Design of Connecting Rod of Internal Combustion Engine: a Topology Optimization Approach

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0

M. S., Shaari and M. M., Rahman and M. M., Noor and K., Kadirgama and A. K., Amiruddin (2010) Design of Connecting Rod of Internal Combustion Engine: a Topology Optimization Approach. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .



This paper presents the design connecting rod of internal combustion engine using the topology optimization. The objectives of this paper are to develop structural modeling,finite element analyze and the optimization of the connecting rod for robust design. The structure of connecting rod was modeled utilized SOLIDWORKS software. Finite element modeling and analysis were performed using MSC/PATRAN and MSC/NASTRAN software. Linear static analysis was carried out to obtain the stress/strain state results. The mesh convergence analysis was performed to select the best mesh for the analysis. The topology optimization technique is used to achieve the objectives of optimization which is to reduce the weight of the connecting rod. From the FEA analysis results, TET10 predicted higher maximum stress than TET4 and maximum principal stress captured the maximum stress. The crank end is suggested to be redesign based on the topology optimization results. The optimized connecting rod is 11.7% lighter and predicted low maximum stress compare to initial design. For future research, the optimization should cover on material optimization to increase the strength of the connecting rod.

Item Type:Conference or Workshop Item (Paper)
Additional Information:Proceeding ISBN: 978-967-0120-04-1 Prof. Dr. Md Mustafizur Rahman (M. M. Rahman) Dr. Kumaran Kadirgama (K. Kadirgama) Muhamad Mat Noor (M. M. Noor) Hj. Amirruddin Abdul Kadir (A. K. Amirruddin)
Uncontrolled Keywords:Topology optimization, connecting rod, finite element analysis, minimum weight, linear static method
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:1778
Deposited By: Pn. Hazlinda Abd Rahman
Deposited On:25 Aug 2011 15:47
Last Modified:25 Jan 2018 15:20

Repository Staff Only: item control page








An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.

Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to