithms For Robust Parameter Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 211-220. ISSN 1985-9325(Print); ISSN: 2180-1606 (Online). (Published)

Benedict, F. and K., Kadirgama and D., Ramasamy and M. M., Noor and Kumar, M. Asok Raj and M. M., Rahman and Sagmesh, B. (2018) Thermal management of vehicle radiator by nanocellulose with one-dimensional analysis. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020043). ISBN 978-0-7354-1787-8

Benedict, F. and Kumar, Amit and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and Mahendran, Samykano and Saidur, R. (2020) Thermal performance of hybrid-inspired coolant for radiator application. Nanomaterials, 10 (6). pp. 1-34. ISSN 2079-4991. (Published)

Benedict Foo, Jing Siong (2020) Hybrid-inspired coolant additive for radiator application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benjunior, B. and A. H., Ahmad and Mohd Rashidi, Maarof and Mohamed Reza Zalani, Mohamed Suffian (2017) Effect of Different Cooling Rates Condition on Thermal Profile and Microstructure of Aluminium 6061. Procedia Engineering, 184. pp. 298-305. ISSN 1877-7058. (Published)

Benjunior, B. and Asnul Hadi, Ahmad and M. M., Rashidi (2019) Direct thermal method pouring temperature and holding time effect on aluminium alloy 6061 microstructure. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-4.. (Unpublished)

Beny, Cahyono (2015) Effects of swirl at intake manifold on engine performance using ethanol fuel blend. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Beriache, M'hamed and Cherki, Brahim Hicham and Mokhtar Saïdia, Leila and Nor Azwadi, Che Sidik and Rizalman, Mamat (2023) Heat transfer enhancement through different heat sink/impinging air jet parameters an experimental approach. Mechanika, 29 (1). pp. 27-33. ISSN 1392-1207. (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Analysis of risk factors for surgical site infection: A case research in an Orthopedic Hospital (Healthcare Industry). Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 98-113. ISSN 2636-9575. (Published)

Bhalaji, R. K. A. and Bathrinath, S. and Ponnambalam, S. G. and Saravanasankar, S. (2020) Analyze the factors influencing human-robot interaction using MCDM method. In: Materials Today: Proceedings; 3rd International Conference on Advanced Materials and Modern Manufacturing, ICAMMM 2020 , 3 - 4 April 2020 , Tamil Nadu, India. pp. 100-104., 39. ISSN 2214-7853

Bhallamudi, Ramkiran and Kumarasamy, Sudhakar and Sundarabalan, Chinnayan Karuppaiyah (2021) Effect of dust and shadow on performance of solar photovoltaic modules : Experimental analysis. Energy Engineering: Journal of the Association of Energy Engineering, 118 (6). pp. 1827-1838. ISSN 0199-8595. (Published)

Billy, Anak Sup and Mohd Farid, Zainudin and Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming (2015) Effect of Rim Angle to the Flux Distribution Diameter in Solar Parabolic Dish Collector. Energy Procedia, 68. pp. 45-52. ISSN 1876-6102 . (Published)

Billy, Anak Sup and Tanti Zanariah, Shamshir Ali and Mohd Farid, Zainudin and R. A., Bakar (2014) Experimental Study of Water Heating Efficiency between Aluminium and Copper Absorber Plate in Solar Flat Plate Collector. Applied Mechanics and Materials, 660. pp. 709-713. ISSN 1662-7482. (Published)

Bishoyi, Deepak and Sudhakar, K. (2017) Experimental Performance of a Direct Evaporative Cooler in Composite Climate of India. Energy and Buildings, 153. pp. 190-200. ISSN 0378-7788. (Published)

Bishoyia, Deepak and Sudhakar, K. (2017) Modeling and Performance Simulation of 100 MW PTC Based Solar Thermal Power Plant in Udaipur India. Case Studies in Thermal Engineering, 10. pp. 216-226. ISSN 2214-157X. (Published)

Bonello, P. and M. F., Hassan (2018) An experimental and theoretical analysis of a foil-air bearing rotor system. Journal of Sound and Vibration, 413. pp. 395-420. ISSN 0022-460X. (Published)

Brapakaran, Paranitharan and Abdullah, N. A. Z. and M. Fouzi, S. M. and Sani, M. S.M. (2019) Correlation of numerical and experimental analysis for dynamic behaviour of a 3 blade propeller structure. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Selangor. pp. 1-10., 1262 (012019). ISSN 1742-6588

Budianto, A. and Kamarul Baharin, Tawi and M., Hussein and Supriyo, Bambang and Ariyono, S. and M. S., Che Kob and Mohd Ezlamy, Zulkifli and Khairuldean, A. K. and Aishah, Daraoh (2012) Microcontroller based proportional derivative plus conditional integral controller for electro-mechanical dual acting pulley continuously variable transmission ratio control. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-14., 36 (1). ISSN 1757-899X

Buhairi, Minhalina Ahmad and Mohd Foudzi, Farhana and Jamhari, Fathin Iliana and Sulong, Abu Bakar and Mohd Radzuan, Nabilah Afiqah and Muhamad, Norhamidi and Mohamed, Intan Fadhlina and Azman, Abdul Hadi and Wan Sharuzi, Wan Harun and M.S.H., Al-Furjan (2023) Review on volumetric energy density: inluence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 23639512. (Published)

C

C. H., Ng and C. F., Lai and S. N. M., Yahaya and S., Shamsudin and S. N., Aqida and F., Sharrifuddin (2019) Effect of initial blank temperature in hot press forming towards 22MnB5 springback failure. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5137-5149. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C. L., Hoo and Sallehuddin, Mohamed Haris and Edwin, C.Y. Chung and Nik Abdullah, Nik Mohamed (2015) New Integral Antiwindup Scheme for PI Motor Speed Control. Asian Journal of Control, 17 (6). pp. 2115-2132. ISSN 1934-6093. (Published)

C. T., Ann and A. R., Razali and N. A. I., Zainudin and Y. W., Leong (2015) Size Effects in Thin Sheet Metal Forming. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10.. (Unpublished)

C. W., Mohd Noor and M. M., Noor and R., Mamat (2018) Biodiesel as alternative fuel for marine diesel engine applications: A review. Renewable & Sustainable Energy Reviews, 94. pp. 127-142. ISSN 1364-0321. (Published)

C. W., Mohd Noor and R., Mamat and Ahmed, Ali Najah (2018) Comparative study of artificial neural network and mathematical model on marine diesel engine performance prediction. International Journal of Innovative Computing, Information and Control, 14 (3). pp. 959-969. ISSN 1349-4198. (Published)

C. W., Mohd Noor and R., Mamat and G., Najafi and Mohd Hafizil, Mat Yasin and C. K., Ihsan and M. M., Noor (2016) Prediction of Marine Diesel Engine Performance by Using Artificial Neural Network Model. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1917-1930. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C. W., Mohd Noor and R., Mamat and G., Najafi and W. B., Wan Nik and M., Fadhil (2015) Application of Artificial Neural Network for Prediction of Marine Diesel Engine Performance. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (012023). ISSN 1757-8981 (Print); 1757-899X (Online)

C. W., Mohd Noor and R., Mamat and M. M., Noor and Samo, K. B. and W. B., Wan Nik (2018) Effects of low proportion palm fatty acids methyl ester blends on the performance and combustion of marine diesel engine. Journal of Biobased Materials and Bioenergy, 12 (2). pp. 153-160. ISSN 1556-6560. (Published)

C. W., Mohd Noor and R., Mamat and Wan Mohd, Norsani and M. M., Noor (2016) An investigation of using palm biodiesel blend on the performance of a stationary marine diesel engine. Defence S&T Technical Bulletin, 9 (2). pp. 86-97. ISSN 1985-6571. (Published)

C. Zafirah, Rosly and Ummu Kulthum, Jamaludin and Nurul Suraya, Azahari (2016) Parametric Study on Efficiency of Archimedes Screw Turbine. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10904-10908. ISSN 1819-6608. (Published)

C.S, Nor Azwadi and N.I.N, Ibrahim (2010) Lattice Boltzmann Numerical Prediction of Natural Convection Heat Transfer in an Inclined Square Enclosure. In: DSFD 2010 , 5-9 July 2010 , CNR- Piazzale Aldo Moro 7- Rome. pp. 1-11..

Carl-Ventolinson, Anak Emley (2008) Fabrication of new cylinder head concept model for 4-stroke motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ch'Ng, S. Q. and Nasir, S. M. and Fathullah, M. and Noriman, N. Z. and Mohd Sazli, Saad (2018) Warpage analysis on thick shell part using response surface methodology (RSM) and bat algorithm (BA) to optimize parameter setting in injection molding process. In: AIP Conference Proceedings; 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018 , 29 - 30 April 2018 , Eden Star Saigon Hotel, Ho Chi Minh, Vietnam. pp. 1-2., 2030 (020167). ISSN 0094-243X ISBN 9780735417526

Chai, Fook Siang (2009) Design of automatic gate mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chai, S. W. and Kamaluddin, M. R. and Ab Rashid, M. F. F. (2022) Optimisation of vehicle routing problem with time windows using Harris Hawks optimiser. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9056 -9065. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Chala, G. T. and A. R. A., Aziz and Hagos, F. Y. (2017) Combined Effect of Boost Pressure and Injection Timing on the Performance and Combustion of CNG in a DI Spark Ignition Engine. International Journal of Automotive Technology, 18 (1). pp. 85-96. ISSN 1229-9138. (Published)

Chala, G. T. and Abd Rashid, Abd Aziz and Hagos, F. Y. (2018) Natural Gas Engine Technologies: Challenges and Energy Sustainability Issue. Energies, 11 (11). pp. 1-44. ISSN 1996-1073. (Published)

Chan, Christoper Sing Kong (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, Neol Christopher (2013) Analysis of spindle cooling system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Chan, See Ling (2009) Design and fabricate an automatic fish feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chang, Tai Ann (2016) Development and analysis of direct current low energy micro-sheet-forming machine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Investigation of wear performance of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1740-1744., 46 (169722). ISSN 2214-7853

Che Dini Marini, Che Mohammad Ishkandar El-Rahimin and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2020) Morphological study of friction stir processed aluminium metal matrix composites. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1745-1748., 46 (169722). ISSN 2214-7853

Che Ku Eddy Nizwan, Che Ku Husin (2022) Establishment of spectral subtraction-based algorithm for experimental modal analysis under operating condition. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fairusham, Ghazali).

Che Ku Eddy Nizwan, Che Ku Husin and Mohd Fairusham, Ghazali and Ahmad Razlan, Yusoff (2020) Ambient suppression in vibration bump test using wavelet-based filter. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012087). ISSN 1757-8981

Che Ku Eddy Nizwan, Che Ku Husin and Mohd Fairusham, Ghazali and Ahmad Razlan, Yusoff (2021) Spectral subtraction-based filter for experimental modal analysis under harmonics excitation force. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8480-8489. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Che Ku Eddy Nizwan, Che Ku Husin and Ong, S. A and Mohd Fadhlan, Mohd Yusof and Mohamad Zairi, Baharom (2013) A wavelet decomposition analysis of vibration signal for bearing fault detection. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9., 50 (012026). ISSN 1757-8981

Che Ku Mohd Faizul, Che Ku Mohd Salleh (2008) Linear quadratic regulator (LQR) speed control for DC motor using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Che Lah, Nurul Akmal (2021) Late transition metal nanocomplexes: Applications for renewable energy conversion and storage. Renewable and Sustainable Energy Reviews, 145 (111103). pp. 1-30. ISSN 1364-0321. (Published)

Che Mohd Akhairil Akasyah, Che Anuar (2008) Development of the can crusher machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Wan, Mohd Noor and R., Mamat and Najafi, G. and Anuar, Abu Bakar and Samo, Khalid (2019) Determination of bio-diesel engine combustion pressure using neural network based model. Journal of Engineering Science and Technology, 14 (2). pp. 909-921. ISSN 1823-4690. (Published)

Che Wan Mohd Noor, Che Wan Othman (2019) Experimental and prediction model of low compression marine diesel engine fuelled with palm biodiesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Che Wan Mohd Noor, Che Wan Othman and R., Mamat and Ali, Obed and Najafi, G. and Wan Nur Diyana, Mansor (2020) Cyclic variation analysis of palm biodiesel fuel in low compression marine diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 75 (2). pp. 43-58. ISSN 2289-7879. (Published)

Che Zafirah, Rosly and Ummu Kulthum, Jamaludin and Khalijah, Khalid and Fatanah, Suhaimi and Normy Norfiza, Abdul Razak and Mohd Basri, Mat Nor and Azrina, Md Ralib (2021) Study on the enhancement of Malaysian ICU centre and introduction of STAR performance. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 63-73.. ISSN 2195-4356 ISBN 9789811641145

Chee, Fang Lit (2017) Development of robot kit for visually impaired. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Chen, J. L. T. and Oumer, A. N. and Azizuddin, Abd Aziz (2020) Stability and density analysis of mango bark and mango leaf nanofluids. In: IOP Conference Series: Materials Science and Engineering; Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863 (012061). ISSN 1757-899X

Chen, James Lau Tze and Azizuddin, Abd Aziz and A. N., Oumer and Mohd Hazwan, Yusof (2019) Energy efficiency analysis in office building through thermal modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (1). ISSN 1757-8981

Chen, Qiqi and Zhang, Bo and Bai, Yutian and Wang, Liheng and M. R. M., Rejab (2020) Review of phononic crystals and acoustic metamaterials. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (012052). ISSN 1757-8981 (Print), 1757-899X (Online)

Chen, Rui (2013) Development of compressed air powered engine system based on subaru ea71 model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Cheow, Kah Chun and Ahmad Shahrizan, Abdul Ghani and Ker, Shao Jiun and Nur Syazwani, Abdul Gani and Muhamad Izdhar, Zaki and Ahmad Fakhri, Ab. Nasir (2018) Electronic water balancing tool. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 573-589. ISBN 9789811087875

Chew, Wi Kang and Muhammad Aizzat, Zakaria (2020) Rover car outdoor localization for navigation tracking using differential global positioning system estimation. In: SympoSIMM 2019: Intelligent Manufacturing and Mechatronics , 8 July 2019 , Melaka, Malaysia. pp. 535-556.. ISSN 2195-4356 ISBN 9789811395390

Chi Hung, Chong and Mohd Azri Hizami, Rasid (2019) Improvement of heat transfer for DC motor windings. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Chia, Ming Xuan (2013) Clustering of frequency-based vibration signal for bearing fault detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chiam, H. W. and Azmi, W. H. and Usri, N. A. and R., Mamat and N. M., Adam (2017) Thermal Conductivity and Viscosity Of Al2o3 Nanofluids for Different Based Ratio of Water and Ethylene Glycol Mixture. Experimental Thermal and Fluid Science, 81. pp. 420-429. ISSN 0894-1777. (Published)

Chilakamarry, Chaitanya Reddy and Dr. Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ahamad Khilji, Irshad (2022) Growth profile study of Escherichia Coli K12 by optical density measurement. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 85..

Chilakamarry, Chaitanya reddy and Mimi Sakinah, A. M. and Zularisam, A. W. and Khilji, Irshad Ahamad and Kumarasamy, Sudhakar (2022) Glycerol Waste to Bio-Ethanol: Optimization of Fermentation Parameters by the Taguchi Method. Journal of Chemistry, 2022. pp. 1-11. ISSN 2090-9071. (Published)

Chin, Siew Choo and Foo, Sheng Tong and Doh, Shu Ing and Jolius, Gimbun and Yuen, Kei Foo and Siregar, J. P. (2017) Potential External Strengthening of Reinforced Concrete Beam Using Natural Fiber Composite Plate. In: 3rd International Conference on Civil, Architectural, Structural and Constructional Engineering (ICCASCE 2017) , 14-16 July 2017 , Seoul, Korea. . (Unpublished)

Ching, Sheng Ooi and Ngui, Wai Keng and Kar, Hoou Hui and Lim, Meng Hee and Leong, Mohd Salman (2019) Review of underground storage tank condition monitoring techniques. In: Engineering Application of Artificial Intelligence Conference 2018 (EAAIC 2018) , 3-5 December 2018 , Sabah, Malaysia. pp. 1-13., 255 (02009). ISSN 2261-236X

Ching, Wai Hoong (2012) Development of straight line robot movement. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Chong, Chern How and Ahmad Shahrizan, Abdul Ghani (2019) Dual image fusion technique for underwater image contrast enhancement. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-6.. (Unpublished)

Chong, Yie Kai and Liang, Yong Yeow and Lau, Woei Jye and Adolfo, Gustavo (2022) Modelling flow and mass transfer inside spacer-filled channels for reverse osmosis membrane modules. In: 60 Years of the Loeb-Sourirajan Membrane. Principles, New Materials, Modelling, Characterization, and Applications . Elsevier, India, pp. 413-432. ISBN 978-0-323-89977-2

Choon, Cheow Shek and Ismayuzri, Ishak (2022) Feasibility study of CO, CO2, NO2 and O2 sensors for hazardous gas detection system in vehicle cabin. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 537-547., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Choon, Lih Hoo and Sallehuddin, Mohamed Haris and Edwin Chin, Yau Chung and Nik Abdullah, Nik Mohamed (2015) Steady-State Integral Proportional Integral Controller for PI Motor Speed Controllers. Journal of Power Electronics, 15 (1). pp. 177-189. ISSN 1598-2092. (Published)

Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and Muhammad Aizzat, Zakaria and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) Pallet-level classification using principal component analysis in ensemble learning model. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 23-27. ISSN 2637-0883. (Published)

Chowdhury, M. A. and Debnath, U. K. and Kamruzzaman, M. and Nuruzzaman, D. M. and Mia, Md. Shahin (2019) Analysis and optimization of turned surfaces of AISI 1060 using ANOVA and regression. Tribology in Industry, 41 (1). pp. 23-32. ISSN 0354-8996. (Published)

Chowdhury, M. A. and Debnath, U. K. and Mia, M. S. and Nuruzzaman, D. M. (2017) Experimental and characterisation of eroded surfaces of T-glass fibre embedded in polyester matrix. International Journal of Materials Engineering Innovation, 8 (3-4). pp. 159-172. ISSN 1757-2754. (Published)

Chowdhury, M. A. and Debnath, U. K. and Nuruzzaman, D. M. and Islam, Monirul (2017) Erosion of Mild Steel for Engineering Design and Applications. Journal of Bio- and Tribo-Corrosion, 3 (3). pp. 1-17. ISSN 2198-4220(print); 2198-4239(online). (Published)

Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam K. and Nuruzzaman, D. M. and Islam, Md. Monirul (2016) Experimental Analysis of Aluminum Alloy under Solid Particle Erosion Process. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 230 (12). pp. 1516-1541. ISSN 2041-305X. (Published)

Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam Kumar and Nuruzzaman, D. M. and Islam, Md. Monirul (2017) Study of Erosive Surface Characterization of Copper Alloys under Different Test Conditions. Surfaces and Interfaces, 9. pp. 245-259. ISSN 2468-0230. (Published)

Chua, Wei Ming and Khairul Fikri, Muhammad (2021) Development of walking robot using compliance mechanism. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 49-56. ISSN 2637-0883. (Published)

Chuan, Zun Liang and Wan Nur Syahidah, Wan Yusoff and Azlyna, Senawi and Mohd Akramin, Mohd Romlay and Fam, Soo-Fen and Shinyie, Wendy Ling and Ken, Tan Lit (2022) A comparative effectiveness of hierarchical and nonhierarchical regionalisation algorithms in regionalising the homogeneous rainfall regions. Pertanika Journal of Science and Technology, 30 (1). pp. 319-342. ISSN 0128-7680. (Published)

Cindy, Olin and Hassan, Ibrahim and Azri, Alias and Ahmmad Shukrie, Md Yudin and F., Basrawi (2015) A Study on a Higher Heating Value of Agricultural Waste in Malaysia. In: World Conference on Engineering & Applied Sciences , 30-31 May 2015 , Kuala Lumpur. . (Unpublished)

Cionita, Tezara and Siregar, Januar Parlaungan and Mohammad Hazim, Mohamad Hamdan and Rihayat, Teuku and Bachtiar, Dandi and Fitriyana, Deni Fajar and Prayitno, P. (2021) Influence of layering sequences on tensile properties of hybrid woven Jute/Ramie fibre reinforced polyester composites. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1836-1841., 48. ISSN 2214-7853

Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)

Crispin, Julip Jainul (2009) The effect of chatter on cutting tool in CNC milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Cuce, Erdem and Cuce, Pinar Mert and Carlucci, Salvatore and Sen, Harun and Sudhakar, Kumarasamy and Md., Hasanuzzaman and Daneshazarian, Reza (2022) Solar chimney power plants : A review of the concepts, designs and performances. Sustainability (Switzerland), 14 (3). pp. 1-66. ISSN 2071-1050. (Published)

Cuce, Erdem and Cuce, Pinar Mert and Sen, Harun and Sudhakar, K. and Berardi, Umberto and Serencam, Ugur (2021) Impacts of ground slope on main performance figures of solar chimney power plants: a comprehensive CFD research with experimental validation. International Journal of Photoenergy, 2021 (6612222). pp. 1-11. ISSN 1687-529X (Online). (Published)

Cuce, Erdem and Saxena, Abhishek and Cuce, Pinar Mert and Sen, Harun and Guo, Shaopeng and Sudhakar, K. (2021) Performance assessment of solar chimney power plants with the impacts of divergent and convergent chimney geometry. International Journal of Low-Carbon Technologies, 16 (3). 704 -714. ISSN 1748-1325. (Published)

Cuce, Pinar Mert and Cuce, Erdem and Sudhakar, Kumarasamy (2022) A systematic review of thermal insulation performance of hollow bricks as a function of hollow geometry. International Journal of Ambient Energy, 43 (1). pp. 4406-4415. ISSN 0143-0750. (Published)

D

D., Ramasamy and Goh, Chin Yuan and R. A., Bakar and Z. A., Zainal (2014) Validation of Road Load Characteristic of a Sub-Compact Vehicle by Engine Operation. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1820-1831. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

D., Ramasamy and Khoo, Aik Soon and Z. A., Zainal and Briggs, Horizon Walker-Gitano (2012) Variation of Air Flow Pattern Through Dissimilar Valve Lift In A Spark Ignition Engine. Journal of the Chinese Institute of Engineers, 36 (8). pp. 1-14. ISSN 0253–3839 (print); 2158–7299 (online). (Published)

D., Ramasamy and Samykano, Mahendran (2010) Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design By Simulation And Experimental Techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy and Samykano, Mahendran and K., Kadirgama (2010) Design Of Compressed Natural Gas Mixer Using Computational Fluid Dynamics. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Devandran and A. N., Oumer and N. T., Rao and F., Basrawi and Hassan, Ibrahim (2017) Investigation on Effect of Some Operating Conditions on Flow and Heat Transfer of Supercritical Co2 In Helical Coiled Tubes Via Multilevel Factorial Methodology. Malaysian Journal of Industrial Technology, 2 (2). pp. 23-30. ISSN 2462-2540. (Published)

D., Mathivanan and H., Norfazilah and J. P., Siregar and M. R. M., Rejab and Bachtiar, Dandi and C., Tezara (2016) The Study of Mechanical Properties of Pineapple Leaf Fibre Reinforced Tapioca Based Bioplastic Resin Composite. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00016). ISSN 2261-236X

D., Ramasamy and C.Y., Goh and K., Kadirgama and F., Benedict and M. M., Noor and G., Najafi and A., P.Carlucci (2017) Engine Performance, Exhaust Emission And Combustion Analysis Of A 4-Stroke Spark Ignited Engine Using Dual Fuel Injection. Fuel, 207. pp. 719-728. ISSN 0016-2361. (Published)

D., Ramasamy and K., Kadirgama and M. M., Noor Computational Analysis Of Dissimilar Valve Lift (DVL) Swirl On A Bi-Fuel Compressed Natural Gas (CNG) Engine. 9th International Conference on Advanced Computational Engineering and Experimenting. (Published)

D., Ramasamy and K., Kadirgama and M. M., Rahman and M. M., Noor (2016) Wood Based Cellulose Nano Particles for Automotive Radiator. Auto INEXSS Issue 11:2016, 11 . pp. 25-26.

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

D., Ramasamy and K., Kadirgama and Neshabran, Ramachandran and W. H., Azmi (2018) Analysis of dynamic viscosity via experiment and empirical correlation through response surface methodology (rsm) for cellulose nanocrystal (cnc) dispersed in ethylene glycol- water mixture. In: 26th Annual international conference on composites or nano engineering , 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

D., Ramasamy and K., Kadirgama and W. H., Azmi and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Prediction modelling for Cellulose Nanocrystal (CNC) dispersed in ethylene glycol- water mixture. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-2.. (Unpublished)

D., Ramasamy and Kaaliarasan, Ramachandran and G., Kadirgama and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Experimental investigation and empirical model development of thermal conductivity for cellulose nanocrystal (CNC) based nanofluid. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-4.. (Unpublished)

D., Ramasamy and Kaaliarasan, Ramachandran and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Investigation of Dynamic Viscosity Through Experiment and Correlation Determination through Response Surface Methodology for Cellulose Nanocrystal (Cnc) Dispersed in Ethylene Glycol-Water Mixture. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-3.. (Unpublished)

D., Ramasamy and M. M., Noor and M. M., Rahman and W. G. B. , Horizon (2016) Analysis of Modifications on a Spark Ignition Engine for Operation with Natural Gas. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00031). ISSN 2261-236X

D., Ramasamy and M. M., Rahman and K., Kadirgama and M. M., Noor and Azmi, W. H. and Mahendran, Samykano and W. S., Wan Harun (2018) Green engine coolant (GEC): cellulose nanocrystals as engine coolant process. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

D., Ramasamy and Mahendran, Samykano and Z. A. A., Karim and Nagarajan, T. (2011) Design of valveless micropump using preliminary characteristics from fluid flow. Journal of Applied Sciences, 11 (11). pp. 2072-2075. ISSN 1812-5654. (Published)

D., Ramasamy and Mahendran, Samykano and Zainal Ambri, Abdul Karim and T., Nagarajan (2010) Design of Valve Less Micropump Using Preliminary Characteristics from Fluid Flow. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 1589-1592., II. ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

D., Ramasamy and Mahendran, Samykano and Zamri, Mohamed and S., Vijayan (2010) Design Optimization of Air Intake System (AIS) of 1.6L Engine by Adding Guide Vane. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 999-1003., 2181. ISSN ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

D., Ramasamy and Mohanesan, K and K., Kadirgama and M. M., Noor and M. M., Rahman (2017) Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4496-4507. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

D., Ramasamy and R. A., Bakar and Mohd Fadzil, Abdul Rahim and M. M., Noor (2008) Comparative Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design Using Simulation And Experimental Techniques. In: Proceedings of the 4th IASTED International Conference, Power And Energy Systems (AsiaPES 2008) , 2-4 April 2008 , Langkawi, Malaysia. pp. 359-362..

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

D. F., Fitriyana and F. W., Nugraha and M. B., Laroybafih and R., Ismail and A. P., Bayuseno and R. C., Muhamadin and M. B., Ramadan and A. R. A., Qudus and J. P., Siregar (2022) The effect of hydroxyapatite concentration on the mechanical properties and degradation rate of biocomposite for biomedical applications. In: IOP Conference Series: Earth and Environmental Science, The 10th Engineering International Conference , 23 September 2021 , Virtual Conference, Semarang, Indonesia. pp. 1-9., 969 (012045). ISSN 1755-1307

D. J., Krishna Kishore and M. R., Mohamed and K., Sudhakar and K., Peddakapu (2022) An improved grey wolf optimization based MPPT algorithm for photovoltaic systems under diverse partial shading conditions. In: Journal of Physics: Conference Series, Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021 , 16-17 December 2021 , Virtual Conference. pp. 1-14., 2312 (012063). ISSN 1742-6588

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853

D. N., Noor and Azim, Arshad and Z., Azran and Hassan, Ibrahim and F., Basrawi (2016) A Review on the Recent Development of Solar Absorption and Vapour Compression based Hybrid Air Conditioning with Low Temperature Storage. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-9., 38 (02007). ISSN 2261-236X

Da, Wen Ge (2010) A Review On Continuously Variable Transmissions Control. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Daelami, Aminuddin (2008) Design and fabricate test rig structure for an automotive turbocharger testing apparatus. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Daing Mohamad Nafiz, Daing Idris (2014) Fundamental study on bending strength on thin-rimmed helical gears with web arrangements. PhD thesis, Tottori University (Contributors, UNSPECIFIED: UNSPECIFIED).

Daing Mohamad Nafiz, Daing Idris and Ahmad Fitri, Yusop and F., Basrawi and Mohd Azri Hizami, Rasid and Muhammad Hadi, Hassan and Samad, Rahin (2018) Chassis dynamometer to analyse performance of electric two wheelers (ETW). In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Daing Nasir, Ibrahim (2013) Advancing automotive agenda. New Straits Times, (15 Oc . p. 6.

Damirchi, Hojjatollah and G., Najafi and Alizadehnia, Siamak and R., Mamat and Che Sidik, Nor Azwadi and Azmi, W. H. and M. M., Noor (2016) Micro Combined Heat and Power to Provide Heat and Electrical Power using Biomass and Gamma-type Stirling Engine. Applied Thermal Engineering, 103. pp. 1460-1469. ISSN 1359-4311. (Published)

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin Wax Removal from Metal Injection Moulded Cocrmo Alloy Compact by Solvent Debinding Process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-10., 257 (012020). ISSN 1757-899X

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin wax removal from metal injection moulded cocrmo alloy compact by solvent debinding process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012020). ISSN 1757-8981

Dandi, Bachtiar Study of thermo-mechanical properties of sugar palm fibre reinforced thermoplastic polyurethane composites for use as exterior material in automotive industry. , [Research Book Profile: Research Report] (Unpublished)

Danial, Mohamed and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman and Mohd Ashraf, Mohamed Ismail (2019) On the effect of bio-corrosion of copper electrode in Andrassy bentonite as grounding material. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-2.. (Unpublished)

Danial Haziq, Rizal and Wan Hasbullah, Mohd Isa and Muhammad Amirul, Abdullah and Abdul Majeed, Anwar P. P. and Norasmiza, Mohd (2023) Effects of varied planar dimensions of IPMC on simulated actuation using COMSOL. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 1-5. ISSN 2637-0883. (Published)

Dara, Affydah and A. N. M., Rose and M. F. F., Ab Rashid and N. M. Z., Nik Mohamed (2021) Review of lean manufacturing with IR4.0 in automotive industry. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-8., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Darshana, Kumari Raguphaty and Shamsuddin, Baharin and Faiz, Mohd Turan (2019) Technology sharing through university industry collaboration: Innovation in Malaysian manufacturing landscape. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 24-30. ISSN 2636-9575. (Published)

Das, Likhan and Aslfattahi, Navid and Khairul, Habib and Saidur, R. and Das, Anupom and Kadirgama, Kumaran (2023) Thermohydraulic performance investigation of a heat exchanger with combined effect of ribbed insert and Therminol55/MXene+Al2O3 nanofluid : A numerical two-phase approach. Heliyon, 9 (e14283). pp. 1-17. ISSN 2405-8440. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Rahman, Saidur and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol 55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Saidur, Rahman Md and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol®55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Daud, R. and M. Z. H., Jantan and Mas Ayu, Hassan and A., Shah (2020) Investigation of fatigue failure performance of ankle implant mobile bearing using finite element method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference on Vibration, Sound and System Dynamics (ICVSSD 2019) , 1-3 December 2019 , Penang, Malaysia. pp. 1-10., 815 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Dayang Hjh Tiawa, Awang Hj Hamid and Abdul Hafidz, Omar and Adam, Jait and Norashikin, Yusof and Zulkifli, Ahmad@Manap (2019) Prediction of fatigue level during exercise in virtual reality environment for hajj pilgrimage. In: Seminar Serantau Pendidikan Tinggi Islam (SEIPTI 2019) , 6-7 November 2019 , UNISSA, Brunei. pp. 669-681.. (Unpublished)

Debbarmaa, Mary and Sudhakar, K. and Baredar, Prashant (2017) Thermal Modeling, Exergy Analysis, Performance of BIPV and BIPVT: A Review. Renewable and Sustainable Energy Reviews, 73. pp. 1276-1288. ISSN 1364-0321. (Published)

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2017) The Experimental Characteristics and Evaluation of Nylon-12 in Erosion Process. Journal of Testing and Evaluation, 45 (3). pp. 773-787. ISSN 0090-3973. (Published)

Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2016) Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers. Materials Performance and Characterization, 5 (1). pp. 312-329. ISSN 2165-3992 . (Published)

Deepak, Bishoyi and Sudhakar, K. (2017) Modeling and Performance Simulation of 100 MW LFR Based Solar Thermal Power Plant in Udaipur India. Case Studies in Thermal Engineering, 10. pp. 216-226. ISSN 2214-157X. (Published)

Devarajan, Ramasamy and Sandhya, Madderla and Kumaran, Kadirgama and Mahendran, Samykano and Sudhakar, Kumarasamy and Md. Mustafizur, Rahman and Wan Sharuzi, Wan Harun (2021) High heat transfer using hybrid engine coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Dhanushkodi, S. and Wilson, Vincent H. and Sudhakar, K. (2017) Mathematical modeling of drying behavior of cashew in a solar biomass hybrid dryer. Resource-Efficient Technologies, 3 (4). pp. 359-364. ISSN 2405-6537. (Published)

Dina Diyana, Rastam Tan and Nor Salwana, Mohammad Idris (2021) PM Ir. Dr. Mohd Hafizi, Athirah dinobatkan pemenang Anugerah Terbaik CITREX 21. UMP News .

Dipta, Das and Asif Khan, Shakir and Sah Golam, Rabbani and Mostafijur, Rahman and Syamimi Mardiah, Shaharum and Sabira, Khatun and Norasyikin, Fadilah and Khandker, M. Qaiduzzaman and Md. Shariful, Islam and Md. Shohel, Arman (2019) A comparative analysis of four classification algorithms for university students performance detection. In: 5th International Conference on Electrical, Control and Computer Engineering (INECCE 2019) , 29-30 July 2019 , Swiss Garden Kuantan. pp. 1-12.. (Unpublished)

Dondariya, Chandrakant and Porwal, Deepak and Awasthi, Anshul and Shukla, Akash Kumar and Sudhakar, K. and S. R., Murali Manohar and Bhimte, Amit (2018) Performance simulation of grid-connected rooftop solar PV system for small households: A case study of Ujjain, India. Energy Reports, 4. pp. 546-553. ISSN 2352-4847. (Published)

Donny, Anak Ju (2009) Two wheels mobile robot control using linear quadratic regulator and pole placement controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Dulfharah, Nizam Memth Ali (2009) Effect of nozzle diameter on jet impingement cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Dwivedi, Pushpendu and Ganesh, Sujay Ashwinraj and Kumarasamy, Sudhakar and Soni, Archana and Priya, S. Shanmuga (2023) Thermal and electrical performance of uncooled, nature-cooled, and photovoltaic thermal module. International Journal of Photoenergy, 2023 (4720545). pp. 1-12. ISSN 1687-529X (Online). (Published)

Dzulaika Nubaillah, Noor (2019) Techno-economic analysis in optimisation of hybrid air-conditioning system combining chilled water storage and solar water heater. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

E

Edi, Syafri and Jamaluddin, Jamaluddin and Nasmi, Herlina Sari and Melbi, Mahardika and Lisman, Suryanegara and Rafles, Sinaga and Ferriawan, Yudhanto and Rahadian, Zainul and Agus, Nugroho and Anish, Khan and Mohammad, A. Wazzan (2023) Effect of ultrafine grinding and ultrasonication duration on the performance of polyvinyl alcohol (PVA) agave gigantea cellulose micro fiber (CMF) bio-composite film. Journal Of Natural Fibers, 20 (2192545). pp. 1-19. ISSN 1544-0478. (Published)

Ee, Ken-ji and Ahmad Fakhri, Ab. Nasir and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Nur Hafieza, Ismail (2021) The animal classification: An evaluation of different transfer learning pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 27-31. ISSN 2637-0883. (Published)

Efendee, A. M. and Azmir, Azhari and Hasnain, A. R. and Zainal Ariffin, S. and Mukhtar, M. (2021) Investigation of magnetic field effect on MRR, EWR and surface roughness during EDM of AISI420 tool Steel. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-11., 1068 (1). ISSN 1757-899X

Effizul Syafrin, Abu Bakar (2008) Labview PID speed controller for DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Daing Mohamad Nafiz, Daing Idris and Khairul, Habib and Mohd Hazwan, Yusof (2018) Analysis on the Performance of a Prototype of Thermoelectric based Power Generation System. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (02019). ISSN 2261-236X

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Ibrahim, Thamir Khalil and M., Ishak and T. M., Yusof and Bagaber, Salem Abdullah (2020) Enhancing the performance of a thermo-electric generator through multi-objective optimisation of heat pipes-heat sink under natural convection. Energy Conversion and Management, 209 (112626). pp. 1-20. ISSN 0196-8904. (Published)

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Thamir K., Ibrahim and Shaharin, A. Sulaiman and M., Ishak (2018) Study on the Performance of a Thermo-Electric Generation Model with Two Different Materials of Heat Pipe-Heat Sink. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (04009). ISSN 2261-236X

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Thamir Khalil, Ibrahim (2017) Investigation on the performance of a prototype of thermo-electric generation with heat pipe-heat sink. In: UTP-UMP Symposium on Energy Systems, SES 2017 , 26-27 September 2017 , Perak, Malaysia. pp. 1-7., 131. ISSN 2261236X

Elghool, Ali and F., Basrawi and Ibrahim, Thamir K. and Ibrahim, Hassan and M., Ishak and Mohd Hazwan, Yusof and Bagaber, Salem Abdullah (2020) Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection. Energy, 208 (118270). pp. 1-21. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Elghool, Ali Elhade (2020) Experimental study and optimization on thermoelectric generator combined with heat pipe-heat sink. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Elie Sem, Semilin (2009) Investigation and modelling prediction on surface roughness of titanium in dry turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Elmahaishi, Madiha Fathi and Raba’ah Syahidah, Azis and Ismayadi, Ismail and Muhammad Syazwan, Mustaffa and Zulkifly, Abbas and Khamirul Amin, Matori and Farah Diana, Muhammad and Nor Kamilah, Saat and Rodziah, Nazlan and Idza Riati, Ibrahim and Nor Hapishah, Abdullah and Nurhidayaty, Mokhtar (2021) Structural, electromagnetic and microwave properties of magnetite extracted from mill scale waste via conventional ball milling and mechanical alloying techniques. Materials, 14 (22). pp. 1-24. ISSN 1996-1944. (Published)

Eltayeb, Ahmed and Mohd Fua’ad, Rahmat and Mohd Ariffanan, Mohd Basri and Mansour, Mohammed A. M. (2020) Adaptive sliding mode control design for the attitude of the quadrotor unmanned aerial vehicle (UAV). In: IOP Conference Series: Materials Science and Engineering; 2019 Sustainable and Integrated Engineering International Conference, SIE 2019 , 8 - 9 December 2019 , The Everly Putrajaya, Putrajaya. pp. 1-8., 884 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Emilawati, Othman and Nik Nor Fatihah, Nik Mood and Radhiyah, Abd Aziz (2022) Investigation the effect of different fraction EG : H the stability of tio2 nanofluid. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 118..

Enti Nashila, Riazuddin (2012) Input shaping and PID controller for rotary crane. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Epin, Vorathin (2021) Accuracy improvement of rubber-based diaphragm fibre bragg grating pressure sensors. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Hafizi, Zohari,).

Erdiwansyah and Leman, A. M. and Muhamad Norkhizan, Abdullah and Mulyadi, L. and Fitri, Khoerunnisa and Sardjono, R. E. and Maulana, M. I. and M. S. M., Sani (2019) Performance of a small diesel engine by experimental and numerical simulation analysis. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-12., 506 (012029). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah and R., Mamat and M. S. M., Sani and Sudhakar, K. and Asep, Kadarohman and R.E., Sardjono (2019) An overview of Higher alcohol and biodiesel as alternative fuels in engines. Energy Reports, 5. pp. 467-479. ISSN 2352-4847. (Published)

Erdiwansyah, . and Asri, Gani and Nurdin, M. H. and Rizalman, Mamat and R. E., Sarjono (2022) Policies and laws in the application of renewable energy Indonesia: A reviews. AIMS Energy, 10 (1). pp. 23-44. ISSN 2333-8326. (Published)

Erdiwansyah, . and Leman, A.M. and Khoerunnisa, F. and Sardjono, R. E. and Munawir, . and Maulana, M. I. and M. S. M., Sani (2019) Engine modelling of a single cylinder diesel engine fuelled by diesel-methanol blend. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-14., 506 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah, . and M. S. M., Sani and Mahidin, . and M., Zaki and Asep, Kadarohman and Muhibbuddin, . and R. E, Sardjono and Asri, Gani (2021) Experimental investigation on noise and vibrations of biodiesel-butanol blends for diesel engine. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-8., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah, . and Mahidin, . and Ahmad Fitri, Yusop and Muhammad Zaki, . and R., Mamat and Muhibbuddin, . and Ratna Eko, Sardjono and Nor Azwadi, Che Sidik and Husni, Husin (2021) Investigation of the effect biodiesel-butanol-water fuel blend pressure on a single-cylinder diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). 39 -47. ISSN 2289-7879. (Published)

Erdiwansyah, . and Mahidin, . and Husni, Husin and Muhammad Faisal, . and Muhtadin, . and Asri, Gani and R. E., Sardjono and Rizalman, Mamat (2021) The modification of the perforated plate in the fluidized-bed combustor to analyze heat convection rate and temperature. Journal of Combustion, 2021 (4084162). pp. 1-8. ISSN 2090-1968. (Published)

Erdiwansyah, . and Mahidin, . and Husni, Husin and Nasaruddin, . and Muhtadin, . and Muhammad, Faisal and Asri, Gani and Usman, . and R., Mamat (2021) Combustion efficiency in a fluidized-bed combustor with a modified perforated plate for air distribution. Processes, 9 (9). pp. 1-12. ISSN 2227-9717. (Published)

Erdiwansyah, . and Mahidin, . and M. S. M., Sani and Rizalman, Mamat and Asri, Gani and Munawir, . and Susmanto, . (2022) Effect of vibration and noise on spark ignition engines of methanol fuel blended with gasoline. Journal of Scientific & Industrial Research, 81 (1). pp. 32-38. ISSN 0975-1084 (Online). (Published)

Erdiwansyah, . and Mahidin, . and M. S. M., Sani and Rizalman, Mamat and Asri, Gani and Munawir, . and Susmanto, . (2022) Effect of vibration and noise on spark ignition engines of methanol fuel blended with gasoline. Journal of Scientific & Industrial Research, 81. 32 -38. ISSN 0022-4456. (Published)

Erdiwansyah, . and Mahidin, . and R., Mamat and M. S. M., Sani and Fitri, Khoerunnisa and Asep, Kadarohman (2019) Target and demand for renewable energy across 10 ASEAN countries by 2040. The Electricity Journal, 32 (10). pp. 1-10. ISSN 1040-6190. (Published)

Erdiwansyah, . and Muhammad, Zaki and Mahidin, . and R., Mamat and Ahmad Fitri, Yusop and Herri, Susanto and Asep, Kadarohman and Fitri, Khoerunnisa and Ratna, Eko Sardjon (2020) The effects of using diesel-citronella fuel blend on the emission and fuel consumption for single-cylinder diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (2). pp. 1-15. ISSN 2289-7879. (Published)

Erdiwansyah, . and R., Mamat and M. S. M., Sani and Sudhakar, K. (2019) Renewable energy in Southeast Asia: Policies and recommendations. Science of The Total Environment, 670. pp. 1095-1102. ISSN 0048-9697. (Published)

Erdiwansyah, E. and Gani, Asri and Rizalman, Mamat and Mahidin, M. and Sudhakar, Kumarasamy and S. M., Rosdi and Husin, Husni (2022) Biomass and wind energy as sources of renewable energy for a more sustainable environment in Indonesia: a review. Archives of Environmental Protection, 48 (3). pp. 57-69. ISSN 2083-4772. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husin, Husni and Faisal, Muhammad and Usman, Usman and Muhtadin, Muhtadin and Gani, Asri and Rizalman, Mamat (2022) Modification of perforated plate in fluidized-bed combustor to provide sufficient air supply in the combustion. Frontiers in Heat and Mass Transfer (FHMT), 18 (25). pp. 1-6. ISSN 2151-8629. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husin, Husni and Nasaruddin, Nasaruddin and Gani, Asri and Faisal, Muhammad and Muhtadin, Muhtadin and Zaki, Muhammad and Rizalman, Mamat (2023) Comparison of temperature, radiation rate, heat loss, furnace and thermal efficiencies of different plates in the FBC combustion chamber. Frontiers in Heat and Mass Transfer, 20 (29). pp. 1-9. ISSN 2151-8629. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husni, Husin and Nasaruddin, Nasaruddin and Asri, Gani and Rizalman, Mamat (2023) Modification of perforated plate in fluidized-bed combustor chamber through computational fluid dynamics simulation. Results in Engineering, 19 (101246). pp. 1-12. ISSN 2590-1230. (Published)

Esfahani, J.A. and Karbasian, H.R. (2012) Optimizing the Shape of Rotor Blades for Maximum Power Extraction in Marine Current Turbines. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 722-729. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Eswaramoorthi, Vijayamurugan and Kuan, Garry and Mohamad Razali, Abdullah and Anwar, P. P. Abdul Majeed and Suppiah, Pathmanathan K. and Musa, Rabiu Muazu (2022) Design and validation of a virtual physical education and sport science–related course: A learner’s engagement approach. International Journal of Environmental Research and Public Health, 19 (13). pp. 1-16. ISSN 1661-7827. (Published)

Eswaramoorthi, Vijayamurugan and Muhammad Zulhusni, Suhaimi and Mohamad Razali, Abdullah and Zulkefli, Sanip and Anwar, P. P. Abdul Majeed and Muhammad Zuhaili, Suhaimi and Clark, Cain C. T. and Musa, Rabiu Muazu (2022) Association of physical activity with anthropometrics variables and health-related risks in healthy male smokers. International Journal of Environmental Research and Public Health, 19 (12). pp. 1-15. ISSN 1661-7827. (Published)

Ezahan Hilmi, Zakaria and Mohd Azraai, Mohd Razman and Jessnor Arif, Mat Jizat and Ismail, Mohd Khairuddin and Zelina Zaiton, Ibrahim and Anwar, P. P. Abdul Majeed (2021) Time-series classification vegetables in detecting growth rate using machine learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 1-5. ISSN 2637-0883. (Published)

Ezazi, Mohammadamin and Quazi, Moinuddin Mohammed (2023) Recent developments in two-dimensional materials-based membranes for oil–water separation. Membranes, 13 (677). pp. 1-24. ISSN 2077-0375. (Published)

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ezzaty Faridah Nor, Mohd Hussin and Ping, Jack Soh and Mohamed Fareq, Abdul Malek and Mohd Faizal, Jamlos and Muhammad Ameerul Fikrey, Fauzi and H., Lago and Hasliza, A. Rahim (2017) A wearable textile dipole for search and rescue application. In: 5th International Conference on Electronic Devices, Systems and Applications (ICEDSA) , 6-8 December 2016 , Ras Al Khaimah, United Arab Emirates. pp. 1-4.. ISBN 978-1-5090-5306-3

Ezzaty Faridah Nor, Mohd Hussin and Ping, Jack Soh and Mohd Faizal, Jamlos and Herwansyah, Lago and Azremi, Abdullah Al-Hadi and Mohd Hafiz Fazalul, Rahiman (2017) A Wideband Textile Antenna with a Ring-slotted AMC Plane. Applied Physics A, 123 (46). pp. 1-7. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

F

F., Basrawi and Yamada, Takanobu and Obara, Shin’ya (2013) Theoretical Analysis of Performance of a Micro Gas Turbine Co/Trigeneration System for Residential Buildings in a Tropical Region. Energy and Buildings, 67. pp. 108-117. ISSN 0378-7788. (Published)

F., Basrawi and A. Rahman, A Hamid and Mohd Ridzuan, Baharin and Mohd Najib, Mohd Noordin and Mohd Hazwan, Yusof (2017) A preliminary study on the thermal performance of a ventilated honey cassette for stingless bees. In: UTP-UMP Symposium on Energy Systems, SES 2017 , 26-27 September 2017 , Perak, Malaysia. pp. 1-6., 131. ISSN 2261236X

F., Basrawi and Asnul Hadi, Ahmad and Daing Mohamad Nafiz, Daing Idris and Mohd Rashidi, Maarof and Chand, M. R. R. and Ahmad Syazwan, Ramli (2017) Engineering economic analysis of meliponiculture in Malaysia considering current market price. In: UTP-UMP Symposium on Energy Systems, SES 2017 , 26-27 September 2017 , Perak, Malaysia. pp. 1-7., 131. ISSN 2261236X

F., Basrawi and Hassan, Ibrahim and Chand, M. R. R. and Yamada, Takanobu (2014) Effect Of Operation Strategies On The Economic Performance Of A Hybrid Photovoltaic-Micro Gas Turbine Trigeneration System. In: Proceedings of the 4th International Conference on Production, Energy and Reliability (ICPER2014) , 3-5 June 2014 , Kuala Lumpur Convention Centre, Kuala Lumpur. pp. 1-6..

F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Lee, Giok Chui (2013) Optimum Thickness of Wall Insulations and Their Thermal Performance for Buildings in Malaysian Climate. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1207-1217. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

F., Basrawi and Hassan, Ibrahim and Yamada, Takanobu (2015) Optimal Unit Sizing of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems in a Sewage Treatment Plant. Energy Procedia, 75. pp. 1052-1058. ISSN 1876-6102 . (Published)

F., Basrawi and Ibrahim, Thamir K. and Khairul, Habib and Yamada, Takanobu (2016) Effect of Operation Strategies on the Economic and Environmental Performance of a Micro Gas Turbine Trigeneration System in a Tropical Region. Energy, 97. pp. 262-272. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

F., Basrawi and Ibrahim, Thamir K. and Sathiyaseelan, Surendran S. and A. A., Razak (2018) Experimental investigation on performance of solar-powered attic ventilation. In: Sustainable Thermal Power Resources Through Future Engineering. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-19. ISBN 978-981-13-2968-5

F., Basrawi and Izwan, Ismail and Thamir Khalil, Ibrahim and Daing Mohamad Nafiz, Daing Idris and Shahrani, Anuar (2016) A Study On The Power Generation Potential Of Mini Wind Turbine In East Coast Of Peninsular Malaysia. In: International Tropical Renewable Energy Conference (i-TREC) 2016 , 26-28 October 2016 , Bogor, Indonesia. pp. 1-9.. (Unpublished)

F., Basrawi and K., Habib and Hassan, Ibrahim and Lee, Giok Chui (2015) Effect of Solar Fraction on the Economic Performance of a Solar Air Conditioning by an Adsorption Chiller. Jurnal Intelek, 9 (2). pp. 14-20. ISSN 2231-7716. (Published)

F., Basrawi and M. R. R., Chand and K. H., Koo and Ibrahim, Thamir K. (2016) Theoretical Analysis on the Economic Performance of Micro Gas Turbine-Trigeneration System with Different Operation Strategies for Residential Building in a Tropical Region. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38 (01003). ISSN 2261-236X

F., Basrawi and Takanobu, Yamada and Kimio, Nakanish and Hideaki, Katsumata (2012) Analysis of the Performances of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems (MGT-CGSs) in Middle- and Small-Scale Sewage Treatment Plants: Comparison of Performances and Optimization of Mgts with Various Electrical Power Outputs. Energy, 38. pp. 291-304. ISSN 0360-5442. (Published)

F., Basrawi and Thamir K., Ibrahim and Giok, Chui Lee and Khairul, Habib and Hassan, Ibrahim (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. Journal of Solar Energy Engineering, 137 (6). 061009-1. ISSN 0199-6231 (print); 1528-8986 (online). (Published)

F., Basrawi and Thamir K., Ibrahim and Khairul, Habib and Yamada, Takanobu and D. M. N., D. Idris (2017) Techno-Economic Performance of Biogas-Fueled Micro Gas Turbine Cogeneration Systems in Sewage Treatment Plants: Effect of Prime Mover Generation Capacity. Energy, 124. pp. 238-248. ISSN 1876-6102. (Published)

F., Basrawi and Yamada, Takanobu (2012) Energetic and Economic Analysis of a Micro Gas Turbine Cogeneration System in Residential Buildings in a Tropical Region. In: Malaysian Technical Universities Conference on Engineering and Techology , 20-21 November 2012 , Hotel Seri Malaysia, Kangar Perlis. . (Unpublished)

F., Benedict and K., Kadirgama and D., Ramasamy and M. M., Noor and Mahendran, Samykano and M. M., Rahman and Zakri, Ghazalli and Sagmesh, B. (2019) Nanocellulose as heat transfer liquid in heat exchanger. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-9., 2059 (020044). ISBN 978-0-7354-1787-8

F., Wasbari and R. A., Bakar and Gan, Leong Ming and A. A., Yusof (2016) Simulation of Storage Performance on Hydro-Pneumatic Driveline. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-15..

F., Wasbari and R. A., Bakar and Gan, Leong Ming and A. A., Yusof and N. M., Daud and T., Ali (2017) Comparison of hydro-pneumatic accumulator's charging performance under different thermal process for dual hybrid driveline. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-10., 257 (1). ISSN 17578981

F., Wasbari and R. A., Bakar and Gan, Leong Ming and Ahmad Anas, Yusof and Zarina, Amat Jafar (2016) Simulation of Storage Performance on Hydropneumatic Driveline in Dual Hybrid Hydraulic Passenger Car. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-13., 90 (01052). ISSN 2261-236X

F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. F., Sukri and H. N. M., Shah (2018) The effects of multiple storages on performance of hydro-pneumatic hybrid driveline. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 277-278.. ISBN 9789672145202

F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. A., Salim (2016) Feasibility Studies on Utilization of Low-Pressure in Hydro-pneumatic Driveline. Journal of Engineering and Technology (JET), 7 (2). pp. 28-42. ISSN 2180-3811. (Published)

F., Wasbari and R. A., Bakar and Gan, Leong Ming and Musthafah, M. T. and A. A., Yusof (2017) A Review of Compressed-air Hybrid Technology in Vehicle System. Renewable and Sustainable Energy Reviews, 67. pp. 935-953. ISSN 1364-0321. (Published)

F. A., Fauzi and Kurniawan, Tedi and Y. S., Bin and W. S., Wan Harun (2016) Chromium Enrichment on P11 Ferritic Steel by Pack Cementation. In: MATEC Web of Conferences: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-3., 74 (00036). ISSN 2261-236X

F. A., Fauzi and Z., Ghazalli and J. P., Siregar (2015) Effect of Various Fiber Content of Kenaf Fiber on Mechanical Properties of the Composites. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-7.. (Unpublished)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and N. S. M., Noor and Zahari, Taha and Zulkifli, Ahmad and K., Kadirgama and Nasrul Hadi, Johari and N. H., Mohamed (2017) A Finite Element Analysis of a Recurve Bow Riser using Carbon Fibre Hybrid Composites. Advanced Science Letters, 23 (11). pp. 11467-11470. ISSN 1936-6612. (Published)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Tezara, C. (2016) Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calorimetric Analysis. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-7., 78 (01042). ISSN 2261-236X

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

F. A., Zakaria and R., Daud and Mas Ayu, Hassan and Siti Haryani, Tomadi and Salwani, Mohd Salleh and Mohammed Rafiq, Abdul Kadir (2017) The Effect of Position and Different Size of Radial Hole on Performance of Cannulated Pedicle Screw. In: MATEC Web of Conferences: International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2017) , 29-31 July 2016 , Langkawi, Malaysia. pp. 1-4., 108 (13001). ISSN 2261-236X

F. M., Suhaimi and J. G., Chase and G. M., Shaw and Ummu Kulthum, Jamaludin and Normy Norfiza, A. Razak (2016) Prediction of Sepsis Progression in Critical Illness Using Artificial Neural Network. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 127-132. ISBN 978-981-10-0265-6 (print); 978-981-10-0266-3 (online)

F. R. M., Romlay (2013) Increasing performance of rotary ultrasonic motor through stator modification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

F. R. M., Romlay (2007) Integrated Of Stepper And Dc Motor Control System Using Microcontroller For Automatic Dishwasher. In: Conference on Product Design 2007 , 10-11 December 2007. , Batu Ferenggi, Penang, Malaysia,. . (Unpublished)

F. R. M., Romlay (2008) Modeling Of A Surface Contact Stress For Spur Gear Mechanism Using Static And Transient Finite Element Method. Journal of Structural Durability & Health Monitoring (SDHM), Tech Science Press, 4 (1). pp. 19-27. ISSN 1930-2983. (Published)

F. R. M., Romlay and A. K., Ariffin and Nik Abdullah, Nik Mohamed and Nor, M. J. M. (2004) Monte Carlo Method in Modeling Fatigue Crack Propagation On A Center Member Bar. In: The 5th Regional Seminar On Computational Mechanics And Numerical Analysis , 5 June 2004 , Banda Aceh, Indonesia . . (Unpublished)

F. R. M., Romlay and Asmizam, Mokhtar (2008) Machine Parameter Optimization For Wire-Electric Discharge Machining. In: International Conference on International Conference on Computational & Experimental Engineering and Sciences (ICCES 2008) , 17-21 March 2008 , Honolulu Hawaii, USA. pp. 139-144., 8 (4). ISSN 1933-2815 (online)

F. R. M., Romlay and Asmizam, Mokhtar (2008) Modeling of a Surface Contact Stress for a Gear System Using Finite Element Method. SDHM: Structural Durability & Health Monitoring, 4 (1). pp. 19-28. ISSN 1930-2983 (Print); 1930-2991 (Online). (Published)

F. R. M., Romlay and Asmizam, Mokhtar (2007) Optimization Of A Cutting Process For Wire-Electric Discharge Machining At Welding Joint. In: Conference on Product Design 2007 , 10-11 December 2007 , Batu Ferenggi, Penang, Malaysia. . (Unpublished)

F. R. M., Romlay and M. E., Wahab and M. I. A., Halim and M. H. M., Saad (2008) Failure Analyse Prediction of Bolts Component Using Probality Method. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 59-66. ISSN 1985-5176. (Published)

F. R. M., Romlay and M. S. M., Sani (2006) Model Modification Of Wira Center Member Bar. In: Regional Conference in Vehicle Engineering & Technology (Rivet 2006) , 3-5 July 2006 , Kuala Lumpur, Malaysia. . (Unpublished)

F. R. M., Romlay and Mohd Shafiq, Mat Ghazali and Luqman, Ismail (2017) Design and Fabrication of Polymer-Based Asymmetric Waveguide Coupler Utilizing Injection Moulding Process. In: Proceedings of 3rd National Conference on Knowledge Transfer , 30 November - 1 December 2016 , Penang, Malaysia. pp. 99-102.. ISBN 978-967-394-283-1

F. R. M., Romlay and Wan Azhar, Wan Yusoff (2006) Modeling Of Gear Mechanism Using Transient Finite Element Method. In: Regional Conference on Computational Mechanics & Numerical Analysis (CMNA 2006) , 12-14 May 2006 , Banda Acheh, Indonesia. . (Unpublished)

F. R. M., Romlay and Wan Azhar, Wan Yusoff and Kamal Arifin, Mat Piah (2016) Increasing the Efficiency of Traveling Wave Ultrasonic Motor by Modifying the Stator Geometry. Ultrasonics Sonochemistry, 64. pp. 177-185. ISSN 1350-4177. (Published)

F. T., Pawi and Rosdi, Daud and Kurniawan, Tedi and Siti Haryani, Tomadi and Salwani, Mohd Salleh and A., Shah (2018) Design and analysis of lightweight polyetheretherketone (PEEK) front lower control arm. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-8.. (Unpublished)

Fadhlur Rahman, Mohd Romlay (2013) Characterizing of electrical and thermal characteristic of piezoelectric ultrasonic motor for a better speed and torque performance. (Unpublished)

Fadwa Sameeha, Ismail and Kamal, Yusoh and Anis Sakinah, Zainal Abidin and Abu Hannifa, Abdullah and Zulhelmi, Ismail (2019) Three different types of tea as surfactant in liquid exfoliation of graphite : Green tea, black tea and oolong tea. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-9., 702 (1). ISSN 1757-8981

Faeeza, Abdul Halim and Firdaus, Basrawi and Ahmad Syazwan, Ramli and Oumer, A. N. and Nurul Aini, Mohd Azman (2022) Effect of surface roughness and temperature on the performance of low-temperature vacuum drying with induced nucleation boiling method in dewatering stingless bees honey. Drying Technology. pp. 1-13. ISSN 0737-3937. (In Press / Online First) (In Press / Online First)

Faeiz Azizi, Adnan and F. R. M., Romlay (2018) Contour generation algorithm for Projection Mask Stereolithography 3D printing process. In: 1st International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8..

Fahmi, Samsuri and Ezhilnavaroji, Jeroish Zachariah and Narayanamurthy, Vigneswaran and Shanmugavel, Bhuvaneshwari Kumaravel (2021) Hepatitis C virus diagnosis using microfluidics technique. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Faiq Nur, Abdul Halim (2007) The effect of water-side scale formation to heat transfer process and boiler efficiency. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faiz Asyraf, Roslan (2008) Comparison studies of machinability for aluminium, mild steel and heat treated mild steel. Faculty Mechanical Engineering, Universiti Malaysia Pahang.

Faizal Zamri, Zainal Abidin (2007) Predicting of tool wear on machining parameters using design of experiment (DOE) methodology. Faculty of Mechanical Engineering, Umversiti Malaysia Pahang.

Faizil, Wasbari and R. A., Bakar and Gan, Leong Ming and Mohd Azli, Salim and Mohamad Firdaus, Sukri and Hairol Nizam, Mohd Shah and Safarudin Gazali, Herawan (2020) The effects of multiple energy storage on the capacity and performance of hydro-pneumatic driveline. International Journal Nanoelectronics and Materials, 13 (ISSTE 2019). 233-246]. ISSN 1985-5761 (print); 2232-1535 (online). (Published)

Fakharuddin, Azhar and Nik Mohd Kamil, Nik Yusof and Muhammad, Rauf and Abdalla, Ahmed N. (2009) New Energy Management System Based on Intelligent Digital Power Monitoring. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1-5.. (Unpublished)

Fakhrurrazi, Ab Karim (2013) Experimental and finite element evaluation of bending for galvanized iron. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fakir, Md Moslemuddin and M. M., Rahman and R. A., Bakar and S., Basri (2010) One-Dimensional Heat Transfer in a Convection-Tip Rectangular Thin Fin: A Comparative Study. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. pp. 12-22.. ISBN 978-967-0120-04-1

Fakir, Md Moslemuddin and S., Basri and I. B. M., Sahat and Sharma, K. V. and Sabira, Khatun (2011) OFEM: An optimum finite element algorithm for heat transfer problem in twodimensional insulated-tip rectangular fin. In: 3rd International Conference on Computational Intelligence, Communication Systems and Networks , 26-28 July 2011 , Bali, Indonesia. pp. 173-177.. ISBN 978-1-4577-0975-3

Fakir, Md Moslemuddin and S., Basri and M. M., Rahman and R. A., Bakar (2012) Efficient finite element and differential quadrature methods for heat distribution in one-dimensional insulated-tip rectangular fin. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X

Fara Farhana, Abdul Basek (2010) Design and development of orange peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farah Alia, Fauzi (2018) Pack cementation of high chromium steel for high temperature application in steam condition. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Ameelia, Mohammad and Siti Zubaidah, Ismail (2021) Product-Service System (PSS) for inventory control: Analysis using Delmia QUEST simulation modelling based on the production line. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 527-536.. ISBN 978-981-15-9505-9

Farah Ayuni, Fauzi (2018) Development of hybrid natural/synthetic fiber reinforced polymer composite of recurve bow riser for Malaysian junior athletes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Ayuni, Fauzi and Z., Ghazalli and Siregar, J. P. (2016) Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calometric Analysis. In: The International Conference on Green Design and Manufacture 2016 , 1-2 May 2016 , Phuket, Thailand. pp. 1-6.. (Unpublished)

Farah Ayuni, Fauzi and Zahari, Taha and Zakri, Ghazalli and Siregar, J. P. and Zulkifli, Ahmad@Manap and K., Kadirgama and Nasrul Hadi, Johari and Danial, Mohamed (2017) Analysis of an Olympic Scale of a Recurve Bow Riser on the Basis of Malaysian Under 15 and Under 17 Archers. In: Advances in Human Factors in Sports and Outdoor Recreation. Advances in Intelligent Systems and Computing, 496 . Springer International Publishing, Switzerland, pp. 131-140. ISBN 978-3-319-41952-7

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and W. S., Wan Harun and M. M., Yusoff (2019) Highly porous of hydroxyethyl cellulose biocomposite scaffolds for tissue engineering. International Journal of Biological Macromolecules, 122. pp. 562-571. ISSN 0141-8130. (Published)

Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Anith Khairunnisa, Ghazali and Zuwairie, Ibrahim (2022) Indoor comfort and energy consumption optimization using an inertia weight artificial bee colony algorithm. Algorithms, 15 (395). pp. 1-21. ISSN 1999-4893. (Published)

Farhan Anis, Azhar and Mahfuzah, Mustafa and Norizam, Sulaiman and Rashid, Mamunur and Bari, Bifta Sama and Islam, Md Nahidul and Hasan, Md Jahid and Nur Fahriza, Mohd Ali (2022) The Classification of Electrooculogram (EOG) through the application of Linear Discriminant Analysis (LDA) of selected time-domain signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 583-591., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Anwar P. P., Abdul Majeed (2020) The diagnosis of diabetic retinopathy by means of transfer learning with conventional machine learning pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 62-67. ISSN 2637-0883. (Published)

Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab Nasir and Abdul Majeed, Anwar P. P. (2022) The diagnosis of diabetic retinopathy : An evaluation of different classifiers with the inception V3 model as a feature extractor. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 392-397., 429 LNNS (276219). ISSN 2367-3370 ISBN 978-303097671-2

Farhana, K. and K., Kadirgama and M. M., Noor (2021) Analysis of non-dimensional numbers of fluid flowing inside tubes of flat plate solar collector. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 121-131.. ISBN 978-981-15-7309-5

Farhana, K. and K., Kadirgama and M. M., Noor and M. M., Rahman and D., Ramasamy and Mahamude, A. S. F. (2019) CFD modelling of different properties of nanofluids in header and riser tube of flat plate solar collector. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012041). ISSN 1757-899X

Farhana, K. and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor and G., Najafi and M., Samykano and A. S. F., Mahamude (2019) Improvement in the performance of solar collectors with nanofluids - A state-of-the-art review. Nano-Structures & Nano-Objects, 18. pp. 1-21. ISSN 2352-507X. (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy and M., Samykano and G., Najafi and Nor Azwadi, Che Sidik and F., Tarlochan (2019) Significance of alumina in nanofluid technology. Journal of Thermal Analysis and Calorimetry. pp. 1-20. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Farhana, K. and K., Kadirgama and S., Subramonian and D., Ramasamy and M., Samykano and Mahamude, A. S. F. (2023) Applications of graphene nanomaterials in energy storage—A state-of-art short review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 595 -609.. ISSN 2195-4356 ISBN 978-981191456-0

Farhana, K. and Mahamude, A. S. F. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy (2019) Internal energy analysis with nanofluids in header and riser tube of flat plate solar collector by CFD modelling. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012069). ISSN 1757-899X

Farhana, Kaniz (2019) Design and development of highly efficient nano fluidic flat plate solar collector. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kadirgama, Kumaran).

Farhana, Kaniz and K., Kadirgama and Mohamed, Danial and Mahamude, Abu Shadate Faisal and Subramonian, Sivarao and D., Ramasamy and Mahendran, Samykano (2023) An experimental evaluation of specific heat of mono and hybrid nanofluids. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 215-223.. ISSN 2195-4356 ISBN 978-981191456-0

Farhana, Kaniz and Kadirgama, Kumaran and Faisal Mahamude, Abu Shadate and Jose, Rajan (2024) Review of MXenes as a component in smart textiles and an adsorbent for textile wastewater remediation. Chinese Chemical Letters, 35 (108533). pp. 1-15. ISSN 1001-8417 (print); 1878-5964 (online). (Published)

Farhana, Kaniz and Mahamude, Abu Shadate Faisal and Kadirgama, Kumaran and Rajan, Jose (2024) Noble MXene nanofluids' impact on solar collector effectiveness enhancement: a CFD numerical evaluation. Sustainable Energy Research, 11 (1). ISSN 2731-9237. (Published)

Faris, Suffian (2009) Experimental study of the heat affected zone (HAZ) and surface roughness on laser beam cutting (LBC) on acrylic sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farzad, Jaliliantabar and Abdul Adam, Abdullah and Carlucci, Paolo and Kumarasamy, Sudhakar (2022) Biofuel combustion generated particles analysis. In: Application of Clean Fuels in Combustion Engines. Energy, Environment, and Sustainability . Springer, Singapore, pp. 117-129. ISBN 978-981-16-8751-8

Fatanah, M. Suhaimi and Chase, J. Geoffrey and Pretty, Christopher G. and Shaw, Geoffrey M. and Normy Norfiza, A. Razak and Ummu Kulthum, Jamaludin (2017) Insulin Sensitivity and Sepsis Score: A Correlation between Model-based Metric and Sepsis Scoring System in Critically Ill Patients. Biomedical Signal Processing and Control, 32. pp. 112-123. ISSN 1746-8094. (Published)

Fatanah, M. Suhaimi and Chase, J. Geoffrey and Pretty, G. Christopher and Shaw, M. Geoffrey and Normy Norfiza, A. Razak and Ummu Kulthum, Jamaludin (2015) Insulin Sensitivity as a Model-Based Marker for Sepsis Diagnosis. IFAC-PapersOnLine, 48 (20). pp. 372-376. ISSN 2405-8963. (Published)

Fatchurrohman, Nanang and Ismed, Iskandar and Suraya, Sulaiman and Kartina, Johan (2014) Sustainable Analysis in the Product Development of Al-Metal Matrix Composites Automotive Component. Applied Mechanics and Materials, 695. pp. 32-35. ISSN 1662-7482. (Published)

Fatchurrohman, Nanang and Nurul Najihah Najlaa, Noor Hamdan and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah (2020) Investigation on the effect of build orientation and heat treatment on tensile strength and fracture mechanism of FDM 3D printed PLA. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 461-465.. ISBN 978-981-15-0950-6

Fathul Naim, Abdul Jamil (2008) Relationship between failure mechanisms with PCBN tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fatimah, Dzaharudin (2014) Numerical study of the dynamics of microbubble clusters in ultrasonic fields. PhD thesis, The University of Melbourne (Contributors, UNSPECIFIED: UNSPECIFIED).

Fatimah, Dzaharudin and Azrina, Md Ralib and Ummu Kulthum, Jamaludin and Mohd Basri, Mat Nor and Afidalina, Tumian and Har, Lim Chiew and Ceng, T. C. (2020) Mortality prediction in critically ill patients using machine learning score. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-12., 788 (012029). ISSN 1757-8981

Fatimah, Dzaharudin and Ooi, A. and Manasseh, R. (2017) Effects of Boundary Proximity on Monodispersed Microbubbles in Ultrasonic Fields. Journal of Sound and Vibration, 410 (8). pp. 330-342. ISSN 0022-460X. (Published)

Fatimah, Dzaharudin and Suslov, Sergey A. and Manasseh, Richard and Ooi, Andrew (2013) Effects of Coupling, Bubble Size, and Spatial Arrangement on Chaotic Dynamics of Microbubble Cluster in Ultrasonic Fields. The Journal of Acoustical Society of America, 134 (5). pp. 3425-3434. ISSN 0001-4966. (Published)

Fatimah, Dzaharudin and Ummu Kulthum, Jamaludin and Mohd Nazri, Kasuan (2016) Numerical Study on the Effects of a Boundary on the Chaotic Behavior of a Small Cluster of Microbubbles in an Ultrasonic Field. In: 4th International Conference on Mathematical Sciences , 15-17 November 2016 , Putrajaya, Malaysia. . (Unpublished)

Fatin Hakimah, Sharifuddin and Kassa, Freselam Mulubrhan and Gebremariam, M. A. and Azmir, Azhari and Alemu, Tamiru (2019) Process simulation modelling and improvement on energy consumptions efficiency. In: 2019 IEEE 7th Conference on Systems, Process and Control (ICSPC) , 13 - 14 December 2019 , Melaka. pp. 76-79. (9067991). ISBN 978-172811826-0

Fatin Nabilah, Giman and Ping, Jack Soh and Mohd Faizal, Jamlos and H., Lago and Azremi Abdullah, Al-Hadi and Mohamedfareq, Abdulmalek and Nidhal, Abdulaziz (2017) Conformal Dual-band Textile Antenna with Metasurface for WBAN Application. Applied Physics A, 123 (32). pp. 1-7. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Fatin Roziana, Misran (2009) Development of high performance low-pass filter for anti-sway control of a gantry crane system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Fatin Zafirah, Mansur and Che Ku Mohammad Faizal, Che Ku Yahya and Noor Asma Fazli, Abdul Samad and Atnaw, Samson Mekbib and Shaharin, Sulaiman (2019) Experimental studies on gasification performance of sawdust and sawdust pellet in a downdraft biomass gasifier. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 5 (2). pp. 22-28. ISSN 0126-8139. (Published)

Faturachman, Danny and Shariman, Mustafa and Octaviany, Fanny and Novita, Theresia D. (2013) Failure Mode and Effects Analysis of Diesel Engine for Ship Navigation System Improvement. In: The International Conference on Business Innovation, Entrepreneurship and Engineering 2013 (ICOBIEE 2013) , 6-8 December 2013 , Penang. pp. 1-13.. (Unpublished)

Fauziah, Zainuddin and Awanis, Romli and Roslina, Mohd Sidek (2007) Sistem Penjejakan Pemasangan Kenderaan Atas Talian Dengan Pendekatan Tepat Pada Masa (Just In Time). In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

Faysal, Atik and Ngui, Wai Keng and Lim, M. H. (2021) Performance evaluation of BPSO & PCA as feature reduction techniques for bearing fault diagnosis. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer Nature Singapore, Singapore, pp. 605-615. ISBN 978-981-33-4596-6 (Print) 978-981-33-4596-6 (Online)

Faysal, Atik and Ngui, Wai Keng and Lim, Meng Hee and Leong, Mohd Salman (2021) Noise Eliminated Ensemble Empirical Mode Decomposition Scalogram Analysis for Rotating Machinery Fault Diagnosis. Sensors, 21 (23). pp. 1-29. ISSN 1424-8220. (Published)

Faysal, Atik and Ngui, Wai Keng and M. H., Lim (2022) Performance Evaluation of BPSO & PCA as Feature Reduction Techniques for Bearing Fault Diagnosis. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 605-615., 730.

Fazal, M.A. and Sundus, F. and Masjuki, H.H. and Rubaiee, S. and Quazi, M.M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. pp. 1439-1447. ISSN 2213-1388. (Published)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) Investigation on musculoskeletal discomfort and ergonomics risk factors among production team members at an automotive component assembly plant. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-11., 257 (1). ISSN 17578981

Fazilah, Abdul Aziz and Zakri, Ghazalli and Mohd Jawad, Mohd Jamil and Awanis, Romli and N. M. Zuki, N. M. (2018) A knowledge-based ergonomics assessment system for WMSD prevention using AHP methodology. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 161-173. ISBN 9789811087875

Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. (2016) Alternative structure of new knowledge-based ergonomics risk assessment system. In: The 4th SEANES International Conference on Human Factors and Ergonomics in South East Asia , 28 November 2016 - 1 Disember 2016 , Bandung, Indonesia. pp. 1-11.. (Unpublished)

Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) A Future Framework of Knowledge-Based Ergonomics Assessment System at Workplace in Automotive Assembly Plant. In: Advances in Social & Occupational Ergonomics. Advances in Intelligent Systems and Computing, 487 (Pt. II). Springer International Publishing, Switzerland, pp. 93-105. ISBN 978-3-319-41687-8 (Print); 978-3-319-41688-5 (Online)

Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. and Amri, Isfar and N. S. M., Shalahim (2017) G3-4 musculoskeletal discomforts among assembly team members performing assembly welding task. The Japanese Journal of Ergonomics, 53 (Supplement2). pp. 466-469. ISSN 1884-2844. (Published)

Fazliana, Fauzun (2015) Experimental and statistical analysis for surface modification of steel and cast iron using Nd:yag laser. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fazliana, Fauzun (2021) Laser cladding of tool steel for grain boundary stability. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Fazliana, Fauzun and S. N., Aqida and I., Ismail and Norhafzan, Bariman (2017) Micro-Bulges Investigation on Laser Modified Tool Steel Surface. MATEC Web of Conferences, 95. pp. 1-4. ISSN 2261-236X. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2020) Effect of tungsten carbide partial dissolution on the microstructure evolution of a laser clad surface. Optics & Laser Technology, 121 (105789). pp. 1-8. ISSN 0030-3992. (Published)

Fazliana, Fauzun and S. N., Aqida and Md Saidin, Wahab (2014) Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties. Advanced Materials Research, 1024. pp. 215-218. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Fazliana, Fauzun and S. N., Aqida and Naher, S. and Brabazon, D. and Calosso, Francesco and Rosso, M. (2014) Effects of Thermal Fatigue on Laser Modified H13 Die Steel. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 975-980. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Fazlina, Mansor (2010) Designing and evaluating of jig for holding cylindrical parts for mass production for drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Felayati, Frengki Mohamad and Semin, . and Cahyono, Beny and R. A., Bakar (2019) Numerical study of dual fuel engine using proportional natural gas split injection. In: AIP Conference Proceedings: Proceedings of the 4th International Conference on Mechanical Engineering (ICOME2019) , 28-29 August 2019 , Yogyakarta, Indonesia. pp. 1-5., 2187 (020018). ISSN 0094-243X ISBN 978-0-7354-1934-6

Felayati, Frengki Mohamad and Semin, . and Cahyono, Beny and Rosli, Abu Bakar and Birouk, Madjid (2021) Performance and emissions of natural gas/diesel dual-fuel engine at low load conditions: Effect of natural gas split injection strategy. Fuel Processing Technology, 300 (121012). pp. 1-12. ISSN 0378-3820. (Published)

Ferdous, I. U. and Alang, Nasrul Azuan and Alias, J. (2022) Prediction of the creep behavior of P91 Steel at 873 K using continuum damage mechanics model. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 359-371. ISBN 978-981-19-2890-1

Ferdous, I. U. and Nasrul Azuan, Alang and Juliawati, Alias and S., Mohd Nadzir (2021) Numerical prediction of creep rupture life of ex-service and as-received grade 91 steel at 873 K. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8845 -8858. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Fernando, Yudi and Rubakanthan, Saravannan (2021) Blockchain technology: Energy efficiency and ethical compliance. Journal of Governance & Integrity, 4 (2). pp. 88-95. ISSN 2600-7479. (Published)

Fernini, B. and Temmar, M. and M. M., Noor (2018) Toward a dynamic analysis of bipedal robots inspired by human leg muscles. Journal of Mechanical Engineering and Sciences (JMES), 12 (2). pp. 3593-3604. ISSN 2231-8380 (online). (Published)

Fernini, Brahim and Temmar, Mustapha and Kai, Yoshihiro and M. M., Noor (2018) Verification of the Dynamic Modeling of 2-R Robot Actuated by (N) Equally Spaced Planet-Gears by Using SolidWorks and MATLAB/SIMULINK. Mechanics and Mechanical Engineering, 22 (4). pp. 1497-1510. ISSN 1428-1511. (Published)

Firdaus, Basrawi and Al-Anati, A. I. M. and Ibrahim, Thamir K. and Mohd Hazwan, Yusof and A. A., Razak and Shaharin Anwar, Sulaiman and Yamada, Takanobu (2018) Theoretical analysis on the micro gas turbine integrated solar farm for power output stabilization. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. 1 -6., 225 (04012). ISSN 2261-236X

Firdaus, Basrawi and Chandran, Puganesa (2021) PV cools: Close loop water cooling system for PV module. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Firdaus, Basrawi and Leon, Y. C. and Ibrahim, Thamir K. and Mohd Hazwan, Yusof and A. A., Razak and Shaharin Anwar, Sulaiman and Yamada, Takanobu (2018) Experimental analysis on the effect of area of surface cooling for a water-cooled photovoltaic. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. 1 -6., 225 (01011). ISSN 2261-236X

Firdaus, Muhamad (2012) Development of solar oven incorporating thermal energy storage application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Firdaus Haikal, Ramli (2012) Design of single cylinder variable compression ratio 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Firdaus Shazriq, Mohd Fadzil and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli (2018) Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process. Journal of Modern Manufacturing Systems and Technology, 1. pp. 76-81. ISSN 2636-9575. (Published)

Fitriady, Muhammad Arifuddin and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2022) Effect of mesh refinement on vertical and lateral velocity profiles of the wake flow behind a spire based on cfd. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 160..

Fitriyana, Deni Fajar and Anis, Samsudin and Al Qudus, Abdul Rachman and Lakuy, Mirza Aufa Nugraha and Ismail, Rifky and Nugroho, Sri and Haryadi, Gunawan Dwi and Bayuseno, Athanasius Priharyoto and Siregar, Januar Parlaungan (2022) The effect of post-heat treatment on the mechanical properties of FeCrBMnSi coatings prepared by twin wire arc spraying (TWAS) method on pump impeller from 304 stainless steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 138-147. ISSN 2289-7879. (Published)

Fitriyana, Deni Fajar and Doni Widodo, Rahmat and Kriswanto, Kriswanto and Athoillah, Ahmad and Prasetyo, Ares Yudi and Alrasyid, Mochamad Dzaki and Aripin, Muhammad Bustanul and Dimyati, Saeful and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Ismail, Rifky and Bayuseno, Athanasius Priharyoto (2022) Addition Rice Husk on the Density and Impact Strength of Non-Asbestos Brake Pad Composites Prepared by The Hand Layup Method. Jurnal Penerapan Teknologi dan Pembelajaran, 20 (1). pp. 20-28. ISSN 2527-6964. (Published)

Fong, Jin Hiung and M. S., Idris (2020) Development of wrist monitoring device to measure wrist range of motion. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012033). ISSN 1757-8981 (Print), 1757-899X (Online)

Foo, K. and Liang, Y. Y. and Tan, C. K. and Weihs, G. A. Fimbres (2021) Coupled effects of circular and elliptical feed spacers under forced-slip on viscous dissipation and mass transfer enhancement based on CFD. Journal of Membrane Science, 637 (119599). pp. 1-13. ISSN 0376-7388. (Published)

Fradinata, E. and Suthummanon, S. and Suntiamorntut, W. and M. M., Noor (2019) Compare the forecasting method of artificial neural network and support vector regression model to measure the bullwhip effect in supply chain. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4816-4834. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Francis, Angel and Ramyashree, M. S. and Shanmuga Priya, S. and Kumar, Surendra Harish and Sudhakar, Kumarasamy and Fan, Wei Keen and Tahir, Muhammad (2022) Carbon dioxide hydrogenation to methanol : Process simulation and optimization studies. International Journal of Hydrogen Energy, 47 (86). pp. 36418-36432. ISSN 0360-3199. (Published)

Fukuoka, Yasuhiro and Komatsu, Ryunosuke and Machii, Kenta and Yokota, Masaaki and Tobe, Masaki and Ahmad Najmuddin, Ibrahim and Fukui, Takahiro and Habu, Yasushi (2022) Pace running of a quadruped robot driven by pneumatic muscle actuators : An experimental study. Applied Sciences (Switzerland), 12 (9). pp. 1-17. ISSN 2076-3417. (Published)

Fukuoka, Yasuhiro and Oshino, Kazuyuki and Ahmad Najmuddin, Ibrahim (2022) Negotiating uneven terrain by a simple teleoperated tracked vehicle with internally movable center of gravity. Applied Sciences (Switzerland), 12 (1). pp. 1-16. ISSN 2076-3417. (Published)

G

G., Kadirgama and A., Kumar and M., Sandhya and L., Samylingam and D., Ramasamy and K., Kadirgama and H. A., Mohammed and M., Samykano and R., Saidur (2022) Graphene nanoplatelets–cellulose nanocrystals in engine oil for automotive applications. Green Materials, Ahead of Print. pp. 1-9. ISSN 2049-1239. (Published)

G., Kadirgama and Mohd Kamal, Kamarulzaman and D., Ramasamy and Kadirgama, Kumaran and Sakinah, Hisham (2023) Classification of lubricants base oils for nanolubricants applications—A review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 205-213.. ISSN 2195-4356 ISBN 978-981191456-0

G., Najafi and B., Ghobadian and Talal, Yusaf and Seyed Mohammad, Safieddin Ardebili and R., Mamat (2015) Optimization of Performance and Exhaust Emission Parameters of a SI (Spark Ignition) Engine with Gasoline–ethanol Blended Fuels using Response Surface Methodology. Energy, 90 (Prt 2.). pp. 1815-1829. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

G., Sashwin Nair and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan (2021) Flow and heat transfer simulation analysis of 3D compact heat exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (3). pp. 71-87. ISSN 2289-7879. (Published)

G. M., Salim and Mohd Anwar, Zawawi (2020) Knee monitoring device based on optical sensor embedded in mechanical compartment assembly. Optik, 223 (165546). pp. 1-16. ISSN 0030-4026. (Published)

G. Q., Huang and J., Wu and W. T., Hou and L. H., Shah and A. R. H., Midawi and A. P., Gerlich and Y. F., Shen and F. Q., Meng (2021) Microstructural evolution and mechanical behavior of powder metallurgy based SiC/Al–Mg-Sc-Zr nanocomposite subjected to multi-pass friction stir processing. Materials Science and Engineering: A, 806 (140831). pp. 1-14. ISSN 0921-5093. (Published)

Gan, Hui Leng and Law, Hoon Chit and R. A., Bakar (2014) Development of a Newly Designed Combined Grinding Equipment. In: 5th International Conference on Energy and Sustainability , 16-18 December 2014 , Putrajaya. .

Gan, Leong Ming (2010) Conceptual Design Of Photothermal Electrochemical Water Resonant Electrolysis. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system /. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Leong Ming and R. A., Bakar (2010) Development Of Multi Duty Cycle Sequential Gated Pulse Frequency Generator For Resonant Electrolysis. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Leong Ming and Gan, Hui Leng and Law, Hoon Chit (2015) Analysis on the Grinding Quality of Palm Oil Fibers By Using A Combined Grinding Equipment. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012047).

Gan, Leong Ming and Law, Hoon Chit and R. A., Bakar (2015) Development of a Briquetting Facility with the Integration of a Hydraulic System for Biomass Densification. Energy and Sustainability V: Special Contributions, 206. pp. 335-345. ISSN 1743-3541. (Published)

Gan, Sin Yi (2008) Mathematical modeling to predict surface roughness in milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ganesan, Kadirgama (2018) Thermophysical evaluation of nanocellulose as a new coolant for radiator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gani, Asri and Erdiwansyah, E. and Desvita, Hera and Munawar, Edi and Rizalman, Mamat and Nizar, Muhammad Afdi and Darnas, Yeggi and Sardjono, Ratnaningsih Eko (2024) Comparative analysis of HHV and LHV values of biocoke fuel from palm oil mill solid waste. Case Studies in Chemical and Environmental Engineering, 9 (100581). pp. 1-7. ISSN 2666-0164. (Published)

Gani, Asri and Erdiwansyah, E. and Munawar, Edi and Mahidin, M. and Rizalman, Mamat and S. M., Rosdi (2023) Investigation of the potential biomass waste source for biocoke production in Indonesia : A review. Energy Reports, 10. pp. 2417-2438. ISSN 2352-4847. (Published)

Gani, Asri and Erdiwansyah, Erdiwansyah and Sardjono, Ratnaningsih Eko and Mariana, Mariana and Rizalman, Mamat (2022) Comparison of remaining coal-burning ash-based on cd, pb, and hg concentration at different temperatures : A case study in aceh province. Journal of Environmental Engineering and Landscape Management, 30 (3). pp. 342-349. ISSN 1648-6897. (Published)

Gapar, Francis Giang (2011) Design and develop robotic arm for automated guided conveyor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Mohd Azmir, Mohd Azhari and Zamzuri, Hamedon and Ahmad Razlan, Yusoff and Muhammed Nafis, Osman Zahid (2020) Analysis and prediction of the cutting forces of three dimensional end milling using finite elements modelling. , [Research Book Profile: Research Report] (Unpublished)

Ghanbari, M. and Najafi, G. and Ghobadian, B. and R., Mamat and M. M., Noor and A., Moosavian (2015) Support Vector Machine to predict diesel engine performance and emission parameters fueled with nano-particles additive to diesel fuel. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012069). ISSN 17578981

Gharehghani, A. and Koochak, M. and Mirsalim, M. and Yusaf, Talal (2013) Experimental Investigation of Thermal Balance of a Turbocharged SI engine Operating on Natural Gas. Applied Thermal Engineering, 60 (1-2). pp. 200-207. ISSN 1359-4311. (Published)

Ghassan Maan, Salim and Mohd Anwar, Zawawi (2021) Optical goniometer for knee joint angle continuous monitoring. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Ghazali, K. H. and Razali, Saifudin and Mohd Salmizan, Mohd Zain (2006) Automatic control and supervision using PC based monitoring and control system (PCMOC system) for 5 stations production line. , [Research Report: Research Report] (Unpublished)

Ghazali, M. F. and Nizwan, Che Ku Eddy and Ismail, Nurazima and Sani, M. S.M. and Yusof, Mohd Fadhlan M. and Mohamed, Zamri (2019) Hydraulic characterization of PVC-O pipes by means of transient tests. , [Research Report: Research Report] (Unpublished)

Ghazali, M. F. and Sani, M. S.M. and Hafizi, Z. M. and Ngui, W. K. and Priyandoko, Gigih (2017) Development of bearing fault detection system based on vibration signal. , [Research Report: Research Report] (Unpublished)

Ghazali, M. F. and Yusof, Mohd Fadhlan M. and Baharom, Mohamad Zairi and Nizwan, Che Ku Eddy and Abdullah, Arman and Priyandoko, Gigih (2013) A new technique of leak detection in a gas pipeline network based on time reversal method and non linear acoustic. , [Research Report: Research Report] (Unpublished)

Ghazali, M. S. M. and Romlay, F. R. M. and Ehsan, A. A. (2022) Development of polymer-based Y-branch symmetric waveguide coupler using soft lithography technique. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 71 -76., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Ghiasi, Pedram and Najafi, Gholamhassan and Ghobadian, Barat and Jafari, Ali and Rizalman, Mamat and Mohd Fairusham, Ghazali (2023) CFD-study of the H-Rotor Darrius wind turbine performance in drag-lift and lift regime : Impact of type, thickness and chord length of blades. Alexandria Engineering Journal, 67. pp. 51-64. ISSN 1110-0168. (Published)

Ghiasi, Pedram and Salehi, Amar and Hoseini, S. S. and Najafi, G. and R., Mamat and Balkhaya, . and Fitri, Khoerunnisa (2020) Investigation of the effect of flow rate on fluid heat transfer in counter-flow helical heat exchanger using CFD method. CFD Letters, 12 (3). pp. 98-111. ISSN 2180-1363. (Published)

Goel, Varun and Dwivedi, Ankur and Kumar, Rajat and Kumar, Reji Rajamony and Pandey, Adarsh Kumar and Chopra, Kapil and Tyagi, Vineet Veer (2023) PCM-assisted energy storage systems for solar-thermal applications: Review of the associated problems and their mitigation strategies. Journal of Energy Storage, 69 (107912). pp. 1-30. ISSN 2352-152X. (Published)

Goh, Ming Hui (2013) Dynamics analysis of 3 axis gantry type multipurpose CNC machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Goh, Ming Qian and Mohd Riduwan, Ghazali and Mohd Ashraf, Ahmad and Muhamad Shahir, Mohd Shukri (2023) Data Driven Sigmoid Proportional-Integral-Derivative (SPID) Controller for Twin Rotor MIMO System. Journal Européen des Systèmes Automatisés, 56 (1). pp. 105-113. ISSN 1269-6935 (print); 2116-7087 (online). (Published)

Gopalakrishnan, Siva and Ummu Kulthum, Jamaludin (2017) Investigation on different types of blood glucose control system. Journal of Mechanical Engineering, SI(4) (2). pp. 135-152. ISSN 1823- 5514 (Print); 2550-164X (Online). (Published)

Gopi, Ajith and Sharma, Prabhakar and Sudhakar, Kumarasamy and Ngui, Wai Keng and Kirpichnikova, Irina and Cuce, Erdem (2023) Weather impact on solar farm Performance : A comparative analysis of machine learning techniques. Sustainability (Switzerland), 15 (439). pp. 1-28. ISSN 2071-1050. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Kirpichnikova, I. M. and Cuce, Erdem (2021) Energy analysis of utility-scale PV plant in the rain-dominated tropical monsoon climates. Case Studies in Thermal Engineering, 26 (101123). pp. 1-11. ISSN 2214-157X. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. and Priya, S. Shanmuga (2021) Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region. International Journal of Photoenergy, 2021 (5551014). pp. 1-10. ISSN 1687-529X (Online). (Published)

Gow, Moh Kee (2007) Autonomous robot. Faculty Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Goyal, Ashish and Rahman, Huzef U. R. and Che Ghani, S. A. (2021) Experimental investigation & optimisation of wire electrical discharge machining process parameters for Ni49Ti51 shape memory alloy. Journal of King Saud University - Engineering Sciences, 33 (2). pp. 129-135. ISSN 1018-3639. (Published)

Gu, Hongyan and Liang, Huimin and Tong, Guoyun and Liu, Fang and Liu, Yu and Liu, Xing and Jia, Zhen and Paul, John (2021) Research on vibration mechanism and control technology of building structure under earthquake action. Journal of Vibroengineering, 23 (6). pp. 1395-1406. ISSN 1392-8716. (Published)

Guna Rao, Kishyen Raao and Nur Qurratul Ain, Adanan and Anis Izzati, Md Yusoff and Faiz, Mohd Turan and Norazlianie, Sazali (2024) Optimisation of Injection Moulding Process Parameters. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 182-198. ISSN 2289-7895. (Published)

Gunalan, Sanasie and Zul Izwan, Abdul Radzak and Muhammad Aizzat, Zakaria (2021) Preventive maintenance data logger monitoring system. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 68-78. ISSN 2637-0883. (Published)

Gundabattini, Edison and Kuppan, Ravi and Solomon, Darius Gnanaraj and Kalam, Akhtar and Kothari, D. P. and R. A., Bakar (2021) A review on methods of finding losses and cooling methods to increase efficiency of electric machines. Ain Shams Engineering Journal, 12 (1). pp. 497-505. ISSN 2090-4479. (Published)

Guni, Geogia and Addie Irawan, Hashim (2016) Identification and Characteristics of Parallel Actuation Robot’s Leg Configuration Using Hammerstein-Wiener Approach. Journal of Electrical, Electronics, Control and Instrumentations Engineering (JEECIE), 1 (10). pp. 48-62. ISSN 2462-2303. (Published)

H

H., Hanafi and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Numerical Modeling on Homogeneous Charge Compression Ignition Combustion Engine Fueled by Diesel-Ethanol Blends. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9., 74 (00037). ISSN 2261-236X

H., Hanafi and M. M., Noor and M. M., Rahman and K., Kadirgama and D., Ramasamy and C. K., Ihsan and M. K., Kamarulzaman and Y., Selvaraj (2016) Numerical Study of N-Heptane Fuelled Hcci Under Different Air Fuel Ratio and Inlet Air Temperature. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV) 2016 , 1-4 August 2016 , MAI, Cyberjaya. . (Unpublished)

H., Ismail and M. Z., Sulaiman and M. A. H., Aizzat (2020) Qualitative investigations on the stability of Al2O3-SiO2 hybrid water-based nanofluids. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-8., 788 (012091). ISSN 1757-8981

H., Ismail and Muhamad Zuhairi, Sulaiman and M. A. H., Aizzat (2020) Qualitative investigations on the stability of Al2 O3 -SiO2 hybrid waterbased nanofluids. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-7., 788 (012091). ISSN 1757-899X

H., Lago and Mohd Faizal, Jamlos and Ping, Jack Soh and M. H., Muslim and Vandenbosch, Guy A. E. and Narbudowicz, Adam (2017) Bandwidth Enhancement of an Array Antenna using Slotted Artificial Magnetic Conductors. Applied Physics A, 123 (53). pp. 1-5. ISSN 0947-8396(Print); 1432-0630 (Online). (Published)

H., Lago and Z., Zakaria and M. F., Jamlos and P. J., Soh (2019) A wideband reconfigurable folded planar dipole using MEMS and hybrid polymeric substrates. AEU - International Journal of Electronics and Communication, 99. pp. 347-353. ISSN 1434-8411. (Published)

H., Tarizan and M., Ishak and Quazi, M. M. and Qaban, A. (2019) Friction stir welding of AZ31B magnesium alloy with ER4043 aluminium alloy filler. In: Proceedings of ARSSS International Conference , 18th November, 2019 , Oxford, United Kingdom. pp. 1-3..

H. A., Haziq A. and M. R. M., Akramin and M. N. M., Husnain and M. S., Shaari (2020) Modelling of crack propagation for embedded crack structure. In: Proceedings of International Conference of Aerospace and Mechanical Engineering 2019 , 20-21 November 2019 , Universiti Sains Malaysia, Malaysia. pp. 11-19.. ISBN 978-981-15-4756-0

H. A., Salaam and M. S., H. Jaman and Ramli, Junid (2019) Sustainability performance model: a case study of pneumatic nipple hose connector. In: International Conference on Mechanical Engineering Research (ICMER) 2019 , 30 - 31 Julai 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8.. (Unpublished)

H. A., Salaam and Zahari, Taha and Tuan Mohammad Yusoff, Tuan Ya (2012) Minimum Quantity Lubrication (MQL) using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining. Applied Mechanics and Materials, 217-219. pp. 2012-2015. ISSN 1662-7482. (Published)

H. M., Asnida and Sakinah, Muhamad Hisham and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Copper (II) Oxide Nanoparticle As Friction Reduction and Anti-Wear Additive In Lubricating Oil. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

H. M., Luqman and W. Zuhriraihan, W. M. Zulkifly and C. Zafirah, Rosly and Khalijah, Khalid and Ummu Kulthum, Jamaludin and Azrina, Md. Ralib and Mohd Basri, Mat Nor (2017) Performance of blood glucose management protocols in HTAA intensive care unit. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2016) , 22 October 2016 , UniversIti Teknologi Mara Shah Alam, Malaysia. pp. 156-161.. ISBN 978-1-5090-4186-2

H. M., Mahmudul and Hagos, F. Y. and M. Mukhtar, N. A. and R., Mamat and Abdul Adam, Abdullah (2018) Effect of alcohol on diesel engine combustion operating with biodiesel-diesel blend at idling conditions. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-10., 318 (1). ISSN 17578981 (print);1757-899X (online)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah (2016) Impact of Oxygenated Additives to Diesel-Biodiesel Blends in the Context of Performance and Emissions Characteristics of a CI Engine. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Awad, Omar I. (2016) Experimental Investigation of the Impact of Using Alcohol-Biodiesel-Diesel Blending Fuel on Combustion of Single Cylinder CI Engine. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 160 (012038). ISSN 1757-8981 (Print), 1757-899X (Online)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Wan Faizal, Wan Ishak and Alenezi, R. (2017) Production, Characterization and Performance of Biodiesel as an Alternative Fuel in Diesel Engines – A Review. Renewable and Sustainable Energy Reviews, 72. pp. 497-509. ISSN 1364-0321. (Published)

H. N., Yakin and Nik Abdullah, Nik Mohamed and M. R. M., Rejab (2023) Effect of particle discretisation and horizon size on the displacement and damage plot using bond-based peridynamics. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 881 -897.. ISSN 2195-4356 ISBN 978-981191456-0

Hadi, A. E. and Tezara, C. and Fitriyana, D. F. and Siregar, J. P. and Oumer, A. N. and Hamdan, M. H. M. and Jaafar, J. and Zalinawati, M. and Irawan, A. P. (2021) Effect of water absorption behaviour on tensile properties of hybrid jute-roselle woven fibre reinforced polyester composites. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9170-9178. ISSN 2180-1606. (Published)

Hadi, Abdul Salaam (2020) Development of sustainability performance model for turning process by using neural network model. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hadi, Agung Efriyo and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Ramli, Junid and Tezara, Cionita and Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Rihayat, Teuku (2021) Application of micromechanical modelling for the evaluation of elastic moduli of hybrid woven jute–ramie reinforced unsaturated polyester composites. Polymers, 13 (15). pp. 1-11. ISSN 2073-4360. (Published)

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Muhammad Amin, Mohd Badari and Irawan, Agustinus Purna and Jamiluddin, Jaafar and Rihayat, Teuku and Ramli, Junid and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composites. Polymers, 14 (13). pp. 1-11. ISSN 2073-4360. (Published)

Hadi, Manap and Yasir, Hashim Naif and Alsibai, Alsibai and Muhammad Sharfi, Najib and Mohd Anwar, Zawawi Optimization of the wavelength of lambda sensor. , [Research Book Profile: Research Report] (Unpublished)

Hadianatun Saadiah, Jasni (2013) Design and fabrication of printer table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hafezatul Rasyidah, Othman (2010) Wind environment evaluation on major town of Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Hafizi, Z. M. and Ibrahim, I. N, and Vorathin, E. (2023) Delamination detection in thin-walled composite structures using acoustic pitch-catch technique with Fiber Bragg Grating Sensors. Jurnal Teknologi (Sciences & Engineering), 85 (3). pp. 35-42. ISSN 2180–3722. (Published)

Hafizi, Z. M. and Nizwan, Che Ku Eddy and Ghazali, M. F. and Idris, Daing Mohamad Nafiz and Sani, M. S.M. (2019) A development of a damage monitoring system using an embedded fiber Bragg grating sensors. , [Research Report: Research Report] (Unpublished)

Hafizi, Z. M. and Yusof, Mohd Fadhlan M. and Ghazali, M. F. and Sani, M. S.M. (2016) The application of dynamic pressure sensor based on fiber Bragg grating for monitoring of water supply system. , [Research Report: Research Report] (Unpublished)

Hafnizar, Muhamad Shaharuddin (2008) Simulation of four stroke free piston diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hagos, F. Y. and A. R. A., Aziz and S. A., Sulaiman (2015) Investigation Of Deposit Formation In Direct-Injection Spark-Ignition Engine Powered On Syngas. International Journal of Automotive Technology (IJAT), 16 (3). pp. 479-485. ISSN 1229-9138 (print);1976-3832 (online). (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2015) Methane Enrichment of Syngas (H2/CO) in a Spark-ignition Direct-injection Engine: Combustion, Performance and Emissions Comparison With Syngas and Compressed Natural Gas. Energy, 90 (Prt. 2). pp. 2006-2015. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2014) Syngas (H2/CO) in a Spark-Ignition Direct-Injection Engine. Part 1: Combustion, Performance and Emissions Comparison with CNG. International Journal of Hydrogen Energy, 39 (31). pp. 17884-17895. ISSN 0360-3199. (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman and Firmansyah, F. and R., Mamat (2017) Effect of Fuel Injection Timing of Hydrogen Rich Syngas Augmented With Methane in Direct-Injection Spark-Ignition Engine. International Journal of Hydrogen Energy, 42 (37). pp. 23846-23855. ISSN 0360-3199. (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman and R., Mamat (2019) Engine speed and air-fuel ratio effect on the combustion of methane augmented hydrogen rich syngas in DI SI engine. International Journal of Hydrogen Energy, 44 (1). pp. 477-486. ISSN 0360-3199. (Published)

Hagos, F. Y. and Abd Rashid, A. Aziz and Shaharin, A. Sulaiman (2016) Effect of Injection Timing on Combustion, Performance and Emissions of Lean-burn Syngas (H2/CO) in Spark-Ignition Direct-Injection Engine. International Journal of Engine Research, 17 (9). pp. 921-933. ISSN 1468-0874 (print); 2041-3149 (online). (Published)

Hagos, F. Y. and Abd Rashid, Abd Aziz and Shaharin Anwar, Sulaiman and Mahgoub, Bahaaddein K. M. (2016) Low and Medium Calorific Value Gasification Gas Combustion in IC Engines. In: Developments in Combustion Technology. InTech, Croatia, pp. 1-28. ISBN 978-953-51-2668-3 (Print); 978-953-51-2669-0 (Online)

Hagos, F. Y. and M. Mukhtar, N. Awalludin and M. M., Noor and R., Mamat and Abdul Adam, Abdullah (2018) Environmental-friendly tri-fuel emulsion. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Unpublished)

Hagos, F. Y. and Obed M., Ali and R., Mamat and Abdul Adam, Abdullah (2017) Effect Of Emulsification And Blending On The Oxygenation And Substitution Of Diesel Fuel For Compression Ignition Engine. Renewable and Sustainable Energy Reviews, 75. pp. 1281-1294. ISSN 1364-0321. (Published)

Hagos, Ftwi Yohaness and Azmi, W. H. and Mamat, Rizalman and Abdullah, Abdul Adam and Aziz, Amir and Oumer, Ahmed Nurye (2017) Experimental and numerical investigation of phase material as heat storage from a concentrating solar collector. , [Research Report: Research Report] (Unpublished)

Hagos, Ftwi Yohaness and Rizalman, Mamat and Abdul Adam, Abdullah and Amir, Aziz and Omer, Ahmed Nurye and Abd. Rashid, Abd. Aziz (2015) Investigation of micro-explosion phenomenon in the combustion of tri-fuel (diesel, biodiesel and bioethanol) emulsion in compression ignition engines. , [Research Book Profile: Research Report] (Unpublished)

Hagos, Ftwi Yohaness and Zailan, Roziah and Kulkarni, R. R. and Singh, Lakhveer (2019) Syngas generation from thermochemical conversion of locally available biomass waste for automotive. , [Research Report: Research Report] (Unpublished)

Hairul, Bakri and Mohd Adnin, Hamidi and Mohd Shukri, Yob (2019) Finite Element Analysis on critical relative slippage of bolted joint under transverse loading. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 172-173.. ISBN 978-967-2145-65-3 (online)

Haizad, Hassim and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum milling parameters in micro dimples machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). 73- 81. ISSN 2636-9575. (Published)

Halim, Qayyum and Nik Mohamed, Nik Abdullah and Rejab, M. R. M. and Kamarulzaman, Mohd Kamal and Hisham, Sakinah and Aizzuddin, A.M. (2022) Laser processing of La61.4Al15.9Ni11.35Cu11.35 based functionally graded material bulk metallic glass. In: Lecture Notes in Mechanical Engineering: 2nd Energy Security and Chemical Engineering Congress, (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 309-323.. ISBN 978-981-19-4425-3

Halim Zakaria, Othman (2009) Stability of a two wheels mobile robot using robust control. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Hamada, K. I. and M. M., Rahman (2014) An Experimental Study for Performance and Emissions of a Small Four-Stroke SI Engine For Modern Motorcycle. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1852-1865. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hamada, K. I. and Mohammed, M. K. and M. M., Rahman (2014) Development of a Test-Rig for a Modern Motorcycle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2034-2041. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hamada, Khalaf I. and M. M., Rahman and A. Rashid, A. Aziz (2013) Parametric Study Of Instantaneous Heat Transfer Based on Multidimensional Model in Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (28). pp. 12465-12480. ISSN 0360-3199. (Published)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hamada, Khalaf I. and M. M., Rahman and M. A., Abdullah and R. A., Bakar and A. Rashid, A. Aziz (2013) Effect of Mixture Strength and Injection Timing on Combustion Characteristics of a Direct Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (9). pp. 3793-3801. ISSN 0360-3199. (Published)

Hamada, Khalaf I. and Rahim, M. F. and Raham, M. M. and A. Bakar, Rosli (2022) Throttling effect on the performance and emissions of a multi-cylinder gasoline fuelled spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10084-10093. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Hamat, A. Malik and M. F., Ghazali and Amin, Makeen and Fatihah, Adnan (2016) Irregularity detection in artificial signal using time-frequency analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608. (Published)

Hamdan, Z. A and Ahmad, Z. and Johari, N. H. (2022) Investigation of muscle fatigue of the archer’s during endurance shooting. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 8987 -8995. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hamdi Abdullah, Mohammed Mudhsh (2013) Design and analysis of piping system for an open channel flume’s flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hamid, Yusoff and M. Z., Abdullah and Kamarul Arifin, Ahmad and M. K., Abdullah and Shafiq, Suhaimi (2014) Experimental Study on the Effect of Skin Flexibility on Aerodynamic Performance of Flapping Wings for Micro Air Vehicles. Applied Mechanics and Materials, 629. pp. 18-23. ISSN 1662-7482. (Published)

Hamidi, M. A. Development of ignition mechanism through transient species analysis. , [Research Report: Research Report] (Unpublished)

Hamisa, A. H. and Azmi, W. H. and Mohd Yusof, Taib and Sharif, M. Z. and Dahlan, A. A. (2021) Development of automotive air-conditioning system test rig for hybrid electric vehicles. In: Journal of Physics: Conference Series; 2020 International Conference on Innovative Technology and Sciences, ICITSS 2020 , 12 - 13 November 2020 , Kuantan, Virtual. pp. 1-11., 2000 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Hamisa, A. H. and Azmi, W. H. and N. N. M., Zawawi and Sharif, M. Z. and Shaiful, A. I. M. (2019) Comparative study of single and composite nanolubricants in automotive air-conditioning (AAC) system performance. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (012044). ISSN 1757-899X

Hamisa, Abdul Hamid and Wan Hamzah, Wan Azmi and Mohd Farid, Ismail and Rosminazuin, Ab Rahim and Ali, Hafiz Muhammad (2023) Tribology performance of polyol-ester based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (18). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Hamizatun, Mohd Fazi (2013) Correlation study of the strain and vibration signals of a beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and Azizul Qayyum, Basri (2019) Risks assessment at automotive manufacturing company and ergonomic working condition. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012106). ISSN 1757-8981 (Print); 1757-899X (Online)

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2016) Ergonomics study for workers at food production industry. In: 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute (MAI)Cyberjaya, Selangor. pp. 1-7., 90. ISSN 2261236X

Hamood, M and Oumer, A. N. and Azizuddin, Abd Aziz and M., Ishak and Siregar, J. P. and Mamat, O (2021) Heat transfer analysis in compact heat exchanger with fibre reinforced plate. In: IOP Conference Series: Materials Science and Engineering, Volume 1078, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , Pekan, Malaysia , 19-20 January 2021. pp. 1-9., 1078. ISSN 1757-8981 (Print); 1757-899X (Online)

Hamzah, Ahmad (2004) Feasibility study on robot off-line programming and simulation using matlab tools : simmechanics and simulink packages. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hamzah, Ahmad and Siti Nur Aini, Basiran (2015) Fuzzy logic based vehicle speed control performance considering different membership types. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9773-9778. ISSN 1819-6608. (Published)

Hanafi, M. Yusop and Ghazali, M. F. and Yusof, M. F.M. and Pi Remli, Muhammad Aminuddin and Mohd Sabri, Ahmad Azri Syazwan (2022) Leakage identification based on hydraulic transient analysis. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 37..

Hanafi, M. Yusop and M. F., Ghazali and Azmi, W. H. and Mohd Fadhlan, Mohd Yusof and M. A., Pi Remli and M. A. A., Rahim (2019) A Study of Ikaz and Normalized Hilbert transform for solving faulty in pipeline distribution system using transmission line modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012083). ISSN 1757-899X

Hanafi, M. Yusop and M. F., Ghazali and M. F. M., Yusof and M. A., Pi Remli (2018) Fault identification in pipeline system using normalized hilbert huang transform and automatic selection of intrinsic mode function. In: MATEC Web of Conferences: 3rd International Conference on Design and Manufacturing Engineering, ICDME 2018 , 16 - 18 July 2018 , Monash University, Melbourne, Australia. pp. 1-6.. ISSN 2261236X

Hanafi, M. Yusop and M. F., Ghazali and M. F. M., Yusof and Remli, M. A. Pi and Karollah, B. and Rusman, . (2017) The Use of Transmission Line Modelling to Test the Effectiveness of I-kaz as Autonomous Selection of Intrinsic Mode Function. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-10., 257 (012070). ISSN 1757-899X

Hanafi, M. Yusop and M. F., Ghazali and M. F. M., Yusof and Remli, M. A. Pi and M. H., Kamarulzaman (2017) Pipe Leak Diagnostic Using High Frequency Piezoelectric Pressure Sensor And Automatic Selection Of Intrinsic Mode Function. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-10., 257 (012091). ISSN 1757-899X

Hanafi, M. Yusop and M. F., Ghazali and M. F. M., Yusof and Wan Sofian, Wan Hamat (2017) Improvement of Cepstrum Analysis for the Purpose to Detect Leak, Feature and Its Location in Water Distribution System based on Pressure Transient Analysis. Journal of Mechanical Engineering, SI 4 (4). pp. 102-122. ISSN 1823-5514. (Published)

Hanafi, M. Yusop and M. F., Ghazali and Mohd Fadhlan, Mohd Yusof and Wan Sofian, Wan Hamat (2017) Development of intelligent leak detection system based on artificial pressure transient signal using integrated Kurtosis-based Algorithm for Z-filter Technique (I-Kaz). Journal of Mechanical Engineering, 4 (4). pp. 84-102. ISSN 1823-5514 (Print); 2550-164X (Online). (Published)

Hanafi, M. Yusop and M. F., Ghazali and W. H., Azmi and M. F. M., Yusof and M. A., PiRemli and M. A., A. Rahim (2018) Exploration of ikaz and normalized hilbert transform for solving faulty in pipeline distribution system using transmission line modelling. In: 1st International Postgraduates Conference On Mechanical Engineering (IPCME) 2018 , 31 Oktober 2018 , UMP Pekan. pp. 1-9.. (Unpublished)

Hanafi, M. Yusop and M. F., Ghazali and W. H., Azmi and Mohd Fadhlan, Mohd Yusof and M. A., PiRemli and M. Z., Noordin (2019) Application of Ikaz and direct quadrature for solving leakage in pipeline distribution by using transmission line modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-9., 469. ISSN 1757-8981 (Print); 1757-899X (Online)

Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2020) Effect of filler composition on microstructure and mechanical properties of MIG welded AA6061 and AA7075. In: National Conference For Postgraduate Research 2020 (NCON-PGR 2020) , 9 December 2020 , Universiti Malaysia Pahang. pp. 147-160.. (Submitted)

Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2021) Microstructure analysis and mechanical properties of dissimilar AA6061-AA7075 laser brazing with prefixed ER5356 filler. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012022). ISSN 1757-899X

Haneef, M. S. and Lau, G. H. and Aiman, M. H. and Quazi, M. M. and Mahadzir, I. (2023) Effect of laser micro-drilling parameters on hole geometry and hole formation of thin sheet SS304. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 803 -813.. ISSN 2195-4356 ISBN 978-981191456-0

Haneef, Mohd Sabki (2023) Effect of material thickness on Duration, hole characteristics, and drilling mechanism on micro-laser drilling. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aiman, Mohd Halil).

Hanif, Kasmani (2011) Flame propagation in spark ignition engine combustion process using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hanipah, M. Razali Motion control algorithm development and testing for a free-piston engine generator. , [Research Report: Research Report] (Unpublished)

Hanipah, M. Razali and Jafferi, Jamaludin and Heerwan, P. M. and Mohamed, Zamri and Abdullah, Abdul Adam (2017) Development and characterisation of a flexible valve timing system towards optimised performance of small internal combustion engines. , [Research Report: Research Report] (Unpublished)

Hanis Hazirah, Arifin and Nurfarahin, Zainal and Libriati, Zardasti and Nordin, Yahaya and Lim, Kar Sing and Norhazilan, Md Noor (2019) Mechanical properties of carbon nanotubes-modified epoxy grout for pipeline repair system. Jurnal Teknologi (Sciences & Engineering), 81 (3). pp. 169-177. ISSN 2180–3722. (Published)

Hanon, Muammel M. and Zsidai, László and Ma, Quanjin (2021) Accuracy investigation of 3D printed PLA with various process parameters and different colors. In: Materials Today: Proceedings; 3rd International Conference on Materials Engineering and Science, IConMEAS 2020 , 28 - 30 December 2020 , Kuala Lumpur, Malaysia. 3089 -3096., 42 (5). ISSN 2214-7853

Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2017) Modeling of Temperature and Aifflow Pattern In a Refrigerator. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3054-3060. ISSN 1819-6608. (Published)

Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2016) Predicting Airflow and Temperature Pattern Inside A Refrigerator Through CFD. ARPN Journal of Engineering and Applied Sciences, 11 (14). 8621 -8628. ISSN 1819-6608. (Published)

Haque, Muhammad E. and R. A., Bakar and K., Kadirgama and M. M., Noor and Shakaib, M. (2016) Performance of a Domestic Refrigerator Using Nanoparticles-Based Polyolester Oil Lubricant. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1778-1791. ISSN 2289-4659. (Published)

Haque, Muhammad Ehteshamul (2019) A CFD model development and performance investigation of frost free refrigerator with nanoparticles suspended in the lubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Hardinnawirda, Kahar (2017) Effect of electroless nickel-boron (EN-B) surface finish on solderability of SAC305 and solder joint strength. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris (2017) A Review on Effect of Surface Finish and Cooling Rate on Solder Joint Reliability. In: High Performance and Optimum Design of Structures and Materials II. WIT Transactions on The Built Environmen. WIT Press, pp. 1-3. ISBN 9781784661434

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Deposition of Electroless Nickel Boron as Printed Circuit Board Surface Finish. Advanced Materials Research, 1133. pp. 391-395. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2015) Effect of Cooling and Isothermal Aging on Microstructure Using Electroless Nickel (Boron) Plating. Applied Mechanics and Materials, 695. pp. 352-356. ISSN 1662-7482. (Published)

Hariram, Nediyirippil Prakasan and Mekha, K. B. and Suganthan, Vipinraj and Sudhakar, Kumarasamy (2023) Sustainalism: An integrated socio-economic-environmental model to address sustainable development and sustainability. Sustainability (Switzerland), 15 (10682). pp. 1-37. ISSN 2071-1050. (Published)

Hariz Sufiyan, Mohamed Sunari (2012) Investigation of machining performance of the PVD coated tungsten carbide by sandblasting pre-treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Haroon, Arshad and Shaharin, A Sulaiman and Hussain, Zahid and Naz, Yasin and F., Basrawi (2017) Microwave Assisted Pyrolysis of Plastic Waste for Production of Fuels: A Review. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2017 (SES 2017) , 26-27 September 2017 , Perak, Malaysia. pp. 1-7., 131 (02005). ISSN 2261-236X

Harraz Irfan, Nazaruddin and Mohd Razali, Daud (2021) Current collector-free independent battery railway vehicle. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Hartwig, J. B. and Hartwig, J. and S. N., Aqida (2016) X-Ray Topography. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-9. ISBN 978-0-12-803581-8

Harun, Safiq Irsyad and Siti Rabiatull Aisha, Idris and N., Tamar Jaya (2017) A study on the development of local exhaust ventilation system (LEV’s) for installation of laser cutting machine. In: Joining and Welding Symposium 2017 , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (012013). ISSN 17578981

Harun Dzulquornain, Idris and Ahmad Najmuddin, Ibrahim (2023) Effect of tag-to-anchor and multiple tag interference on uwb sensors accuracy for dynamic real-time position tracking of mobile robot in indoor environment. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023 - Proceedings , 17 June 2023 , Hybrid, Shah Alam. pp. 287-291.. ISBN 979-835032130-2

Hasan, Alsidqi and Ting, Wee Kiet and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badhrulhisham, Abdul Aziz and Fourie, Andy (2018) Temperature change and the total stress anomaly in paste backfill. International Journal of GEOMATE, 14 (44). pp. 90-95. ISSN 2186-2990. (Published)

Hasan, M. M. and Rahman, Md Mustafizur and Rasul, M. G. (2021) The thermal and auto-ignition performance of a homogeneous charge compression ignition engine fuelled with diethyl ether and ethanol blends. Applied Thermal Engineering, 190 (116828). pp. 1-11. ISSN 1359-4311. (Published)

Hasan, M.M. and M., Ishak and M. R. M., Rejab (2017) Effect of pin tool design on the material flow of dissimilar AA7075-AA6061 friction stir welds. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-8., 257 (1). ISSN 17578981

Hasan, Md Munirul and Islam, M. S. and S., A. Bakar and M. M., Rahman and Kabir, M. N. (2021) Applications of artificial neural networks in engine cooling system. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. 471 -476..

Hasan, Mohammad Mehedi (2016) Numerical investigation on combustion, performance and emissions characteristics in homogeneous charge compression ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2018) Effect of pin tool flute radius on the material flow and tensile properties of dissimilar friction stir welded aluminum alloys. The International Journal of Advanced Manufacturing Technology, 98 (9-12). pp. 2747-2758. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2015) A Simplified Design of Clamping System and Fixtures for Friction Stir Welding of Aluminium Alloys. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1628-1639. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hasan, Mohammed Midhat (2017) Design of tool and backing/clamping system for dissimilar friction stir welding of high strength AA7075-T6 AND AA2024-T351 aluminum alloys. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

Hasan, Muda (2009) Effects of electrical discharge machining (EDM) jet flushing setting on the machining of tool steel workpiece. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasanah, Lilik and Nugroho, Harbi Setyo and Chandra, Wulandari and Budi, Mulyanti and Berhanuddin, Dilla Duryha and Mohamad Hazwan, Haron and Susthitha, Menon P. and Ahmad Rifqi, Md. Zain and Hamidah, Ida and Khairurrijal, Khairurrijal and R., Mamat (2019) Enhanced sensitivity of microring resonator-based sensors using the finite difference time domain method to detect glucose levels for diabetes monitoring. Applied Sciences, 10 (12). pp. 1-12. ISSN 2076-3417. (Published)

Hasbullah, Ishak (2009) Experimental study on strength of spot welded. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasfazri, Abdul Rahman (2012) Cylinder by cylinder engine modeling of single cylinder 4 stroke engine for control system development. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hashem, Mohammed Abdo (2017) Development of autonomous vehicle for road marks painting. , [Research Report: Research Report] (Unpublished)

Haslizam, Abdullah and Mohd Adnin, Hamidi and Saiful Anwar, Che Ghani (2019) Process improvement of multiple agarwood oil extractions using low-cost multi-channel temperature data logger. In: International Conference On Advances In Mechanical Engineering And Nanotechnology (ICAMEN 2019) , 6 - 11 March 2019 , Manipal University Jaipur India. pp. 1-6.. (Unpublished)

Hassan, A. Abdulhadi and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2016) Thermal Fatigue of Die-Casting Dies: An Overview. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00032). ISSN 2261-236X

Hassan, Md Mahmudul (2018) Investigation of the effect of butanol and ethanol alcohols on the combustion, performance and emission of diesel-biodiesel blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hassan, Md Mahmudul and Hagos, F. Y. and R., Mamat (2018) Comparative analysis of diesel, diesel-palm biodiesel and diesel-biodiesel-butanol blends in diesel engine. In: ASME Proceedings: 12th International Conference on Energy Sustainability , 24-28 June 2018 , Lake Buena Vista, Florida, USA. pp. 1-11. (ES2018-7571). ISBN 978-0-7918-5141-8

Hassan, Mohd Firdaus Nonlinear analysis of rotating machinery running on foil-air bearing. , [Research Report: Research Report] (Unpublished)

Hassan Abdulrssoul, Abdulhadi and S. N., Aqida and M., Ishak and I., Ismail and Ghusoon, Ridha Mohammed (2017) Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling. Metals, 7 (6). pp. 1-13. ISSN 2075-4701. (Published)

Hasyuzariza, M. Tobib and A. Aziz, Hairuddin and Nuraini, A. A. and M. M., Noor and J., Zulkiple and Mossa, Muntasser A. A. (2019) An Experimental Investigation On The Combustion And Performance Of An HCCI-DI Engine. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020010). ISBN 978-0-7354-1787-8

Hasyuzariza, M. Tobib and Rostam, Hamzah and A. A. Mossa, Muntasser and A. Aziz, Hairuddin and M. M., Noor (2019) The performance of an HCCI-DI engine fuelled with palm oil- based biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012079). ISSN 1757-899X

Hatem Ahmad, Mohamed Aljaerani (2023) Thermophysical and thermal cyclic behavior of nano-enhanced molten salts for concentrated solar power. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Hayder Baqer, Mahdi (2016) Effect of ambient temperature on the performance of combined cycle power plant with cooling system in a subtropical region. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hazami, Che Hussain and A. R., Yusoff (2014) Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method. Advanced Materials Research, 903. pp. 129-134. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hazan Idayu, Abdul Halim (2012) Computational analysis of heat conduction in nanowood composite boards. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazim, Khir and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad Shakeel, Ahmad and Samykano, Mahendran and Nasrudin, Abd Rahim (2024) Bismuth as efficient sintering aid for TiO2-based low temperature dye sensitized solar cell. Materials Science in Semiconductor Processing, 169 (107918). pp. 1-9. ISSN 1369-8001. (Published)

Hazim, Sharudin and Nik Rosli, Abdullah and A. M. I., Mamat and Obed M., Ali and R., Mamat (2015) An Overview of Spark Ignition Engine Operating on Lower-Higher Molecular Mass Alcohol Blended Gasoline Fuels. Jurnal Teknologi (Sciences and Engineering), 76 (5). pp. 101-105. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Hazim, Sharudin and Nik Rosli, Abdullah and G., Najafi and R., Mamat and H. H., Masjuki (2017) Investigation of The Effects of Iso-Butanol Additives on Spark Ignition Engine Fuelled with Methanol-Gasoline Blends. Applied Thermal Engineering, 114. pp. 593-600. ISSN 1359-4311. (Published)

Hazim, Sharudin and Nik Rosli, Abdullah and M. N. A. M., Yusof and H. H., Masjuki and Ali, Obed Majeed (2017) Investigation of the emission characteristics of iso-butanol additives on methanol-gasoline blends using spark ignition engine. Journal of Mechanical Engineering, S4 (1). pp. 93-106. ISSN 1823-5514 (Print); 2550-164X (Online). (Unpublished) (Unpublished)

Haziqatulhanis, Ibrahim (2023) Nanocellulose-based adsorbent from pandan leaves for copper ions removal from wastewater. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazlianie, Sazali).

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Norharyati, Wan Salleh (2019) A significant review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental. In: 4th International Manufacturing Engineering Conference (IMEC 2019) , 21-22 August 2019 , The Everly Hotel, Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Nor Hasrul Akhmal, Ngadiman and Nor Akmal, Fadil and Zawati, Harun (2022) Outlook on the Carbon-Based Materials for Heavy Metal Removal. Biointerface Research In Applied Chemistry, 12 (4). pp. 5303-5323. ISSN 2069-5837. (Published)

Hazirah, Ismail (2022) Investigation of quenching heat transfer characteristics in metal oxide nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Zuhairi, Sulaiman).

Hazirah, Ismail and Muhamad Zuhairi, Sulaiman and Okawa, Tomio (2022) Heat transfer characteristics of metallic body during quenching in saturated nanofluids. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9403-9411. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hazirah, Roslan (2018) Design and development of electrical system on hydrokinetic turbines for home power. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Haziratul Najihah, Othman (2012) Design and analysis of a cloth drying machine by using heat waste. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazizi Azri, Ahmad Sabri (2011) Experimental study of pack carburizing of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazman, Abu Hassan and Hagos, F. Y. and Kadarohman, Asep and Sardjono, R. E. and Khoerunnisa, Fitri and Bo, Zhang and Jiang, X. X. (2021) Engine emissions analysis of emulsified fuel of different blend ratios. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-10., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Hazman, Abu Hassan and R., Mamat and Ftwi Y., Hagos and Najafi, Gholamhassan (2019) Experimental of oxygenated fuel on diesel engine: fuel properties, performance and emission. International Journal of Integrated Engineering, 1. pp. 1-16. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. (2019) Reductions of Particulate Matter Emissions of a Diesel Engine Fueled with Oxygenated and Emulsion Fuels. Journal of Biobased Materials and Bioenergy, 13 (6). pp. 764-777. ISSN 1556-6560. (Published)

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. and Gholamhassan, Najafi (2019) Experiment of oxygenated fuel on diesel engine: Properties, performance and emission. In: International Symposium on Science, Technology and Engineering (ISSTE 2019) , 18-20 October 2019 , Melaka, Malaysia. pp. 1-14.. (Unpublished)

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. and Najafi, G. (2020) Experiment of oxygenated fuel on diesel engine: Performance, emission and particulate matter. International Journal of Nanoelectronics and Materials, 19 (Special). pp. 47-64. ISSN 1997-4434. (Published)

Hazrulzurina, Suhaimi (2019) Analysis of combustion characteristics, engine performances and exhaust emissions of long-chain alcohol-diesel fuel blends. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes Abdulla G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361. (Published)

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361. (Published)

Hazrulzurina, Suhaimi and Abdullah, Adam and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamarulzaman and Hagos, F. Y. (2019) A comparative analysis on emissions of some next generation long-chain alcohol/diesel blends in a direct-injection diesel engine. In: AIP Conference Proceedings: 3rd International Conference On Automotive Innovation Green Energy Vehicle (AIGEV2018) , 25-26 July 2018 , Kuantan, Malaysia. pp. 1-13., 2059 (020053). ISBN 978-0-7354-1787-8

Hazwan, Syafiq and A. M. N., Kamarizan and M. F., Ghazali and A. R., Yusoff (2016) Statistical Analysis of Deep Drilling Process Conditions Using Vibrations and Force Signals. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00002). ISSN 2261-236X

Hazwan, Syafiq and A. R., Yusoff and A. M. N., Kamarizan and M. F., Ghazali (2015) Statistical Analysis of Deep Drilling Processs Conditions Using Vibrations and Force Signals. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Heerwan, P. M. Invesigation on differential braking torque controller to improve the stability of small in-wheel electric vehicle. , [Research Report: Research Report] (Unpublished)

Heng, Yee Wien (2010) Impact of Co2 laser cutting parameters on the quality of cut on PMMA sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Herwansyah, Lago and Ping, Jack Soh and Mohd Faizal, Jamlos and Nursuriati, Shohaimi and Sen, Yan and Vandenbosch, Guy A. E. (2016) Textile Antenna Integrated with Compact AMC and Parasitic Elements for WLAN/WBAN Applications. Applied Physics A, 122 (1059). pp. 1-6. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

Herzwan, H. M. and Azri, Alias and R., Mamat (2019) Turbocharging small size engine to increase engine output: an assessment of turbocharger study field. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012089). ISSN 1757-8981

Hidayat, Untung and Hendrawati, Tri Yuni and Budiyanto, Budiyanto and Ramadhan, Anwar Ilmar and Wan Hamzah, Azmi (2022) Drying and pectin extraction from waste lemon peel (citrus limon) using extraction process with ultrasonic waves. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 225..

Hilmee, Mat Jusoh (2008) An investigation into effect of nitriding on fatigue life of piston. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2017) Application of Taguchi Method in optimization of design darameter for turbocharger vaned diffuser. Industrial Lubrication and Tribology, 69 (3). pp. 409-413. ISSN 0036-8792. (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2017) Application of Taguchi method in optimization of design parameter for turbocharger vaned diffuser. Industrial Lubrication and Tribology, 69 (3). pp. 409-413. ISSN 0036-8792. (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2018) Investigation of the pressure ratio and efficiency of a turbocharger centrifugal compressor with a vaned diffuser. World Review of Science, Technology and Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242. (Published)

Hilmi Asyraf, Razali (2009) Uncertainty analysis of two-shaft gas turbine parameter of artificial neural network (ANN) approximated function using sequential perturbation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hind, Mahmood Khudhur and Mustafa, Özakça and Abdolbaqi, Mohammed Khdher and Talha, Ekmekyapar (2016) Flexural Performance of PVA Reinforced ECC Beams: Numerical and Parametric Studies. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 625-640..

Hoang, A. T. and M. M., Noor and Pham, X. D. (2018) Comparative analysis on performance and emission characteristic of diesel engine fueled with heated coconut oil and diesel fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (1). pp. 5110-5125. ISSN 2180-1606. (Published)

Hogas, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2014) Effect of Air-fuel Ratio on the Combustion Characteristics of Syngas (H2:CO) in Direct-injection Spark-ignition Engine. Energy Procedia, 61. pp. 2567-2571. ISSN 1876-6102 . (Published)

Hoh, R. B. and Nasrul Azuan, Alang and Nasrul Hadi, Johari and Norhaida, Ab Razak and Juliawati, Alias (2023) Applying TRIZ to design and develop roof shield for two-wheeled motorcycle. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 15-23. ISSN 2636-9575. (Published)

Hoh, Rui Bin and Nasrul Azuan, Alang and M. I., M. Ramli and J., Alias and A. M., Romy Improvement of roof shield design using TRIZ method. In: UNSPECIFIED Springer.

Hojjat, Damirchi and G., Najafi and Siamak, Alizadehnia and B., Ghobadian and Talal, Yusaf and R., Mamat (2015) Design, Fabrication and Evaluation of Gamma-Type Stirling Engine to Produce Electricity from Biomass for the Micro-CHP System. Energy Procedia, 75. pp. 137-143. ISSN 1876-6102. (Published)

Hong Kun, Lu and Noor, M. M. and Wenlin, Yu and K., Kadirgama and Badruddin, I. A. and Kamangar, S. (2024) Experimental research on heat transfer characteristics of a battery liquid-cooling system with ⊥-shaped oscillating heat pipe under pulsating flow. International Journal of Heat and Mass Transfer, 224 (125363). pp. 1-15. ISSN 0017-9310. (Published)

Hoque, Md. Ikramul and Abdo Qasem, Mohammed Hasan and Parvez, Md. Shohan (2022) Municipal solid waste management in Khulna City Corporation Bangladesh. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 78..

Hoseini, S. S. and G., Najafi and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2019) Characterization of biodiesel production (ultrasonic-assisted) from evening-primroses (Oenothera lamarckiana) as novel feedstock and its effect on CI engine parameters. Renewable Energy, 130. pp. 50-60. ISSN 0960-1481. (Published)

Hoseini, S. S. and G., Najafi and Ghobadian, B. and R., Mamat and Nor Azwadi, Che Sidik and Azmi, W. H. (2017) The Effect of Combustion Management on Diesel Engine Emissions Fueled with Biodiesel-Diesel Blends. Renewable and Sustainable Energy Reviews, 73. pp. 307-331. ISSN 1364-0321. (Published)

Hoseini, S. S. and G., Najafi and Ghobadian, Barat and Yusaf, Talal and R., Mamat (2018) Experimental and numerical analysis of flow and heat transfer characteristics of EGR cooler in diesel engine. Applied Thermal Engineering, 140. pp. 745-758. ISSN 1359-4311. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and Ebadi, M. T. and R., Mamat and Yusaf, T. (2020) Performance and emission characteristics of a CI engine using graphene oxide (GO) nano-particles additives in biodiesel-diesel blends. Renewable Energy, 145. pp. 458-465. ISSN 0960-1481. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2018) Ailanthus altissima (tree of heaven) seed oil: Characterisation and optimisation of ultrasonication-assisted biodiesel production. Fuel, 220. pp. 621-630. ISSN 0016-2361. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2018) Novel environmentally friendly fuel: the effects of nanographene oxide additives on the performance and emission characteristics of diesel engines fuelled with Ailanthus altissima biodiesel. Renewable Energy, 125. pp. 283-294. ISSN 0960-1481. (Published)

Hoseini, S.S. and Najafi, G. and Ghobadian, B. and Rahimi, A. and Yusaf, Talal and R., Mamat and N. A. C., Sidik and Azmi, W. H. (2017) Effects of Biodiesel Fuel Obtained from Salvia Macrosiphon Oil (Ultrasonic-Assisted) On Performance and Emissions of Diesel Engine. Energy, 131. pp. 289-296. ISSN 0360-5442(print); 1873-6785(online). (Published)

Hou, Wentao and Ding, Yuquan and Huang, Guoqaing Qiang and Huda, Nazmul and Luqman Hakim, Ahmad Shah and Piao, Zhongyu and Shen, Yifu and Shen, Zhikang and Gerlich, Adrian P. (2022) The role of pin eccentricity in friction stir welding of Al‑Mg‑Si alloy sheets : microstructural evolution and mechanical properties. International Journal of Advanced Manufacturing Technology, 121 (11-12). pp. 7661-7675. ISSN 0268-3768. (Published)

Hou, Wentao and L. H., Shah and Huang, Guoqiang and Shen, Yifu and Gerlich, Adrian (2020) The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints. Journal of Alloys and Compounds, 825 (154045). pp. 1-30. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

How, Chun Kit and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Development of audio-visual speech recognition using deep-learning technique. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 88-95. ISSN 2637-0883. (Published)

Hu, Haichao and Wei, Qiang and Liu, Boya and Liu, Yun and Hu, Ning and Quanjin, Ma and Wang, Chuancai (2022) Progressive damage behaviour analysis and comparison with 2D/3D hashin failure models on carbon fibre–reinforced aluminium laminates. Polymers, 14 (2946). pp. 1-25. ISSN 2073-4360. (Published)

Huang, Guoqiang and Wu, Jie and Hou, Wentao and Luqman Hakim, Ahmad Shah and Midawi, Abdelbaset R. H. and Cao, Fujun and Gerlich, Adrian and Shen, Yifu and Meng, Fanqiang (2021) A novel two-step method to prepare fine-grained SiC/Al-Mg-Sc-Zr nanocomposite: Processing, microstructure and mechanical properties. Materials Science and Engineering: A, 823 (141764). pp. 1-14. ISSN 0921-5093. (Published)

Hung, William Chin Wei and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak and Mohamad Heerwan, Peeie (2022) Object tracking for autonomous vehicle using YOLO V3. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. pp. 265-273., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Husin, Husni and Mahidin, Mahidin and Marwan, Marwan and Nasution, Fahrizal and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Muchtar, Syawaliah and Yani, Firda Tirta and Rizalman, Mamat (2023) Conversion of polypropylene-derived crude pyrolytic oils using hydrothermal autoclave reactor and Ni/aceh natural zeolite as catalysts. Heliyon, 9 (e14880). pp. 1-10. ISSN 2405-8440. (Published)

Husnain, M.M.N. and Akramin, M. R.M. and Shaari, M. S. and Takahashi, Akiyuki and Bashiri, Abdullateef H. and Alshoaibi, Abdulnaser M. (2023) Comparison of Monte Carlo and bootstrap analyses for residual life and confidence interval. Materials Science- Poland, 41 (1). pp. 15-26. ISSN 2083-1331. (Published)

Husni, Husin and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Fahrizal, Nasution and Rinaldi, Wahyu and Abnisa, Faisal and Rizalman, Mamat (2022) Efficient hydrogen production by microwave-assisted catalysis for glycerol-water solutions via NiO/zeolite-CaO catalyst. South African Journal of Chemical Engineering, 41. pp. 43-50. ISSN 1026-9185. (Published)

Hussain, Abdul Ahad and Kamran, Kashif and Hina, Maryam and Ishaq, Mubashera and Naz, Muhammad Y and Bashir, Shahid and Sarwar, Nadeem and Quazi, Moinuddin Mohammed (2023) Effect of electrokinetic treatment time on energy consumption and salt ions removal from clayey soils. Materials Research Express, 10 (05550). ISSN 2053-1591. (Published)

Hussein, Adnan M. and Lingenthiran, Samylingam and K., Kadirgama and M. M., Noor and Aik, L. K. (2018) Palm oil based nanofluids for enhancing heat transfer and rheological properties. Heat and Mass Transfer, 54 (10). pp. 3163-3169. ISSN 0947-7411 (Print); 1432-1181 (Online). (Published)

Hwa, Phua Jia and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2022) The classification of electrooculography signals: A significant feature identification via mutual information. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 1005 -1012., 730. ISSN 1876-1100 ISBN 978-981-33-4596-6

Hyder, Farhan and Baredar, Prashant and Sudhakar, K. (2018) A novel Sun tracking technique through a Solar PV Tree and a smart controller. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 407-411.. ISBN 978-1-5386-3695-4

Hyder, Farhan and Baredar, Prashant and Sudhakar, K. and R., Mamat (2018) Performance and land footprint analysis of a solar photovoltaic tree. Journal of Cleaner Production, 187. pp. 432-448. ISSN 1879-1786. (Published)

Hyder, Farhan and K., Sudhakar and R., Mamat (2018) Solar PV Tree Design: A Review. Renewable and Sustainable Energy Reviews, 82 (Part 1). pp. 1079-1096. ISSN 1364-0321. (Published)

I

I, Samylingam and Aslfattahi, Navid and K., Kadirgama and Mahendran, Samykano and L., Samylingam and R., Saidur (2021) Improved Thermophysical Properties of Developed Ternary Nitrate-Based Phase Change Material Incorporated with MXene as Novel Nanocomposites. Energy Engineering, 118 (5). pp. 1253-1265. ISSN 0199-8595. (Published)

I., Ismail and S. N., Aqida (2014) Fluid-Particle Separation of Magnetorheological (MR) Fluid in MR Machining Application. Key Engineering Materials, 611 (612). pp. 746-755. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

I., Naiman and K., Kadirgama and D., Ramasamy (2019) Experimental and one dimensional investigation on nanocellulose and aluminium oxide hybrid nanofluid as a new coolant for radiator. In: 1st International Postgraduate Conference On Mechanical Engineering (IPCME 2018) , 31 Oktober 2018 , Library UMP Pekan. pp. 1-8., 469 (1). ISSN 1757-8981

I., Samylingam and K., Kadirgama and Aslfattahi, Navid and L., Samylingam and D., Ramasamy and W. S., Wan Harun and M., Samykano and R., Saidur (2021) Review on thermal energy storage and eutectic nitrate salt melting point. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-21., 1078 (012034). ISSN 1757-8981 (Print), 1757-899X (Online)

I. A., Kamaruddin and Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Abbas, Abdul Wahab (2022) Evaluation of a DC Motor temperature response characterization method under different sampling interval. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 345-360., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

I. M., Sollehudin and Mohamad Heerwan, Peeie (2020) Speed estimation of the electric-powered wheelchair by proposing the state observer method based on experimental data. SN Applied Sciences, 2 (2). pp. 1-8. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

I. M., Sollehudin and Mohamad Heerwan, Peeie (2019) The investigation on dynamic behavior of electric powered wheelchair during the obstacle avoidance. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

I. M., Yusri and Anwar, P. P. Abdul Majeed and R., Mamat and M. F., Ghazali and Awad, Omar I. and Azmi, W. H. (2018) A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renewable and Sustainable Energy Reviews, 90. pp. 665-686. ISSN 1364-0321. (Published)

I. M., Yusri and R., Mamat and A., Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2017) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Injection Spark Ignition Engine. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01036). ISSN 2261-236X

I. M., Yusri and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2016) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Spark Ignition Engines. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12.. (Unpublished)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and M. F., Othman and S. M., Rosdi (2017) Influences of Gasoline Fuels on Waste Heat Recovery Potentiality of a Spark Ignition Engine. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846(print); 0974-5645(online). (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and Mohd Hafizil, Mat Yasin and Ahmad Fitri, Yusop (2017) Investigation of Influences of Secondary butyl-alcohol Blends on Performance and Cycle-To-Cycle Variations in a Spark Ignition Engines. Energy Procedia, 110. pp. 310-315. ISSN 1876-6102 . (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and Obed M., Ali and A. I. M., Shaiful (2017) Application of Response Surface Methodology in Optimization of Performance and Exhaust Emissions of Secondary butyl alcohol-gasoline Blends in SI Engine. Energy Conversion and Management, 133. pp. 178-195. ISSN 0196-8904. (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and G., Najafi and N. A. C., Sidik and Awad, Omar I. (2016) Experimental Investigation of Combustion, Emissions and Thermal Balance of Secondary butyl alcohol-gasoline Blends in a Spark Ignition Engine. Energy Conversion and Management, 123. pp. 1-14. ISSN 0196-8904. (Published)

I. M., Yusri and R., Mamat and G., Najafi and A., Razman and Awad, Omar I. and Azmi, W. H. and W. M. F., Wan Ishak and A. I. M., Shaiful (2017) Alcohol Based Automotive Fuels from First Four Alcohol Family in Compression and Spark Ignition Engine: A Review on Engine Performance and Exhaust Emissions. Renewable and Sustainable Energy Reviews, 77. pp. 169-181. ISSN 1364-0321. (Published)

I. M., Yusri and R., Mamat and O. M., Ali and A., Aziz and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and Mahmudul, H. M. and S. M., Rosdi (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fueled with N-butanol Blends. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (012048). ISSN 1757-899X

I. M., Yusri and R., Mamat and Obed M., Ali and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and H. M., Mahmudul (2016) The Combustion Of N-Butanol-Diesel Fuel Blends And Its Cycle To Cycle Variability In A Modern Common-Rail Diesel Engine. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2297-2301. ISSN 1819-6608. (Published)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and I. M., Izhar and S. M., Asyraf and R. I. M., Eiman (2018) The investigation of vehicle dynamic behaviour during braking at different speed. In: 3rd International Conference On Design And Manufacturing Engineering (ICDME2018) , 16 - 18 July 2018 , Monash University, Melbourne, Australia. pp. 1-11.. (Unpublished)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and S. M., Asyraf and I. M., Sollehudin and I. M., Ishak (2020) Experimental Study on the Effect of Emergency Braking without Anti-Lock Braking System to Vehicle Dynamics Behaviour. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7832-7841. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Ahmad Najmuddin Simulation of assistive grouser mechanism for use on lightweight wheeled robot for traversing on unconsolidated soft sand inclines. , [Research Report: Research Report] (Unpublished)

Ibrahim, Mohammad Sollehudin and Peeie, M. H. (2020) The dynamic behavior investigation of electric power wheelchair during the obstacle avoidance. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012074). ISSN 1757-8981

Ibrahim, T. K. and M. M., Rahman (2014) Effect of Compression Ratio on the Performance of Different Strategies for the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. 1747-1757. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Tamir K. and M. M., Rahman (2015) Effects of Isentropic Efficiencies on the Performance of Combined Cycle Power Plants. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2914-2928. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and Awad, Omar I. and M. Kh., Abdolbaqi (2016) Thermal and Economic Analysis of Gas Turbine Using Inlet Air Cooling System. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 1-10.. (Unpublished)

Ibrahim, Thamir K. and F., Basrawi and Awad, Omar I. and Abdalla, Ahmed N. and G., Najafi and R., Mamat and Hagos, F. Y. (2017) Thermal Performance of Gas Turbine Power Plant Based on Exergy Analysis. Applied Thermal Engineering, 115. pp. 977-985. ISSN 1359-4311. (Published)

Ibrahim, Thamir K. and F., Basrawi and Marwah Noori, Mohammed and Hassan, Ibrahim (2016) Effect Of Perforation Area On Temperature Distribution Of The Rectangular Fins Under Natural Convection. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6371-6375. ISSN 1819-6608. (Published)

Ibrahim, Thamir K. and M. M., Rahman (2012) Parametric study of a two-shaft gas turbine cycle model of power plant. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-13., 36 (012024). ISSN 1757-899X

Ibrahim, Thamir K. and M. M., Rahman and Abdalla, Ahmed N. (2011) Optimum gas turbine configuration for improving the performance of combined cycle power plant. Procedia Engineering, 15. pp. 4216-4223. ISSN 1877-7058. (Published)

Ibrahim, Thamir K. and Marwah Noori, Mohammed and Mohammed, Kamil Mohammed and G., Najafi and Nor Azwadi, Che Sidik and F., Basrawi and Abdalla, Ahmed N. and Hoseini, S. S. (2018) Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer. International Journal of Heat and Mass Transfer, 118. pp. 832-846. ISSN 0017-9310. (Published)

Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Al Doori, Wadhah Hussein Abdulrazzaq and Al-Sammarraie, Ahmed Tawfeeq and F., Basrawi (2019) Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2). pp. 228-250. ISSN 2289-7879. (Published)

Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Awad, Omar I. and Abdalla, Ahmed N. and F., Basrawi and Marwah Noori, Mohammed and G., Najafi and R., Mamat (2018) A comprehensive review on the exergy analysis of combined cycle power plants. Renewable and Sustainable Energy Reviews, 90. pp. 835-850. ISSN 1364-0321. (Published)

Ibrahim Khalil, Adam and A. Rashid, A. Aziz and Suzana, Yusup and Morgan, Heikel and Hagos, F. Y. (2016) Optimization of Performance and Emissions of a Diesel Engine Fuelled with Rubber Seed-Palm Biodiesel Blends using Response Surface Method. Asian Journal of Applied Sciences, 4 (2). pp. 401-421. ISSN 2321–0893. (Published)

Ida Hamidah, . and Agus, Solehudin and Aam, Hamdani and Lilik, Hasanah and Khairurrijal, Khairurrijal and Tedi, Kurniawan and R., Mamat and Rina, Maryanti and Asep Bayu Dani, Nandiyanto and Hammouti, Belkheir (2021) Corrosion of copper alloys in KOH, NaOH, NaCl, and HCl electrolyte solutions and its impact to the mechanical properties. Alexandria Engineering Journal, 60 (2). pp. 2235-2243. ISSN 1110-0168. (Published)

Idris, Daing Mohamad Nafiz Computational method to estimate fatigue life and durability of spur gear by using stress-life (SN) and measurement of root stress data. , [Research Report: Research Report] (Unpublished)

Idris, Mat Sahat (2017) Fluid Mechanics 1. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-19-1

Idris, Mat Sahat and Ma, Quanjin and M. R. M., Rejab (2023) A study on 3D printing usage among Malaysian users. Journal of Mechanical Engineering and Sciences (JMES), 17 (2). 9483 -9491. ISSN 2231-8380 (online). (Published)

Idris, Mat Sahat and Mohd Nazrull, Syann Lesan and Mohd Azrul Hisham, Mohd Adib (2017) Development of Walking Gait Cue Stick with Laser and Stability Control for Patients with Traumatic Brain Injury. In: iMEDITEC 2017 Proceeding International Medical Device and Technology Conference , 6-7 September 2017 , Johor Bahru, Malaysia. pp. 244-246.. ISBN 978-967-0194-93-6

Idris, Mat Sahat and Oumer, Ahmed Nurye and Zulkifli, Ahmad@Manap and Mohd Ruzaimi, Mat Rejab (2018) Investigation of fibre reinforcement toward polymer production emphasizing fused deposition modelling. , [Research Book Profile: Research Report] (Unpublished)

Ihsan Ali, Ghani and Nor Azwadi, Che Sidik and R., Mamat and G., Najafi and Tan, Lit Ken and Yutaka, Asako and Wan Mohd Arif, Aziz Japar (2017) Heat Transfer Enhancement In Microchannel Heat Sink Using Hybrid Technique of Ribs and Secondary Channels. International Journal of Heat and Mass Transfer, 114. pp. 640-655. ISSN 0017-9310. (Published)

Ihsan Naiman, Ibrahim (2022) Simulation and experimental analysis on automotive radiator using organic nanocellulose. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Devarajan, Ramasamy).

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and D., Ramasamy and S. M., Soffie and Mohd Hafiz Dzarfan, Othman (2019) A review on vehicle radiator using various coolants. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 330-337. ISSN 2289-7879. (Published)

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and D., Ramasamy and Ahmad Shahir, Jamaludin and Mohd Syafiq, Sharip and Haziqatulhanis, Ibrahim (2019) Effect of impregnate nanocellulose with ethylene glycol for car radiator application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 43-50. ISSN 2289-7879. (Published)

Ikeda, Keigo and Kamimori, Kota and Kobayashi, Ikkei and Kuroda, Jumpei and Uchino, Daigo and Ogawa, Kazuki and Endo, Ayato and Kato, Taro and Liu, Xiaojun and Peeie, Mohamad Heerwan and Kato, Hideaki and Narita, Takayoshi (2023) Basic study on mechanical vibration suppression system using 2-degree-of-freedom vibration analysis. Vibration, 6 (2). pp. 407-420. ISSN 2571-631X. (Published)

Ilan Cheliyan, Samylingam (2021) Investigation of thermophysical properties of ternary nitrate based phase change material induced with mxene as novel class of nanocomposites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Ilva, Arashnia and G., Najafi and B., Ghobadian and Talal, Yusaf and R., Mamat and Maurice, Kettner (2015) Development of Micro-scale Biomass-fuelled CHP System Using Stirling Engine. Energy Procedia, 75. pp. 1108-1113. ISSN 1876-6102 . (Published)

Imam, Ul Ferdous (2022) Influence of notch constraint on creep damage evolution and rupture life of grade 91 steel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nasrul Azuan, Alang).

Imam Ul, Ferdous and N. A., Alang and J., Alias and A. H., Ahmad and Suraya, Mohd Nadzir (2023) Rupture Life and Failure Mechanism of Grade 91 Steel Under the Influence of Notch Constraint. Journal of Failure Analysis and Prevention, 23 (2). pp. 497-510. ISSN 1547-7029. (Published)

Imran, Ali and Quazi, M. M. and Zalnezhad, E. and Sarhan, Ahmed A. D. and N. Liana, Sukiman and M., Ishak (2019) Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals, 72 (10). pp. 2773-2781. ISSN 0972-2815. (Published)

Imtiaz, Ali (2023) Energy, exergy and economic analysis of nano-enhanced phase change materials integrated solar photovoltaic thermal systems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Imtiaz, Ali Laghari and Mahendran, Samykano and Pandey, A. K. and K., Kadirgama and Tyagi, V. V. (2020) Advancements in PV-thermal systems with and without phase change materials as a sustainable energy solution: energy, exergy and exergoeconomic (3E) analytic approach. Sustainable Energy & Fuels, 4 (10). pp. 4956-4987. ISSN 23984902. (Published)

Imtiaz, Ali Laghari and Reji Kumar, Rajamony and Pandey, A. K. and Mahendran, Samykano and Chopra, Kapil and Abusorrah, Abdullah M. and Sharma, Kamal and Tyagi, V. V. (2021) Energy, exergy, exergoeconomic and enviroeconomic (4-E) assessment of solar water heater with/without phase change material for building and other applications: a comprehensive review. Sustainable Energy Technologies and Assessments, 45. pp. 1-21. ISSN 2213-1388. (Published)

Inel, F. and M. M., Noor (2020) 3D cable-based parallel robot simulation using PD control. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012069). ISSN 1757-899X

Intan Nur Aqiella, Che Aziz and Ahmad Najmuddin, Ibrahim and Ikmanizardi, Basri and Fukuoka, Yasuhiro (2023) Rover wheel assistive grouser shape effects on traction force in flat soft terrain. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023 - Proceedings , 17 June 2023 , Hybrid, Shah Alam. pp. 281-286.. ISBN 979-835032130-2

Intan Nur Aqiella, Che Aziz and Ahmad Najmuddin, Ibrahim and Ikmanizardi, Basri and Fukuoka, Yasuhiroo (2023) Rover wheel assistive grouser angle of attack effects on traction force in soft terrain. In: 2023 19th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2023 - Conference Proceedings , 3-4 March 2023 , Kedah. pp. 236-241.. ISBN 978-166547692-8

Iqbal, A. K. M. Parvez and Zabri, N. H. M. and Sahari, K. S. M. and Iqbal, AKM Asif and Ishak, Aris (2015) Process Involved in Designing of an Intelligent Additional Track Mechanism Tracked Vehicle for Swamp Peat Terrain. Indian Journal of Science and Technology, 8 (17). pp. 1-6. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Iqbal, AKM Asif and Lim, Mei Jing (2023) A relationship of porosity and mechanical properties of spark plasma sintered scandia stabilized zirconia thermal barrier coating. Results in Engineering, 19 (101263). pp. 1-7. ISSN 2590-1230. (Published)

Iqbal, AKM Asif and Mei, Jing Lim and Nuruzzaman, D. M. (2017) Effect of compaction load and sintering temperature on the mechanical properties of the Al-SiC nano-composite materials. In: AIP Conference Proceedings: Advanced materials for sustainability and growth: Proceedings of the 3rd Advanced Materials Conference (AMC2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-8., 1901 (030006). ISSN 1551-7616 ISBN 978-0-7354-1589-8

Iqbal, AKM Asif and Norul Amierah, Nor Zamani (2017) Effect of reinforcement volume fraction on the mechanical properties of the Al-SiC nanocomposite materials. In: IOP Conference Series: Materials Science and Engineering, International Research and Innovation Summit (IRIS2017) , 6-7 May 2017 , Melaka, Malaysia. 012168., 226 (012168). ISSN 1757-8981

Iqbal, AKM Asif and Nuruzzaman, D. M. (2016) Effect of the Reinforcement on the Mechanical Properties of Aluminium Matrix Composite: A Review. International Journal of Applied Engineering Research, 11 (21). pp. 10408-10413. ISSN 0973-4562. (Published)

Irawan, Addie (2015) Development of mini forklift system for confined area. , [Research Report: Research Report] (Unpublished)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk,Al2O3, and Fe2O3on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Irlina Jazlin, Jamaludin and Islah Munjih, Ilmam Mumtaz and Zulkifli, Ahmad and Mohamad Zairi, Baharom (2023) Development of the table tennis robot launcher. In: Lecture Notes in Bioengineering; International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 - 15 November 2022 , Kuala Lumpur. 213 -222.. ISSN 2195-271X ISBN 978-981990296-5

Irnie, Zakaria and Azmi, W. H. and A. M. I., Mamat and R., Mamat and R. , Saidur and S. F., Abu Talib and W. A. N., W. Mohamed (2016) Thermal Analysis of Al2O3–water Ethylene Glycol Mixture Nanofluid for Single PEM Fuel Cell Cooling Plate: An Experimental Study. International Journal of Hydrogen Energy, 41 (9). pp. 5096-5112. ISSN 0360-3199. (Published)

Irnie, Zakaria and Azmi, W. H. and W. A. N., W. Mohamed and R., Mamat and G., Najafi (2015) Experimental Investigation of Thermal Conductivity and Electrical Conductivity of Al2O3 Nanofluid in Water - Ethylene Glycol Mixture for Proton Exchange Membrane Fuel Cell Application. International Communications in Heat and Mass Transfer, 61. pp. 61-68. ISSN 0735-1933. (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and K. I., Sainan (2015) Numerical Study On Heat Transfer Enhancement And Fluid Flow for Low Concentration of Al2O3 Water - Ethylene Glycol Mixture Nanofluid in A Single PEMFC Cooling Plate. Energy Procedia, 79. pp. 259-264. ISSN 1876-6102 . (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and S. F. A., Talib (2015) Experimental Investigation of Al2O3 - Water Ethylene Glycol Mixture Nanofluid Thermal Behaviour in a Single Cooling Plate for PEM Fuel Cell Application. Energy Procedia, 79. pp. 252-258. ISSN 1876-6102 . (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and Azmi, W. H. and A. M. I., Mamat and R., Mamat and W. R. W., Daud (2018) Thermo-electrical performance of PEM fuel cell using Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 119. pp. 460-471. ISSN 0017-9310. (Published)

Irnie, Zakaria and W. A. N. W., Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and K. I., Sainan and H., Ismail (2015) Thermal Analysis On Heat Transfer Enhancement And Fluid Flow for Low Concentration of Al2O3 Water - Ethylene Glycol Mixture Nanofluid in A Single PEMFC Cooling Plate. Energy Procedia, 79. pp. 259-264. ISSN 1876-6102 . (Published)

Irnie, Zakaria and W. A. N. W., Mohamed and Azmi, W. H. and A. M. I., Mamat and R., Mamat and W. R. W., Daud (2018) Thermo-electrical performance of PEM fuel cell using Al2O3nanofluids. International Journal of Heat and Mass Transfer, 119. pp. 460-471. ISSN 0017-9310. (Published)

Irnie, Zakaria and Z., Michael and W. A. N., W. Mohamed and A. M. I., Mamat and Azmi, W. H. and R., Mamat and R., Saidur (2015) A Review of Nanofluid Adoption in Polymer Electrolyte Membrane (PEM) Fuel Cells as an Alternative Coolant. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1351-1366. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and N. H.A., Azid and M. A., Suhaimi and Wan Hamzah, Azmi (2022) Heat transfer and electrical discharge of hybrid nanofluid coolants in a fuel cell cooling channel application. Applied Thermal Engineering, 210 (118369). pp. 1-13. ISSN 1359-4311. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and Wan Azmi, Wan Hamzah (2018) Numerical analysis of SiO2 nanofluid performance in serpentine PEMFC cooling plate. International Journal of Engineering & Technology, 7 (4). pp. 170-174. ISSN 2227-524X. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and Zailan, M. B. and Azmi, W. H. (2019) Experimental analysis of SiO2-distilled water nanofluids in a polymer electrolyte membrane fuel cell parallel channel cooling plate. International Journal of Hydrogen Energy, 44 (47). pp. 25850-25862. ISSN 0360-3199. (Published)

Irshad, Kashif and Habib, Khairul and Kareem, M. W. and F., Basrawi and Bidyut, Baran Saha (2017) Evaluation of Thermal Comfort in a Test Room Equipped with a Photovoltaic Assisted Thermo-Electric Air Duct Cooling System. International Journal of Hydrogen Energy, 42. pp. 26956-26972. ISSN 0360-3199. (Published)

Irshad Ahamad, Khilji and Siti Nadiah, Mohd Saffe (2021) Collection of nanoparticles using novel filter process by edm. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Isafiq, M. and Shayfull, Z. and Nasir, S. M. and Rashidi, M. M. and Fathullah, M. and Noriman, N. Z. (2016) Shrinkage Analysis on Thick Plate Part using Response Surface Methodology (RSM). In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78 (01084). ISSN 2261-236X

Ishak, M. (2018) Development of force and temperature controlled friction stir welding machine (FSW) for dissimilar metal joining application. , [Research Report: Research Report] (Unpublished)

Ishak, M. and Idris, Siti Rabiatull Aisha and Ahmad Shah, Luqman Hakim and Rejab, Mohd Ruzaimi Mat (2017) Development of welded stiffener plates using dissimilar and similar metal joining technique. , [Research Report: Research Report] (Unpublished)

Ishak, M. and Idris, Siti Rabiatull Aisha and Aiman, M. H. and Yusoff, Wan Azhar (2017) Dissimilar metal joining of aluminium and magnesium alloy by gas metal arc spot welding technique. , [Research Report: Research Report] (Unpublished)

Iskandar, Hasanuddin and Akram, Tamlicha and Samsul, Rizal and Noor, M. M. and Ikramullah, . and Nazaruddin, Nazaruddin (2024) The simulation of drop-weight impact test on ramie-eglass hybrid fiber composite for kayoh jaloe wall material. Jurnal Polimesin, 22 (1). pp. 75-82. ISSN 2549-1999. (Published)

Iskandar, Waini and Najiyah Safwa, Khashi’ie and Nurul Amira, Zainal and Khairum, Hamzah and Mohd Kasim, Abdul Rahman and Anuar, Ishak and Pop, Ioan (2023) Flow and thermal characteristics of couple stress fluid over a stretching surface with hybrid nanoparticles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (2). pp. 107-115. ISSN 2289-7879. (Published)

Islam, M. R. and M., Ishak and Luqman Hakim, Ahmad Shah and Siti Rabiatull Aisha, Idris and Meric, C. (2016) Dissimilar Welding Of A7075-T651 and AZ31B Alloys by Gas Metal Arc Plug Welding Method. The International Journal of Advanced Manufacturing Technology, 88 (9). pp. 2773-2783. ISSN 0268-3768(Print); 1433-3015(Online). (Published)

Ismail, Ab.llah (2010) Performance of coated carbide cutting tool while machining aluminium alloy and mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ismail, Izwan (2018) Development of a magnetorheological pinched mode valve for automotive semi-automotive semi-active suspension system. , [Research Report: Research Report] (Unpublished)

Ismail, Mohd Khairuddin and Lim, Shi Xuen and Mohd Azraai, Mohd Razman and Jessnor Arif, Mat Jizat and Yuen, Edmund and Jiang, Haochuan and Yap, Eng Hwa and Anwar, P. P. Abdul Majeed (2023) The Classification of Wafer Defects: A Support Vector Machine with Different DenseNet Transfer Learning Models Evaluation. In: Robot Intelligence Technology and Applications 7: RiTA 2022 , 7-9 December 2022 , Daejeon, Korea. pp. 304-309., 642. ISBN 978-3-031-26889-2

Ismail, Mohd Khairuddin and Shahrul Naim, Sidek and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Asmarani, Ahmad Puzi and Hazlina, Md Yusof (2021) The classification of movement intention through machine learning models: the identification of significant time-domain EMG features. PeerJ Computer Science, 7. pp. 1-15. ISSN 2376-5992. (Published)

Ismail, Muhammad Yusri and Beg, M. S. and Jamlos, M. F. and Azmi, W. H. and Badrulhisam, N. H. and Awad, Omar I. (2022) Potential and limitation of internet of things (IOT) application in the automotive industry: An overview. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 9939 -9949. ISSN 2180-1606. (Published)

Ismail, Nuurdianty (2006) Mini smart car. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Jamari, Jamari and Pradiptya, Putut Yoga and Muhamadin, Rilo Chandra and Nugraha, Fariz Wisda and Rusiyanto, Rusiyanto and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Investigating the effect of deacetylation temperature on the characterization of chitosan from crab shells as a candidate for organic nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 55-67. ISSN 2289-7879. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Munanda, Rafi and Nugraha, Fariz Wisda and Rusiyanto, R. and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Design, manufacturing and characterization of biodegradable bone screw from PLA Prepared by fused deposition modelling (FDM) 3D printing technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 205-215. ISSN 2289-7879. (Published)

Ismail, Z. and A. Z. C., Ong and Abdul Ghaffar, Abdul Rahman (2011) Crack damage detection of reinforced concrete beams using local stiffness indicator. Scientific Research and Essays, 6 (34). pp. 6798-6803. ISSN 1992-2248. (Published)

Ismail, Zulhelmi and W. Idris, Wan Farhana and Abdullah, Abu Hannifa (2021) From shear exfoliation of graphite in Coca-Cola® to few-layer graphene for smart ink. Ceramics International, 47 (16). pp. 23309-23317. ISSN 0272-8842. (Published)

Ismail Ali, Abdul Aziz (2022) Tooth bending stress and tooth impact stress of thin-rimmed spur gear. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Daing Mohamad Nafiz, Daing Idris).

Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Mohd Hasnun Ariff, Hassan and F., Basrawi and Ahmad Fitri, Yusop and Wafiuddin, Md Ghazali (2017) Finite element analysis on effects of rim and web thicknesses on root stress of thin-rimmed spur gear with asymmetric web arrangement. In: 3rd Advanced Materials Conference (AMC 2016) , 28 - 29 November 2016 , Bayview Hotel, Langkawi, Kedah. , 1901 (1). ISSN 0094-243X

Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Mohd Hasnun Ariff, Hassan and Mohamad Firdaus, Basrawi (2018) Finite element analysis of impact energy on spur gear. MATEC Web of Conferences, 225 (06011). pp. 1-9. ISSN 2261-236X. (Published)

Ismail Ali, Abdul Aziz and S. R., Mohd Hanafi and Daing Mohamad Nafiz, Daing Idris and M. R. M., Rejab and Mohd Hasnun Ariff, Hassan and F., Basrawi (2017) Investigating Effects of Rim and Web Thicknesses on Root Stress of Thin-rimmed Spur Gear with Symmetric Web Arrangement. In: MECHANICAL ENGINEERING RESEARCH DAY 2017 , 30 Mac 2017 , Perpustakaan UTEM. pp. 1-2.. ISBN 978-967-0257-88-4 (online)

Ismail Ali, Hj Abdul Aziz and D. M. N., D. Idris and Wafiuddin, Md Ghazali (2016) Investigating Bending Strength of Spur Gear : A Review. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01037).

Ismayuzri, Ishak (2008) Small cleaning robot for office window. Faculty Of Mechanical Engineering, Universiti Malaysia Pahang.

Ismayuzri, Ishak and Larochelle, Pierre (2019) MotoMaker: A robot FDM platform for multi-plane and 3D lattice structure printing. Mechanics Based Design of Structures and Machines, 47 (6). pp. 703-720. ISSN 1539-7734. (Published)

Izar Farhan, Nor Khiri (2009) The best compression ratio of modified piston for compressed natural gas(CNG)usage. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Izuan, Izzudin and Ahmad Fitri, Yusop and Syazwana, Sapee and Mohd Adnin, Hamidi and I. M., Yusri and R., Mamat and E., Erdiwansyah (2020) Experimental studies of engine single cylinder run on diesel-biodiesel-butanol blends. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981

Izzah, A. R. N. and Salwani, Mohd Salleh and Tan, S. W. and Mas Ayu, Hassan and R., Daud (2019) Effect of specimen geometry, quenching and trigger mechanism on crushing performance of single hat column. In: 1st IOP Conference Series: International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012091). ISSN 1757-899X

Izzat, Nazar (2016) Mechanical behaviour of polymer based bamboo composite 1. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Izzuddin, Zaman and Abdurasad, M. R. and Manshoor, B. and Khalid, A. and M. S. M., Sani (2015) Study on Dynamic Behaviour of Grass Trimmer Using Finite Element Analysis. Applied Mechanics and Materials, 786. pp. 383-387. ISSN 1662-7482. (Published)

Izzuddin, Zaman and Shiau, Wei Chan and M. S. M., Sani (2017) Design analysis of mechanical jack for assembling canopy. In: International Conference on Machine Learning and Soft Computing, ICMLSC 2017 , 13-16 January 2017 , Ho Chi Minh City; Viet Nam. pp. 209-213.. ISBN 978-145034828-7

Izzudin, Nazar (2016) Analysis of wear on abrasive water jet nozzle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Izzul Izwan, Ismail (2010) Modal analysis of engine piston rod for small engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

J

J., Alias (2017) The Influence of Hot Forming Process on the Microstructure and Corrosion Performance of Recycled Magnesium Alloys. In: International Corrosion Prevention Symposium for Research Scholars (CORSYM 2017) , 3-4 May 2017 , Kuala Lumpur, Malaysia. pp. 1-18.. (Unpublished)

J., Alias and Zhou, X. and Das, Sanjeev and El-Fakir, Omer and Thompson, G. E. (2017) Microstructure Evolution and Texture Development of Hot Form-Quench (HFQ) AZ31 Twin Roll Cast (TRC) Magnesium Alloy. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. , 1901 (130005). ISBN 978-0-7354-1589-8

J., Kananathan and K., Rajan and M., Samykano and K., Kadirgama and K., Moorthy and M. M., Rahman (2022) Preliminary Tensile Investigation of FDM Printed PLA/Coconut Wood Composite. In: ICMER 2021: Technological Advancement in Instrumentation & Human Engineering , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 339-350., 882. ISBN 978-981-15-7309-5

J., Mogan and L., Sandanamsamy and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review of FDM and graphene-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-14., 1078 (012032). ISSN 1757-899X

J. A., Ghani and C. H., Che Haron and Mohd Shahir, Kasim and Mohd Amri, Sulaiman and Siti Haryani, Tomadi (2016) Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process. Journal of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914 (print); 2044-5326 (online). (Published)

J. M., Zikri and M. S. M., Sani and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester with the additional of butanol. In: 1st International Colloquium On Noise, Vibration And Comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588

J. M., Zikri and M. S. M., Sani and Erdiwansyah, . and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester biodiesel as a fuel with the additional of butanol. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 2-11., 1262 (012012). ISSN 1742-6588 (print); 1742-6596 (online)

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Salleh, M. S. and Mohd Hazim, Mohd Hamdan and Tezara, Cionita and Teuku, Rihayat (2019) Important considerations in manufacturing of natural fiber composites: a review. International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (3). pp. 647-664. ISSN 2288-6206. (Published)

Jabbar, Waheb A. and Mei Ting, Tan and Mohd Fikri Ikmal, Hamidun and Ajwad Hariz, Che Kamarudin and Wu, Wenyan and Sultan, Jamil and Alsewari, Abdulrahman A. and Mohammad A.H., Ali (2024) Development of LoRaWAN-based IoT system for water quality monitoring in rural areas. Expert Systems with Applications, 242 (122862). pp. 1-18. ISSN 0957-4174. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj and Paul Nadakkal, John (2024) Multi-wall carbon nanotubes tailored eutectic composites for solar energy harvesting. Energy, 288 (129777). pp. 1-12. ISSN 0360-5442. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj A.L. and Samykano, Mahendran and Saidur, Rahman Md and Tyagi, Vineet Veer (2022) Concentrated Photovoltaic Thermal (CPVT) systems : Recent advancements in clean energy applications, thermal management and storage. Journal of Energy Storage, 45 (103369). pp. 1-25. ISSN 2352-152X. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Rahim, Nasrudin Abd and Selvaraj, Jeyraj and Mahendran, Samykano and Tyagi, Vineet Veer and Saidur, Rahman (2021) Investigation on thermophysical properties of metallic oxide nanoparticle dispersed in fatty acid. In: Materials Today: Proceedings; 3rd International Conference on Advances in Mechanical Engineering and Nanotechnology, ICAMEN 2021 , 18-19 March 2021 , Jaipur. pp. 2864-2868., 47 (11). ISSN 2214-7853

Jadhav, Pramod and Bin Khalid, Zaied and Mishra, Puranjan and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2022) Challenges and emerging approaches in life cycle assessment of engineered nanomaterials usage in anaerobic bioreactor. In: Techno economics and Life Cycle Assessment of Bioreactors: Post-Covid19 Waste Management Approach. Elsevier, India, pp. 185-206. ISBN 978-0-323-89848-5

Jaffrey, V. and N. M. Zuki, N. M. and A. N. M., Rose (2017) Improvement of productivity in low volume production industry layout by using witness simulation software. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 257. ISSN 17578981

Jagathesvaran, Veeramony and M. Nafis, O. Z. (2022) A customizable controller for 3 axis modular CNC machine. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 55-62. ISSN 2636-9575. (Published)

Jakfar, Jakfar and Husin, Husni and Pontas, Komala and Mamat, Rizalman and Salleh, Mohd Rosdi and Zulrika, Mirna and Ahmadi, Ahmadi (2023) Modification of the fermentation process and papain enzymes in the manufacture of virgin coconut oil using optimization of response surface methodology, central composite design. Fermentation, 9 (434). pp. 1-14. ISSN 2311-5637. (Published)

Jaliliantabar, F. (2022) Thermal conductivity prediction of nano enhanced phase change materials: A comparative machine learning approach. Journal of Energy Storage, 46 (103633). pp. 1-20. ISSN 2352-152X. (Published)

Jaliliantabar, Farzad and Ghobadian, B. and Najafi, G. and R., Mamat and Carlucci, Antonio Paolo (2019) Multi-objective NSGA-II optimization of a compression ignition engine parameters using biodiesel fuel and exhaust gas recirculation. Energy, 187. pp. 1-2. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jaliliantabar, Farzad and Ghobadian, Barat and Carlucci, Antonio Paolo and Najafi, Gholamhassan and Rizalman, Mamat and Ficarella, Antonio and Strafella, Luciano and Santino, Angelo and De Domenico, Stefania (2019) A comprehensive study on the effect of pilot injection, EGR rate, IMEP and biodiesel characteristics on a CRDI diesel engine. Energy, 194 (116860). pp. 1-13. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jaliliantabar, Farzad and Najafi, Gholamhassan and Rizalman, Mamat and Ghobadian, Barat (2020) Prediction of maximum in-cylinder pressure by adaptive neuro-fuzzy inference system method. IOP Conf. Series: Materials Science and Engineering, 788 (012066). pp. 1-11. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Jaliliantabar, Farzad and Rizalman, Mamat and Kumarasamy, Sudhakar (2022) Latent heat prediction of nano enhanced phase change material by ann method. Energy Engineering: Journal of the Association of Energy Engineering, 119 (3). pp. 847-861. ISSN 0199-8595. (Published)

Jaliliantabar, Farzad and Rizalman, Mamat and Sudhakar, Kumarasamy (2021) Prediction of lithium-ion battery temperature in different operating conditions equipped with passive battery thermal management system by artificial neural networks. Materials Today: Proceedings, 48 (6). pp. 1796-1804. ISSN 2214-7853. (Published)

Jamaludin, Ahmad Shahir and Razak, N. H. and Ibrahim, Ahmad Najmuddin and Osman Zahid, Muhammed Nafis and Rosli, Nurrina and Yusoff, A. R. and Amiril, S. A.S. and Razali, Mohd Nizar Mhd (2019) Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material. , [Research Report: Research Report] (Unpublished)

James Lau, Tze Chen (2020) Thermophysical properties charaterisation of water based mango oxide hybrid nanofluid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

James Lau, Tze Chen and A. N., Oumer and Azizuddin, Abd Aziz and M. A., At-Tasneem (2019) Preparation and characterisation of mango bark and mango leaf nanoparticles for lubrication. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Jamil, Norlida and Zamri, Mohd Fawzi and Yusoff, A. R. (2020) Evaluation of minimal quantity lubrication effects on surface roughness in milling with coated and uncoated tools using kurtosis quantification method approach. In: 7th Mechanical Engineering Research Day (MERD'20) , 16 December 2020 , Kampus Teknologi UTeM (virtual), Melaka. pp. 369-370.. ISBN 978-967-2454-36-6

Jamilah, Mustafha (2012) Prediction of grinding machinability when grind aluminium alloy using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jamiluddin, Jaafar (2019) Characterization of short pineapple leaf fiber reinforced tapioca biopolymer composites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siregar, Januar Parlaungan).

Jamiluddin, Jaafar and Siregar, J. P. and A. N., Oumer and Mohammad Hazim, M. Hamdan and Tezara, C. and Mohd Sapuan, Salit (2018) Experimental Investigation on Performance of Short Pineapple Leaf Fiber Reinforced Tapioca Biopolymer Composites. BioResources, 13 (3). pp. 6341-6355. ISSN 1930-2126. (Published)

Jamiluddin, Jaafar and Siregar, J. P. and Mohd Bijarimi, Mat Piah and Cionita, Tezara and Sharmiza, Adnan and Teuku, Rihayat (2018) Influence of selected treatment on tensile properties of short pineapple leaf fiber reinforced tapioca resin biopolymer composites. Journal of Polymers and the Environment, 26 (11). pp. 4271-4281. ISSN 1566-2543 (Print); 1572-8919 (Online). (Published)

Jamiluddin, Jaafar and Siregar, J. P. and Tezara, C. and M. H.M., Hamdan and S. M., Sapuan (2018) Characterisation of cassava biopolymers and the determination of their optimum processing temperatures. Plastics, Rubber and Composites, 47 (10). pp. 447-457. ISSN 1465-8011. (Published)

Jamlos, M. A. and Jamlos, M. F. and Azri, A. and Mohamad Shaiful, Abdul Karim and Wan Azani, Mustafa and Akkaraekthalin, Prayoot (2021) Properties and performance verification on magnetite polydimethylsiloxane graphene array microwave sensor. Polymers, 13 (19). pp. 1-12. ISSN 2073-4360. (Published)

Jarrah, H. T. and Mohtasebi, S. S and Ettefaghi, E. and Jaliliantabar, F. (2021) Experimental investigation of silver / water nanofluid heat transfer in car radiator. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). pp. 7743-7753. ISSN 2231-8380 (online). (Published)

Jasri, Mohamad (2016) A New Tool to Acquire Sheet Metal Cyclic Plasticity Data for Hardening Models. In: Conference Proceedings: International Conference On Materials Science, Metal & Manufacturing (M3 2016) , 18-19 January 2016 , Singapore. pp. 94-100.. ISSN 2251-1857

Jasri, Mohamad and Mohd Zaidi, Sidek (2019) Springback prediction using finite element simulation incorporated with hardening data acquired from cyclic loading tool. International Journal of Materials Forming and Machining Processes (IJMFMP), 6 (1). pp. 19-39. ISSN 2334-4571. (Published)

Javed, Omama and Abd Aziz, Radhiyah (2022) Review: Two-dimensional layered material based electrodes for lithium ion and sodium ion batteries. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 399-418., 882. ISSN 1876-1100 ISBN 978-981191576-5

Javed, Omama and Radhiyah, Abd Aziz (2022) Effect of graphene oxide loading on cobalt oxide performance as electrocatalyst for methanol oxidation reaction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 126..

Jayabharty, Mogan and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Parameter influence on mechanical properties of ABS; using FDM. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 68..

Jeevendran, Kananathan (2023) Mechanical behavior of fdm 3d printed coconut wood-filled pla. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Jefry, Dedi Efendi (2009) Valve timing study of a single cylinder motorcycle engine /. Faculty of Mechanical Engineering , UNIVERSITI MALAYSIA PAHANG .

Jessnor Arif, Mat Jizat and Ahmad Fakhri, Ab. Nasir and Anwar P. P., Abdul Majeed and Yuen, Edmund (2020) Effect of image compression using fast fourier transformation and discrete wavelet transformation on transfer learning wafer defect image classification. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (1). pp. 16-22. ISSN 2637-0883. (Published)

Jessnor Arif, Mat Jizat and Anwar, P. P. Abdul Majeed and Ahmad Fakhri, Ab. Nasir and Zahari, Taha and Yuen, Edmund and Lim, Shi Xuen (2022) Evaluation of the Transfer Learning Models in Wafer Defects Classification. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 873-881., 730. ISBN https://doi.org/10.1007/978-981-33-4597-3_78

Jie, Lim WeI and Sen, Teoh Poh and Normaniha, Abd Ghani (2021) Automatic control of color sorting and pick/place of a 6- dof robot arm. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Jihan, Zukhi and Fatanah Mohamad, Suhaimi and Mohd Zulfakar, Mazlan and Ummu Kulthum, Jamaludin and Normy, Razak and Mastura, Mohd Sopian (2020) The effects of insulin infusion protocol on the glycemic level of the intensive care patients. In: IFAC-PapersOnLine; 21st IFAC World Congress 2020 , 12-17 July 2020 , Berlin. pp. 15964-15969., 53 (2). ISSN 2405-8963

Johari, Bar Azwar (2010) Investigation of circular based micropump diffuser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Johari, N. A. and Juliawati, A. and Zanurin, A. and Mohamed, N. S. and Alang, N. A. and M. Zain, M. Z. (2022) Recent progress of self-healing coatings for magnesium alloys protection. Journal of Coatings Technology and Research, 19 (3). 757 -774. ISSN 1547-0091. (Published)

John Paul, Nadakkal and K., Kadirgama and Mahendran, Samykano and Saidur, R. and Pandey, A. K. and Mohan, R. V. (2022) An updated review on low-temperature nanocomposites with a special focus on thermal management in buildings. Energy Engineering, 119 (4). 1299 -1325. ISSN 0199-8595. (Published)

John Paul, Nadakkal and Kadirgama, Kumaran and Samykano, Mahendran (2022) Thermophysical characterization of paraffin/palmitic acid binary eutectic composite for thermal energy harvesting. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 66..

Jolhi, Brahim (2010) Design and fabrication of concentrated solar thermal (CST) system for solar cooker application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Juan, Pratama and Deni Fajar, Fitriyana and Rusiyanto, . and Siregar, J. P. and Wahyu, Caesarendra (2020) A low cost validation method of finite element analysis on a thin walled vertical pressure vessels. In: Journal of Physics: Conference Series; 8th Engineering International Conference 2019 , 16 August 2019 , Semarang, Indonesia. pp. 1-18., 1444 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Juliawati, Alias (2020) Role of aluminium on the microstructure and corrosion behaviour of magnesium prepared by powder metallurgy method. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 1-8. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Juliawati, Alias and Fatin Ayuni, Ramlan and Nurul Amiratul, Johari and Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Nasrul Azuan, Alang (2021) “Aloe-heal coat” smart self-healing coating for anti-corrosion of automotive components. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Juliawati, Alias and Mohamad Mazwan, Mahat and Mohd Akramin, Mohd Romlay (2010) Developments of aneurysm rupture prediction method using fracture mechanics analysis = pembangunan kaedah jangkaan pemecahan aneurisma menggunakan analisis mekanik rekahan. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Juliawati, Alias and Nur Azhani, Abd Razak (2013) Hydrogen Embrittlement Susceptibility of Pipeline Steel. Applied Mechanics and Materials, 315. pp. 820-824. ISSN 1662-7482. (Published)

Juliawati, Alias and Nurul Shuhada, Mohamed and M., Ishak and Zhou, Xiorong and Thompson, George E. (2018) The influence of hot forming on the microstructure and corrosion behaviour of AZ31B magnesium alloys. Indonesian Journal of Science & Technology, 3 (2). pp. 150-157. ISSN 2527-8045. (Published)

Juliawati, Alias and W. S., Wan Harun and Mas Ayu, Hassan (2019) A Review on the Preparation of Magnesium-Based Alloys Prepared by Powder Metallurgy and the Evolution of Microstructure and Mechanical Properties. Key Engineering Materials, 796. pp. 3-10. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Julie J., Mohamed and M. M., Noor (2008) The Effects of Different Calcination Parameters on CCTO Formation. In: Proceeding of Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2008) , March 8-10 2008 , Putra Palace, Perlis, Malaysia. pp. 336-340..

Junita, Mohd Said and Faiz, Mohd Turan and Norazlianie, Sazali (2023) Integrated Assessment of MIG Welding Parameters on Carbon Steel using RSM Optimisation. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 16-29. ISSN 2289-7895. (Published)

K

K., Kadirgama and M., Yogeswaran and S., Thiruchelvam and M. M., Rahman (2014) Mathematical Modeling for Surface Roughness When Milling Aisi 304 Stainless Steel. Jokull Journal, 65 (4). pp. 1-9. ISSN 0449-0576. (Published)

K., Kadirgama and M. M., Noor (2008) Cutting Force prediction model by FEA and RSM when machining Hastelloy C-2HS with 900 holder. Journal of Scientific & Industrial Research, 6 (67). pp. 421-427. ISSN 0022-4456. (Published)

K., Kadirgama and M. M., Noor (2008) Prediction of Tool Life by Statistic Method in End-milling Operation. Scientific Research and Essay , 3 (5). pp. 180-186. ISSN 1992-2248. (Published)

K., Kadirgama and M. M., Noor and K. V., Sharma (2011) Tool Life and Wear Mechanism when Machining Hastelloy C-22HS. Wear, 270 (3-4). pp. 258-268. ISSN 0043-1648. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and R., Daud (2008) Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network. Jourdan Journal of Mechanical and Industrial Engineering, 2 (4). ISSN 1995-6665. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and M. S. M., Sani (2009) Surface Roughness Analysis In End Milling With Response Ant Colony Optimization. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2010) Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material. International Journal of Mechanical and Materials Engineering, 1 (2). (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Experimental and Numerical Study of Cutting Force in End-Milling Operation Using Statistical Method. In: 12th Cirp Conference On Modelling Of Machining Operations , 7-8 May 2009 , San Sebastian (Spain). . (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Fourth Order Torque Prediction Model in End Milling. Journal of Applied Sciences, 9 (13). pp. 2431-2437. ISSN 1812-5654. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2009) Prediction Modelling Of Power And Torque In End-Milling. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509. (Published)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Importance of the Pre-Requisite Subject. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. and M. S. M., Sani (2008) Design A New Household Recycle Trash Bin. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

K., Kadirgama and M. M., Noor and N. M. Zuki, N. M. and M. R. M., Rejab (2008) Prediction Of Cutting Force By Numerical Solution And Statistic Method In End-Milling Operation. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

K., Kadirgama and M. M., Noor and R., Daud and M. R. M., Rejab (2008) Development of New Genetic Algorithm Software for Blow Mould Process. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Malaysia. . (Unpublished)

K., Kadirgama and M. M., Rahman and M. M., Noor and M. S. M., Sani (2010) Optimised Tool Life by Partial Swarm Optimisation. International Journal of Material Forming, 3 (1). pp. 479-482. (Published)

K., Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat (2018) Experimental investigation of nanoparticle mixture ratios on TiO2–SiO2 nanofluids heat transfer performance under turbulent flow. International Journal of Heat and Mass Transfer, 118. pp. 617-627. ISSN 0017-9310. (Published)

K., Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2016) Thermal Conductivity Enhancement of TiO2 Nanofluid in Water and Ethylene Glycol (EG) Mixture. Indian Journal of Pure & Applied Physics, 54. pp. 651-655. ISSN 0975-1041. (Published)

K., Abdul Hamid and Azmi, W. H. and R., Mamat and Sharma, K. V. (2019) Heat transfer performance of TiO2-SiO2 nanofluids in a tube with wire coil inserts. Applied Thermal Engineering, 152. pp. 275-286. ISSN 1359-4311. (Published)

K., Baarath and Muhammad Aizzat, Zakaria and Nurul Afiqah, Zainal (2019) An investigation on the effect of lateral motion on normal forces acting on each tires for nonholonomic electric vehicle: Experimental results. In: The 26th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks , 12-16 August 2019 , Gothenburg, Sweden. . (Unpublished)

K., Chopra and Pratik, Kumar Pathak and Mahendran, Samykano and Tyagi, V. V. and Pandey, A. K. (2019) Recent advancements in design of flat plate solar collectors. In: The International Scientific Forum (ISF2019) , 16-17 December 2019 , Melaka, Malaysia. pp. 1-8.. (Unpublished)

K., Farhana and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and M., Samykano and R., Saidur (2021) Analysis of efficiency enhancement of flat plate solar collector using crystal nano-cellulose (CNC) nanofluids. Sustainable Energy Technologies and Assessments, 45 (101049). pp. 1-16. ISSN 2213-1388. (Published)

K., Kadirgama (2009) Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material. In: International Conference on Recent Advances in Materials, Minerals & Environment , 1 hingga 3 Jun 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. .

K., Kadirgama (2017) Investigation of Chip and Surface Roughness when Milling AISI304 Stainless Steel. In: Engineering and Innovative Materials V. Trans Tech Publications Ltd, pp. 152-158. ISBN 9783038357704

K., Kadirgama (2008) Modelling Of Tool Life When Milling Nickel Base Alloys With Two Different Coated Carbide Insert. In: SAIAS Symposium , 14-16 September 2008 , Stellenbosch, South Africa. . (Unpublished)

K., Kadirgama (2008) Prediction of Torque in Milling by Response Surface Method and Neural Network. International Journal of Modelling and Simulation, 28 (4). (Published)

K., Kadirgama (2021) A comprehensive review on the application of nanofluids in the machining process. The International Journal of Advanced Manufacturing Technology, 115. pp. 2669-2681. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

K., Kadirgama and Adnan, M. Husein and Sharma, Korada Viswanatha and R. A., Bakar (2013) The Effect of Cross Sectional Area of Tube on Friction Factor and Heat Transfer Nanofluid Turbulent Flow. International Communications in Heat and Mass Transfer, 47. pp. 49-55. ISSN 0735-1933. (Published)

K., Kadirgama and D., Ramasamy and Kong, Chung Hwa (2017) Assessment of Alternative Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3591-3605. ISSN 1678-5878 (Print); 1806-3691 (Online). (Published)

K., Kadirgama and D., Ramasamy and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Analysis of thermal Conductivity for Cellulose Nanocrystal (CNC) based nanofluid. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-4.. (Unpublished)

K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2013) The Effect of Nanofluid Volume Concentration on Heat Transfer and Friction Factor inside a Horizontal Tube. Journal of Nanomaterials, 2013. pp. 1-12. ISSN 1687-4110 (print); 1687-4129 (online). (Published)

K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) Heat Transfer Enhancement Using Nanofluids in an Automotive Cooling System. International Communications in Heat and Mass Transfer, 53. pp. 195-202. ISSN 0735-1933. (Published)

K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) A Review of Forced Convection Heat Transfer Enhancement and Hydrodynamic Characteristics of a Nanofluid. Renewable and Sustainable Energy Reviews, 29. pp. 734-743. ISSN 1364-0321. (Published)

K., Kadirgama and Kaaliarasan, Ramachandran and D., Ramasamy and W. H., Azmi and Mahendran, Samykano (2018) Elucidation and model development of thermal conductivity analysis for cellulose nanocrystal (CNC) based nanofluid. In: 26th Annual international conference on composites or nano engineering , 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

K., Kadirgama and Keeran, Anamalai and Ramachandran, Kaaliarasan and D., Ramasamy and Samykano, Mahendran and Kottasamy, A. and Lingenthiran, Samylingam and M. M., Rahman (2018) Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2061-2076. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

K., Kadirgama and L., Samylingam and Aslfattahi, Navid and M., Samykano and D., Ramasamy and R., Saidur (2021) Experimental Investigation on the Optical and Stability of Aqueous Ethylene Glycol/Mxene as a Promising Nanofluid for Solar Energy Harvesting. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-10., 1062 (012022). ISSN 1757-8981 (Print); 1757-899X (Online)

K., Kadirgama and M., Yogeswaran and S. , Thiruchelvam and M. M., Rahman (2014) Prediction of Grinding Machinability when Grind P20 Tool Steel Using Water Based Zno Nano-Coolant. Jokull Journal, 66 (5). pp. 1-15. ISSN 0449-0576. (Published)

K., Kadirgama and M. M., Noor and B., Mohammad and H. H., Habeeb (2010) Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS. Advanced Materials Research, 83-86 . pp. 295-302. ISSN 1022-6680. (Published)

K., Kadirgama and M. M., Noor and D., Ramasamy and M. R. M., Rejab (2008) Design and Simulate Mixing of Compressed Natural Gas with Air in a Mixing Device. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis, Malaysia. .

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2009) Surface Roughness Prediction Model of 6061-T6 Aluminium Alloy Machining Using Statistical Method. European Journal of Scientific Research, 25 (2). pp. 250-256. ISSN ISSN 1450-216X. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and N. M. Zuki, N. M. and M. R. M., Rejab and B., Mohammad (2008) Design and development of blow mould using machining optimization parameters. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and W. S., Wan Harun (2009) Finite Element Analysis and Statistical Method to Determine Temperature Distribution on Cutting Tool in End-Milling. European Journal of Scientific Research, 30 (3). pp. 451-463. ISSN 1450-216X. (Published)

K., Kadirgama and M. M., Rahman and Ahmad Rasdan, Ismail and R. A., Bakar (2011) Finite Element Analysis of Hastelloy C-22HS in End Milling. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 37-46. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

K., Kadirgama and M. M., Rahman and Bashir, Mohamed and R. A., Bakar and Ahmad Rasdan, Ismail (2012) Development of Temperature Statistical Model when Machining of Aerospace Alloy Materials. Thermal Science InternationalnScientific Journal, 18 (1). pp. 269-282. ISSN 2334-7163. (Published)

K., Kadirgama and R. A., Bakar and Hussein, Adnan M. (2014) Study of Forced Convection Nanofluid Heat Transfer in the Automotive Cooling System. Case Studies in Thermal Engineering, 2. pp. 50-61. ISSN 2214-157X. (Published)

K., Kadirgama and W. S., Wan Harun and Tarlochan, F. and Mahendran, Samykano and D., Ramasamy and Mohd Zaidi, Azir and Mehboob, H. (2018) Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material. The International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 495-510. ISSN 0268-3768. (Published)

K., Kadirgama and Zahari, Taha and Abdul Rahim, Ismail and Azrul, Hisham and A., Zulkifli and Nasrul Hadi, Johari and Zulfika, Anuar (2013) Effect of knee pad on kicking a ball and gait analysis. Movement, Health & Exercise, 2 (1). pp. 41-46. ISSN 2289-9510. (Published)

K., Mohanesen and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman (2019) Flame ionization testing in an internal combustion engine to measure the speed of the flame for gaseous fuels. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012075). ISSN 1757-899X

K., Ramachandran and K., Kadirgama and D., Ramasamy and Azmi, W. H. and F. , Tarlochan (2017) Investigation on effective thermal conductivity and relative viscosity of cellulose nanocrystal as a nanofluidic thermal transport through a combined experimental – Statistical approach by using Response Surface Methodology. Applied Thermal Engineering, 122. pp. 473-483. ISSN 1359-4311. (Published)

K., Sudhakar and Soni, Ruma Arora (2017) Carbon sequestration through solar bioreactors: industrial strategies. In: Carbon Utilization. Green Energy and Technology . Springer, Singapore, pp. 143-155. ISBN 978-981-10-3352-0

K. A., Azuddin and A. K., Junoh and Zamri, Mohamed and M. T., Abdul Rahman (2020) A comparative study on interior acoustic comfort level of compact cars using data mining approach. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). pp. 7695-7708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

K. A., Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat (2017) Improved Thermal Conductivity of Tio2-Sio2 Hybrid Nanofluid in Ethylene Glycol and Water Mixture. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012067). ISSN 1757-8981 (Print); 1757-899X (Online)

K. A., Hamid and Azmi, W. H. and R., Mamat and K. V., Sharma (2016) Experimental Investigation on Heat Transfer Performance of TiO2 Nanofluids in Water-Ethylene Glycol Mixture. International Communications in Heat and Mass Transfer, 73. pp. 16-24. ISSN 0735-1933. (Published)

K. A., Hamid and W. H., Azmi and M. F., Nabil and R., Mamat (2017) Heat transfer augmentation of mixture ratio tio2 to sio2 in hybrid nanofluid. In: 5th International Conference on Advances in Mechanical Engineering 2017 , 16-18 Ogos 2017 , Universiti Teknologi Mara (UiTM). pp. 1-13., 13 (2).

K. A., Masri and Nur Syafiqah, S. M. Z. and M. A., Seman and P. J., Ramadhansyah and H., Yaacob and N., Mashros (2021) A review on nanomaterials as additive in asphalt binder. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012055). ISSN 1755-1315

K. H., Khalib and Nur Hairunnisa, Kamarudin and M. F. F., Ab Rashid (2019) Evaluation of rank-based crossovers to optimize real-life assembly line balancing with resource constraint. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (12014). ISSN 1757-899X

K. H., Koo and M. R. R., Chand and Hassan, Ibrahim and Azizuddin, Abd Aziz and F., Basrawi (2015) Theoretical Analysis on the Effect of Operation Strategies on the Environmental Performance of Micro Gas Turbine Trigeneration System in Tropical Region. Journal of Mechanical Engineering and Automation, 5 (3A). pp. 19-25. ISSN 2163-2405 (Print); 2163-2413 (Online). (Published)

K. H., Tan and L., Samylingam and Aslfattahi, Navid and R., Saidur and K., Kadirgama (2021) Optical and conductivity studies of polyvinyl alcohol-MXene (PVA-MXene) nanocomposite thin films for electronic applications. Optics & Laser Technology, 36 (106772). pp. 1-12. ISSN 0030-3992. (Published)

K. I., Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2016) The Effect of Shielding Gas Flow Rate on Fiber Laser Welding of Boron Steel. In: 3rd TMAC Symposium 2016 , 28 Feb - 1 March 2016 , UTEM Melaka. pp. 1-5.. (Unpublished)

K. Kalyani, Radha and S.Naga, Sarada and K., Rajagopal (2012) Development of a Chest Freezer-Optimum Design of an Evaporator Coil. International Journal of Automotive and Mechanical Engineering (IJAME), 5, . pp. 597-611. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

K. M., Ahmad and Mohd Rashidi, Maarof and M., Ishak and M. S., Huzairi (2016) Microstructure and Mechanical Properties of Austenitic Compacted Cast Iron with Additive Manganese. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00009). ISSN 2261-236X

K. V., Sharma and Azmi, W. H. and Kamal, Subhash and Sarma, P. K. and Vijayalakshmi, Bathula (2016) Theoretical Analysis of Heat Transfer and Friction Factor for Turbulent Flow of Nanofluids through Pipes. The Canadian Journal of Chemical Engineering, 94 (3). pp. 565-575. ISSN 1939-019X. (Published)

K. V., Sharma and Azmi, W. H. and Kamal, Subhash and Suhaimi, Hasan (2016) Numerical Analysis of Experimental Turbulent Forced Convection Heat Transfer for Nanofluid Flow in a Tube. Applied Mechanics and Materials, 819. pp. 132-141. ISSN 1662-7482. (Published)

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and M. M., Rahman and M. M., Noor and K., Kadirgama (2010) Experimental Investigations Of Oxygen Stripping from Feed Water in a Spray and Tray Type De-Aerator. International Journal of Automotive and Mechanical Engineering (IJAME), 1. pp. 46-65. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and V., Dharma Rao and T., Subramanyam (2010) Oxygen Stripping in Deaerator Feed Water: Condensation on Spray Droplets. Heat and Mass Transfer, 46 (6). pp. 665-673. ISSN 0947-7411. (Published)

K. Y., Kor and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Hassan, Ibrahim and M., Mahendran (2014) Simulation Model to Assess Electrical Power Generation from Tidal Basin in Coastal Area Malaysia. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .

Kaaliarasan, Ramachandran (2017) Cellulose nanocrystals as a dispersant in thermal transport fluid : investigation of heat transfer analysis in automotive cooling system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kadirgama, Kumaran).

Kaaliarasan, Ramachandran and Balakumaran, Yeesvaran and K., Kadirgama and D., Ramasamy and S. A., Che Ghani and Keeran, Anamalai (2016) State of Art of Cooling Method for Dry Machining. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90.

Kadarohman, Asep and Khoerunnisa, Fitri and Syazwana, Sapee and Sardjono, Ratnaningsih Eko and Izuan, Izzudin and Hendrawan, . and R., Mamat and Ahmad Fitri, Yusop and Erdiwansyah, . and Yusaf, Talal (2021) The effect of oxygenated turpentine oil additive in diesel fuel on the performance and emission characteristics in one-cylinder di engines. Designs, 5 (4). pp. 1-17. ISSN 2411-9660. (Published)

Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. and Matsukawa, Yoshiaki (2017) Reliability assessment of generating systems with wind power penetration via BPSO. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1248-1254. ISSN 2088-5334. (Published)

Kadhim, Saleem Khalefa and Ali, Sinan Abdulghafar and Razak, N. F. D. and M. S. M., Sani (2021) Vertical vibrations effect on forced convection heat transfer from a longitudinal finned tube. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-13., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Kadirgama, Ganesaan and Muhammad Izdihar, Razman and Devarajan, Ramasamy and K., Kadirgama and Farhana, Kaniz (2023) Graphene as an alternative additive in automotive cooling system. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 13-35.. ISSN 2195-4356 ISBN 978-981191456-0

Kadirgama, Kumaran Hybrid nanoparticles with ethylene glycol for car radiator application. , [Research Report: Research Report] (Unpublished)

Kadirgama, Kumaran Thermal management of vehicle radiator by nanofluid. , [Research Report: Research Report] (Unpublished)

Kadirgama, Kumaran and Awad, Omar I. and Mohammed, M.N and Tao, Hai and Bash, Ali A. H. Karah (2023) Sustainable green energy management : Optimizing scheduling of multi-energy systems considered energy cost and emission using attractive repulsive shuffled frog-leaping. Sustainability, 15 (10755). pp. 1-19. ISSN 2071-1050. (Published)

Kadirgama, Kumaran and Chelian, Ilen and Rahman, Md Mustafizur and Devarajan, Ramasamy and Mahendran, Samykano and Samylingam, Lingenthiran and Rahman, Saidur (2021) Mxene enrich concentration solar power (CSP) coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun and Chin, S. Y. and Khan, Maksudur R. and Yun Hin, Taufiq-Yap and Cheng, C. K. (2015) Syngas Production from Glycerol-dry(CO2) Reforming Over La-promoted Ni/Al2O3 Catalyst. Renewable Energy, 74 (Feb.). pp. 441-447. ISSN 0960-1481. (Published)

Kai, Gavin Lim Jiann and Ahmad Fakhri, Ab Nasir and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Li, Lim Thai (2022) The classification of impact signal of 6 DOF cobot by means of machine learning model. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. 553- 560., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Optical absorptivity and thermal conductivity analysis of silver nanoparticle dispersed salt hydrate PCM. In: 2022 IEEE International Conference on Power and Energy : Advancement in Power and Energy Systems towards Sustainable and Resilient Energy Supply, PECon 2022Pages 203 - 2082022; 9th IEEE International Conference on Power and Energy, PECon 2022 , 5 - 6 December 2022 , Langkawi, Kedah. pp. 328-332. (185592). ISBN 978-166540990-2

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Yadav, Aman and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Graphene–silver hybrid nanoparticle based organic phase change materials for enhanced thermal energy storage. Sustainability (Switzerland), 14 (13240). pp. 1-16. ISSN 2071-1050. (Published)

Kamal, Ariffin (2011) Study of wear mechanism in the contact between table liner and roller of vertical roller mills. Masters thesis, Saitama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Kamal, M. and M. M., Rahman (2014) Fatigue Life Estimation Models: A State of the Art. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1599-1608. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kamal, M. and M. M., Rahman (2014) Finite Element-Based Fatigue Behaviour of Springs in Automobile Suspension. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1910-1919. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kamal, Minhas and M. M., Rahman (2018) Advances in fatigue life modeling: A review. Renewable and Sustainable Energy Reviews, 82 (1). pp. 940-949. ISSN 1364-0321. (Published)

Kamarulzaman, Mahmad Khairai and Muhammad Nubli, Abdul Wahab and Sutarto, Auditya Purwandini (2021) Heart Rate Variability (HRV) as a Physiological Marker of Stress Among Electronics Assembly Line Workers. In: Human-Centered Technology for a Better Tomorrow: Proceedings of HUMENS 2021 , 22 February 2020 , Pekan, Pahang, Malaysia. pp. 3-14.. ISBN 978-981-16-4115-2

Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2016) Development of a Complete Single Jet Common Rail Injection System Gas Dynamic Model for Hydrogen Fueled Engine with Port Injection Feeding System. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (6). pp. 976-984. (Published)

Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2014) An Integrated Model for Predicting Engine Friction Losses in Internal Combustion Engines. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1695-1708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kananathan, J. and Mahendran, Samykano and K., Kadirgama and Ramasamy, D. and Rahman, M. M (2021) Statistical model for impact and energy absorption of 3D printed coconut Wood-PLA. Energy Engineering, 118 (5). pp. 1305-1315. ISSN 0199-8595. (Published)

Kananathan, Jeeven and Samykano, Mahendran and Kadirgama, K. and Devarajan, Ramasamy and Rahman, Md Mustafizur Comprehensive investigation and prediction model for mechanical properties of coconut wood–polylactic acid composites filaments for FDM 3D printing. European Journal of Wood and Wood Products, 80. pp. 75-100. ISSN 0018-3768(print); 1436-736X(online). (Published)

Kananathan, Jeeven and Samykano, Mahendran and Sudhakar, K. and Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and Manoj Kumar, Nallapaneni and W. K., Ngui and K., Kadirgama and Azmi, W. H. and W. S., Wan Harun (2018) Nanofluid as coolant for grinding process: An overview. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-16., 342 (012078). ISSN 1757-8981 (Print), 1757-899X (Online)

Kaniz, Farhana and Kumaran, Kadirgama and Mahamude, Abu Shadate Faisal and Mushfika, Tasnim Mica (2022) Energy consumption, environmental impact, and implementation of renewable energy resources in global textile industries: an overview towards circularity and sustainability. Materials Circular Economy, 4 (15). ISSN 2524-8154. (Published)

Karthick, A. and Murugavel, K. Kalidasa and Ghosh, Aritra and Sudhakar, K. and Ramanan, P. (2020) Investigation of a binary eutectic mixture of phase change material for building integrated photovoltaic (BIPV) system. Solar Energy Materials and Solar Cells, 207 (110360). pp. 1-20. ISSN 0927-0248. (Published)

Kartina, Johan and Faiz, Mohd Turan and Wan Nurul Syahirah, Wan Lanang (2017) Perception of employees of industries in Malaysia on corporate sustainability in affecting customer confidence and loyalty: a case study. In: 3rd and 4th International Engineering Research and Innovation Symposium (IRIS2017) , 6-7 May 2017 , Melaka; Malaysia. pp. 1-12., 226 (1). ISSN 17578981

Kashif, Irshad and Khairul, Habib and F., Basrawi and Nagarajan, Thirumalaiswamy and R., Saidur and Bidyut, Baran Saha (2015) Thermal Comfort Study of a Building Equipped with Thermoelectric Air Duct System for Tropical Climate. Applied Thermal Engineering, 91. pp. 1141-1155. ISSN 1359-4311. (Published)

Kashif, Irshad and Khairul, Habib and F., Basrawi and Saha, Bidyut Baran (2017) Study of a Thermoelectric Air Duct System Assisted by Photovoltaic Wall for Space Cooling In Tropical Climate. Energy, 119. pp. 504-522. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Katanoda, Hiroshi and Mohd Hazwan, Yusof and Morita, Hiromitsu (2015) Energy Separation Mechanism in Unconfined Laminar Compressible Vortex. International Journal of Refrigeration, 59. pp. 115-123. ISSN 0140-7007. (Published)

Kaur, Jesbains and Nurfatihah, Jamil and Syed, Shahabuddin and Pandey, A. K. and Saidur, R. and Hagos, F. Y. and Singh, Baljit (2019) The Effects of Graphene on Microstructural and Thermal Properties of Calcium Chloride Hexahydrate PCM. In: IEEE International Conference and Utility Exhibition on Green Energy for Sustainable Development (ICUE 2019) , 24-26 October 2018 , Phuket, Thailand. pp. 1-6.. ISBN 978-9-7482-5799-0

Kavin, J. and Azam, M. and Ahmad, A. H. and Shayfull, Z. and Mohd Rashidi, Maarof (2018) Effect of degassing addition on the corrosion of nickel aluminum bronze. In: AIP Conference Proceedings: Green Design And Manufacture: Advanced And Emerging Applications: Proceedings of the 4th International Conference on Green Design and Manufacture 2018 , 29-30 April 2018 , Ho Chi Minh, Vietnam. pp. 1-7., 2030 (020147). ISSN 0094-243X ISBN 978-0-7354-1752-6

Kavin, J. and Mohd Rashidi, Maarof and Ahmad, A. H. (2019) Investigation of nickel aluminium bronze castings properties by degassing agent technique. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012037). ISSN 1757-899X

Kavin, Klinsman Konsil and Norazlianie, Sazali and Kumaran, Kadirgama and Norazwina, Zainol (2023) Analysis on the Performance of Designed Fluidized Bed Dryer for Drying Coffee Beans. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 99-109. ISSN 2462-1943. (Published)

Kavinmugil, Kalaiselvan (2022) Degassing effect on nickel aluminum bronze alloy castings. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Maarof, Mohd Rashidi).

Kazem, Shahverdi and Gholamhassan, Najafi and Rizalman, Mamat and Mohd Fairusham, Ghazali and A.S., EI-Shafy and Mohamed, Mousa (2023) Introducing a design procedure for Archimedes Screw Turbine based on optimization algorithm. Energy for Sustainable Development, 72. pp. 162-172. ISSN 0973-0826. (Published)

Keeran, Anamalai (2019) Development and analysis of Ethylene Glycol/Nanocellulose based Nanofluid Coolant for machining SUS 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Keng, Ngui Wai and Mohd Salman, Leong and Mohd Ibrahim, Shapiai and Hee, Lim Meng (2023) Blade fault localization with the use of vibration signals through artificial neural network: a data-driven approach. Pertanika Journal of Science and Technology, 31 (1). pp. 51-68. ISSN 0128-7680. (Published)

Kesavarma, Seluraju (2022) Investigation of mechanical behavior and properties prediction modelling of copper-filled filament for 3d printing. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Kesavarma, Seluraju and E. H., Lee and M., Samykano and K., Kadirgama and M. M., Rahman and A. G. N., Sofiah (2020) Flextural properties of 3D printed Copper-Filler Polylactic Acid (Cu-PLA). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012051). ISSN 1757-8981 (Print), 1757-899X (Online)

Kettner, M. and Dechent, S. and Hofmann, M. and Huber, E. and Arruga, H. and R., Mamat and G., Najafi (2016) Investigating the Influence of Water Injection on the Emissions of a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1863-1881. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi and Fitriyana, Deni Fajar and Widodo, Rahmat Doni and Ismail, Rifky and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Nur Hidayah, Ismail (2023) A Study on Characteristics of Brake Pad Composite Materials by Varying the Composition of Epoxy, Rice Husk, Al2O3, and Fe2O3. Automotive Experiences, 6 (2). pp. 303-319. ISSN 2615-6202. (Published)

Khaider, Abu Bakar (2009) Effect of nozzle angle on jet impingement cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairatul Ainal, Abdul Karim (2009) UMP dapat robot industri Perodua. Kosmo .

Khairi, Khalib (2008) Microcontroller based SMPS protection. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairil Anuar, Khairi and Mohd Faizal, Jamlos and Surentiran, Padmanathan and Mohd Aminudin, Jamlos and Muammar, Mohamad Isa (2019) Low insertion loss of surface mount device low pass filter at 700 MHz. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 382-388. ISSN 2302-9285. (Published)

Khairil Ashraff, Ab Rahim and Zainah, Md. Zain and Nurfadzillah, Harun and Maziyah, Mat Noh (2016) Hull Design for ROV with Four Thrusters (X4-ROV). In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 157-164..

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Falina, Shaili and Mohd, Syamsul (2022) A comparative modelling study of new robust packaging technology 1mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Shaili Falina, Mohd Sukri and Mohd Nasyriq, Syamsul (2022) A comparative modelling study of new robust packaging technology 1 mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khairul Aizat, Abdul Rahim (2010) One-dimensional simulation of a 4-stroke SI engine employing novel cylinder head concept : intake and exhaust flow investigation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Mat Salim (2008) Implementation of integral control state feedback controller for coupled tank liquid level system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Mohd Yakop (2008) Automatic pet feeder with client / server application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Asraf, Mazzlan (2009) A preliminary design of durian peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azmi, Mohd Mawardzi (2012) Investigation of machining performance of the coated carbide cutting tools with murakami surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azmi, Mohd Yusoff (2010) Active sway control of a gantry crane system using LQR controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Azmil, Adzmi (2008) Motor speed controller using fuzzy logic method for PCB drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Ihsan, Yaakob and M., Ishak and M. H., Aiman and Siti Rabiatull Aisha, Idris (2018) Characterization of Heat-Treated Gas Metal Arc-Welded Boron Steel Sheets. The International Journal of Advanced Manufacturing Technology, 94 (1-4). pp. 827-834. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2018) The effect of argon shielding gas flow rate on welded 22MNBS boron steel using low power fiber laser. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Cham, pp. 39-48. ISBN 978-981-10-9040-0

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2017) The effect of pulse welding parameters on weld geometry of boron steel using low power fibre laser. Journal of Mechanical Engineering and Sciences (JMES), 11 (3). pp. 2895-2905. ISSN 2289-4659 (Print); 2231-8380 (Online). (Published)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris and Aiman, Mohd Halil and Nur Zalikha, Khalil (2017) Hardness Variation of Welded Boron Steel Using Continuous Wave (CW) and Pulse Wave (PW) Mode of Fiber Laser. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-5., 238 (012007). ISSN 1757-899X

Khairul Muzafar, Ahmad (2017) Modification of austenitic cast iron (Ni-resist) with high manganese content by using heat treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Maarof).

Khairul Ridhwan, Zainudin (2010) Thermodynamic analysis of ground source heat pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairulafizal, Sultan Ali and Mohd Nadzeri, Omar and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan (2022) A Study on the Wear Resistance and Lubrication Properties of Mixed Engine Oils. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 95-107.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Khairunisa, Mohd Kadir (2013) Design reed controller for MIDI auto-saxophone. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khalaf I., Hamada and M. M., Rahman and A. Rashid, A. Aziz (2012) Time-averaged Heat Transfer Correlation for Direct Injection Hydrogen Fueled Engine. International Journal of Hydrogen Energy, 37. pp. 19146-19157. ISSN 0360-3199. (Published)

Khalaf Ibrahim, Hamada (2012) A study of the heat transfer in hydrogen fueled internal combustion engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Md. Mustafizur).

Khalid, N. S. and Rahim, M. R. and Hassan, M. F. (2022) Sensitivity identification of low-frequency cantilever fibre bragg grating accelerometer using cascade-forward backpropagation neural network. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9419-9432. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Khalid, Saifuddin and Zakaria, Irnie and W. H., Azmi and Mohamed, W. A. N. W. (2021) Thermal–electrical–hydraulic properties of Al2O3–SiO2 hybrid nanofluids for advanced PEM fuel cell thermal management. Journal of Thermal Analysis and Calorimetry, 143 (2). pp. 1555-1567. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Khalifaturrahim, Ab Rahman (2013) Experimental study of alternative fuel performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Khaliswaran, Keresnan (2012) Development of user interface for vibration measurement. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khamisa, Abdul Hamid and Wan Azmi, Wan Hamzah and Mohd Yusof, Taib and Mohd Farid, Ismail and Anwar Ilmar, Ramadhan (2022) Rheological properties of TiO2/POE nanolubricant for automotive air conditioning system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (1). pp. 10-22. ISSN 2289-7879. (Published)

Khamisah, Abdul Hamid (2016) Experimental investigation on forced convection heat transfer of water - ethylene glycol based TIO2 nanofluid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khamisah, Abdul Hamid (2019) Forced convection heat transfer performance of TiO2-SiO2 nanofluids with wire coil inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khamisah, Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat and Sharma, K. V. (2018) Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids. International Journal of Heat and Mass Transfer, 116. pp. 1143-1152. ISSN 0017-9310. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2014) Heat Transfer Performance of Titanium Oxide in Ethylene Glycol Based Nanofluids under Transition Flow. Applied Mechanics and Materials, 660. pp. 684-688. ISSN 1662-7482. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2014) Thermal Conductivity Enhancement of Aluminium Oxide Nanofluid in Ethylene Glycol. Applied Mechanics and Materials, 660. pp. 730-734. ISSN 1662-7482. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri and G., Najafi (2015) Effect of Titanium Oxide Nanofluid Concentration on Pressure Drop. Journal of Engineering and Applied Sciences, 10 (17). pp. 7815-7820. ISSN 1819-6608. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri and G., Najafi (2015) Viscosity Of AL2O3 Nanofluid in Different Base Mixture Ratio. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Khan, Md. Ashikur Rahman and M. M., Rahman (2013) Development of Regression Equation for Surface Finish and Analysis of Surface Integrity in EDM. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 7 (3). pp. 178-183. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman (2017) Surface Characteristics of Ti-5Al-2.5Sn in Electrical Discharge Machining Using Negative Polarity of Electrode. The International Journal of Advanced Manufacturing Technology, 92 (1-4). pp. 1-13. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2013) Artificial Intelligent Approach for Machining Titanium Alloy in a Nonconventional Process. International Journal of Mathematical, Computational, Physical and Quantum Engineering, 7 (11). pp. 1122-1127. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1782-1792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2015) An Experimental Investigation on Surface Finish in Die-Sinking EDM Of Ti-5Al-2.5Sn. The International Journal of Advanced Manufacturing Technology, 77 (9). pp. 1727-1740. ISSN 0268-3768. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Neural Network Modeling and Analysis for Surface Characteristics in Electrical Discharge Machining. Procedia Engineering, 90. pp. 631-636. ISSN 1877-7058. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and R. A., Bakar (2011) Artificial Intelligence Model to Predict Surface Roughness of Ti-15-3 Alloy in EDM Process. World Academy of Science, Engineering and Technology, 74. ISSN 2010-3778. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and Salehina, Zayed Us and Rahman, Md. Saifur (2016) Optimal Set-up and Surface Finish Characteristics in Electrical Discharge Machining on Ti-5al-2.5sn using Graphite. Perspectives in Science, 8. pp. 440-443. ISSN 2213-0209. (Published)

Khan, Nida and Sudhakar, K. and Rizalman, Mamat (2023) Biocrude potential assessment of macroalgae for sustainable biofuel production. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 145 -156.. ISSN 2195-4356 ISBN 978-981191456-0

Khan, Nida and Sudhakar, Kumarasamy and Rizalman, Mamat (2023) Seaweed farming : A perspectives of genetic engineering and nano-technology application. Heliyon, 9 (e15168). pp. 1-13. ISSN 2405-8440. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2023) Building integrated photovoltaics powered electric vehicle charging with energy storage for residential building: Design, simulation, and assessment. Journal of Energy Storage, 63 (107050). ISSN 2352-152X. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2023) Comparison of mono and bifacial modules for building integration and electric vehicle charging: A case study in Sweden. Energy Conversion and Management: X, 20 (100420). ISSN 2590-1745. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2022) Techno-Environmental Analysis of Facade Integrated Photovoltaics and Electric Vehicle Charging for University Building. Mathematical Problems in Engineering, 2022 (7186009). ISSN 1024-123X (print); 1563-5147 (online). (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof and Wan Azmi, Wan Hamzah and Ali, Hafiz Muhammad (2023) Roof integrated photovoltaic for electric vehicle charging towards net zero residential buildings in Australia. Energy for Sustainable Development, 73. pp. 340-354. ISSN 0973-0826. (Published)

Khan, Sanjay and Sudhakar, Kumarasamy and Mohd Hazwan, Yusof and Sundaram, Senthilarasu (2024) Review of building integrated photovoltaics system for electric vehicle charging. The Chemical Record, 24 (3). pp. 1-29. ISSN 1528-0691. (Published)

Khilji, Irshad Ahamad and Pathak, Sunil and Siti Nadiah, Mohd Saffe and Biswas, Shatarupa and Singh, Yogesh (2021) Opportunities and ehallenges in Nanoparticles Formation by Electrical Discharge Machining. In: Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 203-210. ISBN 978-981-15-7711-6

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil A review on an innovative approach for efficient nanoparticles synthesis by electrical discharge machining. In: NCON-PGR 2020 , Nov 2020 , Universiti Malaysia Pahang. pp. 1-10., 13 (969). ISBN 978-967-2831-35-8

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Chilakamarry, Chaitanya Reddy and Amiril Sahab, Abdul Sani and Reddy, Venugopal Jayarama (2022) Facile manufacture of oxide-free Cu particles coated with oleic acid by electrical discharge machining. Micromachines, 13 (6). pp. 1-10. ISSN 2072-666X. (Published)

Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Ţălu, Ştefan and Kulesza, Slawomir and Bramowicz, Miroslaw and Venugopal Jayarama, Reddy (2022) Titanium alloy particles formation in electrical discharge machining and fractal analysis. The Journal of The Minerals, Metals & Materials Society (TMS), 74. pp. 448-455. ISSN 1543-1851. (Published)

Khir, Hazim and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad, Shakeel Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2022) Recent advancements and challenges in flexible low temperature dye sensitised solar cells. Sustainable Energy Technologies and Assessments, 53 (102745). pp. 1-23. ISSN 2213-1388. (Published)

Khodabakhshi, F. and Marzbanrad, B. and L. H., Shah and Jahed, H. and Gerlich, A. P. (2017) Friction-Stir Processing of a Cold Sprayed AA7075 Coating Layer on the AZ31B Substrate: Structural Homogeneity, Microstructures and Hardness. Surface and Coatings Technology, 331. pp. 116-128. ISSN 0257-8972. (Published)

Khodabakhshi, Farzad and L. H., Shah and Gerlich, Adrian (2019) Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: novel beam-wobbling technique, processing parameters, and metallurgical characterization. Optics & Laser Technology, 112. pp. 349-362. ISSN 0030-3992. (Published)

Khoo, Jun Li and Radhiyah, Abd Aziz (2021) Callophyllum Inophyllum shell derived of activated carbon for additive of machining lubricant. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1868-1872., 48 (6). ISSN 2214-7853

Khor, Huoy Thing (2007) Home weather monitoring system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Kiethson, Branden Adems and Mohd Khairuddin, Ismail and Anwar P. P., Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Artificial intelligence approach for fire monitoring and warning system design. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 58-63. ISSN 2637-0883. (Published)

Kiran, Pandian and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Muhammad Amirul, Abdullah and Ahmad Fakhri, Ab. Nasir and Wan Hasbullah, Mohd Isa (2023) Sign language recognition using deep learning through LSTM and CNN. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 67-71. ISSN 2637-0883. (Published)

Kirpichnikova, I.M. and Sudhakar, K. and Makhsumov, I.B. and Martyanov, A.S. and ShanmugaPriya, S. (2022) Thermal model of a photovoltaic module with heat-protective film. Case Studies in Thermal Engineering, 30. pp. 1-10. ISSN 2214-157X. (Published)

Kit, Tam Jun and Sarah ‘Atifah, Saruchi and Nurhaffizah, Hassan and Nor Aziyatul, Izni (2023) Cyclist fall detection system via the internet of things (IoT). International Journal of Computing and Digital Systems, 13 (1). pp. 1025-1033. ISSN 2210-142X. (Published)

Kobayashi, Ikkei and Kuroda, Jumpei and Uchino, Daigo and Ogawa, Kazuki and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Peeie, Mohamad Heerwan and Narita, Takayoshi and Kato, Hideaki (2023) Research on yaw moment control system for race cars using drive and brake torques. Vehicles, 5 (2). pp. 1-20. ISSN 2624-8921. (Published)

Kobayashi, Ikkei and Ogawa, Kazuki and Uchino, Daigo and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki A basic study on hybrid systems for small race car to improve dynamic performance using lap time simulation. Actuators, 11 (7). pp. 1-17. ISSN 2076-0825. (Published)

Koh, Kelvin (2009) Analysis of heat gain against cooling capacity at occupied building. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Koh, Tze Mian (2014) Study on the relationship between head loss and the characteristics of piping system. Faculty of Civil Engineering and Earth Resources, UNIVERSITI MALAYSIA PAHANG .

Kong, Chung Hwa and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman and Samykano, Mahendran (2017) Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01055 ). ISSN 2261-236X

Kong, Deyi (2013) CFD simulation of particle mixing in a fluidized bed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kong, Nurziana and Khalil, Nur Zalikha and Fricke, Holger (2021) Moisture absorption behavior and adhesion properties of GNP/epoxy nanocomposite adhesives. Polymers, 13 (11). pp. 1-17. ISSN 2073-4360. (Published)

Koochak, Mostafa and Gharehghani, Ayatallah and Shahbakhti, Mahdi (2013) Experimental and Simulation Study of In-Cylinder Strategies For Regeneration of Lean Nitrogen Oxide Traps In A High-Speed Direct-Injection Diesel Engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (12 ). pp. 1661-1673. ISSN 2041-2991. (Published)

Korada, Viswanatha Sharma and Azmi, W. H. and R. A., Bakar and M. M., Noor and K., Kadirgama and D. M. R., Prasad and Mohd Irza Pairuz, Zamri (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. Project Report. Universiti Malaysia Pahang. (Unpublished)

Kottasamy, A. and K., Kadirgama and Keeran, Annamalai and Mohanesan, K. and D., Ramasamy and M. M., Rahman and M. M., Noor and M. Razali, Hanipah (2017) Titanium Oxide with Nanocoolant for Heat Exchanger Application. Journal of Mechanical Engineering and Sciences (JMES) , 11 (3). pp. 2834-2844. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Kottasamy, Arvind and Samykano, M. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Pandey, Adarsh Kumar (2021) Optimization of impact energy of copper-polylactic acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). 78 -90. ISSN 2289-7879. (Published)

Krishna Kishore, Dokala Janandra and Mohd Rusllim, Mohamed and Sudhakar, Kumarasamy and Peddakapu, kurukuri and D., Anantha koteswara Rao (2022) A hybrid PEO based maximum power point tracking controller for pv system under partial shading conditions. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 63..

Krishnan Sasidharan, Suseel Jai and KrishnaMurthy, Nagarajan Parasumanna and R., Mamat and Sathyamurthy, R. (2018) Synthesis, characterisation and thermo-physical investigations on magnesia nanoparticles dispersed in ethylene glycol–DI water (50:50). IET Micro & Nano Letters, 13 (3). pp. 335-340. ISSN 1750-0443. (Published)

Kumar, Nallapaneni Manoj and Mahendran, Samykano and Karthick, A. (2021) Energy loss analysis of a large scale BIPV system for university buildings in tropical weather conditions: a partial and cumulative performance ratio approach. Case Studies in Thermal Engineering, 25 (100916). pp. 1-14. ISSN 2214-157X. (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and M., Samykano (2017) Techno-economic analysis of 1 MWp grid connected solar PV plant in Malaysia. International Journal of Ambient Energy. pp. 1-10. ISSN 0143-0750 (Print); 2162-8246 (Online). (In Press / Online First) (In Press / Online First)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano (2018) Estimation of solar collector area for water heating in buildings of Malaysia. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES2018) , 01-02 March 2018 , Perpustakaan UMP Pekan, Universiti Malaysia Pahang. p. 1., 342 (1). ISSN 17578981 (Unpublished)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano (2018) Performance of thin-film BIPV as double sloped pitched roof in buildings of Malaysia. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40 (20). pp. 2476-2484. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano and Sukumaran, Sreenath (2018) Dust cleaning robots (DCR) for BIPV and BAPV solar power plants-A conceptual framework and research challenges. Procedia Computer Science, 133. pp. 746-754. ISSN 1877-0509. (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, M. (2019) Performance evaluation of CdTe BIPV roof and façades in tropical weather conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (9). pp. 1057-1071. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, Mahendran and Hyder, Farhan (2018) BIPV power plants and policy recommendatons. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 652-655.. ISBN 978-1-5386-3695-4

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, Mahendran and Jayaseelan, V. (2018) BIPV market growth: SWOT Analysis and favorable factors. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 412-415.. ISBN 978-1-5386-3695-4

Kumar A., Praveen and Nagarjun, J. and Ma, Quanjin (2021) Potentiality of MWCNT fillers on the lateral crashworthiness behaviour of polymer composite cylindrical tubes under quasi-static loading. Journal of Industrial Textiles, 51 (Issue 4_suppl). 7014S-7033S. ISSN 1528-0837. (Published)

Kumar R, Reji and A.K., Pandey and Samykano, Mahendran and Nath Mishra, Yogeshwar and R.V. Mohan, R.V. and Sharma, Kamal and Tyagi, V.V. (2022) Effect of surfactant on functionalized multi-walled carbon nano tubes enhanced salt hydrate phase change material. Journal of Energy Storage, 55 (105654). pp. 1-15. ISSN 2352-152X. (Published)

Kumaran, Kadirgama (2021) A comprehensive review on the application of nanofluids in the machining process. The International Journal of Advanced Manufacturing Technology, 115 (Issue 9-10). pp. 2669-2681. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Kumaran, Kadirgama and Devarajan, Ramasamy (2020) Nanocoolant alternative for cooling elements by UMP researchers. UMP News .

Kumaran, Kadirgama and Rahman, M. M. and Devarajan, Ramasamy and Mahendran, Samykano and Jose, Rajan Fundamental study of hybrid graphene oxide and nanofibrillated cellulose for aircraft wings application. , [Research Book Profile: Research Report] (Unpublished)

Kumaran, Kadirgama and Rahman, M. M. and Wan Sharuzi, Wan Harun Direct metal laser sintering technology for the Manufacture of fully porous functionally graded Titanium alloy femoral stems (fabrication and designing of fully porous functionally graded titanium alloy Femoral stems). , [Research Book Profile: Research Report] (Unpublished)

Kumaran, Kadirgama and Rahman, M. M. and Wan Sharuzi, Wan Harun Nano-structured diamond & silica coatings on CO-CR-MO substrate for biomedical application. , [Research Book Profile: Research Report] (Unpublished)

Kumaran, Kadirgama and Wan Sharuzi, Wan Harun (2020) A Global Outreach by two Malaysians Success Story Unveiled. UMP News .

Kumaresan, R. and Kananathan, J. and Samykano, M. and Kadirgama, Kumaran and Badadhe, Avinash M. (2023) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. Journal of Engineering and Technology (JET), 14 (1). pp. 91-99. ISSN 2180-3811. (Published)

Kumari, Khushboo and Suresh, Sundarajoo and Arisutha, S. and Sudhakar, K. (2018) Anaerobic co-digestion of different wastes in a UASB reactor. Waste Management and Research, 77. pp. 545-554. ISSN 0734242X. (Published)

Kunwar, Ria and Izan Izwan, Misnon and Hamdan, Daniyal and Rajan, Jose (2021) Miniature tool for characterization of supercapacitive charge storage. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Kurniawan, Tedi and Farah Alia, Fauzi and Asmara, Y. P. (2016) High-temperature Oxidation of Fe-Cr Steels in Steam Condition - A Review. Indonesian Journal of Science & Technology, 1 (1). pp. 107-114. ISSN 2527-8045. (Published)

Kusan, Reveendran and Mohd Nadzeri, Omar and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan and Azizul, Aziz (2023) Investigation on the acceleration of wrist and waist during a golf swing towards the ball trajectory. In: Lecture Notes in Bioengineering; International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 - 15 November 2022 , Kuala Lumpur. 223 -232.. ISSN 2195-271X ISBN 978-981990296-5

Kuwagi, Kenya and Takami, Toshihiro and Azri, Alias and Rong, Degang and Takeda, Hiroshi and Yanase, Shinichiro and Kouchi, Toshinori and Hyakutake, Toru and Yokoyama, Kaoru and Ohara, Yoshiyuki and Takahashi, Nobuo and Sugitsue, Noritake (2016) Development of DEM-CFD Simulation of Combustion Flow in Incinerator with the Representative Particle Model. Journal of Chemical Engineering of Japan, 49 (5). pp. 425-434. ISSN 0021-9592. (Published)

Kwan, Ze Zhen and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Design a precision motion control of an upper limb robotic arm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 6-15. ISSN 2637-0883. (Published)

L

L., Sandanamsamy and J., Mogan and K., Rajan and W. S. W., Harun and I., Ishak and F. R. M., Romlay and M., Samykano and K., Kadirgama (2023) Effect of process parameter on tensile properties of FDM printed PLA. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

L., Sandanamsamy and J., Mogan and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review on 3D printing bio-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012031). ISSN 1757-899X

L., Sandanamsamy and W. S. W., Harun and I., Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy and S. R. A., Idris and F., Tsumori (2022) A comprehensive review on fused deposition modelling of polylactic acid. Progress in Additive Manufacturing. pp. 1-25. ISSN 2363-9520. (Published)

L. A., Aziz and N. S., Arifin and S. M., Zokri and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and I., Waini and S., Shafie (2017) Mathematical Modelling on Convective Boundary Layer of Non-Newtonian Micropolar Viscoelastic Fluid. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 440-441. ISBN 9789670257884

L. C., Wor and M. M., Rahman (2015) Stress Behavior Of Tailor-Welded Blanks For Dissimilar Metals Using Finite Element Method. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2541-2554. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and N. F., Zainal Ariffin (2014) Process Parameter Optimization for Friction Stir Welding of AA6061 and AA7075. In: 10th International Friction Stir Welding Symposium , 20-22 Mei 2014 , Beijing, China. pp. 1-7.. (Unpublished)

L. H., Shah and Tsuchiya, B. and Nagata, S. and Shikama, T. (2011) The Effect of Gamma-rays on the Electrical Properties of Zr55Ni5Al10Cu30 Bulk Metallic Glass. Journal of Nuclear Materials, 417 (1-3). pp. 822-825. ISSN 0022-3115. (Published)

L. H., Shah and A., Gerlich and Y., Zhou. (2018) Design Guideline for Intermetallic Compound Mitigation in Al-Mg Dissimilar Welding through Addition of Interlayer. The International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 2667-2678. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Guo, Shihui and Walbridge, Scott and Gerlich, Adrian (2017) Effect of Tool Eccentricity on the Properties of Friction Stir Welded AA6061 Aluminum Alloys. Manufacturing Letters, 15. pp. 14-17. ISSN 2213-8463. (Published)

L. H., Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool offsetting and base metal positioning on the material flow of AA5052-AA6061 dissimilar friction stir welding. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6393-6402. ISSN 2231-8380 (online). (Published)

L. H., Shah and N., Huda and Esmaeili, S. and Walbridge, S. and Gerlich, A. P. (2020) Structural morphology of Al-Mg-Si alloy friction stir welds through tool eccentricity. Materials Letters, 275 (128098). pp. 1-4. ISSN 0167-577X. (Published)

L. H., Shah and N. F., Zainal Ariffin and A. R., Razali (2014) Application of Taguchi Optimization Technique on Dissimilar AA6061-AA7075 Friction Stir Welding. In: World Virtual Conference on Advanced Research in Materials & Engineering Applications , 22-26 September 2014 , Kuala Lumpur. . (Unpublished)

L. H., Shah and N. F., Zainal Ariffin and M., Ishak and A. R., Razali (2015) Mechanical and Microstructural Characterization of AA6061- AA7075 Dissimilar Friction Stir Welding. In: 6th International Conference on Manufacturing Science and Technology , 1-2 Jun 2015 , Bandar Seri Begawan, Brunei. pp. 1-6.. (Unpublished)

L. H., Shah and Nur Azhani, Abd Razak and Juliawati, Alias and M., Ishak (2013) Investigation on the Mechanical Properties of TIG Welded AA6061 Alloy Weldments using Different Aluminium Fillers. GSTF Journal of Engineering Technology, 2 (2). p. 116. ISSN 2251-3701 (print); 2251-371X (online). (Published)

L. H., Shah and Nur Farhana, Zainal Ariffin and A. R., Razali (2015) Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding using the Taguchi Method. Applied Mechanics and Materials, 695. pp. 20-23. ISSN 1662-7482. (Published)

L. H., Shah and Nurul Hidayah, Othman and Gerlich, Adrian (2017) Review of Research Progress on Aluminum-Magnesium Dissimilar Friction Stir Welding. Science and Technology of Welding and Joining, 23 (3). pp. 256-270. ISSN 1362-1718. (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

L. H., Shah and Zetty Akhtar, Abd Malek and M., Ishak (2013) Investigation on Aluminium-Stainless Steel Dissimilar Weld Quality Using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. Syam, Sundar and K. V., Sharma (2011) An Experimental Study On Heat Transfer And Friction Factor Of AL2O3 Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 99-112. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

L. Syam, Sundar and Kumar, N. T. Ravi and Naik, M. T. and Sharma, K. V. (2012) Effect of Full Length Twisted Tape Inserts on Heat Transfer and Friction Factor Enhancement with Fe3O4 Magnetic Nanofluid Inside a Plain Tube: An Experimental Study. International Journal of Heat and Mass Transfer, 55 (11-12). pp. 2761-2768. ISSN 0017-9310. (Published)

L. Y., Tan and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and F., Basrawi and Azim, Arshad (2014) Simulation Model to Assess Tidal Potential Energy in East Coast of Malaysia by using GIS. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .

Lagunesvary, Ganesan (2013) Heat exchanger for solar collector. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lahimer, A. A. and Amir, Abdul Razak and Kamaruzzaman, Sopian (2023) Mathematical modeling and validation of solar-induced ventilation system for vehicle cabin cooling in hot parking conditions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 110 (1). pp. 200-226. ISSN 2289-7879. (Published)

Lahimer, A. A. and K., Sopian and Amir, Abdul Razak and M. H., Ruslan and Alghoul, M. A. (2019) Experimental investigation on the performance of solar chimney for reduction of vehicle cabin soak temperature. Applied Thermal Engineering, 152. 247 - 260. ISSN 1359-4311. (Published)

Lai, Woon Shyz (2012) Prediction of grinding machinability when grind P20 tool steel using TiO2 nanofluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lam, Kheng Yik (2012) Remote data logger with multi-sensor for greenhouse. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lam, Zhi Kien and Sheikh Muhammad Hafiz Fahami, Zaina (2023) Stability control of humanoid biped robot using PID controllers. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 88-96. ISSN 2637-0883. (Published)

Lance, Clarence and Wan Muhammad Noor Sarbani, Mat Daud (2020) Improving production system performance using overall equipment effectiveness. International Journal of Industrial Management (IJIM), 6 (1). pp. 58-74. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Latifah, Md Yusoff (2008) Experimental analysis on drilling process of CFRP composite laminates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Latifah, Shabudin (2002) Active sway control of a gantry crane system using hybrid input shaping and PID control schemes. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Latiff, M. I. A. and Izwan, Ismail and Nuruzzaman, D.M. (2021) Characteristics of six layered Al/Si3N4 functionally graded materials prepared through two-step pressureless sintering process. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8508 -8517. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Latiff, M. I. A. and Jamaludin, S. N. S. and Basri, S. and Hussain, A. and Alothmany, D. S. and Mustapha, F. and Nuruzzaman, D. M. and Ismail, N. M. and Ismail, I. (2014) Effect of Sintering Temperature on Functionally Graded Nickel/Alumina Plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

Lau, Zhen Chyen (2010) Experimental laser-machining of silicon wafer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lau, Ngee Bing and Ismail, Mohd Khairuddin (2023) A PID-controlled approach in the design of a physiotherapy robot for upper arm rehabilitation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 14-22. ISSN 2637-0883. (Published)

Lau, Wei Hong and Mohd Azraai, Mohd Razman and Mohd Izzat, Mohd Rahman and Muhammad Nur Aiman, Shapiee (2023) Deep learning for medium-scale agricultural crop detection through aerial view images. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 79-87. ISSN 2637-0883. (Published)

Laupa, Junus (2011) Teknologi kitar semula minyak hitam. Utusan Malaysia .

Law, Chee Hong (2009) Performance optimization of domestic refrigerator using experimental method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Hoon Chit (2017) Experimental evaluation on the performance of waste biomass briquettes formation and combustion characteristics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Le Xin, Lee (2012) Design of obstacle avoidance robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Lee, Poh Seng (2010) Determination of certain thermo-physical properties of nanofluids. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Jie Ying and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum EDM die sinking parameters in micro dimple machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). pp. 58-65. ISSN 2636-9575. (Published)

Lee, K.H. and N. A. M, Mukhtar and Hagos, F. Y. and M. M., Noor (2017) A study of the stabilities, microstructures and fuel characteristics of tri-fuel (diesel-biodiesel-ethanol) using various fuel preparation methods. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-15., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Lee, Ka Hung (2010) Effect of chip formation on tool wear in machining of titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Kong Haur (2010) Remoted balbot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lee, Ming Jie (2010) PID implementation of UMP mini automation plant part 1- heating tank. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lee, Wai Loon (2010) Effect of electrical discharge machining process parameter on surface topograhy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Wei Loon and Sreekar Reddy, S. and A. K., Prasada Rao (2019) CFD simulation of direct chill casting process of magnesium alloy billets. Journal of Manufacturing Processes, 45. pp. 447-454. ISSN 1526-6125. (Published)

Lee May Shian, Helen and Aina Aishah, Maharon and Raja Murfiqah, Raja Mohd Fouzy and Norfazilasari, Yasman and Mohd Zairulnizam, Mohd Zawawi (2022) Fabrication of glass microlens array using laser-assisted contactless hot embossing. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 86..

Lemma, Tamiru Alemu and Noraimi, Omar and Gebremariam, M.A. and Shazaib, Ahsan (2019) Anti-friction bearing malfunction detection and diagnostics using hybrid approach. In: Lecture Notes in Mechanical Engineering; 4th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2018 , 14 - 15 November 2018 , Melaka. pp. 117-131.. ISSN 2195-4356 ISBN 978-981138296-3

Leong, W. D. and Teng, S. Y. and How, B. S. and Ngan, S. L. and Lam, H. L. and Tan, C. P. and Ponnambalam, S. G. (2019) Adaptive analytical approach to lean and green operations. Journal of Cleaner Production, 235. pp. 190-209. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Li, Zixiang and Janardhanan, Mukund Nilakantan and Tang, Qiuhua and Ponnambalam, S. G. (2019) Model and metaheuristics for robotic two-sided assembly line balancing problems with setup times. Swarm and Evolutionary Computation, 50 (100567). ISSN 2210-6502. (Published)

Liao, Binbin and Wang, Panding and Zheng, Jinyang and Cao, Xiaofei and Quanjin, Ma and Tao, Ran and Fang, Daining (2020) Effect of double impact positions on the low velocity impact behaviors and damage interference mechanism for composite laminates. Composites Part A: Applied Science and Manufacturing, 136 (105964). pp. 1-11. ISSN 1359-835X. (Published)

Liew, Annie Ann Nee (2010) Optimization of machining parameters of titanium alloy in electric discharge machining based on artificial neural network. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Liew, Kean Teong (2013) Design and implementation of adaptive conveyer belt for material sorting and handling assisted with image processing technology control by microcontroller. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang .

Liew, Yoong Sang (2009) The development of embedded negative input shaping for vibration control of a flexible manipulator by using PIC controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Likhan, Das and Navid, Aslfattahi and Khairul, Habib and R., Saidur and Kashif, Irshad and Syed Mohd, Yahya and Kadirgama, K. (2022) Improved thermophysical characteristics of a new class of ionic liquid + diethylene glycol/Al2O3 + CuO based ionanofluid as a coolant media for hybrid PV/T system. Thermal Science and Engineering Progress, 36 (101518). pp. 1-19. ISSN 24519049. (Published)

Lim, Liang Heong (2007) Design and fabrication of three axis mechanism with AC servo motor in application of personal computer numerical control. Faculty of Mechanical Enginering, Universiti Malaysia Pahang.

Lim, Meng Hee and Leong, Mohd Salman and Inayat-Hussain, J. I. and Ngui, Wai Keng (2015) Diagnosis of blade fault based on wavelet scalogram and blade pass vibration signature analysis. Journal of Vibrational Engineering and Technologies, 3 (4). pp. 497-512. ISSN 2321-3558. (Published)

Lim, Sheh Hong and Matalif, Muhammad Uzair and Nurul Najihah, Mohd Nazri and Mohd Azrul Hisham, Mohd Adib (2019) Effects of blood flow pattern and cross-sectional area on hemodynamic of patient-specific cerebral aneurysm via fluid-structure interaction method: A review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Lim, Sheh Hong and Mohd Azrul Hisham, Mohd Adib and Mohd Shafie, Abdullah and Radhiana, Hassan (2020) Qualitative and quantitative comparison of hemodynamics between MRI Measurement and CFD Simulation on Patientspecific Cerebral Aneurysm - A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 112-123. ISSN 2289-7879. (Published)

Lim, Sheh Hong and Mohd Azrul Hisham, Mohd Adib and Muhammad Uzair, Matalif and Mohd Shafie, Abdullah and Nur Hartini, Mohd Taib and Radhiana, Hassan (2020) Modeling and simulation of blood flow analysis on simplified aneurysm models. In: IOP Conference Series: Materials Science and Engineering, International Conference on Technology, Engineering and Sciences (ICTES2020) , 17-18 April 2020 , Penang, Malaysia. pp. 1-9., 917 (012067). ISSN 1757-899X

Lim, Sheh Hong and Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2020) Experimental study on the performance of vortex tube cooling device on a cooling jacket. In: IOP Conference Series: Earth and Environmental Science, 10th International Conference on Future Environment and Energy , 7-9 January 2020 , Kyoto, Japan. pp. 1-8., 581 (012018). ISSN 1755-1315

Lim, Sing Wee (2012) CFD simulation using fluent to determine the heat transfer coefficient of a packed bed system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim, Syh Kai (2018) Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Razlan, Yusoff).

Lim, Syh Kai and Ahmad Razlan, Yusoff (2023) Effects of Hybrid Nanocooling-Lubricants MQCL on Machining Temperature and Tool Wear Mechanisms under Turning Process of Titanium Alloy. Tribology Online, 18 (6). pp. 385-395. ISSN 1881-218X(Printed) 1881-2198 (Online). (Published)

Lim, Wei Jie and Normaniha, Abd Ghani (2022) Covid-19 mandatory self-quarantine wearable device for authority monitoring with edge ai reporting & flagging system. Health and Technology, 12. pp. 215-226. ISSN 2190-7188 (printed), 2190-7196(Online). (Published)

Lim, Weng Zhen and Norasmiza, Mohd and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Koon, Yin Goon (2023) Screw absence classification on aluminum plate via features based transfer learning models. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 62-66. ISSN 2637-0883. (Published)

Lim, Zi Chao (2010) Dual axis solar tracker study. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lingenthiran, Samylingam (2015) Mechanical and physical properties of kenaf fibre reinforced thermoplastic elastomer composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Lingenthiran, Samylingam (2019) Modelling and verification of TiO2/ZnO/EGW nano coolant on the tin milling tool performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, A/l Kadirgama).

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310. (Published)

Liu, Xiaojun and Daigo, Uchino and Ikeda, Keigo and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki (2018) Driving assist system for ultra-compact EVs-fundamental consideration of muscle burden owing to differences in the drivers' physiques. Actuators, 7 (3). pp. 1-10. ISSN 2076-0825. (Published)

Liu, Xiaojun and Uchino, Daigo and Ikeda, Keigo and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki (2018) Driving assist system for ultra-compact EVs—fundamental consideration of muscle burden owing to differences in the drivers’ physiques. Actuators, 7 (3). pp. 1-10. ISSN 2076-0825. (Published)

Loh, Simon Hock Hua (2010) Feasible laser parameter in fabrication of MEMS structure on PMMA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Choon Lee (2008) Effect types of coolant on tool wear and surface roughness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Jit Hao and M. Nafis, O. Z. (2022) A study on obstacle detection for IoT based automated guided vehicle (AGV). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 30-41. ISSN 2637-0883. (Published)

Loh, Quo Liang and Kok, Yin Hui and Nur Hazreen, Mohd Hasni and Mohd Azrul Hisham, Mohd Adib (2018) Development of heart simulator (Heart-S) on the left ventricle for measuring the blood circulation during cardiac cycle. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 36. pp. 78-83. ISSN 2296-9837. (Published)

Loh, Wing Liong (2012) Performance of refrigerator operating with and without liquid-suction heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Low, M. H. and M. N.A., Mukhtar and Hagos, F. Y. and M. M., Noor (2017) Tri-fuel (diesel-biodiesel-ethanol) emulsion characterization, stability and the corrosion effect. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-11., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Lukman Nul-Hakem, Mohd Yusop (2012) Experimental study of six-stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Luqman, Abdul Halim and Firdaus, Basrawi and Ahmmad Shukrie, Md Yudin and Nurul Aini, Mohd Azman and Oumer, Ahmed Nurye and Shamsul Bahri, Abd Razak (2022) Pulsation-assisted fluidised bed drying of heat-sensitive and sticky materials: effect of basic parameter, and pulsation-specific parameter. Particulate Science and Technology. pp. 1-14. ISSN 0272-6351 (Print); 1548-0046 (Online). (Published)

Luqman, Abdul Halim and Firdaus, Basrawi and Chong, Jia Zheng and Oumer, A. N. and Ahmmad Shukrie, Md Yudin and Mohd Hazwan, Yusof and Shaharin, A Sulaiman (2018) Preliminary study on drying of stingless bee pot pollen using novel fluidized bed dryer with swirling distributor. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. pp. 1-5., 225 (04007). ISSN 2261-236X

Luqman, Abdul Halim and Firdaus, Basrawi and Mohammad Wajdi, Ibrahim and Ahmmad Shukrie, Md Yudin and Nurul Aini, Mohd Azman (2022) Effect of Temperature on Drying Performance of Stingless Bee Pot-Pollen Using Swirling Fluidized Bed Dryer. In: 18th International Conference on Clean Energy (ICCE2022) , Borneo Convention Centre Kuching (BCCK), Sarawak , 27-27 July 2022. pp. 1-5.. (In Press / Online First)

Luqman, Abdul Halim and Firdaus, Basrawi and Siti Norazualina, Faizal and Ahmmad Shukrie, Md Yudin and Mohd Yusof, Taib (2020) Effect of superficial air velocity on the fluidized bed drying performance of stingless bee pot-pollen. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-5., 863. ISSN 1757-8981 (Print); 1757-899X (Online)

Luqman Abdul, Halim and Firdaus, Basrawi and Ahmmad Shukrie, Md Yudin and Amir, Abdul Razak and Nor Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat (2020) Drying of stingless bees pot-pollen using swirling fluidized bed dryer. Drying Technology. pp. 1-9. ISSN 0737-3937. (Published)

Luqman Hakim, Ahmad Shah (2021) The Camouflage That Grapples Our Perception. FTKMA Bulletin (2). p. 19. ISSN 2773-594X

Luqman Hakim, Ahmad Shah and Hou, Wentao and Razmpoosh, Mohammad Hadi and Walbridge, Scott S. and Gerlich, Adrian P. (2022) Strain rate and microtexture analysis of rapid-quenched AA6061 friction stir welds produced with tool eccentricity. Journal of Materials Research and Technology, 21. pp. 1434-1441. ISSN 2238-7854. (Published)

Luqman Hakim, Ahmad Shah and Khodabakhshi, Farzad and Gerlich, Adrian (2019) Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayer. Journal of Manufacturing Processes, 37. pp. 212-219. ISSN 1526-6125. (Published)

Luqman Hakim, Ahmad Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool eccentricity on the material flow and microstructural properties of AA6061 aluminum alloy friction stir welds. Journal of Alloys and Compounds, 826 (154219). pp. 1-11. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Luqman Hakim, Ahmad Shah and N. H, Othman and Gerlich, A. P. (2018) Review of research progress on aluminium–magnesium dissimilar friction stir welding. Science and Technology of Welding and Joining, 23 (3). pp. 256-270. ISSN 1362-1718. (Published)

Luqman Hakim, Ahmad Shah and Sonbolestan, Seyedhossein and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2019) Dissimilar friction stir welding of thick plate AA5052-AA6061 aluminum alloys: effects of material positioning and tool eccentricity. The International Journal of Advanced Manufacturing Technology, 105 (1-4). pp. 889-904. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M

M'hamed, Beriache and Nor Azwadi, Che Sidik and Mohammad Noor Afiq Witri, Muhammad Yazid and R., Mamat and G., Najafi and G. H. R., Kefayati (2016) A Review on Why Researchers Apply External Magnetic Field on Nanofluids. International Communications in Heat and Mass Transfer, 78. pp. 60-67. ISSN 0735-1933. (Published)

M'hamed, Beriache and Nor Azwadi, Che Sidik and Mohd Faizal, Ali Akhbar and R., Mamat and G., Najafi (2016) Experimental study on thermal performance of MWCNT nanocoolant in Perodua Kelisa 1000cc radiator system. International Communications in Heat and Mass Transfer, 76. pp. 156-161. ISSN 0735-1933. (Published)

M., Ishak and M. I., Rafiquel and M. M., Rahman (2012) Effects of Heat Input on Mechanical Properties of Metal Inert Gas Welded 1.6mm Thick Galvanized Steel Sheet. IOP Conference Series: Materials Science and Engineering, 36 (012011). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Experimental Investigation on Heat Transfer and Pressure Drop Characteristics of Air Flow over a Staggered Flat Tube Bank in Crossflow. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (2013). pp. 900-911. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Laminar Forced Convection Heat Transfer over Staggered Circular Tube Banks: A CFD Approach. Journal of Mechanical Engineering and Sciences (JMES), 4 (June 2). pp. 418-430. ISSN 2231-8380 (online). (Published)

M., Mohamad Rashidi and I., Mohamad Hasbullah (2007) Application of Taguchi Method using computer software to determine nodularisation effect of ductile iron castings. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

M., Sarizam and H., Terasaki and Y., Komizo (2013) Effect of Holding Temperature to Bainite Transformation in Cr Mo Steel. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-11..

M., Adnan Hussein and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2014) Heat Transfer Augmentation of a Car Radiator using Nanofluids. Heat and Mass Transfer, 50 (11). pp. 1553-1561. ISSN 0947-7411(Print); 1432-1181(Online). (Published)

M., Faris and Fadhlur Rahman, Mohd Romlay and Akhtar Razul, Razali and M. R., Hanifah and A., Ghazali (2022) Electric vehicle drive specification modelling for three wheels scooter configuration. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 85-95., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

M., Ghafoori and B., Ghobadian and G., Najafi and M., Layeghi and A., Rashidi and R., Mamat (2015) Effect of Nano-Particles on the Performance and Emission of a Diesel Engine using Biodiesel-Diesel Blend. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3097-3109. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ghanbari and G., Najafi and B., Ghobadian and R., Mamat and M. M., Noor (2015) Performance and Emission Characteristics of a Ci Engine Fueled With Nanodiesel. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

M., Ghanbari and G., Najafi and B., Ghobadian and R., Mamat and M. M., Noor and A., Moosavian (2015) Adaptive Neuro-Fuzzy Inference System (Anfis) to Predict Ci Engine Parameters Fueled with Nano-Particles Additive to Diesel Fuel. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012070). ISSN 1757-8981 (Print); 1757-899X (Online)

M., Hazim and L., Chee Wai and G., Devandran and M., Khalid and M., Hanis (2015) Design and Development of Five Parallel Engines for Lubricantsand Fuel Testing Experimental Rigs, Part 3. In: 2 nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-18..

M., Ishak (2016) Introductory Chapter: A Brief Introduction to Joining and Welding. In: Joining Technologies. Intech, Croatia. ISBN 978-953-51-2596-9 (Print); 978-953-51-2597-6 (online)

M., Ishak and A. S. K., Razali and N. F. M., Noordin and L. H. A., Shah and F. R. M., Romlay (2015) The Effect of Filler on Weld Metal Structure of AA6061 Aluminum Alloy by Tungsten Inert Gas (TIG). In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. , 11 (1). ISSN 22298649

M., Ishak and Amir, Aziz and Asnul Hadi, Ahmad (2014) Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of A356 Alloy. International Review on Modelling and Simulations (I.R.E.M.O.S), 8 (1). pp. 289-295. ISSN 1974-9821. (Published)

M., Ishak and Fatimah, S. and S. N., Aqida (2012) CO2 Laser Cutting of Glass Fiber Reinforce Polymer Composite. IOP Conference Series: Materials Science and Engineering, 36 (012033). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and K. I., Yaakob and M. M., Quazi and M. N. M., Salleh (2018) Optimizing the pulse wave mode low power fibre laser welding parameters of 22Mnb5 boron steel using response surface methodology. Measurement, 135. pp. 452-466. ISSN 0263-2241. (Published)

M., Ishak and Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Surface Roughness of Ti-6Al-4V In Electrical Discharge Machining: A Regression Model. Journal of Mechanical Engineering and Sciences (JMES), 1 (Dec 20). pp. 16-24. ISSN 2231-8380 (online). (Published)

M., Ishak and L. H., Shah (2014) Review of Research Progress on Aluminum-Steel Dissimilar Welding. Materials and Manufacturing Processes. pp. 1-24. ISSN 1042-6914 (print); 1532-2475 (online). (Published)

M., Ishak and L. H., Shah and I. S. R., Aisha and W., Hafizi and M. R., Islam (2014) Study of Resistance Spot Welding Between AISI 301 Stainless Steel and AISI 1020 Carbon Steel Dissimilar Alloys. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 793-806. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Hardness Effect of Friction Stir Welding by MILKO 37 Milling Machine. In: AIP Conference Proceeding 1660, 070096 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28–30 May 2014 , Penang, Malaysia. pp. 1-6..

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Microstructure of Aluminum A5083 Butt Joint by Friction Stir Welding. In: AIP Conference Proceeding 1660 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. pp. 1-9..

M., Ishak and M. N. M., Salleh (2018) Double fillet lap of laser welding of thin sheet AZ31B Mg alloy. In: International Laser Technology and Optics Symposium (ILATOS 2017) , 26-28 September 2017 , Pulai Spring Resort, Johor Bahru. pp. 1-6., 1027 (1). ISSN 17426588

M., Ishak and M. N. M., Salleh and Aiman, Mohd Halil and A. M., Hanafi (2018) Investigation on the weld geometry of fiber laser dissimilar welded of boron steel for TWB application. In: Joining and Welding Symposium 2018 (JWS 2018) , 23 October 2018 , Library, UMP Pekan. pp. 1-10.. (Unpublished)

M., Ishak and M. N. M., Salleh and F. R. M., Romlay (2015) A Study on Bead on Plate Welding of AA7075 By Low Power Fiber Laser. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

M., Ishak and M. Rafiqul, Islam (2014) Weldability of A7075-T651 and AZ31B Dissimilar Alloys by MIG Welding Method Based on Welding Appearances. Journal of Physics: Conference series, 495. pp. 1-8. ISSN 1742-6588 (print); 1742-6596 (online). (Published)

M., Ishak and M. Rafiqul, Islam and Toshiyuki, Sawa (2014) GMA Spot Welding of A7075-T651/AZ31B Dissimilar Alloys using Stainless Steel Filler. Materials and Manufacturing Processes, 29 (8). pp. 980-987. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

M., Ishak and Maekawa, Katsuhiro and Yamasaki, Kazuhiko (2012) The Characteristics of Laser Welded Magnesium Alloy Using Silver Nanoparticles as Insert Material. Materials Science and Engineering: A, 536 (February 2012). pp. 143-151. ISSN 0921-5093. (Published)

M., Ishak and Muhammad Naqiuddin, Mat Salleh and Siti Rabiatull Aisha, Idris (2017) The Mechanical and Microstructural Study of Welded AA7075 Using Different Filler Metals. International Journal of Computational Methods and Experimental Measurements, 5 (5). 696 -712. ISSN 2046-0546 (print); 2046-0554 (online). (Published)

M., Ishak and N. F. M., Noordin and A. S. K., Razali and L. H., Shah and F. R. M., Romlay (2015) Effect Of Filler On Weld Metal Structure Of AA6061 Aluminum Alloy By Tungsten Inert Gas Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2438-2446. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Norazlianie, Sazali and M. F., Ghazali (2020) A short review on different metal alloys on rapid cooling process. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 736 (052034). ISSN 1757-8981 (Print), 1757-899X (Online)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER4043 and ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Parametric Studies on Tensile Strength in Joining AA6061-T6 and AA7075-T6 by Gas Metal Arc Welding Process. IOP Conference Series: Materials Science and Engineering, 100 (012042). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Takagi, H. (2012) The Characteristics of Unidirectional Solidified Ni-Al-Mo Alloys = Charakterisierung von unidirektional erstarrten Ni-Al-Mo Legierungen. Materialwissenschaft und Werkstofftechnik = Materials Science and Engineering Technology, 43 (5). pp. 416-420. ISSN 0933-5137. (Published)

M., Ishak and Thet, Thet Mon and Noriah, Bidin and Yap, Tze Chuen (2014) On Generation of Micro-Feature on Silicon with an Industrial Laser. Materials Science Forum, 773 - . pp. 661-669. ISSN 0255-5476. (Published)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2013) Characteristics of Welded Thin Sheet AZ31 Magnesium Alloy. In: Experimental and Numerical Investigation of Advanced Materials and Structures. Advanced Structured Materials, 41 . Springer International Publishing, pp. 147-160. ISBN 978-3-319-00505-8 (print), 978-3-319-00506-5 (online)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2012) Laser Welding of Thin Sheet Magnesium Alloys. In: Nd YAG Laser. Intech Open Access Publisher, pp. 135-157. ISBN 978-953-51-0105-5 (online)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2010) Microstructure and Corrosion Behavior of Laser Welded Magnesium Alloys with Silver Nanoparticles. World Academy of Science, Engineering and Technology, 45 (2010). pp. 420-435. ISSN 2010-376x (print), 2010-3778 (online). (Published)

M., Jamil and Mohd Adnin, Hamidi and Ahmad Fitri, Yusop and M. F., Zakiyuddin and Mohd Nadzeri, Omar (2023) Study of engine performance, emission and combustion of reactivity controlled compression ignition (RCCI) mode engine. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 51-63.. ISSN 2195-4356 ISBN 978-981191456-0

M., Jamshidian and P., Thamburaja and T., Rabczuk (2016) Modeling the Effect of Surface Energy on Stressed Grain Growth in Cubic Polycrystalline Bodies. Scripta Materialia, 113. pp. 209-213. ISSN 1359-6462. (Published)

M., Jusop and M. F. F., Ab Rashid (2015) A Review on Simple Assembly Line Balancing Type-e problem. In: IOP Conference Series: Materials Science and Engineering : 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (1). ISBN 1757-899X

M., Kaamal and M. M., Rahman (2015) Dual-Criteria Method For Determining Critical Plane Orientation For Multiaxial Fatigue Prediction Using A Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2571-2581. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) Fatigue Life Estimation Based On Continuum Mechanics Theory With Application Of Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2586-2598. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) An Integrated Approach For Fatigue Life Estimation Based On Continuum Mechanics Theory And Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2756-2770. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2016) Multiaxial Fatigue Life Modelling using Hybrid Approach of Critical Plane and Genetic Algorithm. Fatigue & Fracture of Engineering Materials & Structures, 39 (4). pp. 479-490. ISSN 1460-2695. (Published)

M., Kamal and M. M., Rahman (2012) Study on dynamic behaviour of wishbone suspension system. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012019). ISSN 1757-899X

M., Kamal and M. M., Rahman and Abdul Ghaffar, Abdul Rahman (2012) Fatigue Life Evaluation of Suspension Knuckle Using Multibody Simulation Technique. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 291-300. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Application of Multibody Simulation for Fatigue Life Estimation. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 912-923. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Fatigue Life Prediction Using Simplified Endurance Function Model. Advances in Mechanical Engineering, 2013 (581754). pp. 1-12. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

M., Malik and R., Sharif and S., Sharif and Wan Azhar, Wan Yusoff (2014) Performance of TialN coated carbide tool in peck drilling stainless steel SS316L with pressurized minimum quantity lubrication. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 332-339. ISSN 1991-8178. (Published)

M., Nasuha and M. M., Rashidi and A., Hadi and Z., Shayfull (2021) Effect of thickness on the microstructure and morphology of copper alloy castings. In: AIP Conference Proceedings: Proceedings of Green Design And Manufacture 2020 , 23-24 July 2020 , Arau, Perlis, Malaysia. pp. 1-7., 2339 (020032). ISSN 0094-243X

M., Nasuha and M. M., Rashidi and A., Hadi and Z., Shayfull (2021) Investigation on microstructure and morphology of copper alloy castings. In: AIP Conference Proceedings: Proceedings of Green Design And Manufacture 2020 , 23-24 July 2020 , Arau, Perlis, Malaysia. pp. 1-6., 2339 (020031). ISSN 0094-243X ISBN 978-0-7354-4091-3

M., Nasuha and Mohd Rashidi, Maarof and Asnul Hadi, Ahmad and Shayfull, Z. and Sheng, T. M. (2023) Effect of cavity thickness on copper alloy corrosion resistance. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 315 - 328.. ISSN 2195-4356 ISBN 978-981191456-0

M., Norhafana and C. K., Ihsan and Noor, M. M. and A. A., Hairuddin and K., Kadirgama and D., Ramasamy (2023) Emission characteristics effect on rice bran oil enriched with diesel fuel on compression ignition engine. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 75 -88.. ISSN 2195-4356 ISBN 978-981191456-0

M., Norhafana and M. M., Noor and Hagos, F. Y. and A. Aziz, Hairuddin and K., Kadirgama and D., Ramasamy and M. M., Rahman and G., Najafi (2019) Study of fuel properties test: Diesel and various blending nanoparticles based diesel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

M., Puvanesan and M. M., Rahman and Najiha, M. S. and K., Kadirgama (2014) Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1538-1549. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Saifizi and M. Z., Ab Muin and Sazali, Yaacob and M. S., Mohamad (2013) Comparison of Arx and Armax Model for Thermoelectric Refrigerator. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10..

M., Samykano and Kananathan, J. and K., Kadirgama and Amirruddin, Abdul Kadir and D., Ramasamy and Samylingam, L. (2021) Characterisation, performance and optimisation of nanocellulose metalworking fluid (MWF) for green machining process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9188-9207. ISSN 2180-1606. (Published)

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and R., Saidur (2022) Experimental study on properties of hybrid stable & surfactant-free nanofluids GNPs/CNCs (Graphene nanoplatelets/cellulose nanocrystal) in water/ethylene glycol mixture for heat transfer application. Journal of Molecular Liquids, 348 (118019). pp. 1-10. ISSN 0167-7322. (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Enhancement of the heat transfer in radiator with louvered fin by using graphene-based hybrid nanofluids. In: IOP Conference Series: Materials Science and Engineering, 1st International Colloquium on Computational and Experimental Mechanics (ICCEM 2020) , 25 - 26 June 2020 , Selangor, Malaysia. pp. 1-14., 1062 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Heat transfer performance of a radiator with and without louvered strip by using graphene-based nanofluids. Journal of Thermal Engineering, 7 (6). 1315 -1328. ISSN 2148-7847. (Published)

M., Waris and Panigrahi, Shrikant and Almuniri, Khamis Said Nasser and Soomro, Mujeeb Iqbal and Mirjat, Nayyar Hussain and Alqaydi, Eisa Salim (2019) Investigating the Dynamic Impact of CO2 Emissions and Economic Growth on Renewable Energy Production: Evidence from FMOLS and DOLS Tests. Processes, 7 (8). pp. 1-19. ISSN 2227-9717. (Published)

M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M., Zalinawati and Siregar, J. P. and Tezara, C. and Jaafar, J. and M. H. M., Hamdan and Oumer, A. N. and T., Rihayat (2020) Effect of surface modification on mechanical properties of buri palm (Corypha Utan) fibre composite reinforcement. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8298-8309. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. A, Muhammed Nor and A. F., Yusop and M. N., Omar and N. A., Abdul Hamid and W. M., Wan Mohamed (2022) Alternative railway tools and sustainability in RAMS: A review. In: Technological Advancement in Instrumentation & Human Engineering. Lecture Notes in Electrical Engineering book series (LNEE), 882 . Springer, Singapore, pp. 541-554. ISBN 978-981-19-1576-5 (Printed); 978-981-19-1577-2(Online)

M. A., Aris and Zahari, Taha and M. H. A., Hassan (2013) The Influence of Football Boot Construction on Ball Velocity and Deformation. In: International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

M. A., Azmi and H. Z., Abdullah and M. I., Idris (2013) Properties of Polyurethane Foam/Coconut Coir Fiber as a Core Material and as a Sandwich Composites Component. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-7..

M. A., Anwar and A. K., Zainal and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Priyadonko, G. and Saptaji, Kushendarsyah (2019) Electrochemical exfoliation of pencil graphite core by salt electrolyte. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. p. 1., 469 (1). ISSN 1757-8981

M. A., Anwar and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Oumar, A. N. and Nandyanto, A. B. D. (2017) Morphology Evaluation of ZrO2 Dip Coating on Mild Steel and its Corrosion Performance in NaOH Solution. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-6., 257 (012087). ISSN 1757-899X

M. A., Fitriady and Nurizzatul Atikha, Rahmat and A. F., Mohammad and S. A., Zaki (2023) Numerical simulation of the boundary layer development behind a single quarter elliptic-wedge spire. Journal of Mechanical Engineering and Sciences (JMES), 17 (2). 9421 -9432. ISSN 2231-8380 (online). (Published)

M. A., Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (2). pp. 363-371. (Published)

M. A., Hisyam and Dayangku Noorfazidah, Awang Sh'ri (2017) Grain size and mechanical properties of metals subjected to equal channel angular pressing (ECAP) process. In: Proceedings of Mechanical Engineering Research Day 2017 , 30 March 2017 , UTEM Library, Melaka. pp. 301-302.. ISBN 978-967-0257-884

M. A., Maleque and M. M., Rahman (2016) Wear Study of Mg-SiCp Reinforcement Aluminium Metal Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1758-1764. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A., Mohd Saaroni and Norazlianie, Sazali and M. F., Ghazali (2020) A significant review on different cooling agent during rapid cooling process of low carbon steel. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Penang, Malaysia. pp. 1-7., 736 (022118).

M. A., Yunus and M. N., Abdul Rani and M. S. M., Sani and M. A. S., Aziz Shah (2018) Finite element model updating of riveted joints of simplified model aircraft structure. In: AIP Conference Proceedings: International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS) , 21-24 December 2017 , Secunderabad, Telangana, Hyderabad, India. p. 1., 1952. ISSN 0094-243X

M. A. A., Aziz and Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and Mohd Adnin, Hamidi and Azri, Alias and H., Hussin and S., Hamri (2017) Study of alcohol fuel of butanol and ethanol effect on the compression ignition (CI) engine performance, combustion and emission characteristic. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-13., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

M. A. F., Romzi and J., Alias and M. I., M. Ramli (2021) Effect of zinc (Zn) on the microstructure and corrosion behaviour of magnesium (Mg). Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

M. A. F., Romzi and Juliawati, Alias and M. I. M., Ramli (2021) Recent progress on the corrosion characterization of magnesium (Mg) prepared by powder metallurgy technique. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-12., 1068 (012004). ISSN 1757-899X

M. A. H., Abu Hassan and Dayangku Noorfazidah, Awang Shri (2017) Microstructure and Mechanical Properties of Metals Subjected to Equal Channel Angular Pressing (ECAP) Process. In: Mechanical Engineering Research Day 2017 , 30 Mac 2017 , Perpustakaan UTEM. pp. 1-2.. (Unpublished)

M. A. H., Aizzat and Muhamad Zuhairi, Sulaiman and Enoki, K. and Okawa, T. (2019) Heat transfer coefficient of nucleate boiling in low concentration level of single and hybrid Al2O3-SiO2 water-based nanofluids. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012109). ISSN 1757-899X

M. A. H., Aizzat and Muhamad Zuhairi, Sulaiman and Okawa, T. (2020) Quasi steady state of nucleate boiling heat transfer in low concentration of single and hybrid Al2O3-SiO2 water-based nanofluids. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-11., 788 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

M. A. H. P., Zaini and Mohd Mawardi, Saari and Nurul A’in, Nadzri and Aiman, Mohd Halil and A. J. S., Hanifah and Tsukada, Keiji Evaluation of back-side slits with sub-millimeter resolution using a differential AMR probe. In: Lecture Notes in Electrical Engineering; 11th National Technical Symposium on Unmanned System Technology, NUSYS 2019 , 2 - 3 December 2019 , Kuantan, Malaysia. 319 -328., 666. ISSN 1876-1100 ISBN 978-981155280-9

M. A. S., Aziz Shah and M. A., Yunus and M. N., Abdul Rani and A. M., Saman and M. S. M., Sani and M. S., Mohd Zin (2019) The effect of laser stitch welding residual stress on the dynamic behaviour of thin steel structure. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5780-5790. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A. S., Aziz Shah and M. A., Yunus and M. N., Abdul Rani and M. S. M., Sani (2020) The application of non-deterministic model updating method of a complex jointed structure using central composite design based meta-model. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology 2019 , 29-30 August 2019 , Lampung, Indonesia. pp. 1-9., 807 (012036). ISSN 1757-8981 (Print), 1757-899X (Online)

M. A. S. M., Tarminzi and Amir, Abdul Razak and M. A. A., Azmi and Y. H., Ming and M. R. M., Akramin and N. M., Mohktar and A. F., Sharol (2021) Recent advances in solar drying system: A review. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-13. ISSN 2289-697X. (Published)

M. Arif, Fikri and Suraparaju, Subbarama Kousik and Mahendran, S. and Pandey, A. K. and Rajamony, Reji Kumar and K., Kadirgama and M. F., Ghazali (2023) Enhanced thermal properties of phase change materials through surfactant-functionalized graphene nanoplatelets for sustainable energy storage. Energies, 16 (22). pp. 1-18. ISSN 1996-1073. (Published)

M. E., Babiker and A. R. A., Aziz and M., Heikal and S., Yusup and Hagos, F. Y. (2016) Experimental and Simulation Study on Steam Gasification of Phoenix-Dactylifera Date Palm Seeds. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3201-3214. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. F., Fariz and C. K., Ihsan and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. T., Hoang (2018) Performance and emission characteristic of compression ignition engine using blend of diesel and canola oil. In: The 7th International Conference On Design And Concurrent Engineering 2018 (IDECON 2018) , 17-18 September 2018 , Kuching, Sarawak. pp. 1-8.. (Unpublished)

M. F., Ghazali and F. A., Rahim (2013) CFD Prediction of Heat and Fluid Flow through U-Bends using High Reynolds-number EVM and DSM Models. Procedia Engineering, 53. pp. 600-606. ISSN 1877-7058. (Published)

M. F., Ghazali and Muhammad Hanafi, Yusop and Mohd Fadhlan, Mohd Yusof and Muhammad Aminuddin, Pi Remli and Abdul Malik, Awang Hamat (2018) Leak locator (rig to real). In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Unpublished)

M. F., Ghazali and Priyandoko, Gigih and Wan Sofian, Wan Hamat and Tan, Wan Ching (2014) Plastic Pipe Crack Detection Using Ultrasonic Guided Wave Method. In: 8th Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014) , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-5..

M. F., Hamizatun and S. A, Haikal and Nik Mohd Zuki, Nik Mohamed (2023) Ergonomic embedded in designing welding assembly tool for automotive manufacturing process. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 23-30. ISSN 2636-9575. (Published)

M. F., Hassan (2019) Theory and derivation of unsymmetrical rotor equation of the foil-air bearing rotor system and its validation with experiment data. In: IOP Conference Series: Materials Science and Engineering, 6th International Conference on Applications and Design in Mechanical Engineering , 26-27 August 2019 , Pulau Pinang, Malaysia. pp. 1-5., 670 (012003). ISSN 1757-899X

M. F., Hassan and Nor Syukriah, Khalid (2021) Sensitivity identification of low-frequency cantilever fibre bragg grating accelerometer. International Journal of Integrated Engineering, 13 (7). pp. 235-244. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. F., Ismail and W. H., Azmi and R., Mamat and R., Ab Rahim (2022) Rheological Behaviour and Thermal Conductivity of Polyvinyl Ether Lubricant Modified with SiO2-TiO2 Nanoparticles for Refrigeration System. International Journal of Refrigeration, 138. pp. 118-132. ISSN 0140-7007. (Published)

M. F., Nabil and Azmi, W. H. and Abdul Hamid, K. and R., Mamat (2018) Experimental investigation of heat transfer and friction factor of TiO2-SiO2 nanofluids in water:ethylene glycol mixture. International Journal of Heat and Mass Transfer, 124. pp. 1361-1369. ISSN 0017-9310. (Published)

M. F., Nabil and Azmi, W. H. and K., Abdul Hamid and R., Mamat and Hagos, F. Y. (2017) An Experimental Study on the Thermal Conductivity and Dynamic Viscosity of Tio2-Sio2 Nanofluids in Water: Ethylene Glycol Mixture. International Communications in Heat and Mass Transfer, 86. pp. 181-189. ISSN 0735-1933. (Published)

M. F., Nabil and Azmi, W. H. and K. A., Hamid and R., Mamat (2017) Heat Transfer and Friction Factor of Composite TiO2–SiO2nanofluids in Water-Ethylene Glycol (60:40) Mixture. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012066). ISSN 1757-8981 (Print); 1757-899X (Online)

M. F., Nabil and Azmi, W. H. and K. A., Hamid and R., Mamat (2017) Heat transfer and friction factor of composite TiO2-SiO2 nanofluids in water-ethylene glycol (60:40) mixture. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-8., 257 (1). ISSN 1757-8981(print); 1757-899X(online)

M. F., Nabil and W. H., Azmi and K. A., Hamid and N. N. M., Zawawi and Priyandoko, Gigih and R., Mamat (2017) Thermo-physical Properties of Hybrid Nanofluids and Hybrid Nanolubricants: A Comprehensive Review on Performance. International Communications in Heat and Mass Transfer, 83. pp. 30-39. ISSN 0735-1933. (Published)

M. F., Othman and Abdul Adam, Abdullah and K., Kamal and Syuhaida, Asri and Zulkifli, Azmi and R., Mamat (2019) Improvement of fuel properties for palm oil methyl ester (POME) biodiesel blends using organic germanium as additives. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012121). ISSN 1757-8981 (Print), 1757-899X (Online)

M. F., Rani and M. R. M., Rejab and M. I., Ibrahim and N. K., Romli (2023) Mechanical characterization of 3/2 fibre metal laminate materials. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9753 -9763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F., Zakiyuddin and Muthanna, Jamil and M. A., Hamidi and A. F., Yusop (2023) Effect of Primary Reference Fuel on Reactivity-Controlled Compression Ignition Engine Emission Produce. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 65-74.. ISBN 978-981-19-1457-7

M. F. F., Ab Rashid and Gan, Sin Yi and Noryanti, Muhammad (2009) Mathematical Modeling to Predict Surface Roughness in CNC Milling. Proceedings of World Academy of Science, Engineering and Technology, 3 (5). pp. 393-396. ISSN 2070-3740. (Published)

M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose and N. M. Zuki, N. M. (2022) Hybrid flow shop scheduling with energy consumption in machine shop using moth flame optimization. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 77-86., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

M. F. F., Ab Rashid and Ariff Nijay, Ramli (2023) A new multiobjective tiki-taka algorithm for optimization of assembly line balancing. Engineering Computations. pp. 1-30. ISSN 0264-4401. (In Press / Online First) (In Press / Online First)

M. F. F., Ab Rashid and M. R. M., Rejab and Mon, Daw T.T and N. S. M., Shalahim and Mohd Fazli, Ismail (2009) Virtual Laser-micromachining of MEMS Components. International Journal of Recent Trends in Engineering, 1 (5). pp. 105-109. ISSN 1797-9617. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N., Mohd Rose and S. A., Che Ghani and W. S., Wan Harun (2015) Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process. Applied Mechanics and Materials, 695. pp. 558-561. ISSN 1662-7482. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N. M., Rose (2019) A modified artificial bee colony algorithm to optimise integrated assembly sequence planning and assembly line balancing. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5905-5921. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2015) Simulation Study of a Vehicle Production Line for Productivity Improvement. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1283-1292. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2016) Multi-Objective Optimisation of CNC Milling Process for Al 6061 using Modified NSGA-II. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES 2016) , 5-7 September 2016 , York, United Kingdom. pp. 1-8.. (Unpublished)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and Oumer, A. N. (2022) Modelling and optimization of energy efficient assembly line balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani (2016) Optimization of EDM Small Hole Drilling Process Using Taguchi Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2501-2504. ISSN 1819-6608. (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani and N. M. Z., Nik Mohamed and Ahmad Nasser, Mohd Rose (2014) Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization. Advanced Materials Research, 1043. pp. 65-70. ISSN 1022-6680 (print); 1662-8985 (online). (Published)

M. F. F., Ab Rashid and Wan Mansor, Wan Muhamad and M., Ishak and Mohd Zaidi, Sidek (2005) Design and Simulation Of Robotic Spot Welding System for Automotive Manufacturing Application. In: Proceedings of the 35th International Conference on Computers and Industrial Engineering , 19-22 June 2005 , Istanbul Turkey. pp. 1409-1414..

M. F. F. A., Hamidi and W. S., Wan Harun (2017) Evaluation of mechanical properties for open cellular structure 17-4 PH stainless steel alloy fabricated by selective laser melting process. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 122-123. ISBN 9789670257884

M. F. F. A., Hamidi and W. S., Wan Harun and M., Samykano and S. A., Che Ghani and Z., Ghazalli and F., Ahmad and A. B., Sulong (2017) A Review of Biocompatible Metal Injection Moulding Process Parameters for Biomedical Applications. Materials Science and Engineering: C, 78. pp. 1263-1276. ISSN 0928-4931. (Published)

M. F. F. A., Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and S. A., Che Ghani and M. Z., Azir (2017) Study of Solvent Debinding Parameters for Metal Injection Moulded 316L Stainless Steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012035). ISSN 1757-899X

M. F. M., Sunif and F. R. M., Romlay (2017) Travelling Wave Rotary Ultrasonic Motor with Novel Hollow Segments Stator. International Journal of Control Theory and Applications, 10 (3). pp. 277-282. ISSN 0974-5572. (Published)

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of different processing parameters on the semisolid microstructure of Al6061 produced by a direct thermal method. In: International Conference on Innovative Technology, Engineering and Sciences (ICTES 2020) , 22 December 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. .

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of direct thermal method processing parameters on mechanical properties of semisolid A6061 feedstock. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8585 -8591. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. F. M., Yunoh and S., Abdullah and Z. M., Nopiah and M. Z., Nuawi and Nurazima, Ismail (2012) Fatigue feature classification for automotive strain data. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (1). ISSN 1757-899X

M. H., Abdullah and S. A., Che Ghani and Z., Zaulkafilai and Saiful Nizam, Tajuddin (2017) Development open source microcontroller based temperature data logger. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-13., 257 (1). ISSN 17578981

M. H., Firdaus and A. R., Yusoff and Muhammad Hatifi, Mansor and Mohd Tarmizy, Che Kar (2014) Parametric Study of an Electromagnetic Energy Harvester. Applied Mechanics and Materials, 471. pp. 113-118. ISSN 1662-7482. (Published)

M. H., Lim and W. K., Ngui (2015) Diagnosis of Twisted Blade in Rotor System. In: The 22nd International Congress on Sound and Vibration , 12-16 July 2015 , Italy. pp. 1-7.. (Unpublished)

M. H., Low and M. Mukhtar, N. and Hagos, F. Y. and M. M., Noor (2017) Tri-Fuel Emulsion Fuel Characterization, Stability and The Corrosion Effect. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012082). ISSN 1757-8981 (Print), 1757-899X (Online)

M. H., Mohd Zaki and S. R. A., Idris (2023) A simulation study on interfacial reaction between Sn3Ag0.5Cu and Sn0.7Cu using different substrates after reflow soldering. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 815-824.. ISSN 2195-4356 ISBN 978-981-19-1456-0

M. H., Muhammad Sidik and S. A., Che Ghani (2017) Volume Measuring System Using Arduino for Automatic Liquid Filling Machine. International Journal of Applied Engineering Research (IJAER), 12 (24). pp. 14505-14509. ISSN 0973-4562 (print); 1087-1090 (online). (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and M., Ishak and W. S., Wan Harun and N., Daud (2020) A Review on Electric Wheelchair Innovation to Ease Mobility and As a Rehabilitation Tool for Spinal Cord Impairment Patient. International Journal of Engineering and Technology, 10 (3). pp. 803-815. ISSN 0975-4024. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Mahfodzah, M. Padzi (2019) Development of a wireless surface electromyography (sEMG) signal acquisition device for power-assisted wheelchair system. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3414-3418. ISSN 2249-8958. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Nasir, Meseret and Mahfodzah, M. Padzi (2020) Innovation on Manual Wheelchair for Hemiplegic and Tetraplegic Patients. Journal of Advanced Research in Dynamical & Control Systems, 10 (13S). pp. 1221-1235. ISSN 1943-023X. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Nasir, Meseret and Mahfodzah, M. Padzi (2018) Smart Door Lock System Using Bluetooth Based Android for Smartphone with Door Lock Keypad. Journal of Advanced Research in Dynamical & Control Systems, 10 (13S). pp. 1246-1254. ISSN 1943-023X. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and R. A. R., Maarof (2020) Validation test on thresholds for wheelchair power-assist system activation using population data. International Journal of Advanced Science and Technology, 29 (8S). pp. 4387-4395. ISSN 2005-4238. (Published)

M. H. A., Hassan and Zahari, Taha and Zulfika, Anuar and M. A., Aris (2013) Brain Acceleration During Ball-To-Head Impact in Soccer. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

M. H. M., Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Mahendran, Samykano and E. H., Agung and Cionita, Tezara and Jamiluddin, Jaafar (2017) Effect of alkaline treatment on mechanical properties of woven ramie reinforced thermoset composite. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-6., 257 (1). ISSN 1757-8981

M. H. M., Hamdan and Siregar, J. P. and Tezara, C. and Rusiyanto, R. and Oumer, A. N. and J., Jaafar and M., Zalinawati (2021) Effect of fabric orientations on mechanical properties of hybrid jute-ramie reinforced unsaturated polyester composites. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-13., 700 (1). ISSN 1755-1307

M. H. M., Haniff and Ahmad Rasdan, Ismail and B. M., Deros and M. N. A., Rahman and K., Kadirgama (2011) The Taguchi Approach in Optimizing Environmental Factors Affecting Productivity in the Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 3. pp. 306-317. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. H. M., Hazwan and Z., Shayfull and S., Sharif and S. M., Nasir and Mohd Rashidi, Maarof (2017) Warpage Optimisation on the Moulded Part using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO). In: MATEC Web of Conferences: Engineering Technology International Conference 2016 (ETIC 2016) , 4-5 August 2016 , Ho Chi Mini City, Vietnam. pp. 1-11., 97 (01105). ISSN 2261-236X

M. H. M., Hazwan and Z., Shayfull and S., Sharif and S. M., Nasir and Mohd Rashidi, Maarof (2017) Warpage Optimisation on the Moulded Part with Conformal Cooling Channels using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO). In: 2016 Engineering Technology International Conference, ETIC 2016 , 5 Ogos 2016 , Ho Chi Minh, Vietnam. pp. 1-12., 97. ISSN 2261-236X

M. H. M., Yasin and R., Mamat and A., Aziz and Ahmad Fitri, Yusop and M. H., Ali (2015) Investigation on Combustion Parameters of Palm Biodiesel Operating with a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1714-1726. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. H. M., Yasin and R., Mamat and Ahmad Fitri, Yusop and M. H., Ali and I., Izzudin (2017) Study of Fuel Inlet Temperature Variations on Palm Biodiesel Operating with a Diesel Engine. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01079). ISSN 2261-236X

M. H. N., Izham and M. S. M., Sani (2019) Model updating of frame structure with bolted joints. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

M. H. N., Izham and N. A. Z., Abdullah and Siti Norazila, Zahari and M. S. M., Sani (2017) Structural Dynamic Investigation of Frame Structure with Bolted Joints. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01043). ISSN 2261-236X

M. H. S., Harun and M. F., Ghazali and A. R., Yusoff (2016) Tri-axial Time-frequency Analysis for Tool Failures Detection in Deep Twist Drilling Process. Procedia CIRP, 46. pp. 508-511. ISSN 2212-8271. (Published)

M. Haiqal, Hamdan and Mohd Zuhaifi, Zainol and Zubair, Khalil (2022) Simulation of fault detection system of automotive coil spring by using acoustic method. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 95-104. ISSN 2636-9575. (Published)

M. Hussein, Adnan and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2013) Simulation Study of Turbulent Convective Heat Transfer Enhancement in Heated Tube Flow Using Tio2-Water Nanofluid. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M. I., Hadi and M. R. M., Akramin and M. S., Shaari (2023) Finite element analysis of automotive door hinge. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 3-11.. ISSN 2195-4356 ISBN 978-981191456-0

M. I., Ibrahim and M. R. M., Rejab and N. K., Romli and Quanjin, Ma and M. F., Rani (2023) Effects on hybridization of interlayer composites and self-reinforced polypropylene. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9679 -9688. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. I., Rafiquel and M., Ishak (2014) Modelling and Optimizing of Joint’s Fracture Toughness between A7075-T651 and AZ31B Dissimilar Alloys Welded by GMA Spot Welding Method. Applied Mechanics and Materials, 663. pp. 281-286. ISSN 1662-7482. (Published)

M. I. I., Mahamud and M., Ishak and Aiman, Mohd Halil (2017) Study of Dissimilar Welding AA6061 Aluminium Alloy and AZ31B Magnesium Alloy with ER5356 Filler Using Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-8., 238 (1). ISSN 17578981

M. I. M., Ramli and M. A. F., Romzi and J., Alias and Nur Azhani, Abd Razak (2023) Effect of artificial aging on the microstructure and mechanical properties of AJ62 magnesium alloys. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 339 -348.. ISSN 2195-4356 ISBN 978-981191456-0

M. I. M., Ramli and M. A. F., Romzi and Juliawati, Alias (2021) Effect of surface condition on the corrosion behaviour of AZ31 magnesium alloy. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

M. K., Akasyah and I. M., Yusri and R., Mamat and M. F., Jamlos and A. P. P., Abdul Majeed (2021) Experimental evaluation of tertiary blends of water in diesel with butyl alcohol using compression ignition engine. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-14., 1092 (012072). ISSN 1757-899X

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat (2015) Computational Fluid Dynamics Study of Heat Transfer Enhancement in a Circular Tube using Nanofluid. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-6. ISSN 2289-697X. (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and K. V., Sharma and G., Najafi (2016) Experimental Investigation of Thermal Conductivity and Electrical Conductivity of BioGlycol - Water Mixture Based Al2O3 Nanofluid. Applied Thermal Engineering, 102 (June). pp. 932-941. ISSN 1359-4311. (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and N. M. Zuki, N. M. and G., Najafi (2016) Experimental Investigation of Turbulent Heat Transfer by Counter and Co-Swirling Flow in a Flat Tube Fitted with Twin Twisted Tapes. International Communications in Heat and Mass Transfer, 75. pp. 295-302. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and C. S. N., Azwadi and R., Mamat (2014) Heat Transfer Augmentation in the Straight Channel by Using Nanofluids. Case Studies in Thermal Engineering, 3. pp. 59-67. ISSN 2214-157X. (Published)

M. Kh., Abdolbaqi and C. S. N., Azwadi and R., Mamat and Azmi, W. H. and G., Najafi (2015) Nanofluids Heat Transfer Enhancement Through Straight Channel Under Turbulent Flow. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2294-2305. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. Kh., Abdolbaqi and N. A. C., Sidik and Azmi, W. H. and R., Mamat (2016) An Experimental Determination of Thermal Conductivity and Electrical Conductivity of Bio Glycol Based Al2O3 Nanofluids and Development of New Correlation. International Communications in Heat and Mass Transfer, 73. pp. 75-83. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Amir, Aziz and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) An Experimental Determination of Thermal Conductivity and Viscosity of BioGlycol/water based TiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 22-32. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Mohd Fadzil, Abdul Rahim and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) Experimental Investigation and Development of New Correlation for Thermal Conductivity and Viscosity of BioGlycol/water based SiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 54-63. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat and Azmi, W. H. and Hind, M. Kh. (2016) Experimental and Numerical Investigation of Heat Transfer Augmentation Using Al2o3-Ethylene Glycol Nanofluids Under Turbulent Flows in a Flat Tube. Jurnal Teknologi (Sciences and Engineering), 78 (9-2). pp. 39-44. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and R., Mamat and Azmi, W. H. (2015) Experimental and Numerical Study of Thermo-Hydraulic Performance of Circumferentially Ribbed Tube with Al2O3 Nanofluid. International Communications in Heat and Mass Transfer, 69. pp. 34-40. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and R., Mamat and Azmi, W. H. (2015) Experimental and numerical study of thermo-hydraulic performance of circumferentially ribbed tube with Al2O3 nanofluid. International Communications in Heat and Mass Transfer, 69. pp. 34-40. ISSN 0735-1933. (Published)

M. M., Noor (2010) Experimental mnd Modeling Investigation of The Performance Characteristics on Diesel Hcci with Hydrogen Additive- A Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Noor and Andrew P., Wandel and T. F., Yusaf (2012) MILD Combustion: A Technical Review Towards Open Furnace Combustion. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . pp. 79-100..

M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) Detail Guide for Cfd on the Simulation of Biogas Combustion in Bluff-Body Mild Burner. In: International Conference on Mechanical Engineering Research (ICMER2013), , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-25.. (Unpublished)

M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) The Development of Mild Combustion Open Burner Experimental Setup. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-20.. (Unpublished)

M. M., Noor and K., Kadirgama and Julie J., Mohamed and M. R. M., Rejab (2008) Analysis of Connecting Rod Based on Finite Eliment Approach. In: Malaysian Technical Universities Conference on Engineering and Technology , 8-10 March 2008 , Putra Palace, Perlis, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani (2008) Development of Auto Car Jack Using Internal Car Power. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and R. A., Bakar and T. T., Mon (2009) Development of Statistical Model to Predict Ra and Rz in the Laser Cutting. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and K. F., Muhamad (2009) Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets. Advanced Materials Research. ISSN 1022-6680. (Published)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and M. M., Rahman and T. T., Mon (2009) The Effect of End Milling Parameters on Surface Roughness when Machining Corrosion Resistance Alloy. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Tool Life Analysis By Partial Swarm Optimisation. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia.. . (Unpublished)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Student Performance Analysis Using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Noor and M. M., Rahman and K., Kadirgama (2011) Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining. Advanced Materials Research, 264-26. pp. 956-961. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Recycle Method using Relevance Vector Machine. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. R. M., Rejab and Z., Ghazalli and M. A., Hassan (2008) Developing a Cutting Tool with Mild Steel for Printed Circuit Board. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. .

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. A., Maleque (2011) Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and R. A., Bakar and K., Kadirgama (2011) Linear Static Response of Suspension Arm based on Artificial Neural Network Technique. Advanced Materials Research, 213 (2. pp. 419-426. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2008) An Investigation into the Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure Based on Fea. Research Journal of Applied Sciences, 3 (1). pp. 10-15. ISSN 1815-932X. (Published)

M. M., Noor and M. R. M., Rejab and K., Kadirgama and F. R. M., Romlay and R., Daud (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of the 2nd Regional Engineering Conference on Sustainable Engineering Infrastructures Development and Management , 18-19 December 2008 , Kuching, Sarawak. pp. 33-38..

M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2011) Identification of Dynamics Modal Parameter for Car Chassis. Materials Science and Engineering, 17 (1). ISSN 1757-899X. (Published)

M. M., Noor and T. F., Yusaf (2011) Implementation of Conditional Moment Closure using the Taylor Expansion and Finite Differences. In: International Conference of Mechanical Engineering Research (ICMER) 2011 , 5-7 Dec, 2011 , Malaysia. . (Unpublished)

M. M., Noor and T. F., Yusaf (2011) Study of Random Particle Interactions for Analysis of Diffusion Lengths in Turbulent Combustion Modelling. In: Australian Combustion Symposium , 29 Nov- 1 Dec 2011 , University of Newcastle. .

M. M., Noor and T. T., Mon and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab (2009) Drilling on Fibre-Glass Composite using CO2 Laser. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. M., Noor and Talal, Yusaf and Wandel, Andrew P. (2013) Mild Combustion: The Future for Lean and Clean Combustion. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-15..

M. M., Noor and Wandel, Andrew P. (2012) Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner. In: Southern Regional Engineering Conference (SREC 2012) , 1-2 September 2012 , Toowoomba, Australia. .

M. M., Noor and Wandel, Andrew P. and T. F., Yusaf (2012) A Preliminary Study of Control Parameters for Open Furnace Mild Combustion Using CFD. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . .

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) The Analysis of Recirculation Zone and Ignition Position of Non-Premixed Bluff-Body for Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1176-1186. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2014) MILD Combustion: The Future for Lean and Clean Combustion Technology. International Review of Mechanical Engineering (IREME), 8 (1). pp. 251-257. ISSN 1970-8734 (print); 1970-8742 (cd-rom). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Numerical Study of Oxygen Dilution and Temperature Distribution of Biogas Combustion in Bluff-Body MILD Burner. In: Proceedings of the Australian Combustion Symposium , November 6-8, 2013 , The University of Westerm Australia. .

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2013) Discretization of Three Dimensional Non-Uniform Grid: Conditional Moment Closure Elliptic Equation Using Finite Difference Method. In: Proceedings of the 3rd Malaysian Postgraduate Conference (MPC) 2013 , 4-5 July 2013 , Sydney, Australia. pp. 48-60..

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) The Modelling of The Effect of Air Fuel Ratio on Unburned Hydrocarbons for MILD Combustion. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . .

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) A Review of Mild Combustion and Open Furnace Design Consideration. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 730-754. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) The Study of Air Fuel Ratio for Open Furnace MILD Combustion of Biogas on Bluff-body Burner. In: Southern Regional Engineering Conference (SREC 2012) , 1-2 September 2012 , Toowoomba, Australia. .

M. M., Noor and R., Daud and K., Kadirgama and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of Turret Punch Cutting Tool Using Reverse Engineering Method. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. M., Rahman and A., Zulkifli and A. K., Ariffin (2011) Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine Under Hyperextension Loading. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and A. A., Adebisi and M. A., Maleque (2011) Metal Matrix Composite Brake Rotor: Historical Development and Product Life Cycle Analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 471-480. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and A. K., Ariffin and S., Abdullah (2007) Finite Element Based Vibration Fatigue Analysis Of A New Two-Stroke Linear Generator Engine Component. Mechanical Engineering Research Journal, 2 (1). pp. 63-74. ISSN 1823-0334. (Published)

M. M., Rahman and A. K., Ariffin and S. M., Beden and S., Abdullah (2008) Fatigue Life Assessment for Metallic Structure: A Case Study of Shell Structure under Variable Amplitude Loading. Journal of Applied Sciences , 8 (9). pp. 1622-1631. ISSN 1812-5654. (Published)

M. M., Rahman and Ibrahim, Tamir K. (2014) Effect of the Compression Ratio on the Performance of Different Strategies of the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1747-1757. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama (2014) Performance of Water-Based Zinc Oxide Nanoparticle Coolant during Abrasive Grinding of Ductile Cast Iron. Journal of Nanoparticles, 2014. pp. 1-7. (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor (2010) Artificial Intelligence Techniques for Machining Performance: a Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab and S. A., Kesulai (2009) Fatigue Life Prediction of Lower Suspension Arm Using Strain-Life Approach. European Journal of Scientific Research, 30 (3). pp. 437-450. ISSN 1450-216X. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Influence of Engine Speed and Injection Timings on In-Cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Modeling of Material Removal on Machining of Ti-6Al-4V through EDM using Copper Tungsten Electrode and Positive Polarity. International Journal of Mechanical and Materials Engineering, 1 (3). (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2011) Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach. Advanced Materials Research, 152-15. pp. 1595-1602. ISSN 1022-6680. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Z., Husin (2010) Prediction of Fatigue Life on Lower Suspension Arm Subjected To Variable Amplitude Loading. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and M. R. M., Rejab and M. S. M., Sani and K., Kadirgama (2008) Study Of Air Fuel Ratio On Engine Performance Of Direct Injection Hydrogen Fueled Engine. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. .

M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin (2009) Durability Assessment of Cylinder Block for Two Stroke Free Piston Linear Engine using Random Loading. American Journal of Applied Sciences, 6 (4). pp. 726-735. ISSN 1546-9239. (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin and S., Abdullah and M. A., Maleque (2009) Assessment of Surface Treatment on Fatigue Life of Cylinder Block for Linear Engine using Frequency Response Approach. American Journal of Applied Sciences, 6 (4). pp. 715-725. ISSN 1546-9239. (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and K., Kadirgama (2009) Modeling and Engine Performance of Direct Injection Hydrogen Fueled Engine. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Rahman and M. R. M., Rejab and K., Kadirgama and M. M., Noor and A. K., Ariffin (2009) Multiaxial Fatigue Behavior of Cylinder Head for a Free Piston Linier Engine. Journal of Applied Sciences , 9 (15). ISSN 1812-5654. (Published)

M. M., Rahman and R. A., Bakar (2009) Effect of Air Fuel Ratio on Engine Performance of Single Cylinder Port Injection Hydrogen Fueled Engine: A Numerical Study. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. .

M. M., Rahman and R. A., Bakar and M. M., Noor and K., Kadirgama (2010) Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine. European Journal of Technology and Advanced Engineering Research, 1. pp. 20-29. ISSN 1433-2248. (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and J. M., Julie (2009) Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure based on FEA Approach. American Journal of Applied Sciences, 6 (1). pp. 137-142. ISSN 1546-9239. (Published)

M. M., Rahman and R. A., Bakar and M. S. M., Sani and M. M., Noor (2008) Investigation Into Surface Treatment On Fatigue Life For Cylinder Block Of Linear Engine Using Frequency Response Approach. In: 15th International Congress on Sound and Vibration (ICSV 15) , 6-10 July 2008 , Daejeon, Korea. . (Unpublished)

M. M., Rahman and S., Abdullah and A. K., Ariffin and N. A., Al-Asady (2008) A Review on Finite Element Analysis Approaches in Durability Assessment of Automotive Components. Journal of Applied Sciences, 8 (12). pp. 2192-2201. ISSN 1812-5654. (Published)

M. M., Rahman and Thamir K., Ibrahim (2014) Effective Parameters on Performance of Multipressure Combined Cycle Power Plants. Advances in Mechanical Engineering, 2014. pp. 1-13. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

M. M., Rahman and Thamir K., Ibrahim (2010) Effects of Operation Conditions on Performance of a Gas Turbine Power Plant. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Hasan and M. M., Rahman and K., Kadirgama (2015) A Review on Homogeneous Charge Compression Ignition Engine Performance using Biodiesel–Diesel Blend as a Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2199-2211. ISSN 1985-9325(Print); 2180-1606(Online). (Published)

M. M., Hasan and M. M., Rahman (2016) Homogeneous Charge Compression Ignition Combustion: Advantages Over Compression Ignition Combustion, Challenges and Solutions. Renewable and Sustainable Energy Reviews, 57. pp. 282-291. ISSN 1364-0321. (Published)

M. M., Hasan and M. M., Rahman and K., Kadirgama and D., Ramasamy (2018) Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine. Applied Thermal Engineering, 128. pp. 1464-1475. ISSN 1359-4311. (Published)

M. M., Hasan and M. M., Rahman and M. Nomani, Kabir and Abdul Adam, Abdullah (2017) Numerical Study on the Combustion and Performance Characteristics of a HCCI Engine Resulting from the Autoignition of Gasoline Surrogate Fuel. Journal of Energy Engineering , 143 (5). pp. 1-10. ISSN 0733-9402. (Published)

M. M., Hatifi and M. F., Hassan and A. R., Yusoff (2011) Simulation Study of Cutting Tool System Using Intelligent Active Force Control. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 62-74. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thickness Using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thicknesses using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor (2021) The Importance of Moderate or Intense Low Oxygen Dilution MILD Combustion and The Impact on The Global Warming. FTKMA Bulletin (2). p. 16. ISSN 2773-594X

M. M., Noor and A., Sulaiman and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and F. R. M., Romlay and R., Daud and Z., Ghazalli and D., Ramasamy and M. F., Ghazali and W. S., Wan Harun and M. Y., Taib (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of EnCon2008: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , 18-19mDecember 2008 , Kuching, Sarawak, Malaysia. pp. 1-6..

M. M., Noor and A. Aziz, Hairuddin and Wandel, Andrew P. and Yusaf, T. F. (2012) Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-17., 36 (1). ISSN 1757-899X

M. M., Noor and K., Kadirgama (2009) Response Surface Method and Neural Network to Determine Surface Roughness for Laser Cutting on Acrylic Sheets. In: 12th Cirp Conference On Modelling Of Machining Operations , 7-8 May 2009 , San Sebastian (Spain). . (Unpublished)

M. M., Noor and K., Kadirgama and A. K., Amiruddin and K. V., Sharma (2011) The Potential of Wind and Solar Energy in Malaysia East Coast: Preliminary Study at Universiti Malaysia Pahang (UMP). In: Energy and Sustainability 2011 , 11 - 13 April 2011 , Alicante, Spain. . (Unpublished)

M. M., Noor and K., Kadirgama and A. M., Hussein (2017) Nanoparticles Suspended in Ethylene Glycol Thermal Properties and Applications: An Overview. Renewable and Sustainable Energy Reviews, 69. pp. 1324-1330. ISSN 1364-0321. (Published)

M. M., Noor and K., Kadirgama and Aidy, Ali and M. M., Rahman and Z., Ghazalli (2009) Prediction of End-of-Life Strategies for Household Equipments Using Artificial Intelligent. American Journal of Applied Sciences, 6 (10). pp. 1838-1844. ISSN 1546-9239 (print); 1554-3641 (online). (Published)

M. M., Noor and K., Kadirgama and D., Ramasamy and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of A High Pressure Compressed Natural Gas Mixer for A 1.5 Litre CNG-Diesel Dual Engine. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and D., Ramasamy and M. S. M., Sani (2008) CFD Simulation And Validation Of The In-Cylinder Within A Motored Two Stroke Si Engine. In: International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and H. H., Habeeb and B., Mohammad (2010) Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy. International Journal of Material Forming, 3 (1). pp. 475-478. (Published)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and R. A., Bakar (2009) Artificial Intelligent Model to Predict Surface Roughness in Laser Machining. In: International Conference on Recent Advances in Materials, Minerals & Environment (RAMM’09), , 1-3 June 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. .

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15. pp. 1909-1914. ISSN 1022-6680. (Published)

M. M., Noor and T. T., Mon and K., Kadirgama and R. A., Bakar (2009) Finite Element Analysis on Thermal Effect of the Vehicle Engine. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2014) The Simulation of Biogas Combustion in a Mild Burner. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 995-1013. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2014) Air Fuel Ratio Study For Mixture Of Biogas And Hydrogen On Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2144-2154. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2014) Effect Of Air-Fuel Ratio on Temperature Distribution and Pollutants For Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1980-1992. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Quazi and M., Ishak and M. A., Fazal and A., Arslan and Rubaiee, Saeed and M. H., Aiman and Qaban, Abdullah and Farazila, Yusof and T., Sultan and M. M., Ali and S. M., Manladan (2021) A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications. Critical Reviews in Solid State and Materials Sciences, 46 (2). pp. 109-151. ISSN 1040-8436. (Published)

M. M., Rahman (2012) Modeling of Machining Parameters of Ti-6Al-4V for Electric Discharge Machining: A Neural Network Approach. Scientific Research and Essay , 7 (8). pp. 881-890. ISSN 1992-2248. (Published)

M. M., Rahman and Chowdhury, M. A. and Nuruzzaman, D. M. and Debnath, U. K. and Kowser, M. A. and Roy, B. K. (2016) Deposition Rates on Stainless Steel Substrates of Different Surface Roughnesses Under Different Operating Conditions using Thermal CVD. International Journal of Surface Science and Engineering, 10 (3). pp. 282-302. ISSN 1749-7868. (Published)

M. M., Rahman and D., Ramasamy and K., Kadirgama and M. R., Shukri (2015) Artificial Neural Network Optimization Modeling On Engine Performance Of Diesel Engine Using Biodiesel Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2332-2347. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and Hamada, Khalaf I. and K., Kadirgama (2011) Heat transfer of intake port for hydrogen fueled port injection engine: A steady state approach. International Journal of Physical Sciences, 6 (16). pp. 3969-3976. ISSN 1992-1950. (Published)

M. M., Rahman and K., Kadirgama and Azma Salwani, Ab Aziz (2014) Artificial neural network modeling of grinding of ductile cast iron using water based sio2 nanocoolant. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1649-1661. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor (2015) Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2471-2483. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2016) Optimization of Abrasive Machining of Ductile Cast Iron Using Tio2 Nanoparticles: A Multilayer Perceptron Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2529-2534. ISSN 1819-6608. (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor and R. A., Bakar and M. A. R., Khan (2011) Experimental Investigation into Electrical Discharge Machining of Stainless Steel 304. Journal of Applied Sciences , 11 (3). pp. 549-554. ISSN 1812-5654. (Published)

M. M., Rahman and Kamal, M. (2017) Fatigue Life Prediction of Titanium Alloy for Block Loading Using The Hybrid Approach of Critical Plane and Continuum Damage Mechanics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 4080-4096. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Rahman and Khalaf, I. Hamada and A. Rashid, A. Aziz (2012) Characterization Of The Time-Averaged Overall Heat Transfer In A Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (11). pp. 4816-4830. ISSN 0360-3199. (Published)

M. M., Rahman and Khalaf I., Hamada and K., Kadirgama and R. A., Bakar (2012) Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine. Scientific Research and Essay , 7 (8). pp. 891-902. ISSN 1992-2248. (Published)

M. M., Rahman and M. M., Hasan (2017) Performance and Emission Characteristics of Biodiesel–Diesel Blend and Environmental and Economic Impacts of Biodiesel Production: A Review. Renewable and Sustainable Energy Reviews, 74. pp. 938-948. ISSN 1364-0321. (Published)

M. M., Rahman and M. M., Noor and A. K., Ariffin and Ummu Kulthum, Jamaludin and S., Abdullah (2008) Finite Element Based Fatigue Life Prediction of a New Free Piston Engine Mounting. Journal of Applied Sciences , 9 (8). pp. 1612-1621. ISSN 1812-5654. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Khan, Md. Ashikur Rahman (2011) Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method. Advanced Materials Research, 213 (2. pp. 402-408. ISSN 1022-6680. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and M. R. M., Rejab (2009) Finite Element Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

M. M., Rahman and M. M., Noor and R. A., Bakar and M. A., Maleque and A. K., Ariffin (2008) Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine Using Stress-Life Approach. Journal of Applied Sciences , 8 (19). pp. 3316-3327. ISSN 1812-5654. (Published)

M. M., Rahman and R. A., Bakar (2008) Assessment of Fatigue Life Behaviour of Cylinder Block for Free Piston Engine Using Frequency Response Approach. Research Journal of Applied Sciences, 3 (1). pp. 32-34. ISSN 1815-932X. (Published)

M. M., Rahman and R. A., Bakar and A. K., Ariffin and Ummu Kulthum, Jamaludin and C. H. C., Haron (2008) Fatigue Life Prediction of Two-Stroke Free Piston Engine Mounting Using Frequency Response Approach. European Journal of Scientific Research, 22 (4). pp. 480-493. ISSN ISSN 1450-216X. (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. R. M., Rejab and M. S. M., Sani (2008) Fatigue Life Prediction of Spot-Welded Structures: A Finite Element Analysis Approach. European Journal of Scientific Research, 22 (3). pp. 444-456. ISSN ISSN 1450-216X. (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and M. R. M., Rejab (2007) Fatigue Analysis of Spot-Welded Joints using Finite Element Analysis Approach. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. . (Unpublished)

M. M., Razali and M. F. F., Ab Rashid and M.R.A., Make (2017) Optimization of mixed-model assembly line balancing problem with resource constraints. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 115-117. ISBN 9789670257884

M. M., Ruslan and M. F., Hassan (2022) Unbalance failure recognition using recurrent neural network. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). pp. 9668-9680. ISSN 2180-1606. (Published)

M. Mukhtar, N. A. and Abd Rashid, Abd Aziz and Hagos, F. Y. and M. M., Noor and K., Kadirgama and R., Mamat and Abdul Adam, Abdullah (2019) The influence of formulation ratio and emulsifying settings on tri-fuel (diesel–ethanol–biodiesel) emulsion properties. Energies, 12 (9). pp. 1-24. ISSN 1996-1073. (Published)

M. N., Harith and R. A., Bakar and D., Ramasamy and K., Kadirgama and Ma, Quanjin (2018) A study of waste and delivery valve design modification to the pump performance. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-12., 342 (012090). ISSN 1757-8981 (Print), 1757-899X (Online)

M. N., Mat Nawi and Alzaghir, A. F. and H., Husin and Gebremariam, M. A. and Mohd Azmir, Mohd Azhari (2023) Effect of waterjet cleaning parameters during paint removal operation on automotive steel components. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 31-38. ISSN 2636-9575. (Published)

M. N. A., Mukhtar and Hagos, F. Y. and M. M., Noor and R., Mamat and Abdul Adam, Abdullah and Abd Rashid, Abd Aziz (2019) Tri-fuel emulsion with secondary atomization attributes for greener diesel engine – a critical review. Renewable and Sustainable Energy Reviews, 111. pp. 490-506. ISSN 1364-0321. (Published)

M. N. A. M., Asri and N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2019) Normal mode finite element analysis of aerofoil wing structure with different materials. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

M. N. M., Husnain and M. R. M., Akramin and Z. L., Chuan (2019) Surface crack growth prediction under fatigue load using the S-version Finite Element Model (S-FEM). In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012011). ISSN 1757-899X

M. N. M., Merzuki and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and M. F., Rani and Salwani, Mohd Salleh (2018) Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-6., 318 (012072). ISSN 1757-8981

M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma (2019) Experimental investigation of free vibration analysis on fibre metal composite laminates. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5753-5763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma and Wan, Rafizi (2019) Investigation of modal analysis on glass fiber laminate aluminium reinforced polymer: An experimental study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012065). ISSN 1757-899X

M. N. M., Salleh and M., Ishak and M. H., Aiman and M. M., Quazi and A. M., Hanafi (2019) Weld Geometry Investigation on Dissimilar Boron Steel Laser Welded for TWB Application. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7364-7374. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. N. M., Salleh and M., Ishak and M. M., Quazi (2023) A brief overview on the utilization of high strength steel (HSS) for automotive structural welding applications. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 279 -288.. ISSN 2195-4356 ISBN 978-981191456-0

M. N. M., Salleh and M., Ishak and M. M., Quazi and Aiman, Mohd Halil (2018) Microstructure, mechanical, and failure characteristics of laser-microwelded AZ31B Mg alloy optimized by response surface methodology. The International Journal of Advanced Manufacturing Technology, 9 (1-4). pp. 985-1001. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M. Nafis, O. Z. (2014) Computer Numerical controlled (CNC) machine for rapid manufacturing processes. PhD thesis, Loughborough University (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Cutting Tools in Finishing Operations for CNC Rapid Manufacturing Processes: Simulation Studies. In: Advances in Manufacturing Technology XXVIII: Proceedings of the 12 th International Conference on Manufacturing Research (ICMR2014) , 9-11 September 2014 , Southampton Solent University. pp. 163-168.. ISBN 978-0-9926958-4-2

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2015) End Mill Tools Integration in CNC Machining for Rapid Manufacturing Processes: Simulation Studies. Production & Manufacturing Research, 3 (1). pp. 274-288. ISSN 2169-3277. (Published)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Optimization of Roughing Operations in CNC Machining for Rapid Manufacturing Processes. Production & Manufacturing Research, 2 (1). pp. 519-529. ISSN 2169-3277. (Published)

M. Nafis, O. Z. and Nafrizuan, Mat Yahya and Munira, Ali and Kartina, Johan (2012) Review on CNC-rapid prototyping. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012032). ISSN 1757-899X

M. Nazrul, H. M. Bahrudin and M. Mukhtar, N. A. and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Zainal Ambri, Abdul Karim (2019) Comparison between tri-fuel (diesel-ethanol-biodiesel) emulsion with and without surfactant. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-12., 2059 (020056). ISBN 978-0-7354-1787-8

M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. R. M., Rejab and K., Kadirgama and M. M., Noor and M. S. M., Sani (2008) Modification And Testing Of Four Axes Filament Winding Machine. In: Proceeding of International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 December 2008 , UiTM, Penang. .

M. R. M., Rejab and M. M., Noor and K., Kadirgama and M. M., Rahman and Z., Ahmad@Manap and M. S. M., Sani and R., Daud (2009) An Investigation of Profiles for Plate Cams with Vertical In-line Roller Followers. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. R. M., Rejab and M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2009) Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angles. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. R. M., Rejab and M. M., Noor and R., Daud and K., Kadirgama and M. S. M., Sani (2009) Effect of Adverse Environment on Buckling of Composite Laminates. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. R. M., Rejab and M. M., Rahman and K., Kadirgama and M. M., Noor (2008) Effect of Multiaxial Testing on Polymeric Foams Performance for Shear-Compressive Loading. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , December 18 -19 , Kuching Sarawak, Malaysia. .

M. R. M., Rejab and M. M., Rahman and M. M., Noor and A. N. M., Rose (2008) An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis. .

M. R. M., Rejab and N. M. Zuki, N. M. and M. M., Noor (2008) Strain Rate Effects of Polymeric Foam Cores Under Compressive Loading. In: Proceeding of Science, Technology and Social Science Conference (STSS) . pp. 267-275..

M. R. M., Akramin and A. K., Ariffin and Kikuchi, Masanori and S., Abdullah (2017) Sampling Method in Probabilistic S‑version Finite Element Analysis for Initial Flaw Size. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (1). pp. 357-365. ISSN 1678-5878 (Print); 1806-3691 (Online). (Published)

M. R. M., Akramin and Ahmad Kamal, Ariffin and Kikuchi, Masanori and S., Abdullah and N., Nik Abdullah (2014) Fatigue Crack Growth Analysis of Semielliptical Surface Crack. Applied Mechanics and Materials, 471. pp. 293-298. ISSN 1662-7482. (Published)

M. R. M., Akramin and M. N. M., Husnain and Z. L., Chuan and Takahashi, Akiyuki (2020) Fatigue crack growth analysis using Bootstrap S‑version finite element model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (184). pp. 1-21. ISSN 1806-3691. (Published)

M. R. M., Akramin and M. S., Shaari and A. K., Ariffin and Masanori, Kikuchi and S., Abdullah (2015) Surface Crack Analysis Under Cyclic Loads Using Probabilistic S-Version Finite Element Model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (6). pp. 1851-1865. ISSN 1806-3691. (Published)

M. R. M., Nawi and M. Z. A., Rehim and Azmi, W. H. and S. A., Razak (2018) The characterization and thermo-physical property investigations of SiO2/HFE7000 nanorefrigerants. International Journal of Refrigeration, 88. pp. 275-283. ISSN 0140-7007. (Published)

M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and A. F., Jusoh and N. Z. M., Zaid and W. J., Cantwell (2016) The Mechanical Behaviour of Foam-filled Corrugated Core Sandwich Panels In Lateral Compression. In: Proceedings of the American Society for Composites 2016 , 19-22 September 2016 , Williamsburg, Virginia, USA. .

M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and Paruka, P. and S. H. S. M., Fadzullah and Zhang, B. and Cantwell, W. J. (2016) The Mechanical Behavior of Foam-filled Corrugated Core Sandwich Panels in Lateral Compression. In: Proceedings of the American Society for Composites 2016: Thirty-First Technical Conference on Composite Materials , 19-22 September 2016 , Williamsburg, Virginia. pp. 1-17.. ISBN 978-1-60595-316-8

M. R. M., Rejab and Cantwell, W. J. (2013) The Mechanical Behaviour of Corrugated-Core Sandwich Panels. Composites Part B: Engineering, 47. pp. 267-277. ISSN 1359-8368. (Published)

M. R. M., Rejab and Ma, Quanjin and M. S., Idris and Mohamad Nazirul Mubin, Merzuki (2018) i -Winder: portable filament winding machine. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. . (Unpublished)

M. R. M., Rejab and Mohammad Hazim, Mohamad Hamdan and Quanjin, Ma and Siregar, J. P. and Bachtiar, Dandi and Muchlis, Yusrizal (2020) Historical development of hybrid materials. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier, pp. 445-455. ISBN 978-0-12-813196-1

M. R. M., Rejab and N. Z. M., Zaid and J. P., Siregar and Bachtiar, Dandi (2016) Scaling Effects for Compression Loaded of Corrugated-core Sandwich Panels. Advanced Materials Research, 1133. pp. 241-245. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. R. M., Rejab and S. H. S. M., Fadzullah and K. A., Kamarudin and F., Mat (2015) Numerical Modelling of Triangular Corrugated-core Sandwich Panel subjected to Impact Loading. In: Proceeding Book MUCET 2014: Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 374-378., 1.

M. R. M., Rejab and W. A. W., Hassan and J. P., Siregar and Bachtiar, Dandi (2014) Specific Properties of Novel Two-Dimensional Square Honeycomb Composite Structures. Applied Mechanics and Materials, 695. pp. 694-698. ISSN 1662-7482. (Published)

M. R. R., Chand and F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Afzam, Zulkepli (2016) A Study on Energy Consumption of a Resort Located in the East Coast of Malaysia. International Journal of Advanced and Applied Sciences, 3 (5). pp. 49-54. ISSN 0973-4562 (Print); 0973-9769 (Online). (Published)

M. R. R., Chand and Hassan, Ibrahim and Zafri, Azran and Azim, Arshad and F., Basrawi (2016) Review on Recent Development Micro Gas Turbine -Trigeneration System and Photovoltaic Based Hybrid Energy System. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00028). ISSN 2261-236X

M. Razali, Hanipah and Mikalsen, R. and Roskilly, A.P. (2022) The real-time interaction model for transient mode investigations of a dual-piston free-piston engine generator. Applied Thermal Engineering, 212 (118629). pp. 1-28. ISSN 13594311. (Published)

M. S., Shaari and M. M., Rahman and M. M., Noor and K., Kadirgama and A. K., Amiruddin (2010) Design of Connecting Rod of Internal Combustion Engine: a Topology Optimization Approach. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. S., Ali and M. T., Musthafah and A. M., Mohd Shafei and A. M. T., Khairil and N. F. M., Noordin and R. A., Bakar (2016) Performance of Compressed Natural Gas (CNG) Engine with Pre Chamber. In: Proceedings of Mechanical Engineering Research Day 2016 , 31 March 2016 , Universiti Teknikal Malaysia Melaka. pp. 7-8.. ISBN 978-967-0257-70-9 (online)

M. S., Idris and C. S. N., Azwadi and N. M. M., Ammar (2011) Cubic interpolation profile Navier-Stokes numerical scheme for particle flow behaviour in triangular lid driven cavity. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 209-215., 1440 (209). ISSN 0094243X

M. S., Idris and Che Sidik, Nor Azwadi and N. I. N., Izual (2011) Vortex structure in a two dimensional triangular lid-driven cavity. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1078-1084., 1440. ISSN 0094-243X

M. S., Idris and M.Irwan, M. A. and N. M. M., Ammar (2012) Steady State Vortex Structure of Lid Driven Flow Inside Shallow Semi Ellipse Cavity. Journal of Mechanical Engineering and Sciences (JMES) , 2 (Jun. pp. 133-147. ISSN 2231-8380 . (Published)

M. S., Idris and N. M. M., Ammar and T. M. Y. S., Tuan Ya and A. M., Amin (2013) Transient Semi-Circular Lid-Driven Cavity Flow Using Nonuniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S., Idris and N. M. M., Ammar and Tuan Mohammad Yusoff, Tuan Ya and At-Tasneem, Mohd Amin (2013) Transient Semi Circular Lid Driven Cavity Flow Using Non Uniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) Interaction effect of machining parameters on material removal rate in machining of AA6061–T6 using MQL conditions. In: 7th International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2019) , 7-11 December 2019 , RMIT University, Melbourne, Australia. pp. 1-7.. (Unpublished)

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) An experimental study to evaluate the flank wear interaction with process parameters during machining of aluminium alloy under minimum quantity lubrication with TiO2 nanofluid. In: International Meeting On Collaboration Technologies 2019 (IMCT 2019) , 14 - 18 Julai 2019 , Yogyakarta, Indonesia. pp. 1-6.. (Unpublished)

M. S., Norhidayah and N. M. Zuki, N. M. and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00014). ISSN 2261-236X

M. S., Reza and S. N., Aqida and I., Ismail (2016) Interface Bonding of NiCrAlY Coating on Laser Modified H13 Tool Steel Surface. Applied Physics A, 122 (611). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

M. S., Shaari and A. K., Ariffin and Akiyuki, Takahashi and M. R. M., Akramin and S., Abdullah and M. N., M. Husnain (2019) Fatigue crack growth prediction using S-version finite element method for AlSi10Mg: an additive manufacturing material. In: 11th International Conference on Numerical Analysis In Engineering (NAE 2019) , 20-22 August 2019 , Bangi, Malaysia. pp. 1-12.. (Unpublished)

M. S., Shaari and M. R. M., Akramin and A. K., Ariffin and S., Abdullah and Masanori, Kikuchi (2016) Prediction of Fatigue Crack Growth for Semi-Elliptical Surface Cracks using S-version Fem under Tension Loading. Journal of Mechanical Engineering and Sciences (JMES) , 10 (3). pp. 2375-2386. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S. A., Rahim and I., Ismail (2015) Review of Magnetorheological Fluids and Nanofluids Thermal Behaviour. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (012040). ISSN 1757-899X

M. S. A., Rahim and I., Ismail and S. A., Wahid and S. N., Aqida (2017) Magnetic Field Simulation of a Thermal Conductivity Measurement Instrument for Magnetorheological Fluid. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01061). ISSN 2261-236X

M. S. A., Rahim and Izwan, Ismail and Choi, S. B. and Azmi, W. H. and S. N., Aqida (2017) Thermal Conductivity Enhancement and Sedimentation Reduction of Magnetorheological Fluids with Nano-Sized Cu and Al Additives. Smart Materials and Structures, 26 (115009). pp. 1-11. ISSN 0964-1726. (Published)

M. S. M., Sani and Che Ku Eddy Nizwan, Che Ku Husin and M. M., Noor (2008) Experimental Heat Transfer Study On The Shock Absorber Operation. In: International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished)

M. S. M., Sani and M. M., Noor and M. H. A., Rasid and M. R. M., Rejab and K., Kadirgama and M. M., Rahman (2009) Experimental Study On Noise Source Identification Of Split Unit Air Conditioner System. In: International Conference on Advance Mechanical Engineering (ICAME09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. S. M., Sani and M. M., Noor and M. R. M., Rejab and A. S., Sulaiman (2008) Assessment of The Mechanical Engineering Programs by Exit Surveys at Universiti Malaysia Pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

M. S. M., Sani and M. M., Noor and M. S. M., Zainury and K., Kadirgama and M. R. M., Rejab and M. M., Rahman (2009) Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. S. M., Sani and M. M., Noor and T. T., Mon (2009) Stress Analysis And Modal Transient Response Of Car Chassis. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. S. M., Sani and M. M., Rahman and M. M., Noor and K., Kadirgama and G. L., Ming (2008) Dynamic Correlation Technique and Model Updating on Go Kart Chassis Structure. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , December 18 -19, 2008 , Kuching, Sarawak.. . (Unpublished)

M. S. M., Sani and M. M., Rahman and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) Study on Dynamic Characteristics of Automotive Shock Absorber System. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Malaysia . . (Unpublished)

M. S. M., Sani and Ouyang, H. and Cooper, J.E. and Che Ku Eddy Nizwan, Che Ku Husin (2013) Smart Methodology of Stiffness Nonlinearity Identification Vibration System. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished)

M. S. M., Fouzi and M. S. M., Sani (2020) Finite element modeling and updating for dynamic study of exhaust structure. In: 2nd Regional Conference on Mechanical and Marine Engineering, ReMME 2018 , 7 - 9 November 2018 , Ipoh, Malaysia. pp. 305-313.. ISSN 2195-4356 ISBN 9789811500015

M. S. M., Fouzi and M. S. M., Sani (2019) Numerical study to optimize exhaust hanger location based on finite element modelling and model updating. In: International Conference On Computational Science And Information Management , 21 - 23 March 2019 , Lombok Indonesia. pp. 1-13.. (Unpublished)

M. S. M., Ghazali and F. R. M., Romlay and A. A., Ehsan (2021) Manufacturing of polymer-based 1×2 Y-branch symmetric and asymmetric waveguide coupler through moulding technique. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8998 -9005. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Sani and Azmi, W. H. and N. F. D., Razak and Zhang, B. (2019) The effect of change in flowrate on power spectral density (PSD) of automotive radiator system for flow-induced vibration monitoring. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME 2018) , 31 October 2018 , Universiti Malaysia Pahang (UMP)Pekan, Pahang. pp. 1-9., 469 (012101). ISSN 1757-899X

M. S. M., Sani and H., Ouyang (2016) Identification of Nonlinearities in Joints of a Wing Structure. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03006). ISSN 2261-236X

M. S. M., Sani and Izzuddin, Zaman and M. M., Rahman (2015) Analysis of Split Air Conditioner Noise using Sound Intensity Mapping. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 9 (1). pp. 28-33. ISSN 2289-7879. (Published)

M. S. M., Sani and Izzuddin, Zaman and Muhammad, Mohamed Salleh and Maznan, Ismon and Bukhari, Manshoor and Amir, Khalid and Sherif, Araby (2014) Vibration Attenuation of Plate using Multiple Vibration Absorbers. In: Proceedings of the 4th International Conference on Production, Energy and Reliability (ICPER2014) , 3-5 June 2014 , Kuala Lumpur Convention Centre, Kuala Lumpur. pp. 1-6..

M. S. M., Sani and J. M., Zikri and Abdul Adam, Abdullah (2021) Sound intensity mapping on single cylinder direct injection diesel engine with the application of palm oil methyl ester biodiesel. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8833-8844. ISSN 2180-1606. (Published)

M. S. M., Sani and K. M., Jelani and M. H. M., Razip and N. A., Nazri and Yasar, M. (2019) Dynamics investigation on motorcycle chassis based on Finite Element (FE) modelling and updating. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 Oktober 2018 , UNIVERSITI MALAYSIA PAHANG, PEKAN. pp. 1-10., 469 (1). ISSN 1757-8981

M. S. M., Sani and K. M., Jelani and N. A. Z., Abdullah and M. N., Abdul Rani and M. A., Yunus (2023) Finite Element Modelling and Updating of Motorcycle Structure with Suitable Length of Connecting Element. Journal of Acoustics and Vibration Research (JAVR), 1 (1). p. 7689. (Published)

M. S. M., Sani and M. A. F. A., Rahimi and Danial, Mohamed (2019) Sound intensity mapping of two stroke engine by using hemispherical surface coordinate arrangement. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

M. S. M., Sani and M. H. A., Rasid (2014) Experimental Study on Noise Mapping of Split Unit Air Condition System. Auto Inexss, 2014 (8). pp. 15-20. ISSN 1985-8434

M. S. M., Sani and M. H. N., Izham and M. N., Abdul Rani and M. A., Yunus (2019) Damage assessment on frame structure with bolted joints based on experimental modal analysis. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-9., 469 (1). ISSN 1757-8981

M. S. M., Sani and M. M., Rahman and M. Z., Baharom and I., Zaman (2015) Sound Intensity Mapping of an Engine Dynamometer. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2820-2829. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Sani and M. M., Rahman and Zamzuri, Hamedon and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) An Evaluation of Profiles for Disk Cams with In-line Roller Followers. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

M. S. M., Sani and M. M., Zainudin (2008) Dynamic Measurement System for Interchangeable Shock Absorber Test Rig. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 67-74. ISSN 1985-5176. (Published)

M. S. M., Sani and M. S. M., Fouzi and Yusrizal, Muchlis (2019) Finite Element Modelling and updating of welded joint for dynamic study of exhaust structure. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-10., 469 (1). ISSN 17578981

M. S. M., Sani and Muhamad Norhisham, Abdul Rani and Mohd Azmi, Yunus and Ahmad Azlan, Mat Isa and Liyana, Roslan (2015) Force Appropriation Method for Two Degrees of Freedom Nonlinear System. Jurnal Teknologi (Sciences and Engineering), 76 (8). pp. 5-9. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M. S. M., Sani and N., Nubra (2008) Application of Dynamics Modal Testing Fun Kart Chassis. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 1-11. ISSN 1985-5176. (Published)

M. S. M., Sani and N. A., Nazri and M. N., Abdul Rani and M. A., Yunus (2017) Dynamic analysis of I cross beam section dissimilar plate joined by TIG welding. In: International Conference On Electrical, Electronics, Materials and Applied Science (ICEEMAS) , 21-24 December 2017 , Secunderabad, Telangana, Hyderabad, India. pp. 1-7.. (Unpublished)

M. S. M., Sani and N. A., Nazri and S. N., Zahari and N. A. Z., Abdullah and G., Priyandoko (2016) Dynamic Study of Bicycle Frame Structure. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-8., 160 (012009). ISSN 1757-8981 (Print), 1757-899X (Online)

M. S. M., Sani and N. A. Z., Abdullah and Siti Norazila, Zahari and Siregar, J. P. and M. M., Rahman (2016) Finite Element Model Updating of Natural Fibre Reinforced Composite Structure in Structural Dynamics. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03007). ISSN 2261-236X

M. S. M., Sani and Siti Norazila, Zahari and N. I. M., Azmi and S., Musa (2016) Secret to Success: Securing Petronas Vendor Development Program (VDP). In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 113-120.. ISBN 978-967-394-255-8

M. Y., Taib and K., Kadirgama and M. M., Noor and M. S. M., Sani (2009) Performance Analysis of a Domestic Refrigerator in Malaysia using Experimental Method. In: Proceeding of International Conference on Recent and Emerging Advanced Technologies in Engineering (iCREATE 2009) , 23-24 November 2009 , Kuala Lumpur. . (Unpublished)

M. Y., Isafiq and Z., Shayfull and S. M., Nasir and Mohd Rashidi, Maarof and M., Fathullah and N. Z., Noriman (2016) Shrinkage Analysis on Thick Plate Part using Response Surface Methodology (RSM). In: 2nd International Conference on Green Design and Manufacture (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78.

M. Y., Taib and Shahrani, Anuar and Hassan, Ibrahim (2015) A Review of Ground Heat Exchangers for Cooling Application in the Malaysian Climate. Journal of Mechanical Engineering and Sciences (JMES), 8. pp. 1426-1439. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Y., Yuserny and M. H., Aiman and M. M., Quazi and M., Ishak and J., Shamini (2021) Viability of the novel process of indirect laser brazing. Lasers in Engineering, 51 (6). pp. 379-389. ISSN 1029-029X. (Published)

M. Z., Azir and W. S. W., Harun and K., Kadirgama (2020) A mechanical property evaluation of Ti6Al4V cellular lattice structures fabricated by selective laser melting. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-12., 788 (012010). ISSN 1757-8981 (Print), 1757-899X (Online)

M. Z., Sharif (2016) Performance analysis of SiO₂PAG nanolubricant in automotive air conditioning system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Z., Sharif and Azmi, W. H. and A .A. M., Redhwan and R., Mamat and T. M., Yusof (2017) Performance Analysis of Sio2/PAG Nanolubricant in Automotive Air Conditioning System. International Journal of Refrigeration, 75. pp. 204-216. ISSN 0140-7007. (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and N. N. M., Zawawi and R., Mamat (2017) Improvement of nanofluid stability using 4-step UV-vis spectral absorbency analysis. Journal of Mechanical Engineering, S1 4 (2). pp. 233-247. ISSN 1823-5514 (print); 2550-164X (online). (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/PAG Nanolubricant for Application in Automotive Air Conditioning System. International Journal of Refrigeration, 70. pp. 93-102. ISSN 0140-7007. (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat and Najafi, G. (2019) Energy saving in automotive air conditioning system performance using SiO2/PAG nanolubricants. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1285-1297. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat and T. M., Yusof (2017) Performance analysis of SiO2/PAG nanolubricant in automotive air conditioning system. International Journal of Refrigeration, 75. pp. 204-216. ISSN 0140-7007. (Published)

M. Z., Sharif and Azmi, W. H. and Mohamad Redhwan, Abd. Aziz (2016) Effect of Nanolubricant on Evaporator and Condenser Pressure of Automotive Air Conditioning System. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 302-308..

M. Z., Sharif and Azmi, W. H. and R., Mamat and A. I. M., Shaiful (2018) Mechanism for improvement in refrigeration system performance by using nanorefrigerants and nanolubricants - A review. International Communications in Heat and Mass Transfer, 92. pp. 56-63. ISSN 0735-1933. (Published)

M. Z., Sharif and Azmi, W. H. and Redhwan, A. A. M. and Zawawi, N. M. M. (2017) Preparation and Stability of Silicone Dioxide Dispersed in Polyalkylene Glycol based Nanolubricants. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01049). ISSN 2261-236X

M. Z., Yusoff and A. M., Mohseen and A., Al-Falahi and N. H., Shuaib (2012) The Effects of Area Contraction on Shock Wave Strength and Peak Pressure in Shock Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 587-596. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

M. Z. M., Ismail and A. H., Zainal and Nazrul Idzham, Kasim and M. A. F. M., Mukhtar (2019) A mini review: Lean management tools in assembly line at automotive industry. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012086). ISSN 1757-8981 (Print), 1757-899X (Online)

M.A., Mokhri and N.R., Abdullah and S.A., Abdullah and S., Kasalong and R., Mamat (2012) Soot Filtration Recent Simulation Analysis in Diesel Particulate Filter (DPF). Procedia Engineering, 41. pp. 1750-1755. ISSN 1877-7058. (Published)

M.F, Yusoff (2010) Evaluation Of Acoustic Emission Behavior Under Hydrostatic Test In Api 5l X70 Steel Pipe. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M.Kh, Abdolbaqi and Rizalman, Mamat and Nor Azwadi, Che Sidik and Azmi, W. H. and P., Selvakumar (2017) Experimental investigation and development of new correlations for heat transfer enhancement and friction factor of BioGlycol/water based TiO2 nanofluids in flat tubes. International Journal of Heat and Mass Transfer, 108. pp. 1026-1035. ISSN 0017-9310. (Published)

M.N.M., Salleh and M., Ishak and Aiman, Mohd Halil and Q., Zaifuddin and Quazi, M. M. (2020) The effect of laser surface hardening on the surface hardness of mild steel. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-11., 788 (1). ISSN 1757-8981

Ma, Quanjin and Ge, Jia and Mohd Ruzaimi, Mat Rejab and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2021) Fabrication of the carbon fiber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1645-1651., 46 (Part 4). ISSN 2214-7853

Ma, Quanjin and Ge, Jia and Rejab, M. R. M. and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2020) Fabrication of the carbon fiber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. 1645 -1651., 46. ISSN 2214-7853

Ma, Quanjin and Kuai, Tengfei and M. R. M., Rejab and Manoj Kumar, Nallapaneni and M. S., Idris and Abdullah, M. H. (2020) Effect of boundary factor and material property on single square honeycomb sandwich panel subjected to quasi-static compression loading. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). 7348 -7360. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ma, Quanjin and M. R. M., Rejab (2023) The energy-absorbing characteristics of two-dimensional periodic self-reinforced polypropylene (SRPP) sandwich panel. Science Talks, 6 (100170). pp. 1-6. ISSN 2772-5693. (Published)

Ma, Quanjin and M. R. M., Rejab and Kaige, Jiang and M. S., Idris and M. N., Harith (2018) Filament winding technique, experiment and simulation analysis on tubular structure. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-15.. (Unpublished)

Ma, Quanjin and M. R. M., Rejab and M. S., Idris and Bachtiar, Dandi and J. P., Siregar and M. N., Harith (2017) Design and optimize of 3-axis filament winding machine. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012039). ISSN 1757-899X

Ma, Quanjin and M. R. M., Rejab and M. S., Idris and M., Amiruddin and Bachtiar, Dandi and J. P., Siregar and M. I., Ibrahim (2017) Design Of Portable 3-Axis Filament Winding Machine With Inexpensive Control System. In: International UNIMAS STEM Engineering Conference (ENCON 2017) , 13-14 September 2017 , Kuching, Sarawak, Malaysia. pp. 1-11..

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Kumar, A. Praveen and Zhang, Bo and Sun, Bo and Mohamad Nazirul Mubin, Merzuki (2021) Free vibration analysis of two novel spherical-roof contoured cores (SRCC): A numerical study. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1775-1782., 48 (Part 6). ISSN 2214-7853

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohammad, Azeem and Mat Sahat, Idris and M.F., Rani and Kumar, A.Praveen (2023) Axial and radial crushing behaviour of thin-walled carbon fiber-reinforced polymer tubes fabricated by the real-time winding angle measurement system. Forces in Mechanics, 10 (100170). pp. 1-10. ISSN 2666;3597. (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Song, Yiheng and Zhang, Xin and Hanon, Muammel M. and M. H., Abdullah and Kumar, A. Praveen (2024) Effect of infill pattern of polylactide acid (PLA) 3D-printed integral sandwich panels under ballistic impact loading. Materials Today Communications, 38 (107626). pp. 1-6. ISSN 2352-4928. (Published)

Ma, Quanjin and Rejab, M. R. M. and Abu Hassan, Shukur and Hu, Haichao and Kumar, A. Praveen (2022) Potentiality of MWCNT on 3D-printed bio-inspired spherical-roof cubic core under quasi-static loading. Journal of the Mechanical Behavior of Biomedical Materials, 136 (105514). pp. 1-7. ISSN 1751-6161. (Published)

Ma, Quanjin and Rejab, M. R. M. and Azman, O. and Aleem, S. A. A. and Tung, N. A. and Asan, S. K. and Rahim, S. R. A. and Kumar, A. Praveen (2022) Development of the real-time winding angle measurement device for the laboratory-scale 3-axis winding machine. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Ma, Quanjin and Rejab, M. R. M. and Hanon, Muammel M. and Idris, Mat Sahat and Siregar, J. P. (2021) 3D-Printed Spherical-Roof Contoured-Core (SRCC) composite sandwich structures for aerospace applications. In: High-Performance Composite Structures. Composites Science and Technology . Springer, Singapore, pp. 75-91. ISBN 978-981-16-7377-1

Ma, Quanjin and Rejab, M. R. M. and Idris, Mat Sahat and Merzuki, M.N.M. and Shaoliang, Huang (2020) Compressive properties on the spherical-roof contoured-core cell with different amounts of diamond-shaped notches. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (012049). ISSN 1757-8981 (Print), 1757-899X (Online)

Ma, Quanjin and Rejab, M. R. M. and Idris, Mat Sahat and Zhang, Bo and Manoj Kumar, Nallapaneni (2019) Filament winding technique: SWOT analysis and applied favorable factors. SCIREA Journal of Mechanical Engineering, 2 (1). pp. 15-25. (Published)

Ma, Quanjin and Rejab, M. R. M. and Kumar, A. Praveen and Fu, Hao and Manoj Kumar, Nallapaneni and Tang, Jianbo (2021) Effect of infill pattern, density and material type of 3D printed cubic structure under quasi-static loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (19). 4254 -4272. ISSN 0954-4062. (Published)

Ma, Quanjin and Rejab, M. R. M. and Siregar, J. P. and Guan, Zhongwei (2021) A review of the recent trends on core structures and impact response of sandwich panels. Journal of Composite Materials, 55 (18). pp. 2513-2555. ISSN 0021-9983 (print); 1530-793X (online). (Published)

Ma, Quanjin and Rejab, M. R. M. and Sun, Bo and Merzuk, M. N. M. (2021) A brief review of the cubic star on structural design, applications, and future perspective. Journal of Advanced Research in Applied Sciences and Engineering Technology, 24 (1). pp. 10-17. ISSN 2462-1943. (Published)

Ma, Quanjin and Salim, M. S. A. and Rejab, M. R. M. and Bernhardi, Otto-Ernst and Nasution, Ahmad Yunus (2020) Quasi-static crushing response of square hybrid carbon/aramid tube for automotive crash box application. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020 , 6 - 7 March 2020 , Hyderabad, India. 683 -690., 27. ISSN 2214-7853

Madan Varmma, Suparmaniam (2019) Suppression of chatter in high-speed milling machine using spindle speed variation method with microphone feedback PID controlller. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Madderla, Sandhya (2023) Development of water-ethylene glycol based graphene nanoplatelets/cellulose nanocrystal hybrid nanofluid as radiator coolants and its performance evaluation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Devarajan, Ramasamy).

Madihah, Zubir (2012) Effect of dry machining on tool wear. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) A short review of nano-cellulose preparation from textile spinning waste cotton. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-7.. ISBN 978-166541224-7

Mahendra Kumar, Jothi Letchumy and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin (2020) The power level control of a pressurised water reactor nuclear power plant. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 451-455.. ISSN 2195-4356 ISBN 978-981-13-9538-3

Mahendran, Moorthy and H.L., Ong and Lee, Giok Chui and K., Thanikaikumaran (2013) An Experimental comparison study between Single-Axis Tracking and Fixed Photovoltaic Solar Panel Efficiency and Power Output: Case Study in East Coast Malaysia. In: Sustainable Development Conference 2013 , 21-23 June 2013 , Bangkok, Thailand. .

Mahendran, Samykano (2010) Micro-Edm:Overview And Recent Developments. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mahendran, Moorthy and Lee, Giok Chui and Sharma, K. V. and Shahrani, Anuar (2012) Performance Evaluation of Evacuated Tube Solar Collector Using Water-Based Titanium Oxide (TiO2) Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 301-310. ISSN 2231-8380 (online). (Published)

Mahendran, Moorthy and Tanti Zanariah, Shamshir Ali and Shahrani, Anuar and R. A., Bakar (2014) The Efficiency Enhancement on the Direct Flow Evacuated Tube Solar Collector Using Water-Based Titanium Oxide Nanofluids. Applied Mechanics and Materials, 465-46. pp. 308-315. ISSN 1662-7482. (Published)

Mahendran, Samykano (2015) Physical and mechanical characterization of electrodeposited nickel nanowires - influence of current density and external magnetic field. PhD thesis, North Carolina A&T State University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahendran, Samykano and Lee, Giok Chui and Shahrani, Anuar and R. A., Bakar and K., Kadirgama and Amir, Abdul Razak and Sharma, K. V. (2013) Diurnal Pattern and Estimation of Global Solar Radiation in East Coast Malaysia. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Mahendran, Samykano and Md. Mustafizur, Rahman and Kumaran, Kadirgama and Jose, Rajan and Devarajan, Ramasamy and Muhamad, Mat Noor and Nurul Akmal, Che Lah and Pooria, Pasbakhsh (2016) Synthesis and characterization of one dimensional modified cobalt Nanowires for nanoscale mechanical. , [Research Book Profile: Research Report] (Unpublished)

Mahendran, Samykano and R. V., Mohana Sundram and K., Sudhakar and S. G., Ponnabalam (2018) Nickel nanowire: magnetic ordering synthesis. In: International Conference on Advanced Nano Materials (ANM, 2018) , 18 - 20 July 2018 , University of Aveiro, Portugal. p. 1.. (Unpublished)

Mahendran, Samykano and T., Nagarajan and Dr., Majdi and D., Ramasamy and K., Kadirgama and M. M., Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mahgoub, B. K. M. and Sulaiman, S. A. and Karim, Z. A. A. and Hagos, F. Y. (2015) Experimental Study on the Effect of Varying Syngas Composition on the Emissions of Dual Fuel CI Engine Operating at Various Engine Speeds. IOP Conference Series: Materials Science and Engineering, 100 (012006). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mahmood, Anwar and S., Izman and Mohammed Rafiq, Abdul Kadir and E. M., Nazim and Aini, Abdul Kadir and M., Konneh and Mas Ayu, Hassan (2016) Elemental Diffusion Behaviour of Biomedical Grade Titanium Alloy through Thermal Oxidation. Applied Mechanics and Materials, 819. pp. 591-595. ISSN 1662-7482. (Published)

Mahmood, M. H. and Maleque, M. A. and Rahman, Md Mustafizur (2022) Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5). 6013 -6023. ISSN 2193-567X (Print); 2191-4281 (Online). (Published)

Mahmood, R. A. and Ali, O. M. and Al-Janabi, A. and Al-Doori, G. and M. M., Noor (2021) Review of mechanical vapour compression refrigeration system part 2: performance challenge. International Journal of Applied Mechanics and Engineering, 26 (3). pp. 119-130. ISSN 1734-4492. (Published)

Mahmoodian, Reza and Hamdi, M. and Hassan, M. A. and Akbari, Abolghasem (2015) Mechanical and Chemical Characterization of a TiC/C System Synthesized Using a Focus Plasma Arc. PLoS ONE, 10 (6). pp. 1-10. ISSN 1932-6203. (Published)

Mahmud Jamil, Muhammad and Isa Adamu, Muhammad and Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Muhammad Yazid and R., Mamat and G., Najafi (2016) The Use of Nanofluids for Enhancing the Thermal Performance of Stationary Solar Collectors: A Review. Renewable and Sustainable Energy Reviews, 63. pp. 226-236. ISSN 1364-0321. (Published)

Mahmudul, H. M. and Hagos, F. Y. and R., Mamat and M. M., Noor and I. M., Yusri (2017) Effect of Oxygenate Additive on Diesel Engine Fuel Consumption and Emissions Operating with Biodiesel-Diesel Blend at Idling Conditions. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012084). ISSN 1757-899X

Maisara Mohyeldin, Gasim Mohamed (2012) Six Stroke Engine Arrangement. In: 15th International Conference on Applied Mechanics and Mechanical Engineering , 29-31 May 2012 , Cairo Egypt. .

Maisara Mohyeldin, Gasim Mohamed and Amirruddin, Abdul Kadir (2011) A Computational Comparison between Revetec Engine and Conventional Internal Combustion Engines on the Indicated Torque. World Academy of Science, Engineering and Technology, 5 (4). pp. 348-350. ISSN 2010-3778. (Published)

Maisara Mohyeldin, Gasim Mohamed and Amirruddin, Abdul Kadir (2010) Effect of Cam Profile On Cylinder Pressure In Revetec Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Maisara Mohyeldin, Gasim Mohamed and Lee, Giok Chui and Khirul Azhar, Anwar (2012) Experimental study on revetec engine cam performance. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-5., 36 (012014). ISSN 1757-899X

Maity, Rittick and Sudhakar, K. and Amir, Abdul Razak and Karthick, A. and Barbulescu, Dan (2023) Agrivoltaic: A strategic assessment using SWOT and TOWS matrix. Energies, 16 (8). pp. 1-18. ISSN 1996-1073. (Published)

Maizatul Asnida, Hassan (2013) Optimization of the electrical discharge machining performance on titanium alloy by using statistical method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Maizatul Asnida, Hassan (2018) Tribological behaviour of copper (II) oxide nanoparticles based lubricant to improve durability of contact surface. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Maizatul Mastura, Muhammad Nazri (2008) Design and fabricate of a motorized cutter for mechanical part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Makeen, Mohd Amin (2009) Design automatic baby swing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Makeen, Mohd Amin and Abdul, Hadi and M. F., Ghazali (2013) Leakage Detection in Pipeline Using Synchrosqueeze Wavelet Transform. Applied Mechanics and Materials, 465-466. pp. 467-471. ISSN 1662-7482. (Published)

Makeen, Mohd Amin and M. F., Ghazali (2014) Leakage Detection in Galvanized Iron (GI) Pipelines Using Ensemble Empirical Mode Decomposition Analysis (EEMD). In: International Conference on Mathemathics, Engineering & Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Pulau Pinang. pp. 1-5.. (Unpublished)

Makeen, Mohd Amin and M. F., Ghazali (2015) Leakage Detection in Galvanized Iron Pipelines using Ensemble Empirical Mode Decomposition Analysis. In: AIP Conference Proceedings: International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Penang, Malaysia. pp. 1-5., 1660 (070003). ISBN 978-0-7354-1304-7

Makeen, Mohd Amin and M. F., Ghazali and N. F., Adnan (2015) Leak Detection in Medium Density Polyethylene (MDPE) Pipe Using Pressure Transient Method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-6., 100 (012007). ISSN 1757-899X

Makeen, Mohd Amin and Mohd Fairusham, Ghazali and Abdul, malik and Nurul Fatiehah, Adnan (2014) Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 352-355. ISSN 1991-8178(print); 2309-8414(online). (Published)

Maliessa Nabilah, Mazelan (2023) The effect of different Sn-Ag-Cu (SAC) solder form on solder/Cu joint performance through microwave hybrid heating. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Rabiatull Aisha, Idris).

Manam, N.S. and W. S., Wan Harun and Awang Shri, Dayangku Noorfazidah and Saiful Anwar, Che Ghani and Kurniawan, Tedi and M. H., Ismail and M. H. I., Ibrahim (2017) Study of Corrosion in Biocompatible Metals for Implants: A RevieW. Journal of Alloys and Compounds, 701. pp. 698-715. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Manda, M. S. and M. R. M., Rejab and A.H, Shukur and S.S, Amirnuddin and M.K, Kasmar (2022) Analytical Model Evaluation on Tin Slag Polymer Concrete Behavior under Compression. In: Proceedings of the International Conference on Aerospace & Mechanical Engineering (ICAME 21). International Conference on Aerospace & Mechanical Engineering (ICAME 21) , 16-18 December 2021 , India. .

Manda, M. S. and M. R. M., Rejab and S., Abu Hassan (2023) Evaluation of tin slag polymer concrete column compressive behavior using finite element analysis. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 289-301.. ISSN 2195-4356 ISBN 978-981191456-0

Manda, M. S. and M. R. M., Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) Review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure. Materials and Applications, 1 . Springer Link, Singapore, pp. 43-58. ISBN 978-981-16-6382-6 (Printed); 978-981-16-6383-3 (Online)

Manoj Kumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano (2019) Performance comparison of BAPV and BIPV systems with c-Si, CIS and CdTe photovoltaic technologies under tropical weather conditions. Case Studies in Thermal Engineering, 13. pp. 1-10. ISSN 2214-157X. (Published)

ManojKumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano and Jayaseelan, V. (2018) On the technologies empowering drones for intelligent monitoring of solar photovoltaic power plants. Procedia Computer Science, 133. pp. 585-593. ISSN 1877-0509. (Published)

Maoqi, Li and Ishak, M. I. and Peeie, M. H. (2022) A numerical simulation of vehicle dynamics behavior for a four-wheel steering vehicle with the passive control system. Journal of Mechanical Engineering and Sciences (JMES), 16 (2). 8953 -8964. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2021) Investigation on linear and nonlinear dynamic equation for vehicle model in numerical simulation. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012010). ISSN 1757-899X

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2019) The effect of parallel steering of a four-wheel drive and fourwheel steer electric vehicle during spinning condition: a numerical simulation. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012084). ISSN 1757-8981 (Print); 1757-899X (Online)

Marina, Mohamad and Jeefferie, Abd Razak and Noraiham, Mohamad and Sahrim, Haji Ahmad and Ramli, Junid and Puspitasari, Poppy (2020) A short review on polyurethane-based nanocomposites for various applications. In: IOP Conference Series: Materials Science and Engineering; 2020 International Conference on Sustainable Materials, ICoSM 2020 , 3 September 2020 , Pahang, Virtual. pp. 1-8., 957 (012029). ISSN 1757-8981

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Investigation of wear performance of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1740-1744. ISSN 2214-7853. (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Morphological study of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1745-1748. ISSN 2214-7853. (Published)

Mas Ayu, Hassan (2008) Surface Integrity Study In WEDM Of Tungsten Carbide. Solid State Science and Technology, 16 (1). pp. 1-11. ISSN 0128-7389. (Published)

Mas Ayu, Hassan (2008) Wire Electrical Discharge Machining of Tungsten Carbide. In: Malaysian Science And Technology Congress 2008 (MSTC 2008) , 16 – 17 December 2008 , Kuala Lumpur Convention Centre. . (Unpublished)

Mas Ayu, Hassan and Rosdi, Daud (2008) Design and Analysis for the Improvement of Electric Kettle Performance. In: National Conference of Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Universiti Teknikal Malaysia Melaka. . (Unpublished)

Mas Ayu, Hassan and Rosdi, Daud and Siti Haryani, Tomadi (2008) Study Of The Surface Integrity Of The Machined Workpiece In The Wedm Of Tungsten Carbide. In: Malaysian Metallurgical Conference – MMC 2008 , 3-4 December 2008 , UKM, Bangi Selangor. . (Unpublished)

Mas Ayu, Hassan and Rosdi, Daud and Siti Haryani, Tomadi and Mohamed Reza Zalani, Mohamed Suffian (2009) Study of the Surface Integrity of AISI 4140 Steel in Wire Electrical Discharge Machining. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. .

Mas Ayu, H. (2020) Effect of biodegradable PLA on hydroxyapatite coating to improve adhesion properties on Cr-Co-Mo alloy. , [Research Report: Research Report] (Unpublished)

Mas Ayu, H. (2017) Hydroxyapatite coating with oxide interlayer on biomedical grade cobalt based alloy. , [Research Report: Research Report] (Unpublished)

Mas Ayu, Hassan (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mas Ayu, Hassan and Engku Mohammad, Nazim and Sudin, Izman and Ourdjini, Ali and Tuty, Abu Bakar (2014) Adhesion Strength of HFCVD Diamond Coating on WC Substrate Seeded with Diamond and Different Ratios of SiC Powders. Advanced Materials Research, 845. pp. 467-471. ISSN 1662-8985. (Published)

Mas Ayu, Hassan and Izman, Sudin and R., Daud and Krishnamurithy, G. and A., Shah and Siti Haryani, Tomadi and Salwani, Mohd Salleh (2017) Surface Modification on CoCrMo Alloy to Improve the Adhesion Strength of Hydroxyapatite Coating. Procedia Engineering, 184. pp. 399-408. ISSN 1877-7058. (Published)

Mas Ayu, Hassan and Mohd Faiz, Mohd Yusoff and Mohammed Rafiq, Abdul Kadir and Nida, Iqbal and Rafaqat, Hussain (2014) Dipcoating of Poly (E-caprolactone)/hydroxyapatite Composite Coating on Ti6Al4V for Enhanced Corrosion Protection. Surface and Coatings Technology, 245. pp. 102-107. ISSN 0257-8972. (Published)

Mas Ayu, Hassan and Mustaqieem, M. M. and A., Shah and Arafat, Andril and Dambatta, M. S. (2019) Effect PLA/HA coating on dental implant using finite element method. In: The 4th International Conference on Frontiers of Composite Materials , 13-16 November 2019 , The University of Queensland, Brisbane, Australia. pp. 1-9.. (Unpublished)

Mas Ayu, Hassan and N. S., Mehat and S., Sharif and Rosdi, Daud and Siti Haryani, Tomadi and Mohamed Reza Zalani, Mohamed Suffian (2009) Study Of The Surface Integrity Of AISI 4140 Steel In Wire Electrical Discharge Machining. In: Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS 2009) , 18-20 March 2009 , Hong Kong. pp. 1666-1671., II. ISBN 978-988-17012-7-5

Mas Ayu, Hassan and R., Daud and A., Shah and H. M., Hazwan and Siti Haryani, Tomadi and Salwani, Mohd Salleh (2018) Effect of Thermal Oxidation and Carbon Concentrations on Co-Cr-Mo Alloy in Enhanced Corrosion Protection. Materials Science Forum, 916. pp. 170-176. ISSN 0255-5476. (Published)

Mas Ayu, Hassan and R., Daud and Sudin, Izman and Arman Shah, Abdullah and Mahmood, Anwar and Krishnamurithy, G. and Tunku, Kamarul (2018) In-vitro biocompatibility study of hydroxyapatite coated on Co-Cr-Mo with oxide interlayer. Jurnal Teknologi (Sciences and Engineering), 80 (1). pp. 35-42. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mas Ayu, Hassan and Rosdi, Daud and A., Shah and M. H. M., Hazwan and Siti Haryani, Tomadi and Salwani, Mohd Salleh (2018) Effect of thermal oxidation and carbon concentration on Co-Cr-Mo alloy in enhanced corrosion protection. In: Materials Science Forum, 6th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2017 and 2nd International Conference on Materials Technology and Applications, ICMTA 2017 , 26-29 Oktober 2017 , Tokyo, Japan. pp. 1-7.. ISSN 02555476 ISBN 978-303571201-8

Mas Ayu, Hassan and Rosdi, Daud and A., Shah and Mohd Faiz, M. Y. and Hazwan, H. M. and Salwani, Mohd Salleh and Siti Haryani, Tomadi and Reza, M. S. (2017) Thermal Oxidation Process Improved Corrosion in Cobalt Chromium Molybdenum Alloys. International Journal of Advanced and Applied Sciences, 9 (4). pp. 144-149. ISSN 2313-626X. (Published)

Mas Ayu, Hassan and Rosdi, Daud and Sudin, Izman and A., Shah and Mahmood, Anwar and Kurniawan, Tedi and Juliawati, Alias (2018) Improving biocompatibility of cobalt based alloy using chemical etching and mechanical treatment. In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering , 14 - 15 November 2018 , Melaka, Malaysia. pp. 1-6.. (Unpublished)

Mas Ayu, Hassan and S., Izman and Mohammed Rafiq, Abdul Kadir and R., Daud and Salwani, Mohd Salleh and Mohd Faiz, Mohd Yusoff and Mahmood, Anwar and G., Krishnamurithy and T., Tamarul (2015) The Effects of Oxide Layer on Co-Cr-Mo: Preliminary Study In-vitro. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 19-22 Sept 2015 , Johor Bahru. . (Unpublished)

Mas Ayu, Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2018) Optimization on wear performance of anti wear additive added biolubricant. In: Improved performance of materials: design and experimental approaches. Springer, Switzerland, pp. 1-10. ISBN 9783319595900 (online); 9783319595894 (print)

Mas Ayu, Hassan and Sudin, Izman and Mohammed Rafiq, Abdul Kadir and R., Daud and Mohd Faiz, Mohd Yusoff and Mahmood, Anwar and A., Shah (2015) Creating Oxide Interlayer Through Thermal Oxidation Improves Adhesion Strength Of Hydroxyapatite Coating on Co-Cr-Mo Substrates. In: 1st International Conference on Materials and Manufacturing Engineering and Technology , 28-31 July 2015 , Seoul, Korea. . (Unpublished)

Mas Ayu, Hassan and Sudin, Izman and Rosdi, Daud and A., Shah and Siti Haryani, Tomadi and M. S., Dambatta (2019) Thermal oxidation promotes growth of nanocrystalline diamond on biomedical grade Co Cr mo alloy. In: 4th International Conference on Advances in Manufacturing and Materials Engineering 2019 , 29 Oct-1 Nov. 2019 , Putrajaya, Malaysia. pp. 1-3.. (Unpublished)

Mas Ayu, Hassan and Zubaidah, Zamri and Rosdi, Daud and Norizah, Redzuan and Izman, Sudin (2022) The Effect of PLA/HA Coating Thickness on Crack Formation and Corrosion Performance. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer, Cham, Cham, pp. 47-53. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)

Mas Ira Syafila, Mohd Hilmi Tan and Ahmad Fairuz, Omar and Marzaini, Rashid and Uda, Hashim (2019) VIS-NIR spectral and particles distribution of Au, Ag, Cu, Al and Ni nanoparticles synthesized in distilled water using laser ablation. Results in Physics, 14. pp. 1-12. ISSN 2211-3797. (Published)

Mas Ira Syafila, Mohd Hilmi Tan and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Fatimah, Dzaharudin and Mohd Azraie, Mohd Azmi and Mohd Noor, Ahmad and Nur Akmal, Abd. Rahman and Khairil Anuar, Khairi (2021) Near-infrared spectroscopy for ganoderma boninense detection in oil palm: An outlook. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 117-126. ISBN 978-981-33-4597-3

Mashoedah, . and Rochayati, U. and Hidayatulloh, Indra and Sony, A. and Ernawan, Ferda and Fardiansyah, . and Nuryanto, Apri IoT enabled ventilator monitoring system for covid-19 patients. Journal of Physics: Conference series, 2111 (1). pp. 1-8. ISSN 1742-6588 (print); 1742-6596 (online). (Published)

Masitah, Jusop (2016) Multi-objective optimisation of assembly line balancing type-e problem with resource constraints. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Masitah, Jusop and M. F. F., Ab Rashid (2016) Optimization of Assembly Line Balancing with Resource Constraint using NSGA-II: A Case Study. International Journal of Applied Engineering Research (IJAER), 12 (7). pp. 1421-1426. ISSN 0973-4562 (print); 1087-1090 (online). (Unpublished) (Unpublished)

Masood, Kamal (2015) A new hybrid multiaxial fatigue life model based on critical plane continuum damage mechanics and genetic algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Masriah, Mansur and Ahmad Afif, Ahmarofi (2020) Designing the re-layout of the production floor using integrated systematic layout planning (SLP) and simulation methods. International Journal of Industrial Management (IJIM), 6 (1). pp. 50-57. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Mathivanan, D. B. and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Tezara, C. (2015) Effect of Fibre Loading on the Flexural Properties of Natural Fibre Reinforced Polymer Composites. Applied Mechanics and Materials, 695. pp. 1-4. ISSN 1662-7482. (Published)

Mathivanan, D. B. and Siregar, J. P. and M. R. M., Rejab and Bachtiar, Dandi and Cionita, Tezara (2017) The Mechanical Properties of Alkaline Treated Pineapple Leaf Fibre to Reinforce Tapioca based Bioplastic Resin Composite. In: Manufacturing Sciences and Technologies VII. Trans Tech Publications Ltd, pp. 66-70. ISBN 9783038357322

Mathivanan, D. B. and Siregar, J. P. and M. R. M., Rejab and Bachtiar, Dandi and Tezara, C. (2016) Modification of Pineapple Leaf Fibre to Reinforce Polylactic Acid Composite with Improved Mechanical Properties. In: International Symposium on Advanced Polymeric Materials (ISAPM 2016) , 16-19 May 2016 , Putra World Trade Centre (PWTC), Kuala Lumpur. .

Mattei, G. and Aqida, S.N. (2024) Optical properties of surface enhanced Raman scattering. In: Encyclopedia of Condensed Matter Physics (Second Edition). Elsevier, pp. 728-738. ISBN 978-0-323-91408-6

Mawarnie, Ismail (2021) Mechanical properties and fracture behavior of natural fiber-glass fiber reinforced epoxy matrix hybrid composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Mawarnie, Ismail and Mohd Ruzaimi, Mat Rejab and Siregar, J. P. and Zalinawati, Muhamad and Quanjin, Ma (2020) Tensile properties of hybrid woven glass fibre/PALF reinforced polymer composite. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 448 -454.. ISSN 2195-4356 ISBN 978-981-15-0949-0

Mawarnie, Ismail and Mohd Ruzaimi, Mat Rejab and Siregar, Januar Parlaungan and Zalinawati, Mohamad and Quanjin, Ma and Mohammed, A. A. (2020) Mechanical properties of hybrid glass fiber/rice husk reinforced polymer composite. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020 , 6 - 7 March 2020 , Hyderabad, India. pp. 1749-1755., 27 (161490). ISSN 2214-7853

Maziyana, Marzuki and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff (2021) Preparation and microstructural characterization of five-layered aluminium-aluminium oxide functionally graded material. In: IOP Conference Series: Materials Science and Engineering; The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 - 23 December 2020 , Pekan, Pahang. pp. 1-9., 1092 (012031). ISSN 1757-899X

Md Munirul, Hasan and Rahman, Md Mustafizur and Suraya, Abu Bakar and Islam, Mir Sujaul and Kabir, Muhammad Nomani (2022) An overview of effect of activation functions on training and performance of artificial neural network modelling. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 115..

Md. Ashikur, Rahman Khan and M. M., Rahman (2014) Surface Study in a Non-conventional (Electrical Discharge Machining) Process for Grade 6 Titanium Material. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 89-93. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Md. Ashikur, Rahman Khan and M. M., Rahman (2017) Surface finish characteristics of titanium alloy in a non conventional technique. In: International Conference on Recent Trends in Engineering and Material Sciences (ICEMS-2016) , 17-19 March 2016 , Jaipur, India. pp. 9352-9355., 4 (9). ISSN 2214-7853

Md. Ashikur, Rahman Khan and M. M., Rahman and K., Kadirgama and A. R., Ismail (2012) RSM model to evaluate material removal rate in EDM of Ti-5Al-2.5Sn using graphite electrode. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012016). ISSN 1757-899X

Md. Nazmus, Sakib (2022) Study on the fabrication and mechanical characterization of graphene-epoxy nanocomposite material. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nafrizuan, Mat Yahya).

Mebrahitom, A. and Azmir, Azhari (2014) Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM. Advanced Materials Research, 1133. pp. 339-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Megalingam, A and Asnul Hadi, Ahmad and Nasrul Azuan, Alang and Juliawati, Alias and Nur Azhani, Abd Razak (2023) Application of response surface methodology for parameter optimization of aluminum 7075 thixoforming feedstock billet production. Journal of Materials Engineering and Performance, 32 (13). pp. 5919-5931. ISSN 1059-9495. (Published)

Megalingam, Arumugampillai and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof and Sudhakar, Kumarasamy (2022) Viscosity measurements in semi-solid metal processing: Current status and recent developments. The International Journal of Advanced Manufacturing Technology, 119 (3-4). pp. 1435-1459. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mehek, Rimsha and Iqbal, Naseem and Javed, Omama and Noor, Tayyaba and Liu, Wei (2024) Improved rate capability and long cycle life of metal-organic framework derived TiO2 @V2O5 composite as an efficient cathode for sodium-ion batteries. Journal of Energy Storage, 78 (109921). pp. 1-15. ISSN 2352-152X. (Published)

Melcot, Jinikol (2009) Punching tool wear modeling using finite element method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mia, Md. Shahin and Chowdhury, Mohammad Asaduzzaman and Rahaman, Mohammad Lutfar and Nuruzzaman, D. M. and Das, Suman and Debnath, Uttam Kumar (2017) Friction and Wear of Non-Ferrous Materials Under Artificially Created Vibration for Machine Design. International Journal of Materials Engineering Innovation, 8 (2). pp. 96-121. ISSN 1757-2754. (Published)

Mimi Ilani, Mispun (2012) KK3 students mailing system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mimi Muzlina, Mukri and Nor Atiqah, Zolpakar (2023) Optimization of Temperature Rise in Turning Using Single Objective Genetic Algorithm. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual Online. pp. 527-540., 882. ISSN 1876-1100

Mimi Muzlina, Mukri and Nor Atiqah, Zolpakar and Pathak, Sunil (2023) Optimization of Machining Parameters in Turning for Different Hardness using Multi-Objective Genetic Algorithm. Journal of Mechanical Engineering, 20 (3). pp. 25-48. ISSN 1823-5514. (Published)

Miminorazeansuhaila, Loman and Che Ku Eddy Nizwan, Che Ku Husin and Norshalawati, Mat Yusof (2013) Defect Detection on Welding Joint using Acoustic Emission Technology. In: International Conference on Innovations in Engineering and Technology (ICIET'2013) , 25-26 December 2013 , Bangkok, Thailand. pp. 154-157..

Miminorazeansuhaila, Loman and Che Ku Eddy Nizwan, Che Ku Husin and Mohd Imran, Yusof and Mohd Fadhlan, Yusof (2014) Utilization of the Acoustic Emission Technology in Bone Tissues. Applied Mechanics and Materials, 471. pp. 218-222. ISSN 1662-7482. (Published)

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari (2022) Fatigue Detection on glass fibre reinforced polymer material using Fiber Bragg Grating sensor. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (23). Springer, Cham, Springer. Cham, pp. 115-125. ISBN 978-3-030-85645-8 (Printed); 978-3-030-85646-5(Online)

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari and F., Lamin (2023) High-cycle fatigue life behaviour of fabricated glass fibre-reinforced polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). 10711 -10719. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Miminorazeansuhaila, Loman and Z. M., Hafizi (2019) Leak detection in a pipe using fibre bragg grating sensor. In: International Postgraduate Conference On Mechanical Engineering (IPCME) , 31 Oktober 2018 , Universiti Malaysia Pahang (UMP) Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Minhalina, Ahmad Buhairi and Farhana, Mohd Foudzi and Fathin Iliana, Jamhari and Abu Bakar, Sulong and Nabilah Afiqah, Mohd Radzuan and Norhamidi A., Muhamad and Intan Fadhlina, Mohamed and Abdul Hadi, Azman and Wan Sharuzi, Wan Harun and Al-Furjan, M. S.H. (2023) Review on volumetric energy density: Influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 2363-9512. (Published)

Mirza, H. and Hossain, T. M. and Soh, Ping Jack and Jamlos, M. F. and Ramli, M. N. and Al-Hadi, A. A. and Hassan, E. S. and Yang, S. (2019) Deployable linear-to-circular polarizer using PDMS based on unloaded and loaded circular FSS arrays for pico-satellites. IEEE Access, 7. pp. 2034-2041. ISSN 2169-3536. (Published)

Miss Hasimawaty, Mat Kiah (2013) Premixed flame acceleration in straight and bend close pipe. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Moey, L. K. and Tok, R. J. and Tai, V. C. and Mathew, P. Reuben and Wu, J. Kai-Seu and Oumer, A. N. (2023) Investigation of opening position on natural cross ventilation for an isolated building. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 825 -838.. ISSN 2195-4356 ISBN 978-981191456-0

Moey, L.K. and Alyazidi, S. M. S. and Tai, V. C. and Kai-Seun, J. W. and Mathew, P. R. and Oumer, A. N. (2023) Effect of opening ratios with and without louvers in cross ventilation using CFD. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 579 -594.. ISSN 2195-4356 ISBN 978-981191456-0

Mofijur, M. and Masjuki, H. H. and Kalam, Md. Abul and Rahman, S. M. Ashrafur and Mahmudul, H. M. (2015) Energy Scenario and Biofuel Policies and Targets in ASEAN Countries. Renewable and Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321. (Published)

Mofijur, M. and Rasul, Md Golam and Hyde, J. and Azad, A. K. and R., Mamat and Bhuiya, M. M. K. (2016) Role of Biofuel and Their Binary (Diesel–Biodiesel) and Ternary (Ethanol–Biodiesel–Diesel) Blends on Internal Combustion Engines Emission Reduction. Renewable and Sustainable Energy Reviews, 53. pp. 265-278. ISSN 1364-0321. (Published)

Mogan, Arasappan (2009) Development of controller software system for CAM manufacturing machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad, M. H. and M. Nafis, O. Z. (2019) Simulation program for 4th axis CNC machining in NX CAM system. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6971-6986. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohamad Alif, Mohd Nasir (2012) Development of flexural structure for chatter machining testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Amirul Aliff, Yahya (2016) Effect of reinforcement volume fraction on the mechanical properties of the al-sic composite. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Arif, Roslan (2013) Evaluation on the performances of a micro gas turbine, gas engine-cogeneration system in sewage treatment plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Faizal, Ridzwan and Saiful Anwar, Che Ghani and Goyal, A. (2022) Numerical analysis of internal flow in internally cooled cutting tool. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 116..

Mohamad Faza Firdaus, Mohd Rashid (2012) Design and fabrication of display unit for exploded components of single cylinder 4 stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Firdaus, Basrawi (2012) Performance analysis and optimization biogas-fuelled cogeneration systems in sewage treatment plants. PhD thesis, Kitami Institute of Technology, Hokkaido, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Firdaus, Basrawi and Anuar, M. N. A. F. and Ibrahim, T. K. and A. A., Razak (2020) Experimental analysis on the effect of cooling surface area and flow rate for water cooled photovoltaic module. In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-9., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohamad Hafidzul Rahman, Alias (2022) Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil, Abdul Rahim).

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and R. A., Bakar (2019) Single Hole Direct Injector Simulation Validation and Parametric Sensitivity Study. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7..

Mohamad Hafiz, Mohd Fauzi and Ismail, Mohd Khairuddin and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Wan Hasbullah, Mohd Isa (2021) Articulated robot arm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 57-64. ISSN 2637-0883. (Published)

Mohamad Hafizi, Baharom (2014) Vulnerability assessment due to wind storm impact. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Hafizul Rahman, Alias and Mohd Fadzil, Abdul Rahim and Muhamad Haziq, Mohd Ismail Rodzi and Rosli, Abu Bakar (2018) Effect of Injection Pressure, Injection Duration, and Injection Frequency on Direct Injector’s Mass Flow Rate for Compressed Natural Gas Fuel. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (02008). ISSN 2261-236X

Mohamad Harith Hilmi, Fajaffri and Nafrizuan, Mat Yahya (2023) Comparison performances between MABSA-PI controller and MABSA-PD controller for DC motor position system. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 72-78. ISSN 2637-0883. (Published)

Mohamad Heerwan, Peeie and Abdul Nasir, Abd Ghafar and Syafiq Fauzi, Kamarulzaman and Muhammad lzhar, Ishak and Nurul Nadia, Nor Hamran and Wan Hassan, Wan Hamat (2018) Add-on-e-wheelchair conversion kit with lOT patient monitoring system. , [Research Book Profile: Research Report] (Unpublished)

Mohamad Heerwan, Peeie and Mod Razali, Hanipah and Ahmad Fitri, Yusop and Saiful Anwar, Che Ghani and Priyandoko, Gigih and Mustafizurahman, Md and Rizalman, Mamat and Syafiq Fauzi, Kamarulzaman (2018) Investigation on electric motor as an actuator of anti skid control system to improve the safety of small electric vehicle. , [Research Book Profile: Research Report] (Unpublished)

Mohamad Heerwan, Peeie and N. M., Ali and Ogino, H. (2017) Study on Differential Regenerative Braking Torque Control to Increase the Stability of the Small Electric Vehicle With Four In-Wheel Motors. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01042). ISSN 2261-236X

Mohamad Heerwan, Peeie and Ogino, Hirohiko and Oshinoya, Yasuo (2016) Skid Control of a Small Electric Vehicle with Two In-Wheel Motors: Simulation Model of ABS and Regenerative Brake Control. International Journal of Crashworthiness, 21 (5). pp. 396-406. ISSN 1358-8265. (Published)

Mohamad Heerwan, Peeie and S. M., Ashraf and M., Ishak (2017) Combination of Skid Control and Direct Yaw Moment Control to Improve The Safety And Stability of The Small Electric Vehicle With Two In-Wheel Motors. In: 8th International Conference In Mechanical And Manufacturing Engineering (ICME2017) , 22-23 July 2017 , Bella Vista Waterfront, Langkawi, Kedah, Malaysia. pp. 1-12., 135. ISSN 2261236X

Mohamad Heerwan, Peeie and S. M., Asyraf and A. N., Efistein and C. H., Seah and J. M., Zikri and Syawahieda, J. N. (2017) Experimental Study of the Vehicle Dynamics Behavior during Lane Changing in Different Speeds. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012078). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohamad Heerwan, Peeie and S. M., Asyraf and Muhammad Izhar, Ishak (2018) The comparison respond of braking torque control between PID and SMC controller for electric powered wheelchair descending on slope condition. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-9., 342 (1). ISSN 17578981

Mohamad Ilzam, .Jamat (2011) 3 projek penyelidikan cemerlang di Archimedes 2011. CREATE (21). ISSN 1823-7487

Mohamad Izuan, Izzudin (2022) Investigation on performance, combustion and emission characteristics using biodiesel-butanol-water blends in diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

Mohamad Jazmir Hassan, Mohamed (2012) Experimental and finite element evaluation of bending for stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Nafis, Jamaluddin (2013) Improvement of boiling process in fish cracker production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Nazirul Mubin, Merzuki (2020) Investigation on mechanical and modal properties of aluminium based fibre metal laminates. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Mohamad Nazirul Mubin, Merzuki and Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Zhang, Bo (2021) Experimental and numerical investigation of fibre-metal-laminates (FMLs) under free vibration analysis. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 854-860., 48 (4). ISSN 2214-7853

Mohamad Nazmi, Zaidi Moni and F., Basrawi and Shaharin Anwar, Sulaiman and Ahmad Faridzuan, Zakeria and Muhammad Fahmi, Ramely (2017) Effect of ventilation on thermal comfort in campus hostel bedrooms after sunset. In: UTP-UMP Symposium on Energy Systems (SES 2017) , 26-27 September 2017 , Perak, Malaysia. pp. 1-7., 131 (03005). ISSN 2261-236X

Mohamad Nazrin Kooy, Mohd Daniel Kooy (2010) Experimental and numerical analysis of deep drawing process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Normazuan, Mustafa (2012) Design, analysis and fabricate small cross flow turbine for Sungai Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Norzuhri, Basirun (2013) A study on Pipeline Inspection Gauge (PIG) Flow Parameters in Small Size Pipe. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Rais, Ramli (2009) Investigation on surface roughness of mild steel using coated carbide cutting tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Redhwan, Abd Aziz (2018) Performance analysis of aluminimum oxide/polyalkylene glycol nanolubricant in automotive air conditioning system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Ridhwan, Ruslan (2008) Failure analysis of input shaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Ridhwan, Ruslan (2008) Failure analysis of input shaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Rizdwan, Rashid Chand (2020) Performance of micro gas turbine trigeneration system and photovoltaic hybrid based system in remote area applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Rusdi, Abdul Rahman and L. H., Shah and M., Ishak (2015) Parameter Optimization of Preheating Method on Aluminium Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding. Applied Mechanics and Materials, 773-74. pp. 253-256. ISSN 1662-7482. (Published)

Mohamad Rusydi, Mohamad Yasin and S. N. A., Abdul Razak (2021) Effect of high temperature solution heat treatment time on quality index and morphology of A356 DC alloy. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1924-1928., 48. ISSN 2214-7853

Mohamad Ruzaini, Mohamed Ibrahim (2013) Design and fabrication of motorized cutter prototype. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saiful, Izwan Busu (2010) Wear of coated carbide insert in machining of mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saufi, Ayob (2010) Design of automatic control system to control the flow of biogas fuel into internal combustion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saufi, Mohamad Zainury (2008) Modal analysis for engine crankshaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sazman, Sazali (2010) Fuel-saving plate-electrode base device on gasoline fuel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shafiq, Alias (2010) Design of small heat exchanger (double pipe type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shafis, Ahmad Ramli (2013) Design and fabrication of lead detection test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shaiful, Abdul Karim and Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Nurhafizah, Abu Talip Yusof and Nor Hazwani, Aziz (2022) Effect of processing parameters on cellulose content extracted from pineapple leaf. Biocatalysis and Agricultural Biotechnology, 42 (102339). pp. 1-12. ISSN 1878-8181. (Published)

Mohamad Suffi, Kamari (2010) Surface integrity of mild steel in wire electrical discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sufian, Khalid (2010) Study of high speed gas turbine in industry by fuel ratio and turbine speed. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Syafiq, Mohd Nazaruddin (2008) Development and prototyping of a takraw ball feeder for accuracy training based system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Syahmi, Shahrom and A. R., Yusoff (2013) Experimental Cold Compression of Aluminum 6061 Chips from Different Lubricant Condition. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. p. 1..

Mohamad Syahmi, Shahrom and A. R., Yusoff and Mohd Amri, Lajis (2013) Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process. Advanced Materials Research, 845. pp. 637-641. ISSN 1022-6680, ESSN: 1662-8985. (Published)

Mohamad Syaiful Izwan, Alies and Nur Zalikha, Khalil (2021) Effect of alumina/graphene hybrid nano reinforcement to the adhesion and mechanical properties of adhesively bonded aluminum alloy with epoxy. Materials Today: Proceedings, 51 (2). pp. 1437-1443. ISSN 2214-7853. (Published)

Mohamad Syazwan, Mohd Zin and M. N., Abdul Rani and M. A., Yunus and W. I. I., Wan Iskandar Mirza and M. S. M., Sani (2019) Experimental modal analysis procedure for a laser spot welded hat-plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfor , 7 March 2019 , Selangor, Malaysia. pp. 1-9., 1262 (012015). ISSN 1742-6588 (print); 1742-6596 (online)

Mohamad Waspi, Kassim Krismaran (2009) Influence of ethanol in spark ignition engine fuel consumption. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Yazid, Idris (2009) Experimental study of kerf width and taper on laser beam cutting acrylic sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Yazid, Mohamad Yassin (2010) Designing and manufacture solar turbines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Yusri, Mohamad Zin (2013) Experimental analysis of drowsiness detection system based on grasping steering bahavior. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Zahari, Hamdan (2010) Performance investigation of a small four stroke carburatted SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zairi, Baharom and Wan Nazdah, Wan Hussin (2014) Scheduling Analysis for Job Sequencing in Veneer Lamination Line. In: International Conference on Information Management and Industrial Engineering (ICII 2014) , 22-23 August 2014 , Dubai. . (Unpublished)

Mohamad Zairi, Baharom and Delbressine, Frank and Toeters, Marina and Feijs, Loe (2018) The development and the wearability assessment of cliff: an automatized zipper. International Journal of Mechanical Engineering and Robotics Research, 7 (5). pp. 448-457. ISSN 2278-0149. (Published)

Mohamad Zairi, Baharom and M. Z., Nuawi and Priyandoko, Gigih and S. M., Harris (2012) Eddy Current Braking Experiment using Brake Disc from Aluminium Series of A16061 and A17075. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohamad Zairi, Baharom and Priyandoko, Gigih and F. R. M., Romlay and M. S. M., Sani and M. S., Salleh and M. H. M., Yusof (2015) Voltage Induced Effect for Vibration Suppression Using Eddy Current on Power Steering System. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7482-7487. ISSN 1819-6608. (Published)

Mohamad Zairi, Baharom and Priyandoko, Gigih and M.Z., Nuawi and S.M, Harris and L.M, Siow (2011) Eddy Current Braking Study for Brake Disc of Aluminium, Copper and Zink. In: Regional Engineering Postgraduate Conference (EPC) 2011 , 4-5 October 2011 , Puri Pujangga, UKM. .

Mohamad Zairi, Baharom and Zulkifli, Ahmad@Manap and Nursya Mimie Ayuny, Ismail and Mohd Hasnun Ariff, Hassan and Karjanto, Juffrizal and Khairil Anwar, Abu Kassim (2023) Pedal Error Naturalistic Driving Study Among Malaysian Drivers. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 61-75.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Mohamad Zikri Amin, Awang and Mohd Azrul Hisham, Mohd Adib (2021) ReVwalk gamification for cerebral palsy kids. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohamed Faizan, Basheer Ahmad (2008) Obstacle avoidance legged robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamed Farid, Mohamed Faruq (2008) PID controller design for DC motor using matlab application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamed Mokhtarudin, Mohd Jamil and Oumer, Ahmed Nurye and Adib, M. A.H.M. and Jalıl, Muhammad Hilmi and Einly, Lim and Ahmad Hafiz, Zulkifly (2019) Development of brain tissue swelling predictive tools for ischaemic stroke patient post-treatment. , [Research Report: Research Report] (Unpublished)

Mohamed Reza Zalani, Mohamed Suffian and Mas Ayu, Hassan and Siti Haryani, Tomadi and Rosdi, Daud (2010) Effects Of Polarity Parameter On Machining Of Tool Steel Workpiece Using Electrical Discharge Machining. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Muhammad Adib, Shaharun (2012) Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012044). ISSN 1757-899X

Mohamed Reza Zalani, Mohamed Suffian and M. A., Hamdi and Azmir, Azhari (2010) Optimization of EDM Injection Flushing Type Control Parameters Using Grey Relational Analysis on AISI 304 Stainless Steel Workpiece. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . ISBN 978-967-5080-9501

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Izwan, Ismail (2016) Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface. Applied Physics A: Materials Science and Processing, 122 (611). pp. 122-611. ISSN 09478396. (Published)

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Mohd Toff, Mohd Radzi (2014) An Investigation of Phase Crystallinity in Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating. Key Engineering Materials, 611 (612). pp. 1601-1607. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Mohamed Saiful, Firdaus Hussin and Halyani, Mohd. Yassim and Nursabillilah, Mohd. Ali and Muhammad Ashraf, Fauzi and Zulkefli, Ismail and Fatin Farhana, Rosli (2019) Conceptual design approach and ergonomics analysis of fire resistant purpose shield. ARPN Journal of Engineering and Applied Sciences, 14 (6). pp. 1264-1268. ISSN 1819-6608. (Published)

Mohammad, Abdul Jalil and Moniruzzaman, Md. and Parvez, Md. Shohan and Siddika, Ayesha and Abdul Gafur, Md. and Repon, Md. Reazuddin and Hossain, Md. Tanjim (2021) A novel approach for pineapple leaf fiber processing as an ultimate fiber using existing machines. Heliyon, 7 (8). pp. 1-9. ISSN 2405-8440. (Published)

Mohammad, Azeem and Hamdan, Haji Ya and Kumar, Mukesh and Stabla, Paweł and Smolnicki, Michal Jan and Gemi, Lokman and Khan, Rehan and Ahmed, Tauseef and Quanjin, Ma and Sadique, Rehan Rehan and Ainul Akmar, Mokhtar and Mazli, Mustapha (2022) Application of filament winding technology in composite pressure vessels and challenges : A review. Journal of Energy Storage, 49 (103468). ISSN 2352-152X. (Published)

Mohammad, Ismail (2013) The study of spray characteristics by using video image processing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Akmal, Akashah and R., Mamat and Abdul Adam, Abdullah and A., Aziz and H. M., Yassin (2015) Effect Of Ambient Temperature On Diesel-Engine Combustion Characteristics Operating With Alcohol Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2373-2382. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammad Ali, Asaad and Mohammad, Ismail and Mahmood, Md. Tahir and Huseien, Ghasan Fahim and Raja, Pandian Bothi and Asmara, Y. P. (2018) Enhanced corrosion resistance of reinforced concrete: Role of emerging eco-friendly Elaeis guineensis/silver nanoparticles inhibitor. Construction and Building Materials, 188. pp. 555-568. ISSN 0950-0618. (Published)

Mohammad Amin, Mohamed (2010) Intake and exhaust ports flow investigation of 4-stroke SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Firdaus, Shamsudin (2008) Study and applications of a pneumatic acceletator for variety speed of punching. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Hadi, Ismail (2008) Rain-water PLC based detector and valve switcher. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohammad Hafizi, Jamaluddin and R., Mamat and Amir, Aziz and M. M., Noor and Ahmad Tamimi, Ahmad Termizi (2017) Development of Strand Burner Test by Using Aluminized AP/HTPB. In: 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, pp. 99-104. ISBN 9783038357445

Mohammad Hafizuddin, Mokhtar (2007) Regenerative chatter in end milling on mould aluminum via experimental. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Ahmad, M. R. and Asghar, A. and Tezara, C. and Jaafar, J. and Muhamad, Zalinawati (2020) Characterisation of the woven fabric of jute, ramie and roselle for reinforcement material for polymer composite. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1705-1710., 46 (169722). ISSN 2214-7853

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Cionita, Tezara (2019) Mechanical properties of mengkuang leave fibre reinforced low density polyethylene composites. In: Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites: Development, Characterization and Applications. Woodhead Publishing Series, 6 (2018). Woodhead Publishing Series, Sawston‎, ‎Cambridge, pp. 181-196. (Unpublished)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Tezara, Cionita and Jamiluddin, Jaafar and Efriyohadi, Agung and Ramli, Junid and Ahmad, Kholil (2019) Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites. The International Journal of Advanced Manufacturing Technology, 104 (1 - 4). pp. 1075-1086. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Thomas, Sabu and Jacob, Maya John and Jamiluddin, Jaafar and Tezara, Cionita (2019) Mechanical performance of hybrid woven jute-roselle-reinforced polyester composites. Polymers and Polymer Composites, 27 (7). pp. 407-418. ISSN 0967-3911. (Published)

Mohammad Izzad, Mohammad Idzlaluddin (2017) Threat assessment analysis for vehicle collision avoidance. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohammad Khyru, Aris (2009) Study of heat transfer coefficient for multi-jet air impinging cooling. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Mohammad Naqiuddin, Mohamad Salleh and M., Ishak and Aiman, Mohd Halil and Siti Rabiatull Aisha, Idris and F. R. M., Romlay (2017) Investigation on the effect of pulsed energy on strength of fillet lap laser welded AZ31B magnesium alloys. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-7., 238 (012009). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohammad Naqiuddin Fahmi, Fathli and Zulkifli, Md. Yusof (2021) Implementation study of field programmable gate array (FPGA) and complex programmable logic device (CPLD) in collision avoidance system using vhsic hardware description language (VHDL). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 52-60. ISSN 2637-0883. (Published)

Mohammad Rafiq, Radzuan (2012) Design and fabricate a gantry type of co2 laser cutting machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Safuan, Sheafi (2010) Application of microcontroller to control pneumatic actuator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Shafei, Ramli (2013) Experimental study of alternative tire pyrolysis oil performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Shahrul Nizam, Amin Nuddin and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and K., Kadirgama and D., Ramasamy and Wan Sharuzi, Wan Harun (2023) A study on adjustable height stand for temperature scanner. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 115-125. ISSN 2462-1943. (Published)

Mohammad Syahir Syahmi, Hassan (2013) Fabrication of aquaponic dry gravel plantation system for tomato plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Syazwan, Fauzi (2013) Design and development of laser CNC machine structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2013) Integrated Simulation Model for Composition and Properties of Gases in Hydrogen Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1242-1255. ISSN 1985-9325 (Print); 2180-1606 (Online). (Published)

Mohammed, A. A. and Bachtiar, Dandi and M. R. M., Rejab and Siregar, J. P. (2018) Effect of microwave treatment on tensile properties of sugar palm fibre reinforced thermoplastic polyurethane composites. Defence Technology, 14 (4). pp. 287-290. ISSN 22149147. (Published)

Mohammed, Ausama A. and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab and Syed Farhan, Hasany (2016) Physico-chemical Study of Eco-friendly Sugar Palm Fiber Thermoplastic Polyurethane Composites. BioResources, 11 (4). pp. 9438-9454. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Mohammed, Ausama Al-sarraf and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab and Syed Farhan, Hasany (2016) Physicochemical study of eco-friendly sugar palm fiber thermoplastic polyurethane composites. BioResources, 11 (4). pp. 9438-9454. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Abdulhadi, Hassan Abdulrssoul (2017) Fiber Laser Welding of Dissimilar 2205/304 Stainless Steel Plates. Metals, 7 (12). pp. 1-19. ISSN 2075-4701. (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2016) The Effect of Fiber Laser Parameters on Microhardness and Microstructure of Duplex Stainless Steel. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01024). ISSN 2261-236X

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2017) Effects of Heat Input on Microstructure, Corrosion and Mechanical Characteristics of Welded Austenitic and Duplex Stainless Steels: A Review. Metals, 7 (2). pp. 1-18. ISSN 2075-4701. (Published)

Mohammed, K. Mohammed and M. Kh., Abdolbaqi and Ibrahim, Thamir K. and R., Mamat and Awad, Omar I. (2016) Experimental and Numerical investigation of Heat transfer enhancement using Al2O3-Ethylene Glycol/Water Nanofluids in Straight Channel. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 1-9.. (Unpublished)

Mohammed, Kamil and M. M., Rahman (2015) Effect of Injection Hole Diameter on Operational Conditions of Common-Rail Fuel-Injection System for Portinjection Hydrogen-Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2383-2395. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman (2015) Performance Prediction of Spark-Ignition Engine Running on Gasoline-hydrogen and Methane-hydrogen Blends. Applied Energy, 158. pp. 556-567. ISSN 0306-2619. (Published)

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2011) Performance Evaluation of External Mixture Formation Strategy in Hydrogen-Fueled Engine. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 87-98. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohammed, M. Hasan and M., Ishak and M. R. M., Rejab (2017) Effect of Backing Material and Clamping System on the Tensile Strength Of Dissimilar AA7075-AA2024 Friction Stir Welds. The International Journal of Advanced Manufacturing Technology, 91 (9-12). pp. 3991-4007. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohammed Hamood Hezam, Alshameri and Oumer, Ahmed Nurye and Azizuddin, Abd Aziz (2021) Novel compact fin and tube heat exchanger made of reinforced composite plate fins. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohammed M., Hassan and M., Ishak and M. R. M., Rejab (2016) Influence of Machine Variables and Tool Profile on the Tensile Strength of Dissimilar AA7075-AA6061 Friction Stir Welds. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Mohd, Yusri and Tsuchiya, Kazuyoshi and Kajiwarad, Kagemasa and Kimura, Minoru (2012) Fluctuation of salivary α-amylase affected by the time change of injection. In: IEEE International Symposium on Micro-NanoMechatronics and Human Science (MHS) 2012 , 4-7 Novemver 2012 , Nagoya, Japan. pp. 24-28.. ISBN 978-1-4673-4813-3

Mohd Adib, Alias (2008) Study of sequential multipoint injection nozzle effect of compressed natural gas engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adnin, Hamidi (2013) Comparison of PRF and toluene/n-heptane mixture in the mechanism of compression ignition using transient species measurements and simplified model analysis. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Adnin, Hamidi (2016) Ignition mechanism analyzed through transient species measurements and its correlation with O-D and 3-D simulations for PRF and toluene n-heptane mixture. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Adzahari, Adnan (2009) Modeling the performance characteristics of hydrogen engine with fuel injection systems using GT-Power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adzlan, Mohd Azmi (2012) Experimental & numerical study on sheet metal lateral bending with both ends pinned. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Afiq, Mat Noor (2008) Implementation of PID controller on prasmatic control of universal stretch and bending machine (USBM) simplified model. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Aidil, Zaini (2008) The study on the performance of the gas turbine for power generation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Aiman, Ismail (2009) Experimental study of the laser beam cutting on acrylic sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aiman Shah, Abdullah (2008) Carbon Dioxide (CO2) laser cut quality of acrylic with different power levels. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aiman Syahmi, Kamarul Baharin and Ahmad Shahrizan, Abdul Ghani and Normawaty, Mohammad-Noor and Hasnun Nita, Ismail and Syafiq Qhushairy, Syamsul Amri (2022) Automatic phytoplankton image smoothing through integrated dual image histogram specification and enhanced background removal method. The Imaging Science Journal. pp. 1-23. ISSN 1368-2199 (Printed); 1743-131X. (Published)

Mohd Aiman Syahmi, Kamarul baharin and Ahmad Shahrizan, Abdul Ghani and Syafiq Qhushairy, Syamsul Amri and Normawaty, Mohammad-Noor and Hasnun Nita, Ismail (2023) Enhancement of Low-Quality Diatom Images using Integrated Automatic Background Removal (IABR) Method from Digital Microscopic Image. In: 2023 IEEE 13th Symposium on Computer Applications & Industrial Electronics (ISCAIE) , 20-21 May 2023 , Penang, Malaysia. 256 -261.. ISBN 9798350347326

Mohd Aizuddin, Abu Bakar (2008) Development of a PID controller for DC motor using Microsoft Visual Basic. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Akmal, Mat Ludin (2013) Design of pico-hydro turbine by using a pump as a generator. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Akramin, Mohd Romlay and Amirruddin, Abdul Kadir and Nasrul Azuan, Alang (2010) Hybrid Finite Element And Monte Carlo Analysis Of Cracked Pipe. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Akramin, Mohd Romlay (2016) Analysis of fatigue surface crack using the probabilistic s-version finite element model. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Akramin, Mohd Romlay and A. K., Ariffin and Masanori, Kikuchi and M., Beer and M. S., Shaari and M. N. M., Husnain (2018) Surface crack growth prediction under fatigue load using probabilistic S‑version finite element model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (522). pp. 1-14. ISSN 1806-3691. (Published)

Mohd Akramin, Mohd Romlay and Ahmad Syahrizan, Sulaiman and Rahman, M. M. and Mohd Ruzaimi, Mat Rejab and Al Emran, Ismail Formulation of initial flaw size for new crack growth under fatigue loading. , [Research Book Profile: Research Report] (Unpublished)

Mohd Akramin, Mohd Romlay and M. N. M., Husnain (2018) Sampling model in engineering analysis software for surface cracked structure. In: 7th International Conference on Computer Engineering and Mathematical Sciences 2018 (ICCEMS 2018) , 27 - 28 December 2018 , Langkawi, Malaysia.. p. 1.. (Unpublished)

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff (2023) Experimental and Simulation Approach; Investigation Effect of Axial Feed Rate to the Cutting Force in Dimple Milling Using Ball End Mill Tool. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 33-50.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Amin, At-Tasneem and Wan Azmi, Wan Hamzah and Oumer, Ahmed Nurye (2021) Thermal conductivity and dynamic viscosity of mono and hybrid organic- and synthetic-based nanofluids: A critical review. Nanotechnology Reviews, 10 (1). pp. 1624-1661. ISSN 2191-9097. (Published)

Mohd Aminudin, Jamlos and Abdul Hafiizh, Ismail and Mohd Faizal, Jamlos and Narbudowicz, Adam (2017) Hybrid Graphene–Copper UWB Array Sensor for Brain Tumor Detection via Scattering Parameters in Microwave Detection System. Applied Physics A, 123 (112). pp. 1-7. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

Mohd Amir Firdaus, Salleh (2010) Optimization of electrical discharge machine parameter on mild steel by using response surface methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amiruddin, Fikri and Fatin Fatihah, Asri and Wan Mohd Faizal, . and Hasyiya Karimah, Adli and R., Mamat and Azmi, W. H. and A. I., Ramadhan and Talal, Yusaf (2020) Effects of heat transfer based water for three square multilayer absorber solar collector. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Amiruddin, Fikri and Wan Mohcd Faizal, Wan Ishak and Hasyiya Karimah, Adli and Rizalman, Mamat and Wan Azmi, Wan Hamzah and Anwar Ilmar, Ramadhan (2022) TiO2-SiO2 nanofluids mixture with W/EG for solar water heating system: Thermal conductivity analysis based on different ratios. In: AIP Conference Proceedings, International Conference on Bioengineering and Technology (IConBET2021) , 24-25 May 2021 , Kelantan, Malaysia. pp. 1-8., 2454 (040008). ISBN 978-0-7354-4193-4

Mohd Amiruddin, Fikri and Wan Mohd Faizal, . and Hasyiya Karimah, Adli and R., Mamat and W. H., Azmi and Zafri Azran, Abdul Majid and Anwar Ilmar, Ramadhan (2021) Characteristic of TiO2-SiO2 nanofluid with water/ethylene glycol mixture for solar application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81 (2). pp. 1-13. ISSN 2289-7879. (Published)

Mohd Amirul Husaini, Saat (2012) Measurement and numerical simulation of internal air flow in faculty of mechanical engineering admin office ventilation system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Anwar, Jahrani (2009) Line following robot using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Arif, Mohd Ariffin (2008) Design and fabricate a speed reducer gearbox. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Arif, Mokti (2008) A surface roughness prediction model for laser beam cutting (LBC) on acrylic sheets. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ashraf, Ahmad (2010) Non-collocated Fuzzy Logic and Input Shaping Control Strategy for Elastic Joint Manipulator: Vibration Suppression and Time Response Analysis. In: Fourth Asia International Conference on Mathematical/Analytical Modelling and Computer Simulation (AMS2010) , 26 - 28 May 2010 , Kota Kinabalu, Borneo. .

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli and Najidah, Hambali and Nurul Hazlina, Noordin (2010) Active Sway Control of a Lab-Scale Rotary Crane System. In: The 2nd International Conference on Computer and Automation Engineering (ICCAE 2010) , 26-28 Februari 2010 , Singapore. 408-412 ..

Mohd Ashraf, Ahmad and Mohd Anwar, Zawawi (2010) Comparison of Optimal and Intelligent Sway Control for a Lab-Scale Rotary Crane System. In: The 2nd International Conference on Computer Engineering and Applications (ICCEA 2010) , 19-21 Mac 2010 , Bali Island, Indonesia. pp. 229-234..

Mohd Ashraf, Ahmad and Mohd Syakirin, Ramli and Mohd Anwar, Zawawi and Raja Mohd Taufika, Raja Ismail (2010) Implementation of Input Shaping in Hybrid Control Schemes of a Lab-Scaled Rotary Crane System. In: International Conference on Industrial Technology , 14-17 Mac 2010 , Vi a del Mar, Chile. pp. 530-534..

Mohd Ashraf, Ahmad and Muhammad Salihin, Saealal and Raja Mohd Taufika, Raja Ismail and Mohd Anwar, Zawawi and Ahmad Nor Kasruddin, Nasir and Mohd Syakirin, Ramli (2011) Single Input Fuzzy Controller With Command Shaping Schemes For Double-Pendulum Type Overhead Crane. In: AIP Conference Proceedings: The 4th Global Conference On Power Control And Optimization , 02-04 December 2010 , Damai Puri, Kuching, Sarawak. p. 113., 1337. ISBN 978-0-7354-0893-7

Mohd Asri, Ibrahim (2012) A simplification of reading fluid properties using Microsoft Excel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aswad, Abd Wahab (2009) Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and Mohd Mawardi, Saari and Tsukada, Keiji and Nurul A’in, Nadzri (2019) An MFL probe using shiftable magnetization angle for front and back side crack evaluation. In: 15th IEEE Colloquium on Signal Processing and its Applications (CSPA 2019) , 8-9 March 2019 , Penang, Malaysia. pp. 1-5.. ISBN 978-153867563-2

Mohd Aufa Hadi Putera, Zaini and Zulkifly, Ab. Aziz and Mohd Mawardi, Saari and Aiman, Mohd Halil and Nurul A’in, Nadzri and Ahmad Jamil Sulaiman, Hanifah (2020) Development of an unsaturated differential magnetic probe for the visualization of back-side slits with different directions on carbon steel plate. In: 11th IEEE Control and System Graduate Research Colloquium, ICSGRC 2020 , 8 August 2020 , Shah Alam. pp. 1-4. (9232487). ISBN 978-172815313-1

Mohd Azam, Musa and A. R., Razali and Nazrul Idzham, Kasim (2014) Grain and Feature Size Effect on Material Behavior for Micro-Sheet-Forming. Applied Mechanics and Materials, 680. pp. 77-80. ISSN 1662-7482. (Published)

Mohd Azhar, Azmi (2008) PI controller for battery charger system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Azizul, Ghafur Rahimi (2008) Temperature monitoring system. Fakulti Kejuruteraan Elektrik Dan Elektronik , Universiti Malaysia Pahang.

Mohd Azlan, Zulkarnain and Mohamad Khadri, Shahriman and Ahmmad Shukrie, Md Yudin (2019) Drying characteristics of cocoa bean in a swirling fluidized bed dryer: an experimental study. In: UTP-UMP-UAF Symposium on energy system 2019 (SES2019) , 1-2 Oct. 2019 , UMP Library. pp. 1-10.. (Unpublished)

Mohd Azmir, Mohd Azhari (2014) A new method for waterjet peening process improvement using a combination of waterjet surface hardening and polishing. , [Research Book Profile: Research Report] (Unpublished)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2015) Parametric Optimization Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2591-2599. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Azraai, Mohd Razman (2014) Bouc-Wen model parameter identification for a new magneto-rheologigal fluid damper using particle swarm optimization. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Priyandoko, Gigih).

Mohd Azraai, Mohd Razman (2019) Hunger behaviour classification of Lates Calcarifer using machine learning for automatic demand feeder through image processing. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri, Abdul Rahman (2013) 3 axis CNC machine controllers. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Azri, Aris (2009) Whole energy balance for 1kw steam power plant. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri Hizami, Rasid (2016) Contribution to multi-physical studies of small synchronous-reluctance machine for automotive equipment. PhD thesis, Université de Technologie de Compiègne (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri Hizami, Rasid and Muhammad Nor Azril, Zulkafli and Daing Mohamad Nafiz, Daing Idris and Nurul Fatimah, Abdullah (2022) Experimental evaluation of temperature distribution in armature of a brushed dc machine using thermal imaging. In: 2022 International Conference on Electrical Machines, ICEM 2022 , 5-8 September 2022 , Valencia. pp. 1927-1933. (183486). ISBN 978-166541432-6

Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Mohmad Sairaji, Muhamad Imran and A. R., Razali and Mohamad Heerwan, Peeie and Muhammad Izhar, Ishak and Ospina, Alejandro and Lanfranchi, Vincent (2018) Preliminary thermal evaluation of actuator for steer-by-wire vehicle. IEEE Transactions on Vehicular Technology, 67 (12). pp. 11468-11474. ISSN 0018-9545. (Published)

Mohd Azrul Hisham, Mohd Adib (2010) Computational Analysis: Fluid Structure Interaction Model Of The Mitral Valve Leaflet. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Azrul Hisham, Mohd Adib and Mohd Firdaus, Jaafar (2013) Review: Modelling of Meniscus of Knee Joint During Soccer Kicking. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8..

Mohd Azrul Hisham, Mohd Adib and Mohd Firdaus, Mohd Jaafar and Nur Hazreen, Mohd Hasni (2013) Review: Modeling of Meniscus of Knee Joint During Soccer Kicking. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9., 50 (012027). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Azrul Hisham, Mohd Adib (2023) Penyelidikan berteknologi mampu memartabatkan golongan OKU. Create . ISSN 1823-7487

Mohd Azrul Hisham, Mohd Adib and A. R., Ismail and F., Adnan and K., Kadirgama and H. A., Salaam and Zulkifli, Ahmad@Manap and Nasrul Hadi, Johari and Zulfika, Anuar and N. S. N., Azmi (2012) Computational analysis on performance of thermal energy storage (TES) diffuser. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (012015). ISSN 1757-899X

Mohd Azrul Hisham, Mohd Adib and Chik Ming, Mok and Nur Afikah, Khairi @ Rosli and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat (2021) CardioVASS device: For cardiology trainee. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni and Narimah, Daud and Nor Shahizan, Mohd Redzuan (2018) Enhancing the WRist-T device using touchscreen panel for traumatic brain injury patient. In: IEEE-EMBS Conference On Biomedical Engineering And Sciences (IECBES 2018) , 3 - 6 Disember 2018 , Borneo Convention Centre Kuching, Sarawak, Malaysia. pp. 1-5.. (Unpublished)

Mohd Azrul Hisham, Mohd Adib and K., Kadirgama and N.H, Mohd Hasni and K., Osman and O., Maskon (2012) Prediction of Blood Flow Velocity and Leaflet Deformation Via 2D Mitral Valve Model. Journal of Mechanical Engineering and Sciences (JMES) , 2, Jun. pp. 217-225. ISSN 2231-8380 . (Published)

Mohd Azrul Hisham, Mohd Adib and Lim, Sheh Hong and Mohd Shafie, Abdullah and Radhiana, Hassan and Wada, Shigeo (2020) A perspective review: Technical study of combining phase contrast magnetic resonance imaging and computational fluid dynamics for blood flow on carotid bifurcation artery. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7609-7621. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Azrul Hisham, Mohd Adib and Mohammad Asyrul, Abd Rashid and Nur Hazreen, Mohd Hasni (2019) Development of smart infant-wrap (InfaWrap) device for neonates. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 186-187.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Muhamad Hazim, Khalili and Nur Hazreen, Mohd Hasni (2019) Development of Brady-Tachy heart automotive monitoring (BT-Heartomotive) device to prevent motor-vehicle accident. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 118-119.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Muhammad Irfan, Abdul Jalal and Nur Hazreen, Mohd Hasni (2019) Improvement of the BT-heartomotive device for avert car accident using MY Brady Tachy Heart mobile application. In: 6th International Conference on Bioinformatics Research and Applications (ICBRA 2019) , 19-21 December 2019 , Seoul National University, Seoul, South Korea. pp. 1-5.. (Unpublished)

Mohd Azrul Hisham, Mohd Adib and Muhammad Nor Hakim, Hassan (2021) Covid run game serious game for health : Covid-19 preventive care. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Azrul Hisham, Mohd Adib and Muhammad Shahminan, Lukman and Nur Hazreen, Mohd Hasni (2019) Development of an integrated vaccine system (IVS) for vaccination healthcare database. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 155-156.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Norashikin, Nor Tuah and Nur Hazreen, Mohd Hasni and Kahar, Osman (2013) Prediction of Blood Pattern in S-Shaped Model of Artery under Normal Blood Pressure. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 496-503. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni (2020) Enhanced brady-tachy heart automotive (BT-Heartomotive) device for heart rate monitoring during driving. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). 7599 -7606. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Azrul Hisham, Mohd Adib and Nurul Najihah, Mohd Nazri and Nur Hazreen, Mohd Hasni (2018) Phase contrast-MRI Integrated CFD Simulation: effect of Cthres on blood flow fields for patient- specific cerebrovascular. In: 7th International Workshop on Innovative Simulation for Health Care, IWISH 2018 , 17 - 19 Sep 2018 , Danubius Health Spa Resort Margitsziget Budapest, Hungary. pp. 1-7.. ISBN 978-888574115-7

Mohd Azrul Hisham, Mohd Adib and Rabiatul Aisyah, Ariffin and Mohd Hanafi, Abdul Rahim and Muhammad, Rais Rahim and Muhammad Shazzuan, Sharudin and Afif Awaluddin, Othman and Ahmad Hijran, Nasaruddin and Afiq Ikmal, Zahir and Idris Mat, Sahat and Nurul Shahida, Mohd Shalahim and Narimah, Daud and Nur Hazreen, Mohd Hasni (2022) Development of Physiotherapy-Treadmill (PhyMill) as Rehabilitation Technology Tools for Kid with Cerebral Palsy. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 829-838., 730 (262829). ISSN 18761100 ISBN 978-981334596-6

Mohd Azrul Hisham, Mohd Adib and Rahim, Md Abdur and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2022) Pediatrics technology applications : Enhance the bilirubin jaundice (BiliDice) device for neonates using color sensor. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 839-847., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Mohd Azrulnizam, Abd. Aziz (2012) Investigation of machining performance of coated alumina cutting tool insert with sand blasting surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Bakar, Mohd Mishani and Ong, Zhi Chao and Chong, Wen Tong and Khoo, Shin Yee and Abdul Ghaffar, Abdul Rahman (2015) A Simplified Technique to Distinguish Unbalance and Misalignment Using Frequency Domain Operating Deflection Shape. Jurnal Teknologi (Sciences and Engineering), 76 (8). pp. 1-4. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Dzohairy, Mohammad Mohsan (2007) Design and fabrication of toolbox. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Dzulfahizi, Mohamad Saleh (2012) One dimensional engine modeling of single cylinder four stroke engine for different cng injection strategy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Dzulqarnain, Ahmad Suhaimi (2007) Development of compress air transportation (CAT) for alternative energy utilization. Faculty of Mechanical Engineering, Universiti MalaysiaPahang.

Mohd Erie Adnin, Zamri (2014) Wind load effect to the ratio cover structure. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Erman Fairuz, Zaidi (2013) Leakage detection in pipelines using empirical mode decomposition. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Ezuwanizam, Masral (2010) Optimization of tool life in miling. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadhlan, Mohd Yusof (2021) Monitoring and assessment of weld penetration condition during pulse mode laser welding using air-borne acoustic signal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahadzir, Ishak@Muhammad).

Mohd Fadhlan, Mohd Yusof and C. K. E., Nizwan and S. A., Ong and M. Q. M., Ridzuan (2016) Clustering of Frequency Spectrum from Different Bearing Fault using Principle Component Analysis. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Mohd Fadhlan, Mohd Yusof and Che Ku Eddy Nizwan, Che Ku Husin and Nordin, Jamaludin and S., Abdullah (2011) Acoustic emission behavior during fatigue crack of API5LX70 gas pipeline steel. In: International Conference on Information Engineering for Mechanics and Materials (ICIMM 2011) , 13-14 August 2011 , Shanghai, China. pp. 148-152., 80-81. ISSN 16609336 ISBN 978-303785212-5

Mohd Fadhlan, Mohd Yusof and M., Ishak (2019) L-statistical analysis of sound signal acquired from pulse mode laser welding for characterising weld geometry. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6987-7006. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2021) Acoustic methods in real-time welding process monitoring: Application and future potential advancement. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8490 -8507. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2020) Classification of weld penetration condition through synchrosqueezed-wavelet analysis of sound signal acquired from pulse mode laser welding process. Journal of Materials Processing Technology, 279 (116559). pp. 1-13. ISSN 0924-0136. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2020) Weld depth estimation during pulse mode laser welding process by the analysis of the acquired sound using feature extraction analysis and artificial neural network. Journal of Manufacturing Processes. pp. 1-16. ISSN 1526-6125. (In Press / Online First) (In Press / Online First)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali and M. R., Islam (2014) Analysis of an Air Borne Acoustic Signatures from Welding Process Using Empirical Mode Decomposition. Advanced Materials Research, 889 (890). pp. 770-775. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. N., Salleh and M. F., Ghazali (2023) Defect identification during pulse mode laser welding process through the pattern recognition analysis of the acquired sound frequency spectrum. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 793-802.. ISSN 2195-4356 ISBN 978-981-19-1456-0

Mohd Fadhlan, Mohd Yusof and M. A., Kamaruzaman and M., Zubair and M., Ishak (2016) Detection Of Defects On Weld Bead Through The Wavelet Analysis Of The Acquired Arc Sound Signal. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2031-2042. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and Mahadzir, Ishak and Mohd Fairusham, Ghazali (2020) Detection of irregularities on weld bead from the L-Statistic analysis of the acquired sound during pulse mode laser welding process. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-9., 788 (012015). ISSN 1757-8981

Mohd Fadhlan, Mohd Yusof and Muhammad Aizat, Kamaruzaman and M., Ishak and M. F., Ghazali (2016) Porosity Detection by Analyzing arc Sound Signal Acquired During the Welding Process of Gas Pipeline Steel. The International Journal of Advanced Manufacturing Technology. pp. 1-10. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohd Fadhlan, Mohd Yusof and Ummu Kulthum, Jamaludin and S., Abdullah and Z.H., Hanafi and M.S., M. Zain (2012) Monitoring and Assessment of Acoustic Emission Signatures During Fatigue Mechanism of Api5lx70 Gas Pipeline Steel. Journal of Mechanical Engineering and Sciences (JMES), 2 (June 2). 237 -250. ISSN 2231-8380 . (Published)

Mohd Fadhli, Mohd Nasir (2007) Design of a blow off valve for turbocharged engine applications. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadly, Nur Yakim (2007) The design and analysist of a low cost tire endurance testing machine frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadzil, Abdul Rahim (2021) Modelling and calibration of high-pressure direct injection compressed natural gas engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, B. Jaafar).

Mohd Fadzil, Abdul Rahim and A. A., Jaafar and R., Mamat and Zahari, Taha (2020) Parametric study of CNG-DI engine operational parameters by using analytical vehicle model. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 611-616.. ISBN 978-981-15-0950-6

Mohd Fadzil, Abdul Rahim and M. M., Rahman and R. A., Bakar (2012) Cycle engine modelling of spark ignition engine processes during wide-open throttle (WOT) engine operation running by gasoline fuel. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012041). ISSN 1757-899X

Mohd Fadzil, Abdul Rahim and Zahari, Taha and Rizalman, Mamat (2017) Injection characteristics study of high-pressure direct injector for Compressed Natural Gas (CNG) using experimental and analytical method. IOP Conference Series: Materials Science and Engineering, 257. pp. 1-21. ISSN 1757-8981 (Printed); 1757-899X(Online). (Published)

Mohd Fadzil, Rahim and Abdul Aziz, Jaafar and Rizalman, Mamat and Zahari, Taha Performance assessment of direct injection compressed natural gas vehicle at different injection pressures using speed-sweep test method. Materials Science and Engineering, Volume 788 (012068). ISSN 1757-899X. (Published)

Mohd Fadzil Faisae, Ab Rashid and Muhammad Ammar, N. M. (2022) A novel Tiki-Taka algorithm to optimize hybrid flow shop scheduling with energy consumption. Engineering and Applied Science Research, 49 (2). pp. 189-200. ISSN 2539-6218. (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Oumer, Ahmed Nurye (2022) Modelling and optimization of energy efficient assemblyline balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X. (Published)

Mohd Fadzil Faisae, Ab. Rashid (2021) A novel tiki-taka algorithm for engineering optimisation. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Fadzli, Mat Lazim (2012) Design and simulation of prechamber with high pressure CNG injector system for single cylinder four stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadzli, Mansor (2009) Preliminary design of double rubber belt continuosly variable transmission (CVT). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadzli, Mohd Noris (2006) Comparison between ziegler-nichols and cohen-coon method for controller tunings. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Jasni (2012) Experimental determination of forced convective heat transfer coefficient with nanofluid in a plain tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Md Yusuf (2010) Performance of uncoated cutting tools when machining mild steel and aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Othman and Abdul Adam, Abdullah and Syuhaida, Asri and Zulkifli, Azmi and Mohd Hafizil, Mat Yasin and Zuhaira, Abdullah and R., Mamat (2019) A comparative study on performance characteristics of diesel engine fuelled by biodiesel blends with and without Ge-132 additive. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012122). ISSN 1757-899X

Mohd Fahmi, Othman and Nurul Syuhaida, Mohd Asri and Abdul Adam, Abdullah and Mohd Kamal, Kamaruzzaman (2019) Performance and emission characteristics of single cylinder diesel engine fueled with organic germanium. In: 3rd International Conference On The Sustainable Energy And Environment Development (SEED2019) , 15 - 24 Oct. 2019 , Krakow, Poland. pp. 1-24.. (Unpublished)

Mohd Faizal, Jasni (2008) Design and fabrication of ceiling fan blades cleaner. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Faizal, Ali Akhbar (2020) Numerical and experimental investigations on temperature and thermal damage in cortical bone drilling. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Razlan, Yusoff).

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Comparison of bone temperature elevation in drilling of human, bovine and porcine bone. In: 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO , 13-14 June 2019 , Sheffield; United Kingdom. pp. 411-414., 82. ISSN 2212-8271

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: Effect of drill bit geometries on thermal osteonecrosis risk regions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (2). pp. 207-218. ISSN 0954-4119. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Drilling of bone: thermal osteonecrosis regions induced by drilling parameters. Biomedical Physics & Engineering Express, 5 (6). 065003-1. ISSN 2057-1976. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2020) Fast & Injurious: Reducing thermal osteonecrosis regions in the drilling of human bone with multi-objective optimization. Measurement, 152 (107835). pp. 1-15. ISSN 0263-2241. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2019) Multi-objective optimization of surgical drill bit to minimize thermal damage in bone-drilling. Applied Thermal Engineering, 157. pp. 113583-113594. ISSN 1359-4311. (Published)

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2018) Optimization of drilling parameters for thermal bone necrosis prevention. Technology and Health Care, 26 (4). pp. 621-632. ISSN 0928-7329 (Print); 1878-7401 (Online). (Published)

Mohd Faizal, Ali Akhbar and Akmal Wani, Sulong (2021) Surgical drill bit design and thermomechanical damage in bone drilling: A review. Annals of Biomedical Engineering, 49 (1). 29 -56. ISSN 0090-6964. (Published)

Mohd Faizal, Ali Akhbar and Mukhtar, Malik and A. R., Yusoff (2018) Effects of drilling parameters in numerical simulation to the bone temperature elevation. In: Advanced nanotechnology in engineering and medical sciences (ANEMS) international conference 2017 , 20-21 November 2017 , Langkawi, Malaysia. pp. 1-4., 1948 (020002). ISBN 978-0-7354-1643-7

Mohd Faizal, Aziz (2010) Optimization of tool life using in milling using radial basis function network. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faizal, Mohd Pauzi (2008) Design of two stroke SI linear engine with spring mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faizol Hafiz, Ab Majid (2012) PID controller application on cutting tool vibration in milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 76-87. ISSN 1368-2148. (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Osada, Toshiya and S. A., Che Ghani and Dayangku Noorfazidah, Awang Shri (2017) Effect of sintering parameters on physical properties of SS 316L alloy compact. Journal of Mechanical Engineering, SI 3 (2). pp. 123-131. ISSN 1823- 5514 (Print); 2550-164X (Online). (Published)

Mohd Faizul Farhan, Ahmad Hamidi and Wan Sharuzi, Wan Harun and Faiz, Ahmad and Abu Bakar, Sulong (2016) Effect of Binders on Physical and Mechanical Properties of Stainless Steel 316L Alloy Fabricated by Metal Injection Moulding Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 85-88..

Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Tanti Zanariah, Shamshir Ali and Billy, Anak Sup (2015) Design and Stress Simulation of Crankshaft for Slider Crank-Drive Stirling Engine. Applied Mechanics and Materials, 699. pp. 678-683. ISSN 1662-7482. (Published)

Mohd Farid, Ismail (2022) Performance of polyvinyl ether based nanolubricants in residential air conditioning. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Mohd Farid, Ismail and Wan Azmi, Wan Hamzah and Rizalman, Mamat and Sharma, Korada Viswanatha and Nurul Nadia, Mohd Zawawi (2023) Stability assessment of polyvinyl-ether-based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (23). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Hafiz Muhammad, Ali (2023) Thermal and tribological properties enhancement of PVE lubricant modified with SiO2 and tio2 nanoparticles additive. Nanomaterials, 13 (42). pp. 1-18. ISSN 2079-4991. (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Sharma, Korada Viswanatha and Ali, Hafiz Muhammad (2023) Extensive stability assessment of TiO/polyvinyl ether nanolubricant with physical homogenization. Lubricants, 11 (67). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Sharma, Korada Viswanatha and Ali, Hafiz Muhammad (2023) Extensive stability assessment of tio/polyvinyl ether nanolubricant with physical homogenization. Lubricants, 11 (67). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup (2015) Thermodynamic Cycle Evaluation of Rhombic Drive Beta-configuration Stirling Engine. In: Energy Procedia, Vol. 68, 2nd International Conference on Sustainable Energy Engineering and Application (ICSEEA 2014) , 14-15 Oktober 2014 , Bandung, Indonesia. pp. 419-428., 68. ISSN 1876-6102

Mohd Farid, Zainudin and R. A., Bakar and K., Kadirgama (2019) Effects of phase angle setting, displacement, and eccentricity ratio based on determination of rhombic-drive primary geometrical parameters in beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012047). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Farid, Zainudin and R. M., Faiz and R. A., Bakar and K., Kadirgama (2019) Thermodynamic performance prediction of rhombic-drive beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012048). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Farid, Zainudin and Rosli, Abu Bakar and Kadirgama, Kumaran and Gan, Leong Ming (2020) Kinematic and thermodynamic operational analysis of rhombic-drive Stirling engine prototype. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012070). ISSN 1757-8981

Mohd Fariq, Ahmad Jamil (2014) Wind hazard risk assessment due to topographical condition. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Fathuddin, Mohd Sunif and Mohd Noor Firdaus, Haron and F. R. M., Romlay (2018) Heat energy modelling of travelling wave piezoceramic ultrasonic motor. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (01009). ISSN 2261-236X

Mohd Fauzani, Mohd Nawi (2008) CFD simulation and validation of the in-cylinder within a motored two-stroked SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fauzi, Muhammad (2010) Comprehensive analysis of a light weight lift system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fauzie, Ramli (2008) Thermal analysis of vehicle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fawzi, Zamri and A. R., Yusoff (2015) Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process. Advances in Materials and Processing Technologies, 1 (1-2). pp. 27-35. ISSN 2374-068X (Print), 2374-0698 (Online). (Published)

Mohd Fikri Azri, Mat Saad (2008) Design and development of motored engine for two-stroke spark ignition (SI) engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Ahmad Sani (2007) Design and fabrication transparent trolley toolbox. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Firdaus, Ahmad Sani (2010) Effect of soil resistivity in Pekan campus to the corrosion behavior of steel pipe system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Hassan and Syazani, Mohd Sanosi and Ja'afar, Othman and Mohd Shahrul Azmi, Mohamad Yusoff (2023) Advancing balancing machine technology: A cost-effective solution for laboratory and small-medium enterprises. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9742 -9752. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Firdaus, Mahamad Ali and Baba, Md. Deros and Ahmad Rasdan, Ismail (2012) Biomechanics analysis for dominant leg during instep kicking. Jurnal Teknologi (Sciences and Engineering), 59. pp. 37-40. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Firdaus, Mansor (2008) Design and prototyping a peristaltic pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Mohd Firdaus, Mohd Rosli (2013) Design, analysis & fabrication of a scaled down model of an open channel flow flume and weir. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Musa (2010) Building energy analysis using cooling load factor/cooling load temperature different (CLF/CLTD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus Naqiuddin, Che Pa (2008) Exhaust port flow study on various cylinder head using flowbench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdauz, A. Samad (2009) Exhaust gas calorimeter for four stroke gasoline engine simulation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firzikri, Abd Sata (2009) A study of pipe leak source location using single channel acoustic emissions (AE) technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafeez, Alias (2010) Theoretical analysis of absorption chiller system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafiezal, Nordin (2013) Development of shaker ( controller ). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Ali (2021) Analysis of antioxidant additives-biodiesel blends on engine performance and emission characteristics of a diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Adam, Abdullah).

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin (2019) Effect of BHA and BHT antioxidant additives on engine performance and emission of a CI engine fueled with a palm oil methyl ester-diesel fuel blend. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020051). ISBN 978-0-7354-1787-8

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin and Mohd Kamal, Kamaruzzaman (2020) Cyclic pressure variations in a small diesel engine fueled with biodiesel and antioxidant blends. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7851 -7857. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin and Mohd Kamal, Kamaruzzaman and Mohd Fahmi, Othman (2020) Mitigation of NOx emission by monophenolic antioxidants blended in POME biodiesel blends. Greenhouse Gases: Science and Technology, 10 (4). pp. 829-839. ISSN 2152-3878. (Published)

Mohd Hafiz, Ali and Mohd Kamal, Kamaruzzaman and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah (2019) Cyclic pressure variations in a single-cylinder diesel engine fueled with biodiesel and antioxidant blends. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-2.. (Unpublished)

Mohd Hafiz, Omar (2009) Design and implementation of PID controller for DC motor using PIC. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hafiza, Abdul Kadir and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2021) Investigation on welding distortion in stainless steel sheet using gas tungsten arc welding process. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1674-1679., 46 (Part 4). ISSN 2214-7853

Mohd Hafizi, Mohammad Yusoff and N. M. M., Ammar and Idris, Mat Sahat (2015) Study on the Behavior of Particles in High Reynolds Number in Semi Ellipse Lid Driven Cavity. In: Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS) 2014 Vol II , 12-14 March 2014 , Hong Kong. .

Mohd Hafizi, Zohari (2022) Fiber Bragg Grating Gap Sensor as An Innovative Idea for Critical Flange Monitoring. FTKMA Bulletin, 3 . p. 16. ISSN 2773-594X

Mohd Hafizi, Zohari (2019) A study of progressive damage detection in thin-walled composite structures using an embedded fiber Bragg grating – acoustic emission hybrid system. , [Research Report: Research Report] (Unpublished)

Mohd Hafizi, Zohari and Nur Ainaa Adhreena, Muhamad Shukri and Epin, Vorathin and Mohd Padzly, Radzi (2021) Smart bolt for digital bolted joint monitoring system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Hafizil, Mat Yasin (2018) Investigation on cyclic variations of a diesel engine operating with alcohols and biodiesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rizalman, Mamat).

Mohd Hafizil, Mat Yasin and Ahmad Fitri, Yusop and R., Mamat and Abdul Adam, Abdullah and N. H., Badrulhisham (2018) Comparison of the Cyclic Variation of a Diesel-Ethanol Blend in a Diesel Engine. In: IOP Conference Series: Earth and Environmental Science, 9th International Conference on Environmental Science and Technology , 20-22 June 2018 , Prague, Czech Republic. pp. 1-7., 182 (012020). ISSN 1755-1315

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Ahmad Fitri, Yusop and G., Najafi and Azri, Alias (2015) Effect of Low Proportion Palm Biodiesel Blend on Performance, Combustion and Emission Characteristics of a Diesel Engine. Energy Procedia, 75. pp. 92-98. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Mohd Hafiz, Ali (2015) Fundamental Study of Dual Fuel on Exhaust Gas Recirculation (EGR) Operating with a Diesel Engine. Applied Mechanics and Materials, 773. pp. 415-419. ISSN 1662-7482. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Mutalib, Leman and Amir, Khalid and Noreffendy, Tamaldin (2014) Experimental Investigation on Biodiesel-Ethanol-Diesel Blends Operating with a Diesel Engine. Applied Mechanics and Materials, 465-46. pp. 221-225. ISSN 1662-7482. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Abdul Adam, Abdullah and Mohd Hafiz, Ali and Mohd Fahmi, Othman (2017) Cylinder Pressure Cyclic Variations in a Diesel Engine operating with Biodiesel-Alcohol Blends. In: 9th International Conference On Applied Energy (ICAE 2017) , 21-24 August 2017 , Cardiff, United Kingdom. pp. 1-6.. ISSN 1876-6102

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Amir, Aziz and G., Najafi (2015) Comparative Study on Biodiesel-Methanol-Diesel Low Proportion Blends Operating with a Diesel Engine. Energy Procedia, 75. pp. 10-16. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Daing Mohamad Nafiz, Daing Idris and Yusaf, Talal and Rasul, Muhammad and G., Najafi (2017) Study of a Diesel Engine Performance with Exhaust Gas Recirculation (EGR) System Fuelled with Palm Biodiesel. Energy Procedia, 110. pp. 26-31. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Perowansa, Paruka and Talal, Yusaf and G., Najafi (2015) Effects of Exhaust Gas Recirculation (EGR) on a Diesel Engine Fuelled with Palm-Biodiesel. Energy Procedia, 75. pp. 30-36. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Rafidah, Rahim and Amir, Aziz and Liyana, Amer Shah (2013) Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives. Procedia Engineering, 53. pp. 701-706. ISSN 1877-7058. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ali, Obed Majeed and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and I. M., Yusri and Rasul, Muhammad (2017) Study of Diesel-biodiesel Fuel Properties and Wavelet Analysis on Cyclic Variations in a Diesel Engine. Energy Procedia, 110. pp. 498-503. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop (2013) Cyclic Variations of Combustion Characteristics in Diesel Engine Operating With B20 Blends with Alcohol Additives. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished)

Mohd Hafizil, Mat Yasin and R., Mamat and G., Najafi and Ali, Obed Majeed and Ahmad Fitri, Yusop and Mohd Hafiz, Ali (2017) Potentials of Palm Oil as New Feedstock Oil for a Global Alternative Fuel: A review. Renewable and Sustainable Energy Reviews, 79. pp. 1034-1049. ISSN 1364-0321. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and K. V., Sharma and Ahmad Fitri, Yusop (2012) Influence of Palm Methyl Ester (PME) as an Alternative Fuel In Multicylinder Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 331-339. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Syazwana, Sapee and Ahmad Fitri, Yusop and Mohd Hafiz, Ali (2020) Analysis of cylinder pressure cyclic variability operating with butanol blends in a diesel engine. In: Energy Security and Chemical Engineering Congress, ESChE 2019 , 17-19 July 2019 , Kuala Lumpur; Malaysia. pp. 1-6., 736 (3). ISSN 1757-8981

Mohd Hafizil, Mat Yasin and Talal, Yusaf and R., Mamat and Ahmad Fitri, Yusop (2014) Characterization of A Diesel Engine Operating with A Small Proportion of Methanol as a Fuel Additive in Biodiesel Blend. Applied Energy, 114. pp. 865-873. ISSN 0306-2619. (Published)

Mohd Hafizu, Hasan Basri (2012) Experimental and analytical evaluation of bending for stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizu, Zakaria (2019) Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hafizu, Zakaria and Saiful Anwar, Che Ghani and Wan Sharuzi, Wan Harun and Zuriadi, Zaulkafilai and Siti Rohaida, Mohamed (2017) Fabrication of aluminium internally cooled cutting tool by means of selective laser melting (SLM). Journal of Mechanical Engineering, SI 3 (1). pp. 185-198. ISSN 1823-5514. (Published)

Mohd Hafizuddin, Abdul Rahim (2013) Spray development and combustion simulation for simple injection chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizuddin, Hasnan (2009) Control system for modern house. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hairul Nizam, Mohamed (2008) Investigation of aluminum cooling coil in condenser application using computational fluid dynamic (CFD). Faculty Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hamisa, Abdul Hamid (2023) Characterization, performance and optimization of nanolubricants in automotive air-conditioning with electrically-driven compressor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Mohd Hamka, Mohd Jaapar (2013) Design and development of plasma CNC machine structure (plate). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanaffi, Othman (2009) Analysis of vibration in cam follower system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanafi, Muhammad Sidik (2020) Development of a new robust hybrid automata algorithm based on surface electromyography (SEMG) signal for instrumented wheelchair control. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hanafi, Muhammad Sidik (2012) Research on spiral movement robot. Masters thesis, Tokyo, Japan : Takushoku University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hanif, Ab Hamid (2010) Energy loss through the steam trap in a steam system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanif, Mokhtar (2008) Design and and analysis of platform motorcycle dynamometer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Haslizam, Abdullah (2021) Development of an open-architecture temperature data logger for hydro-distillation agarwood oil extractor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Haslizam, Abdullah and Saiful Anwar, Che Ghani and Siti Rohaida, Mohamed (2018) Experiment and Numerical Studies on Heat Loss in a Hydro-Distillation with Various Insulations. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-7., 225 (02014). ISSN 2261-236X

Mohd Hasnun Arif, Hassan and Zahari, Taha and Mohd Ali Hanafiah, Shaharudin and Lim, Kok Wee and Zulfika, Anuar (2018) Development of a soccer ball launching device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 591-598. ISBN 9789811087875

Mohd Hasnun Ariff, Hassan (2012) Design of a dynamometer engine coupling shaft. Masters thesis, Universiti Malaya (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hasnun Ariff, Hassan and Muhammad Aizzat, Zakaria and Muhammad Amirul, Abdullah and Anwar, P. P. Abdul Majeed (2018) Badminton agility training device. , [Research Book Profile: Research Report] (Unpublished)

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2017) Analytical modelling of protective headgear for soccer players. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 66-67. ISBN 9789670257884

Mohd Hasnun Ariff, Hassan and Zahari, Taha and Iskandar, Hasanuddin and Mohd Jamil Mohamed, Mokhtarudin (2018) Mechanics of Soccer Heading and Protective Headgear. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore. ISBN 978-981-13-0271-8

Mohd Hasrul Naim, Md. Rahim (2009) Design and analysis a new simple tire nut opener. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Haziq, Khairul Salleh (2013) Two wheeled balanced vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Haziq, Nordin (2009) Coconut husk remover. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazmie, Hamdan (2010) Exhaust emission of waste plastic disposal fuel on single cylinder YANMAR diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazwan, Abd Latif (2013) Estimation of operational intention and personal adaptation in power assist system. Masters thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hazwan, Yusof and Amirul Nawaf, Esa and Muhammad Fadhli, Suhaimi (2023) Thermal Comfort Attainment by Personal Vortex Tube Cooling Device. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer Science and Business Media Deutschland GmbH, pp. 263-271. ISBN 978-981-19-6687-3

Mohd Hazwan, Yusof and Katanoda, Hiroshi (2016) Mixing Temperature Measurement of Swirl Cold Flow Exiting Cold Exit of Vortex Tube. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-5., 38 (01006). ISSN 2261-236X

Mohd Hazwan, Yusof and Muhammad Fadhli, Suhaimi and Mohd Hilmi, Mohd Aris and Syed Mohammad, Akhtar (2016) Numerical Study on the Effect of Geometrical Parameters on the Performance of Vortex Tube Cooling Device Using Simflow. In: International Conference on Science, Engineering, Management and Social Sciences (ICSEMSS 2016) , 6-8 October 2016 , Universiti Teknologi Malaysia. pp. 1-8..

Mohd Hazwan Syafiq, Harun (2012) Analysis of refrigeration system working with nanolubricant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazwan Syafiq , Harun and M. F., Ghazali and A. R., Yusoff (2017) Analysis of Tri-axial Force and Vibration Sensors for Detection of Failure Criterion in Deep Twist Drilling Process. The International Journal of Advanced Manufacturing Technology, 89 (9-12). pp. 3535-3545. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohd Hazwan Syafiq , Harun and Zahari, Taha and Hadi, Abdul Salaam (2013) Sustainable Manufacturing: Effect of Material Selection and Design to the Environmental Impact in the Manufacturing Process. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 50 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Helmi, Abd Jalil (2010) The experimental study of effect of grinding process on thermal and surface roughness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Helmi, Suid and Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Yasmin, Abdul Wahab and Mohd Riduwan, Ghazali (2012) Simple Pole Placement Controller for Elastic Joint Manipulator. In: 19th International Conference on Mechatronics and Machine Vision in Practice (M2VIP12) , 28-30 November 2012 , Auckland, New Zealand. pp. 116-121..

Mohd Helmi, Rasid (2013) Acoustic emission analysis for bearing condition monitoring. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Herzwan, Hamzah and Abdul Adam, Abdullah and Mohd Aminuddin, Ayob (2012) An Experimental Study Of Di Diesel Engine Fuelled With Emulsion Fuel. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012 , Melaka, Malaysia. . (Unpublished)

Mohd Hilmi, Mohd Zin (2013) Computational study of fuel spray structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hilmy Naim, Mohd Yakin and Mohd Ruzaimi, Mat Rejab and Nur A., Hashim and Nik Abdullah, Nik Mohamed (2023) A new quasi-brittle damage model implemented under quasi-static condition using bond-based peridynamics theory for progressive failure. Theoretical and Applied Mechanics, 50 (1). 73 -102. ISSN 1450-5584. (Published)

Mohd Hilmy Naim, Mohd Yakin and Nik Abdullah, Nik Mohamed and Mohd Ruzaimi, Mat Rejab (2022) Effect of particle discretization and horizon size on the displacement and damage plot using bond-based peridynamics. In: Technological Advancement in Mechanical and Automotive Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore, 881 -897. ISBN 978-981-19-1456-0

Mohd Hilmy Naim, Mohd Yakin and Nik Mohamed, Nik Abdullah and Mohd Ruzaimi, Mat Rejab and Nur A., Hashim (2022) 1D peridynamics subjected to quasi-static load with adaptive dynamic relaxation. Journal of Engineering and Technology (JET). pp. 1-4. ISSN 2180-3811. (In Press / Online First) (In Press / Online First)

Mohd Hishammudin, Donnie (2010) Design and development of a micro-EDM using micro-actuator tool feed control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hizam, Mohd Noor (2010) Effect of aluminium oxide and silicon carbide abrasive type on mild steel surface temperature. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Idham, Rosman (2012) Investigation of surface modification on aluminum oxide using acid etching surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ikhwan Saifulizam, Roslan (2007) Computational fluid dynamics (CFD) simulations on gas turbine combustion chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Iqbal, Mohd Zolkepeli (2008) Failure analysis on the drillpipe due to the twist-off. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ishanuddin, N. and Sukadarin, Ezrin Hani and Mohd Nawi, N. S. and Widia, Mirta and Ab Rashid, A. A. and H. A., Aziz and Junaidah, Zakaria and Fauzan, N. S. and Osman, H. and Roslin, E. N. and Jawi, Z. M. and Yassierli, . (2021) Consumers' perception of automatic emergency braking (AEB): Theoretical model and construct development. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 206-222. ISSN 2550-2239. (Published)

Mohd Iskandar Putra, Azahar and Addie Irawan, Hashim and Raja Mohd Taufika, Raja Ismail (2021) Self-tuning hybrid fuzzy sliding surface control for pneumatic servo system positioning. Control Engineering Practice, 113. pp. 1-20. ISSN 09670661. (Published)

Mohd Izul Aslam, Mohd Khalit (2012) Investigation of wear behavior of cutting tool insert for ti-alloy machining using carbon coated with sic sandblasting and hf acid pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Dzolkafle (2009) Implementation if PID controller for controlling the liquid level of the coupled tank system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Dzolkafle (2008) Implementation of PID controller for controlling the liquid level of the coupled tank system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Kamarulzaman (2012) Design and development of cross flow delta-wing water turbine for Pahang river. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Jamil, A. W. and Faridah, A. A. and Nor Marzuina, F. K. N. and Zafirah, Z. F. (2019) Accuracy of conventional computations in assessing volume of small diameter logs of hopea odorata. Journal of Tropical Forest Science, 31 (1). pp. 125-133. ISSN 0128-1283. (Published)

Mohd Jamil M., Mokhtarudin and Wan Naimah, W. A. Naim and Abbas, Shabudin and Payne, Stephen J. (2022) Multiscale Modelling of Brain Tissue Oxygen and Glucose Dynamics in Tortuous Capillary during Ischaemia-Reperfusion. Applied Mathematical Modelling. ISSN 0307-904X. (In Press / Online First) (In Press / Online First)

Mohd Jamil Mohamed, Mokhtarudin and Abbas, Shabudin and Dokos, Socrates (2018) Computational model of left ventricle infarct remodelling during passive filling phase. In: IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2018) , 3 - 6 December 2018 , Borneo Convention Centre Kuching, Sarawak, Malaysia. pp. 1-10.. (Unpublished)

Mohd Jamil Mohamed, Mokhtarudin and Abbas, Shabudin and Payne, Stephen J. (2018) Brain tissue swelling during ischaemia-reperfusion: 2D finite element analysis using poroelasticity. In: 4th International Conference On Science, Engineering and Environment , 12 -14 November 2018 , Meitetsu New Grand Hotel, Nagoya. pp. 1-6.. (Unpublished)

Mohd Jamil Mohamed, Mokhtarudin and Aina Najwa, Nadzri and Stephen, Payne (2019) Finite element poroelastic modelling of brain oedema formation after ischaemic stroke reperfusion. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4..

Mohd Jamil Mohamed, Mokhtarudin and Mohamad Fairul, Hubakri and Mohd Amirul Syafiq, Zamri and Mohd Noor Akmal, Hamzah and Rabiatul Adawiyah, Roslan (2021) Design and development of test rig for PIV fluid flow experiment for biomedical engineering application. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Jamil Mohamed, Mokhtarudin and Payne, S. J. (2015) Mathematical Model of the Effect of Ischemia–reperfusion on Brain Capillary Collapse and Tissue Swelling. Mathematical Biosciences, 263. pp. 111-120. ISSN 0025-5564. (Published)

Mohd Jamil Mohamed, Mokhtarudin and Payne, Stephen J. (2017) The Study of the Function of AQP4 in Cerebral Ischaemia-Reperfusion Injury using Poroelastic Theory. International Journal for Numerical Methods In Biomedical Engineering, 33 (1). pp. 1-14. ISSN 2040-7939 (print); 2040-7947 (online). (Published)

Mohd Jamil Mohamed, Mokhtarudin and Shabudin, Abbas and Payne, Stephen J. (2019) Effects of Brain Tissue Mechanical and Fluid Transport Properties during Ischaemic Brain Oedema: A Poroelastic Finite Element Analysis. In: IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2018) , 3-6 December 2018 , Borneo Convention Centre Kuching, Sarawak, Malaysia. pp. 1-6.. ISBN 978-1-5386-2471-5

Mohd Johaneis, Abu Bakar (2007) Visualization robot sorter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Kamal, Kamarulzaman (2021) Engine combustion, performance, and emission characteristics of hermetia illucens larvae oil in a compression ignition engine. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Kamal, Kamaruzzaman and Abdul Adam, Abdullah (2020) Multi-objective optimization of diesel engine performances and exhaust emissions characteristics of Hermetia illucens larvae oil-diesel fuel blends using response surface methodology. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-2. ISSN 1556-7036 (Print); 1556-7230 (Online). (In Press / Online First) (In Press / Online First)

Mohd Kamal, Kamaruzzaman and Abdul Adam, Abdullah and R., Mamat (2019) Combustion, performances, and emissions characteristics of Hermetia illucens larvae oil in a direct injection compression ignition engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (12). pp. 1483-1496. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Mohd Kamal, Kamaruzzaman and Hafiz, M. and Abdullah, Adam and Ang, F. Chen and Awad, Omar I. (2019) Combustion, performances and emissions characteristics of black soldier fly larvae oil and diesel blends in compression ignition engine. Renewable Energy, 142. pp. 569-580. ISSN 0960-1481. (Published)

Mohd Kamal, Mohd Nawawi and N. M. Zuki, N. M. and Adam Shariff Adli, Aminuddin (2013) Planning and Design of a Knowledge Based System for Green Manufacturing Management. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Kuantan, Pahang, Malaysia. pp. 1-9., 50 (1). ISBN 1757-8981 (print); 1757-899X (online)

Mohd Khairi, Mohammad (2013) Analysis of a spur gear in automative system using finite element software. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Khairil Hafizi, Khairolazar (2013) Cutting performance of different coatings during minimum quantity lubricant milling of AA6061T6. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Anuar, Mohd Idris (2008) Effects of machining characteristics on electric discharge machine using different electrode materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Jeffridin, Daud (2008) Effective air extraction system and safe protection for welding bay in institution of higher learning. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Mizan, Nasir (2009) Investigate the effect of shear angle of high speed steel punching tool in punching process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Najmie, Mohd Nor (2009) Valve condition monitoring by using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Masror, M. A. Shakirin and Abd Razak, Nur Azhani and Ahmad, Asnul Hadi (2022) A short review on grain refinement techniques in semisolid metal processing. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 909 -918.. ISSN 2195-4356 ISBN 978-981191456-0

Mohd Mawardi, Saari and Mohd Herwan, Sulaiman and Nurul Akmal, Che Lah and Mohd Razali, Daud and Kiwa, Toshihiko (2023) Non-regularized reconstruction of magnetic moment distribution of magnetic nanoparticles using barnacles mating optimizer. In: Proceedings of 2023 International Conference on System Science and Engineering, ICSSE 2023 , 27-28 August 2023 , Virtual, Ho Chi Minh City. pp. 533-536. (192135). ISBN 979-835032294-1

Mohd Najmi, Mohamad (2013) Mahasiswa FKM ke Persidangan Pemimpin Belia Aceh-Malaysia. CREATE . p. 49. ISSN 1823-7487

Mohd Naqiuddin, Mohd Salleh (2013) Experimental and numerical analysis of heat distribution for different joining metal of tailor welded process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nasir, Akrimi Mathwa and Najib, M. S. and Mohd Daud, Suhaimi and Mohamad, Mujahid and Che Mohd, Che Mohd Aizal (2022) Intelligent classification of stingless bee honey using Enose. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 72-81. ISSN 2637-0883. (Published)

Mohd Nasuha, Ab Halim (2023) Investigation of nickel aluminium bronze (nab) metals cast and its properties. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Maarof).

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2020) Investigation on the Effect of Multiple Passes in Plain Waterjet Cleaning of Paint. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 537-543.. ISBN 978-981-15-0949-0

Mohd Nazmi, Mohd Nordin (2010) A study of tool wear prediction of cylindrical grinding wheel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nizam, Mohd Nor (2008) Development and prototyping an automatic fish feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Noor, Mustafa (2007) Modelling and fabrication of crankcase for single cylinder for 100 CC four-stroke engine. Faculty of Mechanical Engineering, University Malaysia Pahang .

Mohd Noor, Zamri (2008) Wall avoiding robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Noor Firdaus, Haron (2021) Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Noor Firdaus, Haron and F. R. M., Romlay (2019) Parametric study of laser engraving process of AISI 304 Stainless Steel by utilizing fiber laser system. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012124).

Mohd Nor Aidil, Mohd Azlan (2013) Cfd simulation of swirling in fluidized bed by using annular type distributor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nor Azlan, Zohari (2010) Experimental investigations of input shaping techniques for double pendulum type overhead crane (DPTOC) system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Nor Hisyam, Che Ab Aziz (2010) Fault detection for rotating machine using time frequency localization method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nordin, Zazalli (2008) Prediction studies for the performance of a single cylinder high speed SI linear engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Norfaez, Ismail (2013) Laser surface modification of gray cast iron using ND: YAG laser for enhanced surface properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Qayyum Akbar, Abdul Halim (2022) Development and characterisation of lanthanum-based bulk metallic glass (bmg) with localised ductilisation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nik Abdullah, Nik Mohamed).

Mohd Qayyuum, Mohd Ridzuan (2008) Design and fabricate of new pelton wheel blade. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rafi’uddin, Ramlan (2013) Hydrogen powered lawnmower. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Rahimi, Ramli and Norasiah, Abd Razak and Izwan, Ismail and Ahmad Shahir, Jamaludin and Ahmad Rosli, Abdul Manaf (2021) Effect of Dimple Size onto Wear Rate of Mild Steel AISI 1060 Surface. In: The 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021) , 23 November 2021 , Virtual Conference. pp. 1-4..

Mohd Rashidi, Maarof (2013) Microstructure and Mechanical Properties of Modified Ductile Ni-resist With Higher Manganese Content. Materials Science and Engineering : A, 574 (2. pp. 226-234. (Published)

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2013) Effect of Inoculation On Microstructure, Mechanical and Corrosion Properties of High Manganese Ductile Ni-resist Alloy. Materials and Design, 51 (Oktober). pp. 861-869. ISSN 0261-3069. (Published)

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2014) The Effects of Solidification on the Microstructure and Mechanical Properties of Modified Ductile Ni-Resist Iron with a High Manganese Content. Materials Science and Engineering: A, 597. pp. 395-407. ISSN 0921-5093. (Published)

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2012) A Study on Conversion of Higher Sulfur Pig Iron to Ductile Iron Using In-Mold Treatment Technique. International Review of Mechanical Engineering, 6 (4). pp. 896-900. ISSN 1970 - 8734. (Published)

Mohd Rashidi, Maarof (2015) Effect of magnesium addition on the microstructure and properties of ductile Ni-resist alloy using in-mould magnesium treatment method. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rashidi, Maarof (2022) Processing of Customized Automotive and Oil and Gas Components – Nickel Aluminium Bronze and Aluminium Silicon Material by Using Metal Casting Techniques. FTKMA Bulletin, 3 . p. 29. ISSN 2773-594X

Mohd Rashidi, Maarof and Kavin, J. and Mohammad, Azam and Hadi, Agung Efriyo and Zamree, Shayfull (2018) Effect of degassing addition on the solidification of nickel aluminum bronze. In: 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018 , 29-30 April 2018 , Eden Star Saigon Hotel, Ho Chi Minh; Viet Nam. pp. 1-5., 2030. ISSN 0094243X ISBN 978-073541752-6

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris and Shayfull Zamree, Abd Rahim and Asnul Hadi, Ahmad and Mohd Mustafa Al Bakri, Abdullah and Pietrusiewicz, Paweł and Nabiałek, Marcin G. and Garus, J. (2022) Microstructure and high temperature oxidation of modified ductile ni-resist alloy with higher manganese content. Acta Physica Polonica A, 142 (1). pp. 56-59. ISSN 0587-4246. (Published)

Mohd Rasidi, Ibrahim and Najah, Mahadi and Afiff, Latif and Zulafiff, Rahim and Zazuli, Mohid and Mohammad Sukri, Mustapa and S. A., Che Ghani (2017) Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061. In: 5th Asia Conference on Mechanical and Materials Engineering (ACMME 2017) , 9-11 June 2017 , Tokyo, Japan. pp. 56-60., 909. ISSN 0255-5476 ISBN 978-303571291-9

Mohd Razali, Hanipah and R., Mikalsen and A. P., Roskilly (2015) Recent Commercial Free-Piston Engine Developments for Automotive Applications. Applied Thermal Engineering, 75. pp. 493-503. ISSN 1359-4311. (Published)

Mohd Razali, Daud (2012) LRF assissted mapping and obstacle avoidance for hexapod robot Comet. PhD thesis, Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Razali, Hanipah (2015) Development of a spark ignition free-piston engine generator. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Razali, Hanipah and M. Haziq Adham, Rosli (2021) Performance characteristics of a small poppet valve crankshaft engine in free-piston engine mode. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 9149 -9157. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and M., Kettner (2019) The tuning of a small four-stroke spark ignition engine for flexible valve timings through numerical approach. In: Engineering Applications of Artificial Intelligence Conference 2018 , 3-5 December 2018 , Sutera Harbour Resort, Sabah, Malaysia. pp. 1-10., 255. ISSN 2261-236X

Mohd Razali, Hanipah and Shahin, Mansor and M. R. M., Akramin and A. R., Razali (2019) Design and parametric characterization of flexure bearing as automotive valve spring replacement. Journal of Mechanical Engineering and Sciences (JMES), 13 (1). pp. 4704-4717. ISSN 2231-8380 (online). (Published)

Mohd Razali, Hanipah and Zamri, Mohamed (2016) Numerical Investigations on the Port Flow Field of a Two-Stroke Poppet Valve Engine. In: 2nd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2016) , 2-3 August 2016 , MAI, Cyberjaya, Malaysia. pp. 1-11.. (Unpublished)

Mohd Redzuan, Hasan (2013) Experiment and analysis of intake pipe for single cylinder engine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Rezan, Hamji Ajirun and Syifak Izhar, Hisham and Mohd Nadzeri, Omar and Nasrul Hadi, Johari (2023) Covid-19 Embedded with Aerosol Particles Travel Simulation Inside a Mosque. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 365-373.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Mohd Rizal, Shafie (2010) One-dimensional simulation of a diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rizal Hilmie, Abd Rahman (2008) Analysis of disk cam motion for follower shape in vertical position. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rosyazwan Hanif, Ishak (2012) Design and fabrication of jig for butt welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rushdi, Mohamad and L. H., Shah and M., Ishak (2017) Investigation of Preheating Method on Joint Strength of Aluminium-Stainless Steel Dissimilar Welding Using Metal Inert Gas (MIG) Process. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-9., 238. ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Ruzaimi, Mat Rejab and Muhamad, Mat Noor and Rahman, Md Mustafizur and Kadirgama, Kumaran and Mohd Shahrir Mohd, Sani and Ahmad Nasser, Mohd Rose and Rosli, Abu Bakar and Ahmad Syahrizan, Sulaiman (2008) Implementation of outcome based education in the faculty of mechanical engineering, universiti malaysia pahang : An experience. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

Mohd Ruzaini, Zakaria (2009) Heat transfer phenomenon of heated cylinder at various locations in a square cavity. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sabarudin, Hj Sulong (2012) Prediction of grinding machining parameters of ductile cast iron using water based zinc oxide nanoparticle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Saberi, Mohamad and Sigeru, Omatu and Safaai, Deris and Yoshioka, Michifumi and Afnizanfaizal, Abdullah and Zuwairie, Ibrahim (2013) An enhancement of binary particle swarm optimization for gene selection in classifying cancer classes. Algorithms for Molecular Biology, 8 (15). pp. 1-11. ISSN 1748-7188. (Published)

Mohd Sabri, Mahmud and Sanuri, Ishak and Mohd Najib, Razali and Mohd Aizudin, Abdul Aziz and Musfafikri, Musa (2019) Grease quality issues on middle voltage switchgear: corrosivity resistivity safety and ageing. IIUM Engineering Journal, 20 (1). pp. 216-228. ISSN 1511-788X. (Published)

Mohd Sahril, Mohd Fouzi (2020) Identification of exhaust hanger location based on finite element model updating technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Sahril, Mohd Fouzi and Khaironi, Mohd Jelani and N. A., Nazri and M. S. M., Sani (2018) Finite element modelling and updating of welded thin-walled beam. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5874-5889. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Sahril, Mohd Fouzi and M. S. M., Sani and M. F. R., Ishak (2019) Identification dynamic behaviour of disc brake based on finite element model updating approach. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012006). ISSN 1742-6588 (print); 1742-6596 (online)

Mohd Saiful Nizam, Mohamad (2009) Cathodic protection of underground steel pipelines by using sacrificial anodes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Saifuldin, Mohd Mokhtar and A. R., Yusoff (2023) Effect of Machining Parameters on Surface Quality of Aluminium Puncher for Microchannel Fabrication Using Micro Cutting Process. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 11-20.. ISSN 2195-4356 ISBN 978-981-99-1244-5

Mohd Saupi, Mohd Sauki (2008) Optimization of milling parameters using ant colony optimization. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shafiq, Mat Ghazali and Fadhlur Rahman, Mohd Romlay (2017) Design and simulation of polymer-based 1x4 asymmetric waveguide coupler. In: 4th National Conference On Knowledge Transfer (NCKT''17) , 10-13 Disember 2017 , Sintok Kedah. pp. 1-3..

Mohd Shahizan, Shapii (2008) Implementation of LQR controller on coupled tank liquid level system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Shahril, Mohd Hassan (2012) Experimental and numerical study on sheet metal lateral bending with both ends fixed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahrizad, Ab Hamid (2009) Air-conditioning control system for energy saving application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Shahrizad, Ab Hamid (2009) Air-conditioning control system for energy saving application. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurulhazlina, Noordin).

Mohd Shahrul Azmi, Mohd Akhir (2008) Study of compresses natural gas (CNG) engine using intake valve swirl. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahrulnizam, Abu Seman (2007) Analysis on losses and boiler efficiency to find optimum cooling water flowrate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shaifudin, Azmi (2007) Design and fabrication of A4 manual paper shredder. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Shamil, Shaari (2010) Design optimization of connecting rod for internal combustion engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shamil, Shaari and Urai, Sylvia Dennis and Takahashi, Akiyuki and Mohd Akramin, Romlay (2022) Predicting fatigue crack growth behavior of coalesced cracks using the global-local superimposed technique. Frattura ed Integrita Strutturale, 16 (62). pp. 150-167. ISSN 1971-8993. (Published)

Mohd Sharizan, Md Sarip (2008) Model predictive control of vaporizer in vinyl acetate monomer process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Shukri, Mai (2007) Design and fabrication of crankcase for single cylinder 2-strokes engine. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Sobri, Husain (2008) Analysis of disk cam motion for follower shape in horizontal position. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syafiq, Yusoff and Zamzuri, Hamedon (2016) Prevention of Springback of High Strength Steel Sheet in L-Bending Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 398-403..

Mohd Syah Waliyullah Ad-Dahlawi, Mat Razali (2012) Optimization of abrasive machining of ductile cast iron using water based ZnO nanoparticles : a support vector machine approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syahmi, Sharif (2009) PID dual speed motor controller for mobile robot application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Syahray Izham, Muhazihat and Nurrina, Rosli and Radhiyah, Abd Aziz and Abdul Aziz, Jaafar (2018) Potential of direct evaporative cooling system under metal plate attachment to wetted pad application. Journal of Modern Manufacturing Systems and Technology, 1. pp. 69-75. ISSN 2636-9575. (Published)

Mohd Syakir, Abdul Rahman (2010) Effect of aluminum oxide and silicon carbide abrasive type on stainless steel ground surface integrity. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazwan, Mohd Zin and M. N., Abdul Rani and Mohd Azmi, Yunus and M. S. M., Sani and W. I. I., Wan Iskandar Mirza and Ahmad Azlan, Mat Isa (2018) Frequency response function (FRF) based updating of a laser spot welded structure. In: International Conference on Electrical, Electronics, Materials and Applied Science 2017 , 22-23 December 2017 , Swami Vivekananda Institute of Technology (SVIT)Secunderabad, Telangana; India. , 1952. ISSN 0094-243X ISBN 978-073541647-5

Mohd Syazwi Helmi, Jashari (2013) Automatic inverted pendulum control system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Syimir Haziq, Noor Zainal (2009) Characterization of laser beam intensity used for machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufidd, Tawang (2010) Numerical simulation of nanofluid forced convection heat transfer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Awang @ Mohammed (2010) Development of regression equation for heat capacity and density of nanofluids properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Abd Kadir (2008) Intake port flow study on various cylinder head using flowbench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Waqiuddin, Nordin (2009) Experimental study of heat transfer natural convection in horizontal internally finned tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yazid, Abu (2016) Integration of mahalanobis-taguchi system and activity based costing in decision making for remanufacturing. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Yazid, Abu (2009) Prediction of cutting power in end-milling operation of modified AISI P20 steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yazid, Abu and K. R., Jamaludin and Muhammad Aizzat, Zakaria (2017) Characterisation of Activity Based Costing on Remanufacturing Crankshaft. International Journal of Automotive and Mechanical Engineering (IJAME). ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Yuhyi, Mohd Tadza and Tengku Hafidatul Husna, Tengku Anuar and Fadzil, Mat Yahaya and Rahisham, Abd Rahman (2021) Performance of graphite and activated carbon as electrical grounding enhancement material. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang, Gambang Campus, Kuantan, Pahang, Malaysia. pp. 1139-1154., 666. ISBN 978-981-15-5281-6

Mohd Yusof, Taib (2010) Acoustic Emission Study Of Fatigue Crack Growth In Rail Track Material. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Yusof, Taib (2010) Analysis Of Functional Build (FB) In Aluminium Extrusion Process Innovation By Using Arena Software. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusof, Taib (2010) Design And Development Of A Single Vane Rotating Sleeve Rotary Compressor For Refrigeration System. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusof, Taib and Azizuddin, Abd Aziz (2010) Performance Analysis Of A Domestic Refrigerator. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusof, Taib and Shahrani, Anuar and Hassan, Ibrahim (2013) Numerical Investigation of Ground Cooling Potential for Malaysian Climate. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Mohd Yusof, Taib and Azim, Arshad and Suziyana, Mat Dahan and F., Basrawi (2015) Experimental Study of a Domestic Refrigerator with POE-AI2O3 Nanolubricant. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2243-2252. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Yusof, Taib and F., Basrawi and Shahrani, Anuar and Hassan, Ibrahim (2018) The Effect of Flowrate and Effectiveness on Theoretical Design and Thermal Characteristic of a GHE. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-8., 225 (01023). ISSN 2261-236X

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) Thermal analysis of earth-to-air heat exchanger using laboratory simulator. Applied Thermal Engineering, 134. pp. 130-140. ISSN 1359-4311. (Published)

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) The thermal characteristics and performance of a ground heat exchanger for tropical climates. Renewable Energy, 121. pp. 528-538. ISSN 0960-1481 . (Published)

Mohd Yusof, Taib and S. F., Ismail and M., Ishak (2011) Sustainable Analysis of Lightweight Lift System Design for Disable People Using Finite Element. In: International Conference on Robotics Automation System (ICORAS 2011) , 23-24 May 2011 , ITC, Kemaman Terengganu. . (Unpublished)

Mohd Yusof, Taib and Shahrani, Anuar and Hassan, Ibrahim (2014) Study of Effect of Thermal Diffusivity on Ground Temperature for Malaysian Climate. Applied Mechanics and Materials, 554. pp. 301-306. ISSN 1662-7482. (Published)

Mohd Yusoof, M. Y. and Nik Mohamed, N. M. Z. and Nelfiyanti, . and Md Yasir, A. S. H. (2023) The assessment of man and method toward the assembly line improvement in automotive manufacturing. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 7-14. ISSN 2636-9575. (Published)

Mohd Yusri, Saidin and Tsuchiya, Kazuyoshi and Inoue, Takehiko and Kajiwara, Kagemasa and Kimura, Minoru (2014) Qualitative Measurement of Pain by Analysing the Salivary Alpha Amylase. Precision Engineering, 38 (2). 257-260 . ISSN 0141-6359. (Published)

Mohd Yusrizal, Mohd Ali (2008) Carbon dioxide (CO2) laser cut quality using different feed rate and constant power level. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zafrullah, Zulkifli (2012) Fuzzy PID controller applied on milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaidi, Mohd Tumari and Latifah, Shabudin and Mohd Anwar, Zawawi and L. H., Shah (2013) Active Sway Control of a Gantry Crane Using Hybrid Input Shaping and PID Control Schemes. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-11. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohd Zaidi, Mohd Tumari and Mohd Ashraf, Ahmad and Ahmad Nor Kasruddin, Nasir (2013) Composite Fuzzy Logic Control Approach to a Flexible Joint Manipulator. International Journal of Advanced Robotic Systems, 10. ISSN 1729-8806 . (Published)

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Mohd Anwar, Zawawi and L. H., Shah (2012) H-Infinity Controller Based on LMI Region for Flexible Robot Manipulator. Research Journal of Applied Sciences, 7 (5). pp. 275-281. ISSN 1815-932X. (Published)

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Yasmin, Abdul Wahab (2013) H-Infinity controller with graphical LMI region profile for Gantry Crane System. In: The Eighteenth International Symposium on Artificial Life and Robotics 2013 (AROB 18th ™'13) , 30 Jan - 01 Feb 2013 , Daejeon Convention Center, Daejeon, Korea. pp. 346-351..

Mohd Zaidi, Sidek and Nur Adjla, Mohamad Hafizin and Ahmad Nasser, Mohd Rose and Khairul Azha, Abd Jalal (2013) Experimental Analysis on Martensite Formation of Low Carbon Steel During Rapid Cooling Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Mohd Zaidi, Mohd Tumari and Muhammad Salihin, Saealal and Mohd Riduwan, Ghazali and Yasmin, Abdul Wahab (2012) H∞ Controller with Graphical LMI Region Profile for Gantry Crane System. In: Soft Computing and Intelligent Systems (SCIS) and 13th International Symposium on Advanced Intelligent Systems (ISIS 2012) , 20-24 November 2012 , Kobe, Japan. pp. 1397-1402.. ISBN 978-1-4673-2742-8 (Print); 978-1-4673-2743-5 (Online)

Mohd Zaidi, Sidek and Anas Basri, Musthafa and Jasri, Mohamad and Muhamad Rozikin, Kamaluddin (2013) Finite Element Analysis on Dissimilar Thickness Joining of The Tailor-Welded Blank Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Mohd Zaidi, Sidek and Mohd Syahidan, Kamarudin and Mohamad Nafis, Jamaluddin (2015) Simulation and Fabrication of Open-Type Boiler of Fish Cracker Production Line. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Mohd Zaidi, Sidek and Muhammad Afiq Miqhail, Johari (2022) Study on effectiveness of air-horn device for bird deterrent in paddy cultivation area. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). 90 -94. ISSN 2636-9575. (Published)

Mohd Zaim, Din (2008) Experimental study on strength of spot welded. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaimatulakmar, Abdullah (2007) Mathematically analysis on two stroke uniflow scavenging system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zairulnizam, Mohd Zawawi and Nik Mohd Hafiz Aiman, Nik Haron (2014) Effect of Process Parameters in Hot Press Forming Operation to Tensile Strength of Ultra High Strength Steel. Advanced Materials Research, 974. pp. 179-182. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Zairulnizam, Mohd Zawawi and Mohd Ali Hanafiah, Shaharudin and Ahmad Rosli, Abdul Manaf (2014) Influences of Varying Combination of Feed Rate and Depth of Cut to Tool Wear Rate and Surface Roughness: High Speed Machining Technique in Non-High Speed Milling Machine. Advanced Materials Research, 903. pp. 194-199. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hafiz, Muhammad Ali (2023) Viscosity and friction reduction of double end capped polyalkylene glycol nanolubricants for eco friendly refrigerant. Lubricants, 11 (129). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hendrawati, Tri Yuni (2023) Stability and thermal conductivity of mono and hybrid nanoparticles dispersion in double-end capped pag lubricant. Lubricants, 11 (1). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Zamri, Nur Shahida Azzahra and Amiril, S. A.S. (2022) Stress analysis and optimization of quick stop device through finite element analysis using ANSYS. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 82-90. ISSN 2637-0883. (Published)

Mohd Zulhilmi, Md Yusof (2010) Failure of drive shaft using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulhilmi, Rifin (2010) Effect of lubrication condition on surface roughness in turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd. Hafiz, Baharuddin (2012) Development of a stingray robot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd. Herzwan, Hamzah and Abdul Adam, Abdullah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2013) Performance of Diesel Engine Operating with Waste Plastic Disposal Fuel. Applied Mechanics and Materials, 465-46. pp. 423-427. ISSN 1662-7482. (Published)

Mohd. Herzwan, Hamzah (2015) An experimental study on performance of diesel engine operating with waste tire and waste plastic derived fuel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Mohd. Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2019) Performance analysis of diesel engine running with tyre-derived fuel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012107). ISSN 1757-8981 (Print), 1757-899X (Online)

Mon, Thet Thet and Khairul Fikri, Muhammad and Asnul Hadi, Ahmad and Zazuli, Mohid (2011) Experimental micromachining of silicon with Nd-YAG laser. In: International Conference on Experimental Mechanics (ICEM 2010) , 29 November - 1 December 2010 , Kuala Lumpur. pp. 244-248., 83. ISSN 16609336 ISBN 978-303785221-7

Mon, Thet Thet and Z., Ghazalli and Asnul Hadi, Ahmad and Mohd Fazli, Ismail and Khairul Fikri, Muhammad (2010) Design of Electrostatic Comb Actuators based on Finite Element Method. In: International Conference on Enabling Science and Nanotechnology (ESciNano 2010) , 1-3 December 2010 , Kuala Lumpur. pp. 1-3..

Moorthy, M. (2010) Performance Of Solar Air-Conditioning System Using Heat Pipe Evacuated Tube Collector. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Moyo, Tirivavi and Omer, Mazen Mohamed Alkhdar and Chigara, Benviolent (2024) Overlapping sustainable construction indicators for construction organisations in Zimbabwe. Journal of Engineering, Design and Technology. pp. 1-23. ISSN 1726-0531. (Published)

Mubarik, Abdirisak and Sarah ‘Atifah, Saruchi and Mahmud Iwan, Solihin and Teh, Boon Hong and Ng, Weng Kent (2023) A mini review on nanorobots in medical field: Applications and challenges. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 13-17. ISSN 2637-0883. (Published)

Muhamad, Mat Noor (2022) Renewable Energy, A Tube Solar Collector using Nanofluids. FTKMA Bulletin, 3 . p. 30. ISSN 2773-594X

Muhamad, Mat Noor and Kadirgama, Kumaran and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Md Mustafizur, Rahman and Ahmad Syahrizan, Sulaiman (2008) Quality management system in implementation of outcome based education at faculty of mechanical engineering, universiti malaysia pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

Muhamad Afiq, Izuan and Nor Imrah, Yusoff (2022) Simulation of heat generation in friction surface cladding (FSC) of multilayer AA2024. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 63-68. ISSN 2636-9575. (Published)

Muhamad Akhbar Osman, Md. Hashim (2009) Simulation of gaseous fuel injector geometries of mult holes nozzle by using CNG engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Asyraf, Shahrom and Mohamad Heerwan, Peeie and Mohamad Izhar, Ishak and Muhammad Zulhilmi, Ismail and Muhammad Solehuddin, Ibrahim (2019) Comparison of braking performance between mechanical and dynamic braking for Electric Powered Wheelchair. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012104). ISSN 1757-8991 (Print), 1757-899X (Online)

Muhamad Azman, Mohd Yamin (2012) Multi dimensional modelling of a high pressure natural gas fuel injection process in prechamber of a single cylinder four-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Edham, Saharudin (2012) Conceptual design of glass recycling machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Faisal Ezuarie , Draman (2010) Fuzzy active vibration control for lathe machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Faruqi, Zahari and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohamad and Nur Farina, Hamidon Majid (2021) Performance measure of case based reasoning (CBR) for ammonia in water by specific concentration. In: The 6th International Conference on Electrical, Control and Computer Engineering (InECCE2021) , 23 August 2021 , Microsoft Team Platforms. pp. 1-13.. (In Press / Online First)

Muhamad Firdaus, Zaini (2013) Automatic solar power for feeding system for aquaphonic farming. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hadie Aizzat, Asli (2020) Heat transfer performance of single and hybrid water-based nanofluids (Al2O3 and SiO2) in nucleate pool boiling. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Hadie Aizzat, Asli and Muhamad Zuhairi, Sulaiman and Enoki, Koji and Okawa, Tomio Heat transfer coefficient of nucleate boiling in low concentration level of single and hybrid Al2O3-SiO2 waterbased nanofluids. IOP Conference Series: Materials Science and Engineering, 469 (012109). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Muhamad Hafizuddin, Ismail (2012) Design and development of android application of gear design ebook and calculator. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Haniffah, Ghafar (2010) Surface integrity of mild steel in die-sinking electrical discharge machine (EDM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Husnain, Mohd Noh (2020) Fatigue crack growth analysis using the bootstrap s-version finite element model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Izdhar, Zaki and Saptaji, Kushendarsyah and Ramdan, R. D. and Kurniawan, Tedi (2019) Fabrication of micro dimples pattern using ball end mill. In: IOP Conference Series: Materials Science and Engineering, International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) , 6-7 September 2018 , Bandung, Indonesia. pp. 1-8., 547 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhamad Nazumi, Basuki (2009) Prediction of cutting force in end-milling operation of modified AISI P20 tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Norkhizan, Abdullah and Ahmad Fitri, Yusop and Rizalman, Mamat and Mohd Adnin, Hamidi and Sudhakar, Kumarasamy and Yusaf, Talal (2023) Sustainable biofuels from first three alcohol families : A critical review. Energies, 16 (648). pp. 1-21. ISSN 1996-1073. (Published)

Muhamad Nurzami, Ab Sota (2012) Water injection system design for six stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Rozikin, Kamaluddin and M. F. F., Ab Rashid (2021) Modelling and Optimization of Asymmetric Vehicle Routing Problem Using Particle Swarm Optimization Algorithm. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 49-58.. ISBN 978-981-15-9505-9

Muhamad Rusydi, Ali (2007) Design and fabrication of adjustable ceiling fan blade cleaner. Faculty of Mechanical Engineering, University Malaysia Pahang.

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Nor Shaufina, Md Jaafar (2023) Spiral wrap using CFRP strip to strengthen TSPC column under compression. In: Proceedings 2nd International TVET & Entrepreneurship Conference 2023. 2nd International TVET & Entrepreneurship Conference 2023 (ITEC 2023) , 11-12 October 2023 , Politeknik Negeri Medan & Politeknik Kota Bharu. pp. 247-256.. ISBN 978-967-2702-70-2

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit (2023) Effect of hybrid FRP confinement on tin slag polymer concrete compressive strength. International Journal of Engineering and Advanced Technology (IJEAT), 12 (5). pp. 119-126. ISSN 2249-8958 (Online). (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and Nurhadiyanto, Didik (2023) Experimental study on tin slag polymer concrete strengthening under compression with metallic material confinement. Polymers, 15 (817). pp. 1-19. ISSN 2073-4360. (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and S. S., Amirnuddin (2023) Splitting tensile strength study of tin slag polymer concrete. Materials Today : Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and Selvi Binoj, Joseph and Brailson Mansingh, Bright and Siti Safarah, Amirnuddin and Ali, Alamry and Lim Goh, Kheng and Nurhadiyanto, Didik (2022) Tin slag polymer concrete strengthening by basalt and aramid fiber reinforced polymer confinement. Journal of Polymer Materials, 39 (3-4). pp. 241-253. ISSN 0976-3449, 0973-8622. (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) A review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure : Materials and Applications. Springer Nature, pp. 43-58. ISBN 978-981166383-3, 978-981166382-6

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Siti Safarah, Amirnuddin (2023) Finite Element Modeling of Tin Slag Polymer Concrete Column with FRP Material Confinement under Compression. In: Reinforced and Porous Materials for Structural Applications. Penerbit UTM, Universiti Teknologi Malaysia, pp. 127-152. ISBN 978-983-52-1933-7

Muhamad Zuhairi, Sulaiman (2008) Simulations Of Two Bubbles Rise In Cavity With Lattice Boltzmann Method. In: International Graduate on Engineering and Science (IGCES'08) Mechanical Engineering , 23-24 December , Universiti Teknologi Malaysia, Skudai - Johor. .

Muhamad Zuhairi, Sulaiman and M. Rosdzimin, A. R. and N. Azwadi , C. S. (2010) Simulation Ofmixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2 (Jul. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Muhamad Zuhairi, Sulaiman (2008) Laminar Flow Through A Double Elbow Geometry With Lattice Boltzmann Numerical Method. In: International Graduate on Engineering and Science (IGCES'08) Mechanical Engineering , 23-24 December 2008 , Universiti Teknologi Malaysia, Skudai - Johor. . (Unpublished)

Muhamad Zuhairi, Sulaiman and Matsuo, Daisuke and Enoki, Koji and Okawa, Tomio (2016) Systematic Measurements of Heat Transfer Characteristics in Saturated Pool Boiling of Water-Based Nanofluids. International Journal of Heat and Mass Transfer, 102. pp. 264-276. ISSN 0017-9310. (Published)

Muhamad Zulhilmi, Ismail (2021) Study on effect of abs control system to the vehicle dynamic behavior during braking on various speed and road condition. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Heerwan, Peeie).

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna (2019) Fatigue and harmonic analysis of a diesel engine Crankshaft using ANSYS. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 371-376.. ISBN 978-981-15-0950-6

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna (2020) A bibliometric analysis on path planning methods for mobile robots published in scientific citation index-expanded indexed journals between 2000-2020. In: First International Conference on Electrical Energy and Power Engineering 2020 (ICEEPE 2020) , 20-28 Oktober, 2020 , The Light Hotel, Penang, Malaysia. pp. 1-7..

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna and Abdullah, Nor Rul Hasma (2021) Analysis of a 440C steel roller bearing using finite element method. In: Materials Today: Proceedings; 11th International Conference on Materials Processing and Characterization , 15 - 17 December 2020 , Indore, India. pp. 1750-1754., 44. ISSN 2214-7853

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna and Abdullah, Nor Rul Hasma (2021) A systematic and bibliometric analysis on 3D printing published in scientific citation index-expanded indexed journals between 1999 and 2019. In: Materials Today: Proceedings; 11th International Conference on Materials Processing and Characterization , 15 - 17 December 2020 , Indore, India. pp. 1739-1743., 44 (168673). ISSN 2214-7853

Muhammad, Aisha and Ali, Mohammed A. H. and Turaev, Sherzod and Shanono, Ibrahim Haruna and Hujainah, Fadhl and Mohd Nashrul, Mohd Zubir and Muhammad Khairi, Faiz and Erma Rahayu, Mohd Faizal and Abdulghafor, Rawad (2022) Novel algorithm for mobile robot path planning in constrained environment. Computers, Materials and Continua, 71 (2). pp. 2697-2719. ISSN 1546-2218. (Published)

Muhammad, Aisha and Ali, Mohammed Abdo Hashem and Shanono, Ibrahim Haruna (2020) Design optimization of a diesel connecting rod. Materials Today: Proceedings, 22 (4). pp. 1600-1609. ISSN 2214-7853. (Published)

Muhammad, Aisha and Shanono, Ibrahim Haruna (2019) Simulation of a Car crash using ANSYS. In: 2019 15th International Conference on Electronics, Computer and Computation, ICECCO 2019; 15th International Conference on Electronics, Computer and Computation, ICECCO 2019 , 10-12 December 2019 , Abuja. pp. 1-5. (9043275). ISSN 978-172815160-1

Muhammad, Mazlan (2008) Path follower mobile robot using PID controller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Muhammad, Nor Shakiman (2010) Simulation on airflow inside the nasal cavity with and without uncinate process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad, Saqib and Abdul Rahman, Mohd Kasim and Nurul Farahain, Mohammad and Chuan Ching, D. L. and Sharidan, Shafie (2020) Application of fractional derivative without singular and local kernel to enhanced heat transfer in CNTs nanofluid over an inclined plate. Symmetry, 12 (5). pp. 1-22. ISSN 2073-8994. (Published)

Muhammad, Siti Sabariah and Bakar, R. A. (2020) Spark ignition engine performance analysis of liquefied petroleum gas. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-9., 788 (012065). ISSN 1757-8981

Muhammad , Aziz and Kurniawan, Tedi and Takuya , Oda and Takao , Kashiwagi (2017) Advanced Power Generation using Biomass Wastes from Palm Oil Mills. Applied Thermal Engineering, 114. pp. 1378-1386. ISSN 1359-4311. (Published)

Muhammad Adib, Shaharun and Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Khairul Azha, Abd Jalal (2012) Performance of process damping in machining titanium alloys at low cutting speed with different helix tools. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X

Muhammad Adlin, Hasmar (2013) Analysis and design of an open channel flow flume : reservoir section. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Afiq, Zali (2009) Lubrication oil system design for a new 4-strokes single-cylinder engine cylinder head. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Muhammad Aiman, Abdul Moin (2009) Simulation of Rayleigh Bernard convection using lattice Boltzmann method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Aizzat, Zakaria and Jabbar, Waheb A. and Noorazliza, Sulaiman (2023) Development of a smart sensing unit for LoRaWAN-based IoT flood monitoring and warning system in catchment areas. Internet of Things and Cyber-Physical Systems, 3. pp. 249-261. ISSN 2667-3452. (Published)

Muhammad Aizzuddin, Abdullah (2019) Development of temperature-insensitive fibre Bragg grating based pressure transducer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Aizzuddin, Abdullah and Mohd Yusof, Taib and Wan Azmi, Wan Hamzah (2022) Performance study of ground heat exchanger based on thermal conductivity of hybrid soil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99 (2). 94 -107. ISSN 2289-7879. (Published)

Muhammad Ajmal, Mohd Taqayuddin and Mohd Afzan, Mohd Anuar and Solehuddin, Shuib and Zulkifli, Mohamed and Anwar, P. P. Abdul Majeed (2018) Mechanics of total ankle replacement during flexion in relation to geometrical design: a finite element study. International Journal of Engineering & Technology, 7 (4). pp. 70-72. ISSN 2227-524X. (Published)

Muhammad Ali, Mohamed (2010) Fabrication of fuel saving device helical spring based on gasoline fuel car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Aliff Nazreen, Norazmi (2012) Multiple objective optimization of electrical discharge machining on titanium alloy using grey relational analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Alliff, Rahim (2010) One-dimensional simulation of two stroke hydrogen direct injection linear generator free-piston engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Altaf, A Jalil (2007) Design and development of digital PID controller to control speed of permanent magnet DC motor for pcb drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Amin, Harun and Zafri Azran, Abdul Majid and Zairul Azrul, Zakaria and Ahmad Faris, Ismail and Sany Izan, Ihsan and Kamaruzzaman, Sopian and Ahmad Fadzil, Sharol and Amir, Abdul Razak (2021) Study on selection of a suitable material and the parameters for designing a portable flat plate base-thermal cell absorber (FPBTCA). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 71-92. ISSN 2289-7879. (Published)

Muhammad Aminuddin, Pi Remli and M. F., Ghazali and Azmi, W. H. and Hanafi, M. Yusop (2021) Transient-based leak detection and monitoring of water pipes using complementary ensemble empirical mode decomposition (CEEMD) method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 135-148. ISSN 2289-7879. (Published)

Muhammad Amir Aikal, Azmin and Mohd Azrul Hisham, Mohd Adib (2023) Consistency data of peak expiration flow, SpO2 level and heart rate measurement using spirometer volume (SpiroLuME) device. TWIST (International Multidisciplinary Journal), 18 (4). pp. 317-322. ISSN 1759-0418. (Published)

Muhammad Amir Syahiran, Muhammad Tarminzi and Amir, Abdul Razak and Muhammad Amirul Azwan, Azmi and Ahmad, Fazlizan and Zafri Azran, Abdul Majid and Kamaruzzaman, Sopian (2021) Comparative study on thermal performance of cross-matrix absorber solar collector with series and parallel configurations. Case Studies in Thermal Engineering, 25. pp. 1-17. ISSN 2214-157X. (Published)

Muhammad Amirul, Abdullah (2022) Classification of skateboarding tricks by synthesizing transfer learning models and machine learning classifiers using different input signal transformations. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Majeed, Anwar P.P).

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Muhammad Aizzat, Zakaria (2020) The classification of skateboarding trick manoeuvres through the integration of IMU and machine learning. In: Embracing Industry 4.0. Lecture Notes in Electrical Engineering, 678 . Springer Singapore, Singapore, pp. 125-132. ISBN 978-981-15-6024-8 (Printed) 978-981-15-6025-5(Online)

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Noor Azuan, Abu Osman and Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed (2023) An evaluation of different input transformation for the classification of skateboarding tricks by means of transfer learning. In: Lecture Notes in Bioengineering; International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 - 15 November 2022 , Kuala Lumpur. 269 -275.. ISSN 2195-271X ISBN 978-981990296-5

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar P. P., Abdul Majeed (2021) The Effect of Image Input Transformation from Inertial Measurement Unit Data on the Classification of Skateboarding Tricks. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 424-432.. ISBN 978-981-16-4803-8

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Noor Azuan, Abu Osman and Anwar P.P., Abdul Majeed (2021) The classification of skateboarding tricks via transfer learning pipelines. PeerJ Computer Science. pp. 1-18. ISSN 2376-5992. (Published)

Muhammad Amirul Azwan, Azmi and Amir, Abdul Razak and Muhammad Amir Syahiran, Muhammad Tarminzi and Ahmad Fadzil, Sharol and Ahmmad Shukrie, Md Yudin and Zafri Azran, Abdul Majid (2023) Hydrodynamics investigations of kaffir lime leaves drying in a swirling solar drying chamber with inclined slotted angle air distributor. CFD Letters, 15 (2). pp. 1-16. ISSN 2180-1363. (Published)

Muhammad Ar Rahim, Ibrahim and Muhammad Amirul, Abdullah and Muhammad Nur Aiman, Shapiee and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Muhammad Aizzat, Zakaria and Noor Azuan, Abu Osman and Anwar P. P., Abdul Majeed The classification of skateboarding trick manoeuvres: A K-nearest neighbour approach. Lecture Notes in Bioengineering. (Published)

Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Anwar P. P., Abdul Majeed (2021) The classification of skateboarding tricks: A support vector machine hyperparameter evaluation optimisation. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer Singapore, Singapore, pp. 1013-1022. ISBN 978-981-33-4596-6 (Printed) 978-981-33-4597-3 (Online)

Muhammad Arieffuddin, Mohd Jamil and Fadhlur Rahman, Mohd Romlay and Khairul Fikri, Muhammad and Shamsudin, Abdul Samat and Ismayuzri, Ishak (2021) Pressure based control for a variable speed diesel engine driven pump controller. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 65-69. ISSN 2637-0883. (Published)

Muhammad Arif, Abdullah (2019) Optimisation of energy efficient Assembly Sequence Planning using Moth-Flame Optimisation alghorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Arif, Abdullah and Ahmad Nasser, Mohd Rose and Zakri, Ghazalli and Ahmad Nasser, Mohd Rose (2019) A case study of energy efficient assembly sequence planning problem. 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 469 (012013). (Published)

Muhammad Arifin, Ramli (2014) Damage to temporary canopy structure by wind load. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Arifuddin, Fitriady and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2022) Numerical simulation on the elucidation of wake flow structure behind a single Quarter Elliptic-Wedge Spire. In: Engineering Technology International Conference 2022 (ETIC 2022) , 7 - 8 September 2022 , Universiti Malaysia Pahang, Pahang. pp. 1-9.. ISBN 978-1-83953-782-0

Muhammad Arifuddin, Fitriady and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2023) Urban Heat Island Phenomenon in Tropical Countries: Analysis of the Wake Flow Behind Slender High-Rise Building. In: Lecture Notes in Energy. Lecture Notes in Energy, 92 . Springer Link, Springer Nature Singapore, pp. 522-538. ISBN 2195-1284 (Printed); 2195-1292 (Online)

Muhammad Ashraf, Ali Zubir (2010) Visualization and analysis of the gasohol blends fuel spray pattern. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2021) Effect of Different Nickel Percentage in Solder Alloy towards Intermetallic Compound Formation and Growth. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-9., 1092 (012012). ISSN 1757-899X

Muhammad Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2023) Effect of Sn-xCu Solder Alloy onto Intermetallic Formation After Laser Soldering. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang. pp. 869-880.. ISBN 978-981-19-1457-7

Muhammad Asyraf, Shahrom (2020) Investigation on electric motor braking control system for electric powered wheelchair. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Heerwan, Peeie).

Muhammad Asyraf, Shahrom and Mohamad Heerwan, Peeie (2017) Development of Zero Turning Radius by Using Different Independent Torque. In: IEEE The 3rd International Conference On Control, Automation and Robotics (ICCAR 2017) , 21-25 April 2017 , Nagoya Institute of Technology, Japan. pp. 647-650.. ISBN 978-1-5090-6088-7

Muhammad Azim, Azizi and Ahmad Kamal Ariffin, Mohd Ihsan and Nik Abdullah, Nik Mohamed (2015) The Peridynamic Model of Viscoelastic Creep and Recovery. Multidiscipline Modeling in Materials and Structures, 11 (4). pp. 579-597. ISSN 1573-6105. (Published)

Muhammad Azim Anwar, Noor Hisham (2021) Synthesis and characterisation of graphene and its corrosion resistance on magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Azri, Muhammed Nor and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and N. A., Abdul Hamid and W. M., Wan Mohamed (2022) Reliability, availability, maintainability and safety (rams) in railway’s assurance system and implementation challenges : A Review. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 148..

Muhammad Azwan, Zainol Abidin (2012) Experimental validation for chatter stability prediction. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Badrul, Ishak Mustafa (2013) Design and fabricated pump trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Bisharul Hafi, Ab Jalil (2010) Determination of heat transfer coefficient using experimental values of pressure drop of a single phase fluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Emir Husaini, Mohamad Nor and Mohd Faizal, Ab Razak and Ahmad Firdaus, Zainal Abidin (2021) Smart e-laundry monitoring system by using IoT. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Muhammad Ezra-Ezwan, Mat Aris (2008) Speed control of DC motor using PID controller implementation with PLC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2019) The effect of tube length and cold exit diameter on the cold flow temperature of vortex tube using high temperature working gas. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical EngineeringInternational Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012040). ISSN 1757-899X

Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2018) The effect of tube length, cold exit diameter and high temperature of working gas on the cold flow temperature of vortex tube. In: International Postgraduate Conference On Mechanical Engineering , 31 Oktober 2018 , Universiti Malaysia Pahang. pp. 1-9.. (Unpublished)

Muhammad Faez, Mohamad Tajudin (2021) The effect of processing parameters on microstructure and mechanical properties of aluminium 6061 semisolid metal billet. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Faez, Mohamad Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2023) Grain refinement in semi‐solid metal processing: current status and recent development. The International Journal of Advanced Manufacturing Technology, 124. pp. 1379-1399. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Faez Mohamad, Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2023) Grain refinement in semi-solid metal processing: Current status and recent development. International Journal of Advanced Manufacturing Technology, 124 (5-6). pp. 1379-1399. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Faez Mohamad, Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2022) Microstructure characteristic of aluminium 6061 semi-solid feedstock billet produced with direct thermal method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 76..

Muhammad Fahmi , Jasri (2012) Investigation of machining performance of the coated carbide cutting tools with acid etching surface pretreatment. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Fahmi Izuwan, . and Ahmad Redza, Ahmad Mokhtar and Mohd Nizar, Mhd Razali (2020) Study on operational characteristic of microwave oven driven plasma spray device. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 558-563.. ISBN 978-981-15-0950-6

Muhammad Faisal, Hashim and Norazlianie, Sazali and Zawati, Harun and Norsuhailizah, Sazali and Wan Norharyati, Wan Salleh and Triyanda, Gunawan (2023) Analysis study of the carbon monoxide sensor for vehicle safety system application. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Muhammad Farid, Kamberi (2009) Design and analysis of cloth dryer cabinet by utilizing heat rejected from air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fathallah, Aguk Zuhdi and Bimatara, Ian and Rosli, Abu Bakar (2021) Prediction performance of two stroke semi free piston diesel engine with dual piston system. In: IOP Conference Series: Earth and Environmental Science, 6th International Conference on Marine Technology (SENTA 2021) , 27 November 2021 , Surabaya, Indonesia. pp. 1-10., 972 (012083). ISSN 1755-1315

Muhammad Fikri, Muhammad Azian and Jaliliantabar, Farzad and Abdul Adam, Abdullah (2022) Design and fabrication of Thermophoretic Soot sampling device. In: National Conference for Postgraduate Research 2022 , 15 Nov 2022 , Online Conference. pp. 1-9.. (Unpublished)

Muhammad Fitri, Mohamed Hassan (2013) Blade design for windmill generator. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Hadi, Hassan and Syazwana, Sapee and Daing Mohamad Nafiz, Daing Idris and Ahmad Fitri, Yusop and F., Basrawi and Azri Hizami, Rasid (2018) Chassis dynamometer for electric two wheelers. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-5., 225 (03016). ISSN 2261-236X

Muhammad Hafiz, Azam (2012) Experimental and finite element evaluation of bending for aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hafizuddin, Salim (2012) Development of variable intake system for sparkignition engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Haikal, Abdullah (2013) Development of rough grinding equipment for raw biomass resource. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Halifi, Muhamad (2013) Design of MIDI decoder and controller program for MIDI auto saxophone. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Hamizi, Msduki (2010) Simulation of common rail for hydrogen engine in automobile application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hanafi, Yusop (2018) Transient analysis for leak signature identification based on Hilbert Huang transform and integrated kurtosis algorithm for z-notch filter technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Hanafi, Yusop and Ghazali, M. F. and Mohd Fadhlan, Mohd Yusof and Muhammad Aminuddin, Pi Remli (2021) Pipeline condition assessment by instantaneous frequency response over hydroinformatics based technique—An experimental and field analysis. Fluids, 6 (11). pp. 1-29. ISSN 2311-5521. (Published)

Muhammad Hanif, Abd Rashid and Nik Hisyamudin, Muhd Nor and Siti Norhana, Selamat and Mohd Fahrul, Hassan and Abd Khalil, Abd Rahim and Mohd Fauzi, Ahmad and Al Emran, Ismail and Badrul, Omar and Mohd Faiz, Mokhtar and Faiz, Mohd Turan and Yokoyama, Seiji (2017) Eco-design of Low Energy Mechanical Milling Through Implementation of Quality Function Deployment and Design for Sustainability. In: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy , 1–3 August 2016 , Jogjakarta, Indonesia. pp. 1-10., 1831 (020039). ISBN 978-0-7354-1499-0

Muhammad Hashra Izreen, Mohd Hashidin (2014) The effect of wind load to non-engineering roof system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Hasri, Ibrahim (2009) Thermal response of silicon during virtual laser micromachining. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Hatifi, Mansor (2010) Intelligent Active Force Control Applied To Precise Machine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Muhammad Hazim, Md Yusoff (2010) Availability and estimation of renewable energy for habitants living in remote places. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hazli, Mazlan and Todo, Mitsugu and Ida Laila, Ahmad and Takano, Hiromitsu and Yonezawa, Ikuho and Abdul Halim, Abdullah and Muhammad Hilmi, Jalil and Nur Dalilah Diyana, Nordin (2020) Biomechanical evaluation of two different types of interbody cages in posterior lumbar interbody fusion. International Journal of Emerging Trends in Engineering Research, 8 (1.2 Special). pp. 221-226. ISSN 2347-3983. (Published)

Muhammad Hafiz, Hamzah and Nor Azwadi, Che Sidik and Tan, Lit Ken and R., Mamat and Najafi, G. (2017) Factors Affecting the Performance of Hybrid Nanofluids: A Comprehensive Review. International Journal of Heat and Mass Transfer, 115. pp. 630-646. ISSN 0017-9310. (Published)

Muhammad Hilmi, Jalil and Mitsugu, Todo (2017) Development and Characterization of Gear Shape Porous Scaffolds Using 3D Printing Technology. International Journal of Bioscience, Biochemistry and Bioinformatics, 7 (2). pp. 74-83. ISSN 2010-3638. (Published)

Muhammad Hilmi, Jalil and Omar, Nadzeri and Muhd Hazli, Mazlan and Mahendran, Kugendran and Mohd Firdaus, Mak Nanyan (2021) Polymeric spinal cage developed via ct-fea. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Muhammad Ihsan, Abdul Latiff and Nuruzzaman, D. M. and Shahnor, Basri and Noor Mazni, Ismail and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman (2018) Preparation and characterization of 6-layered functionally graded nickel-alumina (Ni-Al2O3) composites. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Muhammad Ikhwan, Izhar (2012) Development of autonomous underwater vehicle. Faculty of Electrical Engineering, Universiti Malaysia Pahang.

Muhammad Iqbal, Mohd Azit (2012) Optimization of carbon dioxide laser cutting parameters. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Iqbal, Ghazali (2013) Investigation of evacuated direct flow tube solar collector using different types of solar relfector with water-bases nanofluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Iqbal Jafar, Jafar (2013) Development of shaker ( mechanical ). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhammad Irfan Syahmi, Sidun and Ismayuzri, Ishak (2023) Bead characterization for wire based laser directed energy deposition fabrication process. Jurnal Teknologi, 13 (2). pp. 58-64. ISSN 2541-1535. (Unpublished) (Unpublished)

Muhammad Izhar, Ishak (2013) Research on skid control system of small electric vehicle : (the effect of regenerative brake control on in-wheel small electric vehicle with anti-lock brake system). Masters thesis, Tokai University (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Izzat, Haslan (2009) Design and fabrication of reliability test fixtures (hook button stroke). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzuddin, Masrom (2012) Analysis of electromagnetic energy harvester for various length of beam. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Izzuddin Hilmi, Zainal Abidin (2010) Computational fluid dynamics (CFD) analysis of a miniature wind turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad K. A., Saienudin and M. F. F., Ab Rashid (2021) A study of parallel machine scheduling in an electronic industry using heuristics approach. In: The 2nd International Conference on Technology, Engineering and Sciences (ICTES 2021) , 3 - 4 April 2021 , Langkawi, Kedah & Online Conference. pp. 1-5., 2401 (1).

Muhammad Khairol Annuar, Zaini and Lee, Yen-Sian and Nurazima, Ismail and Lim, Kok-Sing and Udos, Waldo and Mohd Hafizi, Zohari and Yang, Hang-Zhou and Harith, Ahmad (2019) In-fiber Fabry Perot interferometer with narrow interference fringes for enhanced sensitivity in elastic wave detection. Optical Fiber Technology, 53. pp. 1-2. ISSN 1068-5200. (Published)

Muhammad Khairuddin, Pawiran (2012) Preparation of copper nano lubricant for high end application. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Muhammad Mukhtar, Noor Awalludin (2020) Micro-explosion phenomenon of tri-fuel emulsion. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).

Muhammad Nabil Fikri, Mohamad (2018) Investigation on thermo-physical properties and thermal-hydraulic performance of TiO2-SiO2 nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Muhammad Nabil Fikri, Mohamad and Azmi, W. H. and Khamisah, Abdu Hamid and R., Mamat (2018) Heat transfer performance of Tio2– SiO2 nanofluid in water-ethylene glycol mixture. Journal of Mechanical Engineering, SI 5 (1). pp. 39-48. ISSN 1823-5514. (Published)

Muhammad Nadzir, Nordin (2013) Innovation and development of a high pressure water nozzle discharged with curtain spray for oil leakage in offshore. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Naqeeb, Meor Ruslan (2013) Fabrication of automative body part using carbon fiber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Naqiuddin, Mat Salleh (2017) A study on double fillet lap welding of thin sheet AZ31B magnesium alloy by low power fiber laser. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak@Muhammad, Mahadzir).

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay (2017) Effect of Fiber Laser Parameters on Laser Welded AZ31B Magnesium Alloys. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12., 90 (01032). ISSN 2261-236X

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay and Aiman, Mohd Halil (2016) A Study on Bead-on-Plate Welding of AA7075 using Low Power Fiber Laser. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). 2065 -2075. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and M. H., Aiman and Q., Zaifuddin (2019) The effect of laser surface hardening on surface hardness of mild steel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished)

Muhammad Naqiuddin, Mat Salleh and Mahadzir, Ishak and Yamasaki, Kazuhiko and Moinuddin, Mohammed Quazi and Aiman, Mohd Halil (2021) Pulsed Nd: YAG laser parameters effect on welding uncoated Advance High Strength Steel (AHSS) for automotive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 91-100. ISSN 2289-7879. (Published)

Muhammad Nasiruddin, Anidin (2009) Finite element analysis of upper crankshaft six stroke engine using CAE software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Nazmi Hadi, Roslan and Nor Atiqah, Zolpakar and Normah, Mohd Ghazali and Fatimah Al-Zahrah, Mohd Saat (2019) Application of 3D printing technology in thermoacoustic stack fabrication. In: The 11th International Meeting on Advances In Thermofluids (IMAT2019) , 7-8 November 2019 , Chikushi Campus, Kyushu University, Japan. pp. 1-6.. (Unpublished)

Muhammad Nazmi Hadi, Roslan and Zolpakar, N. A. and Normah, Mohd-Ghazali and Fatimah Al-Zahrah, Mohd Saat (2021) Analysis of 3D printed stack in thermoacoustic cooling. Evergreen, 8 (1). pp. 131-137. ISSN 2189-0420. (Published)

Muhammad Nazrin, Ramli and Ping, Jack Soh and Mohd Faizal, Jamlos and Herwansyah, Lago and Norazizan, Mohd Aziz and Azremi, Abdullah Al-Hadi (2017) Dual-Band Wearable Fluidic Antenna With Metasurface Embedded In A PDMS Substrate. Applied Physics A, 123 (149). pp. 123-149. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Muhammad Noor Afiq Witri, Muhammad Yazid and Nor Azwadi, Che Sidik and R., Mamat and G., Najafi (2016) A Review of the Impact of Preparation on Stability of Carbon Nanotube Nanofluids. International Communications in Heat and Mass Transfer, 78. pp. 253-263. ISSN 0735-1933. (Published)

Muhammad Nor Azril, Zulkafli and Norazlianie, Sazali and Saiful Anwar, Che Ghani and Maurice, Kettner (2021) Investigation on an innovative hydrocarbon sensor for real drive emissions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (2). pp. 39-49. ISSN 2289-7879. (Published)

Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Muhammad Amirul, Abdullah and Rabiu Muazu, Musa and Noor Azuan, Abu Osman and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2020) The classification of skateboarding tricks : A transfer learning and machine learning approach. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 1-12. ISSN 2637-0883. (Published)

Muhammad Nur Arif, Mohamad Asri (2023) Model updating of crash box structures for crashworthiness study. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Muhammad Nur Farhan, Saniman and Nadzir Akif, Dzulkifli and Khairul Anuar, Abd Wahid and Wan Mansor, Wan Muhamad and Khairul Azhar, Mohamad and Erny Afiza, Alias and Jamilah, Mohd Shariff (2022) Water retention properties of a fused deposition modeling based 3D printed polylactic acid vessel. In: Advanced Maritime Technologies and Applications Papers from the ICMAT 2021. Advanced Structured Materials book series, 166 . Sprinter. Champ, pp. 311-323. ISBN 978-3-030-89991-2(Printed); 978-3-030-89992-9 (Online)

Muhammad Nur Qayyum Kamarulbahrin, Kamarulbahrin and Zubaidah, Zamri and Amiril Sahab, Abdul Sani (2023) Parametric investigations of drying roselle calyces flower. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 51-56. ISSN 2637-0883. (Published)

Muhammad Rafsanjani, Basri and Fahmi, Samsuri (2022) Design and analysis of an early heart attack detection using openCV. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 163..

Muhammad Rizuan, Musa (2010) Characteristic of palm oil methyl ester as alternative fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Azmi (2012) Optimization of abrasive machining of ductile cast iron using nanoparticles : A multilayer perceptron approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Ismail (2011) Experimental study of formability of sheet metal in deep drawing process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Sahrulfahmi, Md Senan and Mohamad Athmar Afiq, Shalahuddin and Muhammad Syazrin, Rasdi and Nur Halimahtun, Manap and Nurainaa, Mohd Yusof and Juliawati, Alias (2021) Tri-Electrode fushoku test kit. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Muhammad Saifuddin, Idris and N. M. M., Ammar (2010) 2d Deep Cavity Flow, Lid Driven Using Conventional Methodwith New Perspective. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Muhammad Saiful, Mustafa (2011) Turbulent flame speed in spark ignition engine combustion process using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Salihin, Saealal and Mohd Zaidi, Mohd Tumari and Kamarul Hawari, Ghazali and Mohd Syakirin, Ramli (2012) Practical Sway Motion Control for Double Pendulum-type Overhead Crane System. International Journal on Smart Sensing and Intelligent Systems, 5 (2). pp. 362-380. ISSN 1178-5608. (Published)

Muhammad Saufi, Abdul (2010) Experimental study on the noise reduction of hydraulic bench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Shafinaim Akmal, Zulkifli and Ahmad Shahrizan, Abdul Ghani and Mohd Yazid, Abu and Fusaomi, Nagata (2023) Development of controllino program to integrate the sensor inputs for motors control. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 36-45. ISSN 2637-0883. (Published)

Muhammad Shahrin, Sabri and M. M. A., Rahman and F. T., Suhaimi and A. S., Ngah and A., Aseli and Muhammad Fazrul Qazwan, Mohd Zaki (2015) Design and Development of Test Rig for Conversion of Pure Bio Oil Onto Biodiesel for Internal Combustion Engine Using Acidic (Esterification) Method and Alkaline (Trans-Esterification) Method. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-14..

Muhammad Shahruddin, Azmi and Munirah, Mohamad Izham and Muhammad Hilmi, Jalil and Muhammad Hazli, Mazlan (2023) CT-FEA of inhomogeneous lumbar with different loadings of the spinal cage. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10894 -10905. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muhammad Shahrul, Sabri (2013) Numerical and experimental analysis of wake effect on tidal current turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Suhaimi, Man and Hanida, Abdul Aziz and Syamsul B., Abdullah (2022) Application of ILs as carbonate scales dissolver. Current Research in Green and Sustainable Chemistry, 5. pp. 1-7. ISSN 2666-0865. (Published)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Wan Azmi, Wan Hamzah (2021) Heat transfer and pressure drop of water based hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC. Journal of Advanced Research in Numerical Heat Transfer, 4 (1). pp. 1-13. ISSN 2289-7879. (Published)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Wan Azmi, Wan Hamzah and Wan Ahmad Najmi, Wan Mohamed (2021) The characteristics of hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (3). pp. 96-109. ISSN 2289-7879. (Published)

Muhammad Syafi’i, Mass Duki and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed (2021) The classification of taekwondo kicks via machine learning: A feature selection investigation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 61-67. ISSN 2637-0883. (Published)

Muhammad Syahir, Ali and M. T., Musthafah and A. M., Mohd Shafie and R. A., Bakar (2014) Simulation of Single Cylinder Engine Fuel with Alternative Fuel by Using Available Software. International Review of Mechanical Engineering (IREME), 8 (4). pp. 798-802. ISSN 1970-8734. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and M. H., Mohd Ali (2022) Shear strength of soft soil reinforced with singular bottom ash column. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 100..

Muhammad Syawal, Mat Jahak and Ismayuzri, Ishak and Suhaimi, Puteh and Sutiman, . and I. Wayan, Adiyasa (2023) Identification of transfer function to model brush temperature of a small DC machine at no-load. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 50-56. ISSN 2637-0883. (Published)

Muhammad Taqiuddin, Mohamad Tabarani (2010) Design and analysis of a MRI miniature for children. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Umar, Ab Aziz and Junaida, Sulaiman (2021) Umpcare counselling system using ionic angular. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Muhammad Yazid, Muhammad Ammar Faris and Jamil, Norlida and Muhmed Razali, Nik Nurul Husna and Yusoff, A. R. (2016) Finite element analysis of hybrid energy harvesting of piezoelectric and electromagnetic. In: MATEC Web of Conferences; 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016 , 2 - 3 August 2016 , Cyberjaya, Selangor. pp. 1-10., 90 (01039). ISSN 2261-236X

Muhammad Yusri, Ismail (2018) Predicting engine performance and exhaust emissions of a spark ignition engine fuelled with 2-butanol-gasoline blends using RSM and ANN models. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Yusuff Izzuddin, Roslan and Ahmad Redza, Ahmad Mokhtar (2022) Metal coating by TIG arc deposition method. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 111-118. ISSN 2636-9575. (Published)

Muhammad Zaid, Nor Azlan (2013) Analysis on the performances of a micro gas turbine cogeneration system in sewage treatment plants. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaim, Hassan (2010) Flow characteristic of an elliptically shaped piezoactuated micropump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaki, Zainal (2008) Simulation test of automotive constant velocity joint (CVJ) using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaki, Che Md Nor (2012) Experimental and simulation study on the effect of inner span in a four-point bending test (4pb). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zakiran, Abd Aziz (2013) Identification of kinematic hardening parameters for mild steel by cyclic loading. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Zikri, Japri (2022) Noise and vibration analysis in the diesel engine based on biodiesel usage. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Muhammad Zul Husaini, Noor Azmi (2009) Suction controller for window wiping robot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Muhammad Zulfadhli, Md Zaki (2012) Design and analysis of a composite drive shaft for an automobile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zulhilmi, Mansor (2010) PC based small arm robot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammmad Rais, Rahim (2023) Development of a non-inertia mass fibre bragg grating accelerometer based on a single diaphragm mechanism and its vibration response analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Firdaus, Hassan).

Muhd Ridzwan, Muhamad Jamil (2008) Design and fabricate the prototype of a motorized cutter for harvesting palm fruit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muller, Dario Cyril and Selvanathan, Shanmuga Priya and Cuce, Erdem and Kumarasamy, Sudhakar (2023) Hybrid solar, wind, and energy storage system for a sustainable campus : A simulation study. Science and Technology for Energy Transition (STET), 78 (13). pp. 1-12. ISSN 2804-7699. (Published)

Munanday, Anbananthan Pillai and Norazlianie, Sazali (2022) Facial recognition for human disposition identification. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 62..

Munanday, Anbananthan Pillai and Norazlianie, Sazali and Asogan, Arjun and Ramasamy, Devarajan and Ahmad Shahir, Jamaludin (2023) The Implementation of Transfer Learning by Convolution Neural Network (CNN) for Recognizing Facial Emotions. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 255-276. ISSN 2462-1943. (Published)

Munira, Ali and Nur Najmiyah, Jaafar and Fazilah, Abdul Aziz and Nooraizedfiza, Zainon (2014) Review on Non Uniform Rational B-Spline (NURBS)Concept and Optimization. Advanced Materials Research, 903. pp. 338-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Munirah, Nawi and Norazlianie, Sazali and S. A., Che Ghani and Kettner, Maurice (2021) Newly Developed Thermal Load Profile for Enhancement in Hot Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 83-94. ISSN 2289-7879. (Published)

Murthy, Puhanes and Nurul Akmal, Che Lah (2022) The optical and structural of the synthesised cu nanostructure using hydrothermal microwave-assisted method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 97..

Murugan, P. and Dhanushkodi, S. and Sudhakar, K. and Wilson, Vincent H. (2021) Industrial and small-scale biomass dryers: an overview. Energy Engineering, 118 (3). 435 -446. ISSN 0199-8595. (Published)

Musa, Rabiu Muazu and Afrouzeh, Mohsen and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Afroozeh, Mohammad Sadegh and Mohamad Razali, Abdullah (2022) The application of modified equipment in retention of motor task performance amongst children of low and high working memory capacity. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 931-939., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Musa, Rabiu Muazu and Hassan, Isyaku and Mohamad Razali, Abdullah and Mohd Nazri Latiff, Azmi and Abdul Majeed, Anwar P. P. and Noor Azuan, Abu Osman (2021) Surveillance of injury types, locations, and intensities in male and female tennis players: A content analysis of online newspaper reports. International Journal of Environmental Research and Public Health, 18 (23). pp. 1-10. ISSN 1661-7827. (Published)

Musfirah, Abdul Hadi and Jaharah, A. Ghani (2020) Enhancement of surface integrity in cryogenic high speed ball nose end milling process of inconel 718. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 512-518.. ISBN 978-981-15-0950-6

Mussada, Eswara Krishna and Choo, Chee Hua and Prasada Rao, A. K. (2018) Surface hardenability studies of the die steel machined by WEDM. Materials and Manufacturing Processes, 33 (16). pp. 1745-1750. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Muthanna, Jamil and Mohd Adnin, Hamidi and Ahmad Fitri, Yusop and Muhammad Anas, Abdul Aziz and Mohamad Fathin, Hamidi and Tatchineswaranpillai, Sundram (2020) Simulation of the ignition mechanisms of low and high octane number blended fuels in HCCI engine. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-11., 788 (012058). ISSN 1757-899X

Mutra, R. R. and Reddy, D. M. and Amarnath, M. and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani (2023) Artificial neural network-based fault diagnosis of gearbox using empirical mode decomposition from vibration response. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10695-10709. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muzafar, A. K. and Rashidi, M. M. and Mahadzir, Ishak and Shayfull, Z. (2016) Effect on Mechanical Properties of Heat Treated High Manganese Austenitic Cast Iron. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78 (01081). ISSN 2261-236X

Muzafar, A. K. and Rashidi, M. M. and Mahadzir, Ishak and Shayfull, Z. (2016) Investigation on Microstructure of Heat Treated High Manganese Austenitic Cast Iron. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-9., 78 (01079). ISSN 2261-236X

Muzahid, Abu Jafar Md and Syafiq Fauzi, Kamarulzaman and Rahim, Md Abdur (2020) Learning-based conceptual framework for threat assessment of multiple vehicle collision in autonomous driving. In: IEEE Emerging Technology in Computing, Communication and Electronics (ETCCE 2020) , 21-22 December 2020 , United International University (UIU)-Virtual, Dhaka, Bangladesh. pp. 1-7., 20. ISBN 78-1-6654-1962-8

N

N, Abdul Wahab and Fatchurrohman, Nanang and Z., Zulkfli (2020) Investigation on the effect of different friction stir machining tools shape on the mechanical properties of magnesium alloy work piece. IOP Conference Series: Earth and Environmental Science, 700. pp. 1-9. ISSN 1755-1307(Print); 1755-1315(Online). (Published)

N., Abdul Rahman and M. F. F., Ab Rashid (2024) Modeling of Optimizing Multi-hole Drilling Toolpath Distance with Multiple Tool Dimension. In: Journal of Physics: Conference Series. 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023) , 12-13 September 2023 , AC Marriot Hotel, Kuantan, Pahang. , 2688 (012001). ISSN 1742-6596

N., Abdullah and Jaafar, Jamiluddin and Hagos, F. Y. and Azri, Alias and N. S. N., Azmi (2019) Experimental investigation of pineapple leaf fiber as biomass fuel for renewable energy resource. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

N., Affaf and H.S., Wong and M. H., Aiman and M., Ishak and M. M., Quazi (2022) The Effect of Laser Power and Laser Scan Passes on Bending Angle of Stainless Steel AISI 304 Laser Bending. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 899-907.. ISBN 978-981-19-1457-7

N., Affaf and J., Alias and Nasrul Azuan, Alang (2024) Montmorillonite (MMT) nanoclay in smart coatings for corrosion protection of metal alloy. In: Journal of Physics: Conference Series. 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023) , 12-13 September 2023 , AC Marriot Hotel, Kuantan, Pahang. , 2688 (012012). ISSN 1742-6596

N., Agus Salim and M. F. F., Ab Rashid (2023) Production Cost Modeling and Simulation in the Glove Manufacturing Industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 9-16. ISSN 2636-9575. (Published)

N., Chik and Salwani, Md Zain and Ahmad Johari, Mohamad and Mohd Zaidi, Sidek and Wan Hanisah, Wan Ibrahim and Reif, Alexandra and Rakebrandt, J.H. and Pfleging, W. and Liu, X. (2018) Bacterial adhesion on the titanium and stainless-steel surfaces undergone two different treatment methods: polishing and ultrafast laser treatment. In: 3rd International Conference on Global Sustainability and Chemical Engineering, ICGSCE 2017 , 15-16 February 2017 , Marriot Hotel, Putrajaya; Malaysia. pp. 1-7., 358 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

N., Ismail and M. F. M., Yusof and C. K. E., Nizwan and S., Abdullah (2015) On the Need of the Wavelet Analysis for Fatigue Condition Monitoring. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

N., Jamil and M. F., Hassan and S. K., Lim and A. R., Yusoff (2021) Predictive maintenance for rotating machinery by using vibration analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8289 -8299. ISSN 2231-8380 (online). (Published)

N., Samsuri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and M. N. M., Razali (2021) Simulation Modeling The Performance of Ocean Thermal Energy Conversion Power Cycle. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-12., 1062 (012034). ISSN 1757-899X

N., Samsuri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and M. N. M., Razali (2021) Techno-economic efficiencies and environmental criteria of Ocean Thermal Energy Conversion closed Rankine cycle using different working fluids. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. , 1062 (012042). ISSN 1757-899X

N., Sazali and H., Ibrahim and A. S., Jamaludin and M. A., Mohamed and W. N. W., Salleh and M. N. Z., Abidin (2020) A short review on polymeric materials concerning degradable polymers. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-15., 788 (012047). ISSN 1757-8981 (Print), 1757-899X (Online)

N. A., Alang and J., Alias and Z., Sajuri and S., Nur Atiqah (2021) Finite Element Modelling of Creep Rupture on Grade 91 Steel using Monkman-Grant Ductility based Damage Model. International Journal of Integrated Engineering, 13 (7). pp. 108-118. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

N. A., Halim and Siregar, J. P. and Mathivanan, D. and Bachtiar, Dandi and Z., Ghazalli and M. R. M., Rejab and Tezara, C. (2018) The performance of mengkuang leaf fiber reinforced low density polyethylene composites. Journal of Mechanical Engineering and Sciences (JMES), 12 (2). pp. 3645-3655. ISSN 2231-8380 (online). (Published)

N. A., Johari and J., Alias and A., Zanurin and N. S., Mohamed, and N. A., Alang and M. Z., M. Zain (2022) Recent progress of self-healing coatings for magnesium alloys protection. Journal of Coatings Technology and Research, 19 (3). pp. 757-774. ISSN 1547-0091. (Published)

N. A., Mutalib and I., Ismail and S. M., Soffie and S. N., Aqida (2019) Magnetorheological finishing on metal surface: a review. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012092). ISSN 1757-899X

N. A., Nadzri and M. M., Saari and M. A. H. P., Zaini and A. M., Halil and A. J. S., Hanifah and M., Ishak (2020) Depth Evaluation of Slits on Galvanized Steel Plate Using A Low Frequency Eddy Current Probe. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29 July 2019 , Kuantan, Pahang, Malaysia. pp. 59-66., 632. ISBN 978-981-15-2317-5

N. A., Nazri and M. S. M., Sani (2017) Finite Element Normal Mode Analysis of Resistance Welding Jointed of Dissimilar Plate Hat Structure. In: 4th International Conference On Mechanical Engineering Research (ICMER) 2017 , 1-2 August 2017 , Hotel Swiss Graden, Kuantan. pp. 1-9., 257 (1). ISSN 17578981

N. A., Nazri and M. S. M., Sani and M. N., Abdul Rani and M. A., Yunus (2018) Joining strategy analysis of structural dynamic in top hat plate of dissimilar materials. In: International Conference On Noise, Vibration and Comfort (NVC 2018) , 5-7 March 2018 , Putrajaya Dorset, Putrajaya. pp. 1-9.. (Unpublished)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2015) Forced Convection Heat Transfer Using Water-Ethylene Glycol (60:40) Based Nanofluids in Automotive Cooling System. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2747-2755. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2015) Thermal Conductivity Enhancement of Al2O3 Nanofluid in Ethylene Glycol and Water Mixture. Energy Procedia, 79. pp. 397-402. ISSN 1876-6102 . (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2014) Viscosity of Aluminium Oxide (Al2O3) Nanoparticle Dispersed in Ethylene Glycol. Applied Mechanics and Materials, 660. pp. 735-739. ISSN 1662-7482. (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid and G., Najafi (2015) Effect of Aluminium Oxide Nanoparticles Suspended in Different Eg-Base Ratio to Enhanced Thermal Conductivity. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid and G., Najafi (2015) Experimental Studies on Convective Heat Transfer Performance Using Ethylene Glycol Based Nanofluid. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

N. A. A., Sathari and L. H., Shah and A. R., Razali (2014) Investigation of Single-pass Double-pass Techniques on Friction Stir Welding of Aluminium. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1053-1061. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2014) Study on Dissimilar Aluminium Alloys of AA7075 and AA6061 using Friction Stir Welding. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8.. (Unpublished)

N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2020) Computational modal analysis on finite element model of body-in-white structure and its correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7915-7926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and I., Zaman (2017) Correlation of Structural Modal Properties of Go-Kart Frame Structure using Different Type of Joint in Finite Element Modeling. Advanced Science Letters, 23 (11). pp. 11315-11319. ISSN 1936-6612. (Published)

N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2017) Correlation of Numerical and Experimental Analysis for Dynamic Behaviour of a body-in-white (BIW) Structure. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01020). ISSN 2261-236X

N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2015) A Review on Model Updating In Structural Dynamics. IOP Conference Series: Materials Science and Engineering, 100 (1). 012015. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and M. S., Salwani (2019) Comparison of crash behaviour of initial and updated finite element model of car crash box in crashworthiness analysis. In: 1st International colloquium on noise, vibration and comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7.. (Unpublished)

N. A. Z., Abdullah and M. S. M., Sani and Nurul Aina, Husaini and M. M., Rahman and I., Zaman (2017) Dynamics Properties of a Go-Kart Chassis Structure and Its Prediction Improvement Using Model Updating Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3887-3897. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2019) Comparison of crash behaviour prediction of a car crash box using initial and updated finite element model. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh and Nurulakmar, Abu Husain (2020) A review on crashworthiness studies of crash box structure. Thin-Walled Structures, 153 (106795). pp. 1-16. ISSN 0263-8231. (Published)

N. E. H., Zamiruddin and A. S. A., Sani and N., Rosli (2021) Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-10., 1092 (012029).

N. F., Abdullah and Abbas, A. Wahab and Mohd Azri Hizami, Rasid (2018) Study of temperature rise in small brushed DC motor components under different voltage. In: 1st International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8..

N. F., Adnan and M. F., Ghazali (2015) Detecting Leak in Gas Pipeline using Continuous Wavelet Transform and Kurtosis. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 347-351. ISBN 978-967-0257-53-2

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and A. M. A., Hamat (2015) Leak Detection In Gas Pipeline by Acoustic and Signal Processing – A Review. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9.. (Unpublished)

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and A. M. A., Hamat (2015) Leak Detection in Gas Pipeline using Hilbert-Huang Transform. Applied Mechanics and Materials, 815. pp. 403-407. ISSN 1662-7482. (Published)

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and Abdul, Malik and Akmal, Ariffin (2014) Leak Detection in MDPE Gas Pipeline using Dual-Tree Complex Wavelet Transform. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 356-360. ISSN 1991-8178. (Published)

N. F., Jamin and N. M. A., Ghani and Zuwairie, Ibrahim and M. F., Masrom and N. A. A, Razali and A. M., Almeshal (2018) Two-wheeled wheelchair stabilization using interval type-2 fuzzy logic controller. International Journal of Simulation Systems, Science & Technology (IJSSST), 19 (3). 3.1-3.7. ISSN 1473-8031 (print); 1473-804x (online). (Published)

N. F., Yah and M. S., Idris and A. N., Oumer (2016) Numerical Investigation on Effect of Immersed Blade Depth on the Performance of Undershot Water Turbines. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00035). ISSN 2261-236X

N. F. D., Razak and M. S. M., Sani and Azmi, W. H. and Zhang, B. (2017) Noise and vibration analysis for automotive radiator cooling fan. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 Aug. 2017 , Swiss Garden Hotel and Spa, Kuantan, Pahang. pp. 1-9., 257 (1). ISSN 17578981

N. F. D., Razak and M. S. M., Sani and W. H., Azmi and Zhang, B. (2019) Noise source identification of automotive radiator by using sound intensity mapping method. In: 1st International Colloquium On Noise, Vibration And Comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-12., 1262 (012008). ISSN 17426588

N. F. M., Aun and P. J. , Soh and Mohd Faizal, Jamlos and H., Lago and A. A., Al-Hadi (2017) A Wideband Rectangular-Ring Textile Antenna Integrated with Corner-Notched Artificial Magnetic Conductor (AMC) Plane. Applied Physics A, 123 (19). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

N. Fatimah, Abdullah and Abbas A., Wahab and Mohd Azri Hizami, Rasid (2018) Study of temperature rise of small brushed DC motor under different load. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Perpustakaan UMP Pekan. pp. 1-6., 225.

N. H., Husain and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2017) An overview of thixoforming process. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-9., 257 (1). ISSN 17578981

N. H., Kamarudin and M. F. F., Ab Rashid (2017) Modelling of Simple Assembly Line Balancing Problem Type 1 (SALBP-1) with Machine and Worker Constraints. In: International Postgraduate Conference On Engineering, Science & Technology (GUEST2017) , 15-18 October 2017 , Universiti Tun Hussein Onn Malaysia., Johor. pp. 1-10.. (Unpublished)

N. H., Othman and M., Ishak and L. H., Shah (2017) Effect of shoulder to pin ratio on magnesium alloy Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-9., 238 (1). ISSN 17578981

N. H., Razak and M. M., Rahman and K., Kadirgama (2017) Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2539-2551. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. H., Zakaria and N. M. Zuki, N. M. and A. N. M., Rose and M. F. F., Ab Rashid (2016) Lean Manufacturing Implementation in Small and Medium Industry. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES2016) , 5-7 September 2016 , York, United Kingdom. . (Unpublished)

N. K., Romli and M. R. M., Rejab and Bachtiar, Dandi and J. P., Siregar and Salwani, Mohd Salleh and M.F, Rani and Mohamad Nazirul Mubin, Merzuki (2018) Failure behaviour of aluminium/CFRP laminates with varying fibre orientation in quasi-static indentation test. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 17578981

N. K., Romli and M. R. M., Rejab and Xiaoxia, Jiang and Mohamad Nazirul Mubin, Merzuki (2019) Numerical modelling response of laser welded sandwich panel under three-point bending test. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering (IPCME 2018) , 31 October 2018 , UMP Pekan, Pahang. pp. 1-7., 469 (012060). ISSN 1757-899X

N. K., Romli and Xiaoxia, Jiang and S. M., Sofie and M. R. M., Rejab (2020) Three-point bending response of laser-welded sandwich structure with varying number of core and span length. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012011). ISSN 1757-8981 (Print), 1757-899X (Online)

N. M., Fadhillahanafi and K. Y., Leong and M. S., Risby (2013) Stability and Thermal Conductivity Characteristic of Carbon Nanotube Based Nanofluids. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1376-1405. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. M., Ali and Fatimah, Dzaharudin and E. A., Alias (2020) Nonlinear dynamics of a shell encapsulated microbubble near solid boundary in an ultrasonic field. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). pp. 7235-7243. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. M., Maliessa and S. R. A., Idris (2019) Effect of different amount of Silicon Carbide on SAC Solder-Cu Joint performance by using Microwave hybrid heating method. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012110). ISSN 1757-8981

N. M. M., Ammar and Ahmad Alif, Ahmad Adam and Nurul Suraya, Azahari (2013) Predicting Errosion Pattern on Archimedes Screw Runner Blade of Hydro Power. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

N. M. M., Ammar and C. S. N., Azwadi and M. S., Idris (2011) Particle movement in shear cavity flow for different Stokes number using lattice Boltzmann method. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1018-1024., 1440 (1018). ISSN 0094-243X

N. M. M., Ammar and Nasir, Ali and M. S., Idris and A. N., Oumer (2013) Numerical and Qualitative Analysis of a Single Particle Behavior in a Shear Driven Flow in Equilateral Triangular Cavity. Applied Mechanics and Materials, 465-46. pp. 557-561. ISSN 1662-7482. (Published)

N. M. M., Ammar and Nurul Suraya, Azahari and Ahmad Alif, Ahmad Adam (2014) Prediction of Particle Impact on an Archimedes Screw Runner Blade for Micro Hydro Turbine. Applied Mechanics and Materials, 465-46. pp. 552-556. ISSN 1662-7482. (Published)

N. M. M., Ammar and S. M., Mustaqim and N. M., Nadzir (2014) Effect of Highly Pressurized Dispersion Arc Nozzle on Breakup of Oil Leakage in Offshore. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (5). pp. 1051-1056. (Published)

N. M. M., Ammar and S. M., Mustaqim and N. M., Nadzir (2014) Effect of Highly Pressurized Dispersion Arc Nozzle on Breakup of Oil Leakage in Offshore. In: International Conference on Automotive and Mechanical Engineering , 29-30 May 2014 , Tokyo, Japan. .

N. M. M., Zawawi and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Mahendran, Samykano (2018) Experimental investigation on thermo-physical properties of metal oxide composite nanolubricants. International Journal of Refrigeration, 89. pp. 11-21. ISSN 0140-7007. (Published)

N. M. S., Abd Malek and S. R., Mohamed and S. A., Che Ghani and W. S., Wan Harun (2015) Critical Evaluation on Structural Stiffness of Porous Cellular Structure of Cobalt Chromium Alloy. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (1).

N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2008) An Investigation into the Effect of Materials on Joining for Automotive Panel Using Tailor Welded Blanks. In: Regional Conference on Vehicle Engineering and Technology, RIVET08 , 15-17 July 2008 , Kuala Lumpur. pp. 22-26..

N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and M., Hafizuddin (2008) Regenerative Chatter in End Milling on Mould Aluminum Alloys. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. .

N. M. Zuki, N. M. (2012) Decomposition of Manufacturing Processes: A Review. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 545-560. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N., Mohd Rose and Woh, Yu Ting (2014) Production Layout Improvement for Steel Fabrication Works. In: International Conference on Industrial Engineering and Applications (ICIEA 2014) , 29-30 March 2014 , Sydney, Australia. pp. 1-5..

N. M. Zuki, N. M. and Mohd Kamal, Mohd Nawawi and Adam Shariff Adli, Aminuddin (2015) Hybrid Knowledge-Based System for Collaborative Green Automotive Manufacturing Management. Applied Mechanics and Materials, 752/53. pp. 1333-1338. ISSN 1662-7482. (Published)

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and U., Jamaluddin (2015) Virtual Trial Protocol Analysis of Nursing Workload Intensity within ICU. International Conference for Innovation in Biomedical Engineering and Life Sciences, 56. pp. 294-297. ISSN 1680-0737. (Published)

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and Ummu Kulthum, Jamaludin (2016) Trial Protocol Analysis of Nursing Workload Intensity within ICU. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 294-297. ISBN 978-981-10-0265-6 (Print); 978-981-10-0266-3 (Online)

N. N. A., Rahman and Nafrizuan, Mat Yahya (2021) A mathematical model of a brushed DC motor system. Data Analytics and Applied Mathematics (DAAM), 2 (2). pp. 60-68. ISSN 2773-4854. (Published)

N. N. M., Zawawi and Azmi, W. H. and Sharif, M. Z. and Shaiful, A. I. M. (2019) Composite nanolubricants in automotive air conditioning system: An investigation on its performance. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012078). ISSN 1757-899X

N. Q., Radzuan and Mohd Hasnun Ariff, Hassan and Mohd Nadzeri, Omar and Nur Aqilah, Othman and M. A., Mohamad Radzi and K. A., Abu Kassim (2023) The effect of motorcycle helmet type on head response in oblique impact. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10786-10797. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. S., Arifin and S. M., Zokri and L. A., Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and N. F., Mohammad (2017) Mathematical Modeling on Aligned Magnetic Field of Two-Phase Dusty Casson Fluid. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 442-444. ISBN 9789670257884

N. S., Mohamed and J., Alias and N. A., Johari and A., Zanurin (2023) pH-responsive nanocapsules as smart coating for corrosion protection: A review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 329 -337.. ISSN 2195-4356 ISBN 978-981191456-0

N. S., Mohamed and J., Alias (2017) A Review on the Effect of Welding on the Corrosion of Magnesium Alloys. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012028). ISSN 1757-899X

N. S., Mohamed and Juliawati, Alias (2019) The influence of friction stir welding of dissimilar AZ31 and AZ91 magnesium alloys on the microstructure and tensile properties. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6675-6683. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. S., Mohamed, and J., Alias and N. A., Johari and N. A., Alang and A H., Ahmad (2022) Development of smart self-healing coating for the corrosion protection of magnesium alloys: a brief review. Journal of Adhesion Science and Technology. ISSN 0169-4243. (In Press / Online First) (In Press / Online First)

N. S. M., Noor and Z., Ghazalli and M. R. M., Rejab and F. A., Fauzi and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2017) A Comparison of Muscular Activity among European, Korea and Malaysian During Seating Using Musculoskeletal Computational Analysis Method. Advanced Science Letters, 23 (11). pp. 11471-11474. ISSN 1936-6612. (Published)

N. S. M., Noor and Z., Ghazalli and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2016) The enhancement of driver seat comfort for small size car: a preliminary study. Malaysian Journal of Public Health Medicine, 16 (Suppl. 1). pp. 108-114. ISSN 1675-0306. (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama (2015) Neural Network Modeling Of Grinding Parameters Of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2608-2621. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque (2019) Preparation methods and challenges of hybrid nanofluids: A review. In: 4th International Symposium on Fluid Mechanics and Thermal Sciences (4TH IS-FMTS 2019) , 13-15 December 2019 , Palm Garden Hotel IOI Resort City, Putrajaya, Malaysia. pp. 1-13.. (Unpublished)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2017) Experimental investigation on properties of hybrid nanofluids (TiO2 and ZnO) in water–ethylene glycol mixture. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3087-3094. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. S. M., Shalahim and Siti Zawiah, M. D. and Case, Keith (2015) The Relationship Between Anthropometry and Hand Grip Strength Among Elderly Malaysians. International Journal of Industrial Ergonomics, 50. pp. 17-25. ISSN 0169-8141. (Published)

N. T., Rao and A. N., Oumer and Ummu Kulthum, Jamaludin and A. Y., Adam (2016) Numerical Analysis of Flow and Heat Transfer Characteristics of CO2 at Vapour and Supercritical Phases in Micro-Channels. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00011). ISSN 2261-236X

N. T., Rao and A. N., Oumer and Ummu Kulthum, Jamaludin and Hassan, Ibrahim and F., Basrawi and A. Y., Adam (2017) Model Validation for Flow and Heat Transfer Characteristics of Supercritical CO2 in Mini-Channels. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4312-4317. ISSN 1819-6608. (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Mahendran, Samykano and G., Najafi and Nor Azwadi, Che Sidik (2019) An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130. pp. 1163-1169. ISSN 0017-9310. (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Najafi, G. and Nor Azwadi, Che Sidik (2019) Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil. International Journal of Heat and Mass Transfer, 131. pp. 1196-1204. ISSN 0017-9310. (Published)

N. W., Awang and D., Ramasamy and M. M., Rahman and M. M., Noor and K., Kadirgama (2018) Wear testing analysis on cylinder head valve for CNG fueled engine. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. p. 1.. (Unpublished)

N. W., Awang and Sakinah, Hisham and D., Ramasamy and K., Kadirgama and Mohd Kamal, Kamaruzzaman (2023) Statistical Approach to the Cellulose Nanocrystal Tribological Behavior on the Piston Liner Contact Using Full Factorial Design (FFD). In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 351-363.. ISBN 978-981-19-4425-3

N. W., Z. Abidin and N., Salim and M. F. F., Ab Rashid and N. M. Zuki, N. M. and Ahmad Nasser, Mohd Rose and Ahmad Redza, Ahmad Mokhtar (2022) Experimental of multi-holes drilling toolpath using particle swarm optimization and CAD-CAM software on PCB. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 197-204., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

N. Z. M., Zaid and M. R. M., Rejab and A. F., Jusoh and Bachtiar, Dandi and Siregar, J. P. (2017) Effect of Varying Geometrical Parameters of Trapezoidal Corrugated-Core Sandwich Structure. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01018). ISSN 2261-236X

N. Z. M., Zaid and M. R. M., Rejab and A. F., Jusoh and Bachtiar, Dandi and Siregar, J. P. (2016) Finite Element Analysis of Trapezoidal Corrugated-Core for Sandwich Structure. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

N. Z. M., Zaid and M. R. M., Rejab and A. F., Jusoh and Bachtiar, Dandi and Siregar, J. P. and Zhang, Dian Ping (2016) Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture ((IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-9., 78 (01041). ISSN 2261-236X

N. Z. M., Zaid and M. R. M., Rejab and N. A. N., Mohamed (2016) Sandwich Structure Based On Corrugated-Core: A Review. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00029). ISSN 2261-236X

N.A., Che Azhar and M.A., Mansor (2013) Development of Plant Maintenance Management System (PMMS): a Case Study. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-5..

N.A.Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2021) Study of modal properties and crashworthiness performance of crash box numerical model with different joining modelling strategies. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-12., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

N.I, Nik Izual and C.S, Nor Azwadi (2010) Lattice Boltzmann Numerical Scheme for the Simulation of Natural Convection in an Inclined Square Cavity. WSEAS TRANSACTIONS on MATHEMATICS, 9 (6). ISSN ISSN: 1109-2769. (Published)

N.M.H.M., Hassan and Nasrul Hadi, Johari and M.N., Omar and M.H.A., Hassan and Z., Ahmad@Manap (2023) Head injury evaluation strategy for sepak takraw ball heading: a systematic review. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 484-492.. ISBN 978-1-83953-782-0

Nabil Fahmi, Mohtar (2010) Modal analysis of pipe joint spiral wound gasket. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabil Fikri, Yaakub (2008) Production of grease from used lubricant : A feasibility study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nabil Fikri, Zuiful Zubri (2013) Design and analysis of the support structure for an open channel flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabila, Tamar Jaya and Siti Rabiatull Aisha, Idris (2019) Fibre laser soldering operation and its effect onto intermetallic compound at the solder joint: short review. In: Electronic Packaging Interconnect Technology Symposium , 22-26 November 2019 , Penang, Malaysia. pp. 1-9.. (Unpublished)

Nabila, Tamar Jaya and Siti Rabiatull Aisha, Idris and M., Ishak (2018) A review on mechanical properties of SnAgCu/Cu joint using laser soldering. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 97-107. ISBN 9978-981-10-9040-0

Nabila , Abdul Malek and Normah, Othman (2012) UMP and DRB-HICOM: A Mismatch of Expectations. In: Global Conference Academic Research (GCAR2012) , 8 - 11 June 2012 . . (Unpublished)

Nabilah, Harmain (2012) Development of solar dryer system for food drying purposes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nadhrah, Murad (2021) Microstructural evaluation of sn3.0ag0.5cu solder alloy fabricated via powder metallurgy method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Rabiatull Aisha, Idris).

Nadiah Waznah, Zabidi (2008) Experimental determination of convective heat transfer coefficient in wire electro discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nadirah, Ismail (2012) Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nadirah, Ismail (2008) Development of a motorized cutter (electro-mechanical part) and integration system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nafrizuan, Mat Yahya (2023) Mekatronik penuhi keperluan IR 4.0. Kosmo . p. 22.

Nafrizuan, Mat Yahya and Nurainaa, Elias and Muhammad Hazim, Mohd Nordin (2022) A comparison of type 1 and type 2 fuzzy logic controller for DC motor system. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 125-133., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Nagilla, Dheeraj Kumar and V. V., Tyagi and Kumaran, Kadirgama and K., Chopra and A. K., Pandey and Kothari, Richa (2021) Application of phase change materials in solar water heating systems for thermal energy storage. In: IOP Conference Series: Materials Science and Engineering, International Scientific Forum (ISF 2019) , 16-17 December 2019 , Melaka, Malaysia. pp. 1-11., 1127 (012012). ISSN 1757-899X

Naidu Sanderasagran, Ashwindran and Abd Aziz, Azizuddin and Nurye Oumer, Ahmed (2021) Study of √2 conjecture in the construction of drag induced wind turbine blade morphology. Evergreen, 8 (3). pp. 574-585. ISSN 2189-0420. (Published)

Naidu Sanderasagran, Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. (2020) A rudimentary computational assessment of low tip speed ratio asymmetrical wind turbine blades. International Journal of Integrated Engineering, 12 (4). pp. 89-103. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Najafi Khaboshan, Hasan and Jaliliantabar, F. and Abdullah, A. A. and Panchal, Satyam (2023) Improving the cooling performance of cylindrical lithium-ion battery using three passive methods in a battery thermal management system. Applied Thermal Engineering, 227 (120320). pp. 1-12. ISSN 1359-4311. (Published)

Najafi, G. and Ghobadian, B. and Moosavian, A. and Yusaf, T. and R., Mamat and M., Kettner and Azmi, W. H. (2016) SVM and ANFIS for Prediction of Performance and Exhaust Emissions of a SI Engine with Gasoline–Ethanol Blended Fuels. Applied Thermal Engineering, 95. pp. 186-203. ISSN 1359-4311. (Published)

Najiha, M. S. and M. M., Rahman (2016) Experimental Investigation of Flank Wear in end Milling of Aluminum Alloy with Water-Based TiO2 Nanofluid Lubricant in Minimum Quantity Lubrication Technique. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Najiha, M. S. and M. M., Rahman (2015) Experimental Study on Minimum Quantity Lubrication in End Milling of AA6061-T6 Using Tialn Coated Carbide Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2771-2785. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman (2014) A computational fluid dynamics analysis of single and three nozzles minimum quantity lubricant flow for milling. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1891-1900. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2016) Environmental Impacts and Hazards Associated With Metal Working Fluids and Recent Advances in the Sustainable Systems: A Review. Renewable and Sustainable Energy Reviews, 60. pp. 1008-1031. ISSN 1364-0321. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment using Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (In Press / Online First) (In Press / Online First)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the End Milling Process for Aluminium Alloy AA6061T6 Using HSS Tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1140-1150. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the end milling process for aluminum alloy AA6061T6 using hss tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8 (1). pp. 1140-1150. ISSN 2180-1606. (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2015) Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2699-2712. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Minimum Quantity Lubrication: Quantifying Non-Deterministic Component Of Sustainability Index For Machining Operations. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3190-3200. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3345-3360. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Performance Of Water-Based TiO2 Nanofluid During The Minimum Quantity Lubrication Machining Of Aluminium Alloy, AA6061-T6. Journal of Cleaner Production, 135. pp. 1623-1636. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2015) Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3003-3017. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Najihah, Mohamed and M. M., Rahman and K., Kadirgama (2015) Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2722-2737. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najihah, S. N. and Shayfull, Z. and Nasir, S. M. and Mohd Sazli, Saad and Rashidi, M. M. and Fathullah, M. and Noriman, N. Z. (2016) Analysis of Shrinkage on Thick Plate Part using Genetic Algorithm. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-12., 78 (01083). ISSN 2261-236X

Najiyah Safwa, Khashi’ie and Khairum, Hamzah and Iskandar, Waini and Nurul Amira, Zainal and Sayed Kushairi, Sayed Nordin and Abdul Rahman, Mohd Kasim and Ioan, Pop (2023) Response Surface Methodology of the Unsteady Axisymmetric Magnetic Hybrid Nanofluid Flow Subject to a Shrinking Disk. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 137-148. ISSN 2289-7895. (Published)

Najwa Wahida, Zainal Abidin and M. F. F., Ab Rashid and N. M. Zuki, N. M. (2018) Optimization of multi-holes drilling path using particle swarm optimization. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 101-107. ISBN 9789811087875

Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Juliawati, Alias and Nasrul Azuan, Alang (2021) Design and development of motorbike roof shield for delivery service. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Namdar, Abdoullah and Mehran, Karimpour-Fard and Filippo, Berto and Nurmunira, Muhammad (2023) Prediction of the displacement mechanism of the cracked soil using NXFEM and Artificial Neural Networks. Procedia Structural Integrity, 47. pp. 636-645. ISSN 2452-3216. (Published)

Nandiyanto, Asep Bayu Dani and Munawaroh, Heli Siti Halimatul and Kurniawan, Tedi and Mudzakir, Ahmad (2016) Influences of Temperature on the Conversion of Ammonium Tungstate Pentahydrate to Tungsten Oxide Particles with Controllable Sizes, Crystallinities, and Physical Properties. Indonesian Journal of Chemistry, 16 (2). pp. 124-129. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Nandiyanto, Asep Bayu Dani and Putra, Zulfan Adi and Andika, Riezqa and Muhammad Roil, Bilad and Kurniawan, Tedi and Zulhijah, Rizka and Hamidah, Ida (2017) Porous activated carbon particles from rice straw waste and their adsorption properties. Journal of Engineering Science and Technology, 12 (10). pp. 1-11. ISSN 1823-4690. (Published)

Naqib Hakim, Kamarudin and A. K., Prasada Rao and Azmir, Azhari (2016) CFD based erosion modelling of abrasive waterjet nozzle using discrete phase method. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Naqibah, Azman and Nik Hisyamudin, Muhd Nor and Mohd Fahrul, Hassan and Mohd Hafiz, Burhan and Siti Zarina, Mohd Muji and Fariza, Mohamad and Faiz, Mohd Turan and Abdul Rahman, Bahasa and Seiji, Yokoyama (2020) Industrial guideline for injection moulding: case of jaundice meter. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1). pp. 299-303. ISSN 2278-3091. (Published)

Nasir, Ahmad Fakhri Ab (2017) Vehicle locator system for multi-storage car park management. , [Research Report: Research Report] (Unpublished)

Nasita, Ibrahim (2006) Implementation of automation controller using electro-pneumatic & PLC for food processing. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nasrual Azuan, Alang and Nikbin, Kamran M. (2018) An analytical and numerical approach to multiscale ductility constraint based model to predict uniaxial/multiaxial creep rupture and cracking rates. International Journal of Mechanical Sciences, 135. pp. 342-352. ISSN 0020-7403. (Published)

Nasrual Azuan, Alang and Nur Azhani, Abd Razak and M. R., Zulfadli (2013) The Influence of Gouge Defects on Failure Pressure of Steel Pipes. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished)

Nasrul Azuan, Alang (2018) Characterization of creep deformation and rupture behaviour of P92 steel weldment at 600°C. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3976-3987. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nasrul Azuan, Alang (2021) Creep Failure - The Natures Insidious Plight. FTKMA Bulletin (2). p. 20. ISSN 2773-594X

Nasrul Azuan, Alang (2022) Roofed-Motorcycle How Relevant is the Concept for Malaysias Climate. FTKMA Bulletin, 3 . p. 27. ISSN 2773-594X

Nasrul Azuan, Alang and Nikbin, Kamran M. (2019) A new approach to predict creep rupture of Grade 92 steel under multiaxial stress states. International Journal of Mechanical Sciences, 163. pp. 1-2. ISSN 0020-7403. (Published)

Nasrul Azuan, Alang and Norhaida, Ab. Razak and Ahmad Syahrizan, Sulaiman (2012) Determination of burst pressure of API steel pipes using stress modified critical strain model. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012025). ISSN 1757-899X

Nasrul Hadi, Johari and Jegatis, Balaiyah and Zulkifli, Ahmad (2014) Effect of Chronic Obstructive Pulmonary Disease on Airflow Motion Using Computational Fluid Dynamics Analysis. In: International Conference on Computer, Communications, and Control Technology , 2-4 September 2014 , Langkawi, Kedah. pp. 249-254..

Nasrul Hadi, Johari and Kahar, Osman and Mohammed Rafiq, A. Kader (2013) The Effect of Tracheal Stenosis on Airflow in the Trachea and Main Bronchi:A Numerical Modelling Analysis. Advanced Science Letters, 19 (10). pp. 3041-3046. ISSN 1936-6612. (Published)

Nasrul Hadi, Johari and Hamady, Mohamad S. and Xu, Xiaoyun (2022) Fluid-structure interaction study of the effect of stent on local hemodynamics parameters at the stented carotid artery bifurcation. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 247-255. ISSN 2462-1943. (Published)

Nasrul Hadi, Johari and Kahar, Osman and W. M., Basri and Zamani, Ngali (2012) Effect of tracheal stenosis at different locations on airflow in the trachea and main bronchi. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1325-1332., 1440 (1325). ISSN 0094243X

Nasrul Hadi, Johari and Menichini, Claudia and Hamady, Mohamad and Xu, Xiao Y. (2019) Effects of stent design on LDL accumulation at the carotid artery bifurcation. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4.. (Unpublished)

Nasser, Abdullah and Kamal Zuhairi, Zamli and Alsewari, Abdulrahman A. and Rassem, Taha H. (2021) Intelligent interaction tests suite generator for iot testing. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Naveed, M. and Arslan, A. and Javed, H. M. A. and Manzoor, T. and Quazi, M. M. and Imran, T. and Zulfattah, Z. M. and Khurram, M. and Fattah, I. M. R. (2021) State-of-the-art and future perspectives of environmentally friendly machining using biodegradable cutting fluids. Energies, 14 (16). pp. 1-35. ISSN 1996-1073. (Published)

Navindran, Subramaniam (2010) Effect of exhaust temperature on the performance of a diesel engine with EGR. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nayak, S. K. and Mishra, P. C. and M. M., Noor (2019) Simultaneous reduction of nitric oxide and smoke opacity in TDI dual fuel engine fuelled with calophyllum-diesel blends and waste wood chip gas for modified inlet valve and injector nozzle geometry. Energy, 189 (16238). pp. 1-17. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Nayak, S. K. and Mishra, P. C. and M. M., Noor and Hagos, F. Y. and K., Kadirgama and R., Mamat (2019) The performance of turbocharged diesel engine with injected calophyllum inophyllum methyl ester blends and inducted babul wood gaseous fuels. Fuel, 257. pp. 1-16. ISSN 0016-2361. (Published)

Nayak, S. K. and Mishra, P. C. and Nanda, Sonil and Nayak, Biswajeet and M. M., Noor (2020) Opportunities for Biodiesel Compatibility as a Modern Combustion Engine Fuel. In: Biorefinery of Alternative Resources: Targeting Green Fuels and Platform Chemicals. Springer, Singapore, pp. 457-476. ISBN 978-981-15-1804-1

Nazani, Nazri and Shahrani, Anuar and F., Basrawi and Ahmmad Shukrie, Md Yudin and Siti, Aishah (2016) Estimation of Energy Potential and Power Generation from Tidal Basin in Coastal Area of Malaysia. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-8., 38. ISSN 2261-236X

Nazila, Ishak and Abid, Hussanan and Muhammad Khairul Anuar, Mohamed and Norhayati, Rosli and Mohd Zuki, Salleh (2018) Heat and mass transfer flow of a viscoelastic nanofluid over a stretching/shrinking sheet with slip condition. In: The International Conference on Science, Engineering & Technology 2018(I-SET 2018) , 2 - 3 May 2018 , Univ of Muhammadiyah, Banda Aceh, Indonesia. pp. 1-10.. (Unpublished)

Nazirul Izzat, Ibrahim (2010) Development of single cylinder engine test rig for small engine dyno. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nazrin, Mokhtar and Gebremariam, M.A. and Mohd Hafizi, Zohari and Azmir, Azhari (2018) Analysis of acoustic emission during abrasive waterjet machining of sheet metals. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981

Nazrith, Zulkafli (2012) Experimental and analytical evaluation of bending for aluminum. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nazrotul Afina, Nazri (2019) Dynamic damage assessment of resistance spot welding for dissimilar plates by using model updating approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazrul Idzham, Kasim and A. R., Razali and Mohd Azam, Musa (2014) Positional Accuracy Based on a Load Identification Optimization on a Linear Motor Sheet Forming Feeder. Applied Mechanics and Materials, 680. pp. 311-314. ISSN 1662-7482. (Published)

Nelfiyanti, . and N. M. Zuki, N. M. and M. F. F., Ab Rashid (2022) Analysis of measurement and calculation of MSD complaint of chassis assembly workers using OWAS, RULA and REBA method. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). 9681 -9692. ISSN 2180-1606. (Published)

Nelfiyanti, . and Nik Mohamed Zaki, Nik Mohd Nasir and Ab Rashid, Mohd Fadzil Faisae (2022) Integration of QRM and ergonomics in the design of a framework in identification complaints among automotive assembly line workers. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 38..

Nelfiyanti, N. and Nik Mohamed Zaki, Nik Mohd Nasir and M. F. F., Ab Rashid (2023) Integration of QRM and ergonomics in the design of a framework in identification complaints among automotive assembly line workers. Journal of Engineering and Technology (JET), 14 (1). pp. 11-28. ISSN 2180-3811. (Published)

Nelfiyanti, Nelfiyanti and Nik Mohd Zuki, Nik Mohamad and MFF, Ab. Rashid and Anwar Ilmar, Ramadhan (2022) Parameters of effects in decision making of automotive assembly line using the Analytical Hierarchy Process method. CIRP Journal of Manufacturing Science and Technology, 37. pp. 370-377. ISSN 1755-5817. (Published)

Nelfiyanti, Nelfiyanti and Nik Mohd Zuki, Nik Mohamed and M. F. F., Ab. Rashid (2021) Ergonomics study in Quick Response Manufacturing (QRM) automotive workstation environment to overcome employee complaints. In: Human-Centered Technology for a Better Tomorrow. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 681-693. ISBN 978-981-16-4115-2

Ng, Kai Bin (2009) The development of band-stop filter for vibration control of a flexible manipulator using PIC microcontroller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ng, Kok Ming (2007) Mobile robot : Transmitter module. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ng, Noveen Nico Alexandra and A. A. A., Ahmad Shamsuddin and M. M., Hasin and N. S., Mazlan and M. L., Mohd Isnin (2016) Design and Development of Ion Probe Testing on Four Stroke Engine Model. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-18..

Ng, Wei Keong (2013) Lubricant ester synthesis from rubber seeds waste using cockle shells as solid catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng, Weng Kai (2015) Mobile robot simulator with jmonkeyengine (java base programming). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ng, Weng Seng and Ahmad Shahrizan, Abdul Ghani (2018) Vision based smart sorting machine. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 13-25. ISBN 978-981-13-8323-6

Ng, X. H. and R. A., Bakar and Kadirgama, Kumaran and Sivaraos, . and D., Ramasamy and Mahendran, Samykano (2023) The performance of beta type stirling engine using different fuel. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 89-110.. ISSN 2195-4356 ISBN 978-981191456-0

Ngau, Kien Keong (2007) Design, analysis and fabrication of bottle neck elactrode. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ngu, Tai Tieng and Hagos, F. Y. and A. Rashid, A. Aziz and R., Mamat (2018) CFD modelling of combustion of CNG and hydrogen-rich syngas under a dual fueling strategy. In: 5th International Conference on Nanotechnology, Nanomaterials & Thin Films for Energy Applications , 18 - 20 Julai 2018 , University of Aveiro, Portugal. pp. 1-19.. (Unpublished)

Nickolas, N. and Moorthy, P. and A. N., Oumer and M., Ishak (2017) A Review on Improving Thermal-Hydraulic Performance of Finand- Tube Heat Exchangers. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012049). ISSN 1757-899X

Nida, Khan and Sudhakar, K. and R., Mamat (2021) Role of biofuels in energy transition, green economy and carbon neutrality. Sustainability (Switzerland), 13 (22). pp. 1-30. ISSN 2071-1050. (Published)

Nidzamuddeen, Ishak and Abdalla, Ahmed N. and Noraziah, Ahmad (2012) Sustainable Energy Efficiency Implementation in Building. In: International Conference On Green Technology & Ecosystems for Global Sustainable Development 2012(ICGTEC 2012) , 28-30 May 2012 , University of Tuzla, Tuzla, Bosnia & Herzegovina. .

Niellambare, N. and H. H., Mohamad and Erny Afiza, Alias and Nasrul Hadi, Johari (2022) Investigation on the effect of venturi geometry variation on microbubble generation. In: AIP Conference Proceedings. AIP Conference Proceedings; 2nd Energy Security and Chemical Engineering Congress, ESChE 2021 , 3 - 5 November 2021 , Gambang, Kuantan. pp. 1-10., 2610 (050009). ISSN 0094-243X ISBN 978-073544378-5

Nik Abdullah, Nik Mohamed and Singh, S.S.K. and S., Abdullah (2017) The Needs of Understanding Stochastic Fatigue Failure For The Automobile Crankshaft: A Review. Engineering Failure Analysis, 80. pp. 464-471. ISSN 1350-6307. (Published)

Nik Ahmad Fairuz, Nik Adlan (2011) Development hydrogen gas generator for duel fuel engine using capacitor water fuel cell method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Mohamad Anis, Nik Haron (2008) Design of a microcontroller-based passive standby uninterruptible power suply (UPS). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nik Mohamed, Nik Mohd Zuki and Noor, M. M. and Rose, Ahmad Nasser Mohd and Razali, Noraini Mohd and Daud, Rosdi and Shalahim, N. S M and Ahmad, Syarifah Nur Aqida Syed (2008) Development of laser cutting and engraving machine utilising PC-NC controller. , [Research Report: Research Report] (Unpublished)

Nik Mohd Azrin, Nik Aziz and Daing Mohamad Nafiz, Daing Idris and Saiful Anwar, Che Ghani and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and Muhammad Hanif, Abd. Rasid (2022) Stability analysis of multirotor drone with water jet payload. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 77..

Nik Mohd Haikal, Mohamed Hassan and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan and Idris, Mat Sahat and Mohd Nadzeri, Omar and Zulkifli, Ahmad@Manap (2023) Experimental Investigation of Mechanical Properties of Sepak Takraw Ball Based on Different Ball Orientation. In: 1st International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 November - 15 November 2022 , Kuala Lumpur, Malaysia. pp. 203-211. (293639). ISBN 978-981-99-0297-2

Nik Mohd Qamarul Shafiq, Nik Ahmad Kamil (2010) Performance evaluation of solar flat plate collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Muhamad Firdaus, Nik Salahuddin (2013) Modal analysis on cnc milling cutting tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Muhammad Farhan Hakim, Nik Badrul Alam and Ku Muhammad Naim, Ku Khalif and Nor Izzati, Jaini (2023) Application of intuitionistic z-numbers in supplier selection. Intelligent Automation and Soft Computing, 35 (1). pp. 47-61. ISSN 1079-8587. (Published)

Nik Nor Amalina, Mustafa (2014) The investigation on effect on terrain in wind related disaster. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nik Nurul Husna, Muhmed Razali and A. R., Yusoff (2018) Optimisation of hybrid energy harvesting using finite element method based on vibration excitation. Progress in Industrial Ecology, an International Journal, 12 (3). pp. 284-296. ISSN 1476-8917 (Print); 1478-8764 (Online). (Published)

Nik Rosli, Abdullah and Nafis Syabil, Shahruddin and Aman Mohd. Ihsan, Mamat and Salmiah, Kasolang and Aminuddin, Zulkifli and R., Mamat (2013) Effects of air intake pressure to the fuel economy and exhaust emissions on a small SI engine. Procedia Engineering, 68. pp. 278-284. ISSN 1877-7058. (Published)

Nik Rosli, Abdullah and Nafis Syabil, Shahruddin and R., Mamat and Aman Mohd, Ihsan Mamat and Aminuddin, Zulkifli (2014) Effects of Air Intake Pressure to the Engine Performance, Fuel Economy and Exhaust Emissions on a Small Gasoline Engine. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 949-958. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nik Rosli, Abdullah and R., Mamat and Wyszynski, Miroslaw L. and Tsolakis, Anthanasios and Xu, Hongming (2013) Effects of Pilot Injection Timing and EGR on a Modern V6 Common Rail Direct Injection Diesel Engine. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Nik Ruqiyah, Nik Hassan and Farah Amira, Mohd Ghazali and Abdul Aziz, Jaafar and Noor Mazni, Ismail (2016) Preparation of polypropylene thermoplastic container via thermoforming process. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nina Iwani, A. Zailaini and Siti Zubaidah, Ismail (2019) Product - Service System Inventory Control For Malaysian Palm Oil Agribusiness. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 9-16. ISSN 2636-9575. (Published)

Nishyanthi, Puspakaran (2014) Thermodynamic study on polyphenol thermal degradation from orthosiphon stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nolia, Harudin and Faizir, Ramlie and Wan Zuki Azman, Wan Muhamad and Muhtazaruddin, M. N. and Khairur Rijal, Jamaludin and Mohd Yazid, Abu and Zulkifli Marlah, Marlan (2021) Binary bitwise artificial bee colony as feature selection optimization approach within taguchi's t-method. Mathematical Problems in Engineering, 2021. pp. 1-10. ISSN 1024-123X. (Published)

Noor, M. M. and Rahman, M. M. and Sani, M. S.M. and Julie Juliewatty, Mohammed and Nik Mohamed, Nik Mohd Zuki and Rose, Ahmad Nasser Mohd (2008) Numerical study on fatigue life of spot welded for automotive components. , [Research Report: Research Report] (Unpublished)

Noor Afeeza, Mohamad Sazali (2009) Experimental study of natural convection heat transfer in a vertical internally finned tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Aifadilah, Junoh (2012) The effect of number of coils on electromagnetic for energy harvester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Aishah, Kamarudin and Mohamad Razali, Abdullah and Eswaramoorthi, Vijayamurugan and Ahmad Bisyri Husin Musawi, Maliki and Aina Munirah, Ab Rasid and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu (2022) A cluster analysis of identifying team and individual sports athlete based on anthropometric, health and skill related components. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 561-570., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Noor Am Zura, Abdullah (2017) Dynamic model updating of body-in-white structure using sensitivity analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Effendy, Mat Rejab (2009) Preliminary design of portable pineapple peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Hazira, Mohamad Haidzir (2010) Experimental analysis of gyroscopic effect on vehicle vibration and accident potential. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Hazreen, Sutomoh (2009) The development of embedded band-stop filter for vibration control of a flexible manipulator. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Noor Hizam Dzulkharnain, Mohd Hassan (2010) A numerical study on the effect of gasoline-hydrogen fuel blend on engine power and torque. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Juraizah, Mohd Jinal (2009) Rope climbing robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Noor Zakiah, Md Zaid (2018) Mechanical performance of lightweight sandwich structures based on trapezoidal corrugated-cores. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Noor Zalika, Kornain (2013) Model and control on the ascending process of rotating wing helicopter. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Noorhidayad, Mohd Noh (2012) Design and fabrication of laboratory printer table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Aisah, Khalid and Jeefferie, Abd Razak and Hazman, Hasib and Mohd Muzafar, Ismail and Noraiham, Mohamad and Ramli, Junid and Poppy, Puspitasari (2020) A short review on polyaniline (PANI) based nanocomposites for various applications: enhancing the electrical conductivity. In: IOP Conference Series: Materials Science and Engineering; 2020 International Conference on Sustainable Materials, ICoSM 2020 , 3 September 2020 , Pahang, Virtual, Malaysia. pp. 1-8., 957 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nor Athira, Jamaluddin and Norfazillah, Talib and Amiril, S. A.S. (2021) Performance comparative of modified jatropha based nanofluids in orthogonal cutting process. Evergreen, 8 (2). pp. 461-468. ISSN 2189-0420. (Published)

Nor Atiqah, Zolpakar and Normah, Mohd Ghazali (2021) Development of stack component for thermoacoustic refrigerator using 3d printer. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nor Azhar, Ahmad and Fauziah, Zainuddin and Roslina, Abd Hamid and Rahmah, Mokhtar (2019) Indoor air quality sensors data mapped to students behavior in classroom through production rules technique. In: IEEE Symposium On Computer Applications & Industrial Electronics (ISCAIE 2019) , 27 - 28 April 2019 , Kota Kinabalu, Sabah. pp. 1-6.. (Unpublished)

Nor Azinee, Said (2008) Effect of nitriding on fatigue life of the cylinder block for two-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Azlina, Ab. Aziz and Zuwairie, Ibrahim and Kamarulzaman, Ab Aziz and Nor Hidayati, Abdul Aziz (2019) Simulated Kalman Filter optimization algorithm for maximization of wireless sensor networks coverage. In: International Conference on Computer and Information Sciences, ICCIS 2019 , 3 - 4 April 2019 , Jouf University, Aljouf, Kingdom of Saudi Arabia. pp. 1-5.. ISBN 978-153868125-1

Nor Azmi, Johari and Juliawati, Alias and Aliaa, Zanurin and Nurul Shuhada, Mohamed and Nasrul Azuan, Alang and Mohd Zamzuri, Mohd Ghani (2021) Anti-corrosive coatings of magnesium : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1842-1848., 48 (6). ISSN 2214-7853

Nor Azwadi, Che Sidik and Isa Muhammad, Adamu and Muhammad Mahmud, Jamil and Kefayati, G. H. R. and R., Mamat and G., Najafi (2016) Recent Progress on Hybrid Nanofluids In Heat Transfer Applications: A Comprehensive Review. International Communications in Heat and Mass Transfer, 78. pp. 68-79. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat (2017) Recent Advancement of Nanofluids in Engine Cooling System. Renewable and Sustainable Energy Reviews, 75. pp. 137-144. ISSN 1364-0321. (Published)

Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat (2015) A Review on the Application of Nanofluids in Vehicle Engine Cooling System. International Communications in Heat and Mass Transfer, 68. pp. 85-90. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and Syahrullail, Samion and Mohamad Nor, Musa and R., Mamat (2016) Latest Development on Computational Approaches for Nanofluid Flow Modeling: Navier–Stokes Based Multiphase Models. International Communications in Heat and Mass Transfer, 74. pp. 114-124. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and R., Mamat (2015) Recent Progress on Lattice Boltzmann Simulation of Nanofluids: A review. International Communications in Heat and Mass Transfer, 66. pp. 11-22. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and Syahrullail, Samion and Mohamad Nor, Musa and Mahmud Jamil, Muhammad and Adamu Isa, Muhammad and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat (2016) The Significant Effect of Turbulence Characteristics on Heat Transfer Enhancement Using Nanofluids: A Comprehensive Review. International Communications in Heat and Mass Transfer, 72. pp. 39-47. ISSN 0735-1933. (Published)

Nor Azzah, Abu Azmi (2010) Automated guided conveyor (AGC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor F., Yah and A. N., Oumer and Mat S., Idris (2017) Small Scale Hydro-Power as a Source of Renewable Energy in Malaysia: A Review. Renewable and Sustainable Energy Reviews, 72. pp. 228-239. ISSN 1364-0321. (Published)

Nor Faezah, Hamzah (2007) Two dimensional modelling for catalytic combustion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Hanisah, Husain and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal analysis of 6061 wrought aluminium alloy using cooling curve analysis-computer aided (CCA-CA) method. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-11., 788 (012018). ISSN 1757-8981

Nor Hidayati, Abdul Aziz (2019) Simulated Kalman Filter algorithms for solving optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Imrah, Yusoff and L. H., Sulaiman (2023) Influence of clad layer thickness of aluminium alloy by friction surface cladding process. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 17-22. ISSN 2636-9575. (Published)

Nor Komariah, Hasfa (2008) Prediction of chatter in CNC machining based on dynamic cutting force for ball end milling. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Mazlee, Norazmi (2009) Temperature-control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nor Nabilah, Che Mansor (2013) Fluid structural interface analysis of force excitation on straight pipeline. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nor Nashriq Azizi, Abd Shukor (2010) Evaluate fin performance of a space radiator to remove heat generated for outer space application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Nashriq Azizi, Abd Shukor (2007) Modelling and fabrication of intake valve for Perodua Kancil engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Sakinah , Abdul Shukor (2012) Automated car driver assisted : road lane detection and tracking using vision sensor. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nor Salwana, Mohammad Idris (2017) Pensyarah UMP kongsi kepakaran dalam pengaturcaraan dan pembinaan lego Mindstrom. UMP News . (Unpublished)

Nor Salwana, Mohammad Idris (2019) Penyelidik UMP hasilkan alat penyedut madu kelulut lebih berkualiti. UMP News . (Unpublished)

Nor Shuhada, Ibrahim and Nafrizuan, Mat Yahya and Saiful Bahri, Mohamed (2022) Metaheuristic nature-inspired algorithms for reservoir optimization operation: A systematic literature review. Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). pp. 1050-1059. ISSN 2502-4752. (Published)

Nor Syahirah, Abdul Wahid and Mohd Saberi, Mohamad and Abdul Hakim, Mohamed Salleh and Safaai, Deris and Chan, Weng Howe and Omatu, Sigeru and Corchado, Juan Manuel and Muhammad Farhan, Sjaugi and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2016) A Hybrid of Harmony Search and Minimization of Metabolic Adjustment for Optimization of Succinic Acid Production. In: 10th International Conference on Practical Applications of Computational Biology & Bioinformatics. Advances in Intelligent Systems and Computing, 477 (Pt. IV). Springer, Switzerland, pp. 183-191. ISBN 978-3-319-40125-6 (print); 978-3-319-40126-3 (online)

Nor Syazwani, Hamsan (2013) Design and development of tire nut removal. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nor Syukriah, Khalid and M. F., Hassan and Mohd Hafizi, Zohari and Muhammad Rais, Rahim (2021) A strain-wavelength modelling of low-frequency cantilever fibre Bragg grating accelerometer. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. pp. 1-13. ISSN 0954-4062. (Published)

Nor Syukriah, Khlaid and Mohd Firdaus, Hassan and Rahim, Muhammad Rais (2022) A modal-based approach for modelling the cantilever FBG accelerometer with the presence of tip mass and its sensitivity analysis. Optik, 271 (170209). pp. 1-16. ISSN 1618-1336. (Published)

Noraini, Mohd Razali and Iskandar, Ismed (2014) Multi-Mode Failure Models for Attribute Test Data in Reliability Systems, a Bayesian Analysis Approach Using Multi-Nomial Distribution Model. Advanced Materials Research, 903. pp. 419-424. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Noraishah, Mohamad Noor and Muhammad Nashrur Faizzi, Abdul Razak and A. R., Yusoff (2020) Finite Element Analysis of Baseplate for Failure Estimation in Light Railway Transit Fastening Systems. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 505-511.. ISBN 978-981-15-0950-6

Norasmiza, Mohd and Zubair, Khalil (2020) Eco design for rooftop in urban housing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 531-536.. ISBN 978-981-15-0950-6

Norasyikin, Ismail (2015) Syngas production from microwave plasma gasification of oil palm char. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norasyikin, Julis (2008) Implementation of PID controller on revolute control of universal strech and bending machine (USBM) simplified model. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Norazianti, Kaharudin (2008) LCD graphic monitoring for energy saving control application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norazlianie, Sazali (2012) Experimental & numerical study on sheet metal lateral bending with fixed and pinned ends. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norazlianie, Sazali and A. S., Jamaludin and Mohd Rusllim, Mohamed and W. N., W. Salleh (2019) Degradation and stability of polymer: A brief review. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished)

Norazlianie, Sazali and Asogan, Arjun (2021) Modified ghee/clarified butter composition for food technology. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Norazlianie, Sazali and Mohd Syafiq, Yusoff and Ihsan Naiman, Ibrahim and Haziqatulhanis, Ibrahim and Mohd Nizar, Mhd Razali and Wan Norharyati, Wan Salleh (2019) Dip-coating methods for carbon membrane fabrication: Effects of coating-carbonization-cycles on Hydrogen separation prepared from BTDA-TDI/MDI (P-84) polyimide blends with Nanocrystalline cellulose (NCC). In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 384-389.. ISBN 978-981-15-0950-6

Norazlianie, Sazali and R., Mamat and J. P., Siregar and T., Gunawan and W. N. W., Salleh and N. A. H. M., Nordin (2020) PI/NCC carbon membrane : effect of additives loading towards hydrogen separation. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 736 (022002). ISSN 1757-8981 (Print), 1757-899X (Online)

Norazlianie, Sazali and Ummu Kulthum, Jamaludin and W. N., W. Salleh (2019) Brief review on polymeric materials concerning degradable polymers. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Norazlianie, Sazali and W. N., W. Salleh and A. F., Ismail and Ahmad Shahir, Jamaludin and M. N., M. Razali and Y., Iwamoto (2019) A comprehensive review and perception of carbon molecular sieve membranes for hydrogen production and purification. In: Energy Security And Chemical Engineering Congress (ESCHE 2019) , 17-19 July 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-2.. (Unpublished)

Norazlianie, Sazali and W. N. W., Salleh and N. H., Ismail and K., Kadirgama and M. H. D., Othman and Z., Harun (2020) Advanced in carbon membrane by relating to coating-carbonization-cycles for oxygen performance. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 736 (022008). ISSN 1757-8981 (Print), 1757-899X (Online)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail (2023) Advanced polymeric membrane technology for gas separation processes. Penerbit UMPSA, Pahang. ISBN 978-967-2831-94-5

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and K., Kadirgama and Mohamad Shahrizan, Moslan and Faten Ermala, Che Othman and Nor Hafiza, Ismail and Samykano, Mahendran and Zawati, Harun (2018) Effect of heating rates on the microstructure and gas permeation properties of carbon membranes. Malaysian Journal of Fundamental and Applied Sciences, 14 (3). pp. 378-381. ISSN 2289-5981 (Print); 2289-599x (Online). (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and Mimi Sakinah, Abdul Munaim (2021) Reformed polyimide/nanocrytalline cellulose for gas separation. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ihsan Naiman, Ibrahim and Haziqatulhanis, Ibrahim and Mohd Syafiq, Sharip (2019) The Influence of Thickness on Low Carbon Steel in Rapid Cooling Process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). pp. 175-182. ISSN 2289-7879. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and K., Kadirgama (2018) P84 Co-polyimide/Nanocrystalline Cellulose (NCC)-based tubular carbon membrane: effect of drying times for carbon dioxide separation at elevated carbonization temperature. Journal of Applied Membrane Science & Technology, 22 (1). pp. 49-54. ISSN 2600-9226. (Published)

Norazlina, H. and Kamal, Yusoh (2021) Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites. Polymer Bulletin, 78 (12). 6911 -6933. ISSN 0170-0839(Print); 1436-2449(Online). (Published)

Norazman, Daud (2010) Formulation of multipurpose grease using waste of palm oil manufacturing. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norazmira Wati, Awang (2021) Study oil thermal-physical properties for nanocellulose nanoparticles for sae40 engine oil for tribological behaviour. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraznafulsima, Khamshah (2013) Fuzzy temperature compensation scheme for hot wire mass airflow sensor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazreen, Samsuri (2012) Fabricate and investigate the performance of the flow-through solar evacuated tube using water-based nanofluids. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norfadilah, Che Yusoff (2012) Automation of 6 wheels robot (HOBO L3A1 robot). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norfadilah, Zulkefli (2012) Direction and speed control of DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norfadzilah, Jusoh (2016) Analysis of the effect and responsiveness of physiology factors on thermal comfort in an air-conditioned environment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rosli).

Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali (2015) Computational Analysis of Thermal Building in a No-uniform Thermal Environment. Energy Procedia, 68. pp. 438-445. ISSN 1876-6102 . (Published)

Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali and Shamshir, Ali and Farrah Wahida, Mustafar (2015) The Impact of Thermal History on Buildings Occupants’ Thermal Assessments in Air-Conditioned Office Buildings. Journal of Advanced & Applied Sciences (JAAS), 3 (5). pp. 159-168. ISSN 2289-6260. (Published)

Norfarahanim, Muhamad@Ramli (2007) Design and fabrication of ceiling fan blades cleaner. Faculty of Mechanical Engineering, University Malaysia Pahang.

Norfariza, Ab. Wahab (2015) Modeling of cutting process and flow stress under high strain rate. PhD thesis, University of Agriculture and Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Norfatihah, Ismail and Iqbal, AKM Asif (2020) Microstructure and mechanical properties of biodegradable Mg-SiO2 nanocomposite. Russian Journal of Non-Ferrous Metals. ISSN 1934-970X. (Unpublished) (Unpublished)

Norfazilah, Abdul Halim and Nor Zalina, Kasim and Aliff Radzuan, Mohamad Radzi and Faiz, Mohd Turan (2021) A systematic literature review of multi-criteria analysis model methods on sustainability weighting for ethanol plant. ASM Science Journal, 16. pp. 1-13. ISSN 1823-6782. (Published)

Norfazillah, Talib and Ainaa Mardhiah, Sabri and Nor Athira, Jamaluddin and Mohamad Hafiz Akmal, Suhimi and Amiril Sahab, Abdul Sani (2022) Effect of Vegetable-Based Nanofluid Enriched with Nanoparticles as Metalworking Fluids During Orthogonal Cutting Process. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore, pp. 90-93. ISBN 978-981-16-9949-8 (Printed); 978-981-16-9949-8(Online)

Norfazillah, Talib and Amiril Sahab, Abdul Sani and Erween, Abd Rahim and S. A., Che Ghani and Syahrullail, Samion (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19. pp. 98-106. ISSN 2289-7232. (Published)

Norfazillah, Talib and Nur Fatin Amira, Mohd Sukor and Ainaa Mardhiah, Sabri and Haslina, Abdullah and Amiril Sahab, Abdul Sani (2022) Experimental study on physical properties of modified jatropha oilbased nanofluids for machining purposes. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1831-1835., 48 (176050). ISSN 2214-7853

NorfidaErwani, Mohd Shafie (2005) Network alarm monitoring system-temperature in server room. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Norhafana, M. and M. M., Noor and A. A., Hairuddin and S., Harikrishnan and K., Kadirgama and D., Ramasamy (2020) The effects of nano-additives on exhaust emissions and toxicity on mankind. Materials Today: Proceedings, 22 (Part 3). pp. 1181-1185. ISSN 2214-7853. (Published)

Norhafana, M. and M. M., Noor and A. Aziz, Hairuddin (2020) Concentration measurement on preparation of blending SiO2 nano biodiesel. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-6., 736 (022114). ISSN 1757-899X

Norhafana, M. and M. M., Noor and A. Aziz, Hairuddin and Hagos, F. Y. and S. I., Ayob and K., Kadirgama and D., Ramasamy (2019) An experimental study of the performance and emission characteristics of a compression ignition (CI) engine fueled with palm oil based biodiesel. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020036). ISBN 978-0-7354-1787-8

Norhafana, M. and M. M., Noor and Hagos, F. Y. and Hairuddin, A. A. (2020) Diesel and various blending nanoparticles based diesel, fuel properties study. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-9., 788 (012061). ISSN 1757-899X

Norhafana, M. and M. M., Noor and M. Sharif, Pshtiwan and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2018) An update on nano additive in diesel fuel. In: International Postgraduate Conference On Mechanical Engineering , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-51.. (Unpublished)

Norhafana, M. and M. M., Noor and Pshtiwan, M. Sharif and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2019) A review of the performance and emissions of nano additives in diesel fuelled compression ignition-engines. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012035). ISSN 1757-899X

Norhafizah Suhada, Abdullah and Siti Humairah, Kamarul Bahrain and Nur Aini Sabrin, Manssor and Anwar, P. P. Abdul Majeed and Jamaluddin, Mahmud (2020) Compressive and viscoelastic behavior of arenga pinnata-silicone biocomposite. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 83-87., 41 (168124). ISSN 2214-7853

Norhafzan, B. and Aqida, S. N. and Khairil, C. M. (2021) Optimization of laser melting parameter to enhanced surface properties in hot press forming die. IOP Conference Series: Materials Science and Engineering, 1078 (012020). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Norhafzan, B. and Khairil, C. M. and Aqida, S. N. (2021) Laser cladding process to enhanced surface properties of hot press forming die: A review. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-8., 1078 (012037). ISSN 1757-8981 (Print), 1757-899X (Online)

Norhafzan, Bariman (2020) Laser surface melting to enhance surface properties in hot press forming die. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Norhafzan, Bariman and S. N., Aqida and Chikarakara, E. and Brabazon, D. (2016) Surface modification of AISI H13 tool steel by laser cladding with NiTi powder. Applied Physics A, 122 (384). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Norhafzan, Bariman and S. N., Aqida and Fazliana, Fauzun (2017) Laser Melting of High Thermal Conductivity Steel (HTCS) Surface. Materials Science Forum, 890. pp. 380-383. ISSN 1662-9752. (Published)

Norhaida, Ab Razak and Davies, Catrin Mair (2022) Numerical simulation of creep notched bar of P91 steel. Frattura ed Integrit� Strutturale, 16 (62). pp. 261-270. ISSN 1971-8993. (Published)

Norhaida, Ab Razak and Md Mustafizur, Rahman and Kadirgama, Kumaran (2014) Experimental study on surface integrity in end milling of hastelloy c-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9 (1). pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Norhaida, Ab Razak and Rahman, Md Mustafizur and Kadirgama, Kumaran (2013) Experiment study on surface integrity in end milling of hastelloy C-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Norhaida, Ab. Razak and Ahmad Syahrizan, Sulaiman and Nasrul Azuan, Alang (2012) Interaction effect of pressurized lamination pipe by using 2D finite element analysis. In: IOP Conference Series: Materials Science and Engineering; 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012027). ISSN 1757-899X

Norhaida, Ab. Razak and Davies, C. M. and Nikbin, K. M. (2016) Creep-fatigue crack growth behaviour of P91 steels. In: Procedia Structural Integrity; 21st European Conference on Fracture, ECF21 , 20 - 24 June 2016 , Catania, Italy. pp. 855-862., 2. ISSN 2452-3216

Norhaida, Ab. Razak and Davies, Catrin Mair and Nikbin, Kamran M. (2018) Testing and assessment of cracking in P91 steels under creep-fatigue loading conditions. Engineering Failure Analysis, 84. pp. 320-330. ISSN 1350-6307. (Published)

Norhaida, Ab. Razak and Nasrul Azuan, Alang and Khairidz Azuwar, Safie and Ahmad Syahrizan, Sulaiman (2012) Finite element analysis on burst pressure of defective steel pipes. In: 19th European Conference on Fracture (ECF19) , 26-31 August 2012 , Kazan, Russia. pp. 1-9.. (Unpublished)

Norhaida, Ab. Razak and Nasrul Azuan, Alang and M. A, Murad (2013) Burst pressure prediction of multiple cracks in pipelines. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Norhaida, Mohamad Noor (2008) Optimization drilling process of glass fiber reinforced plastics. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Norhayati, Mat Noor (2006) Development of pick and place system using IRB 1400 robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norizwan, Juraimi and Arman, Shah and Mas Ayu, Hassan and Mazlan, Mohamed and Kenzhaliyev, Bagdaulet and Mohammad, Khairudin and R., Daud and Abdelkarim, Hassan Abdelwahab (2020) Performance enhancement of energy saving and machining characteristic in electrical discharge machining on magnesium alloy: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 73 (2). pp. 29-45. ISSN 2289-7879. (Published)

Norkhairani, Abdul Rawi and Abd. Rasid, Mamat and Maizan, Mat Amin and Muhamad, Mat Noor (2023) Aplikasi perbincangan maya sebagai alat kelangsungan pekerjaan semasa PKP. In: Pandemik Covid-19 dan perubahan landskap kehidupan masyarakat. Penerbit UMP, pp. 13-27. ISBN 978-967-2831-80-8

Norkhizan, A. M. and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi (2023) Experimental investigation of a diesel engine using waste plastic oil blends. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 133-143.. ISSN 2195-4356 ISBN 978-981191456-0

Norliana, Bakar and Siew, Choo Chin (2021) Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties. In: Key Engineering Materials . pp. 284-293., 879. ISSN 1662-9795

Norlida, Jamil (2015) Electromagnetic force generation for dynamic modal testing applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norlida, Jamil and A. R., Yusoff (2019) Effect of Machining Process Parameters on Acceleration Signal in Determining Surface Quality of Milling Process at Ductile Iron. In: Joint Conference of 4th International Manufacturing Engineering Conference (iMEC) & 5th Asia-Pacific Conference on Manufacturing System (APCOMS) , 21-22 August 2019 , Putrajaya, Malaysia. pp. 1-6.. (Unpublished)

Norlida, Jamil and A. R., Yusoff and M. M., Hatifi (2012) Literature Review Of Electromagnetic Actuator Force Generation For Dynamic Modal Testing Applications. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 311-319. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Norlida, Jamil and A. R., Yusoff and Muhammad Hatifi, Mansor (2013) Experimental Study of the Static Modal Analysis on Milling Machine Tool. In: International Manufacturing Engineering Conference (IMEC 2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-6.. (Unpublished)

Noroozi, Siamak and Abdul Ghaffar, Abdul Rahman and Vinney, John and Ong, Zhi Chao and Khoo, Shin Yee (2013) Simulation of Performance Enhancement of Bi-Lateral Lower-Limb Amputees Through Impulse Synchronisation with Self Selected Running Step Frequency. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished)

Noroozi, Siamak and A. G. A., Rahman and Eng, H. C. and Dupac, M. and Ong, Zhi Chao and Khoo, Shin Yee and Kong, K. K. (2019) A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes. Nondestructive Testing and Evaluation, 34 (4). pp. 413-428. ISSN 1058-9759. (Published)

Norsharimie, Adam and Mohd, Aiman and Wan Mohd, Nafis and Addie Irawan, Hashim and Mohamad, Muaz and Mohamad, Hafiz and A. R., Razali and Sheikh Norhasmadi, Sheikh Ali (2016) Omnidirectional Configuration and Control Approach on Mini Heavy Loaded Forklift Autonomous Guided Vehicle. In: MATEC Web of Conferences: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01077). ISSN 2261-236X

Norsharimie, Mat Adam and Addie Irawan, Hashim and Fawzan Khaizuran, Faudzi (2018) Impedance control on rack steering vehicle for inertia shaping on cornering track. International Journal of Dynamics and Control. pp. 1-9. ISSN 2195-268X (Print) 2195-2698 (Online). (Published)

Norsuhailizah, Sazali and Zawati, Harun and Tijani, Abdullahi and Faiz Hafeez, Azhar and Norazlianie, Sazali (2019) Revolution of Malaysia’s Kaolin to Metakaolin towards various application: A mini review. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 114-119. ISSN 2636-9575. (Published)

Norsuhailizah, Sazali and Zawati, Harun and Tijjani, Abdullahi and Faiz Hafeez, Azhar and Azlinnorazia, Ahmad and Nurul Izwanie, Rasli and Norazlianie, Sazali (2021) Potential of Transforming Sodalite from Synthesis Kaolin with a Mild Condition of the Hydrothermal Method. Biointerface Research In Applied Chemistry, 12 (6). pp. 7376-7393. ISSN 2069-5837. (Published)

Norsuhailizah, Sazali and Zawati, Harun and Tijjani, Abdullahi and Noor Hasliza, Kamarudin and Norazlianie, Sazali and Mohd Riduan, Jamalludin and Siti Khadijah, Hubadillah and Siti Salwa, Alias (2022) The Route of Hydrothermal Synthesis Zeolite‑A from the Low‑Grade Perak kaolin, Malaysia. Silicon. pp. 1-17. ISSN 1876-9918. (Published)

Norsyamsul Syazwan, Mohd Nuji (2012) Analysis of diesel spray characteristic at high pressure injection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norsyamsul Syazwan, Mohd Nuji (2007) Design and fabrication of pneumatic walking robot. Faculty of Mechanical Engineering, University Malaysia Pahang.

Norsyeeda, Ab Alim (2012) Study of machinability on drilling austenite stainless steel 316 L1 by solid cabide tool. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norul Amierah, Nor Zamani (2016) Mechanical properties and characterizations of polypropylene based composite. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum-Graphite Composite. Russian Journal of Non-Ferrous Metals, 60 (3). pp. 274-281. ISSN 1934-970X (Online). (Published)

Norul Hasanah, Ahmad Marzuki (2018) Studies of stability in rolling sphere robot. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Norzikri, Sairi (2010) RFID based security system for vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nugroho, Agus and Rizalman, Mamat and Bo, Zhang and W. H., Azmi and Alenezi, Raslan and Najafi, Gholamhassan (2022) An overview of vapor compression refrigeration system performance enhancement mechanism by utilizing nanolubricants. Journal of Thermal Analysis and Calorimetry, 147. pp. 9139-9161. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Nugroho, Agus and Rizalman, Mamat and Bo, Zhang and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Yusaf, Talal (2023) OFAT Adoption on FAl2O3-POE Nanolubricant Absorbance Ratio Optimization Based on Spectrophotometric Method. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress (ESCHE 2021) , 3-5 November 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 165-177.. ISBN 978-981-19-4425-3

Nugroho, Agus and Rizalman, Mamat and Bo, Zhang and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Yusaf, Talal (2023) Rheological Characteristics and Optimization of Novel TiO2-POE Nanolubricant Using Response Surface Method (RSM) for Air Conditioning System Compressor Application. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress (ESCHE 2021) , 3-5 November 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 133-146..

Nugroho, Agus and Rizalman, Mamat and Bo, Zhang and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Yusaf, Talal (2023) Surface Modification for Dispersion Stability of Novel FAl2O3-POE Nanolubricant Using Functional SiO2. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress (ESCHE 2021) , 3-5 November 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 179-192.. ISBN 978-981-19-4425-3

Nugroho, Agus and Rizalman, Mamat and Bo, Zhang and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Yusaf, Talal and Khoerunnisa, Fitri (2023) Absorbance Ratio Optimization as a Function of TiO2-POE Nanolubricant Spectrophotometric Wavelength Using the Quadratic Design on One Factor at a Time. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress (ESCHE 2021) , 3-5 November 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 193-204.. ISBN 978-981-19-4425-3

Nugroho, Agus and Rizalman, Mamat and Z., Bo and Wan Azmi, Wan Hamzah and Muhamad Faisal, Ghazali and T. F., Yusaf (2022) Central composite design adoption for assessing the tio quality using response surface method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 46..

Nur A. A., Rahman and Mohd Aminudin, Jamlos and Mohd Faizal, Jamlos and Soh, Ping J. and Norfatihah, Bahari and Hossain, Toufiq M. (2020) Compact bidirectional circularly polarized dedicated short range communication antenna for on‐board unit vehicle‐to‐everything applications. International Journal of RF and Microwave Computer-Aided Engineering, 30 (5). pp. 1-2. ISSN 1096-4290. (Published)

Nur Adila , Mamat (2012) Speed detection of moving vehicle using normal camera. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nur Afikah, Khairi Rosli and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nurul Natasha, Mohd Sukri and Nur Hazreen, Mohd Hasni (2021) Comparative study between TPU flexible and soft epoxy resin materials on development of heart model for CardioVASS device. In: Intelligent Manufacturing and Mechatronics Proceedings of SympoSIMM 2020. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 913-931. ISBN 978-981-16-0865-0 (Print); 978-981-16-0866-7 (Online)

Nur Afiq, Abu Bakar (2007) Industrial vibration and noise analysis of conventional drilling machine on different type of materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Aidah Nabihah, Dandang (2019) Microstructures and properties of CoCrMo alloy by metal injection moulding process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Sharuzi, Wan Harun).

Nur Aidah Nabihah, Dandang and W. S., Wan Harun and Nur Zalikha, Khalil and Muhammad Hussain, Ismail and Rosdi, Ibrahim (2017) Physical Properties and Microstructure Study of 316L SS Fabricated by Metal Injection Moulding Process. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100016). ISBN 978-0-7354-1589-8

Nur Ain Afiqah, Abdul Latiff (2012) Analysis of diesel particulate matter of single cylinder diesel engine running on tire derivated fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Ainaa Adhreena, Muhamad Shukri (2024) UMPSA satu-satunya universiti di Malaysia miliki Anechoic Chamber untuk pengujian kenderaan. UMPSA News .

Nur Ainaa Adhreena, Muhamad Shukri and Mohd Hafizi, Zohari and Epin, Vorathin (2022) Water temperature monitoring by using fiber bragg grating sensor. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 56..

Nur Aini Safiah, Abdullah and Fatin Farisha, Abdullah and Amirul Hakim, Sufian and Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2021) Effect of degradation by temperature onto nitrile rubber elastomer mechanical properties. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1941-1946., 48 (6). ISSN 2214-7853

Nur Aisyah Syafinaz, Suarin (2020) Extended bat algorithm for PID controller tuning of wheeled mobile robot and swarm robotics target searching strategy. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Alif, Ismail (2014) The effect of wind load on roof truss system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Alya Syamimie, Muzaidi and Mohd Amiruddin, Fikri and Khairul Nizar Syazwan, Wan Salihin Wong and Azfi Zaidi, Mohammad Sof and R., Mamat and Norfatihah, Mohd Adenam and Muhamad Yuzaini Azrai, Mat Yunin and Hasyiya Karimah, Adli (2021) Heat absorption properties of CuO/TiO2/SiO2 trihybrid nanofluids and its potential future direction towards solar thermal applications. Arabian Journal of Chemistry, 14 (4). pp. 1-12. ISSN 1878-5352. (Published)

Nur Anis Nabila, Mokhtar and Zahiruddeen Salam, Zahari and Dayangku Noorfazidah, Awang Sh'ri (2022) Enhanced mechanical and corrosion behavior of ultrafine- grained aluminium alloy coated with ZrO2 using sol-gel- assisted dip coating technique. In: International Conference On Bioengineering And Technology (IConBET2021) , 24 - 25 May 2021 , Kelantan, Malaysia. pp. 1-8., 2454 (060029). ISBN 978-0-7354-4193-4

Nur Aqilah, Othman and Hamzah, Ahmad (2017) Estimation behavior of intermittent measurement in EKF-based SLAM. In: IEEE Symposium on Industrial Electronics & Applications (ISIEA 2014) , 28 September - 1 October 2014 , Kota Kinabalu, Sabah. pp. 189-194. (17209416). ISSN 2472-7660 ISBN 978-1-4799-5590-9

Nur Ashikin, Usri (2010) Experimental study of heat transfer coefficient for nanofluid with inserted tape. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Ashikin, Usri (2016) Investigation of forced convection heat transfer for Al2O3 nanofluids in different base mixture. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Asyran Wanie, Baharom (2013) Experimental assessment of stamping parameters in a non-isothermal sheet metal forming technology. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Athira, Jamaluddin and Norfazillah, Talib and Amiril Sahab, Abdul Sani (2020) Tribological Analyses of Modified Jatropha Oil with hBN and Graphene Nanoparticles as An Alternative Lubricant for Machining Process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (2). pp. 1-10. ISSN 2289-7879. (Published)

Nur Atiqah, Ramlan (2010) Design and development of a manual breast pump : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Atiqah, Ramlan and Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Nur Fauziah, Jaharudin and R., Mamat (2015) Evaluation of Diesel Engine Performance and Exhaust Emission Characteristics Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 425-429. ISSN 1662-7482. (Published)

Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah and Nur Fauziah, Jaharudin and Abdul Adam, Abdullah and R., Mamat (2014) Analysis of Diesel Engine Performance Fueled with Waste Cooking Oil. Applied Mechanics and Materials, 465-46. pp. 418-422. ISSN 1662-7482. (Published)

Nur Azhani, Abd Razak and Asmara, Y. P. and Mohamad Khairuazlan, Kamaruzaman (2014) Influences of H2SO4 and NaCl Concentrations on Stress Corrosion Cracking of AISI 304 Stainless Steel. Advanced Materials Research, 893. pp. 410-414. ISSN 1662-8985. (Published)

Nur Azhani, Abd Razak and Shing Shian, Ng (2014) Investigation of Effects of Mig Welding on Corrosion Behaviour of AISI 1010 Carbon Steel. Journal of Mechanical Engineering and Sciences (JMES) , 75. pp. 1168-1178. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nur Azhani, Abd Razak and Wai, Loon Ng and Juliawati, Alias (2013) Effects of Mig Welding to Corrosion Behaviour of Carbon Steel. Applied Mechanics and Materials, 315. pp. 914-918. ISSN 1662-7482. (Published)

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Maarof, Rashidi and Naher, Sumsun (2021) An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology (114). pp. 1233-1240. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2018) Thermal analysis of aluminium 7075 prior to semisolid metal processing. In: The 4th International Conference On Green Design And Manufacture , 29 April - 30 April 2018 , Ho Chi Minh, Vietnam. p. 1., 2030 (1).

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal profile and microstructure of wrought aluminium 7075 for semisolid metal processing. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7842 -7850. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Nur Azhani, Abd Razak and Juliawati, Alias and L. H., Shah and M., Ishak (2012) Effect of Heat Treatment on Corrosion Behaviour of Welded AA6061 Aluminium Alloy in Seawater. In: 15th International Conference on Advances in Materials & Processing Technologies , 23-26 September 2012 , Wollongong, Australia. .

Nur Azhani, Abdul Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2017) Investigation of pouring temperature and holding time for semisolid metal feedstock production. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-9., 257 (1). ISSN 17578981

Nur Azieta, Mohamad Aseri and Mohd Arfian, Ismail and Abdul Sahli, Fakharudin and Ashraf Osman, Ibrahim and Shahreen, Kasim and Noor Hidayah, Zakaria and Sutikno, Tole (2022) Comparison of meta-heuristic algorithms for fuzzy modelling of covid-19 illness’ severity classification. IAES International Journal of Artificial Intelligence, 11 (1). pp. 50-64. ISSN 2089-4872. (Published)

Nur Azirah, Abdul Rahim (2013) Simulation of micro hydro power based on river configuration at river upstream. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Azmina, Othman (2009) Parameter identification of a coupled tank liquid evel system via particle swarm optimization. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Diyana Wahida, Adam (2012) A simplification of reading thermodynamic properties using microsoft excel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Elya Haniza, Zamiruddin and Nurrina, Rosli and Amiril Sahab, Abdul Sani (2021) Experimental Study of Lubricant Oil Film Behavior on Al6061 under MQL Milling Process. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2021) , 20 September 2021 , Universiti Malaysia Pahang (Virtual). pp. 1-9.. (Unpublished)

Nur Fahriza, Mohd Ali and Ahmad Farhan, Mohd Sadullah and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman and Choong, Chun Sern and Musa, Rabiu Muazu (2022) Forecasting daily travel mode choice of kuantan travellers by means of machine learning models. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 979-987., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nur Fahriza, Mohd. Ali and Ahmad Farhan, Mohd. Sadullah and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman and Muhammad Aizzat, Zakaria and Ahmad Fakhri, Ab. Nasir (2021) Travel mode choice modeling: Predictive efficacy between machine learning models and discrete choice model. Open Transportation Journal, 15 (1). pp. 241-255. ISSN 1874-4478. (Published)

Nur Fakhriah, Mohd Noordin (2020) Study of different fillers on aluminium alloys 6061 and 7075 by MIG welding. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fakhriah, Mohd Noordin and M., Ishak and L. H., Shah (2016) Prediction and Optimization of Process Parameters on Metal Inert Gas of Dissimilar Aluminium Alloy AA6061-T6 and AA7075-T6 using Response Surface Method Analysis. Key Engineering Materials, 701. pp. 143-147. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Nur Farida, Ismail (2007) Analysis of gauge glass failure possibility for boiler. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Farizah Diana, Abdul Razak (2020) Vibration analysis and noise mapping of automotive radiator system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Farizah Diana, Abdul Razak and M. S. M., Sani and Azmi, W. H. (2020) Heat transfer augmentation in heat exchanger by using nanofluids and vibration excitation - A review. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). pp. 7719-7733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nur Farziana, Husein and Nurul Hidayah, Razak (2021) Tool deterioration of 316 stainless steel in dry down-milling using carbide insert. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 911-915., 48 (4). ISSN 2214-7853

Nur Fatihah, Mohd Roslan and Ahmmad Shukrie, Md Yudin and Muhammad Afiq, Sumono and Muhammad Faris, Mohamad Pozi and Muhammad Aidil Safuan, Othaman (2022) Drying performance of piper nigrum in a swirling fluidized bed dryer: An experimental study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (1). pp. 148-166. ISSN 2289-7879. (Published)

Nur Fauziah, Jaharudin (2015) Analysis of particulate matter emission in diesel engine operated with waste cooking oil biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Nur Fauziah, Jaharudin and Abdul Adam, Abdullah and Ahmad Fitri, Yusop and R., Mamat and Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah (2014) Study on Particulate Matter (PM) Emissions of Diesel Engine Using Palm Oil Methyl Ester. Applied Mechanics and Materials, 465 (466). pp. 433-437. ISSN 1662-7482. (Published)

Nur Fauziah, Jaharudin and Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah and Abdul Adam, Abdullah and R., Mamat (2015) Study on Particulate Matter of Diesel Engine Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 420-424. ISSN 1662-7482. (Published)

Nur Hairunnisa, Kamarudin (2019) Modelling and optimisation of assembly line balancing problem with resource constraint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Nur Hanisah, Azman and Oktaviandri, Muchamad and Muhammad Rizal, Ramedan (2022) SCADA system for industrial manipulator PLC trainer. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 375-385., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Nur Hartini, Mohd Hatta (2022) Dr. Amiril Sahab hasilkan 5 produk daripada biji buah pokok Tamanu. UMP News .

Nur Hartini, Mohd Hatta (2022) Dr. Khairul Anuar hasilkan CLINKROOF, sistem bumbung hijau mampan berasaskan sisa bahan kelapa sawit. UMP News .

Nur Hartini, Mohd Hatta (2023) Dr. Mohd Azraai helps farmers improve accuracy in watering and plant growth systems. UMPSA News .

Nur Hartini, Mohd Hatta (2023) Ir. Ts. Dr. Juliawati produces microcapsules composed of honey and linseed oil to enhance metal corrosion resistance. UMPSA News .

Nur Hartini, Mohd Hatta (2023) Ts. Dr. Nasrul Hadi produces Protective Bandana (Pro-B) reducing the risk of injury to takraw players. UMPSA News .

Nur Hazwani, Mat Razali and Shaharin Anwar, Sulaiman and Mohamad Nazmi, Zaidi Moni and F., Basrawi (2017) Pre-treatment of oil palm frond biomass via extensive high temperature drying for gasification process. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2017 (SES 2017) , 26-27 September 2017 , Perak, Malaysia. pp. 1-5., 131 (01007). ISSN 2261-236X (Unpublished)

Nur Iffah, Mohamed Azmi and Nafrizuan, Mat Yahya and Ho, Jun Fu and Wan Azhar, Wan Yusoff (2019) Optimization of the PID-PD parameters of the overhead crane control system by using PSO algorithm. In: MATEC Web of Conferences: Engineering Application of Artificial Intelligence Conference (EAAIC 2018) , 3-5 December 2018 , Kota Kinabalu, Sabah, Malaysia. pp. 1-8., 255 (04001). ISSN 2261-236X

Nur Iffah, Mohamed Azmi (2014) Optimization of PID parameters for hydraulic positioning system utilizing variable weight Grey-Taguchi and particle swarm optimization. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Izana, Hafiza (2009) The development of high performance band-stop filter for anti-sway control of a gantry crane system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Izzati Khoirunnisa, Ismail and Abdul Sani, A. S. and Rosli, Nurrina (2020) Study of oil flow rates effects on lubricant oil behaviour during minimum quantity lubrication milling process. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1635-1639., 46 (169722). ISSN 2214-7853

Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli and Amagai, Kenji (2020) Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 584-589.. ISBN 978-981-15-0950-6

Nur Khadijah, Mazlan and Nazrin, Mokhtar and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Prediction of abrasive waterjet machining of sheet metals using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 43-50., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Nur Khaleeda, Romli (2018) Quasi-static and low-velocity impact response on fibre metal laminate. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Khaleeda, Romli and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and M. F., Rani and W. S., Wan Harun and Salwani, Mohd Salleh and Mohamad Nazirul Mubin, Merzuki (2017) The Behavior Of Aluminium Carbon/Epoxy Fibre Metal Laminate Under Quasi-Static Loading. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-12., 257 (012046). ISSN 1757-8981 (Print); 1757-899X (Online)

Nur Khuzairy, Jamaludin (2008) Solat tracking system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Liyana, Abdul Rahim (2013) Solar collector storage tank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Munirah, Mohd Din (2008) Graphical user interface (GUI) development for energy saving control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Naajihah, Ab Rahman and Nafrizuan, Mat Yahya (2022) System identification for a mathematical model of DC motor with PI controller. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 73..

Nur Naajihah, Ab Rahman and Nafrizuan, Mat Yahya and Mohd Haziq, Na'im Amin and Nur Iffah, Mohamed Azmi (2023) Application of modified adaptive bats sonar algorithm with doppler effect and levy flight (MABSA-DELF) to optimize mechanical engineering problems. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (2). pp. 32-40. ISSN 2637-0883. (Published)

Nur Najwa, K. A. and Hilmi, M. and Aqida, S.N. and Izwan, Ismail (2024) Hydrophobicity of laser-textured soda-lime glass. Journal of Physics: Conference Series, 2688 (1). pp. 1-11. ISSN 1742-6596. (Published)

Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan (2021) Sustainable Finished Product Optimization on Quality Response and Attitudinal Parameters. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 261-268.. ISBN 978-981-15-7309-5

Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan and Anis Izzati, Md Yusoff and Hui Xin, Wong (2022) Optimising casting film Parameters for LPDE material assessment. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 67-74.. ISBN 978-981-19-2890-1

Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan and Anis Izzati, Md Yusoff and Weng Yee, Yuen (2022) Performance of assessment model for Injection moulding parameters. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 59-65.. ISBN 978-981-19-2890-1

Nur Suraini, Hashim (2012) Design of mini CNC machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Syafikah, Punueh and Mohd Yazid, Abu and N.H, Aris and M. A. M., Jamil and S. N. A. M., Zaini and W.Z.A.W., Muhamad and F., Ramlie and N., Harudin and E., Sari (2023) Application of Mahalanobis-Taguchi system in Rainfall Distribution. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (2). pp. 1-8. ISSN 2636-9575. (Published)

Nur Syafiqah, Mohd Nawawi (2011) Study on spray nozzle of diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Syafiqah, Nor Sofian and Luqman Hakim, Ahmad Shah (2022) Comparative study of submerged friction stir welding of aluminium alloy using different cooling medium. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. 97 -104.. ISBN 978-1-83953-782-0

Nur Syahidah, Nordin and Abdul Rahman, Mohd Kasim and Masyfu’ah, Mokhtar and Iskandar, Waini (2023) The mixed of hybrid nanofluid GO-MoS2/engine oil over a shrinking sheet with mass flux effect: Reiner-Philippoff model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 108 (2). pp. 122-139. ISSN 2289-7879. (Published)

Nur Syahilia Syahira, Safie and Muhamad Nasir, Murad and Lih, Tan Chye and Azwan Iskandar, Azmi and Wan Azmi, Wan Hamzah and Mohd, Danish (2022) Roles of eco-friendly non-edible vegetable oils in drilling inconel 718 through minimum quantity lubrication. Lubricants, 10 (211). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Nur Syawanie, Manam and W. S., Wan Harun and Mohd Halim Irwan, Ibrahim and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Sintering temperature effects on the properties of stainless steel 316L compact fabricated by metal injection moulding. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 37-52. ISSN 1368-2148. (Published)

Nur Syawanie, Manam and Wan Sharuzi, Wan Harun and Mohd Halim Irwan, Ibrahim (2016) Experimental Study of Solvent Debinding on Water Soluble PEG Behavior for Water Atomised SS 316L Compact. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 187-192..

Nur Zalikha, Khalil and Mohamed Feisal, Johanne and M., Ishak (2019) Influence of Al2O3 nanoreinforcement on the adhesion and thermomechanical properties for epoxy adhesive. Composites Part B: Engineering, 172. pp. 9-15. ISSN 1359-8368. (Published)

Nur Zalikha, Khalil and Vajpai, Sanjay Kumar and Ota, Mie and Ameyama, Kei (2016) Application of Al-Si Semi-Solid Reaction for Fabricating Harmonic Structured Al Based Alloy. Materials Transactions, 57 (9). pp. 1433-1439. ISSN 1345-9678. (Published)

Nur'Atikah , Ab Rahman (2013) Analysis of the wind effect on the patio cover (awning) structure in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nuraihan, Ismail and Mohd Zamani, Ahmad and Mohd Nasir, Hussain and Amalina Nisa, Ariffin and Ismail, Zainol (2019) Modelling of water supply cost for offshore platforms. International Journal of Scientific and Technology Research, 8 (12). pp. 58-64. ISSN 2277-8616. (Published)

Nurain, Abdul Mutalib and Izwan, Ismail and Soffarina M., Soffie and Syarifah Nur Aqida, Syed Ahmad (2019) Rheological Properties of Magnetorheological Polishing Fluid for Micro Mould Polishing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 490-496.. ISBN 978-981-15-0950-6

Nurain, Rozy and Norazlianie, Sazali and Saiful Anwar, Che Ghani and Maurice, Kettner (2021) Innovative hydrocarbon sensor for real drive emission testing: optimization of the gas inlet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 1-10. ISSN 2289-7879. (Published)

Nurainaa, Elias and Nafrizuan, Mat Yahya (2022) Fuzzy logic controller optimized by MABSA for DC servo motor on physical experiment. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 561-570., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nurainaa, Elias and Nafrizuan, Mat Yahya (2018) Simulation study for controlling direct current motor position utilising fuzzy logic controller. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5989-6000. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nuraini, Aziz and S. N., Aqida (2013) Optimization of Quenching Process In Hot Press Forming of 22mnb5 Steel For High Strength Properties. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Nuraini, Ahmad Ariff Shah (2009) Energy management system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nuraini, Aziz and S. N., Aqida (2014) Hot Press Forming of 22MnB5 Steel Using Full Factorial Design of Experiment (DOE). Advanced Materials Research, 1024. pp. 243-246. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuraini, Aziz and S. N., Aqida (2013) Optimization of quenching process in hot press forming of 22MnB5 steel for high strength properties for publication in. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-4 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-6., 50 (1). ISSN 1757-899X

Nuraini, Aziz and S. N., Aqida and I., Ismail (2017) Microstructural analysis of hot press formed 22MnB5 steel. In: 20th International ESAFORM Conference on Material Forming (ESAFORM 2017) , 26-28 April 2017 , University Dublin, Ireland. , 1896 (1). ISSN 0094243X ISBN 978-073541580-5

Nurazima, Ismail and Mohd Hafizi, Zohari and Lim, Kok-Sing and Harith, Ahmad (2022) Lamb Wave Actuation Techniques for SHM System- A review. In: Technological Advancement in Instrumentation & Human Engineering. Lecture Notes in Electrical Engineering, 882 . Springer, Singapore, pp. 677-685. ISBN 978-981-19-1576-5 (Printed); 978-981-19-1577-2 (Online)

Nurazima, Ismail and Z. M., Hafizi and C. K. E., Nizwan and S., Ali (2021) Interactions of Lamb waves with defects in a thin metallic plate using the finite element method. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 183-193.. ISBN 978-981-15-7309-5

Nurazima, Ismail and Z. M., Hafizi and Che Ku Eddy Nizwan, Che Ku Husin and S., Ali (2019) Simulation of lamb wave interactions with defects in a thin plate. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019 , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Nurazima, Ismail and Z. M., Hafizi and Ooi, Cheong-Weng and Muhammad Khairol Annuar, Zaini and Che Ku Eddy Nizwan, Che Ku Husin and Lim, Kok-Sing and Harith, Ahmad (2020) Fiber bragg grating-based fabry-perot interferometer sensor for damage detection on thin aluminum plate. IEEE Sensors Journal, 20 (7). pp. 3564-3571. ISSN 1530-437X. (Published)

Nurhamim, Ahamad and Normy Norfiza, A. Razak and Ummu Kulthum, Jamaludin and Fatanah, Suhaimi and Christopher, Pretty and Geoffrey, Chase and Azrina, Ralib and Basri, Mohd Noor (2017) Efficacy and Safety of SPRINT and STAR Protocol on Malaysian Critically-ill Patients. In: IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES) , 4-8 December 2016 , Kuala Lumpur. pp. 370-375.. ISBN 9781467377911

Nurhanis Sofiah, Abd Ghafar (2017) Synthesis, characterization and modelling of nickel nanowires synthesized via template-assisted electrodeposition. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurhanis Sofiah, Abd Ghafar and Kananathan, J. and Samykano, Mahendran and Ulakanathan, S. and S. A., Che Ghani and W. S., Wan Harun and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Electrochemical Deposited Nickel Nanowires: Influence of Deposition Bath Temperature on the Morphology and Physical Properties. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012032). ISSN 1757-899X

Nurhanis Sofiah, Abd Ghafar and Mahendran, Samykano and S., Shahabuddin and K., Kadirgama and A. K., Pandey (2021) An experimental study on characterization and properties of eco‑friendly nanolubricant containing polyaniline (PANI) nanotubes blended in RBD palm olein oil. Journal of Thermal Analysis and Calorimetry. pp. 1-15. ISSN 1388-6150 (print); 1588-2926 (online). (In Press / Online First) (In Press / Online First)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Kadirgama, Kumaran and Koh, Siaw Paw and Tiong, Sieh Kieh and Pandey, Adarsh Kumar and Yaw, Chong Tak and Natarajan, Sendhil Kumar (2023) Harnessing nature’s ingenuity: A comprehensive exploration of nanocellulose from production to cutting-edge applications in engineering and sciences. Polymers, 15 (3044). pp. 1-42. ISSN 2073-4360. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Rajamony, Reji Kumar and Pandey, Adarsh Kumar and Nur Fatin, Sulaiman and Zatil Amali, Che Ramli and Tiong, Sieh Kiong and Koh, Siaw Paw (2024) Potential coolants for fuel cell application: Multi-objective optimization of thermophysical properties and PPF calculation of hybrid palm oil nanofluids. Case Studies in Thermal Engineering, 53 (103931). pp. 1-17. ISSN 2214-157X. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and K., Kadirgama and Shahabuddin, Syed and Pandey, A. K. (2021) A comparative experimental study on the physical behavior of mono and hybrid RBD palm olein based nanofluids using CuO nanoparticles and PANI nanofibers. International Communications in Heat and Mass Transfer, 120 (105006). pp. 1-13. ISSN 0735-1933. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and K., Kadirgama and Shahabuddin, Syed and Pandey, Adarsh (2020) An experimental study on characterization and properties of eco-friendly nanolubricant containing polyaniline (PANI) nanotubes blended in RBD palm olein oil. Journal of Thermal Analysis and Calorimetry. pp. 1-15. ISSN 1588-2926. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and Shahabuddin, Syed and Pandey, Adarsh Kumar and Kadirgama, Kumaran and Said, Zafar and Sudhakar, Kumarasamy (2022) Copper (II) oxide nanoparticles as additives in RBD palm olein : Experimental analysis and mathematical modelling. Journal of Molecular Liquids, 363 (119892). ISSN 0167-7322. (Published)

Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Samykano, Mahendran and K., Kadirgama and Hussein, A. M. and Ngui, Wai Keng (2020) Template Synthesis of Ni Nanowires: Characterization and Modelling. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 76-90. ISSN 2289-7879. (Published)

Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Wan Sharuzi, Wan Harun and Kananathan, J. and Samykano, Mahendran and Nurul Akmal, Che Lah and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of boric acid (H3BO3) concentration on the physical properties of electrochemical deposited nickel (Ni) nanowires. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and SpaKuantan, Pahang; Malaysia. pp. 1-7., 257 (1). ISSN 17578981

Nurhazwani, Abu Bakar and Mohd Arif, Zulkarnain and Wan Anuar, Wan Hassan and Ramli, Junid and Jeefferie, Abd Razak and Mohd Muzafar, Ismail (2020) The effect of graphite flakes (GFs) and hybrid graphene nanoplatelets (GNPs) particles to the mechanical properties of epoxy composites. In: IOP Conference Series: Materials Science and Engineering, International Conference on Sustainable Materials (ICoSM 2020) , 29 - 30 March 2020 , Pahang, Malaysia. pp. 1-9., 957 (012033). ISSN 1757-899X

Nurhidayah, Abdull and Azian, Hariri and N. Azreen, P. and A. M., Leman and M. Z. M., Yusof (2014) Determination of Customer Requirement for Welding Fumes Index Development in Automotive Industries by using Quality Function Deployment Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1609-1619. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Mohammad Asaduzzaman, Chowdhury and A. K. M., Asif Iqbal and Noor Mazni, Ismail and Fatchurrohman, Nanang and Chan, Shin Yi (2020) Influence of glass fiber content on the flexural properties of polyamide 6-polypropylene blend composites. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 466-471.. ISBN 978-981-15-0950-6

Nurizzatul Athika, Rahmat and Hagishima, Aya and Ikegaya, Naoki and Tanimoto, Jun (2016) An Experimental Study on Aerodynamic Interaction Between a Boundary Layer Generated by a Smooth And Rough Wall and a Wake Behind a Spire. Engineering Sciences Reports, 37 (2). pp. 19-26. ISSN 0388-1717. (Published)

Nurizzatul Atikha, Rahmat and Hagishima, Aya and Ikegaya, Naoki and Tanimoto, Jun (2018) Experimental study on effect of spires on the lateral nonuniformity of mean flow in a wind tunnel. Evergreen, 5 (1). pp. 1-15. ISSN 2189-0420. (Published)

Nurizzatul Atikha, Rahmat and Kamil Khalili, Haji Abdullah and Khairun Adhani, Khairunizam (2023) Natural Ventilation in Traditional Malay House A Study of Flow Pattern by an Enhanced Smoke Wire Technique. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer, pp. 289-303. ISBN 978-981-19-6687-3

Nurizzatul Atikha, Rahmat and M. R., Ramli and M. H. C., Hassan and K. K. H., Abdullah and K. A., Khairunizam (2023) Enhanced smoke wire technique with control dripping valve in a small scaled quasi-atmospheric boundary layer wind tunnel. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 611 -627.. ISSN 2195-4356 ISBN 978-981191456-0

Nurizzatul Atikha, Rahmat and Mujahid Husaimi, Che Hassan and Mohammad Rozaki, Ramli (2021) Enhanced smoke wire technique in small scaled quasi-atmospheric boundary layer wind tunnel. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nurliyana, Mohd Johari (2008) Computer based instrumentation system for pressure measurement in matlab application. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nurrina, Rosli (2019) iMEC-APCOMS 2019 the best platform to exhibit industry and manufacturing engineering research product. UMP News . (Unpublished)

Nurrina, Rosli and Amagai, Kenji (2014) Measurement of Liquid Sheet using Laser Tagging Method by Photochromic Dye. Experiments in Fluids, 55 (12). pp. 1-15. ISSN 07234864. (Published)

Nurrina, Rosli and Amagai, Kenji (2015) Study of Liquid Film Flow Structure on Inclined Wall Using Photochromic Dye Marking Method. Journal of JSEM, 15 (S. I.). s21-s25. ISSN 1346-4930. (Published)

Nurrina, Rosli and Nur Izzati Khoirunnisa, Ismail and Amiril Sahab, Abdul Sani and Afifah Nailah, Muhamad (2023) Investigation of Lubricant Oil Film Thickness on Workpiece under Minimum Quantity Lubrication Milling Process. Tribology Online, 18 (6). pp. 365-372. ISSN 1881-218X(Printed) 1881-2198 (Online). (Published)

Nurshahiera, Mohidin (2013) Experimental investigation the effect of nanofluid on the pressure drop across the solar collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nursya Mimie Ayuny, Ismail and Mohamad Zairi, Baharom and Zulkifli, Ahmad@Manap and Mohd Hasnun Ariff, Hassan and Juffrizal, Karjanto and Zulhaidi, Mohd Jawi and Khairil Anwar, Abu Kassim (2024) A Review on the Pedal Error Cases Among Car Drivers in Malaysia. In: Proceedings of the 2nd Human Engineering Symposium. HUMENS 2023. 2nd Human Symposium (HUMENS) 2023 , 14 February 2023 , Library, Universiti Malaysia Pahang, Pekan. pp. 313-325.. ISBN 978-981-99-6890-9

Nurul, Izzati and Sheikh Ahmad, Zaki and Rijal, Hom Bahadur and Rey, Jorge Alfredo Ardila and Hagishima, Aya and Nurizzatul Atikha, Rahmat (2023) Investigation of thermal adaptation and development of an adaptive model under various cooling temperature settings for students’ activity rooms in a university building in malaysia. Buildings, 13 (36). pp. 1-25. ISSN 2075-5309. (Published)

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Baarath, Kunjunni and Abdul Majeed, Anwar P. P. and Ahmad Fakhri, Ab Nasir and Papaioannou, Georgios (2022) Normal forces effects of a two in-wheel electric vehicle towards the human body. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 693-701., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and K., Baarath and Anwar, P. P. Abdul Majeed and Umar Zakir, Abdul Hamid (2019) The vibration effects of a two in-wheel electric vehicle towards the human brain. In: 5th International Conference on Recent Advances in Automotive Engineering , 20 - 22 Ogos 2019 , Bangi Resort Hotel Malaysia. pp. 1-6.. (Unpublished)

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Kunjunni, Baarath and Anwar, P. P. Abdul Majeed (2020) The normal vehicle forces effects of a two in-wheel electric vehicle towards the human brain on different road profile maneuver. SN Applied Sciences, 2 (223). pp. 1-8. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)

Nurul Ain, Rosli and Aina Najwa, Azmi and Muhammad Ariff Hakimi, Mohd Kamal and Mohamad Rusydi, Mohamad Yasin (2021) Development of semi-automated guided vehicle for fertigation agriculture. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nurul Ain Nabihah, Abd Rahman (2017) Experimental investigation of the flexure impact properties of glass fiber reinforced polymer composites. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Aiyshah, Mazlan and Wira Jazair, Yahya and Ahmad Muhsin, Ithnin and A. K., Hasannuddin and Nur Atiqah, Ramlan and Sugeng, Dhani Avianto and A. R., Muhammad Adib and Koga, Tsuyoshi and R., Mamat and Nor Azwadi, Che Sidik (2018) Effects of different water percentages in non-surfactant emulsion fuel on performance and exhaust emissions of a light-duty truck. Journal of Cleaner Production, 179. pp. 559-566. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Nurul Akmal, Che Lah and Murthy, Puhanes and Mohd Nashrul, Mohd Zubir (2022) The physical and optical investigations of the tannic acid functionalised Cu‑based oxide nanostructures. Scientific Reports, 12 (1). pp. 1-20. ISSN 2045-2322. (Published)

Nurul Akmal, Che Lah and Puhanes, Murthy and Mohd Nashrul, Mohd Zubir (2022) The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures. Scientific Reports, 12 (9909). pp. 1-20. ISSN 2045-2322. (Published)

Nurul Amira, Nor Azli (2016) Study the influence of end mill tool geometries toward machining performances. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Aqilah, Herman and Roshahliza, M. Ramli and Mohd Azrul Hisham, Mohd Adib and Mirta, Widia (2019) Development of Robotic Rover: A review. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Ergonomics & 2nd International Conference on Industrial Engineering , 27-28 August 2019 , Kuala Terengganu, Terengganu, Malaysia. pp. 1-9., 697 (012034). ISSN 1757-8981

Nurul Atiqah Syazwani, Kamarudin (2012) Landmark detection for vision based of autonomous guided vehicle. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurul Azwan, Adnan (2009) Material selection in mechanical design of car bumper. EngD thesis, University Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul A’in, Nadzri and M., Ishak and Mohd Mawardi, Saari and Aiman, Mohd Halil (2018) Development of eddy current testing system for welding inspection. In: 9th IEEE Control And System Graduate Research Colloquium (ICSGRC 2018) , 3-4 August 2018 , Shah Alam, Selangor. pp. 94-98.. ISBN 978-1-5386-6321-9

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and M., Ishak and Tsukada, Keiji (2021) Anisotropy magnetoresistance differential probe for characterization of sub-millimeter surface defects on galvanized steel plate. Measurement and Control, 2021. pp. 1-13. ISSN 0020-2940. (Published)

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi Putera, Zaini and Zulkifly, Ab Aziz and Nur Huda, Ramlan and Aiman, Mohd Halil (2020) Development of ect probe for back side crack evaluation. In: 11th IEEE Control and System Graduate Research Colloquium, ICSGRC 2020 , 8 August 2020 , Shah Alam. pp. 5-9. (9232475). ISBN 978-172815313-1

Nurul Fatiehah, Adnan (2016) Leak detection in gas pipeline based on time-frequency analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Fairusham, Ghazali).

Nurul Fatimah, Abdullah and Abbas, A. Wahab and Mohd Azri Hizami, Rasid (2019) Study of temperature rise in small brushed DC motor components under different speed. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012098). ISSN 1757-8981 (Print); 1757-899X (Online)

Nurul Hidayah, Abdul Samat (2010) Study of ground source heat pump as cooling system for local applications. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Hidayah, Ghazali and Rodziah, Nazlan and Siti Norain, Abdul Mubin (2021) Waste-to-wealth : From printer toner waste into valuable magnetic materials. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nurul Hidayah, Othman (2018) Effect of shoulder to pin diameter ratio on mechanical and microstructural properties of friction stir welded magnesium alloy AZ31B. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hidayah, Othman and L. H., Shah and M., Ishak (2015) Mechanical and Microstructural Characterization of Single and Double Pass Aluminum AA6061 Friction Stir Weld Joints. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Nurul Hidayah, Othman and N., Udin and M., Ishak and L. H., Shah (2016) Effect of Taper Pin Ratio on Microstructure and Mechanical Property of Friction Stir Welded AZ31 Magnesium Alloy. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (5). pp. 586-589. ISSN 1307-6892. (Published)

Nurul Hidayah, Othman and Norsyahfiana, Abdul Razak and L. H., Shah and M., Ishak (2016) Effect of Taper Pin Ratio on AA7075 Aluminium Alloy Friction Stir Welding. Key Engineering Materials, 701. pp. 154-158. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Nurul Hidayah, Razak (2012) Machining characteristics of hastelloy c-2000 in end milling using artificial intelligence approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Nurul Hidayah, Razak (2017) Modes and progression of tool deterioration and their effects on cutting force during end milling of 718plus Ni-based superalloy using cemented WC-Co tools. PhD thesis, Auckland University of Technology (Contributors, Thesis advisor: Zhan, Chen).

Nurul Hidayah, Razak and M. M., Rahman and K., Kadirgama (2012) Response surface design model to predict surface roughness when machining hastelloy C-2000 using uncoated carbide insert. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012022). ISSN 1757-899X

Nurul Huda, Azizan (2014) Failure of roof truss due to extreme wind in Malaysia : a study on consultant perspective. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Huda, Baso (2012) Design and development a small stirling engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Husna, Zakaria and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2017) Lean Manufacturing Implementation in Reducing Waste for Electronic Assembly Line. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01048). ISSN 2261-236X

Nurul Izzah, Ab Rahim (2020) Crash performance of polyurethane foam-filled aluminium column. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Salleh, Salwani).

Nurul Izzah, Ab Rahim and Salwani, Mohd Salleh and Mohd Shahril, M. (2018) Crushing Behaviour of Filled Tubes Under Static and Dynamic Loading Conditions: A Review. International Journal of Engineering & Technology, 7 (4.22). pp. 6-11. ISSN 2227-524X. (Published)

Nurul Izzati, Pandak Jabo (2008) Speed control of DC motor using PID controller implementation with visual basic. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Izzati, Yusop (2012) Experimental and simulation study of wind turbine grid connected. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Jannah, Baharuddin (2022) Study on die shoulder patterning method (DSPM) onto minimizing springback of u-ending. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Rosli, Abdul Manaf).

Nurul Jannah, Baharuddin and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2021) Experimental study on die shoulder patterning method (DSPM) to reduce springback of U-bending hat-shape part (in Press). In: 12th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2021) , 16-18 November 2021 , Melaka, Malaysia. pp. 1-3.. (Unpublished)

Nurul Jannah, Baharuddin and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2021) Study of springback behavior on u-bending part using die shoulder patterning method (DSPM). In: International Conference on Manufacturing Engineering and Technology (ICONMET 2021) , 14-15 July 2021 , Langkawi (Virtual Mode). pp. 1-7.. (Unpublished)

Nurul Kamariah, Md Saiful Islam (2020) Effect of selective laser melting process parameters on properties of 316L stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and Nur Zalikha, Khalil and F., Ahmad and M. H., Ismail and S., Sharif (2017) Effect of Heat Treatment on Mechanical Properties and Microstructure of Selective Laser Melting 316L Stainless Steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012021). ISSN 1757-899X

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and S. A., Che Ghani and Mohd Asnawi, Omar and Mohd Hazlen, Ramli and Muhammad Hussain, Ismail (2017) Physical Properties and Microstructure Study of Stainless Steel 316L Alloy Fabricated by Selective Laser Melting. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100015). ISBN 978-0-7354-1589

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and S. A., Che Ghani and Z., Ghazalli and Dayangku Noorfazidah, Awang Sh'ri and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat (2017) Manufacture by Selective Laser Melting & Physical Behaviour of Commercial 316L Stainless Steel. In: iMEDITEC 2017 Proceeding International Medical Device and Technology Conference , 6-7 September 2017 , Johor Bahru, Malaysia. pp. 87-89.. ISBN 978-967-0194-93-6

Nurul M., Suhaimi and Zhang, Yixuan and Joseph, Mary and Kim, Miso and Parker, Andrea G. and Griffin, Jacqueline (2022) Investigating older adults' attitudes towards crisis informatics tools: Opportunities for enhancing. In: CHI '22: Proceedings of the 2022 CHI Conference on Human Factors in Computing Systems , 29 April - 5 May 2022 , New Orleans, LA, USA. pp. 1-16. (258). ISBN 978-145039157-3

Nurul Mubinah, Suhaimi and Zhang, Yixuan and Joseph, Mary and Kim, Miso and Parker, Andrea G. and Griffin, Jacqueline (2022) Investigating older adults’ attitudes towards crisis informatics tools : Opportunities for enhancing community resilience during disasters. In: Conference on Human Factors in Computing Systems - Proceedings; 2022 CHI Conference on Human Factors in Computing Systems, CHI 2022 , 30 April-5 May 2022 , Virtual, Online. pp. 1-16. (258). ISBN 978-145039157-3

Nurul Nadia, Mohammad and Ahmad Aftas, Azman and Mohd Hezri, Marzaki and Ramli, Adnan and Mohd Hezri, Fazalul Rahiman and Saiful Nizam, Tajuddin (2017) Evaluation on energy consumption in compact hydro distillation process between MPC and PID control. In: 8th IEEE Control and System Graduate Research Colloquium, ICSGRC 2017 , 4-5 August 2017 , Shah Alam, Malaysia. pp. 116-121. (8070579). ISBN 9781538603802

Nurul Nadia, Mohammad and Mohd Hezri, Marzaki and Ramli, Adnan and Mohd Hezri, Fazalul Rahiman and Saiful Nizam, Tajuddin (2017) Evaluation of energy consumption in small-scale agarwood distillation pot based on averaged control signal simulation. In: IEEE 13th International Colloquium on Signal Processing and its Applications (CSPA 2017) , 10 - 12 March 2017 , Parkroyal Penang Resort, Batu Ferringhi Beach, Penang. pp. 275-280. (8064965). ISBN 978-1-5090-1184-1

Nurul Nadia, Mohd Zawawi and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif (2017) Coefficient of Friction and Wear Rate Effects of Different Composite Nanolubricant Concentrations on Aluminium 2024 Plate. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012065). ISSN 1757-8981 (Print), 1757-899X (Online)

Nurul Nadia, Mohd Zawawi and Azmi, W. H. and Redhwan, A. A. M. and M. Z., Sharif and Sharma, K. V. (2017) Thermo-Physical Properties of Al2O3-SiO2/PAG Composite Nanolubricant for Refrigeration System. International Journal of Refrigeration, 80. pp. 1-10. ISSN 0140-7007. (Published)

Nurul Nadia, Mohd Zawawi and Wan Hamzah, Azmi and Mohamad Redhwan, Abd Aziz and Ramadhan, Anwar Ilmar and Ali, Hafiz Muhammad (2022) Optimization of air conditioning performance with Al2O3-SiO/PAG composite nanolubricants using the response surface method. Lubricants, 10 (243). pp. 1-21. ISSN 2075-4442. (Published)

Nurul Nadia, Mohd Zawawi and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Hafiz, Muhammad Ali (2022) Performance of air-conditioning system with different nanoparticle composition ratio of hybrid nanolubricant. Micromachines, 13 (1871). pp. 1-18. ISSN 2072-666X. (Published)

Nurul Nadia, Mohd Zawawi and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Ramadhan, Anwar Ilmar (2022) Performance optimization of automotive air-conditioning system operating with al2o3-sio2/pag composite nanolubricants using taguchi method. Automotive Experiences, 5 (2). pp. 121-136. ISSN 2615-6202. (Published)

Nurul Nadia, Nor Hamran and J. A., Ghani and R., Ramli and C. H., Che Haron (2020) A review on recent development of minimum quantity lubrication for sustainable machining. Journal of Cleaner Production, 268 (122165). pp. 1-18. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Nurul Najihah, Mohd Nazri and Muhammad Uzair, Matalif and Mohd Azrul Hisham, Mohd Adib (2020) Effects of blood flow patent and cross-sectional area on hemodynamic into patient-specific cerebral aneurysm via fluid-structure interaction method : A review. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-8., 788 (012022). ISSN 1757-8981

Nurul Qastalani, Radzuan and Mohd Hasnun Ariff, Hassan and Rabiu Muazu, Musa and Anwar P.P., Abdul Majeed and Mohd Azraai, Mohd Razman and Khairil Anwar, Abu Kassim (2019) A support vector machine approach in predicting road traffic mortality in Malaysia. Journal of the Society of Automotive Engineers Malaysia, 4 (2). pp. 1-9. ISSN 2600-8092. (Published)

Nurul Shuhada, Haji Mohamed (2020) Investigation on the microstructure development and corrosion performance of friction stir welded dissimilar AZ31/AZ91 magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Juliawati, Alias).

Nurul Shuhada, Mohamed and Juliawati, Alias (2022) Benzotriazole (BTA) as corrosion inhibitors encapsulated in the micro/nanocontainer for smart coating: A review. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 58..

Nurul Suraya, Azahari (2022) Archimedes screw turbine model simulation on the effect of external and internal design parameters in power generation. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ummu Kulthum, Jamaluddin).

Nurul Suraya, Azahari (2013) Particle impact prediction of an archimedes screw runner blade for micro hydro turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Suraya, Azahari and N. M. M., Ammar and Ummu Kulthum, Jamaludin (2015) The Effect of Substantive Parameters On The Efficiency Of Archimedes Screw Microhydro Power: A Review. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9.. (Unpublished)

Nurul Suraya, Azahari and Ummu Kulthum, Jamaludin and N. M. M., Ammar (2016) Investigation on the Effect of Drive Train System for Archimedes Screw Turbine. In: The 4th International Conference on Engineering and ICT (ICEI 2016) , 4-6 April 2016 , Melaka, Malaysia. pp. 1-5..

Nurul Syahrain, Abd Rahman and Mahfuzah, Mustafa and Rosdiyana, Samad and Norizam, Sulaiman and Nor Rul Hasma, Abdullah and Nurul Hazlina, Noordin and Amran, Abdul Hadi and S. N., Aqida (2017) Initial Experiment of Muscle Fatigue During Driving Game Using Electromyography. In: International Conference On System Engineering And Technology (ICSET 2017) , 2-3 October 2017 , Shah Alam, Selangor. pp. 101-105.. ISBN 978-1-5386-0383-3

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, A. and Rahman, M. and Roy, B. K. and Chakraborty, S. and Hossen, S. and Uddin, I. and Hossain, S. (2014) Frictional Behavior of Polymers Sliding Against Smooth and Rough Mild Steel Counter Faces. Middle-East Journal of Scientific Research, 21 (3). pp. 477-486. ISSN 1990-9233. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. (2016) Investigation of Thin Film Deposition on Stainless Steel 304 Substrates Under Different Operating Conditions. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Chowdhury, M. A. K. and Roy, B. K. (2014) Experimental Study of Friction Coefficient and Wear Rate of Turned and Ground Mild Steel Surfaces Sliding Against Smooth and Rough SS304 Counterfaces. Australian Journal of Mechanical Engineering, 12 (3). pp. 291-304. ISSN 1448-4846. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Debnath, U. K. and Islam, M. M. (2015) Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle. Advances in Tribology, 2015. pp. 1-31. ISSN 1687-5915. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, M. A. and M. M., Rahman and Roy, B. K. and Chakraborty, S. and Islam, M. D. and Aktaruzzaman, M. and Mohammad, N. (2014) Sliding Friction of Steel Combinations. The Open Mechanical Engineering Journal, 8. pp. 364-369. ISSN 1874-155X. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and M. M., Rahman and Kowser, M. A. and Roy, B. K. (2015) Experimental Investigation on Friction Coefficient of Composite Materials Sliding Against SS 201 and SS 301 Counterfaces. Procedia Engineering, 105. pp. 858-864. ISSN 1877-7058. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, M. L. and A. N., Oumer (2016) Influence of Normal Loads and Sliding Velocities on Friction Properties of Engineering Plastics Sliding against Rough Counterfaces. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, Mohammad Lutfar (2014) Frictional Characteristics of Steel Materials Sliding against Mild Steel. Advanced Materials Research, 903. pp. 33-38. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. (2016) Erosive Wear Characteristics of Multi-Fiber Reinforced Polyester under Different Operating Conditions. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. and M. M., Rahman and Roy, B. K. and Kowser, M. A. and Islam, M. M. (2015) Erosion Characteristics of Teflon under Different Operating Conditions. Journal of Polymer Engineering, 35 (9). pp. 889-904. ISSN 2191-0340. (Published)

Nuruzzaman, D. M. and Farah Fazira, Kamaruzaman and NasrahAzmi, Mohd Azmi (2016) Effect of Sintering Temperature on the Properties of Aluminium-Aluminium Oxide Composite Materials. International Journal of Engineering Materials and Manufacture, 1 (2). pp. 59-64. ISSN 0128-1852. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and A. N., Oumer and Ismail, N. M. and Basri, S. (2016) Experimental Investigation on the Mechanical Properties of Glass Fiber Reinforced Nylon. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and Maziyana, Marzuki and Chowdhury, Mohammad Asaduzzaman and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff and Rahman, M. M. and Gebremariam, M. A. (2020) Investigation on microstructure and hardness of aluminium-Aluminium oxide functionally graded material. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 478 -483.. ISSN 2195-4356 ISBN 978-981-15-0950-6

Nuruzzaman, D. M. and Kamaruzaman, F. F. B. (2016) Processing and Mechanical Properties of Aluminium-Silicon Carbide Metal Matrix Composites. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Basri, S. and A. N., Oumer and Zamzuri, Hamedon (2016) Modeling and Flow Analysis of Pure Nylon Polymer for Injection Molding Process. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853

Nuruzzaman, D. M. and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman and Basri, S. and Nur Amira Mardian, Zulkifli (2015) Fabrication and Mechanical Properties of Aluminium-Aluminium Oxide Metal Matrix Composites. International Journal of Mechanical and Mechatronics Engineering (IJMME), 15 (6). pp. 68-75. ISSN 2227-2771 (Print); 2077-124X (Online). (Published)

Nurziana, Kong (2023) Effect of graphene nanoreinforcement on moisture absorption and mechanical properties of epoxy adhesive joint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nur Zalikha, Khalil).

Nurziana, Kong and Nur Zalikha, Khalil (2021) Water absorption mechanism and mechanical performance of adhesively joint aluminum alloy with GNP reinforced epoxy. Materials Today: Proceedings, 51 (2). pp. 1392-1398. ISSN 2214-7853. (Published)

Nurziana Kong, Johan Kong and R. A., Bakar and Lim Yi, Leang and Mohd Adnin, Hamidi (2019) The analysis of wind blade on the performance of vertical axis wind turbine (VAWT). In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

O

Obed M., Ali and Nik Rosli, Abdullah and R., Mamat and Abdul Adam, Abdullah (2015) Comparison of the Effect of Different Alcohol Additives with Blended Fuel on Cyclic Variation in Diesel Engine. Energy Procedia, 75. pp. 2357-2362. ISSN 1876-6102 . (Published)

Obed M., Ali and R., Mamat (2013) Improving Engine Performance and Low Temperature Properties of Blended Palm Biodiesel Using Additives. A Review. Applied Mechanics and Materials, 315. pp. 68-72. ISSN 1662-7482. (Published)

Obed M., Ali and R., Mamat and Awad, Omar I. (2015) Characterization of High Blended Palm Biodiesel Fuel Properties with Chemical Additive. Journal of Pure and Applied Microbiology, 9 (Sp. 2). pp. 505-512. ISSN 0973-7510. (Published)

Obed M., Ali and R., Mamat and C. K. M., Faizal (2014) Characterization of Blended Biodiesel Fuel Properties with Small Portion of Butanol as a Fuel Additive. Applied Mechanics and Materials, 465-46. pp. 137-141. ISSN 1662-7482. (Published)

Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Effects of Diethyl Ether Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. International Journal of Advanced Science and Technology (IJAST), 52. pp. 111-120. ISSN 2005-4238 . (Published)

Obed M., Ali and R., Mamat and C. K. M., Faizal (2014) Influence of 1-Butanol Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. Applied Mechanics and Materials, 465-46. pp. 130-136. ISSN 1662-7482. (Published)

Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Review of the Effects of Additives on Biodiesel Properties, Performance, and Emission Features. Journal of Renewable and Sustainable Energy, 5 (1). ISSN 1941-7012. (Published)

Obed M., Ali and R., Mamat and H. H., Masjuki and Abdul Adam, Abdullah (2016) Analysis of Blended Fuel Properties and Cycle-To-Cycle Variation In A Diesel Engine With A Diethyl Ether Additive. Energy Conversion and Management, 108. pp. 511-519. ISSN 0196-8904. (Published)

Obed M., Ali and R., Mamat and Nik R., Abdullah and Abdul Adam, Abdullah (2015) Analysis of Blended Fuel Properties and Engine Performance with Palm Biodiesel-diesel Blended Fuel. Renewable Energy, 86. pp. 59-67. ISSN 0960-1481. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2015) Analysis of Blended Fuel Properties and Engine Cyclic Variations with Ethanol Additive. Journal of Biobased Materials and Bioenergy, 9 (2). pp. 108-114. ISSN 1556-6560. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2014) Characteristic of Blended Fuel Properties and Engine Cycle To-Cycle Variations with Butanol Additive. In: International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Penang. pp. 1-12..

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2016) Commercial and Synthesized Additives for Biodiesel Fuel. A Review. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3650-3654. ISSN 1819-6608. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2013) Effects of Blending Ethanol with Palm Oil Methyl Esters on Low Temperature Flow Properties and Fuel Characteristics. International Journal of Advanced Science and Technology, 59. pp. 85-96. ISSN 2005-4238 . (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2016) Investigation of Blended Palm Biodiesel-Diesel Fuel Properties With Oxygenated Additive. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5290-5293. ISSN 1819-6608. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah and Fitri, Khoerunnisa and Ratnaningsih, Eko Sardjon (2016) Effects of Different Chemical Additives on Biodiesel Fuel Properties and Engine Performance. A Comparison Review. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38 (03002). ISSN 2261-236X

Obed M., Ali and Talal, Yusaf and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2014) Influence of Chemical Blends on Palm Oil Methyl Esters’ Cold Flow Properties and Fuel Characteristics. Energies, 7 (7). pp. 4364-4380. ISSN 1996-1073 . (Published)

Ojo, Rasheed and Jamlos, M. F. and Soh, Ping Jack and Mohd Aminudin, Jamlos and Norfatihah, Bahari and Lee, Yeng Seng and Al‐Bawri, Samir Salem and Mohamad Shaiful, Abdul Karim and Khairil Anuar, Khairi (2020) A triangular MIMO array antenna with a double negative metamaterial superstrate to enhance bandwidth and gain. International Journal of RF and Microwave Computer-Aided Engineering, 30 (8). pp. 1-2. ISSN 1096-4290. (Published)

Omar, Arshad (2012) Effect of constant and varying mixture properties in spark ignition engine combustion process using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Omar, Nadzeri (2017) Conical spring and localised region methodologies for modelling of soft tissue deformation. PhD thesis, RMIT University (Contributors, Thesis advisor: Yongmin, Zhong).

Omar, Nadzeri and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan and Mohd Amzar, Azizan (2021) Modeling of soft tissue deformation using mass spring method with nonlinear volume force. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 75-90.. ISSN 2195-4356 ISBN 9789811641145

Omar, Nadzeri and Zhong, Yongmin (2021) Flexible mass spring method for modelling soft tissue deformation. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 24-41. ISSN 2289-679X (Print); 2462-1269 (Online). (Published)

Ong, Horn Lu (2013) Single axis rotation pv solar panel tracking system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ong, Rong San (2013) Design and development automated gripper control for robotic arm. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ong, Zhi Chao and Lim, Hong Cheet and Khoo, Shin Yee and Ismail, Zubaidah and Kong, Keen Kuan and Abdul Ghaffar, Abdul Rahman (2017) Assessment of the Phase Synchronization Effect in Modal Testing During Operation. Journal of Zhejiang University-SCIENCE A, 18 (2). pp. 92-105. ISSN 1673-565X(print); 1862-1775(online) . (Published)

Otaka, Kotaro and Ahmad Najmuddin, Ibrahim and Inoue, Kousuke and Fukuoka, Yasuhiro (2018) Adaptive serpentine locomotion of a snake robot involuntarily activated and modified through sensory feedback affected by longitudinal frictional anisotropy. In: 2018 IEEE International Conference on Robotics and Biomimetics; ROBIO 2018 , 12 - 15 December 2018 , Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia. pp. 1795-1801. (8664830). ISBN 9781728103761

Oudah, Ali A. (2014) Routing Schemes for Wireless ATM Networks. International Journal of Energy, Information and Communications, 5 (3). pp. 35-46. ISSN 2093-9655. (Published)

Oumer, A. N. and Chen, James Lau Tze and Azizuddin, Abd Aziz (2019) A review on thermo-physical properties of bio, non-bio and hybrid nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5875-5904. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Oumer, A. N. and M. M., Hasan and Baheta, Aklilu Tesfamichael and R., Mamat and Abdul Adam, Abdullah (2018) Bio-based liquid fuels as a source of renewable energy: A review. Renewable and Sustainable Energy Reviews, 88. pp. 82-98. ISSN 1364-0321. (Published)

P

P., Moorthy and A. N., Oumer and M., Ishak (2018) Experimental investigation on effect of fin shape on the thermal-hydraulic performance of compact fin-and- tube heat exchangers. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-9., 318 (1). ISSN 1757-899X (online)

P., Murukesavan and N. M. M., Ammar and M. S., Idris (2013) Computational Analysis of an Effect of Aerodynamic Pressure on the Side View Mirror Geometry. In: International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

P. Jonga, Rudiyanto and Kahar, Osman and Mohd Azrul Hisham, Mohd Adib (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. In: AIP Conference Proceedings: The 4th International Meeting Of Advances In Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 604-611., 1440. ISSN 0094-243X

P. N. F. M., Shamsuddin and Muhamad Arifpin, Mansor and M. S. A., Hadi and N. Z., Abidin and R., Ibrahim (2020) Development of water trash collector. Journal of Advanced Industrial Electronics Research and Applications (JAIERA), 1 (1). pp. 1-5. ISSN 2756-7842. (Published)

P. Vinothi, S Parawa Karan (2009) Comparison of the cutting force, power, tool life and torque in the end milling of modified AISI P20 tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pakdel, Amir and Witecka, Agnieszka and Rydzek, Gaulthier and Dayangku Noorfazidah, Awang Sh'ri (2017) A Comprehensive Microstructural Analysis of Al-WC micro- and Nano-composites Prepared by Spark Plasma Sintering. Materials & Design, 119. pp. 225-234. ISSN 0264-1275. (Published)

Pakdel, Amir and Witecka, Agnieszka and Rydzek, Gaulthier and Dayangku Noorfazidah, Awang Sh'ri and Nicolosi, Valeria (2018) A comprehensive analysis of extrusion behavior, microstructural evolution, and mechanical properties of 6063 Al-B4C composites produced by semisolid stir casting. Materials Science and Engineering: A, 721. pp. 28-37. ISSN 0921-5093. (Published)

Pakdel, Amir and Witecka, Agnieszka and Rydzek, Gaulthier and Dayangku Noorfazidah, Awang Shri and Nicolosi, Valeria (2018) A comprehensive analysis of extrusion behavior, microstructural evolution, and mechanical properties of 6063 Al–B4 C composites produced by semisolid stir casting. Materials Science and Engineering: A, 721. pp. 28-37. ISSN 0921-5093. (Published)

Pandey, Ashutosh K. and Kalidasan, B. and Reji Kumar, Rajamony and Rahman, Saidur and Tyagi, Vineet Veer and Krismadinata, Krismadinata and Said, Zafar and Salam, P. Abdul and Juanico, Dranreb Earl and Ahamed, Jamal Uddin and Sharma, Kamal and Samykano, Mahendran and Tyagi, S.K. (2022) Solar energy utilization techniques, policies, potentials, progresses, challenges and recommendations in asean countries. Sustainability (Switzerland), 14 (11193). pp. 1-26. ISSN 2071-1050. (Published)

Parvez, M. S. and Rahman, M. M. and Mahendran, Samykano and Ali, M. Y. (2022) Morphological analysis of Polyaniline (PANI) integrated cotton fabric. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 113-117.. ISBN 978-1-83953-782-0

Parvez, M. S. and Rahman, Md Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Current advances in fabric-based airbag material selection, design and challenges for adoption in futuristic automobile applications. Materials Today: Proceedings. p. 123. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Parvez, Md. Shohan and Rahman, Md Mustafizur and Samykano, Mahendran and Mohammad, Yeakub Ali (2024) Surface Morphology and Thermo-Electrical Energy Analysis of Polyaniline (PANI) Incorporated Cotton Fabric. Energy Engineering, 121 (1). pp. 1-12. ISSN 0199-8595. (Published)

Parvez, Md. Shohan and Rahman, Md. Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Electrochemical characterization and joule heating performance of polyaniline incorporated cotton fabric. Physics and Chemistry of the Earth, Parts A/B/C, 129. pp. 1-7. ISSN 1474-7065. (Published)

Pathak, Sudhir Kumar and Tyagi, Vineet Veer and Chopra, Kapil and Reji Kumar, Rajamony and Pandey, Adarsh Kumar (2023) Integration of emerging PCMs and nano-enhanced PCMs with different solar water heating systems for sustainable energy future: A systematic review. Solar Energy Materials and Solar Cells, 254 (112237). pp. 1-43. ISSN 0927-0248. (Published)

Patil, Nagraj and K., Gopalakrishna and B., Sangmesh and Sudhakar, K. and Vijayakumar, G. C. (2018) Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3927-3941. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Paul, John and A. K., Pandey and Mishra, Yogeshwar Nath and Said, Zafar and Mishra, Yogendra Kumar and Ma, Zhenjun and Jacob, Jeeja and K., Kadirgama and M., Samykano and V. V., Tyagi (2022) Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: Recent progresses, challenges, and opportunities. Renewable and Sustainable Energy Reviews, 161 (112321). pp. 1-28. ISSN 1364-0321. (Published)

Paul, John and Jacob, Jeeja and Pandey, A. K. and Vaka, Mahesh and Samykano, M. and Kumaran, K. and Abd Rahim, Nasrudin and Selvaraj, Jeyraj (2024) Meta data analysis on building thermal management using phase change materials. Journal of Energy Storage, 76. pp. 1-15. ISSN 2352-152X. (Published)

Paul, John and K., Kadirgama and M., Samykano and A. K., Pandey and V. V., Tyagi (2022) A comprehensive review on thermophysical properties and solar thermal applications of organic nano composite phase change materials. Journal of Energy Storage, 45 (103415). pp. 1-32. ISSN 2352-152X. (Published)

Paul, John and Mahendran, Samykano and Pandey, Adarsh Kumar and K., Kadirgama and Tyagi, V. V. (2023) Nano engineered paraffin-based phase change material for building thermal management. Buildings, 13 (4). pp. 1-6. ISSN 2075-5309. (Published)

Perabu, Moorty (2009) Design and fabrication test jig for cervical bone. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Peterus, Sharon (2008) PID digital controller for DC motor speed using MC68HC11 microcontroller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Phang, Yun Moon and Gebremariam, M. A. and Hamedon, Zamzuri B. and Azhari, Azmira (2020) Investigation on turning operation using die sinking EDM process. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1569-1573., 46 (169722). ISSN 2214-7853

Pi Remli, M. A. and Ghazali, M. F. and Yusof, M. F.M. and Yusop, Muhammad Hanafi and Wai, Sit Kian and Sidek, Sufian and Najafi, G. (2022) Pipeline fault identification using synchrosqueezed wavelet transform based on pressure transient analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 158-171. ISSN 2289 - 7879. (Published)

Pi Remli, Mohd Aminuddin and Ghazali, M. F. and Azmi, W. H. and Mohd Yusof, M. F. and M. Yusop, Hanafi and Azmi, M. L. (2019) Leak localization using empirical mode decomposition and teager-kaiser energy operator analysis based on pressure transient signal: experimental study. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-10., 469 (1). ISSN 1757-8981

Pi Remli, Muhammad Aminuddin and Ghazali, M. F. and Azmi, W. H. and M. Yusof, M. F. and M. Yusop, Hanafi and Azmi, M. L. (2019) Implementation of I-kaz with Teager-Kaiser energy operator in solving leakage problem using synthetic signal. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-8., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ping, Jack Soh and Fatin Nabilah, Giman and Mohd Faizal, Jamlos and H., Lago and Azremi Abdullah, Al-Hadi (2016) A C-Slotted Dual Band Textile Antenna for WBAN Applications. In: URSI Asia-Pacific Radio Science Conference (URSI AP-RASC) , 21-25 August 2016 , Seoul, Korea. pp. 1621-1624.. ISBN 978-1-4673-8801-6

Ponnusamy, Barath and Wong, Fei Yong and Zulkifli, Ahmad@Manap (2015) A Low Cost Automated Table Tennis Launcher. ARPN Journal of Engineering and Applied Sciences, 10 (1). pp. 291-296. ISSN 1819-6608. (Published)

Prabagar, Murukesavan (2008) Designing and fabricating the punch chuck and precision hole punch diameter 3.0mm, 3.5mm and 4.0mm for turret punch machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Prabhat, Kumar and Akash Kumar, Shukla and Sudhakar, K. and R., Mamat (2017) Experimental Exergy Analysis of Water-Cooled PV Module. International Journal Exergy, 23 (3). pp. 197-209. ISSN 1742-8297. (Published)

Prabowo, Handy and Susilo Wijayanto, Danar and Wisnu Saputra, Taufik and Mohd. Shafie, Bakar (2023) The optimization of savonius helix wind turbine cut-in speed with the variation of blades-twist rotor and number of blades. Jurnal Ilmiah Pendidikan Teknik dan Kejuruan, 16 (2). pp. 81-89. ISSN 2598-6430. (Published)

Prakash Raj, Subramaniam (2013) Failure pressure prediction of pipelines steel in the presence of corrosion defects and pre-strain. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Prakash Raj, Subramaniam (2013) Failure pressure prediction of pipelines steel in the presence of corrosion defects and pre-strain. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Praptijanto, Achmad and Santoso, Widodo Budi and Nur, Arifin and Putrasari, Yanuandri and Dimyani, Ahmad and Suherman, Suherman and Pratama, Mulia and Wahono, Bambang and Wardana, Muhammad Khristamto Aditya and Rosli, Abu Bakar (2019) CFD study several injection timing on homogeneous charge compression ignition hydrogen diesel dual fuels. In: Proceeding - 2019 International Conference on Sustainable Energy Engineering and Application: Innovative Technology Toward Energy Resilience, ICSEEA 2019 , 23-24 October 2019 , Tangerang. pp. 95-100. (8938644). ISBN 978-172813931-9

Prayogo, Wisnu and Siregar, Januar Parlaungan and Soewondo, Prayatni and Nasution, Zulkifli and Hanami, Zarah Arwieny and Ikhwali, M. Faisi and Estim, Abentin and Suryawan, I. Wayan Koko (2023) The investigation on mineral wool performance as a potential filter to remove tss in cikapayang river, east jawa, indonesia. Environment and Natural Resources Journal, 21 (101936). pp. 1-10. ISSN 1686-5456. (Published)

Priyandoko, Gigih and Cholis, N. and Ariyono, S. (2015) Design of Single Acting Pulley Actuator (SAPA) Continuously Variable Transmission (CVT). Energy Procedia, 68. pp. 389-397. ISSN 1876-6102 . (Published)

Priyandoko, Gigih and Romlay, Fadhlur Rahman Mohd and Rosli, Rosmazi and At-Tasneem, Mohd Amin (2017) Design and development of six degrees of freedom articulated robot arm for painting. , [Research Report: Research Report] (Unpublished)

Priyandoko, Gigih and Sani, M. S.M. and Romlay, Fadhlur Rahman Mohd (2016) Electromagnetic braking effect for power steering system. , [Research Report: Research Report] (Unpublished)

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and A., As’arry and K. A. M., Rezali and M. M., Noor and Norhafana, M. and A. A. Mossa, Muntasser and S. M., Shareef (2019) International regulation of vehicle emissions control rules and its influence on academic engine development experimental study and vehicle manufacturing. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-14., 469 (012070). ISSN 1757-899X

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and A., As’arry and K. A. M., Rezali and M. M., Noor and Norhafana, M. and S. M., Shareef (2019) Nano gas bubbles dissolve in gasoline fuel and its influence on engine combustion performance. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012062). ISSN 1757-899X

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and Azizan, As'ary and Khairil Anas, Md Rezali and M. M., Noor and Shareef, Saman M. (2019) Development of evaporative intercooler heat exchanger for vehicle charge air enhancement using CFD simulation. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 6195-6217. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Puteri Norfazreen, Razali (2012) Development of high efficiency combustor system for industrial furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Putri Nur Farhanah, Mohd Shamsuddin and Roshahliza, M. Ramli and Muhamad Arifpin, Mansor (2021) Navigation and motion control techniques for surface unmanned vehicle and autonomous ground vehicle: a review. Bulletin of Electrical Engineering and Informatics, 10 (4). pp. 1893-1904. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Puvanesan, Muthusamy (2013) Experimental investigation of minimum quantity lubrication on tool wear in aluminum alloy 6061-T6 using different cutting tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pylliscia Sumbok, Ak Adan (2009) Evaluation of two different types D2QA microscopic velocity models at low rayleigh number heat transfer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Q

Qaban, Abdullah and Mohmed, Tasneem and M. M., Quazi and Naher, Sumsun (2020) The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel. Materials Today Communications, 25 (101362). pp. 1-11. ISSN 2352-4928. (Published)

Qaban, Abdullah and Quazi, M. M. and Naher, Sumsun (2019) The inhibition effect of tannic acid on corrosion behaviour of HSLA steel in pure water. In: Proceedings of ARSSS International Conference , 18th November, 2019 , Oxford, United Kingdom. pp. 4-6..

Qayyum, Halim and N., Nik Abdullah and M. R. M., Rejab and M., Rashidi (2020) Fracture response of La61.4Al15.9Ni11.35Cu11.35 bulk metallic glass subjected to quasi-static compression loading. In: Materials Today: Proceedings, 1st International Conference on Advanced Light-weight Materials and Structures (ICALMS 2020) , 6-7 March 2020 , Hyderabad, Telangana, India.. pp. 1761-1767., 27 (Part 2). ISSN 2214-7853

Qayyum, Halim and Nik Abdullah, Nik Mohamed and M. R. M., Rejab and Mohd Rashidi, Maarof (2020) Fracture response of La61.4Al15.9Ni11.35Cu11.35 bulk metallic glass subjected to quasi-static compression loading. Materials Today: Proceedings, 27 (Part 2). pp. 1761-1767. ISSN 2214-7853. (Published)

Qayyum, Halim and Nik Abdullah, Nik Mohamed and M. R. M., Rejab and Wan Naimah, Wan Abdul Naim and Ma, Quanjin (2021) Metallic glass properties, processing method and development perspective: a review. The International Journal of Advanced Manufacturing Technology, 112. pp. 1231-1258. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Quanjin, Ma and Idris, Mat Sahat and M. R. M., Rejab and Shukur, Abu Hassan and Zhang, Bo and Merzuki, M.N.M. (2019) The energy-absorbing characteristics of filament wound hybrid carbon fiber-reinforced plastic/polylactic acid tubes with different infill pattern structures. Journal of Reinforced Plastics and Composites, 38 (23-24). pp. 1067-1088. ISSN 0731-6844 (print); 1530-7964 (online). (Published)

Quanjin, Ma and M. R. M., Rejab and Idris, Mat Sahat and M., Amiruddin and Bachtiar, Dandi and Siregar, J. P. and M. I., Ibrahim (2018) Design of portable 3-axis filament winding machine with inexpensive control system. Journal of Mechanical Engineering and Sciences (JMES), 12 (1). pp. 3479-3493. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Quanjin, Ma and M. R. M., Rejab and Kang, Shaofu and Idris, Mat Sahat and M.A.A., M. Zin (2020) The energy-absorbing characteristics of single spherical-roof contoured-core (SRCC) cell with composite materials. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8265-8273. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Quanjin, Ma and M. R. M., Rejab and Kumar, Nallapaneni Manoj and M. S., Idris (2019) Experimental assessment of the 3-axis filament winding machine performance. Results in Engineering, 2. pp. 1-3. ISSN 2590-1230. (Published)

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and M. H., Abdullah (2019) Design an inexpensive augmented reality platform for the customized application. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 39-49. ISSN 2636-9575. (Published)

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Mohamad Nazirul Mubin, Merzuki and Shaoliang, Huang (2019) Compressive properties on the spherical-roof contoured-core with different amounts of diamond-shaped notches. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Shukur, Abu Hassan and Manoj Kumar, Nallapaneni (2020) Effect of winding angle on the quasi-static crushing behaviour of thin-walled carbon fibre-reinforced polymer tubes. Polymers and Polymer Composites, 28 (7). pp. 462-472. ISSN 0967-3911. (Published)

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Zhang, Bo and Merzuki, M.N.M. and Kumar, Nallapaneni Manoj (2019) Wireless technology applied in 3-axis filament winding machine control system using MIT app inventor. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012030). ISSN 1757-8981 (Print), 1757-899X (Online)

Quanjin, Ma and Mohamad Nazirul Mubin, Merzuki and Rejab, M. R. M. and Noh, M. Z. C. (2019) Compressive behaviour of aluminium rectangular hollow tube using Digital Image Correlation (DIC) method. In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-11., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Quanjin, Ma and Mohd Ruzaimi, Mat Rejab and Qayyum, Halim and Mohamad Nazirul Mubin, Merzuki and Mohamad Akmal Hakim, Darus (2020) Experimental investigation of the tensile test using digital image correlation (DIC) method. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020 , 6 - 7 March 2020 , Hyderabad, India. pp. 757-763., 27 (161490). ISSN 2214-7853

Quanjin, Ma and Zhang, Zhenggang and M. R. M., Rejab and M. S., Idris and Bo, Zhang and M. H., Abdullah (2019) Design and fabrication of the portable artwork preservative device (PAPD). Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 31-38. ISSN 2636-9575. (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and Fazal, M. A. and Sazzad, B. S. and Bashir, M. Nasir and Jamshaid, M. (2018) Mechanical and tribological performance of a hybrid MMC coating deposited on Al–17Si piston alloy by laser composite surfacing technique. RSC Advances, 8 (13). pp. 6858-6869. ISSN 2046-2069. (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and M. Nasir, Bashir and Imran, Ali (2018) Scratch Adhesion and Wear Failure Characteristics of PVD multilayer CrTi/CrTiN Thin Film Ceramic Coating Deposited on AA7075-T6 Aerospace Alloy. Journal of Adhesion Science and Technology, 32 (6). pp. 625-641. ISSN 0169-4243. (Published)

Quazi, M. M. and M., Ishak and Fazal, M. A. and Arslan, A. and Rubaiee, Saeed and Qaban, Abdullah and Aiman, Mohd Halil and Sultan, Tipu and Ali, M. M. and Manladan, S. M. (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Optics & Laser Technology, 126 (106090). ISSN 0030-3992. (Published)

Qurratu 'Aini Aishah, Ahmad Fazil (2021) Prediction of blood glucose level based on lipid profile and blood pressure using multiple linear regression model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Qurratu 'Aini Aishah, Ahmad Fazil and Ummu Kulthum, Jamaludin (2021) Prediction of blood glucose level based on lipid profile and blood pressure using multiple linear regression model. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 43-61.. ISSN 2195-4356 ISBN 978-981164114-5

Qurratu Aini Aishah, Ahmad Fazil and U. K., Jamaludin (2017) Investigation on the relationship between cholesterol and blood glucose levels using decision tree method in healthy subjects. In: International Conference on Automatic Control and Intelligent Systems (I2CACIS) , 21 October 2017 , Kota Kinabalu, Sabah. pp. 161-166., 2017. ISBN 978-153860846-3

Qurratuaini, Hassanusi (2013) Thermodynamic Study of Propane Dehydrogenation Into Propylene. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

R

R., Daud and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2009) Prediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2009 , 18–20 March 2009 , Hong Kong. pp. 1-6., II. ISBN 978-988-17012-7-5

R., A. Bakar and Widudo, . and K., Kadirgama and D., Ramasamy and Yusaf, Talal and M. K., Kamarulzaman and Sivaraos, . and Aslfattahi, Navid and Samylingam, L. and Alwayzy, Sadam H. (2022) Experimental analysis on the performance, combustion/emission characteristics of a DI diesel engine using hydrogen in dual fuel mode. International Journal of Hydrogen Energy. pp. 1-18. ISSN 0360-3199. (In Press / Online First) (In Press / Online First)

R., Daud and Mas Ayu, Hassan and Salwani, Mohd Salleh and Siti Haryani, Tomadi and Mohammed Rafiq, Abdul Kadir and Raghavendran, Hanumantharao Balaji and Tunku, Kamarul (2017) Artificial Neural Network: The Alternative Method to Obtain the Dimension of Ankle Bone Parameters. Journal of Engineering and Applied Sciences, 12 (10). pp. 2782-2787. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

R., Daud and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Mas Ayu, Hassan and Hanumantharao, Balaji Raghavendran and Tunku, Kamarul (2015) Development of Talus Implant based on Artificial Neural Network prediction of Talus Morphological Parameters. In: 1st International Conference on Materials and Manufacturing Engineering and Technology , 28-31 July 2015 , Korea. . (Unpublished)

R., Daud and N. Zara, Kolan and Mas Ayu, Hassan and Siti Haryani, Tomadi and Sudin, Izman (2015) Study of Flow and Temperature Effect on Carbon Steel in Oil and Gas Environment. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 19-22 Sept 2015 , Johor Bahru. . (Unpublished)

R., Daud and Suaidah, S. and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Mas Ayu, Hassan and Hanumantharao, Balaji Raghavendran and Tunku, Kamarul (2015) Deveploment of Novel Talus Implant Based on Artificial Neural Network Prediction of Talus Morphological Parameters. In: World Bio Summit & Expo 2015 , 1-5 Nov 2015 , Dubai. . (Unpublished)

R., Ismail and A. P., Bayuseno and D. F., Fitriyana and R. B., Taqriban and R. C., Muhamadin and R. A. N., Al Hakim and J. P., Siregar (2022) Mechanical properties characterization of Ti6Al4V for artificial hip joint materials prepared by investment casting. In: IOP Conference Series: Earth and Environmental Science, The 10th Engineering International Conference , 23 September 2021 , Virtual Conference, Semarang, Indonesia. pp. 1-7., 969 (012001). ISSN 1755-1307

R., Linggamm and M. Nasir, Bashir and Quazi, M. M. and M., Ishak (2021) The influence of nanosecond fibre laser on the removal of paint on metallic surface. International Journal of Technology and Engineering Studies, 7 (2). pp. 1-7. ISSN 2414-3413. (Published)

R., Mamat (2010) Comparative Study On Diesel Engine Performance Operatingwith Biodiesel And Diesel Fuel. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

R., Mamat (2010) One-Dimensional Simulation For Single Cylinder Diesel Engine Operating With Ethanol. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

R., Mamat (2019) Renewable Fuel for Transportation Engines. In: Proceedings of International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019) , 8-9 March 2019 , Manipal University Jaipur. p. 17..

R., Mamat and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin and Nik Rosli, Abdullah and Wyszynski, Miroslaw L. (2013) Cycle-to-Cycle Variations of a Diesel Engine Operating with Palm Biodiesel. In: Proceedings of 39th International Scientific Congress on Powertrain and Transport Means European (KONES2013) , 6-12 September 2013 , Turata, Poland. pp. 1-9..

R., Mamat and Azmi, W. H. and G., Najafi and Ghobadian, B. and Yusaf, Talal (2015) Solar Energy in Iran: Current State and Outlook. Renewable and Sustainable Energy Reviews, 49. pp. 931-942. ISSN 1364-0321. (Published)

R., Mamat and Bundschuh, Jochen and Yusaf, Talal and Maity, Jyoti Prakash and Nelson, Emily and Indra Mahlia, T.M. (2014) Algae-biomass for Fuel, Electricity and Agriculture. Energy, 78. pp. 1-3. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

R., Mamat and Fayyazi, E. and Ghobadian, B. and G., Najafi and Hosseinzadeh, B. and Hosseinzadeh, J. (2015) An Ultrasound-Assisted System For The Optimization Of Biodiesel Production From Chicken Fat Oil Using A Genetic Algorithm And Response Surface Methodology. Ultrasonics Sonochemistry. ISSN 1350-4177. (In Press / Online First) (In Press / Online First)

R., Mamat and I. M., Yusri and M. K., Akasyah and O. M., Ali (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fuelled with N-Butanol Blends. Jurnal Teknologi (Sciences and Engineering), 77 (8). pp. 69-73. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

R., Mamat and Moosavian, Ashkan and Khazaee, Meghdad and G., Najafi and Kettner, Maurice (2015) Spark Plug Fault Recognition Based on Sensor Fusion and Classifier Combination using Dempster–Shafer Evidence Theory. Applied Acoustics, 93. pp. 120-129. ISSN 0003-682X. (Published)

R., Mamat and Nor Azwadi, Che Sidik and Alawi, Omer A. (2015) Performance Analysis of Nanorefrigerants in Heated and Rotating Concentric And Eccentric Annulus Cylinders. Jurnal Teknologi (Sciences and Engineering), 77 (8). pp. 91-97. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

R., Mamat and Wan Nor Maawa, Wan Ghazali and H. H., Masjuki and G., Najafi (2015) Effects of Biodiesel from Different Feedstocks on Engine Performance and Emissions: A Review. Renewable and Sustainable Energy Reviews, 51. pp. 585-602. ISSN 1364-0321. (Published)

R., Reji Kumar and M., Samykano and W. K., Ngui and A. K., Pandey and B, Kalidasan and K., Kadirgama and V. V., Tyagi (2022) Investigation of thermal performance and chemical stability of graphene enhanced phase change material for thermal energy storage. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103250). pp. 1-7. ISSN 1474-7065. (Published)

R., Rosli and Priyandoko, Gigih and Zamri, Mohamed (2018) Simulation of an active force control scheme for a semi active seat suspension system using MR damper. In: International Conference On Science, Engineering & Technology (I-SET 2018) , 2 - 3 May 2018 , UNMUHA Convention Centre, University of Muhammadiyah (UNMUHA) Banda Aceh, Indonesia. pp. 1-7.. (Unpublished)

R. A., Bakar and Abdul Rahim, Ismail and Ismail, Ali (2007) The Comparison Of Engine Performance For Diesel And CNG Fuel Using GT-Power Software. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

R. A., Bakar and D., Ramasamy (2008) Design and Development of Hybrid Electric Vehicle Rear Diffuser. In: National Seminar Science Technology and Sosial Sciences, Malaysia, , 3-4 June, 2008 , nil. . (Unpublished)

R. A., Bakar and N.M.I.N, Ibrahim and M.F.A, Rahim and I., Ali (2007) Numerical Analysis of In-Cylinder Process Small Two-Stroke SI Engine. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

R. A., Bakar (2010) Design And Developmentof Actuation Part Of Piezoelectric Generator Prototyping For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

R. A., Bakar (2010) Development Assessment Of Solar Concentrating Power System for Green Energy Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

R. A., Bakar and A. M., Mohd Shafie and Musthafah, M. T. and M. S., Ali (2014) Intake Analysis On Four-Stroke Engine Using CFD. In: 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-11.. (Unpublished)

R. A., Bakar and Abdul Rahim, Ismail (2007) Development of Intake and Exhaust Stroke Flow Simulation in an Engine Cylinder Using CFD Model. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

R. A., Bakar and Ammar Alfaiz, M. A. and Musthafah, M. T. and M. Shahir, Ali and Abdul, Muhaimin (2015) New Design of a Low Cost Small Engine Dynamometer for Engine Testing. Applied Mechanics and Materials, 699. pp. 642-647. ISSN 1662-7482. (Published)

R. A., Bakar and Gan, Leong Ming and Wong, Hong Mun and D., Ramasamy and Mohd Fazli, Ismail (2008) Intelligent Height and Reach Adjustable Electronic Chair for Children with Dwarfism (ZUMP). Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 47-58. ISSN 1985-5176. (Published)

R. A., Bakar and Kwan, Teck Heng (2008) Analysis of Air Flow in Intake System Using Computational Fluid Dynamics. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 75-92. ISSN 1985-5176. (Published)

R. A., Bakar and L. M., Gan and M. M., Tahir and A. A., Yusof (2017) Pre-charge pressure effects on isothermal and adiabatic energy storage capacity for dual hybrid hydro-pneumatic passenger car driveline. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 3-4. ISBN 9789670257884 (Unpublished)

R. A., Bakar and Mohamad Fatasya, Othman and Asnul Hadi, Ahmad (2008) The Trends of Research in Compressed Natural Gas (CNG) Pressure Vessel Technology: An Overview. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 23-36. ISSN 1985-5176. (Published)

R. A., Bakar and Musthafah, Mohd Tahir and M. S., Ali and M. A., Salim and A. M., Fudhail and M. Z., Hassan and M. S., Abdul Muhaimin (2015) Performance Analysis of a Spark Ignition Engine using Compressed Natural Gas (CNG) as Fuel. Energy Procedia, 68. pp. 355-362. ISSN 1876-6102 . (Published)

R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and T. Z. S., Ali (2016) Study on Effect of Human Metabolic Rate on Skin Temperature in Office Environment. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali (2017) Effect on Human Metabolic Rate of Skin Temperature In An Office Occupant. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01070). ISSN 2261-236X

R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali and Musthafah, Mohd Tahir (2016) Experimental Study on Skin Temperature of People in Office Activities at Different Air Temperatures. In: Engineering Technology International Conference 2016 , 4-5 August 2016 , Ho Chi Minh City, Vietnam. . (Unpublished)

R. A., Bakar and Tanti, Ali and Billy, Anak Sup and Mohd Farid, Zainudin and Gan, Leong Ming (2015) Study on Thermal-fluid Effect of Thermal Energy Storage Tank Design in Solar Energy Applications. Energy Procedia, 68. pp. 3-11. ISSN 1876-6102 . (Published)

R. M., Yaacob and M. A. H., Hashim and M. S. M., Sani (2019) Finite element modeling and updating of the composite plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012013). ISSN 1742-6588 (print); 1742-6596 (online)

Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, M. S. and Narimah, Daud and Nur Hazreen, Mohd Hasni (2021) Ergonomics study on visual contribution of postural stability using Physio-Treadmill (PhyMill) for kid with cerebral. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 1137-1149.. ISBN 978-981-16-0866-7

Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, M. S. and Narimah, Daud and Nur Hazreen, Mohd Hasni (2020) An ergonomic perspective of user need on physio-treadmill (PhyMill) criteria: knowledge and awareness of cerebral palsy among future parents. In: Journal of Physics: Conference Series, The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS) , 25-27 November 2019 , Bandung, Indonesia. pp. 1-9., 1529 (052071). ISSN 1742-6588 (print); 1742-6596 (online)

Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, Mohd Shalahim and Narimah, Daud and Nur Hazreen, Mohd Hasni (2022) The Treatment Impact of Partial Body Weight Supported Treadmill (PBWST) on Cerebral Palsy Kid Using Physio-Treadmill (PhyMill): A Case Study. In: 6th Kuala Lumpur International Conference on Biomedical Engineering 2021 , 28-29 July 2021 , Kuala Lumpur, Malaysia. pp. 269-276., 86 (277179). ISBN 978-3-030-90723-5

Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, Mohd Shalahim and Narimah, Daud and Nur Hazreen, Mohd Hasni (2020) An ergonomic perspective of user need on physio-treadmill (phymill) criteria: knowledge and awareness of cerebral palsy among future parents. Journal of Physics: Conference series, 1529 (5). pp. 1-9. ISSN 1742-6588 (print); 1742-6596 (online). (Published)

Rabiatul Syuhada, Hasan and Muhammed Nafis, Osman Zahid (2022) Implementation of lean tools as waste assessment method in a coil spring manufacturing. In: The 4th International Conference on Engineering and Technology for Sustainable Development (4th ICET4SD 2021) . pp. 1-13.. (Submitted)

Rabiatuladawiah, Kamaruddin (2010) Design of a small heat exchanger (Shell-and-tube type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Mohd Azraai, M. Razman and Mohd Ali Hanafiah, Shaharudin (2018) Match outcomes prediction of six top English Premier League clubs via machine learning technique. In: The 6th International Conference On Robotics Intelligence And Applications 2018 , 15-19 Disember 2018 , Putrajaya, Malaysia. pp. 1-10.. (Unpublished)

Rabiu Muazu, Musa and Isyaku, Hassan and Mohamad Razali, Abdullah and Mohd Nazri, Latiff Azmi and Abdul Majeed, Anwar P. P. and Noor Azuan, Abu Osman (2022) A longitudinal analysis of injury characteristics among elite and amateur tennis players at different tournaments from electronic newspaper reports. Frontiers in Public Health, 10 (835119). pp. 1-14. ISSN 2296-2565. (Published)

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Bio-Physiological Indicators in Evaluating Archery Performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 13-20. ISBN 978-981-13-2592-2

Radhiyah, Abd Aziz and Maisalsadila, Ismail (2018) Effect of Ferritic - Martensitic Constituent on Mechanical Property and Corrosion Behaviour of Medium Carbon Dual Phase (DP) Steel. Saudi Journal of Engineering and Technology, 3 (3). pp. 188-191. ISSN 2415-6264 . (Published)

Radhwan, H. and Nasir, S. M. and Mohd Rashidi, Maarof and Kamarudin, K. and Abdellah, Abdellah el-hadj (2019) Optimization parameters to reduce the warpage defect of plastic injection molding process for a thin-shell part using design of experiment. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-7., 551 (012027). ISSN 1757-8981 (Print), 1757-899X (Online)

Radiah, Sarip (2014) The validation of satelite-based wind speed maps to in-situ data record. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib (2012) Comparative study of biofuel and biodiesel blend with mineral diesel using one-dimensional simulation. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (012009). ISSN 1757-899X

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on Diesel Engine Performance Operating With Biodiesel Blend. Journal of Mechanical Engineering and Sciences (JMES) , 2. pp. 226-236. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on a Diesel Engine Performance Operating with Biodiesel Blended. International Journal of Advanced Science and Technology, 43. pp. 115-126. ISSN 2005-4238 . (Published)

Rafizuan, Ramli (2008) Machining of advanced composite. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Rahil Izzati, Mohd Asri (2018) Thermal oxidation and hydroxyapatite coating of SLMed 316L stainless steel substrates. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mahendran, Samykano and Nurul Akmal, Che Lah and S. A., Che Ghani and F., Tarlochan and M. R., Raza (2017) Corrosion and Surface Modification on Biocompatible Metals: A Review. Materials Science and Engineering: C, 77. pp. 1261-1274. ISSN 0928-4931. (Published)

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mas Ayu, Hassan and S. A., Che Ghani and Z., Buyong (2016) A Review of Hydroxyapatite-Based Coating Techniques: Sol–Gel and Electrochemical Depositions on Biocompatible Metals. Journal of the Mechanical Behavior of Biomedical Materials, 57. pp. 95-108. ISSN 1751-6161. (Published)

Rahil Izzati, Mohd Asri and Wan Sharuzi, Wan Harun and Asmara, Y. P. (2016) Effect of Acid Pickling on Microstructure and Surface Roughness of 316L Stainless Steel. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 142-146..

Rahim, Md. Abdur and Rahman, M.M. and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman (2021) A framework of IoT-enabled vehicular noise intensity monitoring system for smart city. In: Advances in Intelligent Systems and Computing book series. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Springer Nature Switzerland, pp. 194-205. ISBN 978-3-030-70917-4

Rahimah, Jusoh and Roslinda, Nazar (2019) Effect of heat generation on mixed convection of micropolar Casson fluid over a stretching/shrinking sheet with suction. In: 14th International Symposium on Geometric Function Theory and Applications, GFTA 2018 , 3 - 5 December 2018 , Puri Pujangga Hotel, Universiti Kebangsaan Malaysia, Selangor; Malaysia. pp. 1-6., 1212 (012024). ISSN 1742-6588 (Print); 1742-6596 (Online)

Rahimi, Ramli and Izwan, Ismail (2021) Effect of dimple diameter and pattern on frictional properties of macro-dimpled aluminium surface. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. 139 -146.. ISSN 2195-4356 ISBN 9789811573088

Rahmad Doni, Widodo and Rusiyanto, . and Wahyudi, . and Melisa Kartika Sari, . and Deni Fajar Fitriyana, . and Siregar, Januar Parlaungan and Cionita, Tezara and Da Silva Guterres, Natalino Fonseca and Da Silva, Mateus De Sousa and Jamiluddin, Jaafar (2023) Effect of compression molding temperature on the characterization of asbestos-free composite friction materials for railway applications. AIMS Materials Science, 10 (6). pp. 1105-1120. ISSN 2372-0484. (Published)

Rahman, Hammad A. and Khairi, N. D. A. and M. S. M., Sani (2019) Finite element model updating of dissimilar plate with rivet joint. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (012035). ISSN 1742-6588 (print); 1742-6596 (online)

Rahman, M. M. and Kadirgama, Kumaran and Bachtiar, Dandi and Siregar, J. P. and Sulaiman, A. S. (2014) Modelling of lightweight sandwich structures based on corrugated-cores. , [Research Book Profile: Research Report] (Unpublished)

Rahman, M. M. and Kumaran, Kadirgama and Devarajan, Ramasamy and Wan Sharuzi, Wan Harun and Rizalman, Mamat and Muhamad, Mat Noor (2018) Biodiesel-diesel (up to 45%) fuel characteristics on homogeneous charge compression ignition engine. , [Research Book Profile: Research Report] (Unpublished)

Rahman, M. M. and Muhamad, Mat Noor and Abdul Adam, Abdullah and Rosli, Abu Bakar and Rizalman, Mamat and Kumaran, Kadirgama and Devarajan, Ramasamy (2018) Impact biodiesel fuel characteristics on ultra-low emission homogeneous charge compression ignition engine. , [Research Book Profile: Research Report] (Unpublished)

Rahman, Md. Arafatur and Md. Abdur, Rahim and Rahman, Md Mustafizur and Moustafa, Nour and Imran, Razzak and Ahmad, Tanvir and Patwary, Mohammad N. (2022) A secure and intelligent framework for vehicle health monitoring exploiting big-data analytics. IEEE Transactions on Intelligent Transportation Systems. pp. 1-16. ISSN 1524-9050. (Published)

Rahman, Sam Matiur and Ali, Md. Asraf and Altwijri, Omar and Alqahtani, Mahdi and Ahmed, Nasim and Ahamed, Nizam Uddin (2020) Ensemble-based machine learning algorithms for classifying breast tissue based on electrical impedance spectroscopy. In: International Conference on Applied Human Factors and Ergonomics : AHFE 2019 , 24 - 28 July 2019 , Washington D.C., United States. pp. 260-266., 965. ISSN 2194-5357 ISBN 978-3-030-20453-2 (Print); 978-3-030-20454-9 (Online)

Rahmat, Che Hassim (2010) Investigate the potential of wind environment for natural ventilation. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Rai, Rahool and Larik, Ali Raza and Ahmed, Kashif and Kumaramasy, Sudhakar and Zaidi, Asad Ali (2023) Comparative Analysis of finned absorber plate with and without black paint in Solar Air Heater. In: 2023 4th International Conference on Computing, Mathematics and Engineering Technologies: Sustainable Technologies for Socio-Economic Development, iCoMET 2023 , 17-18 March 2023 , Sukkur. pp. 1-4.. ISBN 979-835033531-6

Raiyan, M. F. and Ahamed, J. U. and M. M., Rahman and Salam, M. A. (2017) Performance and Exergetic Investigation of a Domestic Split Air Conditioner using Blends of R22 and R290. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4125-4139. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Raja Hamzah, Raja Ismail (2015) Mechanical Design on Cutting Tool Life. Research Gate. (Published)

Raja Mohd Salleh, Raja Bahtiar (2008) Remote machining for laser cutting applications. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Mohd Taufika, Raja Ismail and Ahmad Nor Kasruddin, Nasir and Mohd Ashraf, Ahmad (2010) Performance Comparisan Between Sliding Mode Control (Smc) And Pd-Pid Controllers For A Nonlinear Inverted Pendulum System. In: International Conference On Control, Automation, Robotics & Vision (Iccarv 2010) , 27 – 29 June 2010 , Holiday Inn Hotel, Paris, France. . (Unpublished)

Raja Mohd Taufika, Raja Ismail (2015) Modelling and control of offshore crane systems. PhD thesis, University of Technology, Sydney (Contributors, UNSPECIFIED: UNSPECIFIED).

Raja Mohd Taufika, Raja Ismail and Mohd Anwar, Zawawi and Mohd Syakirin, Ramli (2011) Dynamic Modelling of a Double‐Pendulum Gantry Crane System Incorporating Payload. In: AIP Conference Proceedings: The 4th Global Conference On Power Control And Optimization , 02-04 December 2010 , Damai Puri, Kuching, Sarawak. pp. 118-122., 1337 (1). ISSN 0094-243X ISBN 978-0-7354-0893-7

Rajamony, R. K. and Mahendran, Samykano and Pandey, A. K. and Babu, S. Ramesh and Noor, M. M. and Devarajan, R. and Paw, J. K. Siaw and Natarajan, S. K. (2023) Investigation on thermophysical properties of multi-walled carbon nanotubes enhanced salt hydrate phase change material. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10595-10605. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Rajamony, Reji Kumar and Paw, Johnny Koh Siaw and Pandey, Adarsh Kumar and Tak, Yaw Chong and Pasupuleti, Jagadeesh and Tiong, Sieh Kiong and Yusaf, Talal F. and Samykano, Mahendran and Nurhanis Sofiah, Abd Ghafar and Kalidasan, B. and Ahmed, Oday A. and Kadirgama, Kumaran (2024) Energizing the thermophysical properties of phase change material using carbon-based nano additives for sustainable thermal energy storage application in photovoltaic thermal systems. Materials Today Sustainability, 25 (100658). pp. 1-17. ISSN 2589-2347. (Published)

Rajan, Kumaresan and Jeevendran, Kananathan and Samykano, Mahendran and Kadirgama, Kumaran and Avinash, M. Badadhe (2022) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 42..

Rajan, Kumaresan and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and Ngui, Wai Keng and Adarsh Kumar, Pandey (2021) 3D printing technology for thermal application: a brief review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 84-97. ISSN 2289-7879. (Published)

Rajan, Kumaresan and Mahendran, Samykano and Kumaran, Kadirgama and Adarsh, Kumar Pandey and Md Mustafizur, Rahman (2023) Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ramachandran, K. and K., Kadirgama and Awad, Omar I. and D., Ramasamy and Mahendran, Samykano and Azmi, W. H. (2018) Comprehensive review of principle factors for thermal conductivity and dynamic viscosity enhancement in thermal transport applications: An analytical tool approach. International Communications in Heat and Mass Transfer, 98. pp. 13-21. ISSN 0735-1933. (Published)

Ramachandran, Kaaliarasan and K., Kadirgama and D., Ramasamy and Hussein, A.M. and Azmi, W. H. and Tarlochan, F. and Kadirgama, G. (2017) Thermophysical Properties Measurement of Nano Cellulose in Ethylene Glycol/Water. Applied Thermal Engineering, 123. pp. 1158-1165. (Published)

Ramadhan, A. I. and Azmi, W. H. and Mamat, Rizalman and Abdul Hamid, K. (2020) Experimental and numerical study of heat transfer and friction factor of plain tube with hybrid nanofluids. Case Studies in Thermal Engineering, 22. p. 100782. ISSN 2214-157X. (Published)

Ramadhan, Anwar Ilmar and Wan Azmi, Wan Hamzah (2021) The effect of nanoparticles composition ratio on dynamic viscosity of Al2O3-TiO2-SiO2 nanofluid. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1920-1923., 48 (6). ISSN 2214-7853

Ramadhan, Anwar Ilmar and Wan Azmi, Wan Hamzah and Rizalman, Mamat and Diniardi, Ery and Hendrawati, Tri Yuni (2022) Experimental investigation of cooling performance in automotive radiator using al2o3-tio2-sio2 nanofluids. Automotive Experiences, 5 (1). pp. 28-39. ISSN 2615-6202. (Published)

Ramanan, P. and Kalidasa Murugavel, K. and Karthick, A. and Sudhakar, K. (2020) Performance evaluation of building-integrated photovoltaic systems for residential buildings in southern India. Building Services Engineering Research and Technology, 41 (4). pp. 492-506. ISSN 0143-6244. (Published)

Ramaraju, Ramgopal Varma and Reddy, M. Chandra Sekhara and Rao, Veeredhi Vasudeva (2013) Experimental Investigation Of Relative Performance Of Water Based Tio2 And Zno Nanofluids In A Double Pipe Heat Exchanger. In: International Manufacturing Engineering Conference (IMEC 2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-10.. (Unpublished)

Ramaraju, Ramgopal Varma and M. Chandra, Sekhara Reddy and Veeredhi, Vasudeva Rao (2015) Experimental Investigation of Relative Performance of Water Based Tio and Zno Nanofluids in a Double Pipe Heat Exchanger. Journal on Mechanical Engineering,, 5 (1). pp. 6-11. (Published)

Ramasamy, D. (2013) Engine valve seat wear study on compressed natural gas (CNG)by using nano powder. (Unpublished)

Ramasamy, D. and Samykano, M. and Kadirgama, Kumaran and Lee, Giok Chui and Noor, M. M. and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method. , [Research Report: Research Report] (Unpublished)

Ramasamy, Devarajan and Muhamad, Mat Noor and Azlyna, Senawi and Ahmad Syahrizan, Sulaiman (2008) Static recovery process modelling of engineering metallic alloys. In: Proceeding of Malaysian Metallurgical Conference (MMC 2008) , 3-4 December 2008 , UKM, Bangi, Selangor. pp. 1-5..

Ramasamy, Linggamm and Quazi, Moinuddin Mohammed and Aiman, M.H. and Mahadzir, Ishak (2021) Laser celaning process for the removal of surface contaminants, corrosion and paint. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Rameshbabu, Ramachandran and Koh, Siaw Paw and Kaviyarasan, Kulandaivelu and Yaw, Chong Tak and Tiong, Sieh Kiong and Benedict, Foo and Yusaf, Talal F. and Valdés, Héctor and Kadirgama, Kumaran and Pasupuleti, Jagadeesh (2024) Construction novel highly active photocatalytic H2 evolution over noble-metal-free trifunctional Cu3P/CdS nanosphere decorated g-C3N4 nanosheet. International Journal of Hydrogen Energy, 55. pp. 592-603. ISSN 0360-3199. (Published)

Ramkiran, B. and Sundarabalan, C. K. and Sudhakar, K. (2020) Performance evaluation of solar PV module with filters in an outdoor environment. Case Studies in Thermal Engineering, 21 (100700). pp. 1-9. ISSN 2214-157X. (Published)

Ramkiran, B. and Sundarabalan CK, C. K. and Sudhakar, K. (2021) Sustainable passive cooling strategy for PV module: A comparative analysis. Case Studies in Thermal Engineering, 27 (101317). pp. 1-10. ISSN 2214-157X. (Published)

Ramli, Junid and Siregar, J. P. and Nor Azam, Endot and Jeefferie, Abd Razak and Wilkinson, Arthur N. (2021) Optimization of glass transition temperature and pot life of epoxy blends using response surface methodology (RSM). Polymers, 13 (19). pp. 1-18. ISSN 2073-4360. (Published)

Ramli, Junid and Y., Nor Imrah and A. R., Jeeferie and Mohamad Mazwan, Mahat (2011) A Study on the Potential of Cost and Energy - A Survey at Playford Building, University of South Australia. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 25-36. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ramyashree, M. S. and Kumar, K. and Priya, S. Shanmuga and Sudhakar, K. (2020) Synthesis and characterisation of indium tin oxide thin films for dye-sensitised solar cells using natural fruit extracts. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). 9284 -9291. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ranj, Sirwan and Alghoul, M.A. and K., Sopian and Yusoff, Ali (2012) Thermodynamic Analysis of an Ejector-Flash Tank-Absorption Cooling System. Applied Thermal Engineering, 58 (1-2). pp. 85-97. ISSN 1359-4311. (Published)

Rao, B. Govinda and Rao, V. Dharma and Naidu, S. V. and Sharma, K. V. and Sreenivasulu, B. (2011) Heat transfer from a vertical fin array by laminar natural convection and radiation-A quasi-3D approach. Heat Transfer - Asian Research, 40 (6). pp. 524-549. ISSN 1099-2871. (Published)

Rao, G. Srinivasa and K. V., Sharma and Chary, S. P. and R. A., Bakar and M. M., Rahman and K., Kadirgama and M. M., Noor (2011) Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 1-15. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rao, N. Thiwaan and A. N., Oumer and Ummu Kulthum, Jamaludin (2016) State-of-the-art on Flow and Heat Transfer Characteristics of Supercritical CO2 in Various Channels. The Journal of Supercritical Fluids, 116. pp. 132-147. ISSN 0896-8446. (Published)

Rao, N. Thiwaan and Oumer, A. N. and Devandran, G. and M. M., Noor (2018) Investigation on Flow and Heat Transfer of Supercritical CO2 in Helical Coiled Tubes at Various Supercritical Pressures. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (01018). ISSN 2261-236X

Rao, N.T. and Oumer, A. N. and Noor, M. M. and Kadirgama, K. and Basrawi, F. and Siregar, J. P. (2023) Parametric optimisation of supercritical CO2 thermal-hydraulic characteristics in microchannels using response surface methodology. Australian Journal of Mechanical Engineering, 21 (3). pp. 894-910. ISSN 1448-4846. (Submitted) (Submitted)

Rashid, Mamunur and Bari, Bifta Sama and Norizam, Sulaiman and Mahfuzah, Mustafa and Md Jahid, Hasan and Islam, Md Nahidul and Naziullah, Shekh (2021) A hybrid environment control system combining EMG and SSVEP signal based on brain-computer interface technology. SN Applied Sciences, 3 (9). pp. 1-14. ISSN 2523-3971. (Published)

Rashid Chand, Mohamad Rizdwan and Mohamad Firdaus, Basrawi and Azizuddin, Abd Aziz and Zafri, Azran and Shaharin Anwar, Sulaiman and Afzam, Zulkepli Evaluation on methods in estimating the photovoltaic performances affected by module operation temperature in tropical region. In: MATEC Web of Conferences; 2018 UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18 - 19 September 2018 , Tamil Nadu, India. pp. 1-11., 225 (04018). ISSN 2261-236X

Rashidi, M. M. and Mohd Hasbullah, Idris (2014) The Effect Of Solidification On The Microstructure And Mechanical Properties Of Modified Ductile Ni-Resist Iron With A High Manganese Content. Materials Science and Engineering: A, 597. pp. 305-407. ISSN 0921-5093. (Published)

Rashidi, M. M. (2021) Processing of Customized Automotive Components Nickel Aluminium Bronze Material using Metal Casting Techniques. FTKMA Bulletin . p. 14. ISSN 2773-594X

Rasidi, Ibrahim and Abdul Halim, Erween and S. A., Che Ghani and A. A., Ibrahim and N. A., Maskam (2014) The Effect on the Application of Coolant and Ultrasonic Vibration Assisted Micro Milling on Machining Performance. Applied Mechanics and Materials, 660. pp. 65-69. ISSN 1662-7482. (Published)

Raslan, A. Alenezi and Omar I., Awad and Rizalman, Mamat and G., Najafi (2021) Set-up of the experiment and improve the performance and emissions of diesel fuel with fusel oil additive from waste products. Journal of Engineering Research, 11 (1A). pp. 1-21. ISSN 2307-1885. (Published)

Rawaida , Jaafar (2012) Unclean hand detection machine using vision sensor. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Razali, Akhtar Razul Development of a low power micro-sheet-forming machine for micro-products production. , [Research Report: Research Report] (Unpublished)

Razali, Akhtar Razul Development of an aluminium coreless ironless generator for EV applications. , [Research Report: Research Report] (Unpublished)

Razali, Akhtar Razul (2018) The effect of soft ironcore lamination removal towards cogging torque in an electric generator. , [Research Report: Research Report] (Unpublished)

Reddy, Baridula Ravinder and Abdullah, Ibrahim and C. K. M., Faizal and Ramaraju, Ramgopal Varma (2016) Effect of Rotational Speed on Mechanical Properties and Microstructure Due to the Addition of Reinforcements on Friction Stir Welded Dissimilar Aluminum Alloys. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 421-427..

Reddy, Guduru Ramakrishna and Singh, Harpreet and Domeika, Aurelijus and Manoj Kumar, Nallapaneni and Quanjin, Ma (2020) Modelling of heuristic distribution algorithm to optimize flexible production scheduling in Indian industry. In: Procedia Computer Science; 2019 International Conference on Computational Intelligence and Data Science, ICCIDS 2019 , 6 - 7 September 2019 , Gurugram, India. pp. 1120-1127., 167. ISSN 1877-0509

Reddy, K. Srinivasa and Murty, G.V. Ramana and Sharma, Korada Viswanatha (2011) Aerodynamic Studies in the Static Components of a Centrifugal Compressor Stage. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 75-86. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Reddy, Vennapusa Jagadeeswara and Hariram, N. P. and Maity, Rittick and Mohd Fairusham, Ghazali and Sudhakar, Kumarasamy (2023) Sustainable E-fuels: Green hydrogen, methanol and ammonia for carbon-neutral transportation. World Electric Vehicle Journal, 14 (12). pp. 1-29. ISSN 2032-6653. (Published)

Reddy, Vennapusa Jagadeeswara and Hariram, N. P. and Mohd Fairusham, Ghazali and Kumaramasy, Sudhakar (2024) Pathway to Sustainability: An Overview of Renewable Energy Integration in Building Systems. Sustainability, 16 (2). ISSN 2071-1050. (Published)

Reddy, Vennapusa Jagadeeswara and Mohd Fairusham, Ghazali and Sudhakar, Kumarasamy (2024) Advancements in phase change materials for energy-efficient building construction: A comprehensive review. Journal of Energy Storage, 81 (110494). ISSN 2352-152X. (Published)

Redhwan, A. A. M. and Azmi, W. H. and M. Z., Sharif and Nurul Nadia, Mohd Zawawi (2017) Thermal Conductivity Enhancement of Al2O3 and SiO2 Nanolubricants for Application in Automotive Air Conditioning (AAC) System. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01051). ISSN 2261-236X

Redhwan, A. A. M. and Azmi, W. H. and Najafi, G. and M. Z., Sharif and N. N. M., Zawawi (2019) Application of response surface methodology in optimization of automotive air-conditioning performance operating with SiO2/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1269-1283. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Rejab, Mohd Ruzaimi Mat (2018) Development of fibre metal laminate materials for automotive application. , [Research Report: Research Report] (Unpublished)

Rejab, Mohd Ruzaimi Mat (2017) Periodic two-dimensional self reinforced polypropylene honeycomb core for sandwich structures. , [Research Report: Research Report] (Unpublished)

Rejab, Mohd Ruzaimi Mat and Ishak, M. (2020) The mechanical behaviour of sandwich structure based on corrugated cores. , [Research Book Profile: Research Report] (Unpublished)

Reji, Kumar R and M., Samykano and W. K., Ngui and A.K., Pandey and Kalidasan, B and K., Kadirgama and V.V., Tyagi (2022) Investigation of thermal performance and chemical stability of graphene enhanced phase change material for thermal energy storage. Physics and Chemistry of the Earth, 128 (103250). pp. 1-7. ISSN 1474-7065. (Published)

Reji Kumar, R. and M., Samykano and A. K., Pandey and K., Kadirgama and Tyagi, V. V. (2022) A comparative study on thermophysical properties of functionalized and non-functionalized multi-walled carbon nano tubes (MWCNTs) enhanced salt hydrate phase change material. Solar Energy Materials and Solar Cells, 240 (111697). pp. 1-11. ISSN 0927-0248. (Published)

Reji Kumar, R. and M., Samykano and Pandey, A. K. and Said, Zafar and K., Kadirgama and Tyagi, V. V. (2022) Experimental investigations on thermal properties of copper (II) oxide nanoparticles enhanced inorganic phase change materials for solar thermal energy storage applications. In: 2022 Advances in Science and Engineering Technology International Conferences, ASET 2022 , 21-24 February 2022 , Dubai, UAE. pp. 1-6.. ISBN 978-166541801-0

Reji Kumar, R. and Pandey, A. K. and Samykano, M. and Aljafari, Belqasem and Ma, Zhenjun and Bhattacharyya, Suvanjan and Goel, Varun and Ali, Imtiaz and Kothari, Richa and Tyagi, V. V. (2022) Phase change materials integrated solar desalination system: An innovative approach for sustainable and clean water production and storage. Renewable and Sustainable Energy Reviews, 165 (112611). pp. 1-31. ISSN 1364-0321. (Published)

Reji Kumar, Rajamony (2023) Performance evaluation of photovoltaic thermal systems using functionalized multi-walled carbon-based nano-enhanced phase change material. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Reji Kumar, Rajamony and Mahendran, Samykano and Kumaran, Kadirgama and Pandey, Adarsh Kumar and Tyagi, V. V. (2020) Phase change materials and nano-enhanced phase change materials for thermal energy storage in photovoltaic thermal systems: a futuristic approach and its technical challenges. Renewable and Sustainable Energy Reviews, 133. pp. 1-34. ISSN 1364-0321. (Published)

Reji Kumar, Rajamony and Mahendran, Samykano and Pandey, A. K. and Kalidasan, B and Imtiaz, Ali Laghari and Kothari, Richa and Abusorrah, Abdullah M. and Sharma, Kamal and Tyagi, V. V. (2021) Utilization of solar energy for wastewater treatment: challenges and progressive research trends. Journal of Environmental Management, 297. pp. 1-23. ISSN 0301-4797. (Published)

Reyhaneh, Loni and Gholamhassan, Najafi and Rizalman, Mamat and Mohamed, Mazlan and Nor Azwadi, Che Sidik (2022) Nusselt number prediction for oil and water in solar tubular cavity receivers. Journal of Advanced Research in Numerical Heat Transfer, 97 (2). pp. 157-174. ISSN 2289-7879. (Published)

Reza, M. S. and S. N., Aqida and Mohd Toff, Mohd Radzi and Brabazon, D. (2013) Thermal Barrier Coatings on Laser Surface Modified AISI H13 Tool Steel Using Atmospheric Plasma Spray Technique. Key Engineering Materials, 554-55. pp. 603-610. (Published)

Reza, Alebrahim and Sallehuddin, Mohamed Haris and Nik Abdullah, Nik Mohamed and Shahrum, Abdullah (2015) Vibration Analysis of Self-Healing Hybrid Composite Beam Under Moving Mass. Composite Structures, 119. pp. 463-476. ISSN 0263-8223. (Published)

Reza, M. S. and S. N., Aqida and I., Ismail (2018) Laser surface modification of Yttria Stabilized Zirconia (YSZ) thermal barrier coating on AISI H13 tool steel substrate. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-4., 319 (1). ISSN 17578981

Rihayat, Teuku and Suryani, Salim and Fitriyani, C. N. and Aidy, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Synthesis and characterization of PLA-Chitosan-ZnO composite for packaging biofilms. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-9., 788 (012045). ISSN 1757-8981

Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Bio-Nanocomposite Polyurethane / Clay / Chitosan Paints that have thermal resistance and antibacterial properties for biomedical applications. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-9., 788 (012042). ISSN 1757-8981

Rihayat, Teuku and Suryani, Suryani and Hasanah, Uswatun and Nurhanifa, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Geraniol quality improvement on citronella oil as raw material for making anti-bacterial perfumes. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (012028). ISSN 1757-8981

Roduan, Siti Faqihah and Wahab, J. A. and Aiman, M. H. and Zaifuddin, A. Q. and Mohd Salleh, M. A. A. and Mahadzir, I. (2019) Effect of laser loop on surface morphology of copper substrate and wettability of solder joint. In: IOP Conference Series: Materials Science and Engineering; Electronic Packaging Interconnect Technology Symposium 2019, EPITS 2019 , 24 - 25 November 2019 , Penang. pp. 1-8., 701 (012040). ISSN 1757-8981

Romlay, Fadhlur Rahman Mohd Industrial testing of a 3-AXIS CNC Tailor Welded Blank laser welding machine using predefined closest-distance volume interpolator. , [Research Report: Research Report] (Unpublished)

Romli, N. K. and Rejab, M. R. M. and Jiang, X. X. and Soffie, S. M. and Ishak, M. (2022) Mechanical response of galvanised steel sandwich structure with different numbers of web core and different spacing distance of web plate under bending load. Journal of Mechanical Engineering and Sciences (JMES), 16 (4). 9289 -9306. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rosdi, Daud and A., Asyraf and Mas Ayu, Hassan and A., Shah (2019) Investigation on pullout strength between different design of cannulated pedicle screw and osteoporosis bones to obtain an optimum design. In: 4th International Conference on Advances in Manufacturing and Materials Engineering 2019 , 29 Oct.- 1 Nov. 2019 , Putrajaya International Convention Centre (PICC), Putrajaya. pp. 1-5.. (Unpublished)

Rosdi, Daud and Almor, A. A. and Mas Ayu, Hassan and M., Safwan and S.H., Tomadi and A., Shah (2020) Design optimization of lightweight lower control arm using finite element method. Test Engineering & Management, 83 (May-June 202). pp. 1285-1291. ISSN 0193-4120. (Published)

Rosdi, Daud and Daud, M. and Mas Ayu, Hassan and Shah, A. (2019) Design & analysis of ankle foot orthosis for assisting car driver after ankle surgery. In: International Conference on Informatics, Computing and Applied Mathematics (ICICAM2019) , 25-29 October 2019 , TH Hotel Kuala Terengganu, Teregganu, Malaysia. pp. 1-5.. (Unpublished)

Rosdi, Daud and Kae, W. Y. and Mas Ayu, Hassan and Shah, A. (2021) Effect of thread profile variation on pullout and bending strength of a pedicle screw. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-10., 1078 (1). ISSN 1757-899X

Rosdi, Daud and Kennedy, S. J. and Mas Ayu, Hassan and A., Shah (2021) Effect of thread profile on bending strength of pedicle screw. In: The International Postgraduate Conference on Mechanical Engineering (IPCME2021) , 10-14 Oct. 2020 , Universiti Malaysia Pahang, Pekan, Malaysia. pp. 1-7.. ISSN 1757-8981 (Print); 1757-899X (Online)

Rosdi, Daud and M., Syakir and Mas Ayu, Hassan and Arman Shah, Abdullah (2019) Finite element method study: the effect of insertion torque and angle on pedicle screw loosening. In: The 4th International Conference on Frontiers of Composite Materials , 13 - 16 November 2019 , The University of Queensland, Brisbane, Australia. pp. 1-10.. (Unpublished)

Rosdi, Daud and M. Z. H., Jantan and H. M., Ayu and A., Shah (2019) Investigation of Fatigue Failure Performance of Ankle Implant Mobile Bearing using Finite Element Method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference on Vibration, Sound and System Dynamics (ICVSSD 2019) , 1-3 December 2019 , Penang, Malaysia. pp. 1-9., 815 (012016). ISSN 1757-899X

Rosdi, Daud and Mas Ayu, Hassan and S., Izman and Mohammed Rafiq, Abdul Kadir and A., Shah and Mohd Faiz, Mohd Yusoff and M. W., Shamsiah and T. M., Yong and T., Kamarul (2014) Influence of Carbon Concentrations in Reducing Co and Cr Ions Release in Cobalt Based Implant: A Preliminary Report. Advanced Materials Research, 845. pp. 462-466. ISSN 1662-8985. (Published)

Rosdi, Daud and Mas Ayu, Hassan and Siti Haryani, Tomadi and Salwani, Mohd Salleh and S., Suaidah and Arman Shah, Abdullah and Mohammed Rafiq, Abdul Kadir (2018) Neural network as an assisting tool in designing talus implant. In: 6th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2017 and 2nd International Conference on Materials Technology and Applications, ICMTA 2017 , 26-27 October 2017 , Tokyo; Japan. pp. 153-160., 916. ISSN 0255-5476 ISBN 978-303571201-8

Rosdi, Daud and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Amir Putra, Md Saat and Muhammad Hisyam, Lee and Aminudin, Che Ahmad (2013) Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali. The Journal of Foot and Ankle Surgery, 52. pp. 426-431. ISSN 1067-2516. (Published)

Rosdi, Daud and Nurazlina, Sulaeman and Mas Ayu, Hassan and Arman Shah, Abdullah (2022) Prediction of Malaysian Talus Bone Morphology Using Artificial Intelligence. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer Science and Business Media Deutschland GmbH, Springer Link Malaysia, pp. 29-37. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)

Roshahliza, M. Ramli and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nurul Aqilah, Herman and Mohamad Syazwan, Mohd Roni and Amirul Hafiz, Zexafiza (2021) Unmanned ground vehicle for covid-19 waste management. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Roshahliza, M. Ramli and Nurul Aqilah, Herman and Muhammad Ridzuan, Mazlan and Azlin Suraya, Nazaruddin and Muhammad Arshad, Tuah and Abdul Naqib Eizzaz, Abd Samad and Kamal, Othman and Yanti Marliana, Esmail (2020) Development of Robotic Rover with Controller & Vision System. International Journal of Electrical Engineering and Computer Science, 18 (2). pp. 766-773. ISSN 2502-4752. (Published)

Roshahliza, M. Ramli and Nurul Aqilah, Herman and Muhammad Ridzuan, Mazlan and Azlin Suraya, Nazaruddin and Muhammad Arshad, Tuah and Abdul Naqib Eizzaz, Abd Samad and Kamal, Othman and Yanti Marliana, Esmail (2018) Development of robotic rover with controller & vision system. In: 3rd Engineering Technology International Conference (ETIC2018) , 15-16 August 2018 , Melaka International Trade Centre (MITC), Melaka. pp. 1-6..

Rosilawati, Rosedi (2017) Mesin potong daun mengkuang. Sinar Harian . p. 37.

Rosli, Danial N. and Rasid, Mohd Azri Hizami (2022) Modal analysis of an 8/6 pole switched reluctance motor core with different materials and assembly method using FEA. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 40-47. ISSN 2637-0883. (Published)

Rosli, M. Arif Fikri and Pandey, A. K. and Samykano, M. and Kadirgama, K. and George, Mathew and Saidur, R. and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Sharma, Kamal and Tyagi, V. V. (2022) Thermal conductivity, reliability, and stability assessment of phase change material (PCM) doped with functionalized multi-wall carbon nanotubes (FMWCNTs). Journal of Energy Storage, 50 (104676). pp. 1-11. ISSN 2352-152X. (Published)

Rosli, M. Arif Fikri and Pandey, A. K. and Samykano, M. and Sharma, Kamal and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Saidura, R. (2021) Thermal stability and light transmission capability of nano TiO2 enhanced phase change material as thermal energy storage. In: IOP Conference Series: Materials Science and Engineering; International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020) , 18 -19 December 2020 , Mathura, India. pp. 1-8., 1116 (012206). ISSN 1757-899X

Rosli, M. Arif Fikri and Samykano, M. and Pandey, A. K. and Kadirgama, K. and Reji Kumar, R. and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Tyagi, V. V. and Sharma, Kamal and Saidur, R. (2022) Recent progresses and challenges in cooling techniques of concentrated photovoltaic thermal system: A review with special treatment on phase change materials (PCMs) based cooling. Solar Energy Materials and Solar Cells, 241 (111739). pp. 1-33. ISSN 0927-0248. (Published)

Rosman, Razali (2009) Two stroke small engine test rig design and its engine performance analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rosmazi, Rosli and Musa, Mailah and Priyandoko, Gigih (2014) Active Suspension System for Passenger Vehicle using Active Force Control with Iterative Learning Algorithm. WSEAS Transactions on Systems and Control, 9. pp. 120-129. ISSN 1991-8763 (print); 2224-2856 (online). (Published)

Rosmazi, Rosli and Musa, Mailah and Priyandoko, Gigih (2014) Hardware-in-the-Loop Simulation for Active Force Control with Iterative Learning Applied to an Active Vehicle Suspension System. Applied Mechanics and Materials, 465-46. pp. 801-805. ISSN 1662-7482. (Published)

Rosmazi, Rosli and Zamri, Mohamed (2021) Optimization of modified Bouc–Wen model for magnetorheological damper using modified cuckoo search algorithm. Journal of Vibration and Control, 27 (17-18). pp. 1-12. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Rosmazi, Rosli and Zamri, Mohamed and Priyandoko, G. (2021) Semi active seat suspension system using modified intelligent active force control. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8498 -8504. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Rosniza, Mohd Taha (2013) UMP bantu industri automotif. Berita Harian .

Roziah, Zailan and Siti Nurzalikha, Zaini and Muhammad Ikram, Mohd Rashid and A. A., Razak (2017) Feasibility study of standalone PV-wind-diesel energy systems for coastal residential application in Pekan, Pahang. In: UTP-UMP Symposium on Energy Systems, SES 2017 , 26-27 September 2017 , Perak, Malaysia. 1 -6., 131 (02001). ISSN 2261-236X

Rozman, Mohd Tahar (2015) Characterization of titanium aluminide alloys synthesized by mechanical alloying technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

Ruhil Amal, Azmuddin and Ainul Azmin, Md Zamin and Hamizah, Zahari and Rahmah, Mokhtar and Fatin Aliana, Mohd Radzi and Daing Nafiz, Idris (2023) Analysing tertiary students’ reading proficiency of CEFR aligned texts via online discussion forum in a learning management system. Asian Journal of University Education, 19 (1). pp. 121-132. ISSN 1823-7797. (Published)

Rui Jin, Ho (2007) Motored test rig design and fabrication for small engine testing. Faculty of Mechanical Engineerin, University Malaysia Pahang.

Rusila Zamani, Abd Rashid and Norhasnidawani, Johari and Saiful Amri, Mazlan and Siti Aishah, Abdul Aziz and Nur Azmah, Nordin and Nurhazimah, Nazmi and S. N., Aqida and Mohd Aidy Faizal, Johari (2021) Effects of silica on mechanical and rheological properties of EPDM-based magnetorheological elastomers. Smart Materials and Structures, 30 (10). pp. 1-2. ISSN 0964-1726. (Published)

Rusli, Majuma and Mohamad Heerwan, Peeie and Ondong, Kerisvin and Othman, Abu Hassan (2023) Investigation of Brake Pad Wear Effect due to Temperature Generation Influenced by Brake Stepping Count on Different Road Terrains. Automotive Experiences, 6 (2). pp. 234-244. ISSN 2615-6202. (Published)

Rydzek, Gaulthier and Pakdel, Amir and Witecka, Agnieszka and Awang Shri, Dayangku Noorfazidah and Gaudière, Fabien and Nicolosi, Valeria and Mokarian-Tabari, Parvaneh and Schaaf, Pierre and Boulmedais, Fouzia and Ariga, Katsuhiko (2018) PH-Responsive saloplastics based on weak polyelectrolytes: From molecular processes to material scale properties. Macromolecules, 51 (12). pp. 4424-4434. ISSN 0024-9297. (Published)

S

S., Abdullah and Che Ku Eddy Nizwan, Che Ku Husin and M. F. M., Yunoh and M. Z., Nuawi and Z. M., Nopiah (2013) Fatigue Features Extraction of Road Load Time Data Using the S-Transform. International Journal of Automotive Technology, 14 (5). pp. 805-815. ISSN 1229-9138. (Published)

S., Aman and S. M., Zokri and I., Khan and Mohd Zuki, Salleh and Zulkhibri, Ismail (2018) MHD Flow of Casson Fluid with SA-Based Hybrid Nanofluid using Fractional Derivatives. In: 14th International Conference On Diffusion In Solids And Liquids - DSL2018 , 25-29 Jun 2018 , Amsterdam, The Netherlands. p. 1.. (Unpublished)

S., Asri and M. F., Othman and Abdul Adam, Abdullah and Z., Abdullah and Z., Azmi (2019) Analysis of Organic Germanium Ge-132 as Cetane Improver in Diesel Combustion Process. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6134-6145. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

S., Izman and M. A., Hassan and Mas Ayu, Hassan and Mohammed Rafiq, Abdul Kadir and Mohammed Ruslan, Abdullah and Mahmood, Anwar and A., Shah and R., Daud (2012) Effect of pretreatment process on thermal oxidation of biomedical grade cobalt based alloy. Advanced Materials Research, 399-401. pp. 1564-1567. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

S., Karimi and B., Ghobadian and G., Najafi and A., Nikian and R., Mamat (2014) Effect of Operating Parameters on Ethanol–Water Vacuum Separation in an Ethanol Dehydration Apparatus and Process Modeling with ANN. Chemical Product and Process Modeling, 9 (2). pp. 179-191. ISSN 2194-6159 (print); 1934-2659 (online). (Published)

S., Kassim and Hasliza, A. Rahim and P. J., Soh and Mohamedfareq, Abdulmalek and M., Jusoh and M. H., Jamaluddin and Nur Syahirah, Sabli and M. N., Yassin and T., Sabapathy and F. H., Wee and M. N., Osman and Noormariani, Ismail (2019) Flexible Co-Planar Waveguide (CPW)-fed y-shaped patch UWB antenna for off-body communication. In: Journal of Physics: Conference Series, The 1st International Conference on Education and Technology (ICETECH) , 8 August 2019 , Madiun, Indonesia. pp. 1-7., 1464 (012058). ISSN 1742-6596

S., Kesavarma and C. K., Kong and M., Samykano and K., Kadirgama and A. K., Pandey (2020) Bending properties of 3D printed coconut wood-PLA composite. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052031). ISSN 1757-8981

S., Shalbi and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2020) A Simulation on Desired Neutron Flux for The Boron Neutron Capture Therapy (BNCT) Purpose by Using Monte Carlo N-Particle (MCNPX). In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (062022). ISSN 1757-899X

S., Sharif and A. S., Ramli and A. Y. M., Said and Z., Karim and E. A., Rahim and Amiril Sahab, Abdul Sani (2019) Effect of cutting parameters on tool wear when trochoidal pocket milling Ti6Al4V. International Journal of Integrated Engineering, 11 (4). pp. 159-165. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2020) Solar photovoltaics in airport: Risk assessment and mitigation strategies. Environmental Impact Assessment Review, 84 (106418). pp. 1-11. ISSN 0195-9255. (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2021) Sustainability at airports: Technologies and best practices from ASEAN countries. Journal of Environmental Management, 299 (113639). pp. 1-15. ISSN 0301-4797. (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop and Solomin, Evgeny and I. M., Kirpichnikova (2020) Solar PV energy system in Malaysian airport: Glare analysis, general design and performance assessment. Energy Reports, 6. pp. 698-712. ISSN 2352-4847. (Published)

S., Sulaiman and S., Izman and M. B., Udaya and M. F., Omar (2022) Review on grain size effects on thermal conductivity in ZnO thermoelectric materials. RSC Advances, 12 (9). pp. 5428-5438. ISSN 2046-2069. (Published)

S. A., Che Ghani and Abdul Malek, Nor Mohd Syamsi and W. S., Wan Harun and Adnan, Zahrul and M. F. F., Ab Rashid and Ramli, Mohd Hazlen and Omar, Asnawi (2016) Finite Element Analysis of Porous Medical Grade Cobalt Chromium Alloy Structures Produced by Selective Laser Melting. Advanced Materials Research, 1133. pp. 113-118. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

S. A., Che Ghani and Kai, Cheng and Timothy, Minton (2013) Back Chip Temperature in Environmentally Conscious Turning with Conventional and Internally Cooled Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 4. pp. 356-372. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S. A., Che Ghani and Mohd Hafizu, Zakaria and W. S., Wan Harun and Zakri, Ghazalli (2017) Progressive Tool Flank Wear And Surface Roughness When Turning AISI 1017 Mild Steel Using Reduced Thickness Inserts In Finishing Cutting Conditions. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-5., 1901 (040003). ISBN 978-0-7354-1589-8

S. A., Che Ghani and Siti Rohaida, Mohamed and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2017) Physical Evaluations of Co-Cr-Mo Parts Processed using Different Additive Manufacturing Techniques. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100001). ISBN 978-0-7354-1589-8

S. A., Che Ghani and W. S., Wan Harun and M. F. F., Ab Rashid and Rasidi, Ibrahim (2015) Numerical Analysis of Internal Flow Embedded in a Cutting Tool. In: Proceedings of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. pp. 1-5..

S. H., Teo and Gan, Leong Ming (2015) Speeding Driving Behaviour: Age And Gender Experimental Analysis. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

S. I., Harun and Siti Rabiatull Aisha, Idris and N., Tamar Jaya (2017) A Study on The Development of Local Exhaust Ventilation System (LEV’s) for Laser Machine. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (1). ISSN 17578981

S. J., Teoh and R. A., Bakar and Gan, Leong Ming and Mustika, Yasti (2015) Conceptual Design and Performance Analysis of Parallel Drive-Train for Hybrid Electric Motorcycle. Applied Mechanics and Materials, 699. pp. 1-8. ISSN 1662-7482. (Published)

S. K., Abu Bakar and Rosdi, Daud and Mas Ayu, Hassan and Salwani, Mohd Salleh and A., Shah (2018) Prediction of fatigue failure location on lower control arm using finite element analysis (Stress Life Method). In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering , 14 - 15 November 2018 , Melaka, Malaysia. pp. 1-6.. (Unpublished)

S. K., Lim and Azmi, W. H. and A. R., Yusoff (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/Water-Ethylene Gylcol Mixture Nanocoolant for Cooling Channel of Hot-press Forming Die Application. International Communications in Heat and Mass Transfer, 78. pp. 182-189. ISSN 0735-1933. (Published)

S. K., Nayak and B., Nayak and P. C., Mishra and M. M., Noor and S., Nanda (2019) Effects of biodiesel blends and producer gas flow on overall performance of a turbocharged direct injection dual-fuel engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-20. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

S. K., Selvamani and W. K., Ngui and K., Rajan and M., Samykano and R., Reji Kumar and Badadhe, Avinash M. (2022) Investigation of bending and compression properties on PLA-brass composite using FDM. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103251). pp. 1-8. ISSN 1474-7065. (Published)

S. K. M., Saad and S. N. A. M., Zaini and M. Y., Abu (2022) Application of Mahalanobis-Taguchi System in Full Blood Count of Methadone Flexi Dispensing Program. Malaysian Journal of Applied Sciences, 7 (2). pp. 1-23. ISSN 0127-9246. (Published)

S. M., Asyraf and Mohamad Heerwan, Peeie and I. M., Izhar and I. M., Zulhilmi and J. M., Zikri and S. C., Hern (2018) Parameters estimation and calibration of bldc motor for electric powered wheelchair. In: International conference on science, engineering and technology (I-SET 2018) , 2 - 3 May 2018 , Convention Centre, University of Muhammadiyah (UNMUHA) Banda Aceh, Indonesia. pp. 1-7.. (Unpublished)

S. M., Asyraf and Mohamad Heerwan, Peeie and I. M., Zulhilmi and I. M., Izhar (2019) Plugging brake system as a hill descend control for electric powered wheelchair: Experimental analysis. In: IEEE International Conference on Advanced Robotics and Mechatronics (ICARM 2019) , 3-5 July 2019 , Toyonaka Campus, Osaka University, Japan. pp. 319-324.. ISBN 978-1-7281-0064-7

S. M., Azlan and Z., Shayfull and S. M., Nasir and Mohd Sazli, Saad and Mohd Rashidi, Maarof and M., Fathullah (2016) Analysis of Strength on Thick Plate Part using Genetic Algorithm Optimisation Method. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-11., 78 (01085). ISSN 2261-236X

S. M., Rosdi and R., Mamat and Alias, Azri and H., Hamzah and K., Sudhakar and Gholamhassan, Najafi and Farzad, Jaliliantabar (2019) Performance and emission of turbocharger engine using gasoline and ethanol blends. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-11., 863.

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. (2021) Effects of lean combustion on bioethanol-gasoline blends using turbocharged spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9140-9148. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. and I. M., Yusri (2019) Evaluation of properties on performance and emission to turbocharged SI engine using fusel oil blend with gasoline. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012113). ISSN 1757-899X

S. M., Rosdi and R., Mamat and M. H. M., Yasin and T. F., Yusaf and F., Khoirunnisa (2022) Experimental investigation on combustion behaviour, performance and emission of fusel oil-gasoline blends using turbocharged SI engine. Journal of Mechanical Engineering and Sciences (JMES), 16 (1). 8788 -8800. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S. M., Zokri and L. A., Aziz and N. S., Arifin and M. K. A., Mohamed and Mohd Zuki, Salleh and Abdul Rahman, Mohd Kasim and N. F., Mohammad (2017) Boundary Layer Flow of Jeffrey Fluid over a Stretching Sheet with Convective Boundary Conditions: Application in Polymer Processing. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 437-439. ISBN 9789670257884

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun (2013) Atomic Diffusion in Laser Surface Modified AISI H13 Steel. Applied Physics A, 112 (1). pp. 139-142. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

S. N., Aqida and Brabazon, Dermot and S., Naher (2013) An Investigation of Phase Transformation and Crystallinity in Laser Surface Modified H13 Steel. Applied Physics A, 110 (3). pp. 673-678. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

S. N., Aqida and Fauzun, Fazliana and Wahab, Md. Saidin (2013) Laser Surface Modification of AISI 1025 Low Carbon Steel using Pulsed Nd:YAG Laser for Enhanced Surface Properties. Key Engineering Materials , 554-55. pp. 596-602. (Published)

S. N., Aqida and L. H., Shah and Naher, S. and Brabazon, D. (2014) Rapid Solidification Processing and Bulk Metallic Glass Casting. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier Ltd, Singapore, pp. 69-88. ISBN 9780080965321

S. N., Aqida and Maurel, M and Brabazon, D. and Naher, Sumsun and Rosso, M (2009) Thermal Stability Of Laser Treated Die Material For Semi-Solid Metal Forming. International Journal of Material Forming, 2. pp. 761-764. (Published)

S. N., Aqida and Mohamed Reza Zalani, Mohamed Suffian and Mohd Toff, Mohd Radzi and Brabazon, D. (2014) Surface Morphology of Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating. In: 17th Annual Esaform Conference on Material Forming , 7-9 May 2014 , Dipoli Congress Centre, Espoo, Finland. pp. 1-8..

S. N., Aqida and Naher, Sumsun and Brabazon, Dermot (2011) Laser Surface Modification of H13 Die Steel using Different Laser Spot Sizes. 14th International ESAFORM Conference on Material Forming: AIP Conference Proceedings, 1353. pp. 1081-1086. (Published)

S. N., Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2019) Comparative power extraction analysis of novel nature inspired vertical axis wind turbines. In: UTP-UMP-VIT Symposium on Energy System 2019 , 1-2 October 2019 , UMP Pekan. p. 1.. (Unpublished)

S. N. A., Rosli and Norhaida, Ab. Razak and M. R., Mahazar and N. A., Alang (2023) Creep life prediction of P91 steel using omega method. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 303-314.. ISSN 2195-4356 ISBN 978-981191456-0

S. N. A. M., Zaini and Mohd Yazid, Abu and Nur Najmiyah, Jaafar and S. K. M., Saad (2023) Application of MT method of Mahalanobis-Taguchi system in methadone flexi dispensing program. Journal of Engineering and Technology, 14 (2). pp. 45-71. ISSN 2180-3811. (Published)

S. N. M., Zainon and W. H., Azmi (2021) Heat Transfer Performance of Green Bioglycol-Based TiO2–SiO2 Nanofluids. Journal of Heat Transfer, 143 (11). pp. 1-10. ISSN 0022-1481. (Published)

S. N. M., Zainon and W. H., Azmi (2021) Stability and thermo-physical properties of green bio-glycol based TiO2-SiO2 nanofluids. International Communications in Heat and Mass Transfer, 126 (105402). pp. 1-13. ISSN 0735-1933. (Published)

S. N. S., Jamaludin and M. I. A., Latiff and D. M., Nuruzzaman and N. M., Ismail and S., Basri (2020) Investigation on microstructure and hardness of nickel-alumina functionally graded material. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 127-132., 29 (Part 1). ISSN 2214-7853

S. S., Hoseini and G., Najafi and B., Ghobadian and H., Azimi-Nejadian and Hossein, Ahmadian (2020) Computational fluid dynamic modelling of NOx formation in diesel engine. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012067). ISSN 1757-8981 (Print), 1757-899X (Online)

S. S. K., Singh and S., Abdullah and Nik Abdullah, Nik Mohamed (2017) Markov Chain Application in Fatigue Reliability Analysis for Durability Assessment of a Vehicle Crankshaft. ARPN Journal of Engineering and Applied Sciences, 12 (6). 1991 -1996. ISSN 1819-6608. (Published)

S. W., Tan and Mohamad Fadli, Zolkipli and M., Rosyazwan and N., Hafizah and M., Shahrel (2015) Design And Development Of Wear Testing Analysis On Cylinder Head Valve. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 December 2015 , Universiti Malaysia Pahang (UMP). pp. 1-14.. (Unpublished)

S. Z. A., Sakinah and W. H., Azmi and J., Alias (2020) Characterization of TiO2 nanopaint for automotive application. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October. 2019 , Kuantan; Malaysia. pp. 1-8., 863 (1). ISSN 17578981

S. Z. A., Sakinah and Wan Azmi, Wan Hamzah and J., Alias (2023) Corrosion Performance of Nanopaint for Automotive Application. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 299-308.. ISSN 2195-4356 ISBN 978-981-19-4425-3

S.M., Asyraf and Mohamad Heerwan, Peeie and Muhammad Izhar, Ishak (2018) Skid control enhancement for small electric vehicle by using sliding mode control strategy. In: SICE International Symposium on Control Systems (SICE ISCS 2018) , 9-11 March 2018 , Setagaya Campus, Tokyo City University, Tokyo, Japan. pp. 151-156.. ISBN 978-490776458-6

S.N.R, Ramli and S. H. S. M., Fadzullah and Z., Mustafa and M. R. M., Rejab and M. Z., Hassan (2017) The effect of varying pressure on mechanical performance of pineapple leaf fiber reinforced poly lactic acid biocomposites. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 305-307. ISBN 9789670257884

S.N.S, Jamaludin and R. A., Bakar (2010) Experimental Performance Testing Of The Actuation Part Of Piezoelectric Generator For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Saad, Wasan Kadhim and Hashim, Yasir and Jabbar, Waheb A. (2020) Design and Implementation of Portable Smart Wireless Pedestrian Crossing Control System. IEEE Access, 8. pp. 106109-106120. ISSN 2169-3536. (Published)

Saedi, Azrin and Mohd Shahrin, Abu Hanifah and Hilmi Hela, Ladin and Mohamad Heerwan, Peeie and Halim, Ghafar (2022) DNR optimization for loss reduction and voltage stability considering EV charging load. In: 2022 IEEE International Conference on Power and Energy : Advancement in Power and Energy Systems towards Sustainable and Resilient Energy Supply, PECon 2022Pages 203 - 2082022; 9th IEEE International Conference on Power and Energy, PECon 2022 , 5 - 6 December 2022 , Langkawi, Kedah. pp. 351-355. (185592). ISBN 978-166540990-2

Saffirna, M.S. and Jiang, X.X. and M.R., M.Rejab and Lim, K.S and N.N., Guo and Wang, Bangle (2022) A study on simulation analysis for laser-welded I-core sandwich plate with different material properties and T-joint weld characteristic. In: 1st International Conference on Computations in Materials and Applied Engineering – 2021 , 10/05/2021 , Nehru Nagar, Ghaziabad, India. pp. 276-285., 51 (1). ISSN 2214-7853

Saffirna, Mohd Soffie Suppiah (2022) Study on failure maps of laser-welded I-core sandwich plates. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Safitri, Nelly and Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Jazuli, Muhammad and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Efficiency of photovoltaic technology for Citronella oil distillation. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Kuantan, Malaysia. pp. 1-9., 788 (012079). ISSN 1757-8981

Safril, . and Wan Azmi, Wan Hamzah and N. N. M., Zawawi and A. I., Ramadhan (2023) Tribology performance of TiO2-SiO2/PVE nanolubricant at various binary ratios for the automotive air-conditioning system. Automotive Experiences (AE), 6 (3). pp. 485-496. ISSN 2615-6636. (Published)

Safuan Fathy, Amran (2013) Pressure management in pipe distribution system at Kuantan district. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Safwan, Shalbi (2023) Study of boron neutron capture therapy components at thermal column for nuclear reactor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazlianie, Sazali).

Safwan, Shalbi and Norazlianie, Sazali and Muhammad Aliff Ashraff, Rosdi and Faridah, Mohamad Idris (2021) Study on mechanical and shielding properties of barite colemanite concrete. In: IOP Conference Series: Materials Science and Engineering, International Nuclear Science Technology and Engineering Conference (iNuSTEC 2020) , Selangor, Malaysia , 17-19 November 2020. pp. 1-10., 1106 (012009). ISSN 1757-899X

Safwan, Shalbi and Norazlianie, Sazali and Muhammad Aliff Ashraff, Rosdi and Faridah Mohamad, Idris (2021) Radiation measurement of boron neutron capture therapy research facility at T riga Mark-II research reactor Malaysia. IOP Conf. Series: Materials Science and Engineering, 1106 (012022). pp. 1-9. (Published)

Safwan, Shalbi and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2021) Measurement of neutron flux at thermal column using gold foil activation analysis and TLD detector: technical review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2 (83). pp. 25-43. ISSN 2289-7879. (Published)

Sahat, Idris Mat and At-Tasneem, Mohd Amin and Mu'Tasim, Muhammad Ammar Nik and Hassan, Wan Anuar Wan and Jamaludin, U. K. and Rosli, Rosmazi (2017) Optimization of the flow characteristic in various array arrangements of multiple picohydro power turbines. , [Research Report: Research Report] (Unpublished)

Sahat, Idris Mat and Oumer, Ahmed Nurye and Ahmad, Zulkifli and Rejab, Mohd Ruzaimi Mat (2019) Investigation of fibre reinforcement toward polymer production emphasizing fused deposition modelling. , [Research Report: Research Report] (Unpublished)

Sahid, N. S. M. and M. M., Rahman and K., Kadirgama and D., Ramasamy and Maleque, M. A. and M. M., Noor (2017) Experimental Investigation on the Performance of the TiO2 and ZnO Hybrid Nanocoolant in Ethylene Glycol Mixture towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sahu, Alok K. and K., Sudhakar (2017) Effect of UV exposure on bimodal HDPE floats for floating solar application. Journal of Materials Research and Technology. pp. 1-10. ISSN 2238-7854. (In Press / Online First) (In Press / Online First)

Sahu, Alok K. and Sudhakar, K. and Sarviya, R. M. (2019) Influence of U.V light on the thermal properties of HDPE/Carbon black composites. Case Studies in Thermal Engineering, 15 (100534). pp. 1-7. ISSN 2214-157X. (Published)

Sahu, Alok K. and Sudhakar, Kumarasamy and Sarviya, Rishindra Mohan (2020) U.V light effect on the mechanical behaviour of HDPE/Carbon black composites. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (012054). ISSN 1757-8981

Sahwal Waty, Marno (2010) Effects of hole taper on mild steel machining using injection flushing type of electrical discharge machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Saifudin, Razali (2012) Smoothing techniques and a spherical simplex unscented transformation in solving a SLAM problem. PhD thesis, Okayama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Saiful Anwar, Che Ghani and Siti Rohaida, Mohamed and Munirah, Sha’ban and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2020) Experimental investigation of biological and mechanical properties of CoCrMo based selective laser melted metamaterials for bone implant manufacturing. Procedia CIRP, 89. pp. 79-91. ISSN 2212-8271. (Published)

Saiful Norazwan , Mohd Ariffin (2008) Implementation of proportional integral derivative (PID) controller on coupled tank liquid system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sajith, Akhil Vinayak and Zakaria, M. A. and Baarath, K. and Anwar, P. P. Abdul Majeed (2021) A novel Bezier curve control point search algorithm for autonomous navigation using N-order polynomial search with boundary conditions. In: 2021 IEEE International Intelligent Transportation Systems Conference (ITSC) , 19-22 September 2021 , Indianapolis, IN, USA. 3884 -3889., 2021. ISSN 978-172819142-3

Sakib, Md. Nazmus and Asif Iqbal, AKM and Muhammad Nuruzzaman, Dewan (2021) Mechanical characterization of Carbon Fibre and Graphene Oxide Reinforced Epoxy Hybrid Composite. In: Lecture Notes in Mechanical Engineering. Lecture Notes in Mechanical Engineering book series (LNME . Springer Singapore, https://link.springer.com/bookseries/11236, pp. 155-161. ISBN 978-981-15-9505-9

Sakib, Md. Nazmus and Iqbal, AKM Asif (2021) Epoxy based nanocomposite material for automotive application- a short review. International Journal of Automotive and Mechanical Engineering, 18 (3). pp. 9127-9140. ISSN 2229-8649. (Published)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M., Samykano and W. S., Wan Harun and R., Saidur (2019) Statistical approach for prediction of thermal properties of CNC and CNC-CuO nanolubricant using Response Surface Methodology (RSM). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-14., 788 (012016). ISSN 1757-899X

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and Amirruddin, Abdul Kadir and G., Najafi and M. M., Rahman (2017) Waste Cooking Oil Blended With The Engine Oil For Reduction of Friction and Wear On Piston Skirt. Fuel, 205. pp. 247-261. ISSN 0016-2361. (Published)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and N. W., Awang and Mohd Kamal, Kamaruzzaman (2023) Prediction and Optimization of Thermophysical Properties of Hybrid Cellulose Nanocrystal-Copper (II) Oxide Nanolubricant for Tribology Application. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 325-340.. ISBN 978-981-19-4425-3

Sakinah, Hisham and Kadirgama, Kumaran and Alotaibi, Jasem Ghanem and Alajmi, Ayedh Eid and Ramasamy, Devarajan and Norazlianie, Sazali and Mohd Kamal, Kamarulzaman and Yusaf, T. and Samylingam, L. and Aslfattahi, Navid and Kok, Chee Kuang (2024) Enhancing stability and tribological applications using hybrid nanocellulose-copper (II) oxide (CNC-CuO) nanolubricant: An approach towards environmental sustainability. Tribology International, 194 (109506). pp. 1-15. ISSN 0301-679X. (Published)

Sakinah, Muhamad Hisham (2022) Thermophysical properties and tribological behavior of hybrid cellulose nanocrystal copper (ii) oxide (cnc-cuo) as lubricant additives. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Sakinah, Muhamad Hisham (2017) Tribological behavior of waste cooking oil blended lubricant. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sakinah, Muhamad Hisham and Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Rahman and M. M., Noor (2016) The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil. Advances in Tribology, 2016 (654590). pp. 1-11. ISSN 1687-5915. (Published)

Sakinah, Muhamad Hisham and K., Kadirgama and H. M., Asnida and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Optimization On Wear Performance of Waste Cooking Oil As Engine Additive Using RSM (First Order Model). In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Sakinah, Muhammad Hisham and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and R., Saidur (2020) Enhancement of Tribological Behaviour and Thermal Properties of Hybrid Nanocellulose/Copper (II) Oxide Nanolubricant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 47-54. ISSN 2289-7879. (Published)

Sakundarini, Novita and Zahari, Taha and Raja Ariffin, Raja Ghazillaa and Salwa Hanim, Abdul Rashid and Gonzales, Julirose (2012) A framework of integrated recyclability tools for automobile design. International Journal of Industrial Engineering, 19 (10). pp. 401-411. ISSN 1943-670X. (Published)

Salaam, Hadi Abdul and Zahari, Taha and Daniyal, Hamdan and Romli, Awanis and Che Lah, Nurul Akmal and Shaharudin, Mohd Ali Hanafiah (2020) Development of sustainability optimization tool for pneumatic connector product. , [Research Report: Research Report] (Unpublished)

Saleem, Ali Ba and R., Mamat and Hagos, F. Y. and Abdul Adam, Abdullah and A., Arman (2021) Investigation of the stability of cerium oxide in diesel fuel for nano-enhanced fuel formulation. In: 2nd Energy Security and Chemical Engineering Congress (ESChE 2021 ) , 3-5 November, 2021 , Universiti Malaysia Pahang, Kampus Gambang.. pp. 1-8.. ISBN AIPCP22-AR-ESCHE2021-00024

Salikandi, Mohammad and Ranjbar, Benyamin and Shirkhan, Elahe and Priya, S. Shanmuga and Thirunavukkarasu, I. and Sudhakar, K. (2020) Recent trends in liquid desiccant materials and cooling systems : application, performance and regeneration characteristics. Journal of Building Engineering, 33 (101579). pp. 1-15. ISSN 2352-7102. (Published)

Salman, Razeni (2009) Liquid level control of a couple tank system based on smooth trajectory tracking using PID controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Salman, Abdulaziz Abdo Saif and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Muhammad Amirul, Abdullah and Abdul Majeed, Anwar P.P. (2022) The diagnostics of osteoarthritis : A fine-tuned transfer learning approach. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 455-461., 429 LNNS (276219). ISSN 23673370 ISBN 978-303097671-2

Salman, Ahmad and Razman, Mat Tahar (2013) Can Malaysia Meet Its Renewable Power Plant Expansion Target by 2015? Evidence from System Dynamics Model. International Journal of Technology Management, 2. pp. 37-40. ISSN 2289-2753. (Published)

Salvinder, Singh and Shahrum, Abdullah and Nik Abdullah, Nik Mohamed and Mohd Salmi, Mohd Noorani (2015) Markov Chain Modelling of Reliability Analysis and Prediction under Mixed Mode Loading. Chinese Journal of Mechanical Engineering, 28 (2). pp. 307-314. ISSN 1000-9345. (Published)

Salvinder Singh, Karam Singh and Shahrum, Abdullah and Nik Abdullah, Nik Mohamed (2015) Reliability Analysis and Prediction of Time to Failure Distribution of an Automobile Crankshaft. Maintenance and Reliability, 17 (3). pp. 408-415. ISSN 1507-2711. (Published)

Salwani, Md Zain (2016) Peranti penyejuk. Sinar Harian .

Salwani, Mohd Salleh and Aidy, Ali and Sahari, B. B. and Nuraini, A. A. (2016) Effect of automotive side member materials on the head injury criteria (HIC) and chest severity index (CSI) of adult passenger. International Journal of Engineering and Technologies, 7. pp. 47-59. ISSN 2297-623X. (Published)

Salwani, Mohd Salleh and B. B., Sahari and A., Ali and A. A., Nuraini (2014) Energy Absorption of Partially Filled Side Member Subjected to Oblique Crash. Applied Mechanics and Materials, 564. pp. 38-41. ISSN 1662-7482. (Published)

Salwani, Mohd Salleh and B. B., Sahari and Aidy, Ali and A. A., Nuraini (2014) The Effect of Automotive Side Member Filling on Car Frontal Impact Performance. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 873-880. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Salwani, Mohd Salleh and Barkawi, Sahari and Aidy, Ali and Mas Ayu, Hassan and Rosdi, Daud (2016) Correlations Between Axial and Oblique Loaded Column. In: Conference On Design, Materials and Manufacturing , 25-27 March 2016 , Kuala Lumpur. . (Unpublished)

Salwani, Mohd Salleh and M.S., Husaini (2015) Strain-Rate Sensitivity of Boron Alloyed Steel. In: Automotive Vehicle Technologies Conference 2015 , 23-25 November 2015 , Taksim, Istanbul. p. 1.. (Unpublished)

Salwani, Mohd Salleh and Mohamad Hisyam, K. (2020) Crash Performance of Double Hat Column Subjected to Compression Loading. In: IOP Conference Series: Materials Science and Engineering, 6th International Conference on Advances in Mechanical Engineering (ICAME 2019) , 14-16 August 2019 , Kota Kinabalu, Sabah, Malaysia. pp. 1-5., 834 (012050). ISSN 1757-899X

Salwani, Mohd Salleh and Mohammad Raffik, Khiyon (2016) Effect of Heat-Treatment on the Hardness and Mechanical Properties of Boron Alloyed Steel. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-6..

Salwani, Mohd Salleh and Muhammad Aiman, S. (2015) Energy Absorption Capability of Stainless Steel Type 304 and Type 316. In: International Conference on Intelligent Computing, Mechanical and Production Processes 2015 , 23-24 Sept 2015 , Penang. . (Unpublished)

Salwani, Mohd Salleh and Razali, Hafsham and Mas Ayu, Hassan and Rosdi, Daud (2017) Flexural Performance of the Heat-Treated Boron Alloyed Steel. In: Asia Conference on Mechanical and Manufacturing Engineering , 9-11 June 2017 , Tokyo University, Japan. pp. 21-26., 909. ISSN 02555476 ISBN 9783035712919

Salwani, Mohd Salleh and Sahari, B. B. and Aidy, Ali and Nuraini, A. A. (2014) Assessment Of Head Injury Criteria And Chest Severity Index For Frontal Impact. pp. 1-7. (Published)

Salwani, Mohd Salleh and Wan Fathin, Nazirrudidin (2008) The Influence of Cutting Condition on Surface Roughness in Face Milling Of Mild Steel. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 127-134. ISSN 1985-5176. (Published)

Samani, Marziyeh Ansari and Samani, Bahram Hosseinzdeh and Lotfalian, Amin and Rostami, Sajad and Najafi, Gholamhassan and Fayyazi, Ebrahim and R., Mamat (2020) The feasibility and optimization of biodiesel production from Celtis australis L. oil using chicken bone catalyst and ultrasonic waves. Biofuels, 11 (4). pp. 513-521. ISSN 1759-7269(Print); 1759-7277(Online). (Published)

Samykano, M. (2021) Mechanical property and prediction model for FDM-3D printed polylactic acid (PLA). Arabian Journal for Science and Engineering, 46 (8). pp. 7875-7892. ISSN 1319-8025 (print); 2191-4281 (online). (Published)

Samykano, M. (2021) Progress in one-dimensional nanostructures. Materials Characterization, 179 (111373). pp. 1-35. ISSN 1044-5803. (Published)

Samykano, M. and Nagarajan, T. and Majdi, . and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM. , [Research Report: Research Report] (Unpublished)

Samykano, M. and Rahman, M. M. and Nurul Akmal, Che Lah and Ngui, Wai Keng and Ramli, Junid Effect of solution concentration and temperature on the growth of ferromagnetic nanowires during electrodeposition. , [Research Book Profile: Research Report] (Unpublished)

Samykano, M. and Rahman, M. M. and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Reza, M. S. and Harun, W. S W and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system. , [Research Report: Research Report] (Unpublished)

Samykano, Mahendran (2023) Hybrid photovoltaic thermal systems : Present and future feasibilities for industrial and building applications. Buildings, 13 (1950). pp. 1-32. ISSN 2075-5309. (Published)

Samykano, Mahendran (2022) Role of phase change materials in thermal energy storage : Potential, recent progress and technical challenges. Sustainable Energy Technologies and Assessments, 52 (102234). pp. 1-29. ISSN 2213-1388. (Published)

Samykano, Mahendran and Fazli, Ismail and Chander, Sawalingam Thinesh (2011) Development of micro EDM with directly mounted APA 400MML actuator. Advanced Materials Research, 314-316. pp. 1811-1817. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Samykano, Mahendran and Santhip, - and W. K., Ngui and K., Sudhakar and K., Kadirgama and A. G. N., Sofiah (2018) Magnetic nanowires (Ni) via chemical reduction method. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-8.. (Unpublished)

Samykano, Mahendran and Selvamani, Sathish Kumar and K., Kadirgama and W. K., Ngui and Kanagaraj, G. and K., Sudhakar (2019) Mechanical property of FDM printed ABS : influence of printing parameters. International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 2779-2796. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Liew, Kia Wai and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . and Sivaraos, Subramaniam (2024) Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 1-18. ISSN 2756-8210. (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . (2024) Green Engineering with Nanofluids: Elevating Energy Efficiency and Sustainability. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 19-34. ISSN 2756-8210. (Published)

Samylingam, Lingenthiran and Kadirgama,, Kumaran and Aslfattahi, Navid and Samykano, M. (2022) Comparison of physical properties enhancement in various heat transfer nanofluids by MXene. In: Advances in Nanofluid Heat Transfer. Elsevier, Saudi Arabia, pp. 131-150. ISBN 9780323886420 (Printed) 9780323886567 (Online)

Sandanamsamy, L. and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Investigation of mechanical properties of 3d-printed polylactic acid (PLA). In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 69..

Sanderasagran, A. N. and Azizuddin, Abd Aziz and Daing Mohamad Nafiz, Daing Idris (2020) Real-time computational fluid dynamics flow response visualisation and interaction application based on augmented reality. Journal of Information and Communication Technology, 19 (4). pp. 559-581. ISSN 1675-414X (Print); 2180-3862 (Online). (Published)

Sanderasagran, A. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Idris, Mat Sahat (2022) Alternative method of nature inspired geometrical design strategy for drag induced wind turbine blade morphology. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). pp. 9759-9772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sanderasagran, Ashwindran Naidu and Azizuddin, Abd Aziz and Oumer, Ahmed Nurye (2021) Novel bio-hybrid drag induced wind turbine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and M., Samykano and W. S. W., Harun and G., Najafi and M., Mofijur and Mohamed, Mazlan (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: Preparation, characterization, and thermophysical properties. Sustainable Energy Technologies and Assessments, 44 (101508). pp. 1-24. ISSN 2213-1388. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids – a systematic overview. Ultrasonics Sonochemistry, 73 (105479). pp. 1-16. ISSN 1350-4177. (Published)

Sangeetha, Govindasamy (2012) Optimization of grinding parameter when grind haynes 242 using water based titanium oxide (TiO2) nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sani, M. S. M. and Abdul Wahab, M. A. and Abdullah, N. A. Z. and Asri, M. N. A. M. (2022) Structural dynamic analysis of a frame structure with different sets of bolted joints. In: AIP Conference Proceedings; 2nd International Colloquium on Computational & Experimental Mechanics, (ICCEM 2021) , 29-30 July 2021 , Online. pp. 1-8., 2545 (0200020). ISSN 0094-243X

Sani, M. S. M. and Abdullah, N. A. Z. and Asri, M. N. A. M. (2022) Variance analysis of dynamic properties for multiple top-hat section crash box structure. In: AIP Conference Proceedings; 2nd International Colloquium on Computational & Experimental Mechanics, (ICCEM 2021) , 29-30 July 2021 , Online. pp. 1-7., 2545 (020027). ISSN 0094-243X

Sani, M. S. M. and Wei, J. X. and Asri, M. N. A. M. and Abdullah, N. A. Z. (2022) Investigation on vibration analysis of beam structure with different types of joints. In: AIP Conference Proceedings; 2nd International Colloquim on Computational & Experimental Mechanics, (ICCEM) 2021 , 29 - 30 July 2021 , Online. pp. 1-11., 2545 (020016). ISSN 0094-243X

Sani, M. S. M. and Zikri, J. M. and Abdullah, A. A. (2022) Noise emission analysis in diesel engine with the palm oil methyl ester as a substitution fuel. In: AIP Conference Proceedings; 2nd International Colloquium on Computational and Experimental Mechanics, ICCEM 2021 , 29 - 30 July 2021 , Virtual, Online. pp. 1-8., 2545 (020015). ISSN 0094-243X

Sani, M. S.M. and Ghazali, M. F. and Baharom, Mohamad Zairi and Yusof, Mohd Fadhlan M. and Rahman, M. M. (2013) A new algorithm to identify nonlinear vibration of car body in white (BIW) structure. , [Research Book Profile: Research Report] (Unpublished)

Sani, M.S.M. and Asri, M. N. A. M. and Abdullah, N. A. Z. (2022) The effect of model updating of crash box structures with trigger mechanisms towards the crashworthiness output of the structures. In: AIP Conference Proceedings; 2nd International Colloquium on Computational and Experimental Mechanics, ICCEM 2021 , 29 - 30 July 2021 , Virtual, Online. pp. 1-10., 2545 (020014). ISSN 0094-243X ISBN 978-073544227-6

Santhana Julias, Henry (2010) Modal analysis for small engine crankshaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Santhi, U. and W. K., Ngui and Mahendran, Samykano and K., Sudhakar and K., Kadirgama and A. G. N., Sofiah (2019) Cobalt nanowires: advancing into future nanomaterial. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020006). ISBN 978-0-7354-1787-8

Santoso, W. B. and Ariyono, S. (2010) Combustion Characteristics Of A Diesel- Hydrogen Dual Fuel Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . ISBN 978-967-0120-04-1

Saptaji, Kushendarsyah (2016) Micro-Milling of Thin Mould for Continuous Productions of Polymer Microfluidic Devices. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14225-14230. ISSN 1819-6608. (Published)

Saptaji, Kushendarsyah and Mebrahitom, A. and Azmir, Azhari (2018) Machining of biocompatible materials: a review. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2255-2292. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Saptaji, Kushendarsyah and Subbiah, Sathyan (2017) Burr Reduction of Micro-milled Microfluidic Channels Mould Using a Tapered Tool. Procedia Engineering, 184. pp. 137-144. ISSN 1877-7058. (Published)

Saptaji, Kushendarsyah and Subbiah, Sathyan (2016) Finite Element Study on The Effect of Substrate Properties in Micro-cutting Thin Workpiece Materials. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-11., 114 (012005).

Sarad, S. Naga and Raju, A.V. Sita Rama and Radha, K. Kalyani and Sunder, L. Syam (2012) Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 797-810. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Response Surface Methodology to Predict the Effects of Graphene Nanoplatelets Addition to Diesel Engine Performance. In: International Conference on Alternative Fuels and Electric Vehicles 2021 , 9-10 December 2021 , Pune, India (Virtual). .

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) A Review of fuel additives' effects and predictions on internal combustion engine performance and emissions. AIMS Energy. (In Press / Online First) (In Press / Online First)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on Graphene Application: Focus on Application as Additive in Internal Combustion Engine. In: International Conference on Technical and Vocational Education and Training (IConTVET 2021) , 4-5 February 2021 , Langkawi (Virtual Mode). . (Unpublished)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on The Effect of Alcohol Usage as A Fuel Additive in Internal Combustion Engine. International Journal of Advanced Trends in Computer Science and Engineering, 10 (6). pp. 3165-3172. ISSN ISSN 2278-3091. (Published)

Sardjono, Ratnaningsih Eko and Gunawan, Ramdhan and Kadarohman, Asep and Erdiwansyah, E. and Rizalman, Mamat and Melati, Khairuddean (2024) Nanostarch based nanoencapsulation of Mucuna pruriens extract and its evaluation as anti-parkinsonian drug. Case Studies in Chemical and Environmental Engineering, 9 (100562). pp. 1-9. ISSN 2666-0164. (Published)

Sari, Alvika Meta and Ramadhan, Anwar Ilmar and Wan Hamzah, Azmi and Rahardja, Istianto Budhi and Hendrawati, Tri Yuni and Umar, Efrizon and Salsabila, Mutiara (2022) The effect of ultrasonication temperature on yield nanocellulose powder from empty palm oil bunches. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 223..

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Praja, Arief Kusuma Among (2023) Project delivery systems : The partnering concept in integrated and non-integrated construction projects. Sustainability (Switzerland), 15 (86). pp. 1-14. ISSN 2071-1050. (Published)

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Tamin, Rizal Zainuddin and Praja, Arief Kusuma Among and Dewi, Maya Puspita (2023) Challenge and awareness for implemented integrated project delivery (IPD) in indonesian projects. Buildings, 13 (262). pp. 1-13. ISSN 2075-5309. (Published)

Sarmilaah Dewi, Subramaniam and Siti Hajar, Abd Rahim and Luqman, Abdul Halim and Firdaus, Basrawi and Nurul Aini, Mohd Azman (2023) Study on bee bread extracts as active ingredients in SGC-Active film for food packaging application. Materials Today: Proceedings, 86. pp. 1-8. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Sasikumar, Subramaniam Babu and Santhanam, Harikrishnan and M. M., Noor and Devasenan, Madhesh and Hafiz, Muhammad Ali (2020) Experimental investigation of parallel type evacuated tube solar collector using nanofluids. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-13. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Sathuramalingam, Pillay Darminesh and Nor Azwadi, Che Sidik and G., Najafi and R., Mamat and Tan, Lit Ken and Yutaka, Asako (2017) Recent Development on Biodegradable Nanolubricant: A Review. International Communications in Heat and Mass Transfer, 86. pp. 159-165. ISSN 0735-1933. (Published)

Saxena, Anupama Khare and Saxena, Seema and Sudhakar, K. (2021) Energy, economic and environmental performance assessment of a grid-tied rooftop system in different cities of India based on 3E analysis. Clean Energy, 5 (2). 288 -301. ISSN 2515-4230. (Published)

Sazwan, Sahar (2013) Design and analysis of the test section for an open channel flow flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Selvakumar, Raja Saravana Kumar (2012) Design of multiple microcontrollers platform for use in academic environment. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ghazali, Kamarul Hawari).

Selvamani, Sathish Kumar (2019) Mechanical behaviour of acrylonitrile butadiene styrene (ABS) specimen by fused deposition modelling (FDM). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, A/L Samykano).

Selvamani, Sathish Kumar and Nuurul Syahierah, Othman and M. Z. A., Zulkifle and Keresnan, Khaliswaran (2016) Design And Development Of Library Anti-Theft System. Mechanical System Design. pp. 1-15. (Published)

Semin, Semin (2011) Development of new injector for compressed natural gas engine and the effect on performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Semin, Semin and Baheramsyah, Alam and Amiadji, Amiadji and Abdul Rahim, Ismail (2011) Effect of dry ice application in fish hold of fishing boat on the fish quality and fisherman income. American Journal of Applied Sciences, 8 (12). pp. 1263-1267. ISSN 1546-9239. (Published)

Seow, Kok Foo (2013) Development of archery test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shafiq, Suhaimi and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Nik Rosli, Abdullah (2014) Investigation of Intake Flow Rate and Swirl Motion of Sl engine. Applied Mechanics and Materials, 465-46. pp. 409-417. ISSN 1662-7482. (Published)

Shafiq, Suhaimi and R., Mamat and Nik Rosli, Abdullah (2013) Investigation of the Effects of Inlet System Configuration on the Airflow Characteristics. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Shah, Syed Nadeem Abbas and Shahabuddin, Syed and Mohd Faizul, Mohd Sabri and Mohd Faiz, Mohd Salleh and Mohamad Azlin, Ali and Hayat, Nasir and Nor Azwadi, Che Sidik and Mahendran, Samykano and Saidur, R. (2020) Experimental investigation on stability, thermal conductivity and rheological properties of rGO/ethylene glycol based nanofluids. International Journal of Heat and Mass Transfer, 150 (118981). pp. 1-20. ISSN 0017-9310. (Published)

Shah Izwandi, Mohd Zawawi (2008) Optimization of turning parameters using genetic algorithm method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahed, Chowdhury Ahmed and Faiz, Ahmad and Günister, Ebru and Farhana, Mohd Foudzi and Ali, Saad and Malik, Khurshid and Wan Sharuzi, Wan Harun (2023) Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys : A review. Journal of Magnesium and Alloys. pp. 1-21. ISSN 2213-9567. (Published)

Shahrinnahar, Latib (2014) Komersial bidang automatif, teknologi hijau. Utusan Malaysia . p. 26.

Shahrizal, Ibrahim (2012) Experimental evaluation of heat flow from rectangular fins array under forced convection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahrul Faiz, Sabir Ahmad (2008) Rostrum system for automated height adjustment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shakil, Usaid Ahmed and Mohd Ruzaimi, Mat Rejab and Norazlianie, Sazali and Shukur, Abu Hassan and Mohd Yazid, Yahya and Ma, Quanjin (2023) Damage characterisation of amine-functionalized MWCNT reinforced carbon/epoxy composites under indentation loading. Journal of Materials Research and Technology, 24. pp. 6713-6729. ISSN 2238-7854. (Published)

Shalfarina, Shahriman (2015) Penerbit dan FKM anjur Bengkel Penilaian Jurnal Scopus UMP. CREATE . p. 15. ISSN 1823-7487

Shamsu Anuar, Mohamad Aqil and Mansor, M. A. (2022) Application of value stream mapping in the automotive industry: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 34-41. ISSN 2636-9575. (Published)

Shamsul Nizam, Mohd Yusof@ Hamid (2008) Developing LQR to control speed motor using matlab GUI. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Shamsul Shahril, Mat Yunus (2008) Effects of flushing on electro-discharge machined surface. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shanono, Ibrahim Haruna and Muhammad, Aisha (2021) Hybrid electric vehicles: a mini overview. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 27-36. ISSN 2636-9575. (Published)

Shanono, Ibrahim Haruna and Nor Rul Hasma, Abdullah and Nur Fajrina, Mohd Noh and Muhammad, Aisha (2022) Distribution network reconfiguration for transmission loss minimization and voltage profile Improvement using salp swarm optimization algorithm. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1103-1123., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6

Sharif, M. Z. and Azmi, W. H. and Zawawi, N. M. M. and R., Mamat and Hamisa, A. H. (2020) R1234yf vs R134a in automotive air conditioning system: A comparison of the performance. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-10., 863 (012049). ISSN 1757-8981 (Print), 1757-899X (Online)

Sharif, M.Z. and Wan Azmi, Wan Hamzah and N. N, M. Zawawi and Mohd Fairusham, Ghazali (2022) Comparative air conditioning performance using SiO2 and Al2O3 nanolubricants operating with Hydrofluoroolefin-1234yf refrigerant. Applied Thermal Engineering, 205. pp. 1-13. ISSN 1359-4311. (Published)

Sharifah Maszura, Syed Mohsin and M. S., Zainal and Jokhio, Gul A. and Khairunisa, Muthusamy (2017) Behaviour of Hybrid Fibers in Oil Palm Shell and Palm Oil Fuel Ash Reinforced Concrete Beam. In: Proceedings of Mechanical Engineering Research Day 2017 (MERD'17) , 30 March 2017 , Melaka, Malaysia. pp. 391-392.. ISBN 978-967-0257-88-4

Sharifah Noor Shahirah, Syed Mohd Nordin (2007) Cutting force of end cutting tool milling machining. Faculty of Mechanical Engineering, Universiti Malaysia pahang.

Sharifah Norsakinah, Syed Zainal Abidin and Wan Hamzah, Azmi and Ramadhan, Anwar Ilmar and Nurul Nadia, Mohd Zawawi (2022) Comprehensive review of nanoparticles dispersion technology for automotive surfaces. Automotive Experiences, 5 (3). pp. 304-327. ISSN 2615-6202. (Published)

Sharma, Korada Viswanatha (2010) Application Of Design Patterns And Space Concepts In The Development Of Heat Pipes. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Sharma, Korada Viswanatha and L. Syam, Sundar (2011) Laminar Convective Heat Transfer And Friction Factor Of AL2O3 Nanofluid In Circular Tube Fitted With Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan-Ju). pp. 265-278. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Shathiswara Rao, Subramaniam (2019) Influence of 3D printing parameters on mechanical behaviour of polylactic acid (PLA) specimen utilizing FDM technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Shazril, Shaedi (2013) Lead acid battery management system for solar harvesting system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Sheh, Hong Lim and Mohd Azrul Hisham, Mohd Adib and Mohd Shafie, Abdullah and Nur Hartini, Mohd Taib and Radhiana, Hassan and Azian, Abd Aziz (2020) Study of extracted geometry effect on patient-specific cerebral aneurysm model with different threshold coefficient (Cthres). CFD Letters, 12 (10). pp. 1-14. ISSN 2180-1363. (Published)

Shehzad, Aamir and Ahmed, Arslan and Quazi, M. M. and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Masjuki, Haji Hassan and Muhammad Asif Javed, Hafiz (2021) Current research and development status of corrosion behavior of automotive materials in biofuels. Energies, 14 (5). pp. 1-36. ISSN 1996-1073. (Published)

Sheng, Annie Lau and I., Ismail and S. N., Aqida (2018) Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Sheng, Annie Lau and Izwan, Ismail and Fazliana, Fauzun and S. N., Aqida (2019) Surface Roughness of Laser Modified Die Surface Change Under Thermal Cyclic Loading. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 441-447.. ISBN 978-981-15-0950-6

Shing Shian, Ng and Nur Azhani, Abd Razak (2013) Investigation of Mig Welding to Corrosion Behavior of Heat Treated Carbon Steel. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Shukla, Akash Kumar and K., Sudhakar and Prashant, Baredar and R., Mamat (2017) BIPV in Southeast Asian countries-opportunities and challenges. Renewable Energy Focus, 21. pp. 25-32. ISSN 1755-0084. (Published)

Shukla, Akash Kumar and Sudhakar, K. and Baredar, Prashant and R., Mamat (2018) BIPV based sustainable building in South Asian countries. Solar Energy, 170. pp. 1162-1170. ISSN 0038-092X. (Published)

Shukla, Akash Kumar and Sudhakar, K. and Baredar, Prashant and R., Mamat (2017) BIPV in Southeast Asian Countries – Opportunities and Challenges. Renewable Energy Focus, 21. pp. 25-32. ISSN 1755-0084. (Published)

Shukla, Akash Kumar and Sudhakar, K. and Baredar, Prashant and R., Mamat (2018) Solar PV and BIPV system: Barrier, challenges and policy recommendation in India. Renewable and Sustainable Energy Reviews, 82 (Part 3). pp. 3314-3322. ISSN 1364-0321. (Published)

Sia, Lih Yin (2010) Wall avoiding balbot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Sin Jian, E. L. and Rosdi, Daud and Mas Ayu, Hassan and M. H., Yusoff and Jamiluddin, Jaafar and A., Shah (2018) Application of a finite element method to predict fatigue life of the knee mobile bearing. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018; Universiti Malaysia Pahang , 31 October 2018 , UMP Pekan, Pahang. p. 1., 469 (1). ISSN 17578981

Singh, J. and Singh, R. and Kumar, R. and M. M., Rahman and Ramakrishna, S. (2019) PLA-PEKK-HAp-CS composite scaffold joining with friction stir spot welding. Journal of Thermoplastic Composite Materials, 34 (6). pp. 745-764. ISSN 1530-7980 (print); 0892-7057 (online). (Published)

Singh, Rupinder and Singh, Gurchetan and Singh, Jaskaran and Kumar, Ranvijay and M. M., Rahman and Ramakrishna, Seeram (2019) Thermomechanical investigations of PEKK-HAp-CS composites. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (11). pp. 1196-1203. ISSN 0954-4119. (Published)

Singh, Salvinder and Abdullah, Shahrum and Nik Abdullah, Nik Mohamed (2016) Discretized Markov Chain in Damage Assessment Using Rainflow Cycle with Effects of Mean Stress On An Automobile Crankshaft. Journal of Mechanical Science and Technology, 30 (8). pp. 3539-3551. (Published)

Singh, Yashvir and Sharma, Abhishek and Singh, Nishant Kumar and M. M., Noor (2020) Effect of SiC nanoparticles concentration on novel feedstock Moringa Oleifera chemically treated with neopentylglycol and their tribological behavior. Fuel, 280 (118630). pp. 1-12. ISSN 0016-2361. (Published)

Siregar, J. P. (2013) Characterization of biodegradable composites based on pineapple leaf fibre and tapioca bioplastic resin. (Unpublished)

Siregar, J. P. (2017) Compatibilizing effect of maleic anhydride on the mechanical properties of Mengkuang leaves fibre reinforced polythylene composites. , [Research Report: Research Report] (Unpublished)

Siregar, J. P. (2020) Fatigue behaviour of sugar palm fibre reinforced polylactic acid composites for automotive application. , [Research Report: Research Report] (Unpublished)

Siregar, J. P. and Cionita, Tezara and Bachtiar, Dandi and M. R. M., Rejab (2015) Tensile Properties of Pineapple Leaf Fibre Reinforced Unsaturated Polyester Composites. Applied Mechanics and Materials, 695. pp. 159-162. ISSN 1662-7482. (Published)

Siregar, J. P. and Cionita, Tezara and Nor Mariah, Adam and Juliana, Jalaludin and Mariani, Mansor (2014) Measurement of Indoor Air Quality Parameters in Daycare Centres in Kuala Lumpur Malaysia. Applied Mechanics and Materials, 564. pp. 245-249. ISSN 1662-7482. (Published)

Siregar, J. P. and Jamiluddin, Jaafar and Teuku, Rihayat and Suryani and Salmyah and Helmi and Sariadi and Fitria and Satriananda and Alfian, Putra and Zahra, Fona and Juanda and Raudah and Mawaddah and Nurhanifa and Shafira, Riskina and Wildan, Syahputra (2019) Wound dressing based on banana peels waste and chitosan by strengthening lignin as wound healing medicine. In: 1st South Aceh International Conference on Engineering and Technology, SAICOET 2018 , 8-9 Dec 2018 , Politeknik Aceh Selatan Tapaktuan, Aceh Selatan. pp. 1-10., 506 (1). ISSN 17578981

Siregar, J. P. and Jamiluddin, Jaafar and Teuku, Rihayat and Suryani and Satriananda and M., Yunus and Sariadi and Fitria and Shafira, Riskina and Zuhra, Amalia and Wildan, Syahputra and Nurhanifa and Safari and Nurul fitriah and Mardani (2019) Synthesis and characterization of North Aceh CEC bentonite determination with methylene blue method and increased D-Spacing after addition of surfactants CTAB-SDS. In: 1st South Aceh International Conference on Engineering and Technology, SAICOET 2018 , 8-9 Dec 2018 , Politeknik Aceh Selatan Tapaktuan, Aceh Selatan. pp. 1-7., 506 (1). ISSN 17578981

Siregar, J. P. and M. R. M., Rejab and Jamiluddin, Jaafar and Zalinawati, Muhamad and Cionita, Tezara and Mawarnie, Ismail and M.H.M., Hamdan (2020) Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan. pp. 1729-1734., 46. ISSN 2214-7853

Siregar, J. P. and Z. M., Hafizi and M. R. M., Rejab and Jamiluddin, Jaafar and Mohammad Hazim, Mohamad Hamdan and Bachtiar, Dandi and Tezara, C. and S. M., Sapuan (2019) Vibration analysis of hybrid-reinforced unsaturated polyester composites. In: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication and Applications. Elsevier, Amsterdam, Netherlands, pp. 489-514. ISBN 978-0-12-816129-6

Siregar, Januar Parlaungan and Al Ichlas, Imran and Rozanna, Dewi and Janviter, Manalu and Johni Jonatan, Numberi and Apolo, Safanpo (2023) The incorporation of crumb rubber in construction reinforcement: A review. Journal Of Innovation And Technology, 2023 (35). pp. 1-10. ISSN 2805-5179. (Published)

Siregar, Januar Parlaungan and Jaafar, Jamiluddin and Mat Rejab, Mohd. Ruzaimi and Tezara, C. and Choo, Chee Jie and Bachtiar, Dandi and Asmara, Y. P. (2019) The effect of maleic anhydride polyethylene on mechanical properties of pineapple leaf fibre reinforced polylactic acid composites. International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (1). pp. 101-112. ISSN 2288-6206. (Published)

Siregar, Januar Parlaungan and M. R. M., Rejab and Jamiluddin, Jaafar and Mohd Hazim, Mohd Hamdan and Bachtiar, Dandi and Tezara, C. (2019) Effect of maleated anhydride on mechanical properties of rice husk filler reinforced PLA matrix polymer composite. International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (1). pp. 113-124. ISSN 2288-6206. (Published)

Sirwan, Ranj and Alghoul, M.A. and Sopian, K. and Yusoff, Ali and Jasim, Abdulateef (2013) Evaluation Of Adding Flash Tank To Solar Combined Ejector–Absorption Refrigeration System. Solar Energy, 91. pp. 283-296. ISSN 0038-092X. (Published)

Siti Aina Mardhia, Dol Haji (2013) Design and fabricate of portable cnc milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Aishah, Rusdan and Tarlochan, Faris and Mohamad Rusydi, Mohamad Yasin (2013) Modeling and Optimization of Tapered Rectangular Thin-walled Columns Subjected to Oblique Loading for Impact Energy Absorption. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Siti Aishah, Safi (2019) Theoretical analysis on the wind power and pumped hydropower storage integrated flood mitigation system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Aisyah, Jilani and Akhtar Razul, Razali (2018) Variable speed pump performance characteristics for domestic application. MATEC Web of Conferences 225, 02005 (2018), 225 (2005). ISSN eISSN: 2261-236X. (Published)

Siti Anis Dalila, Muhammad Zahir and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Mohd Aminudin, Jamlos and Rizalman, Mamat and Muncan, Jelena S. and Tsenkova, Roumiana N. (2024) Review – Plant nutritional status analysis employing the visible and near-infrared spectroscopy spectral sensor. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 304 (123273). pp. 1-14. ISSN 1386-1425. (Published)

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Mohd Mustafa, Al Bakri Abdullah and Aiman, Mohd Halil and Amira Qistina Syamimi, Zaifuddin and Mahadzir, Ishak and Sandu, Andrei Victor and Baltatu, Mădălina Simona and Vizureanu, Petrica (2023) Effectiveness of dimple microtextured copper substrate on performance of Sn-0.7Cu solder alloy. Materials, 16 (96). pp. 1-14. ISSN 1996-1944. (Published)

Siti Fatimah, Ismail (2008) Design and analysis light weight lift system for disable people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Firdaus, Md Salleh (2013) Ductile failure analysis of API steel pipe using strain based failure criteria. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Siti Haifullia, Ayob (2010) Fuel-saving device rod electrode based on gasoline for fuel car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Hanani, Mat Yasin and Muhammad Khairul Anuar, Mohamed and Zulkhibri, Ismail and Mohd Zuki, Salleh (2021) Numerical solution on mixed convection heat transfer of ferrofluid over a horizontal circular cylinder. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Siti Hanis, Sidek (2009) Wind data logger. Faculty of Electrical & Electronic, Universiti Malaysia Pahang.

Siti Haryani, Tomadi and J. A., Ghani and C. H., Che Haron and M. S., Kasim and A. R., Daud (2014) Optimization of Cutting Parameters of Multiple Performance Characteristics in End Milling of AlSi/AIN MMC - Taguchi Method and Grey Relational Analysis. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 33-40. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Siti Haryani, Tomadi and Mas Ayu, Hassan and Rosdi, Daud (2009) Analysis of the Influence of EDM Parameters on Surface Quality, Material Removal Rate and Electrode Wear of Tungsten Carbide. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. .

Siti Haryani, Tomadi and J. A., Ghani and C. H., Che Haron and Mas Ayu, Hassan and Rosdi, Daud (2017) Effect of Cutting Parameters on Surface Roughness in End Milling of AlSi/AlN Metal Matrix Composite. Procedia Engineering, 184. pp. 58-69. ISSN 1877-7058. (Published)

Siti Haryani, Tomadi and Nor Farah Huda, Abd Halim and Mas Ayu, Hassan and Rosdi, Daud and Muhammad Ariff, Zakaria (2023) Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL. In: Lecture Notes in Mechanical Engineering; 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022 , 9-10 August 2022 , Kuala Lumpur. pp. 637-643. (294689). ISSN 2195-4356 ISBN 978-981199508-8

Siti Munirah, Muhammad Ali and El-Bouri, Wahbi K. and Mohd Jamil, Mohamed Mokhtarudin (2022) Age-based sensitivity analysis on cardiac hemodynamics using lumped-parameter modelling. In: 7th IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2022 - Proceedings , 7-9 December 2022 , Virtual, Online. pp. 160-164. (187642). ISBN 978-166549469-4

Siti Nadhira, Mohammad Sunar (2013) Design and development of wireless controller in CNC machining. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Nor Amira, Rosli and Wen Liu, Wei and Norhaida, Ab. Razak (2022) Comparison of graphene oxide properties synthesized by electrochemical exfoliation and hummers’ method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 81..

Siti Nor Suziyana, Dollah (2013) Simulation of micro hydro power based on river configuration at river downstream. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Norashikin, Yusoff (2013) Lift structural plan and design for Kolej Kediaman Tiga Universiti Malaysia Pahang. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Norazila, Zahari (2010) Design and development of a durian peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Norazila, Zahari (2017) Investigation of dynamics properties of dissimilar materials produced by friction stir welding. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Norazila, Zahari and A. A. R, Zakaria and M. S. M., Sani and Izzuddin, Zaman (2016) A Review on Model Updating of Joint Structure for Dynamic Analysis Purpose. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00023). ISSN 2261-236X

Siti Norazila, Zahari and M. S. M., Sani (2017) Investigation on impact hammer testing with different types of hammer tip for welded thin plate. Advanced Science Letters, 23 (11). pp. 11325-11329. ISSN 1936-6612. (Published)

Siti Norazila, Zahari and M. S. M., Sani and M., Ishak (2017) Finite Element Modelling and Updating of Friction Stir Welding (FSW) Joint for Vibration Analysis. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01021). ISSN 2261-236X

Siti Norazila, Zahari and M. S. M., Sani and Nurulakmar, Abu Husain and Ishak, M. and Izzuddin, Zaman (2016) Dynamic Analysis of Friction Stir Welding Joints in Dissimilar Material Plate Structure. Jurnal Teknologi (Sciences and Engineering), 78 (6-9). pp. 57-65. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Siti Norsyahira, Mohd Zahari and Nor Atiqah, Zolpakar and Mimi Muzlina, Mukri (2022) The prospective of particle image velocimetry (PIV) measurement velocity profile in thermoacoustic system. In: Eurasia Proceedings of Science, Technology, Engineering and Mathematics; International Conference on Technology, Engineering and Science, IConTES 2022 , 16 - 19 November 2022 , Antalya, Turkey. pp. 70-78., 21. ISSN 2602-3199 ISBN 978-605728324-5

Siti Norsyahira, Mohd Zahari and Nor Atiqah, Zolpakar and Nurrizatul Atikha, Rahmat (2022) Flow pattern analysis for oscillatory flow inside resonator tube for thermoacoustic refrigerator using PIV measurement. In: Eurasia Proceedings of Science, Technology, Engineering and Mathematics; International Conference on Technology, Engineering and Science, IConTES 2022 , 16 - 19 November 2022 , Antalya, Turkey. pp. 18-26., 21. ISSN 2602-3199 ISBN 978-605728324-5

Siti Nur Alwani, Shafie and Nik Abdul Hadi, Md Nordin and Muhammad Roil, Bilad and Nurasyikin, Misdan and Norazlianie, Sazali and Zulfan Adi, Putra and Mohd Dzul Hakim, Wirzal and Alamin, Idris and Juhana, Jaafar and Zakaria, Man (2021) [EMIM][Tf2N]-Modified silica as filler in mixed matrix membrane for carbon dioxide separation. Membranes, 11 (371). pp. 1-14. ISSN 2077-0375. (Published)

Siti Nur Athirah, Ahmad Latfi and Nur Najmiyah, Jaafar (2022) An investigation of travel time pattern of T224 RapidKL bus using AVL data. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). pp. 66-72. ISSN 2636-9575. (Published)

Siti Nur Atikah, Abdullah and Abdul Adam, Abdullah and Ahmad Rasdan, Ismail and B. M., Deros (2015) A Descriptive Analysis Of Factors Contributing To Bus Drivers’ Performances While Driving: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2430-2437. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Siti Nur Azwin, Zulkapri (2019) Wrehab peranti bantu ahli fisioterapi. Utusan Malaysia .

Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Faizal, Mustapha and Nuruzzaman, D. M. and Muhammad Ihsan, Abdul Latiff and Noor Mazni, Ismail (2017) Phase Contamination Characterization of Stepwise-built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres. In: 5th International Conference on Engineering and Innovative Materials, ICEIM 2016 , 10 - 12 September 2016 , Kuala Lumpur, Malaysia. pp. 90-96., 889. ISSN 0255-5476

Siti Nurashiken, Md Sabudin and Norazaliza, Mohd Jamil (2019) Parameter estimation in mathematical modelling for photovoltaic panel. In: IOP Conference Series: Materials Science and Engineering, International Conference on Science and Innovated Engineering 2018, i-COSINE 2018 , 21-22 October 2018 , Mata Ie Resort, Sabang, Aceh, Indonesia. pp. 1-12., 536 (012001). ISSN 1757-8981 (Print), 1757-899X (Online)

Siti Nursuhailah, Md Suhaidin and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2022) The development of quick response manufacturing in supply chains activities based on product planning control. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 127-132.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Siti Nursyuhada, Mahsahirun and Nik Rumzi, Nik Idris and Zulkifli, Md. Yusof and Sutikno, Tole (2020) Fundamental elements of constant volt/hertz induction motor drives based on dSPACE DS1104 controller. International Journal of Power Electronics and Drive System (IJPEDS), 11 (4). pp. 1670-1685. ISSN 2088-8694 (print); 2088-8694 (online). (Published)

Siti Qhadijah, Abdul Rashid (2007) Modeling and simulation of an asymmetric plane diffuser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Rabiatull Aisha, Idris and Ali, Ourdjini and Saliza Azlina, Osman (2011) Effect of Multiple Reflow on Intermetallic Compound Formation using Various Surface Finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410 (print); 1741-8429 (online). (Published)

Siti Rabiatull Aisha, Idris (2023) 14 UMPSA students participate in Introduction to Underwater Welding Programme. UMPSA News .

Siti Rabiatull Aisha, Idris (2022) Commercial Diving A Career Path Worths a Consideration. FTKMA Bulletin, 3 . p. 28. ISSN 2773-594X

Siti Rabiatull Aisha, Idris and M., Ishak and Aiman, Mohd Halil (2017) BMM1533 workbook: strength of materials 1. Penerbit UMP, Kuantan, Pahang. ISBN 976-967-2054-56-6

Siti Rabiatull Aisha, Idris and M. N., Mazelan (2023) Effect of microwave hybrid heating on mechanical properties and microstructure of Sn3.0Ag0.5Cu/Cu solder joints. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Siti Rabiatull Aisha, Idris and Nabila, T. J. and M., Ishak (2018) Effect of different parameters of fibre laser soldering on interfacial reaction and wetting angle of two types of lead-free SAC305 solder fabrication on cu pad. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. p. 1., 469 (012117).

Siti Rabiatull Aisha, Idris and Nabila, Tamar Jaya and Muhammad Asyraf, Abdullah (2022) The Effect of Laser Soldering onto Intermetallic Compound Formation, Growth. In: Recent Progress in Lead-Free Solder Technology. Springer, Switzerland AG, pp. 265-282. ISBN 978-3-030-93441-5

Siti Rabiatull Aisha, Idris and Noor, Farihan and Hardinnawirda, Kahar (2016) Effect of Flux onto Intermetallic Compound Formation and Growth. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-3., 74 (00034). ISSN 2261-236X

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Saliza Azlina, Osman (2016) The Effectiveness of Bismuth Addition to Retard the Intermetallic Compound Formation. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (1). pp. 107-111. ISSN 1307-6892. (Published)

Siti Rabiatull Aisha, Idris and Siti, Zuleikha and Zetty Akhtar, Abd Malek (2016) Wettability Study of Lead Free Solder Paste and its Effect Towards Multiple Reflow. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00038). ISSN 2261-236X

Siti Radiah, Arrippin (2013) Fluid structure interface (FSI) of force excitation on pipeline t-joint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Rohaida, Mohamed (2017) Mechanical and biocompatibility analyses of metabiomaterials cobalt chrome molybdenum manufactured by selective laser melting for load bearing implant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Saiful Anwar, Che Ghani).

Siti Rohaida, Mohamed and S. A., Che Ghani and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2016) Evaluations of Co-Cr-Mo meta-biomaterial manufactured by selective laser melting for orthopaedic application. In: Symposium & Exhibition on Additive Manufacturing , 26 July 2016 , The Light Hotel, Seberang Jaya, Penang. pp. 1-5.. (Unpublished)

Siti Rohaida, Mohamed and Saiful Anwar, Che Ghani (2021) Investigation of design space in manufacturing meta-biomaterials by additive manufacturing. IOP Conference Series: Materials Science and Engineering, 1078. 012-024. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Siti Sabariah, M. and Syafiqah Nabilah, A. S. and R. A., Bakar and Junaidi, Z. Z. and Mustafar, M. T. (2019) Analysis and simulation of combustion and emission on small engine. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Siti Sarah, Abdul Manan and Kartina, Johan and Faiz, Mohd Turan (2023) Sustainability performance level of small medium enterprises in Pahang in the context of non-renewable energy consumption using correlation analysis. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 57-61. ISSN 2637-0883. (Published)

Siti Sarah, Abdul Manan and Law, Ping Chien and Muhammed Nafis, Osman Zahid (2023) A simulation of insertion and retention forces in cantilever hook snap-fit joint. In: IET Conference Proceedings. IET Conference Proceedings; 2022 Engineering Technology International Conference, ETIC 2022 , 07 - 08 September 2022 , Pahang, Virtual. 57 -62., 2022 (22). ISSN 2732-4494 ISBN 978-1-83953-782-0

Siti Sarah, Abdul Manan and Muhammed Nafis, Osman Zahid (2023) A parametric study of insertion and retention forces in cantilever hook. Journal of Mechanical Engineering and Sciences (JMES), 17 (1). 9360 -9369. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Zubaidah, Aziz and Mohd Faizal, Jamlos (2016) Compact Super Wideband Patch Antenna Design Using Diversities of Reactive Loaded Technique. Microwave and Optical Technology Letters, 58 (12). pp. 2811-2814. (Published)

Siti Zun Nurain, Mohd Ali and Intan Suhana, Mohd Razelan (2021) Exploration of risky riding behaviour among young motorcyclist. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22-23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-14., 1092 (012074). ISSN 17578981 (Printed); 1757899X (Online)

Siti Zun Nurain, Mohd Ali and Intan Suhana, Mohd Razelan (2022) Uncovering the risky riding behaviors among young motorcyclist in urban areas. In: AWAM International Conference in Civil Engineering (AICCE) 2022 , 15-17 February 2022 , Penang, Malaysia. pp. 1-21.. (Submitted)

Siti Zuraida, Ismail (2013) Design and development of andon system for machining machine at FKP lab. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Sivakumar, A. and Sathiyamoorthi, R. and Jayaseelan, V. and Gandhi, R. Ashok and Sudhakar, K. (2019) Performance of waste insulating mineral oil-based biodiesel in a direct-injection CI engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9349-9361. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sivaraos, . and A. Z., Khalim and M. S., Salleh and D., Sivakumar and K., Kadirgama (2018) Mamdani-Fuzzy Modeling Approach for Quality Prediction of Non-Linear Laser Lathing Process. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-9., 318 (012067). ISSN 1757-899X

Sivaraos, . and Khalim, A. Z. and Salleh, M. S. and D., Sivakumar and K., Kadirgama (2018) Sugeno-Fuzzy Expert System Modeling for Quality Prediction of Non-Contact Machining Process. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-8., 318 (012066). ISSN 1757-8981 (Print), 1757-899X (Online)

Sivasankaran, Praveena Nair (2008) Experimental analysis on drilling process of composite laminates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Smallbone, Andrew and Mohd Razali, Hanipah and Jia, Boru and Scott, Tim and Heslop, Jonathan and Towell, Ben and Lawrence, Christopher and Roy, Sumit and Shivaprasad, K. V. and Roskilly, Antony Paul (2020) Realization of a novel free-piston engine generator for hybrid-electric vehicle applications. Energy & Fuels, 34 (10). pp. 12926-12939. ISSN 0887-0624. (Published)

Sofiah, A. G. N. and Mahendran, Samykano and K., Kadirgama and Mohan, R. V. and Nurul Akmal, Che Lah (2018) Metallic nanowires: Mechanical properties - Theory and experiment. Applied Materials Today, 11. pp. 320-337. ISSN 23529407. (Published)

Sofiah, A. G. N. and Samykano, M. and Shahabuddin, S. and Kadirgama, K. and Pandey, A. K. and Noor, M. M. (2021) A brief review on thermal behaviour of PANI as additive in heat transfer fluid. Emerging Advances in Integrated Technology, 2 (1). 47 -52. ISSN 2773-5540. (Published)

Sofiah, A. G. N. and Samykano, Mahendran and Pandey, A. K. and Kadirgama, K. (2021) Immense impact from small particles: Review on stability and thermophysical properties of nanofluids. Sustainable Energy Technologies and Assessments, 48 (101635). pp. 1-32. ISSN 2213-1388. (Published)

Soh, Yan Xin (2013) Analysis of structure borne wave signatures in pipeline leakage detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Solechan, Solechan and Suprihanto, Agus and Widyanto, Susilo Adi and Triyono, Joko and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) biocomposites prepared via cold isostatic pressing. Polymers, 15 (559). pp. 1-17. ISSN 2073-4360. (Published)

Solechan, Solechan and Suprihanto, Agus and Widyanto, Susilo Adi and Triyono, Joko and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara (2022) Investigating the effect of pcl concentrations on the characterization of pla polymeric blends for biomaterial applications. Materials, 15 (7396). pp. 1-13. ISSN 1996-1944. (Published)

Solomin, E. and Selvanathan, S.P. and Kumarasamy, S. and Kovalyov, A. and Maddappa Srinivasa, R. (2021) The comparison of solar-powered hydrogen closed-cycle system capacities for selected locations. Energies, 14 (9). pp. 1-18. ISSN 1996-1073. (Published)

Solomin, Evgeny and Sirotkin, Evgeny and Cuce, Erdem and Selvanathan, Shanmuga Priya and Sudhakar, K. (2021) Hybrid floating solar plant designs: A review. Energies, 14 (10). pp. 1-25. ISSN 1996-1073. (Published)

Soni, R. A. and Sudhakar, K. and Rana, R. S. (2021) Biochemical and thermal analysis of spirulina biomass through FTIR, TGA, CHN. Energy Engineering: Journal of the Association of Energy Engineering, 118 (4). pp. 1045-1056. ISSN 0199-8595. (Published)

Soni, Ruma Arora and Sudhakar, K. and Rana, R. S. (2019) Comparative study on the growth performance of Spirulina platensis on modifying culture media. Energy Reports, 5. pp. 327-336. ISSN 2352-4847. (Published)

Soni, Ruma Arora and Sudhakar, K. and Rana, R. S. (2020) Simulation and analysis of open raceway pond system at Manit, Bhopal. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (012084). ISSN 1757-8981 (Print), 1757-899X (Online)

Soon, Chi Wei (2010) Maze solving balbot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Sreenath, S. and Azlin, Mohd Azmi and Nofri Yenita, Dahlan and Sudhakar, Kumarasamy (2022) A decade of solar PV deployment in ASEAN : Policy landscape and recommendations. Energy Reports, 8. pp. 460-469. ISSN 2352-4847. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Effect of PV material, texturing, orientation and tracking on glare impact: A simulation study from an Indian airport. Cleaner Engineering and Technology, 4 (100236). pp. 1-11. ISSN 2666-7908. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Suitability analysis of solar tracking PV system in the airport based on glare assessment. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9061-9070. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2020) Technical assessment of captive solar power plant: A case study of Senai Airport, Malaysia. Renewable Energy, 152. pp. 849-866. ISSN 0960-1481. (Published)

Sri Nur Areena, Mohd Zaini and Filzah Lina, Mohd Safeiee and Ahmad Shahrizan, Abdul Ghani and Nur Najmiyah, Jaafar and Mohd Yazid, Abu (2023) Integration of Mahalanobis-Taguchi System and Time-Driven Activity-Based Costing in a Production Environment. Applied Sciences, 13 (4). pp. 1-15. ISSN 2076-3417. (Published)

Srinivas, I. and Sharma, K. V. (2011) A comparison study on fuel properties of pretreated Pongamia and Jatropha methyl esters for C.I. engine usage. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 34 (4). pp. 316-323. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Srinivasarao, P. and Peddakapu, K. and M. R., Mohamed and Deepika, K.K. and Sudhakar, K. (2020) Simulation and experimental design of adaptive-based maximum power point tracking methods for photovoltaic systems. Computers and Electrical Engineering, 89 (106910). pp. 1-21. ISSN 0045-7906. (Published)

Subramaniam, Shathiswara Rao and Mahendran, Samykano and Selvamani, Sathish Kumar and W. K., Ngui and K., Kadirgama and Sudhakar, K. and M. S., Idris (2019) Preliminary Investigations of Polylactic Acid (PLA) Properties. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020038). ISBN 978-0-7354-1787-8

Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) 3D Printing: Overview of PLA Progress. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25 - 26 Julai 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-10.. (Unpublished)

Sudhakar, K. (2022) UMP Excels in The Research Area of PV Module Cooling. FTKMA Bulletin, 3 . p. 28. ISSN 2773-594X

Sudhakar, K. and Jenkins, M. S. and Mangal, S. and Priya, S. Shanmuga (2019) Modelling of a solar desiccant cooling system using a TRNSYS-MATLAB co-simulator : a review. Journal of Building Engineering, 24. pp. 1-8. ISSN 2352-7102. (Published)

Sudhakar, K. and Mahendran, Samykano and Ria, - (2018) Performance of utility scale PV Plant in Malaysia and India: a comparative study. In: 4th International Conference on Electrical Energy Systems (ICEES) 2018 , 7-9 Feb 2018 , Chennai, India. pp. 106-110..

Sudhakar, K. and R., Mamat and Mahendran, Samykano and Azmi, W. H. and W. F. W., Ishak and Yusaf, Talal (2018) An overview of marine macroalgae as bioresource. Renewable and Sustainable Energy Reviews, 91. pp. 165-179. ISSN 1364-0321. (Published)

Sudhakar, K. and Winderl, Maximilian and Priya, S. Shanmuga (2019) Net-zero building designs in hot and humid climates: A state-of-art. Case Studies in Thermal Engineering, 13. pp. 1-16. ISSN 2214-157X. (Published)

Sudrajad, Agung and Ismail, Ali and Hazmie, Hamdan and Herzwan, Hamzah (2012) Exhaust emissions of DI diesel engine using unconventional fuels. In: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 425-430., 1440. ISSN 0094-243X

Sudrajad, Agung and Ismail, Ali and Samo, Khalid and Faturachman, Danny (2012) An experimental study of gaseous exhaust emissions of diesel engine using blend of natural fatty acid methyl ester. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (1). ISSN 1757-899X

Sue-Rynley, Anak Emley (2008) Cryogenic-assisted high speed machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suga Ganeshan, Kalaichalban (2013) CFD of a screw blade for standalone micro hydro generator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suganthi, Jayaraman (2012) Prediction of grinding machinability when grind aluminium alloy using water based zinc oxide nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sugumaran, Sathish and Mohd Faizal, Jamlos and Mohd Noor, Ahmad and Bellan, Chandar Shekar and Sivaraj, Manoj (2016) Thickness and Annealing Effects on Thermally Evaporated InZnO Thin Films for Gas Sensors and Blue, Green and Yellow Emissive Optical Devices. Optical Materials, 58. pp. 342-352. ISSN 0925-3467. (Published)

Suhail Hadri, Shamsudin (2013) Modelling and analyzing of an active magnetic bearing. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2022) Simulated Kalman Filter with modified measurement, substitution mutation and hamming distance calculation for solving traveling salesman problem. In: Enabling Industry 4.0 through Advances in Mechatronics: selected articles from iM3F 2021, Malaysia , 20 September 2021 , Universiti Malaysia Pahang (UMP). pp. 309-320.. ISBN 978-981-19-2095-0

Sukumaran, Sreenath and Sudhakar, K. (2017) Fully Solar Powered Airport: A Case Study of Cochin International Airport. Journal of Air Transport Management, 62. pp. 176-188. ISSN 0969-6997. (Published)

Sukumaran, Sreenath and Sudhakar, K. (2017) Fully Solar Powered Raja Bhoj International Airport: A Feasibility Study. Resource-Efficient Technologies, 3. pp. 306-316. ISSN 2405-6537. (Published)

Sukumaran, Sreenath and Sudhakar, K. (2018) Performance analysis of solar powered airport based on energy and exergy analysis. Energy Procedia, 149. pp. 1000-1009. ISSN 1876-6102. (Published)

Sukumaran, Sreenath and Sudhakar, Kumarasamy and Ahmad Fitri, Yusop (2021) A Novel tool for sustainability assessment of energy projects. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Sulaiman, Alias (2008) Design analysis of a piston for compressed natural gas (CNG) engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sulaiman H., A. J. and Aiman, M. H. and Ishak, M. and Quazi, M. M. and Zaharinie, T. and Ariga, T. (2021) Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8601-8607. ISSN 2231-8380 (online). (Published)

Suleiman, Akilu and Baheta, Aklilu Tesfamichael and K., Kadirgama and Padmanabhan, Eswaran and Sharma, K. V. (2019) Viscosity, electrical and thermal conductivities of ethylene and propylene glycol-based β-SiC nanofluids. Journal of Molecular Liquids, 285. pp. 780-792. ISSN 0167-7322. (Published)

Suleiman, Akilu and K. V., Sharma and Baheta, Aklilu Tesfamichael and R., Mamat (2016) A Review of Thermophysical Properties of Water Based Composite Nanofluids. Renewable and Sustainable Energy Reviews, 66. pp. 654-678. ISSN 1364-0321. (Published)

Sunarti, Abd Rahman and Wan Zulaisa Amira, Wan Jusoh (2015) Optimization of the Preparation of Hydrophobic Isotactic Polypropylene Flat Sheet Membrane by Response Surface Methodology Design. Journal of Scientific Research & Reports, 7 (5). pp. 322-337. ISSN 2320-0227. (Published)

Sundarajoo, Suresh and Ahmad Shahrizan, Abdul Ghani (2018) Improvement of Auto-Tracking Mobile Robot based on HSI Color Model. Indonesian Journal of Electrical Engineering and Computer Science, 12 (3). pp. 1349-1357. ISSN 2502-4752. (Published)

Sunny, Kalakanda Alfred and Kumar, Pradeep and Kumar, Nallapaneni Manoj and Veena, A. and G. J., Adheena (2018) Two blade vertical axis wind turbine: investigations on the torque generation at different rotational velocities. In: 2nd International Conference on Advancements in Aeromechanical Materials for Manufacturin (ICAAMM 2018) , 13-14 July 2018 , Telangana, India. pp. 1-6., 455 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Sup, Billy (2010) Effect of Absorber plate material on flat plate collector efficiency. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suraidah, S. and Muhamad Ridzuwan, . and Gebremariam, M. A. and Azmir, Azhari and Kassa, Freselam Mulubrhan (2020) End milling finite element method for cutting force prediction and material removal analysis. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8., 788 (012020). ISSN 1757-8981 (Print), 1757-899X (Online)

Suraya, Sulaiman and Izman, Sudin and Al-Naib, Uday M. Basheer and Muhammad Firdaus, Omar (2022) Review of the Nanostructuring and Doping Strategies for High-Performance ZnO Thermoelectric Materials. Crystals, 12 (8). pp. 1-16. ISSN 2073-4352. (Published)

Suraya, Sulaiman and Nur Syazwa, Zamri and Radhiyah, Abd Aziz and Mohamad Farid, Mohamad Sharif and Natasha, Ahmad Nawawi and Nur Ayuni, Jamal (2022) Effects of Solvents on ZnO Nanoparticles Synthesis via Sol–gel Method. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 1-9.. ISSN 978-981-19-1457-7

Suryanarayana, K. V. and Rao, G. Srinivasa and Prasad, D. M. R. and Sharma, K. V. and Sarma, P. K. (2011) Experimental Analysis of Heat and Mass Transfer in a Packed Bed. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 124-132. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Suryani, . and Rihayat, Teuku and Nurhanifa, . and Siregar, J. P. and Jaafar, J. and Cionita, T. and Fitria, . (2020) Green composites of natural fiber bamboo/pineapple leaf/coconut husk as hybrid materials. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-10., 788 (012038). ISSN 1757-8981

Sutjipto, A. G. E. and Asmara, Y. P. and Mohamad Ashry, Jusoh (2017) Behavior of MgO Based Ceramics under Electron Irradiation. In: Engineering Physics International Conference (EPIC 2016) , 7-10 September 2016 , Bandung, Indonesia. pp. 88-92., 170. ISSN 1877-7058

Suwandi, Agri and Rachmawanto, Muhammad Pillar and Libyawati, Wina and Siregar, Januar Parlaungan (2023) The development of exhaust fan housing with ceiling mounting for high rise buildings by using DFMA. Journal of Applied Engineering and Technological Science, 4 (2). pp. 895-907. ISSN 2715-6087. (Published)

Suziyana, Mat Dahan and Mohd Yusof, Taib and Nurhaizan, Mohd Zainudin and Fadzida, Ismail (2016) Surveying Users' Perception of Academic Library Services Quality: A Case Study in Universiti Malaysia Pahang (UMP) Library. The Journal of Academic Librarianship, 42 (1). pp. 38-43. ISSN 0099-1333. (Published)

Suziyana, Mat Dahan and S. N., Nina and T. M., Yusof and Ahmad Basirul Subha, Alias (2013) Analysis of Heat Gain in Computer Laboratory and Excellent Centre by using CLTD/CLF/SCL Method. Procedia Engineering, 53. pp. 655-664. ISSN 1877-7058. (Published)

Suziyana, Mat Dahan and Sha'ri, Mohd Yusof and Mohd Yusof, Taib (2017) Performance measure of eco-process innovation: Insights from a literature review. In: UTP-UMP Symposium on Energy Systems, SES 2017 , 26-27 September , Perak, Malaysia. pp. 1-13., 131. ISSN 2261236X

Syafiq, Zulkifli and O., Fahmi and Awad, Omar I. and Abdul Adam, Abdullah (2016) The Study of Stability and Combustion Characteristics O Water In Diesel Emulsion Fuel. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Syafiq, Zulkifli and O., Fahmi and N., Syuhaida and Abdul Adam, Abdullah (2016) Diesel Engine Performance and Exhaust Emission Analysis Using Diesel-Organic Germanium Fuel Blend. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished)

Syafiq Ahmad, Abdul Aleem and Mohd Fadhlan, Mohd Yusof and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak (2023) Mel-frequency cepstral and spectral flux analysis of the acoustic signal for real-time status monitoring of laser cleaning. Materials Research Express, 10 (106506). pp. 1-23. ISSN 2053-1591. (Published)

Syafiq Fauzi, Kamarulzaman (2015) Design of multiple-functions controller based on machine learning. PhD thesis, University of Tsukuba (Contributors, Thesis advisor: Seiji, Yasunobu).

Syafiq Fauzi, Kamarulzaman (2017) Multi-task learning control system by compound function with application in goal and obstacle consideration. In: IEEE 4th International Symposium on Robotics and Intelligent Sensors (IRIS 2016) , 17-20 December 2016 , Tokyo, Japan. pp. 27-33.. ISBN 978-1-5090-6084-9

Syafiq Fauzi, Kamarulzaman and Alsibai, Mohammed Hayyan (2018) Time-Change-Fuzzy-based Intelligent Vehicle Control System for Safe Emergency Lane Transition During Driver Lethargic State. Advanced Science Letters, 24 (10). pp. 7554-7558. ISSN 1936-6612. (Published)

Syafiq Qhushairy, Syamsul Amri and Ahmad Shahrizan, Abdul Ghani and Mohd Aiman Syahmi, Kamarul Baharin and Mohd Yazid, Abu and Fusaomi, Nagata (2023) Improving images in turbid water through enhanced color correction and particle swarm-intelligence fusion (CCPF). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 18-35. ISSN 2637-0883. (Published)

Syafiq Qhushairy, Syamsul Amri and Ahmad Shahrizan, Abdul Ghani and Mohd Aiman Syahmi, Kamarul baharin (2023) Implementation of underwater image enhancement for corrosion pipeline inspection (UIECPI). In: 2023 19th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2023 - Conference Proceedings , 3-4 March 2023 , Kedah. pp. 195-200.. ISBN 978-166547692-8

Syahidah Nafisa, Abdul Malik (2013) Development of graphical user interface (GUI) for bearing fault detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahril Azeem Ong, Haji Maliki Ong (2012) Bearing fault detection using discrete wavelet transform. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahrul Ramadhan, A. K. A. and Jasri, Mohamad and Bazli, M. A. (2020) Determining dominant process parameters in polyester yarn winding. Journal of Industrial and Modern Manufacturing, 1 (2). pp. 12-17. ISSN 2716-5965. (Published)

Syaiful Azmirul, Mohd Rozlan and Izzuddin, Zaman and Bukhari, Manshoor and Amir, Khalid and Shiau, Wei Chan and M. S. M., Sani (2017) Theoretical Modelling of a Beam with Attached Spring-Mass-Damper System. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01030). ISSN 2261-236X

Syaiful Azmirul, Mohd Rozlan and Izzuddin, Zaman and Chan, Shiau Wei and Bukhari, Manshoor and M. S. M., Sani and Amir, Khalid (2017) Study of a simply-supported beam with attached multiple vibration absorbers by using finite element analysis. Advanced Science Letters, 23 (5). pp. 3951-3954. ISSN 1936-6612. (Published)

Syamimi Soliha, Mohd (2013) Construction of the sunpath diagrams for Pekan area for simulating the solar radiation effects to a building. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syamsutajri, Syamsol Bahri and Zawati, Harun and Wan Norhayati, Wan Salleh and Muhammad Nur Hakim, Abd Kadir and Norazlianie, Sazali and Rosniza, Hussin and Hatijah, Basri (2019) The influence of Fe doped TiO2 as inorganic additive on the properties of polysulfone ultrafitration membrane. Malaysian Journal of Fundamental and Applied Sciences, 15 (5). pp. 725-730. ISSN 2289-5981. (Published)

Syarifah, Syahirah and Kahar, Osman and Kamarul, Redzuan and Zamani, Ngali and Nasrul Hadi, Johari (2011) Unsteady pressure fluctuation for internal flow in a cylinder using LES model. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 782-788., 1440 (782). ISSN 0094-243X

Syarifah, Yunus and Amirul, Abd Rashid and Nik Rosli, Abdullah and R., Mamat and Syazuan, Abdul Latip (2013) Emissions of Transesterification Jatropha-palm Blended Biodiesel. Procedia Engineering, 68. pp. 265-270. ISSN 1877-7058. (Published)

Syarifah, Yunus and N. R., Abdullah and R., Mamat and A. A., Rashid (2013) An Overview of Palm, Jatropha & Algae as a Potential Biodiesel Feedstock in Malaysia. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Syazwan, Kamaruzzaman (2009) Stair climbing robot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Syazwan Izharuddin, Mohamad Sabri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Sharuzi, Wan Harun and K., Kadirgama and D., Ramasamy (2023) Investigation on water quality for farmed aquatic species by IoT monitoring system. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 317-327. ISSN 2462-1943. (Published)

Syazwan Nizam, Moni and Edriyana, Abd Aziz and Anwar P. P., Abdul Majeed and Marlinda, Malek (2021) The prediction of blue water footprint at Semambu water treatment plant by means of Artificial Neural Networks (ANN) and Support Vector Machine (SVM) models Machine (SVM) models. Physics and Chemistry of the Earth, 123 (103052). pp. 1-7. ISSN 1474-7065. (Published)

Syazwana, Mohd Zabidi (2013) Finite element method of electromagnetic energy harvester : simple beam-mass system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Syazwana, Sapee (2023) The effect of oxygenated turpentine and alpha pinene oil additives in diesel fuel on the performance, combustion, and emissions in diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

Syazwana, Sapee and Ahmad Fitri, Yusop and Mohammad Nazri, Mohd Jaafar and R., Mamat and Wan Asma, Ibrahim and Hazir, Farouk and Norwazan, Abdul Rahim and lyia Syafira, Ab Razak and Muhammad Syahiran, Abdul Malik and Zhang, B. (2018) Synthesis of non-edible biodiesel from crude jatropha oil and used cooking oil. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (06008). ISSN 2261-236X

Syed, Qutaba and Azmir, Azhari and Gebremariam, Mebrahitom Asmelash and Yadav, Aman and Lusi, Nuraini (2022) Development of fiber metal laminate composite with different glass fiber gsm. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-8.. ISSN 2214-7853 (In Press / Online First)

Syed Musa Kazim, Syed Zainal Abidin (2013) Development of solar powered mobile robot. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Syeda Najiha, Masood (2015) Performance investigation and multi-objective optimization of end milling of aluminium alloy 6061 T6 with coated and uncoated carbide tools under various cooling conditions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Syifak Izhar, Hisham and Jasni, Mohamad Zain and Nurul Wahidah, Arshad and Siau-Chuin, Liew and Nasrul Hadi, Johari and Gran, Badshah (2014) Authentication System for Medical Images Using Hilbert Numbering. In: International Conference on Computer, Communications, and Control Technology , 2-4 September 2014 , Langkawi, Kedah. pp. 198-202..

T

T., Rihayat and Suryani, . and S., Riskina and Siregar, J. P. and Jamiluddin, Jaafar and T., Cionita and Fitria, . (2020) Making Polyurethanes from castor oil with addition of bentonite and chitosan as coating paints on eco-friendly medical device applications. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

T. J., Nabila and Siti Rabiatull Aisha, Idris and M., Ishak (2017) Optimization On Laser Soldering Parameters Onto Lead-Free Solder Joint. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (1). ISSN 17578981

T. M., Yusof and S., Anuar and Hassan, Ibrahim (2015) Thermal Analysis of a Ground Passive Cooling (GPC) Using Experimental Method. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

T. T., Ayu and M. H., Hailu and Hagos, F. Y. and Atnaw, Samson M. (2015) Energy Audit and Waste Heat Recovery System Design for a Cement Rotary Kiln in Ethiopia: A Case Study. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2983-3002. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

T. T., Mon and M. M., Noor and R. A., Bakar and M. R. M., Rejab (2008) Finite Element Prediction of Heat-Affected Zone in Laser-micromachining of Silicon. In: Proceeding of International Conference on MEMS and Nanotechnology . .

T. Z. S., Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Farid, Z. (2013) Investigation of potential waste material insulating properties at different temperature for thermal storage application. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-4 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8., 50 (1). ISSN 1757-899X

Taha, Zahraa Khduair and Yaw, Chong Tak and Koh, Siaw Paw and Tiong, Sieh Kiong and Kadirgama, Kumaran and Benedict, Foo and Tan, Jian Ding and Balasubramaniam, Yogendra A.L. (2023) A survey of federated learning from data perspective in the healthcare domain : Challenges, methods, and future directions. IEEE Access, 11. pp. 45711-45735. ISSN 2169-3536. (Published)

Tahriri, Farzad and Siti Zawiah, Md Dawal and Zahari, Taha (2014) Multiobjective Fuzzy Mixed Assembly Line Sequencing Optimization Model. Journal of Applied Mathematics. pp. 1-19. ISSN 1110-757X (print); 1687-0042 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) Analysis of Laminar Forced Convection of Air for Crossflow Over Two Staggered Flat Tubes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul-De). pp. 755-767. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) Estimation of Heat Transfer and Pressure Drop in an In-Line Flat Tubes Bundle by Radial Basis Function Network (RBFN). In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-8..

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An Experimental Study of Heat Transfer and Friction Factor Characteristics of Finned Flat Tube Banks with In-Line Tubes Configurations. Applied Mechanics and Materials, 564. pp. 197-203. ISSN 1662-7482. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) A Numerical Study Laminar Forced Convection of Air for In-Line Bundle of Cylinders Crossflow. Asian Journal of Scientific Research, 6 (2). pp. 217-226. ISSN 1992-1454. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) A Numerical Study of Forced Convection Heat Transfer Over a Series of Flat Tubes Between Parallel Plates. Journal of Mechanical Engineering and Sciences (JMES), 3. pp. 271-280. ISSN 2231-8380 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2011) A Numerical Study of Forced Convection Heat Transfer for Staggered Tube Banks in Cross-Flow. In: 1st International Conference on Mechanical Engineering Research , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 216-227..

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An experimental study of air flow and heat transfer over in-line flat tube bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2015) An Overview on Thermal and Fluid Flow Characteristics in a Plain Plate Finned and Un-Finned Tube Banks Heat Exchanger. Renewable and Sustainable Energy Reviews, 43. pp. 363-380. ISSN 1364-0321. (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman (2014) Heat Transfer and Pressure Drop Prediction In An In-Line Flat Tube Bundle by Radial Basis Function Network. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2003-2015. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Effect of Tube Spacing, Fin Density and Reynolds Number on Overall Heat Transfer Rate for In-line Configuration. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3065-3075. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2014) An Experimental Study of Air Flow and Heat Transfer Over In-Line Flat Tube Bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Experimental Study on Heat Transfer and Friction Factor in Laminar Forced Convection over Flat Tube in Channel Flow. Procedia Engineering, 105. pp. 46-55. ISSN 1877-7058. (Published)

Tahseen , T.A. and M., Ishak and M. M., Rahman (2014) Performance predictions of laminar heat transfer and pressure drop in an in-line flat tube bundle using an adaptive neuro-fuzzy inference system (ANFIS) model. International Communications in Heat and Mass Transfer, 50. pp. 85-97. ISSN 0735-1933. (Published)

Tahseen Ahmad, Tahseen (2014) Optimal geometric arrangement of unfinned and finned flat tube heat exchangers under laminar forced convection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tai, K. Siang and Anusuiah, Vasu and Hagos, F. Y. and M. M., Noor and R., Mamat and K., Kadirgama and Azmi, W. H. and Samykano, Mahendran and Sharma, Ravi Kumar (2018) Effect of loading temperature on thermophysical properties of paraffin wax as PCM for thermal energy storage. In: Proceedings of International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019) , 8-9 March 2019 , Manipal University Jaipur. p. 55..

Talal, Yusaf and Louis, Fernandes and Abd Rahim, Abu Talib and Yazan S. M., Altarazi and Waleed, Alrefae and Kadirgama, Kumaran and Ramasamy, Devarajan and Jayasuriya, Aruna and Brown, Gordon and Rizalman, Mamat and Hayder, Al Dhahad and Benedict, F. and Mohamd, Laimon (2022) Sustainable aviation—hydrogen is the future. Sustainability (Switzerland), 14 (1). pp. 1-17. ISSN 2071-1050. (Published)

Talal, Yusaf and Mohamd, Laimon and Waleed, Alrefae and Kadirgama, Kumaran and Hayder A., Dhahad and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Belal, Yousif (2022) Hydrogen energy demand growth prediction and assessment (2021–2050) using a system thinking and system dynamics approach. Applied Sciences (Switzerland), 12 (2). pp. 1-16. ISSN 2076-3417. (Published)

Talib, S. F. A. and Azmi, W. H. and Irnie, Zakaria and W. A. N. W., Mohamed and A. M. I., Mamat and H., Ismail and W. R. W., Daud (2015) Thermophysical Properties of Silicon Dioxide (SiO2) in Ethylene Glycol/Water (EG/W) Mixture for Proton Exchange Membrane Fuel Cell Cooling Application. Energy Procedia, 79. pp. 366-371. ISSN 1876-6102 . (Published)

Talu, Stefan and Kulesza, Slawomir and Bramowicz, Miroslaw and Pathak, Sunil and Jain, N. K. (2019) Multiscale surface texture and fractal analysis of straight bevel gears finished by PECH and PECF process. Materials and Manufacturing Processes, 34 (16). pp. 1882-1887. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Tan, Piow Yon (2010) Line follower balbot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Tan, C. Y. and Ngui, Wai Keng and Leong, Mohd Salman and Lim, M. H. (2019) Blade fault diagnosis using empirical mode decomposition based feature extraction method. In: Engineering Applications Of Artificial Intelligence Conference (EAAIC 2018) , 3 - 5 Disember 2018 , Sabah, Malaysia. p. 1., 255. ISSN 2261-236X

Tan, Chin Giap (2016) The mechanical properties of microwave sewage sludge ash (MSSA) as partial cement replacement in concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Tan, Eijyne and Rishwaraj, G. and Ponnambalam, S. G. (2020) Development of a task-oriented, auction-based task allocation framework for a heterogeneous multirobot system. Sadhana, 45 (1). pp. 1-13. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Tan, F. Y. and Hassan, M. H. A. and Johari, N. H. and Omar, M. N. and Hasanudin, I. (2022) The effect of wearing soccer headgear on the head response in soccer heading. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). 10112--10120. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Tan, Qing Foong and Siti Zubaidah, Ismail (2019) Design, fabrication, and analysis of a smart mower. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 17-23. ISSN 2636-9575. (Published)

Tan, S. P. and M. A., Ramlan and M. S., Shaari and Takahashi, A. and Mohd Akramin, Mohd Romlay (2023) Microstructural and mechanical characterization of AlSi10Mg additively manufactured material using direct metal laser sintering technique. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 349 -360.. ISSN 2195-4356 ISBN 978-981191456-0

Tan , Boon Aik (2013) Study the applied voltage and wire speed influences on machining aluminium alloy 6061 using wire-EDM process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Tanjung, Faisal A. and Kuswardani, Retna A. and Idumah, Christopher I and Siregar, Januar Parlaungan and Karim, Abdul (2022) Characterization of mechanical and thermal properties of esterified lignin modified polypropylene composites filled with chitosan fibers. Polymers and Polymer Composites, 30. pp. 1-11. ISSN 0967-3911. (Published)

Tanti, Ali and Norfadzilah, Jusoh and R. A., Bakar and Teoh, S. J. and K., Kadirgama (2015) Thermal Effect of Thermal Energy Storage (TES) Tank for Solar Energy Application During Charging Cycle Based on the Grid Sensitivity Analysis. Energy Procedia, 79. pp. 245-251. ISSN 1876-6102 . (Published)

Tanti, Ali and R. A., Bakar and Gan, Leong Ming (2016) Investigation of Passenger Car Using Macpherson Strut for Front Suspension System PT.1: Vehicle Behavior Variation of Time Response. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished)

Tanti, Ali and R. A., Bakar and Gan, Leong Ming and Zarina, Amat Jafar (2017) Investigation of Passenger Car using Macpherson Strut for Suspension System pt.1: Vehicle Behaviour Variation of Time Response. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01072). ISSN 2261-236X

Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2013) Investigation of Potential Waste Insulating Material Properties with Different Heat Transfer Fluid for Thermal Storage Application. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2014) Study on Potential Waste Insulating Material Properties in Water for Thermal Storage Application. Advanced Materials Research, 903. pp. 139-144. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2014) Investigation of Excessive Material on Insulating Properties Using Different Heat Transfer Fluid for Thermal Energy Storage Development. Journal of Energy and Power Engineering, 8 (10). pp. 1673-1679. ISSN 1934-8975 (print); 1934-8983 (online). (Published)

Tarek, Abedin and Koh, Siaw Paw and Yaw, Chong Tak and Phing, Chen Chai and Tiong, Sieh Kiong and Tan, Jian Ding and Kharudin, Ali and Kadirgama, Kumaran and Benedict, Foo (2023) Vibration signal for bearing fault detection using random forest. In: Journal of Physics: Conference Series; International Conference on Emerging Electronic and Automation Technology 2022, ICEEAT 2022 , 10-11 December 2022 , Virtual, Online. pp. 1-21., 2467 (012017). ISSN 1742-6588

Tariq, Syed Qutoba and Asmelash, Mebrahitom and Saptaji, Kushendarsyah and Azmir, Azhari (2022) A review on peening processes and its effect on surfaces. The International Journal of Advanced Manufacturing Technology. pp. 4233-4270. ISSN 0268-3768 (Printed), 1433-3015 (online). (Published)

Tasiransurini, Ab Rahman (2019) Finite impulse response optimizers for solving optimization problems. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tasiransurini, Ab Rahman and Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Nor Hidayati, Abdul Aziz and Suad Khairi, Mohammed and Badaruddin, Muhammad and Zulkifli, Md. Yusof (2018) A Study on the Effect of Local Neighbourhood Parameter towards the Performance of SAFIRO. International Journal of Engineering & Technology, 7 (4.27). pp. 30-37. ISSN 2227-524X. (Published)

Taufif, Zakaria (2008) Dedicated fixture design for polishing of silicon. Faculty of Mechanica; Engineering, Universiti Malaysia Pahang.

Tengku Fakhruzzaman, Tengku Yusoff (2009) Computational analysis of heat transfer rate using thermal response factor method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tengku Mohd Hairil Azwan, Tengku Abdullah (2008) Design and development of exhaust gas calorimeter for gasoline/compressed-natural gas (CNG) hydraulic dynanometer engine (gacohyde) test-rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teo, S. H. and Gan, H. L. and Azri, Alias and Gan, Leong Ming (2018) Internally Heated Screw Pyrolysis Reactor (IHSPR) heat transfer performance study. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981

Teoh, S. J. and R. A., Bakar and Gan, Leong Ming (2013) Computational Analysis on Plug-in Hybrid Electric Motorcycle Chassis. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished)

Teoh, Yeong Chia (2009) Numerical simulation of single point diamond turning. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tesfamariam, Dawit Abay and Bayray, Mulu and Tesfay, Meseret and Hagos, F. Y. (2015) Modeling and Experiment of Solar Crop Dryer for Rural Application. Journal of Chemical and Pharmaceutical Sciences, Sp (9). pp. 109-118. ISSN 0974-2115 . (Published)

Tesfay, A. H. and Hagos, F. Y. and Yohannes, K. G. and Nydal, O. J. (2015) Preparing Side Charging of PCM Storage: Theoretical and Experimental Investigation. IOP Conference Series: Materials Science and Engineering, 100 (012021). pp. 1-13. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Tey, Fanny Pei Boon (2013) Power consumption of dosmetic refrigerator using nanoparticles Al2O3 lubricant mixture. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tezara, C. and Juliana, Jalaludin and Nor Mariah, Adam and Siregar, J. P. (2014) Assessment of Children’s Health and Indoor Air Contaminants of Day Care Centre in Industrial Area. Iranian J Publ Health, 43 (3). pp. 81-88. (Published)

Tezara, Cionita and Hadi, Agung Efriyo and Siregar, J. P. and Zalinawati, Muhamad and Mohammad Hazim, Mohamad Hamdan and Oumer, A. N. and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Fitriyana, Deni Fajar (2021) The effect of hybridisation on mechanical properties and water absorption behaviour of woven jute/ramie reinforced epoxy composites. Polymers, 13 (17). pp. 1-17. ISSN 2073-4360. (Published)

Thamir K., Ibrahim and M. M., Rahman (2012) Effect of Comparison Ration on Performance of Combined Cycle Gas Turbine. International Journal of Energy Engineering, 2 (1). pp. 9-14. ISSN 2163-1891 (Print); 2163-1905 (online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2013) Effects of Isentropic Efficiency and Enhancing Strategies on Gas Turbine Performance. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 383-396. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2015) Optimum Performance Improvements of the Combined Cycle Based on an Intercooler–Reheated Gas Turbine. Journal of Energy Resources Technology, 137. pp. 1-11. ISSN 0195-0738 (print); 1528-8994 (online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2013) Study on effective parameter of the triple-pressure reheat combined cycle performance. Thermal Science, 17 (2). pp. 497-508. ISSN 2334-7163. (Published)

Thamir K., Ibrahim and M. M., Rahman (2012) Thermal Impact of Operating Conditions on the Performance of a Combined Cycle Gas Turbine. Journal of Applied Research and Technology, 10 (4). pp. 567-577. ISSN 1665-6423. (Published)

Thamir K., Ibrahim and M. M., Rahman and Abdalla, Ahmed N. (2010) Study on The Effective Parameter of Gas Turbine Model with Intercooled Compression Process. Scientific Research and Essay , 5 (23). pp. 3760-3770. ISSN 1992-2248. (Published)

Thamir K., Ibrahim and M. M., Rahman and M. K., Mohamed and F., Basrawi (2016) Statistical Analysis and Optimum Performanceof the Gas Turbine Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Thamir K., Ibrahim and M. M., Rahman and Obed M., Ali and F., Basrawi and R., Mamat (2016) Optimum Performance Enhancing Strategies of the Gas Turbine Based on The Effective Temperatures. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-9., 38 (01002). ISSN 2261-236X

Thanachelvan, Rajan (2010) Rope climbing robot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Thet, Thet Mon (2011) Performance of Cryogenic Machining with Nitrogen Gas in Machining of Titanium. Applied Mechanics and Materials, 52 (54). pp. 2003-2008. ISSN 1662-7482. (Published)

Thien, Shiela Nga Ting (2009) 0910-F-021 effect of cutting speed and depth of cut on surface roughness of mild steel in turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thinakaran, Narayanan and Jeefferie, Abd Razak and Intan Sharida, Othman and Noraiham, Mohamad and Mohd Muzafar, Ismail and Ramli, Junid (2020) Mechanical properties and fracture morphological observation of recycled polypropylene (rPP) filled dried banana leaves fibre (DBLF) composites : effects of sodium hydroxide (NaOH) surface treatment. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 353-360.. ISSN 2195-4356 ISBN 9789811395390

Thinesh Chander, Sawalingam (2010) Design and development of micro EDM using micro actuator tool feed system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thiwaan Rao, Narasimma Naidu (2013) Cfd simulation of multiple array arrangement of micro hydro power turbines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thiwaan Rao, Narasimma Naidu (2018) Flow and heat transfer characteristics of supercritical carbon dioxide in mini-channels. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thong, Yee Han (2010) Preliminary design of single rubber belt with electro-mechanical continuously variable transmission (CVT). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thor, Wei Soon and M. Nafis, O. Z. (2022) Investigation of accuracy and response time in GPS-based car mileage monitoring device. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 42-49. ISSN 2637-0883. (Published)

Thotakura, Sandhya and Kondamudi, Sri Chandan and Xavier, J. Francis and Quanjin, Ma and Reddy, Guduru Ramakrishna and Gangwar, Pavan and Davuluri, Sri Lakshmi (2020) Operational performance of megawatt-scale grid integrated rooftop solar PV system in tropical wet and dry climates of India. Case Studies in Thermal Engineering, 18 (100602). pp. 1-11. ISSN 2214-157X. (Published)

Tie, K. H. and A., Senawi and Chuan, Z. L. (2022) An observation of different clustering algorithms and clustering evaluation criteria for a feature selection based on linear discriminant analysis. In: Enabling Industry 4.0 through Advances in Mechatronics. Lecture Notes in Electrical Engineering book series (LNEE), 800 . Springer Nature Singapore Ptd. Ltd., Singapore, pp. 497-505. ISBN 978-981-19-2094-3(Printed); 978-981-19-2095-0 (Online)

Ting, Swee Keong (2008) Crankcase analysis for two-stroke spark ignition engines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tiong, Chung Shia (2010) Computational laser micromachining for machining PMMA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tran, Ngoc Thang and Le, Quyet Van and Cuong, Nguyen Van and Nguyen, Trinh Duy and Huy Phuc, Nguyen Huu and Phuong, Pham T.T. and Monir, Minhaj Uddin and Azrina, Abd Aziz and Truong, Quang Duc and Sumaiya, Zainal Abidin and Nanda, Sonil and N. Vo, Dai-Viet La-doped cobalt supported on mesoporous alumina catalysts for improved methane dry reforming and coke mitigation. Journal of the Energy Institute. (Published)

Tran, Ngoc Thang and P. Senthil, Kumar and Le, Quyet Van and Cuong, Nguyen Van and Phuong, Pham T. T. and A. A., Jalil and Sharma, Gaurav and Kumar, Amit and Sharma, Ajit and Ayodele, Bamidele Victor and Sumaiya, Zainal Abidin and Vo, Dai‑Viet N (2021) CO2 reforming of CH4 on mesoporous alumina‑supported cobalt catalyst: optimization of lanthana promoter loading. Topics in Catalysis. pp. 1-11. (Published)

Tresna Priyana, Soemardi and Agri, Suwandi and Cholid, Badri and Anwar Soefi, Ibrahim and Sastra Kusuma, Wijaya and Siregar, J. P. (2019) Development of total hip joint replacement prostheses made by local material : an introduction. In: E3S Web of Conferences; 1st International Conference on Automotive, Manufacturing, and Mechanical Engineering, IC-AMME 2018 , 26 - 28 September 2018 , Bali, Indonesia. pp. 1-9., 130 (01032). ISSN 2555-0403

Tuan Mohammad Yusoff, Tuan Ya and Sabir, O. and Norhafizan, Ahmed and Y., Nukman (2013) A Two Pressure-Velocity Approach for Immersed Boundary Methods in Three Dimensional Incompressible Flows. In: International Conference on Mechanical Engineering Research (ICMER2013), , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Turan, Faiz Mohd Systematic sustainability assessment (SSA) for conceptual design phase in Malaysia automotive industry. , [Research Report: Research Report] (Unpublished)

U

UMP, . (2011) ICMER bincang isu kejuruteraan mekanikal dan automotif. CREATE . p. 16. ISSN 1823-7487

UMP, . (2013) MBM,UMP jalin kerjasama latih pakar tempatan. Berita Harian .

UMP, . (2011) Malaysia hab syarikat automotif Australia. Utusan Malaysia .

UMP, . (2015) Persidangan Mekanikal UMP perkasa bidang kejuruteraan automotif. Berita Harian .

UMP, . (2015) Semarak bidang mekatronik. Harian Metro .

UMP, . (2015) Terowong angin pelbagai guna. Utusan Malaysia .

UMP, . (2014) Terowong angin pelbagai guna. Berita Harian .

UMP, . (2013) UMP meterai MoU dengan Mercedes-Benz. Utusan Malaysia .

UMP, . (2011) UMP peneraju ICoE dalam bidang acuan tekap dan sistem suspensi. CREATE . p. 35. ISSN 1823-7487

UMP, . (2011) UMP, MAI jalin kerjasama tingkat daya saing industri automotif tempatan. CREATE (34). ISSN 1823-7487

UMP, PNC 4 Mechatronic undergraduates offered places in Germany. Pekan Review, 9 . p. 57. ISSN 2180-3099

UMP, PNC ICMER discusses issues in mechanical and automotive engineering. Pekan Review, 5 . p. 46. ISSN 2180-3099

UMP, PNC (2014) Mohd Ihsan bukti graduan UMP mampu urus projek di luar negara. CREATE . p. 39. ISSN 1823-7487

UMP, PNC (2015) Persidangan Antarabangsa Mekanikal UMP perkasa bidang kejuruteraan automotif. CREATE . p. 14. ISSN 1823-7487

UMP, PNC (2017) UMP cipta mesin potong mengkuang. Harian Metro . p. 10.

UMP, PNC (2015) UMP lahir graduan perintis program dwiijazah Mekatronik hasil kerjasama dengan HsKA. CREATE . p. 6. ISSN 1823-7487

UMP, PNC (2019) UMP researchers invented stingless bee honey suction pump for more quality produce. UMP News . (Unpublished)

Ukasyah Zulfaqar, Shahrulakmar and Mohd Nadzeri, Omar and Nasrul Hadi, Johari (2023) Brief review on recent advancement of computational analysis on hemodynamics in peripheral artery disease. In: Technological Advancement in Instrumentation & Human Engineering. Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 555-572., 882. ISSN 1876-1100 ISBN 978-981191576-5

Ukasyah Zulfaqar, Shahrulakmar and Nasrul Hadi, Johari and Muhammad Firdaus, Mohd Fauzi and Juhara, Haron and Nadarajan, Chandran and Mohd Nadzeri, Omar (2023) Numerical approach for the evaluation of hemodynamic behaviour in peripheral arterial disease : A systematic review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 95-117. ISSN 2289-7879. (Published)

Ul Ferdous, Imam and Nasrul Azuan, Alang and Juliawati, Alias (2022) A review on creep deformation and damage mechanism of grade 91/92 steels. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 159..

Ullah, Wasif and Mohd Fadzil Faisae, Ab Rashid and Muhammad Ammar, Nik Mu’tasim (2023) Modeling and optimization of cost-based hybrid flow shop scheduling problem using metaheuristics. International Journal of Global Optimization and Its Application, 2 (4). pp. 244-254. ISSN 2948-4030. (Published)

Umar, Shafee (2009) Grid sensitivity study of in-cylinder engine meshing appropriate for flow and combustion analysis using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Umar Zakir, Abdul Hamid and Mohammad Hatta, Mohammed Ariff and Hairi, Zamzuri and Saito, Yuichi and Muhammad Aizzat, Zakaria and Mohd Azizi, Abdul Rahman and Raksincharoensak, Pongsathorn (2018) Piecewise Trajectory Replanner for Highway Collision Avoidance Systems with Safe-Distance Based Threat Assessment Strategy and Nonlinear Model Predictive Control. Journal of Intelligent and Robotic Systems: Theory and Applications, 90 (3-4). pp. 363-385. ISSN 1573-0409. (Published)

Ummu Atirah , Hanipah (2012) Study the energy recovery in acrylic boiler /. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ummu Kulthum, Jamaludin and Docherty, Paul D. and Chase, J. Geoffrey and Le Compte, Aaron and Shaw, Geoffrey M. and Desaive, Thomas and Preiser, Jean-Charles (2012) Observation of Incretin Effects During Enteral Feed Transitions of Critically Ill Patients. e-SPEN Journal, 7 (4). pp. 154-159. ISSN 1751-4991. (Published)

Ummu Kulthum, Jamaludin and Docherty, Paul D. and Chase, J. Geoffrey and Shaw, Geoffrey M. (2015) Impact of Haemodialysis on Insulin Kinetics of Acute Kidney Injury Patients in Critical Care. Journal of Medical and Biological Engineering, 35 (1). pp. 125-133. ISSN 1609-0985 (print); 2199-4757 (online). (Published)

Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Normy Norfiza, A. Razak and Azrina, M. Ralib and Mohd Basri, Mat Nor (2017) Estimation of Plasma Insulin and Endogenous Insulin Secretion in Critically Ill Patients Using ICING Model. Advanced Science Letters, 23 (6). pp. 5511-5514. ISSN 1936-6612. (Published)

Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Normy Norfiza, A. Razak and Azrina, Md Ralib and Mohd Basri, Mat Nor and Pretty, Christopher G. and Luqman, Humaidi (2018) Performance of stochastic targeted blood glucose control protocol by virtual trials in the Malaysian intensive care unit. Computer Methods and Programs in Biomedicine, 162. pp. 149-155. ISSN 0169-2607. (Published)

Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Normy Norfiza, A. Razak and Fatimah, Dzaharudin and Azrina, M. Ralib and Mohd Basri, Mat Nor (2016) Mathematical Modelling of Glucose-Insulin System Behaviour in Hospital Tengku Ampuan Afzan Intensive Care Unit Patients. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10899-10903. ISSN 1819-6608. (Published)

Ummu Kulthum, Jamaludin and Fatimah, Dzaharudin and Normy Norfiza, A. Razak and L. H., Shah and W. Zuhriraihan, W. M. Zulkifly and Fatanah, M. Suhaimi and Azrina, Md. Ralib and Mohd Basri, Mat Nor and Christopher, G. Pretty (2017) Performance of STAR Virtual Trials for Diabetic and Non-Diabetic in HTAA Intensive Care Unit. In: IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES) , 4-8 December 2016 , Kuala Lumpur. pp. 193-198.. ISBN 9781467377911

Urmi, W. T. and M. M., Rahman and Safiei, W. and Kadirgama, K. and Maleque, M. A. (2022) Effects of minimum quantity lubrication technique in different machining. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). 135 -159. ISSN 2289-7879. (Published)

Urmi, Wajiha Tasnim and M. M., Rahman and Azmi, W. H. and K., Kadirgama and D., Ramasamy and Maleque, M. A. (2020) Experimental Investigation on the Stability of 40% Ethylene Glycol Based TiO2-Al2O3 Hybrid Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879. (Published)

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and Zetty Akhtar, Abd Malek and Wahaizad, Safiei (2022) A comprehensive review on thermal conductivity and viscosity of nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (2). pp. 15-40. ISSN 2289-7879. (Published)

Usaid, Ahmed Shakil and Shukur, Hj. Abu Hassan and Mohd Yazid, Yahya and Mohd Ruzaimi, Mat Rejab (2022) A focused review of short electrospun nanofiber preparation techniques for composite reinforcement. Nanotechnology Reviews, 11 (1). pp. 1991-2014. ISSN 2191-9089. (Published)

Usman, Fahad and Kamarul Hawari, Ghazali and Razali, Muda and Dennis, John Ojur and Ibnaouf, Khalid Hassan and Aldaghri, Osamah A. and Alsadig, Ahmed and Nasrul Hadi, Johari and Rajan, Jose (2023) Detection of kidney complications relevant concentrations of ammonia gas using plasmonic biosensors : A review. Chemosensors, 11 (119). pp. 1-24. ISSN 2227-9040. (Published)

Usman, Fahad and Kamarul Hawari, Ghazali and Razali, MudaJohari, and Nasrul Hadi, Johari and Dennis, John Ojur and Tamam, Nissren M. and Sulieman, Abdelmoneim Adam Mohamed and Ji, Yuanfa (2023) Magnetoresistance and magneto-plasmonic sensors for the detection of cancer biomarkers : A bibliometric analysis and recent advances. Sensors and Actuators Reports, 6 (100172). pp. 1-17. ISSN 2666-0539. (Published)

Usri, N. A. and Azmi, W. H. and R., Mamat and Abdul Hamid, K. and Najafi, G. (2015) Heat Transfer Augmentation of Al2O3 Nanofluid in 60:40 Water to Ethylene Glycol Mixture. Energy Procedia, 79. pp. 403-408. ISSN 1876-6102 . (Published)

V

Vaka, Mahesh and Mohammad, Khalid and Paul, John (2023) A review of different models, mechanisms, theories and parameters in tuning the specific heat capacity of nano-phase change materials. Journal of Energy Storage, 72 (108678). pp. 1-16. ISSN 2352-152X. (Published)

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim and Muhamad Arifpin, Mansor (2014) Mechanical Properties Of The Friction Stir Welded Dissimilar Aluminium Alloy Joints. International Journal of Mechanical and Production Engineering (IJMPE), 2 (5). pp. 1-5. ISSN 2320-2092. (Published)

Vasu, Anusuiah and Hagos, F. Y. and M. M., Noor and R., Mamat and Azmi, W. H. and Abdul Adam, Abdullah and Ibrahim, Thamir K. (2017) Corrosion Effect of Phase Change Materials in Solar Thermal Energy Storage Application. Renewable and Sustainable Energy Reviews, 76. pp. 19-33. ISSN 1364-0321. (Published)

Vasu, Anusuiah and Hagos, F. Y. and R., Mamat and Kaur, Jesbains and M. M., Noor (2019) The effect of thermal cyclic variation on the thermophysical property degradation of paraffin as a phase changing energy storage material. Applied Thermal Engineering, 149. pp. 22-33. ISSN 1359-4311. (Published)

Vaughan, A. and Davis, D. S. and Hagadorn, J. R. and Salwani, Mohd Salleh (2017) Industrial Catalysts for Alkene Polymerization. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, pp. 1-18. ISBN 978-0-12-803581-8

Vignesh, P. and Jayaseelan, Veerasundram and Pugazhendiran, P. and Prakash, M. Sathya and Sudhakar, Kumarasamy (2022) Nature-inspired nano-additives for Biofuel application – A Review. Chemical Engineering Journal Advances, 12 (100360). pp. 1-13. ISSN 2666-8211. (Published)

Vignesh, Palani and Pradeep Kumar, A. R. and Ganesh, N. S. and Jayaseelan, V. and Sudhakar, K. (2021) Biodiesel and green diesel generation: An overview. Oil and Gas Science and Technology, 76 (6). pp. 1-15. ISSN 1294-4475. (Published)

Vijayakumar, Marimuthu (2010) CFD analysis of air intake system of 1.6 l Proton Waja engine by adding guide vanes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Viknesh, Punichelvan (2013) Design and implementation of flywheel energy storage system for supporting critical load. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Viswanatha Sharma, Korada and Azmi, W. H. and Bakar, R. A. and Noor, M. M. and Kadirgama, Kumaran and Reddy Prasad, D. M. (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. , [Research Report: Research Report] (Unpublished)

Vivekanandan, Panneerselvam and Faiz, Mohd Turan (2020) Multi Response Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 252-264.. ISBN 978-981-13-9539-0

Vivekanandan, Panneerselvam and Faiz, Mohd Turan (2021) Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 247-260.. ISBN 978-981-15-7309-5

Vorathin, E. and Mohd Hafizi, Zohari and S. A., Che Ghani and Siregar, J. P. and K. S., Lim (2018) FBGs Real-Time Impact Damage Monitoring System of GFRP Beam Based on CC-LSL Algorithm. International Journal of Structural Stability and Dynamics, 18 (5). p. 1850075. ISSN 0219-4554. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and K. S., Lim (2019) Temperature-insensitive pressure transducer based on reflected broadened spectrum with enhanced sensitivity. Sensors and Actuators: A Physical, 288. pp. 61-66. ISSN 0924-4247. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and K. S., Lim (2018) A highly sensitive multiplexed FBG pressure transducer based on natural rubber diaphragm and ultrathin aluminium sheet. Optics & Laser Technology, 106. pp. 177-181. ISSN 0030-3992. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and M. K. A., Zaini and K. S., Lim (2019) A Novel Temperature-Insensitive Hydrostatic Liquid-Level Sensor Using Chirped FBG. IEEE Sensors Journal, 19 (1). pp. 157-162. ISSN 1530-437X. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and M. K. A., Zaini and K. S., Lim (2019) Temperature-independent chirped FBG pressure transducer with high sensitivity. Optics and Lasers in Engineering, 117. pp. 49-56. ISSN 0143-8166. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and K. S., Lim (2018) A natural rubber diaphragm based transducer for simultaneous pressure and temperature measurement by using a single FBG. Optical Fiber Technology, 45. pp. 8-13. ISSN 1068-5200. (Published)

Vorathin, E. and Z. M., Hafizi and N., Ismail and M., Loman and A. M., Aizzuddin and K. S., Lim and H., Ahmad (2019) FBG Water-Level Transducer Based on PVC-Cantilever and Rubber-Diaphragm Structure. IEEE Sensors Journal, 19 (17). pp. 7407-7414. ISSN 1530-437X. (Published)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and K. S., Lim (2016) Real-time Monitoring System of Composite Aircraft Wings Utilizing Fibre Bragg Grating Sensor. In: IOP Conference Series: Materials Science and Engineering, AEROTECH VI - Innovation in Aerospace Engineering and Technology , 8–9 November 2016 , Kuala Lumpur, Malaysia. pp. 1-9., 152 (012024). ISSN 1757-8981 (Print), 1757-899X (Online)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and Kian, Sheng Lim (2016) The Use of Real-Time Monitoring System Utilizing Single Fibre Bragg Grating Sensor for Composite Plate under Static Loading. In: International Conference on Environmental Technology and Management (ICETM 2016) , 19-20 August 2016 , Kuala Lumpur, Malaysia. pp. 1-13.. (Unpublished)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and Lim, Kok Sing and A. M., Aizzuddin (2017) The use of an improved technique to reduce the variability of output voltage in real-time Fibre Bragg Grating based monitoring system. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , The Swiss Garden Beach Resort, Kuantan. pp. 1-11., 257 (012001). ISSN 1757-8981 (Print); 1757-899X (Online)

Vorathin, Epin (2017) Improved static and dynamic FBG sensor system for real-time monitoring of composite structures. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

W

W., Anggono and M. M., Noor and S., Liao and K., Sanka and G. J., Gotama and Sutrisno, . and F. D., Suprianto (2022) Effects of extraction methods on the fuel characteristics and diesel engine performances of jatropha curcas biodiesel. Science and Engineering Ethics, 84 (4). pp. 29-39. ISSN 1353-3452 (Print); 1471-5546 (Online). (Published)

W., Safiei and M. M., Rahman and A. R., Yusoff and M. Y., Ali (2023) Wear Behaviour of Tungsten Carbide in End Milling Process of Aluminium Alloy 6061-T6 with Minimal Quantity of Tri-hybrid Nanofluids. In: 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering Conference , 27-28 Oktober 2022 , Surakarta, Indonesia. pp. 21-32.. ISSN 2195-4356

W. A. W., Muhamad and R., Ngah and M. F., Jamlos and P. J., Soh and M. A., Jamlos and H., Lago (2016) Antenna Array Bandwidth Enhancement using Polymeric Nanocomposite Substrate. Applied Physics A, 122 (426). pp. 1-9. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

W. B., Santoso and R. A., Bakar and Nur, A. (2013) Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine at Low Load. Energy Procedia, 32. pp. 3-10. ISSN 1876-6102 . (Published)

W. H., Azmi and K., Abdul Hamid and A. I., Ramadhan and A. I. M., Shaiful (2021) Thermal hydraulic performance for hybrid composition ratio of TiO2–SiO2 nanofluids in a tube with wire coil inserts. Case Studies in Thermal Engineering, 25 (100899). pp. 1-14. ISSN 2214-157X. (Published)

W. H., Azmi and S. N. M., Zainon and K. A., Hamid and R., Mamat (2019) A review on thermo-physical properties and heat transfer applications of single and hybrid metal oxide nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5182-5211. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Athikary, B. and M. S. M., Sani (2020) Correlating finite element model of a car spot-welded front-end module in the light of modal testing data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7974 -7984. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani and M. S., Mohd Zin (2019) The prediction of the dynamic behaviour of a structure using model updating and frequency based substructuring. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-7., 506 (012011). ISSN 1757-8981 (Print), 1757-899X (Online)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Rina, Febrina and M. S. M., Sani (2020) Estimating rotational FRFs of a complex structure using FE model updating, mode expansion and FRF synthesis method. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology , 29-30 August 2019 , Malahayati University, Lampung, Indonesia. pp. 1-12., 807 (012045). ISSN 1757-8981 (Print), 1757-899X (Online)

W. M., Asyraf and Vasu, Anusuiah and Hagos, F. Y. and M. M., Noor and R., Mamat (2017) Transient Modelling of Heat Loading of Phase Change Material for Energy Storage. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12., 90 (01078). ISSN 2261-236X

W. N., Maawa and R., Mamat and I. M., Yusri and Febrina, R. (2019) Effect of emulsified palm oil biodiesel-diesel blends to the combustion characteristics of compression ignition engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012080). ISSN 1757-899X

W. N., Maawa and R., Mamat and I. M., Yusri and Yasar, M. (2019) Experimental Investigation on the Engine Performance and Exhaust Emissions of Emulsified Palm Biodiesel Blends on a Diesel Engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012114). ISSN 1757-899X

W. N., Mawaa and R., Mamat and G., Najafi and Obed M., Ali and A., Aziz (2015) Engine Performance and Emission of Compression Ignition Engine Fuelled With Emulsified Biodiesel-Water. In: IOP Conference Series: Materials Science and Engineering : International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-7., 100 (012061). ISBN 1757-8981 (print); 1757-899X (online)

W. N. W. M. N., Hissyam and Aiman, Mohd Halil and Kurniawan, Tedi and M., Ishak and Ariga, T. (2017) Effect of copper-based fillers composition on spreading and wetting behaviour. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (1). ISSN 17578981

W. S., Wan Harun and Kamariah, M. S. I. N. and N., Muhamad and S. A., Che Ghani and F., Ahmad and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

W. S., Wan Harun and Kamariah, M. S. I. N. and Norhamidi, Muhamad and S. A., Che Ghani and Ahmad, Faiz and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

W. S., Wan Harun and Nursyawani, Manam and Nurul Kamariah, Md Saiful Islam and Safian, Sharif and Ahmad Hafiz, Zulkifly and Ishtiaq, Ahmad and Miura, Hideshi (2018) A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technology, 331. pp. 74-97. ISSN 0032-5910. (Published)

W. S., Wan Harun and R. I. M., Asri and F. R. M., Romlay and S., Sharif and N. H. M., Jan and F., Tsumori (2018) Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel. Journal of Alloys and Compounds, 748. pp. 1044-1052. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

W. S., Wan Harun and Rahil Izzati, Mohd Asri and Abu Bakar, Sulong and S. A., Che Ghani and Z., Ghazalli (2018) Hydroxyapatite-Based Coating on Biomedical Implant. In: Hydroxyapatite - Advances in Composite Nanomaterials, Biomedical Applications and Its Technological Facets. InTech, pp. 69-88. ISBN 978-953-51-3805-1

W. X., Hong and A. N., Oumer and F., Basrawi and R., Mamat and Abdul Adam, Abdullah (2018) Investigation on heat transfer characteristics and flow performance of methane at supercritical pressures. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES2018) , 1-2 March 2018 , Perpustakaan UMP Pekan, Universiti Malaysia Pahang. pp. 1-9.. ISSN 1757-8981 (Print), 1757-899X (Online)

Wafiuddin, Md Ghazali and Daing Mohamad Nafiz, Daing Idris and Azizul Helmi, Sofian and F., Basrawi and Thamir K., Ibrahim (2017) Investigation on wear characteristic of biopolymer gear. In: 4th International Conference On Mechanical Engineering Research , August 1-2, 2017 , Swiss Garden Beach Resort, Kuantan Pahang. pp. 1-9.. (Unpublished)

Wafiuddin, Md Ghazali and Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Nurazima, Ismail and Azizul Helmi, Sofian (2016) Design and Analysis of Tooth Impact Test Rig for Spur Gear. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. R., Radin (2020) Preparation, stability and wettability of nanofluid: a review. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). 7244 -7257. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and Wajiha Tasnim, Urmi and Zetty Akhtar, Abd Malek (2021) Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 111-125. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and Kulkarni, R. R. and Md Noor, Ariffin and Zetty Akhtar, Abd Malek (2020) Thermal Conductivity and Dynamic Viscosity of Nanofluids: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (2). pp. 66-84. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and M. A., Hadi and W. H., Azmi and M. N., Arifin (2021) Experimental Investigation on Preparation and Stability of Al2O3 Nanofluid In Deionized Water and Ethylene Glycol. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 47-62. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and Musfirah, Abdul Hadi and Maleque, M. A. and Singh, R. (2021) Experimental study on dynamic viscosity of aqueous-based nanofluids with an addition of ethylene glycol. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012094). ISSN 1757-899X

Wahaizad, Safiei and M. M., Rahman and Siti Aishah, Rusdan (2018) Experimental investigation of MQL Optimum Parameters In End Milling of AA6061-T6 using Taguchi Method. International Journal of Engineering & Technology, 7 (4.35). pp. 186-189. ISSN 2227-524X. (Published)

Wai, Loon Cheor and Azremi, Abdullah Al-Hadi and Ping, Jack Soh and Mohd Faizal, Jamlos and Mohamed Elshirkasi, Ahmed and Chen, Xiaoming and Akkaraekthalin, Prayoot (2021) A decoupling network for resonant and non-resonant sub-1 GHz MIMO mobile terminal antennas with improved compactness and efficiency. IEEE Access, 9 (9405996). 59475 -59485. ISSN 2169-3536. (Published)

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Md Abdul, Maleque (2020) An overview on synthesis, stability, opportunities and challenges of nanofluids. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 30-37., 41 (168124). ISSN 2214-7853

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and Wahaizad, Safiei and Kumaran, Kadirgama and Md Abdul, Maleque (2022) Effects of minimum quantity lubrication technique in different machining processes - a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 135-159. ISSN 2289-7879. (Published)

Wali, Qamar and Iftikhar, Faiza Jan and Elumalai, Naveen Kumar and Iqbal, Yaseen and Yousaf, Sidra and Iqbal, Shahid and Rajan, Jose (2020) Advances in stable and flexible perovskite solar cells. Current Applied Physics, 20 (5). pp. 720-737. ISSN 1567-1739. (Published)

Wali, Qamar and Iftikhar, Faiza Jan and Khan, Muhammad Ejaz and Ullah, Abid and Iqbal, Yaseen and Rajan, Jose (2020) Advances in stability of perovskite solar cells. Organic Electronics, 78 (105590). ISSN 1566-1199. (Published)

Wan Ahmad Amilin, Tengah @ Wan Ngah (2009) Design and analysis a control system for 3 axis mechanism machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Ahmad Najmi, Wan Mohamed and Mohd. Azeem, Suhaimi and Irnie Azlin, Zakaria and Wan Azmi, Wan Hamzah (2021) Electro-thermal characteristics of hybrid TiO2-SiO2 nanofluid coolants in an electrically-active system. Scientific Research Journal, 18 (1). pp. 209-225. ISSN 1675-7009. (Published)

Wan Ahmad Syafiq, Wan Ghafar (2013) Modeling, simulation and experimental verification of variable parameter of suspension spring. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wan Anuar, Wan Hassan and Kahar, Osman and Mohammed Rafiq, Abdul Kadir and Wan Ahmad Kamil, Wan Abdullah and Juhara, Haron and Mohd Zamani, Ngali (2012) Effect of anastomosis angle on hemodynamic of side-to-end radiocephalic arteriovenous fistula (RCAVF). In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 665-670., 1440 (665). ISSN 0094-243X

Wan Asilah, Wan Muhamad and Razali, Ngah and Mohd Faizal, Jamlos and Ping, Jack Soh and Mohd Tarmizi, Ali (2017) Bandwidth Enhancement using Polymeric Grid Array Antenna for Millimeter-Wave Application. Applied Physics A, 123 (69). pp. 1-5. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Wan Asilah, Wan Muhamad and Razali, Ngah and Mohd Faizal, Jamlos and Ping, Jack Soh and Mohd Tarmizi, Ali and Narbudowicz, Adam (2017) Bandwidth Enhancement of a Multilayered Polymeric Comb Array Antenna for Millimeter-Wave Applications. Applied Physics A, 123 (105). pp. 1-4. ISSN 0947-8396(print); 1432-0630(online). (Published)

Wan Azhar, Wan Yusoff and Nafrizuan, Mat Yahya and Azlyna, Senawi (2007) Tuning of Optimum PID Controller Parameter using Particle Swarm Optimization Algorithm Approach. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

Wan Azhar, Wan Yusoff and Nur Shafiza Afzan, Sharif and Julie J., Mohamed and Hutagalung, Sabar Derita and Zainal Arifin, Ahmad and Mohd Zulkifly, Abdullah and Hasmaliza, Mohamad (2014) The Effect of Sintering Conditions on the Microstructure and Electrical Properties of Pb(Zr0.52Ti0.48)O3 Ceramic. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 901-906. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff (2015) Integrated chatter avoidance and minimum quantity lubrication conditions for chatter vibration problem in the machining process. In: Advanced Manufacturing Processing Technology(AMPT2015) , 20-21 November 2015 , Madrid, Spain. p. 1.. (Submitted)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff and Muhammad Adib, Shaharun (2015) Effect of lubrication conditions to the cutting force coefficients in machining process. Advanced Materials Research, 1115. pp. 55-58. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Wan Fadzlina, Wan Muhd Shukeri and Ummu Kulthum, Jamaludin and Mohd Basri, Mat-Nor and Azrina, Md. Ralib (2021) Model-based insulin sensitivity as a new biomarker of sepsis diagnosis in the intensive care unit. IIUM Medical Journal Malaysia, 20 (2). pp. 19-26. ISSN 2735-2285. (Published)

Wan Hafizee , Wan Zulkiflee (2012) Design and development of noise reduction device for hand drilling machine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Wan Hanisah, Wan Ibrahim and Nurul Amirah, Mohd Faizal and N. N., Mazlan and N. S., Hariyanto and Ruwaida, Abdul Rasid (2023) Smart home aquaponic system monitoring and control with internet of things using mobile application. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 9 (1). pp. 20-25. ISSN 2600-7347 (Printed); 0126-8139. (Published)

Wan Hasbullah, Mohd Isa and Hunt, Andres and HosseinNia, S. Hassan (2019) Active sensing methods of ionic polymer metal composite (IPMC) : Comparative study in frequency domain. In: RoboSoft 2019 - 2019 IEEE International Conference on Soft Robotics , 14-18 April 2019 , Seoul. pp. 546-551. (8722790). ISBN 978-153869260-8

Wan Hasbullah, Mohd Isa and Hunt, Andres and HosseinNia, S. Hassan (2019) Sensing and self-sensing actuation methods for ionic polymer–metal composite (IPMC) : a review. Sensors, 19 (18). ISSN 1424-8220. (Published)

Wan Iryana, Wan Md Nor (2017) Wrinkling prediction in deep drawing metal forming : kinematic hardening model versus mixed hardening model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Iryana, Wan Md Nor and Jasri, Mohamad (2015) Finite Element Simulation to Predict Wrinkling in Low Carbon Steel Deep Drawing Process Using Isotropic Model. In: 2nd International Conference on Mechanical Design and Manufacturing (ICMDM 2015) , 27-28 Disember 2015 , Phuket, Thailand. pp. 1-4.. (Unpublished)

Wan Mohamad Azam, Wan Mahmod (2013) A study on the effect of the flow rate on the power produced by the pico hydropower. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Ariff, Wan Azli (2012) Single objective optimization of EDM machining on titanium workpiece using Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Asyraf, Wan Mohd Razali (2013) The potential of damages induced by wind speed. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Wan Mohd Azlan, Wan Mohd Nowalid (2019) Integration chatter avoidance and minimum quantity lubrication condition in machining process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Mohd Hazwan, Wan Ariff (2012) Video imaging study of ethanol- gasoline blends fuel spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Nafis, Wan Lezaini (2019) Precision motion and energy exchange control on robot’s leg interaction with soft surface. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Mohd Nafis, Wan Lezaini and Addie Irawan, Hashim and A. R., Razali (2018) Impedance control approach on leg motion speed variation on soft surface interaction. International Journal of Engineering & Technology, 7 (4.27). pp. 1-6. ISSN 2227-524X. (Published)

Wan Mohd Nafis, Wan Lezaini and Addie Irawan, Hashim and A. R., Razali and Abdul Hamid, Adom (2017) Hybrid Antiwindup-Fuzzy Logic Control for an Underactuated Robot Leg Precision Motion. In: 3rd IEEE International Symposium in Robotics and Manufacturing Automation (ROMA 2017) , 19-21 September 2017 , Universiti Putra Malaysia, Malaysia. , 2017.

Wan Mohd Noor, Che and Rizalman, Mamat and Muhammad Yusri, Ismail and Wan Nurdiyana, Wan Mansor and Sheikh, Alif (2021) Performance and emission control of using steam injection on medium-speed marine diesel engine running with biodiesel fuel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (2). 10 -23. ISSN 2289-7879. (Published)

Wan Mohd Saifuddin, W Zamani (2010) Active sway control of a gantry crane system using delayed feedback signal controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Wan Muhammad Mukhlis, Wan Ab Latif (2010) Numerical simulation of liquid atomisation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Mukhlis, Wan Sallehuddin (2008) Development of automatic fish grading machine especially for catfish with low time consumption and low capacity usage. Faculty of Mechanical Engineering, University Malaysia Pahang.

Wan Muhammad Noor Sarbani, Mat Daud (2022) Graphene additive effects on diesel blend fuels for performance, combustion and emissions on diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Adnin, Hamidi).

Wan Muhammad Noor Sarbani, Mat Daud and Mohd Adnin, Hamidi and Rizalman, Mamat and Daing Mohamad Nafiz, Daing Idris (2023) A prediction of graphene nanoplatelets addition effects on diesel engine emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10758-10766. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Wan N., Wan Ab Naim and Mohd J. Mohamed, Mokhtarudin and Einly, Lim and Bee, T. Chan and Azam, Ahmad Bakir and Nik A., Nik Mohamed (2020) The study of border zone formation in ischemic heart using electro-chemical coupled computational model. International Journal for Numerical Methods In Biomedical Engineering, 35 (11). pp. 1-15. ISSN 2040-7939 (print); 2040-7947 (online). (Published)

Wan Naimah, Wan Ab Naim and Mohd Jamil Mohamed, Mokhtarudin and Bee, Ting Chan and Einly, Lim and Azam, Ahmad Bakir and Nik Abdullah, Nik Mohamed (2021) The study of myocardial ischemia-reperfusion treatment through computational modelling. Journal of Theoretical Biology, 509 (110527). pp. 1-11. ISSN 0022-5193. (Published)

Wan Nor Maawa, Wan Ghazali (2020) Performance, combustion and emissions analysis of water emulsified biodiesel in a diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Nur, Suzilla and Mahmood, Syed and Rajaletchumy, Veloo Kutty (2020) Nanomedicine using Quercus infectoria Extract for the treatment of Breast Cancer. In: International Conference on Drug Delivery and Formulations , 8-15 May 2020 , Edinburgh, Scotland. pp. 1-17..

Wan Nur Azhani, Wan Samsudin and Mohd Harizan, Zul and Mohd Zamri, Ibrahim and Rohana, Abdul Karim (2022) Kelulut honey-filled pots detection using image processing based techniques. Indonesian Journal of Electrical Engineering and Computer Science, 28 (2). pp. 1028-1036. ISSN 2502-4752. (Published)

Wan Nurlisa, Wan Ahmad (2013) Analysis on the performance of adsorption route in a tropical region. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Nurlisa, Wan Ahmad and Mohd Azrul Hisham, Mohd Adib and Irdayanti, Mat Nashir and Txi, Mon Redee Sut and Fatin Nurfatehah, Mat Salleh and Tang, Jing Rui (2023) Anxiety status of junior archers in COVID-19 during training isolation period towards the shooting performance. International Journal of Public Health Science, 12 (1). pp. 361-370. ISSN 2252-8806. (Published)

Wan Nurlisa, Wan Ahmad and Mohd Azrul Hisham, Mohd Adib and Sut Txi, Mon Redee (2022) Enhanced the anxiety monitoring system among athletes with IoT for sports performance : A review. Journal of Physical Education and Sport, 22 (344). pp. 2700-2707. ISSN 2247-8051. (Published)

Wan Robaah, W Ahmad (2008) A DC motor controller using PID algorithm implementation on PIC. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Wan Ruslan, Wan Yusoff and Ismayuzri, Ishak and Fadhlur Rahman, Mohd Romlay (2022) Cubic spline interpolations in CNC machining. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 253-261., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Wan Sofian, Wan Hamat and M. F., Ghazali and Priyandoko, Gigih (2016) Ultrasonic Guided Wave Method For Crack Detection In Buried Plastic Pipe. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00012). ISSN 2261-236X

Wan Sulaiman, Wan Mohamad (2011) A study of energy utilisation in a variable link length 3 DOF revolute articulated manipulator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Syahirah, Wan Samsudin and Rosdiyana, Samad and Kenneth, Sundaraj and Mohd Zaki, Ahmad (2018) Determination of Forehead Lesion in Facial Paralysis using Gabor Filter. In: Proceedings: World of Multidisciplinary Research and Application Conference (WOMRAC 2018) , 17-19 April 2018 , Kota Kinabalu, Sabah, Malaysia. pp. 1-8.. ISBN 978-967-2348-11-5

Wan Zateel Aqmaer, Wan Ab Halim and Ramli, Junid and Norazlianie, Sazali and Siregar, Januar Parlaungan and Jeefferie, Abd Razak and Deni Fajar Fitriyana, . and Cionita, Tezara and Jamiluddin, Jaafar (2024) Enhancement of flexural modulus and strength of epoxy nanocomposites with the inclusion of functionalized GNPs using Tween 80. Journal of Engineering and Applied Sciences, 71 (69). pp. 1-14. ISSN 1816-949X. (Published)

Wang, Kai and Wang, Ding Yang and Wang, Meng Zhu and Dan, Xin Xin and Che, Li Ming and Xu, Hui Huang and Zhou, Hua and Liu, Hong and Singh, Lakhveer and Wu, Xue E. (2020) Functional photothermal sponges for efficient solar steam generation and accelerated cleaning of viscous crude-oil spill. Solar Energy Materials and Solar Cells, 204 (110203). pp. 1-8. ISSN 0927-0248. (Published)

Wei, Ting Tan and Mohd Jamil Mohamed, Mokhtarudin and Yih, Miin Liew and Nasrul Hadi, Johari and Einly, Lim (2019) Biomechanical analysis of distal stent graft induced new entry (SINE) formation in aortic dissection patient. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4.. (Unpublished)

Wei, Ting Tan and Yih, Miin Liew and Mohd Jamil Mohamed, Mokhtarudin and Pirola, Selene and Wan Naimah, Wan Ab Naim and Shahrul Amry, Hashim and Xiao, Yun Xu and Einly, Lim (2021) Effect of Vessel Tortuosity on Stress Concentration at the Distal Stent–Vessel Interface: Possible Link With New Entry Formation Through Biomechanical Simulation. Journal of Biomechanical Engineering, 143 (8). pp. 1-9. ISSN 0148-0731. (Published)

Widodo Budi, Santoso and R. A., Bakar and Sugeng, Ariyono and Nur, Cholis (2012) Study of Cyclic Variability in Diesel-Hydrogen Dual Fuel Engine Combustion. International Journal of Mechanical & Mechatronics Engineering, 12 (4). pp. 52-56. ISSN 2077-124X. (Published)

Widodo Budi, Santoso (2016) Mixture formation and combustion characteristics of diesel-hydrogen dual fuel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Widyarto, Setyawan and Suryasa, I. Nyoman and Khairul Annuar, Abdullah and Fajarianto, Otto and Mohd Shafry, Mohd Rahim and Priyandoko, Gigih and Budaya, Gilang Anggit (2017) Wood texture detection with conjugate gradient neural network algorithm. In: 4th International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2017) , 19-21 September 2017 , Yogyakarta, Indonesia. pp. 1-6.. ISBN 978-1-5386-0549-3

Wong, Choon Chen (2015) Implementation of assembly sequence by arduino and monitoring system using ni myrio. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wong, Fei Yong (2011) Design and fabrication of MIG welding jigs. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wong, Fei Yong and Zulkifli, Ahmad@Manap and Idris, Mat Sahat (2015) Development and Analysis of Arrow for Archery. In: International Conference On Industrial And Design Engineering (INCIDE2015) , 12-13 September 2015 , Putrajaya. pp. 1-7.. (Unpublished)

Wu, Hailong and Depernet, Daniel and Lanfranchi, Vincent and Benkara, Khadija Ei Kadri and M. A. H., Rasid (2021) A novel and simple torque ripple minimization method of synchronous reluctance machine based on torque function method. IEEE Transactions on Industrial Electronics, 68 (1). pp. 92-102. ISSN 0278-0046. (Published)

X

X. X., Jiang and M. S., Saffirna and M. R. M., Rejab and N. K., Romli and Quanjin, Ma (2022) Experiment on different T-joint characteristics for laser-welded I-core galvanized steel sandwich plates. In: Materials Today: Proceedings, 4th Online International Conference on Science & Engineering of Material (ICSEM-2021) , 19 - 22 July 2021 , Virtual Conference, India. pp. 1179-1185., 60 (Part 2). ISSN 2214-7853

Y

Y., Arsyad and Linggam, R. and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and A. Q., Zaifuddin and Qaban, Abdullah (2021) Laser surface modification of duplex stainless steel 2205 to modify the surface roughness. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8695 -8703. ISSN 2180-1606. (Published)

Y. Erny, A. M. Y. and Fadhil, A. R. and Aiman, Mohd Halil and Mahadzir, Ishak and Quazi, M. M. (2021) Comparative study between furnace brazing and laser brazing. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-10., 1068 (012003). ISSN 1757-899X

Yaacob, R. M. and Abdullah, N. A. Z. and Sani, M. S. M. (2022) Structural model updating of bolted joints in dissimilar material structure. In: AIP Conference Proceedings; 2nd International Colloquium on Computational and Experimental Mechanics, ICCEM 2021 , 29 - 30 July 2021 , Virtual, Online. pp. 1-10., 2545 (020017). ISSN 0094-243X

Yadav, A. and Mahendran, Samykano and Pandey, A. K. and Tyagi, V. V. and Devarajan, R. and Sudhakar, K. and Noor, M. M. (2023) A systematic review on bio-based phase change materials. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (2). pp. 10547-10558. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Yadav, Aman and Samykano, Mahendran and Pandey, A. K. and Aljafari, Belqasem and Tyagi, V. V. (2023) Synthesis and characterization of polyethylene glycol-polymethyl methacrylate infused multiwalled carbon nanotube nanocomposite as an efficient thermal energy storage. Materials Today Communications, 37 (107472). ISSN 2352-4928. (Published)

Yadav, B. K. and Rauniyar, P. K. and Sudhakar, K. and Bajracharya, T. R. and Priya, S. S. (2021) Sustainable green campus in Nepal: 3E analysis. International Journal of Low-Carbon Technologies, 16 (2). pp. 531-542. ISSN 1748-1317. (Published)

Yakin, H. N. and Nik Abdullah, Nik Mohamed and M. R. M., Rejab (2021) A quasi-brittle damage model in the framework of bond-based peridynamics with adaptive dynamic relaxation method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8617 -8623. ISSN 2231-8380 (online). (Published)

Yap, H. T. and Ong, Z. C. and Chong, W. T. and Kong, K. K. and Khoo, S. Y. and Z., Ismail and Abdul Ghaffar, Abdul Rahman (2014) Design optimisation of shroud-augmented dual-rotor exhaust air energy recovery wind turbine generator using hybrid non-destructive evaluation approach. In: 6th International Conference on Applied Energy, ICAE 2014 , 30 May - 2 June 2014 , National Taiwan University of Science and TechnologyTaipei, Taiwan. pp. 1266-1269., 61. ISSN 1876-6102

Yap, Huey Tyng (2013) Fluid structural interface analysis of gas flow in oil and gas transmission pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yap, Huey Tyng and Ong, Zhi Chao and Kong, Keen Kuan and Zubaidah, Ismail and Abdul Ghaffar, Abdul Rahman and Chong, Wen Tong (2017) Similitude study of an in-service industrial piping system under high flow induced vibration. Journal of Mechanical Science and Technology, 31 (8). pp. 3705-3713. ISSN 1976-3824. (Published)

Yap, Hwa Jen and Zahari, Taha and Siti Zawiah, Md Dawal and Chang, Siow Wee (2014) Virtual reality based support system for layout planning and programming of an industrial robotic work cell. PLoS ONE, 9 (10). pp. 1-15. ISSN 1932-6203. (Published)

Yap, Suk Wy and Norhasnidawani, Johari and Saiful Amri, Mazlan and Aqida, S. N. and Arifin, Rizal and Noor Azlina, Hassan and Mohd Aidy Faizal, Johari (2023) Superhydrophobic zinc oxide/epoxy coating prepared by a one-step approach for corrosion protection of carbon steel. Journal of Materials Research and Technology, 25. pp. 5751-5766. ISSN 2238-7854. (Published)

Yap, Wee Leong (2016) Development of ironless coreless axial flux permanent magnet generator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yap, Wee Leong and A. R., Razali and Priyandoko, Gigih and Nazrul Idzham, Kasim (2016) Preliminary Studies on Number of Coil Turns per Phase and Distance between the Magnet Pairs for AFPM Ironless Electricity Generator. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38. ISSN 2261-236X

Yap, Wee Leong and A. R., Razali and Priyandoko, Gigih and Nazrul Idzham, Kasim (2016) Review on Automotive Power Generation System on Plug-in Hybrid Electric Vehicles & Electric Vehicles. MATEC Web of Conferences, 38 (02002). pp. 1-11. ISSN 2261-236X. (Published)

Yasin Mustafa, Ahmed and Khairul Saleh, Mohamed Sahari and Basim A., Khidhir and M., Ishak (2015) Optimization of Multi-layer Welding of Titanium Alloy. Research Journal of Applied Sciences, Engineering and Technology, 10 (9). pp. 1029-1034. ISSN 2040-7459 (Print); 2040-7467 (Online). (Published)

Yasir , Hassan Ali and Salah, M. Ali and Roslan, Abd Rahman and Raja Ishak, Raja Hamzah (2016) Acoustic Emission and Artificial Intelligent Methods in Condition Monitoring of Rotating Machine – A Review. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 212-219..

Yatapu, Yaswanth Rao and Reddy, Baridula Ravinder and Ramaraju, Ramgopal Varma and C. K. M., Faizal and Abdullah, Ibrahim (2016) Prediction of Temperatures During Friction Stir Welding of AA6061 Aluminium Alloy Using Hyperworks. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11003-11008. ISSN 1819-6608. (Published)

Yaw, Chong Tak and Koh, S. P. and Sandhya, Madderla and Kadirgama, Kumaran and Tiong, Sieh Kiong and Ramasamy, Devarajan and Sudhakar, Kumarasamy and Samykano, Mahendran and Benedict, F. and Tan, Chung Hong (2023) Heat transfer enhancement by hybrid nano additives—Graphene nanoplatelets/cellulose nanocrystal for the automobile cooling system (Radiator). Nanomaterials, 13 (808). pp. 1-28. ISSN 2079-4991. (Published)

Yaw, Chong Tak and Koh, Siaw Paw and Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Benedict, Foo and Kharuddin, Ali and Tiong, Sieh Kiong and Abdalla, Ahmed N. and Chong, Kok Hen (2023) An Approach for the optimization of thermal conductivity and viscosity of hybrid (Graphene Nanoplatelets, GNPs : Cellulose Nanocrystal, CNC) nanofluids using Response Surface Methodology (RSM). Nanomaterials, 13 (1596). pp. 1-18. ISSN 2079-4991. (Published)

Yazid, Yahya (2009) Optimization of micro EDM drilling process using Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yee, Lee Yin and Muhammad Aizzat, Zakaria (2022) Universiti malaysia pahang autonomous shuttle Development : Lane classification analysis using convolutional neural network (CNN). In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. 61- 70., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Yeong, Choy Huey (2009) Effect of cutting speed and depth of cut on surface roughness of oil-quench mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yip, Hung Sum (2009) The development of embedded positive input shaping for vibration control of a flexible manipulate using PIC. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Yogeswaran, Muthusamy (2012) Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yogeswaran, Muthusamy (2012) Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and K. V., Sharma (2016) Wear Analysis When Machining AISI 304 with Ethylene Glycol/TIO2 Nanoparticle-based Coolant. The International Journal of Advanced Manufacturing Technology, 82 (1). pp. 327-340. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor (2015) Effect of ZnO Nano Materials on Grinding Surface Finishing. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2829-2843. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Yong, Chee Ping (2010) Feasible laser parameters in fabrication of MEMS structures on silicon. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yong, Wai Xhuen and Ahmad Najmuddin, Ibrahim (2020) Field study of PID parameter tuning investigation in peristaltic dosing pump control for use in automated fertilizer mixing system. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 2 (2). pp. 13-22. ISSN 2637-0883. (Published)

Yonghao, Leong and Farah, Alia and Kurniawan, Tedi (2016) High Temperature Oxidation Behavior of T91 Steel in Dry and Humid Condition. Indonesian Journal of Science & Technology, 1 (2). pp. 232-237. ISSN 2527-8045. (Published)

Yousefi, Elnaz and Jaliliantabar, Farzad and Abdul Adam, Abdullah (2023) Exploring the temperature-dependent thermal stability of nano-enhanced phase change materials: An experimental study using eicosane as the base material. Materials Today: Proceedings. p. 79. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Yousefi, Elnaz and Najafi Khaboshan, Hasan and Jaliliantabar, Farzad and Abdul Adam, Abdullah (2023) The effect of different enclosure materials and NePCMs on performance of battery thermal management system. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Material Forum 2022. , 20 July 2022 , Universiti Malaysia Pahang, Pekan, Malaysia,. pp. 1-9., 75 (1). ISSN 2214-7853

Yunus, M. A. and Abdul Rani, M. N. and Aziz Shah, M. A. S. and M. S. M., Sani and Yahya, Z. (2021) The improvement of bolted joints model via finite element model updating method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8635-8643. ISSN 2231-8380 (online). (Published)

Yus Erny Amirah, Mohd Yusof and Muhammad Afiq, Ahmad and Aiman, M. H. and Moinuddin, Mohammed Quazi and Mahadzir, Ishak (2022) Effect of laser frequency and focal length on copper surface temperature during laser heating. In: International Conference on Mechanical Engineering Research (ICMER): Technological Advancement in Mechanical and Automotive Engineering. Lecture Notes in Mechanical Engineering book series (LNME) . Springer Singapore, Singapore, pp. 839-846. ISBN 978-981-19-1457-7 (Online); 978-981-19-1456-0 (Printed)

Yusaf, Talal and Mahamude, Abu Shadate Faisal and Farhana, Kaniz and Wan Sharuzi, Wan Harun and Kadirgama, Kumaran and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Subramonian, Sivarao and Hall, Steve and Dhahad, Hayder Abed (2022) A comprehensive review on graphene nanoparticles : Preparation, properties, and applications. Sustainability (Switzerland), 14 (12336). pp. 1-32. ISSN 2071-1050. (Published)

Yusaf, Talal F. and Faisal Mahamude, Abu Shadate and Kadirgama, Kumaran and Ramasamy, Devarajan and Farhana, Kaniz and A Dhahad, Hayder Abed and Abd Rahim, Abu Talib (2024) Sustainable hydrogen energy in aviation-A narrative review. International Journal of Hydrogen Energy, 52. pp. 1026-1045. ISSN 0360-3199. (Published)

Yusaf, Talal F. and Mohd Kamal, Kamarulzaman and Abdul Adam, Abdullah and Sakinah, Muhamad Hisham and Ramasamy, Devarajan and Kadirgama, Kumaran and Samykano, Mahendran and Subramaniam, Sivaraos (2022) Physical-chemical properties modification of hermetia illucens larvae oil and diesel fuel for the internal combustion engines application. Energies, 15 (8073). pp. 1-17. ISSN 1996-1073. (Published)

Yusof, Hashim (2020) The impact of organizational ergonomic risk factors on musculoskeletal disorders and driving fatigue towards near miss accident amongst Malaysian express bus drivers. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yusof, Hashim and Jinan Basheer, Ahmed and Ismail K., Al-Faluji (2010) Negative Thermal Expansion in Ferromagnetic Fe-Ni Invar Alloys. In: 3rd International Conference on Solid State Science & Technology (ICSSST 2010) , 1-3 December 2010 , Kuching, Sarawak, Malaysia. .

Yusof, M. F.M. and Quazi, M. M. and Aleem, S.A.A. and Ishak, M. and Ghazali, M. F. (2023) Identification of weld defect through the application of denoising method to the sound signal acquired during pulse mode laser welding. Welding in the World, 67 (5). pp. 1267-1281. ISSN 00432288. (Published)

Yusof, MA and Nor Rahman, NH and Siti Zubaidah, Sulaiman and Azizul Helmi, Sofian and Mohd Shaiful Zaidi, Mat Desa and Izirwan, Izhab (2018) Development of low density polyethylene/ graphene nanoplatelets with enhanced thermal properties. In: 2018 IEEE 9th International Conference on Mechanical and Intelligent Manufacturing Technologies , 10-13 Feb 2018 , Cape Town South Africa. pp. 6-9.. ISBN 978-1-5386-4297-9

Yusoff, A. R. and Azmi, W. H. and Hamedon, Zamzuri B. and Saptaji, Kushendarsyah and Osman Zahid, Muhammed Nafis and Shaharudin, Mohd Ali Hanafiah (2018) Characterization of nanocoolant for improving cooling channel design in hot press forming. , [Research Report: Research Report] (Unpublished)

Yusoff, A. R. and Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Che Ghani, S. A. and Osman Zahid, Muhammed Nafis (2019) Suppression of chatter in high speed milling using microcontroller based speed controller by spindle speed variation method. , [Research Report: Research Report] (Unpublished)

Yusoff, A. R. and Yahya, Nafrizuan Mat and Hamedon, Zamzuri B. and Yusoff, Wan Azhar and Shaharudin, Mohd Ali Hanafiah and Osman Zahid, Muhammed Nafis Prototype development of optimum irregular milling tools for chatter supression in machining automotive product. , [Research Report: Research Report] (Unpublished)

Yusoff, A. R. and Yusoff, Wan Azhar and Azmi, W. H. and Shaharudin, Mohd Ali Hanafiah and Osman Zahid, Muhammed Nafis and Hamedon, Zamzuri B. Characterization of thermal conductivity and viscosity of alumina nanocoolant with ethylene-glycerol based fluid for quenching process. , [Research Report: Research Report] (Unpublished)

Yusoff, Wan Azhar (2006) Open architecture pc-based CNC controller. , [Research Report: Research Report] (Unpublished)

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Azhar, Ahmad Syafiq Jazatul and Nelfiyanti, . (2021) The effect of quick response manufacturing in supply chain activities: A case study of automotive company in Malaysia. In: Lecture Notes in Mechanical Engineering; Recent Trends in Manufacturing and Materials Towards Industry 4.0. , 6 August 2020 , Universiti Malaysia Pahang. pp. 547-553.. ISSN 2195-4356 ISBN 978-981-15-9504-2

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Mustapah, M. M. and Nelfiyanti, . (2022) The effect of the supply chain in the quick response manufacturing (QRM) environment in the automotive industry. Procedia Computer Science, 207. pp. 2116-2124. ISSN 1877-0509. (Published)

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Nelfiyanti, . and Hadi, M. Z. I. A. (2021) The effect of quick response manufacturing in factory layout: Assessment using Witness software. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 -20 January 2021 , Pekan, Malaysia. pp. 1-18., 1078 (012027). ISSN 1757-899X

Yusop, Ahmad Fitri Improved oxygenated combustion through alcohol additive dilution approach on a diesel engine for performance and emission enhancement. , [Research Report: Research Report] (Unpublished)

Yusop, Ahmad Fitri Influence of using emulsified palm biodiesel fuel on the performance and pollutants emitted from diesel engine. , [Research Report: Research Report] (Unpublished)

Yusriezal, Mamat (2008) Modeling and simulation of wire electrical discharge machine process in machining aluminium alloy T6 6061. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yuvarajan Naidu, Thanarajan (2012) Design and fabrication of leak test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Z

Z., Ghazalli and M. M., Noor and Zamzuri, Hamedon (2008) Development of Conceptual Technique by Using Integrated Approaches. In: Regional Conference on Vehicle Engineering and Technology, RIVET08 , 15-17 July 2008 , Kuala Lumpur.. .

Z., Ismail and Z., Ibrahim and Ong, A. Z. C. and A. G. A., Rahman (2012) Approach to reduce the limitations of modal identification in damage detection using limited field data for nondestructive structural health monitoring of a cable-stayed concrete bridge. Journal of Bridge Engineering, 17 (6). pp. 867-875. ISSN 1084-0702. (Published)

Z., Zulkfli and Fatchurrohman, Nanang (2021) Advancement in friction stir processing on magnesium alloys. IOP Conference Series: Materials Science and Engineering, 1092 (012006). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Z., Zulkifli and N. H., Abdul Halim and Z. H., Solihin and J., Saedon and A. A., Ahmad and A. H., Abdullah and N., Abdul Raof and Musfirah, Abdul Hadi (2023) The analysis of grid independence study in continuous disperse of MQL delivery system. Journal of Mechanical Engineering and Sciences (JMES), 17 (3). 9586 -9596. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Z. A., Abdul Majid and N., Hazali and M. A. K. M., Hanafiah and Abdul Adam, Abdullah and A. F., Ismail and M. H., Ruslan and K., Sopian and M. S., Mohd Azmi (2012) Design and performance of 20 watts portable solar generator. In: 1st International Conference on Mechanical Engineering Research , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (1). ISSN 1757-899X

Z. M., Hafizi and A. M., Aizuddin and E., Vorathin (2020) Development of temperature-insensitive fibre bragg grating pressure transducer. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012088). ISSN 1757-899X

Z. M., Hafizi and A. M., Aizzuddin and N. I. A., Halim and M. F., Jamaludin (2017) Modal properties investigation of car body-in-white with attached windscreen and rear screen. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012038). ISSN 1757-8981 (Print); 1757-899X (Online)

Z. M., Hafizi and A. M., Aizzuddin and Vorathin, E. (2018) Development of fibre bragg grating (FBG) based pressure transducer with temperature compensation. In: 6th International Conference On Noise, Vibration And Comfort , 05 - 07 Mac 2018 , Putrajaya Dorset, Putrajaya. pp. 1-6.. (Unpublished)

Z. M., Hafizi and C. K. E., Nizwan and D. M., Firdaus (2010) A Study Of Acoustic Emission Intensity Effect During Fuel Injector Fault. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 495-501.. ISBN 978-967-5080-9501

Z. M., Hafizi and Che Ku Eddy Nizwan, Che Ku Husin (2010) High Frequency Acoustic Signal Analysis for Internal Surface Pipe Roughness Classification. In: The International Conference on Experimental Mechanics (ICEM 2010) , 29 Nov. – 01 Dec. 2010 , Kuala Lumpur, Malaysia. .

Z. M., Hafizi and Epaarachchi, J. and Che Ku Eddy Nizwan, Che Ku Husin and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (1). ISSN 1757-899X

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2015) Impact Location Determination on Thin Laminated Composite Plates Using an NIR-FBG Sensor System. Measurement, 61. pp. 51-57. ISSN 0263-2241. (Published)

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2013) An Investigation of Acoustic Emission Signal Attenuation for Monitoring of Progressive Failure in Fiberglass Reinforced Composite Laminates. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1442-1456. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2012) Modal Analysis Of High Frequency Acoustic Signal Approach For Progressive Failure Monitoring In Thin Composite Plates. In: 2nd Malaysian Postgraduate Conference (MPC2012) , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . pp. 61-66..

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2013) Wave Propagation Scattering Due to Defect on Thin Composite Plates. In: Proceedings of the 3rd Malaysian Postgraduate Conference (MPC2013) , 4-5 July 2013 , Sydney, New South Wales, Australia. pp. 80-88..

Z. M., Hafizi and J. A., Epaarachchi (2015) Dynamic Response and Signal to Noise Ratio Investigation of NIR-FBG Dynamic Sensing System for Monitoring Thinwalled Composite Plate. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10..

Z. M., Hafizi and M. M., Noor and R., Mamat and Amir, Aziz and A. T., Termizi (2018) Finite element analysis of strand burner. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Intelligent Manufacturing & Mechatronics . Springer Singapore, Singapore, pp. 705-714. ISBN 9789811087875

Z. M., Hafizi and M. S., Idris and N. M. M., Ammar (2015) Study on the Behavior of Particles in High Reynolds Number in Semi Ellipse Lid Driven Cavity. In: Proceedings of The International MultiConference of Engineers and Computer Scientists 2015, Vol II, (IMECS) , 18-20 March 2015 , Hong Kong. pp. 786-791..

Z. M., Hafizi and Mohd Fadhlan, Yusof and Siregar, J. P. and Lim, Kok Sing (2015) The Applications of FBG sensor for Realtime Strain Mapping of Thin Composite Plate under Point Loading. In: International Conference on Advanced Mechanics, Power and Energy 2015 (AMPE2015) , 5-6 December 2015 , Shah Alam, Selangor. .

Z. M., Hafizi and Muhammad Aizzuddin, Abdullah and Vorathin, E. and Aziman, Abdullah (2018) Fast response fibre bragg grating (FBG) pressure transducer. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Unpublished)

Z. M., Hafizi and Vorathin, E. and A. M., Aizzuddin and K. S., Lim (2019) High-Resolution Fibre Bragg Grating (FBG) Pressure Transducer for Low-Pressure Detection. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (2). pp. 6783-6795. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Z. S., Zahari and Dayangku Noorfazidah, Awang Sh'ri and M. A.H., Abu Hassan and W. S., Wan Harun (2019) Effect of ECAP die angle to the microstructure and mechanical properties of bulk nanostructured Al-6061. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Zafira Adlia, Mohd Fauzi (2020) Development of dynamic programming algorithm for maintenance scheduling problem. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zahari, Taha and Aris, Mohd Azri and Zulkifli, Ahmad@Manap and Mohd Hasnun Ariff, Hassan and Nina Nadia, Sahim (2013) A Low Cost 3D Foot Scanner for Custom-Made Sports Shoes. Advanced Materials Research. ISSN 1022-6680. (Published)

Zahari, Taha and Farzad, Tahriri and Siti Zawiah, Md Dawal (2014) Fuzzy Mixed Assembly Line Sequencing and Scheduling Optimization Model Using Multiobjective Dynamic Fuzzy GA. The Scientific World Journal, 2014. pp. 1-20. ISSN 2356-6140 (print); 1537-744X (online). (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) Landmark Navigation in Low Illumination Using Omnidirectional Camera. In: The 9th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI 2012) , 26-28 November 2012 , Daejeon Convention Center (DCC), Daejeon, Korea. . (Unpublished)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris (2013) The Efficacy of Impact-Absorbing Materials during Collision with a Soccer Ball. Applied Mechanics and Materials, 440. pp. 363-368. ISSN 1662-7482. (Published)

Zahari, Taha and Soewardi, Hartomo and Siti Zawiah, Md. Dawal (2014) Axiomatic Design Principles in Analysing the Ergonomics Design Parameter of a Virtual Environment. International Journal of Industrial Ergonomics, 44 (3). pp. 368-373. ISSN 0169-8141. (Published)

Zahari, Taha and Yusof, Hashim (2014) Ergonomic Assessment on Physical Fatigue among Malaysian Express Bus Drivers: Partial Least Squares (PLS) Approach. In: Proceedings of the Asia Pasific Industrial Engineering & Management System (APIEMS 2014) , 12-15 October 2014 , Jeju, Korea. .

Zahari, Mohamad and Amir, Abdul Razak and Krishnan, Santhana and Singh, Lakhveer and Zularisam, A.W. and Mohd Nasrullah, Zulkifli (2022) Treatment of palm oil mill effluent using electrocoagulation powered by direct photovoltaic solar system. Chemical Engineering Research and Design, 177. pp. 578-582. ISSN 0263-8762. (Published)

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Abdul Ghaffar, Abdul Rahman (2015) Preliminary Investigation on the Development of a Lower Extremity Exoskeleton for Gait Rehabilitation: A Clinical Consideration. Journal of Medical and Bioengineering, 4 (1). pp. 1-6. ISSN 2301-3796. (Published)

Zahari, Taha and Anwar, P. P. Abdul Majeed and M. A., Abdullah and I.M., Khairuddin and M.A., Zakaria and M. H. A., Hassan (2017) The identification and control of an upper extremity exoskeleton for motor recovery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), p. 483. ISBN 9789670257884

Zahari, Taha and H. A., Salaam and Tuan Mohammad Yusoff, Tuan Ya (2015) Triple Bottom Line Optimization for Sustainable Product Design. In: The 16th Asia Pacific Industrial Engineering and Management System Conference , 8-11 December 2015 , Caravelle Hotel, Ho Chi Minh City, Vietnam. . (Unpublished)

Zahari, Taha and Hadi, Abdul Salaam and Tuan Mohammad Yusoff, Tuan Ya and S. Y., Phoon and C. F., Tan and M. A., Akiah (2013) Vortex Tube Air Cooling: The Effect on Surface Roughness and Power Consumption in Dry Turning. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1477-1586. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Zahari, Taha and Mohammad Syawaludin, Syafiq Hassan and Hwa, Jen Yap and Wee, Kian Yeo (2016) Preliminary Investigation of an Innovative Digital Motion Analysis Device for Badminton Athlete Performance Evaluation. Procedia Engineering, 147. pp. 461-465. ISSN 1877-7058. (Published)

Zahari, Taha and Mohd Fadzil, Abdul Rahim and R., Mamat (2017) Injection Characteristics Study of High Pressure Direct Injector for Compressed Natural Gas (CNG) using Experimental and Analytical Method. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-20., 257 (012057). ISSN 1757-8981

Zahari, Taha and Mohd Hasnun Ariff, Hassan (2016) Parametric Analysis of the Influence of Elastomeric Foam on the Head Response During Soccer Heading Manoeuvre. Procedia Engineering, 147. pp. 139-144. ISSN 1877-7058. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan (2017) A Reaction-Force-Validated Soccer Ball Finite Element Model. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231 (1). pp. 43-49. ISSN 1754-338X. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Zulfika, Anuar (2013) Predicting Brain Acceleration During Heading Of Soccer Ball. Materials Science and Engineering, 50. pp. 1-6. ISSN 1757-899X. (Published)

Zahari, Taha and Rabiu Muazu, Musa and M.R., Abdullah and M. H. A., Hassan and M. A. M., Razman and Anwar, P. P. Abdul Majeed (2017) Reliability testing of inertial measurement units in the analysis of physiological variables in archery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 140-141. ISBN 9789670257884

Zahari, Taha and Salaam, H. A. and Phoon, Sin Ye and T. M. Y. S., Tuan Ya and Mohd Razali, Mohamad (2015) Application of integrated sustainability assessment: Case study of a screw design. International Journal of Industrial Engineering, 22 (1). pp. 1-10. ISSN 1943-670X. (Published)

Zahari, Taha and Soewardi, Hartomo and Siti Zawiah, Md Dawal (2012) Color preference of the Malay population in the design of a virtual environment. In: IEEE 18th International Conference on Virtual Systems and Multimedia: Virtual Systems in the Information Society (VSMM 2012) , 2-5 September 2012 , Milan, Italy. pp. 545-548.. ISBN 978-1-4673-2564-6

Zahidah, Ansari (2018) Sandwich square honeycomb structure from biodegradable and recyclable composites. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zahidah, Ansari and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. (2017) Crushing Response of Green Square Honeycomb Structure from Sugar Palm & PLA. Materials Science Forum, 909. pp. 122-126. ISSN 0255-5476. (Published)

Zahidah, Ansari and Tan, Cheng Wen and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and Mohd Zuhri, Mohd Yusuf and Nor Syaza Dinie, Mohd Marzuki (2017) Crushing Behaviour of Composite Square Honeycomb Structure: A Finite Element Analysis. Journal of Mechanical Engineering and Sciences (JMES) , 11 (2). pp. 2637-2649. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zahidah Ansari, Ansari (2013) Wind turbine ( wind mapping ). FACULTY OF MANUFACTURING, Universiti Malaysia Pahang.

Zahrul Adnan, Mat Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and Mohd Asnawi, Omar and Hazlen, Ramli (2016) Dimensional Accuracy Study of Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. Advanced Materials Research, 1133. pp. 280-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zaifuddin, A. Q. and Afiq, M. D. and Aiman, M. H. and Quazi, M. M. and Mahadzir, I. (2022) Effect of laser surface modification on SS316L surface roughness and laser heating temperature. In: Lecture Notes in Mechanical Engineering; International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual Conference. pp. 959-969.. ISBN 978-981-19-1457-7

Zaihin, Mohd Zahib (2012) Development of bicycle powered water pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zaihin, Mohd Zahib (2008) Development of lift machine (using pulley and cable. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zaimi, M. and Azran, M. N. and Kasim, M. S. and Kamal, M. R. M. and Othman, I. S. and Lau, K. T. and Widodo, T. D. and Azizul Helmi, Sofian (2019) Effect of heat treatment on the tribological performance of electroless quaternary nickel alloy. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5637 -5652. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zainah, Md. Zain (2012) Underactuated control for an autonomous underwater vehicle with four thrusters. EngD thesis, Okayama University (Contributors, Thesis advisor: Watanabe, Keigo).

Zainal Ambri, Abdul Karim and Kaur, Eesha and Syed Masharuddin, Syed Muhammad and Khan, Mohammed Yahaya and Hagos, F. Y. (2020) The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer. Alexandria Engineering Journal, 59 (1). pp. 227-237. ISSN 1110-0168. (Published)

Zainal Ambri, Abdul Karim and Khan, Mohammed Yahaya and Abdul Rashid, Abdul Aziz and Hagos, F. Y. (2019) Attaining simultaneous reduction in nox and smoke by using water-in-biodiesel emulsion fuels for diesel engine. Platform: A Journal of Engineering, 3 (2). pp. 1-21. ISSN 2636-9877. (Published)

Zainal Ariffin, Selamat (2018) Optimization of lubrication techniques on machining performance of aluminium alloy 319. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zainal Ariffin, Selamat and A. R., Yusoff and M. M., Rahman (2014) The Effect of Various Diameters Orifice Nozzle Coolant on Surface Roughness Performance in CNC Turning. Advanced Materials Research, 903. pp. 169-173. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zainal Ariffin, Selamat and Alias, M. and A. R., Yusoff and M. M., Rahman (2017) Experimental of surface roughness and tool wear on coolant condition technique using Aluminium alloy 319 used in automotive industries. International Journal of Engineering Research & Science (IJOER), 3 (10). pp. 51-60. ISSN 2395-6992. (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and A. R., Yusoff and M. M., Rahman (2016) Effect of Coolant Nozzle Sizes on Turning Aluminum Alloy AL319. Indian Journal of Science and Technology, 9 (9). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and Nornajmiah, Mohamad and A. R., Yusoff and M. M., Rahman (2016) Effect of CNC Lathe Machining Performance by Varying Coolant Nozzle Diameter. Indian Journal of Science and Technology, 9 (9). pp. 1-4. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainon, S. N. M. and Azmi, W. H. (2020) Forced convection heat transfer and friction factor of water/bio-glycol mixture based TiO2-SiO2 nanofluids. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Pahang, Malaysia. pp. 1-3., 863 (012051). ISSN 1757-8981 (Print), 1757-899X (Online)

Zainon, S. N. M. and Azmi, W. H. and Hamisa, A. H. (2021) Thermo-physical properties of TiO2-SiO2 hybrid nanofluids dispersion with water/bio-glycol mixture. In: Journal of Physics: Conference Series; 2020 International Conference on Innovative Technology and Sciences, ICITSS 2020 , 12 - 13 November 2020 , Kuantan, Virtual. pp. 1-12., 2000 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Zainudin, Muhammad Faiz and Ahmad Shahir, Jamaludin and Mohamad Rusydi, Mohamad Yasin (2022) Effect of the current and pressure on weld strength for IBS rebar machine. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 1-6. ISSN 2636-9575. (Published)

Zainulariffin, Awang (2010) Failure analysis of pipe joint spiral wound gasket using finite element analysis (FEA). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zairul Azrul, Zakaria and Zafri Azran, Abdul Majid and Muhammad Amin, Harun and Ahmad Faris, Ismail and Sany Izan, Ihsan and Kamaruzzaman, Sopian and Amir, Abdul Razak and Ahmad Fadzil, Sharol (2021) Investigation on the thermal performance of evacuated glass-thermal absorber tube collector (EGATC) for air heating application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). 48 -64. ISSN 2289-7879. (Published)

Zakri, Ghazalli (2011) Development of intelligent evaluation system for product end-of-life selection strategy. PhD thesis, Japan , Okayama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Zalinawati, M. and J. P., Siregar and C., Tezara and Jaafar, Jamiluddin and Oumer, A. N. and Norazlianie, Sazali and M. H. M., Hamdan (2020) The effect of fibre treatment on water absorption and mechanical properties of buri palm (corypha utan) fibre reinforced epoxy composites. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7379-7388. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zalinawati, Muhamad (2021) Performance of buri palm (corypha utan) reinforced epoxy composite : effect of alkali treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zamani, Ngali and Kahar, Osman and Nasrul Hadi, Johari (2012) Splitting solver with immersed boundary extension for the analysis of backward-facing step flow. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1040-1048., 1440 (1040). ISSN 0094-243X

Zambri, Harun and Nor Kamaliana, Khamis and Mohamad Dali, Isa and Zamri, Mohamed and Hashimah, Hashim (2013) The Roles of Professional Engineers at the Institutions of Higher Learning in Nation-Building. International Education Studies, 6 (6). pp. 137-142. ISSN 1913-9020. (Published)

Zamri, Mohamed (2010) Designing Driver Space for Large Car. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Zamri, Mohamed and Egab, Laith and Wang, Xu (2012) Tyre Cavity Coupling Resonance and Countermeasures. In: Proceedings of the 4th International Conference on Noise, Vibration and Comfort (NVC 2012) , 26-28 November 2012 , Hotel Melia, Kuala Lumpur. pp. 7-12..

Zamri, Mohamed and Mohd Yusof, Taib and Mohamed Reza Zalani, Mohamed Suffian (2010) Assessment Method for Course Outcome and Program Outcome In Outcome Based Education (OBE). In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2010) , 28-29 June 2010 , Melaka, Malaysia. .

Zamri, Mohamed and Rosnah, Mohd Yusuff (2007) Automotive Ergonomics: Passenger Cars Interior Dimension Parameters and Comfort. In: International Conference On Ergonomics (ICE2007) , 3-5 Dec 2007 , Universiti Malaya, Kuala Lumpur, Malaysia. .

Zamri, Mohamed and Sainty, Samuel and Tawaf, Anthony and Richard, Jonathon and Wang, Xu (2012) Analysis Of Potential Solutions To Audible Tire Cavity And Rim Coupling Resonance Noise. In: ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012 , 19-22 August 2012 , New York City, USA. pp. 15-21..

Zamri, Mohamed (2015) Tire Cavity Resonance Mitigation using Acoustic Absorbent Materials. Journal of Vibration and Control. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Zamri, Mohamed and Che Ku Eddy Nizwan, Che Ku Husin and Mohd Razali, Hanipah (2018) Vibration assessment on plant blower structure. In: 47th International Congress and Exposition on Noise Control Engineering , 26 - 29 Ogos 2018 , Chicago USA. pp. 1-6.. (Unpublished)

Zamri, Mohamed and Mohd Redza, Abdul Razak (2009) Prediction of Car Ground Clearance. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

Zamri, Mohamed and Wang, Xu (2016) A Deterministic and Statistical Energy Analysis of Tyre Cavity Resonance Noise. Mechanical Systems and Signal Processing, 70-71. pp. 947-957. ISSN 0888-3270. (Published)

Zamri, Mohamed and Wang, Xu (2015) A Study of Tyre Cavity Resonance and Noise Reduction using Inner Trim. Mechanical Systems and Signal Processing, 50-51. pp. 498-509. ISSN 0888-3270. (Published)

Zamri, Mohamed and Wang, Xu and Ren, He and Liang, Xingyu and Shu, Hongli (2014) A Study of Tyre, Cavity and Rim Coupling Resonance Induced Noise. International Journal Vehicle Noise and Vibration, 10 (12). pp. 25-49. ISSN 1479-1471 (print); 1479-148X (online). (Published)

Zamri, Mohamed and Xu, Wang and Reza, Jazar (2016) Structural-Acoustic Coupling Study Of Tyre-Cavity Resonance. Journal of Vibration and Control, 22 (2). pp. 513-529. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Zamri, Mohd Fawzi and Jamil, Norlida and Yusoff, A. R. (2020) Effect of rake angle and feed rate on wear and roughness in machining carbon steel 1045. In: 7th Mechanical Engineering Research Day (MERD'20) , 16 December 2020 , Kampus Teknologi UTeM (virtual), Melaka. pp. 355-356.. ISBN 978-967-2454-36-6

Zamzuri, Hamedon and M. S. M., Sani (2009) Characterization Of The Response Of Synthetic Bone Substitute To Compressive Load. In: AUN/SEED-Net Regional Conference 2009 , 16 -17 February 2009 , Equatorial Hotel Penang, Malaysia. . (Unpublished)

Zamzuri, Hamedon and Mori, K. and Abe, Y. (2014) In-situ Measurement of Three-dimensional Deformation Behaviour of Sheet and Tools During Stamping Using Borescope. Journal of Materials Processing Technology, 214 (4). pp. 945-950. ISSN 0924-0136. (Published)

Zamzuri, Hamedon and Mori, Ken-ichiro and Abe, Yohei (2014) Hemming for Joining High Strength Steel Sheets. Procedia Engineering: The Engineering of Sport 10, 81. pp. 2074-2079. ISSN 1877-7058. (Published)

Zamzuri, Hamedon (2016) Multi-Axial Clamp Assemble. In: The Invention & New Product Exposition (INPEX) 2016 , 7-9 June 2016 , Pittsburgh, United States of America. p. 1..

Zamzuri, Hamedon and Ammar Zakwan, Abdullah and Ismayuzri, Ishak and Muhammad Hasnulhadi, Mohammad Jaafar (2022) Non-vibrate palm oil tree harvesting cutter using DC motor. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 529-535., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Zamzuri, Hamedon and Azmir, Azhari and A. R., Yusoff (2018) In-Situ Measurement of Electrode Wear During EDM Drilling using Vision System. Journal of Advanced Manufacturing Technology, 12 (1). pp. 513-524. ISSN 2289-8107. (Published)

Zamzuri, Hamedon and M. Nafis, O. Z. and Z., Ghazalli and M. M., Noor (2008) Design, Fabrication and Testing of New Invented Spring Sickle Pole "ZappIt®" for Palm Harvesting. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

Zamzuri, Hamedon and Razemi, M. N. I. and Azmir, Azhari and A. R., Yusoff (2016) In-Situ Measurement Of Electrode Wear During Edm Drilling Using Vision System. In: 5th International Conference On Design And Concurrent Engineering (IDECON 2016) , 18-21 September 2016 , Langkawi, Malaysia. pp. 1-5.. (Unpublished)

Zamzuri, Hamedon and Siti Haryani, Tomadi and M. M., Noor and M. N. O., Zahid (2008) Design and Fabricate the Prototype of a Motorized Cutter for Harvesting Palm Fruit. In: Design and Fabricate the Prototype of a Motorized Cutter for Harvesting Palm Fruit , 16~17 Dec 2008 , KLCC, Malaysia. . (Unpublished)

Zamzuri, Hamedon and Yohei, Abe and Ken-Ichiro, Mori and Naoya, Nakagawa (2018) Thickened holes edge including compressed rollover for improving tensile fatigue strength of thick sheet. In: Metal Forming 2018, 17th International Conference On Metal Forming , 16 -19 September 2018 , Loisir Hotel Toyohashi, Toyohashi, Japan. pp. 1-7..

Zarina, Amat Jafar (2009) Design and analyzing of small blade wind turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zarul Shazwan, Zullkafli (2010) Failure of pistons engine using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zawawi, N. M. M. and Azmi, W. H. (2020) Performance of Al2O3-SiO2/PAG employed composite nanolubricant in automotive air conditioning (AAC) system. In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-9., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Zawawi, N. M. M. and Azmi, W. H. (2020) Performance of Al2O3-SiO2/PAG employed composite nanolubricant in automotive air conditioning (AAC) system. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-9., 863 (012052). ISSN 1757-8981 (Print), 1757-899X (Online)

Zawawi, N. M. M. and Azmi, W. H. and Sharif, M. Z. and G., Najafi (2019) Experimental investigation on stability and thermo-physical properties of Al2O3-SiO2/PAG nanolubricants with different nanoparticle ratios. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1243-1255. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Zeol, H. and M. Z., Sulaiman and Hui, H. Z. and H., Ismail and Okawa, T. (2023) Quenching heat transfer characteristics of copper rod in saturated and various subcooled condition. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 361 -377.. ISSN 2195-4356 ISBN 978-981191456-0

Zetty Akhtar, A. M. and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2020) Effect of TiO2 and Al2O3-ethylene glycol-based nanofluids on cutting temperature and surface roughness during turning process of AISI 1018. Energy Security and Chemical Engineering Congress, 736. pp. 1-12. ISSN 1757-899X. (Published)

Zetty Akhtar, A. M. and M. M., Rahman and Kadirgama, K. and Rahman, S. and Maleque, M. A. (2020) Thermal conductivity and viscosity of TiO2/MWCNTs (doped10wt% graphene) - Ethylene Glycol Based Nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 32-46. ISSN 2289-7879. (Published)

Zetty Akhtar, Abd Malek (2017) Effect of nickel doping into solder alloy and its strength between SnCu-Ni/immersion gold joint. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Effect of Immersion Coating Deposition Time on Solder Joint Properties. Advanced Materials Research, 1133. pp. 361-365. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2014) Effect of Nickel addition on Intermetallic Compound Properties of Sn-Cu Solder Alloy. In: International Conference on Electronics Packaging , 23-25 April 2014 , Jepun. .

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2014) Microstructure Evolution at the Solder Joint During Isothermal Aging. In: IEEE 36th International (IEMT) Electronics Manufacturing Technology Conference (IEMT 2014) , 11-13 November 2014 , Johor Bahru. pp. 1-5.. ISBN 978-1-4799-8209-7

Zetty Akhtar, Abd Malek and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2020) An experimental investigation on thermal conductivity and viscosity of graphene doped CNTs /TiO2 nanofluid. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 8224-8233. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Zetty Akhtar, Abdul Malek and Md Mustafizur, Rahman and Kadirgama, Kumaran and Saidur, Rahman and Wahaizad, Safiei (2021) Effects of temperature and concentration on thermophysical properties of TiO2-MWCNTs -doped graphene nanofluids. In: 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 920-925., 48 (4). ISSN 2214-7853

Zhang, Yixuan and Gaggiano, Joseph D. and Yongsatianchot, Nutchanon and Nurul Mubinah, Suhaimi and Kim, Miso and Sun, Yifan and Griffin, Jacqueline A. and Parker, Andrea Grimes (2023) What do we mean when we talk about trust in social media? A systematic review. In: Conference on Human Factors in Computing Systems - Proceedings; 2023 CHI Conference on Human Factors in Computing Systems, CHI 2023 , 23-28 April 2023 , Hamburg. pp. 1-22. (670). ISBN 978-145039421-5

Zolpakar, N. A. and Mohd Fuad, Yasak and Pathak, Sunil (2021) A review: Use of evolutionary algorithm for optimisation of machining parameters. International Journal of Advanced Manufacturing Technology, 115 (1-2). 31 -47. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Zuhaira, Abdullah (2020) Analysis of long-chain alcoholbiodiesel-diesel tri-fuel blends on combustion characteristics, engine performances and exhaust emissions of diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Zuhaira, Abdullah and Abdul Adam, Abdullah and Hazrulzurina, Suhaimi and Mohd, Akmal (2019) Impact of diesel-biodiesel-hexanol tri-fuel blends on the combustion and exhaust emissions characteristics of a diesel engine. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (1). ISSN 1757-8981

Zuhaira, Abdullah and Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mohd Firdaus, Taufik and Mrwan, Anes G. (2018) Effect of pentanol-diesel fuel blends on thermo-physical properties, combustion characteristics, engine performance and emissions of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5435-5450. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zuhaira, Abdullah and Mohamad Heerwan, Peeie and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak (2022) Investigation of the combination of kinematic path planning and artificial potential field path planning with PI controller for autonomous emergency braking pedestrian (AEB-P) System. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 285-297., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3

Zul, M. H. and Ishak, M. and Nasir, R. M. and Aiman, M. H. and Quazi, M. M. (2023) Effect of laser-textured surface of Ti6Al4V on frictional wear behavior. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (1). pp. 10165-10174. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zul, M. H. and Mahadzir, Ishak and Aiman, Mohd Halil and Quazi, M. M. (2021) Influence of laser power in nanosecond laser texturing for a hydrophobic state on SS316L. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8592 -8600. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zul Fadli, Mohamad Tohid (2013) Automatic control valve using servo motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulaikah, Zulkifely (2009) The development of positive input shaping for anti-sway control of a gantry crane system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Zulhelmi, Zainal (2007) Development scale model of steam engine with Stephenson gearing system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulhelmi, Ismail (2022) Laser writing of graphene on cellulose paper and analogous material for green and sustainable electronic: a concise review. Carbon Letters, 32 (5). pp. 1227-1245. ISSN 1976-4251. (Published)

Zulhelmi, Ismail and Wan Farhana, Wan Idris and Abu Hannifa, Abdullah (2022) Graphene-based temperature, humidity, and strain sensor: A review on progress, characterization, and potential applications during Covid-19 pandemic. Sensors International, 3 (100183). pp. 1-13. ISSN 2666-3511. (Published)

Zulhishamuddin, A. R. and S. N., Aqida (2014) Development High Thermal Conductivity Tool Steel on Hot Press Forming: An Overview. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10..

Zulhishamuddin, A. R. and S. N., Aqida and Mohd Rashidi, Maarof (2018) A comparative study on wear behaviour of Cr/Mo surface modified grey cast iron. Optics & Laser Technology, 104. pp. 164-169. ISSN 0030-3992. (Published)

Zulhishamuddin, Abd Rahman (2018) Laser surface modification of Cr-MO powders on grey cast iron for surface properties improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Zulkefle, Mohamad Hafizie and Abdul Ghani, A. S. (2022) Investigation of rectangular shape object detection and classification using python. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 32-39. ISSN 2637-0883. (Published)

Zulkifli, Ahmad and Mohd Najeb, Jamaludin and Abdul Hafidz, Omar (2018) Development of Wearable Electromyogram for the Physical Fatigue Detection During Aerobic Activity. Movement, Health & Exercise (MoHE), 7 (1). pp. 15-25. ISSN 2231-9409. (Published)

Zulkifli, Ahmad and Ponnusamy, Barath and Z., Ghazalli (2016) Finite Element Analysis Approach on 3D Modeling of Archery Bow Design. In: Conference Proceedings: The 4th Annual Conference on Engineering and Information Technology (ACEAIT 2016) , 29-31 March 2016 , Kyoto, Japan. pp. 413-418..

Zulkifli, Ahmad and Yong, Wong Fei and Mong, Tan Choon and Idris, Mat Sahat and Zakri, Ghazalli (2017) Development of the wireless goniometer in measuring range of motion for lower extremities. Advanced Science Letters, 23 (6). pp. 5107-5111. ISSN 1936-6612. (Published)

Zulkifli, Ahmad and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azrul, Hisham and Nasrul Hadi, Johari and K., Kadirgama (2014) Biomechanics Measurements in Archery. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 762-771. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zulkifli, Ahmad@Manap and A. K., Ariffin (2012) Monte Carlo analysis of the human vertebra based on compressive loading. International Journal of Mechanical & Mechatronics Engineering, 12 (5). pp. 69-73. ISSN 2077-124X. (Published)

Zulkifli, Ahmad@Manap and Ahmad Kamal, Ariffin and Mohd Akramin, Mohd Romlay (2014) Probabilistic Model of Surface Crack on the Lumbar Vertebra. Applied Mechanics and Materials, 471. pp. 299-305. ISSN 1662-7482. (Published)

Zulkifli, Ahmad@Manap and K., Kadirgama (2013) Optimization of The Surface Crack on The Human Lumbar Vertebra. In: The 9th International Conference on Fracture and Strength of Solids 2013 , 9-13 June 2014 , Jeju, Korea. pp. 1-8.. (Unpublished)

Zulkifli, Ahmad@Manap and Mohd Aminuddin, Pi Remli and Mohd Haziq, Nordin and Nasrul Hadi, Johari and Z., Ghazalli and K., Kadirgama (2015) The Performance of Kicking by Different Boots Material. Journal of Human Sport and Exercise, 10 (Proc 2). pp. 657-665. ISSN 1988-5202. (Published)

Zulkifli, Ahmad@Manap and Mohd Najeb, Jamaludin and Abdul Hafidz, Omar (2018) Monitoring and Prediction of Exhaustion Threshold during Aerobic Exercise Based on Physiological System using Artificial Neural Network. Journal of Physical Fitness, Medicine & Treatment in Sports., 3 (5). pp. 1-4. ISSN 2577-2945. (Published)

Zulkifli, Ahmad@Manap and Mohd Najeb, Jamaludin and Kamaruzaman, Soeed (2019) An effect of physical exercise-induced fatigue on the vital sign parameters: A preliminary study. Malaysian Journal of Fundamental and Applied Sciences, 15 (2). pp. 173-177. ISSN 2289-5981. (Published)

Zulkifli, Ahmad@Manap and Mohd Najeb, Jamaludin and Ummu Kulthum, Jamaludin (2019) Physical fatigue prediction based on heart rate variability (HRV) features in time and frequency domains using artificial neural networks model during exercise. In: 6th Movement, Health & Exercise Conference and 12th International Sports Science Conference , 30 September - 2 October 2019 , Kuching, Sarawak, Malaysia. pp. 1-6.. (Unpublished)

Zulkifli, Ahmad@Manap and Tan, Choon Mong (2016) Development of Portable Biofeedback Devices for Sport Applications. In: Proceedings of the 2nd International Colloquium on Sports Science, Exercise, Engineering and Technology 2015 (ICoSSEET 2015). Springer, Singapore, pp. 55-66. ISBN 978-981-287-690-4 (print); 978-981-287-691-1 (online)

Zulkifli, Ahmad@Manap and Ummu Kulthum, Jamaludin and Aishah, A. F. Q. A. and Najeb, J. M. (2019) Development of wearable electromyogram (EMG) device for upper extremity in aerobic exercise. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012085). ISSN 1757-899X

Zulkifli, Aidisyahrul Hanif and Mohd Khairuddin, Ismail and Anwar, P. P. Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Virtual driving simulation for pedal error study. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 24-31. ISSN 2637-0883. (Published)

Zulkifli, Syafiq and Othman, Fahmi and Awad, Omar I. and Abdul Adam, Abdullah (2017) The Study of Stability, Combustion Characteristics and Performance of Water in Diesel Emulsion Fuel. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01022). ISSN 2261-236X

Zulkifli, Yusof (2009) The analysis of wing performance for reconnaissance UAV. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zuraifah, Kamarudin (2012) Machinability study on drilling austenite stainless steel 316l1 using minimum quantity lubrication (MQL) on surface roughness. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Zuraila, Iberahim and Mohd Zamzuri, Mohammad Zain and Abdul Halim, Ismail and Juliawati, Alias and Muhammad Aiman, Ahmad Fozi and Nooraizedfiza, Zainon and Marina, Marzuki (2022) Image processing approach for detection and quantification of corrosion behaviour of AZ91D magnesium alloy. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 1047-1055., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhamad, Mat Noor and Rosli, Abu Bakar and Subramonian, Sivarao and Talal, Yusaf and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2023) Enhancing Heat Transfer in Compact Automotive Engines using Hybrid Nano Coolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943. (Published)

Zuryaty, Zol (2016) Kolokium Penyelidikan UMP dan Sapura Industrial Berhad. UMP News . (Unpublished)

This list was generated on Tue Mar 19 11:59:42 2024 +08.