Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3345-3360. ISSN 1985-9325(Print); 2180-1606 (Online)

[img]
Preview
PDF
1074Kb

Official URL: https://doi.org/10.15282/ijame.13.2.2016.5.0277

Abstract

In this paper a genetic algorithm based multi-objective optimization approach is applied in order to predict the optimal machining parameters for the end milling process of aluminium alloy 6061 T6 combined with minimum quantity lubrication (MQL) conditions using waterbased TiO2 nanofluid as cutting fluid. The optimization is carried out employing a parametric model (in terms of input cutting parameters, i.e., cutting speed, feed rate, depth of cut, MQL flow rate and % volume concentration of nanofluid) and exploiting the capabilities of the MOGA-II algorithm applied to the constrained machining problem. The objective functions selected to optimize are: to minimize the surface roughness; to maximize the material removal rate; and to minimize the flank wear of the cutting tool. The output of the optimization includes several alternative optimal solutions, i.e., Pareto frontier, and the best compromised configuration of the cutting parameters is selected subject to weighted preference

Item Type:Article
Uncontrolled Keywords:MQL; MOGA; Pareto; bubble charts
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:16173
Deposited By: Noorul Farina Arifin
Deposited On:16 Jan 2017 14:44
Last Modified:14 Aug 2017 11:00

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my