An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

M. R. M., Rejab and M. M., Rahman and M. M., Noor and A. N. M., Rose (2008) An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis. .

[img]
Preview
PDF
169Kb

Abstract

This paper presents the mechanical properties of Glass Fibre Reinforce Plastic (GFRP) plates with different fibre volume fraction, Vf by considering both analytical and experimental method. The fibre used is chopped strand mat (CSM) type E-glass fibre where the matrix used is unsaturated polyester resin. The composite plates were prepared by hand lay-up technique. Rule of mixture (ROM) and modified rule of mixture (MROM) were used to predict the performance of the composite plates. Tensile test according to ASTM D 3039 was carried out to obtain ultimate strength and modulus of elasticity of the composite plate with different Vf. Three different composite systems were tested in this study. The actual Vf of the composite plates were justified by burn out test (SIRIM MS 1390:1995). MROM was found had better validity than ROM to be used to estimate the mechanical properties of specimens. The experimental results show that the mechanical properties were improved when Vf is increased. Thus, the influence of fibre volume fraction on the mechanical properties of CSM E- glass fibre/polyester composites has been evaluated.

Item Type:Conference or Workshop Item (Paper)
Additional Information:Proceedings of MUCET2008 ISBN 978-983-42358-4-0 Prof. Dr. Md Mustafizur Rahman (M. M. Rahman) Dr. Mohd Ruzaimi Mat Rejab (M. R. M. Rejab) Ahmad Nasser Mohd Rose (A. N. M. Rose) Muhamad Mat Noor (M. M. Noor)
Uncontrolled Keywords:GFRP, fibre volume fraction effects, mechanical properties
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:1520
Deposited By: Pn. Hazlinda Abd Rahman
Deposited On:11 Aug 2011 15:37
Last Modified:09 Aug 2017 15:46

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my