Mould design and mechanical analysis of the casted material

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Mohd Azuan, Abu Shah (2010) Mould design and mechanical analysis of the casted material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

[img]
Preview
PDF
207Kb

Official URL: http://iportal.ump.edu.my/lib/item?id=chamo:52545&...

Abstract

This report is an outcome of the work carried out in doing and completing final year project, mould design and mechanical analysis of the casted material. Objectives of this project is to design and fabricate the mould for tensile test specimen, following ASTM E8 standard and to study the mechanical properties of the casted materials and its comparison with effect of the cooling rate between water, oil and air. Materials that have been used for mould is mild steel and for casted material is aluminum alloy. Overall, this project was run based on four main steps; design using Solid Work, running a simulation on Master CAM, fabricated using CNC Milling Machine, and finally casting process. Each sample was then tested by Rockwell hardness in order to study the effect of the cooling media to the hardness of casted material for all three cooling media, water, oil and air. It project was done by testing at the outer surface and inner surface of the casted aluminum alloys. The higher value for outer surface hardness test is 49.10 HRB and the higher value for inner surface hardness test is 37.72 HRB. The result shows the hardness of casted material immersed in water has higher value compared to oil and air. Water has proved to be the best mediums for cooling rate compare to oil and air medium. The hardness of aluminium increases with the increasing of cooling rate. Cooling rate decreases with distance from the quenched end, and the hardness also decreases.

Item Type:Undergraduates Project Papers
Uncontrolled Keywords:Founding, Metal castings, Metal castings -- Mechanical properties
Subjects:T Technology > TS Manufactures
Faculty/Division:Faculty of Mechanical Engineering
ID Code:1446
Deposited By: Syed Mohd Faiz
Deposited On:22 Jun 2011 13:41
Last Modified:03 Mar 2015 15:51

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my