UMP Institutional Repository

A study on the development of local exhaust ventilation system (LEV’s) for installation of laser cutting machine

Harun, Safiq Irsyad and Siti Rabiatull Aisha, Idris and N., Tamar Jaya (2017) A study on the development of local exhaust ventilation system (LEV’s) for installation of laser cutting machine. In: Joining and Welding Symposium 2017, 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (012013). ISSN 17578981

[img]
Preview
PDF
Harun_2017_IOP_Conf._Ser.%3A_Mater._Sci._Eng._238_012013.pdf - Published Version
Available under License Creative Commons Attribution.

Download (458kB) | Preview

Abstract

Local exhaust ventilation (LEV) is an engineering system frequently used in the workplace to protect operators from hazardous substances. The objective of this project is design and fabricate the ventilation system as installation for chamber room of laser cutting machine and to stimulate the air flow inside chamber room of laser cutting machine with the ventilation system that designed. LEV’s fabricated with rated voltage D.C 10.8V and 1.5 ampere. Its capacity 600 ml, continuously use limit approximately 12-15 minute, overall length LEV’s fabricated is 966 mm with net weight 0.88 kg and maximum airflow is 1.3 meter cubic per minute. Stimulate the air flow inside chamber room of laser cutting machine with the ventilation system that designed and fabricated overall result get 2 main gas vapor which air and carbon dioxide. For air gas which experimented by using anemometer, general duct velocity that produce is same with other gas produce, carbon dioxide which 5 m/s until 10 m/s. Overall result for 5 m/s and 10 m/s as minimum and maximum duct velocity produce for both air and carbon dioxide. The air gas flow velocity that captured by LEV’s fabricated, 3.998 m/s average velocity captured from 5 m/s duct velocity which it efficiency of 79.960% and 7.667 m/s average velocity captured from 10 m/s duct velocity with efficiency of 76.665%. For carbon dioxide gas flow velocity that captured by LEV’s fabricated, 3.674 m/s average velocity captured from 5 m/s duct velocity which it efficiency of 73.480% and 8.255 m/s average velocity captured from 10 m/s duct velocity with efficiency of 82.545%.

Item Type: Conference or Workshop Item (Speech)
Additional Information: Indexed by Scopus
Uncontrolled Keywords: Average velocity; Engineering systems; Hazardous substances; Laser cutting machine; Local exhaust ventilation
Subjects: Q Science > Q Science (General)
T Technology > TJ Mechanical engineering and machinery
Faculty/Division: Faculty of Mechanical Engineering
Depositing User: Dr. Siti Rabiatull Aisha Idris
Date Deposited: 17 Apr 2018 06:53
Last Modified: 17 Apr 2018 06:53
URI: http://umpir.ump.edu.my/id/eprint/19940
Download Statistic: View Download Statistics

Actions (login required)

View Item View Item