Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine Under Hyperextension Loading

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 

M. M., Rahman and A., Zulkifli and A. K., Ariffin (2011) Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine Under Hyperextension Loading. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan . ISSN 1985-9325(Print); 2180-1606 (Online)

[img]
Preview
PDF
1260Kb

Abstract

The major goal of this study is to determine the stress on vertebrae subjected to hyperextension loading. In addition, probabilistic analysis was adopted in finite element analysis (FEA) to verify the parameters that affected failure. Probabilistic finite element (PFE) analysis plays an important role today in solving engineering problems in many fields of science and industry and has recently been applied in orthopaedic applications. A finite element model of the L2 vertebra was constructed in SolidWorks and imported by ANSYS 11.0 software for the analysis. For simplicity, vertebra components were modelled as isotropic and linear materials. A tetrahedral solid element was chosen as the element type because it is better suited to and more accurate in modelling problems with curved boundaries such as bone. A Monte Carlo simulation (MCS) technique was performed to conduct the probabilistic analysis using a built-in probabilistic module in ANSYS with 100 samples. It was found that the adjacent lower pedicle region depicted the highest stress with 1.21 MPa, and the probability of failure was 3%. The force applied to the facet (FORFCT) variable needs to be emphasized after sensitivity assessment revealed that this variable is very sensitive to the stress and displacement output parameters.

Item Type:Article
Additional Information:Prof. Dr. Md Mustafizur Rahman (M. M. Rahman)
Uncontrolled Keywords:Probabilistic; Finite element analysis; Lumbar spine; Stress; Hyperextension
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Faculty of Mechanical Engineering
ID Code:1855
Deposited By: Pn. Hazlinda Abd Rahman
Deposited On:29 Aug 2011 09:25
Last Modified:09 Aug 2017 15:19

Repository Staff Only: item control page

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my