UMP Institutional Repository

Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy

M. M., Noor and K., Kadirgama and M. M., Rahman and H. H., Habeeb and B., Mohammad (2010) Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy. International Journal of Material Forming, 3 (1). pp. 475-478.

[img] PDF
Performance_Of_Carbide_Cutting_Tools_When_Machining_Of_Nickel_Based_Alloy.pdf
Restricted to Repository staff only

Download (2MB)

Abstract

This paper was investigated the behavior of cutting tools when machining of nickel based alloys 242. Experiments were conducted using four different cutting tool materials under wet condition. Tool failure modes and wear mechanism were examined at various cutting parameters. Flank wear found to be the predominant tool wear for all cutting tools especially with CVD tools. Attrition lead to exposure and build up edge of the wear mechanisms were observed in all cutting tools. Coating is observed to be delaminated as main phenomena on cutting tools surfaces. The obtained results are PVD cutting tools perform better than CVD in terms of tool life with machining parameters.

Item Type: Article
Additional Information: Prof. Dr. Md Mustafizur Rahman (M. M. Rahman) Dr. Kumaran Kadirgama (K. Kadirgama) Muhamad Mat Noor (M. M. Noor)
Uncontrolled Keywords: Flank wear; Surface roughness; Tool wear; Tool life; Nickel alloy 242
Subjects: T Technology > TJ Mechanical engineering and machinery
Faculty/Division: Faculty of Mechanical Engineering
Depositing User: Pn. Hazlinda Abd Rahman
Date Deposited: 12 Mar 2012 06:51
Last Modified: 25 Jan 2018 07:27
URI: http://umpir.ump.edu.my/id/eprint/2232
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item